|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$10.00 Shipping Condition: New Location: Monroe Township, United States Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. ... moreHigh-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket. ★Propane storage tank bla.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. ... moreHigh-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket. ★Propane storage tank bla.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. ... moreHigh-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket. ★Propane storage tank bla.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. ... moreHigh-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket. ★Propane storage tank bla.
Buy It Now
Free Shipping Condition: New Location: Roanoke, United States Set of 2 Heavy 100 Amp Rectifier ---Heavy quality rectifier intended for wind turbine rated for 100 amps continuous usage. ---This item is used to convert ... more3 phase AC to DC. This heavy rectifier is built into a heat sink body that allows unit to keep cool. ---Rectifier has spade terminals which will make for a clean and secure installation. No wondering if your wiring is going to come loose. ---Two mounting holes to secure the body of the rectifier to your mounting box ---This item is not to me confused with a blocking diode to be used in DC motor applications or with solar. Powered by [eBay Turbo Lister] (http://pages.ebay.com/turbo_lister/) The free listing tool. List your items fast and easy and manage your active items. Froo www.froo.
Buy It Now
Free Shipping Condition: New Location: Riverside, United States Introducing the ProSolar C225IMC-1B-G 2.25" Bonding Mid Clamp in a sleek black finish. This 4 pack of mid clamps is the perfect addition to your solar ... morepower setup, ensuring a secure and stable hold for your solar panels. Made by the trusted brand ProSolar, these mid clamps are compatible with a variety of panel sizes and are designed for easy installation. Constructed with high-quality materials, these mid clamps are built to last and provide reliable support for your solar panels. Perfect for use in a variety of settings, including business and industrial applications, these mid clamps are a must-have for any solar power setup.
Buy It Now
Free Shipping Condition: New Location: Roanoke, United States Two used Morning star TS-60 Both units work great One unit with LCD display. one without LCD Please look at photo's.
Buy It Now
Free Shipping Condition: New Location: Roanoke, United States MidNite Solar Whiz Bang Jr For Classic and KID Charge Controllers The Whiz Bang Jr is a current sense module that attaches to the standard [50mv / 500A ... moreShunt] (http://www.midnitesolar.com/productPhoto.php?product_ID=101&productCatName=Accessories&productCat_ID=5&sortOrder=7&act=p) and wires into the [Classic] (http://www.midnitesolar.com/products.php?menuItem=products&productCat_ID=21&productCatName=Charge%20Controllers%20-%20Classics) and [KID] (http://www.midnitesolar.com/products.php?menuItem=products&productCat_ID=43&productCatName=Charge%20Controllers%20-%20KID) Charge Controllers to give Amperage readings from the shunt. This allows for EndAmps to function based on System amps or Classic amps. ---Type 1 environmental rating --- [Warranty] (http://www.midnitesolar.
Buy It Now
Free Shipping Condition: New Location: Roanoke, United States Morningstar Sunkeeper SK-6 Junction Box Mounted Solar Controller Morningstar’s SunKeeper solar controller provides a low cost regulated output directly ... morefrom the solar module to maximize battery life in small solar power applications. The SunKeeper is epoxy encapsulated and rated for outdoor use. By mounting directly to the module junction box and wiring through the junction box knockout, the connection is weather-proof. This eliminates the need for an additional housing for the controller. Key Features and Benefits: --- High Reliability - Rated to 70°C to operate in high temperatures at the solar module. More reliable than controllers mounted inside the junction box. Uses very low on-resistance power MOSFET’s. No need to re-rate. ---Outdoor Rated - ETL approved for outdoor use without an additional enclosure.
Buy It Now
Free Shipping Condition: For parts or not working Location: Fort Smith, United States Plug Power Fuel Cell Stack w/ NTC 110CM2 Short Axis, 36 Cell. I have several of these.
Buy It Now
Free Shipping Condition: New Location: Roanoke, United States The bitterness of low quality is long remembered after the sweetness of low price is forgotten! YOU ARE BIDDING ON ONE WIND TURBINE TOWER LOCKING COLLAR ... moreFITS 1 1/2" PIPE. COLLAR IS 1 15/16" INSIDE DIAMETER. 3' OD YOU CAN USE THIS COLLAR TO SIT A WIND TURBINE ON OR USE IT FOR GUY WIRE RINGS MADE FROM HIGH QUALITY STEEL WITH A HIGH TENSILE STRENGTH 1 LARGE ALLEN SET SCREW FOR REAL TORQUE. ZINC PLATED WON'T RUST! WILL LAST A LIFETIME. AS HEAVY DUTY AS YOU CAN GET(LIFETIME WARRANTY) WE MAKE OUR PRODUCTS WITH YOUR SAFETY IN MIND! BELOW IS AN EXAMPLE OF WHERE THE LOCKING COLLAR IS USED LOCKING COLLAR HELPS THE WIND TURBINE TO SPIN EASIER_ ALSO SEE OUR OTHER EBAY LISTING FOR OUR NEW UPGRADE TAIL KIT. INCLUDES OUR MOUNTING BRACKET, HEAVY DUTY DUAL ARMS.EXTRA WIDE TAIL FIN. FOR EXTRA STABILITY AND TRACKING. The diagram below shows a typical wind setup using parts from Missouri Wind And Solar A REAL STORE WITH REAL PEOPLE YOU CAN ACTUALLY COME IN AND TRY OUR PRODUCTS AND SEE THEM WORKING WE ANSWER THE PHONE AND OUR EMAILS MISSOURI WIND AND SOLAR We do not mark items as gifts or under report values for customs. For International buyers it is strongly recommended to check your own countries tax practices as we do not pay your taxes. Duty or customs fees. We do not over charge for shipping it is simply what the shipping calculator comes up with. Customs fees or taxes are not included in shipping. It is your responsibility to pay them. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-14449b37bdf-0x102-
Buy It Now
$11.25 Shipping Condition: New – Open box Location: San Marcos, United States OSASIS # BV704-4S6SDBN CNG 1/2" Isolation Ball Valve. Ports: 3/4"-16.
Buy It Now
Free Shipping Condition: New Location: Roanoke, United States Midnite Solar MNEDC-QUAD General Use Enclosure The Quad Enclosure is a general use aluminum enclosure from Midnite. This box holds 4 MNEDC 80 (or Outback ... moreOBDC-80) type panel mount breakers. A dimensional drawing is located under the documents tab above. Breakers, busbars and grounding lugs are sold separately. Features ---Listed by ETL for US & Canada ---Enclosure: 16 gauge steel, gray powder coat ---Furnished with 4 breaker knockouts ---Conduit knockouts on each end ---Not recommended for use with cables larger than awg #4 (19mm).
Buy It Now
$10.00 Shipping Condition: New – Open box Location: Chino, United States Condition: New: New Product Type: Self-Priming Diesel Pump Pump type：Diesel pump Inlet and Outlet: 25mm (1 inch) PVC Inlet hose: 2 m Rubber Outlet Hose: ... more4 m Lifting height ：10-15 m Power: 550W Voltage：110（DC），50HZ Noise Level:
Buy It Now
$12.00 Shipping Condition: New Location: Monroe Township, United States Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. ... moreHigh-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket. ★Propane storage tank bla.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. ... moreHigh-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket. ★Propane storage tank bla.
Buy It Now
$3.85 Shipping Condition: New Location: Portland, United States Small 20kn Pulley General Purpose Pulley 4500Lbs/ 20KN Material:Aluminum Alloy Heigth: 8.2CM/ 3.23in Width: 4.4CM/ 1.74in Lenght:2.9CM/ 1.15in A Hole ... moreSize: 13MM/ 1.27in( Will take 9.25MM- 12MM rope or Small) Closed Strength: 4500lbs/ 20KN Color: Red Net weight: 86.5g/ 3.05 Oz We also provide the service of wholesale and OEM manufacturing of this product. If you have interested in it. Please contact us. Instruction A pulley is a simple machine that is used to change the direction of a force in order to lift or move a load. Simple pulleys are formed with one pulley wheel and usually either rope or chain running around the wheel. One end of the rope is tied around the object to be lifted and the other end of the rope is pulled to lift the load. A double pulley system uses two pulleys to lift a load. Which spreads the weight of the object across two pulleys instead of one, making it easier to lift the load. In addition to be used to lift load. The stable and skillful design of the double can be used for rope or wire overhead crossing. The sheave which is made of steel can largely reduce wear and the sheaves on the self-lubricating axle have a perfect effect. Three carabiners can be used on the double pulley at the same time, helping us use the double pulley conveniently. Package included:1 x Small 20kn Pulley General Purpose Pulley/ 20KN Shopping Tip: We promise to deliver goods within 24 hours after receiving your payment! Our delivery time is: Before 4pm from Monday to Saturday(except legal holiday) GMT+8 time) Orders after 4pm will be delivered the next day. GMT+8 time) AMERICAN ORDERS SHIPPING TIME 7-12 business days! Other countries INTERNATIONAL ORDER SHIPPING TIME need 15-25 business days WE PROVIDE YOU WITH A DELIVERY CONFIRMATION RECEIPT FOR EASY TRACKING. Package Tracking: shipping destination shipping method Regular Air Mail ePacket EMS United States USPS Tracking System USPS Tracking System EMS Tracking System Canada Canada Post Tracking System Other destinations China Post Trackin
Buy It Now
$7.07 Shipping Condition: New Location: Houston, United States That’s why system designers of the most mission-critical solar energy installations around the world insist on Morningstar components, and why you should ... moretoo on your next project.
Buy It Now
Free Shipping Condition: New Location: Roanoke, United States XTR27-110 Superior Plates with an expected life span of 10 to 12 years in float service applications. Nominal Voltage 20Hr Capacity CCA MCA RC (min) Energy ... more(kWH) Terminal Posts Dimensions Weight Charging Current* Charging Voltage Float Voltage 12V 110AH 660A 880A 220 1.46 SAE+3/8" STUD 12.7"w x 6.8"d x 8.1"h/8.9th** 68lb 10A-35A 14.4V-14.9V 13.5V-13.8V 25A @ 1.75/Cell 220Min 75A @ 1.75/Cell 60Min Short Circuit Current: 2050A Max Discharge Current: 850A (5s) Internal Resistance: 3.5 mOhms Recommended Charging Options: ---AC Chargers: Any Quality Brand AGM- Smart & Microprocessor controlled- charger with the recommended specs above can be used. ---Vehicle Alternator: 14V-15V. ---RV Converter: 14V-15V. ---Solar Panel: 150W-400W. ---Wind Turbine: 150W-400W.
Buy It Now
Free Shipping Condition: New Location: Roanoke, United States Yaw Bearing OK folks here is the deal I use this stuff and I know what it will and will not do. Plating this thing with "zinc" will not cause this not ... moreto rust. The rollers on this bearing are under constant friction and any applied coating will wear away in short order . These bearings must be packed in grease and when they are they do help DIY wind turbines track better in the wind. However it is an inexpensive part and we find no reason to grand stand and make it seem like it is something it is not for the sake of charging a high $ This listing is for one Yaw Bearing to be used on 1 1/2 inch diameter tower pipes to allow the wind turbine head to turn easily.
Buy It Now
Free Shipping Condition: New Location: Roanoke, United States Outback Power FX/VFX, FRX/VFXR, GS/Radian Inverters Fan Replacement Replacement for the internal cooling fan for Outback FX/VFX, FXR/VFRX, and GS Series ... moreInverter/Chargers. Be sure to power down and disconnect all power sources from the inverter prior to replacement of internal parts. Once connections are turned off, verify with a voltmeter that NO voltage is present.
Buy It Now
Free Shipping Condition: New Location: Austell, United States Specification: 1.Model:LM-3606 2.Input Voltage:AC 110-220V 3.Output Frequency: 50-60Hz 4.USB Output Voltage: 5V 1.8A 5.Battery:lead-acid 12V 4A 6.Solar ... morePanel:18V 12W 7.Bulb: 4*5W LED Bulb 8.Charging Time:16 hours 9.Material:ABS 10.Color:Black 11.Plug: EU plug 12.Battery full: 1 light bulbs for 32 hours, 2 light bulbs for 16 hours,3 light bulbs for 10.5 hours,4 light bulbs for 8 hours Feature： 1.Reusable solar generator, solar charging, environmental protection and energy saving, you can use it in anywhere when there is adequate sunshine. 2.Equipped with usb charging cable, you can charge your electronic products easily with the built-in large capacity battery, you can charge for mobile phones, MP3, MP4, digital cameras and other electronic products.
Buy It Now
Free Shipping Condition: Used Location: Pawtucket, United States
Buy It Now
Free Shipping Condition: New Location: Roanoke, United States Midnite Solar DIN Mount Circuit Breaker 15A 300VDC 1-POLE DIN MOUNT Midnight’s breakers are rated to break the full rated load at the rated voltage repeatedly, ... morewith NO DAMAGE. Always use a properly sized breaker for disconnecting. All MidNite circuit breakers are rated for 100% continuous duty. 300VDC din rail mount breaker. 10,000 AIC MNEPV breakers are the same as CBI QY breakers, and have been evaluated by ETL to 300VDC and are listed for US and Canada. Breaker Torque Value: 20 In-Lbs (2.3NM).
Buy It Now
$12.95 Shipping Condition: New – Open box Location: United States The MidNite Solar MNPV12 is a abasic combiner box for up to 12 MNEPV type breakers or 10 MNTS type fuse holders. Photo shows MNPV12 with either breakers ... moreor fuses. Includes 15 position PV negative bus bar. 15 position ground bus bar, and 200 amp Plus bus bar for breakers and fuses. Plus busbars can be combined or separated to support 2 inverters or charge controllers. Gridtie inverters typically can have PV minuses common. Most charge controllers can have PV minuses common(Exception XW and BlueSky) Breakers/fuse holders sold separately. Description: For 150 VDC charge controllers and 600 VDC gridtie inverters) Gray aluminum type 3R rainproof enclosure with insulating dead front. Will accept 12 150VDC breakers or 10 600VDC fuse holders. Can support two inverters of up to 5 strings each, or a transformerless inverter of up to 5 strings. Listed by ETL for US& Canada Box Size: 16 x 14 x 5" Weight: 8 Lb/s ARRA Compliant. Made in the USA.
Buy It Now
Free Shipping Condition: New Location: Roanoke, United States Outback Power Fan Replacement for Outback FM60 Charge Controller Replacement for the internal cooling fan for Outback FM60 MPPT Charge Controller. This ... moreis the cooling fan for the Outback Power FLEXmax 60 solar charge controller. Very easy installation instructions. The FM60 Fan Kit Includes: - (1) 12 VDC fan - (1) Fan Baffle/Insulator - (4) 8-32 X 1 1/4 Machine Screws Be sure to power down and disconnect all power sources from the charge controller to replacement of internal parts. Once connections are turned off, verify with a voltmeter that NO voltage is present.
Buy It Now
Free Shipping Condition: New Location: Roanoke, United States Model: Morningstar TS-60M. “It is a Morningstar, what do you expect! It is great!”. Detailed battery programming options allow for advanced battery support ... morefor the latest Lithium, Nickel Cadmium, and Lead Acid battery types.
Buy It Now
Free Shipping Condition: New Location: Roanoke, United States They are always on target, capturing every bit of available sunshine. They endure years at sea, harsh Antarctic winters, freezing conditions in the upper ... moreatmosphere on solar powered airplanes, and in a few off-the-map locations.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. ... moreHigh-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket.
Buy It Now
Free Shipping Condition: New – Open box Location: Chino, United States ~Free shipping lower 48 states~[BRAND NEW! DESCRIPTION: These pumps are designed for light oil pumping applications such as diesel fuel. Biodiesel and ... morekerosene. These pumps cannot handle thicker oils such as vegetable oil, transmission fluid or motor oil. Fit with Viton seals, they are 100% biodiesel compatible. Use this pump for fueling vehicles, transfering fluids, filtering fluids& more. Is not for Gasoline fuel. The primary function of this pump is for fueling vehicles with an automatic nozzle(nozzle Not included) The pump will build up pressure to 44 psi max and then be unable to pump anymore. No bypass is needed as the pump will not damage itself when the oil flow is stopped(usually by a nozzel) The pump should not be left on for a long period of time when restricted. As it will wear down the vanes, but it is ok for normal usage. Included with this pump are 2 straight hose barb fittings which use a viton oring to form a proper seal with the pump. Although the fittings on the pump are straight thread. Most NPT fittings can be made to fit when using yellow teflon tape. Contruction: Cast Iron, Induction Motor with aluminum casing, In Built Fitler Easily accessible for cleaning, With self priming pump and bypass valve. Motor: 110V AC 370Watts 60hz Self Priming Flow Rate: 20-60L/Min(5.25-15.75 GPM) Max Pressure: 44PSI(3Bar) Suction Height: 5m(16ft) max Lift: 10m 32ft Continous Duty Cycle, 5" x 9-3/8" x 6-1/4" H P OLICIES Payment: We accept payment by PayPal and credit card. Immediate payment is required. We charge sales tax in California. State taxes will be calculated at checkout. Shipping Information: All orders are shipped within 24 hours of payment clearing. Monday through Friday. Free ship to lower 48 States excluded Alaska and Hawaii. APO/FPO, PR, Guam, VI addresses and Post Office box addresses See shipping on top for more detail. We do ship internationally see our shipping rate. Please note that import duties. Taxes, and charges are not included in the item price or shipping cost. Thes
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Voltage: 110V/60Hz Current: 6.6A Power: 1100W Capacity: 55 gallons (208.2 liters) Temperature: 120°F / 49°C (±10°F / 5°C) Size (D*H): 60 x 88 CM Thickness: ... more1''.
Buy It Now
Free Shipping Condition: New Location: United States Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. ... moreHigh-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. Voltage: 110V/60Hz Current: 6.6A Power: 1100W Capacity: 55 gallons (208.2 liters) Temperature: 120°F / 49°C (±10°F / 5°C) Size (D*H): 60 x 88 CM Thickness: 1'' The package includes: 1X drum thermal blanket.
Buy It Now
$209.28 Shipping Condition: New Location: Providence, United States 28 rpm, and the Slew Drive ( 110Lb total). Key attributes. Gear Ratio. Rated Output Speed. Radial Static Load. Axial Static Load. Radial Dynamic Load. ... moreAxial Dynamic Load.
Buy It Now
Free Shipping Condition: New Location: Roanoke, United States MIDNITE SOLAR MNEAC20-2P 20AMP AC TWO POLE DIN RAIL BREAKER 20 amp din rail mount 120/240 VAC Branch circuit rated 489 two pole. 10,000 AIC. MidNite's ... morebreakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. All MidNite circuit breakers hold 100% rated current independent of ambient temperature. Listed for US & Canada.
Buy It Now
Free Shipping Condition: New Location: Santa Cruz, United States These outputs can also be turned on or off from 1 to 9999 seconds. Accurate to 0.5% (Class 0.5). The CT ratio can be set internally to work with up to ... more5000 amp CTs (no multiplier needed). You can set the outputs to be high or low to drive an external relay.
Buy It Now
Free Shipping Condition: New Location: Roanoke, United States Outback Power FLEXware MATE3 Surface Mounting Bracket FW-MB3-S The MATE3 Mounting Bracket is for surface mounting or wall mounting of the MATE3. The surface-mount ... morebracket allows enough space behind the MATE3 that the CAT5 cable can be brought directly into the MATE3 without routing the cable through a wall. In addition, the bracket can be attached to an existing mounting plate, such as the OutBack FLEXPower ONE assembly. This is usually only done when a bracket is being replaced. NOTE: The cable can be routed into the back of the mounting bracket through an opening in the wall or surface. This cabling method can be used if the cable must be concealed inside a wall or brought from one room to another. Includes mounting screws and bushing.
Buy It Now
Free Shipping Condition: New Location: Santa Cruz, United States Truly Plug-and-Play. EKM Push3 Gateway. • Access your EKM Push data with our web application at encompass.io, the EKM Widget, the EKM Dash software, or ... moreour Open APIs. • Push data directly to the cloud.
Buy It Now
Free Shipping Condition: New Location: Roanoke, United States The Classic is designed to regulate DC input from PV, and Approved Hydro and Wind turbines. Solar, wind and hydro MPPT modes. Sunrise and sunset program ... moreset up. The Classic 150, 200 and 250 are designed to work with 12, 24, 36, 48, 60 and 72 volt battery banks.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. ... moreHigh-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket. ★Propane storage tank bla.
Buy It Now
$6.00 Shipping Condition: New Location: Chino, United States Product Description: ★High-quality nickel-chromium alloy wire, high strength in high temperature environment, not easy to deform after long-term use. ... moreHigh-quality Oxford cloth has excellent sealing performance, good heat insulation effect, and will not affect the surrounding temperature. ★The heating surface and heating surface of the heating blanket have excellent adhesion, high thermal efficiency, uniform heating temperature distribution, stable and gentle, and there will be no local overheating or non-heating. ★The 55-gallon barrel heater adopts a fully-wrapped design, which is flexible and movable. The movable top cover on the top provides a closed and mild thermal environment. The adjustable belt can help the barrel-shaped installation of the heating blanket. ★Propane storage tank bla.
Buy It Now
Free Shipping Condition: New Location: Roanoke, United States The RTS (Remote Temperature Sensor) ensures an OutBack system knows the precise battery temperature so that batteries can be recharged safely and efficiently. ... moreWorks with Outback Power FM series charge controllers or Outback Power FX Series inverters. The OutBack Remote Temperature Sensor (RTS) is a necessary tool for proper battery charging. All OutBack products with integrated battery charging have a temperature compensation system built-in which benefits from the installation of the RTS (included with inverter/chargers). Systems with multiple OutBack products connected to one HUB4 or HUB10.3 require installation of only a single RTS. Features: ---Includes 15' (5M) cable ---Improves battery charging ---Prolongs battery life ---Reduces service cycles ---Prevents overcharging.
Buy It Now
Free Shipping Condition: Seller refurbished Location: East Syracuse, United States Model: 726x525005, Type: I-210, Form: 2S, Class: 200, Volts: 240, Wire: 3, Cycle: 60, Test Amp: 30, Capacity: 320 Amp.
Buy It Now
$13.55 Shipping Condition: New – Open box Location: Pueblo, United States Still sealed in its bag. These were use for off grid wind tower battery banks. One complete kit and a bunch of extras from another kit. All rubber is ... morepliable. Please look at all the photographs carefully. We are happy to answer any questions you have. We love to combine shipping, so check out our store, Hippie Cat Bargains. Please feel free to make an offer, we consider them all.
Buy It Now
Free Shipping Condition: New Location: Greenville, United States GRAINGER APPROVED Drum Heater: 115V AC, 1,500 W Watts, 50°F to 400°F, For 55 gal Drum Capacity. For 55 gal Drum Capacity. 1,500 W Watts.
$35.60 Shipping Condition: New – Open box Location: Salt Lake City, United States Technology: Single Phase String Inverter. Manufacturer: SOLAR EDGE. This item is not eligible for combine. Weight: 26.20 lbs. Local Pick-up. Country/Region ... moreof Manufacture: Israel. Model: SE7600H-US.
Buy It Now
Free Shipping Condition: New Location: Warsaw, United States Material: Stainless Steel (SS304). Qty/Bag: 100. •Double-compression design that accommodates various sizes of wire and cable. •Integrated design allows ... morefor easy insertion by hand. Features & Benefits.
Buy It Now
Free Shipping Condition: New Location: Roanoke, United States 1- Z Type Aluminum Mounting Bracket Kit for Solar Panels 1 Kit Includes Pictured Hardware: ---4 - Aluminum Z Type Mounting Brackets ---8 - Self-Tapping ... moreScrews ---4 - Short Machine Screws ---4 - M6 Nuts Brand new never refurbished Dimensions: 1.34 in (34 mm) x 3.94 in (100 mm) [ ] (http://msm-newage-clicks-v1.onpagepromotions.com/v1/clicks/taglines/cdf4b8a4bada7ecf57cfffc852201997040101/b5cdc5fb783cce29a98a118f6307050e040101/1000) Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Buy It Now
Free Shipping Condition: New Location: Roanoke, United States They are always on target, capturing every bit of available sunshine. They endure years at sea, harsh Antarctic winters, freezing conditions in the upper ... moreatmosphere on solar powered airplanes, and in a few off-the-map locations.
Buy It Now
Condition: Used Location: Spartanburg, United States It is housed in a NEMA 4X enclosure allowing for indoor or outdoor installations. It has an integrated DC disconnect, Max DC input is 1000VDC, maximum ... more# of strings that can be landed internally is 2 + 2 + 2 + 2 = 8 strings.
Buy It Now
Free Shipping Condition: New Location: Roanoke, United States Midnite Solar MNPV-DISCO MNPV Disconnecting Combiner Box MNPV6 DISCO COMBINER Please Note: This is an enclosure only, circuit breakers must be purchased ... moreseparately. The MNPV6 Disco combiner is rated for outdoor use. Designed for combining a max of 6 PV strings rated up to 150VDC, 120 amps total output. The MNPV6 Disco is very flexible. It is ETL listed for AC and DC this allows you to configure it for several different uses. It will work with 1-6 din rail mount, 150V DC breakers. The combiner also works with 1 of our 600 volt DC breakers for a grid tie disconnect you can also install a 240 volt AC breaker with the 600 volt DC breaker to make a complete disconnect for a grid tie inverter. This configuration makes a compact Grid Tie disconnect for those applications where the built in switch won’t do the trick.
Buy It Now
Free Shipping Condition: New Location: Roanoke, United States Free First Class next day shipping....road runner beep beep Dual 40 amp blocking diodes mounted in a foot mount heat sink What in the world is this thing?? ... moreIf you are a newbie its essentially a one way valve for power...typical wind and solar applications include solar e.g. back flow of power discharging the batteries when the sun goes down. Also often used in DIY wind generator designs where a donor motor is used as a generator. Using the diode prevents the battery from powering the motor. There are many other uses but these are the 2 most frequesnt I know of for wind and solar.....They are also used in installation of watts view power meters This item is ideal for use with wind turbines such as those constructed using with Ametek and heavy tradmill motors.
Buy It Now
$32.00 Shipping Condition: Used Location: Canada
Buy It Now
$7.84 Shipping Condition: Open box Location: Ventura, United States Click here to see description.
Buy It Now
$14.09 Shipping Condition: New Location: North Charleston, United States 👍 INCLUSION —Heated filter wrap 24V - 200W. It has 14 gauge wires, and draws 8.4A. Fuel Filter Heater Wrap 11"x6", 200W, 24VDC — Warms Canister Fuel ... moreFilters — Works with Donaldson Filter Combo. Heated Filter Wrap 24V - 200W.
Buy It Now
Free Shipping Condition: New Location: Roanoke, United States They are always on target, capturing every bit of available sunshine. They endure years at sea, harsh Antarctic winters, freezing conditions in the upper ... moreatmosphere on solar powered airplanes, and in a few off-the-map locations.
Buy It Now
Free Shipping Condition: New Location: Roanoke, United States 125VDC Panel Mount Breaker - 3/8" studs. AIC 50,000 at 125VDC. All MidNite circuit breakers can be used at 100% rated current when mounted in a MidNite ... moreenclosure. Always use a properly sized breaker for disconnecting.
Buy It Now
$12.66 Shipping Condition: New – Open box Location: Ventura, United States Click here to see description.
Buy It Now
Free Shipping Condition: New Location: Roanoke, United States
Buy It Now
Free Shipping Condition: New – Open box Location: Chino, United States ~Free shipping lower 48 states~[BRAND NEW! DESCRIPTION: These pumps are designed for light oil pumping applications such as diesel fuel. Biodiesel and ... morekerosene. These pumps cannot handle thicker oils such as vegetable oil, transmission fluid or motor oil. Fit with Viton seals, they are 100% biodiesel compatible. Use this pump for fueling vehicles, transfering fluids, filtering fluids& more. Is not for Gasoline fuel. The primary function of this pump is for fueling vehicles with an automatic nozzle(nozzle Not included) The pump will build up pressure to 44 psi max and then be unable to pump anymore. No bypass is needed as the pump will not damage itself when the oil flow is stopped(usually by a nozzel) The pump should not be left on for a long period of time when restricted. As it will wear down the vanes, but it is ok for normal usage. Included with this pump are 2 straight hose barb fittings which use a viton oring to form a proper seal with the pump. Although the fittings on the pump are straight thread. Most NPT fittings can be made to fit when using yellow teflon tape. Contruction: Cast Iron, Induction Motor with aluminum casing, In Built Fitler Easily accessible for cleaning, With self priming pump and bypass valve. Motor: 110V AC 370Watts 60hz Self Priming Flow Rate: 20-60L/Min(5.25-15.75 GPM) Max Pressure: 44PSI(3Bar) Suction Height: 5m(16ft) max Lift: 10m 32ft Continous Duty Cycle, 5" x 9-3/8" x 6-1/4" H P OLICIES Payment: We accept payment by PayPal and credit card. Immediate payment is required. We charge sales tax in California. State taxes will be calculated at checkout. Shipping Information: All orders are shipped within 24 hours of payment clearing. Monday through Friday. Free ship to lower 48 States excluded Alaska and Hawaii. APO/FPO, PR, Guam, VI addresses and Post Office box addresses See shipping on top for more detail. We do ship internationally see our shipping rate. Please note that import duties. Taxes, and charges are not included in the item price or shipping cost. Thes
Buy It Now
Free Shipping Condition: New Location: South El Monte, United States new_template Diesel Fuel shut off solenoid valve Manufacturer Part Number:Cummins 3928161 Woodward No.SA-4293-24 Voltage:24V Fuel shut off solenoid fuel ... morepump 3928161 cummins 6CTA 8.3L Unique Characteristics:Direct in fuel pump Fuel Pump Model:Bosch MW Pump Governor Type:RSV Engine Family:C Series Weight:0.8KG, Work volt 24V. Pull current. 20A. Hold current. 0.3A. Pull force. 28N/25mm. Hold force. 140N. Stroke. 40~45mm. Supplementary stroke. 4~5mm. Working Temp. 40~+100°c. Note:Your valid phone number is very necessary for the shipping.Please provide it when you order. 1 x shut off solenoid 3928161 24V Shipping Item will be shipped within 2-3 business days of cleared payment via Post Airmail. We only ship to buyer's PayPal address. Please confirm your address on PayPal before you bid. Registered air mail takes 10-20 business days to most Countries: US. Canada, UK, Australia and Europe. Optionally. Express Shipments with tracking service via EMS/DHL/UPS takes 5 to 10 business days. We would post the tracking number on the order page as soon as it's available. Important Note: If you have any concern about the purchase, PLEASE feel free to contact us first. We're always ready to help. Please kidly note that this is international shipping. Delay happens occasionally due to unexpected cases. Any customs tax applied to the parcel should be convered by the buyer. Please remember to write your phone number which is necessary for the shipping. Payment We only accept PayPal. Payment must be made within 7 calendar days of the auction end time. Non-Paying bidders will be reported. Refund It is buyer's responsibility to contact us within 30 calendar days of receiving a defective product. Otherwise. No replacement or refund will be made. All items MUST be returned in their original condition. Buyer is responsible for shipping and proof of delivery on all returns. Engineered for professional eBay sellers！ 1t.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpojt%3Af%3E1t-13e108dffe1-0xfb-
|
|
|
|
Dive Xtras X-Scooter Sierra Dive Scooter Fury 1150 Lithium-Ion battery
Less than 5 dives on it. Looks just about brand new. Retails for $6500! Comes with everything in the pictures. What you will receive in the Sierra Package: 1 x Sierra Standard Body and Tail, 1 x Sierra Fury 1150Wh Liion Battery, 1 x Sierra Fury Liion Charger
|
|
|
MULTI-JUNCTION PHOTOVOLTAIC CELL, SOLAR CELL
MULTI-JUNCTION PHOTOVOLTAIC CELL QTY. 1. Multi-Junction Photovoltaic Cell module Item Condition: USED good condition. Per pictures. More than 200 individual units available. Dimensions: 3.546 L x 3.546 W x 2.350 H(inches) Great for solar power project. For items included in this LOT. Please refer to image of assembly, items 2 through 4. These will be shipped FREE via USPS Priority Mail to ALL continental USA-
|
|
|
Sinton Intstruments FMT-350 Light I-V Suns-Voc Solar Module Tester System
You are bidding on a Sinton Instruments FMT-350 Light I-V Suns-Voc Solar Module Tester System that INCLUDES Dell Computer. Sinton Instruments IVTools Software, ProFoto Acute Lighting with Power& Head, Testing Station Components These units are in good cosmetic and working condition. Recently obtained from a working Solar manufacturing company environment. Please see attached images for detailed view of all items included in this complete Solar Module Testing station. This is a Complete System is an Advanced analysis of solar modules including light I-V and Suns-Voc data. Capability to accurately measure high-efficiency modules. The Complete System includes the following: 1) x Sinton Instruments- FMT-350 Light I-V Suns-Voc Solar Module Tester System Features: One-Sun Flash Module Testing Analysis techniques: Suns-Voc curve- 3-point production ... moretesting utilizing Suns-Voc. Jsc, Vload- Efficiency versus intensity characteristic- I-V curves at multiple intensities(1) x Sinton Instruments- IVTools_1.29.4_PC.vi Software(1) x Dell Precision Computer T3400 Intel Core 2 Duo E8400 3GHz 1GB RAM 75GB(1) x Profoto Acute 2 2400 Power Pack& 1) Profoto Acute 2 D4 Flash Head(Key Components) National Instruments PCI-6110 NI DAQ Card 4ch 5MS/sec Analog Input(for PC) National Instruments interface cable to FMT-350(Additional Accessories& Components) Power adapters for Computer. Monitor, Profoto Power Pack- SMC MGPM50N-200 Pneumatic Linear Actuator- Control Air Type 700 Pressure Regulator 0-30 Product Overview: Advanced analysis of solar modules including light I-V and Suns-Voc data. Capability to accurately measure high-efficiency modules. FMT-350 measures any crystalline silicon module. Including high-capacitance, high-effciency modules, using patented electronic load technology" src="http:www.sintoninstruments.com/images/spacer.gif" width=150 height=50 Product Overview" src="http:www.sintoninstruments.com/images/spacer.gif" width=150 height=12 The FMT instrument has been designed to have the
|
|
|
Solar Collector Tracking Positioner48 to 90KW capacity?
2859- We have 1000's of Industrial/Laboratory equipment& parts items-See the categories on the left below- Husky Mann-Russell Solar Collector Tracking Positioner-48 to 90KW capacity? Dishes not included-for display purposes only) FEATURES: 4000# base with rotate and tilt drives 115 VAC 1hp synchronos stepper motor drives ~3000 to 1 gear reduction from 72 rpm drive motors triple chain reduction from 1505:1 inline gear box 10" box beam arms are about 10.5 feet long(500+# each) position encoders included three-finger roller shaft support for the arms 5160# ~24' by 50 by 83" inches raw(50 by 54 by 83 base only) CONDITION: This is a functional unit but there is no automatic tracking controller included. As you can see from the various positions shown. We made the motors run in each direction by directly connecting to the ... morecontrol relays. THE DISHES ARE NOT PART OF THE LISTING-THEY WERE MOUNTED JUST TO SHOW THE CHANGES IN ORIENTATION-THEY ARE AVAILABLE SEPARATELY) CA# 2966 NOTES: don't buy if. TERMS& CONDITIONS: LINKS: CAVLON ITEM CATEGORIES: air compressors& parts, fans& blowers, bio energy fuel diesel components, bulk material handling, computer. Network& telecom, construction equipment& tools, electric motors, electronic parts& assemblies, generators& backup power, hardware& fasteners high voltage components, high pressure components, industrial automation components, industrial electrical components, lab& industrial ovens& furnaces, liquid pumps, machine tools, mechanical parts& assemblies, optical parts& assemblies, pneumatics, power supplies, rf radio frequency components, robotics, test and measurement equipment, ultrasonic equipment, vacuum pumps& components, valves and fittings, video components, wire. Cable& shrink tubing, This unit was designed for solar collector positioning but it could also be used for antenna positioning. It
|
|
|
Original U.S. DOE SOLAR POWER POSTER 1970's Rocky Flats CO Wind View MISPRINT?
We are a fine Used. Rare, and Out-Of-Print book store in Central Florida focusing on automobile and truck books and other non-fiction and transportation subjects including aviation, railroad, and nautical. On eBay we specialize in ONLY FACTORY ORIGINAL Auto Literature(NO RE-PRINTS EVER) and vintage automobile items. And other neat collectibles of all kinds! CHECK OUR OTHER EBAY AUCTION LISTINGS AND EBAY STORE as we are continuously adding new and different items every week. Thanks for looking! FABULOUS. EARLY, AUTHENTIC, VINTAGE, ORIGINAL, U.S. DEPARTMENT OF ENERGY POSTER(misprint? advising us all to"EXPLORE SOLAR ENERGY" See all 4 images below including close-ups- AND see 12" ruler in image for size perspective! Measures 17" X 22" and printed on high quality poster paper. Printed by the U.S. Department of Energy ... moreand, while promoting Solar Energy has a color photo of an early design"WIND MACHINE AT ROCKY FLATS COLORADO" Believed to be a very early Solar Energy poster from circa 1970's or so. And was possibly recalled or not issued because of the apparent contradiction of showing wind power while promoting solar power( BEAUTIFUL- Would look awesome hanging in your office! PRETTY COOL- In near-MINT condition and will be shipped rolled and tubed! IMPORTANT POINTS- PLEASE READ BEFORE BIDDING! INTERNATIONAL BIDDERS please also read"INTERNATIONAL NOTES" Below. ALL ITEMS ARE GUARANTEED to be authentic and ORIGINAL(unless specifically noted otherwise) And are guaranteed to be in the condition described and/or shown. INVOICES for all items are sent through eBay in less than 24-hours from the time the auction ends or the"Buy-It-Now" item is purchased. You do not need to request payment information. If you are purchasing multiple items PLEASE WAIT FOR A COMBINED INVOICE before paying for individual items(see following note regarding USA Shipping Costs) USA SHIPPING COSTS are quoted in the item descriptions for each individual item- The quoted shipping cost for a sin
|
|
|
MULTI-JUNCTION PHOTOVOLTAIC CELL, LOT 12, SOLAR CELL,used on Solar Concentrators
MULTI-JUNCTION PHOTOVOLTAIC CELL QTY. 1 = Lot of 12. Multi-Junction Photovoltaic Cell modules(can be used with a Solar Concentrator) Item Condition: USED good condition. Per pictures. More than 200 individual units available. Dimensions: 3.546 L x 3.546 W x 2.350 H(inches) May vary. Great for solar power project. For items included in this LOT. Please refer to image of assembly, items 2 through 4. These will be shipped FREE via USPS Priority Mail to ALL continental USA- Posted with
|
|
|
Pneumatic Pump STT40:1 for H2 and other gases. Used item Price
Pneumatic Pump STT40:1 has a pressure ratio of 40:1. Uses compressed air from a compressor source to operate. The purpose of the pneumatic pump is to take a source of gas from a lower level of psi and elevate the psi to a required level to operate equipment or to fill a tank. You can use any gas in this pneumatic pump including: Argon. Oxygen, Nitrogen, natural gas, propane Hydrogen, etc. The minimum supply pressure for the compressed air can be 14.5psi to 1450psi which will increase the gas compression to 4350psi on the outlet gas line. The gas inlet is 1/4" connector and the outlet gas connector is 1/4" The compressed air inlet connector is 1/2" This model has one interior chamber and two anterior chambers. Our regular price is $4999.00. Our competitors price is over $5999.00. This is a used item and the price is $2495.00. ... moreSize: 21"L x 10"H x 7"W. Special Sale: $1295. 50% below cost. For use with H2 and other gases. Fill your own tanks with compressed Hydrogen fuel or some other type of gas or fuel.
|
|
|
PDF Copy Owner's Manual - STIRLING Engine Cycle Sun Solar Motor Parabolic Mirror
Item Details: Title: PDF Copy Owner's Manual- STIRLING Engine Cycle Sun Solar Motor Parabolic Mirror Description: This sale is for a pdf copy of the owners manual. I will email it to you after the sale and you can print. Save or share it. You will need Adobe Acrobat software to open it. The software is free at adobe.com. The picture is the actual manual that I copied. There are no copyrights on th is manual. The ma nual has seven pages with text and photos and an exploded parts view. $9.99 is your total cost. There are no other shipping or handling charges. Purchasing Details: Payment: We accept Paypal. Contact us for other payment arrangements. Feedback: We leave feedback once a week for those who have paid promptly. If you are happy with your purchase. Please give us the highest rating in DSR's. If you are not happy, please give ... moreus the opportunity to make it right. International Buyers: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. We do not mark merchandise values below the actual sale amount or mark items as"gift" Contact Us: The best way to contact us is by clicking the"Ask a Question Link" within the listing. We can also be reached by phone Monday-Friday from 8AM-3PM EST at 717-458-3934. 01XX
|
|
|
MGI-250 Hydrogen Gas Generator Serviced & ready to gas
MGI-250 Hydrogen Gas Generator. This gas generator was originally manufactured for the jewelry industry for welding precious metals as it has a neutral flame. Non oxidizing or carbonizing. It can produce a minimum of 250 standard liters per hour at 5 psi. It can be hooked up to pressurized water and run 24/7 as it auto fills and has a built in scrubber to clean the gas of moisture and contaminates so the gas can be burned with a clean almost invisible flame with temperatures up to 6000 degrees F. This system is fully serviced by factory trained personnel and ready to be used. 208-220 VAC single phase power input. You could also use an external DC power source to make gas too. This is a complete system to make hydrogen gas. Ask questions if you have them before purchasing. WE CAN CREAT AND SHIP TO EMAIL FOR SHIPPING COST
|
|
|
BOILER OPERATOR'S GUIDE - 1940 FIRST EDITION 8TH PRINTING-BY: HARRY SPRING JR.
ORIGINAL AND RARE 1940 FIRST EDITION EIGHT IMPRESSION(SMALLER THEN THE TENTH IMPRESSION) BOILER OPERATOR'S GUIDE CONSTRUCTION. OPERATION. INSPECTION AND MAINTENANCE OF STEAM BOILERS, WITH 310 TYPICAL STEAM ENGINEER'S EXAMINATION QUESTIONS AND ANSWERS BY HARRY M. SPRING. JR. PUBLISHED MCGRAW HILL BO O K COMPANY. INC NEW YORK AND LONDON 1940 THE PURPOSE OF THIS BOOK IS TO SUPPLY A MODERN HANDBOOK SPECIALIZING ON BOILERS AND BOILER EQUIPMENT. 353 PAGES ARE INDEXED WITH ILLUSTRATIONS AND INSTRUCTIONS BOOK IN VERY GOOD SHAPE ORIGINAL OWNER S NAME IN FRONT OF BOOK BLANK PAGE HARDCOVER
|
|
|
GE Panametrics Zirconia Oxygen Analyzer
The GE Panametrics CGA 351 oxygen analyzer utilizes an zirconia sensor to determine oxygen content in process gases. Microprocessor-based electronics allow the GE Panametrics CGA 351 oxygen analyzer to take measurements from ppm levels to 100 percent oxygen.
|
|
|
GreenVolts Solar ISO Cell board
When Quality Counts. U s ed but in excellent working condition, guaranteed working! Includes: GreenVolts Solar ISO Cell board Alaska. Hawaii, Puerto Rico, etc. Please Contact for shipping quote. Excellent condition and working. 14 days return. 60 days DOA warranty; Buy with absolute confidence! Take a moment to take a look at our excellent feedback! Payment Policy. PayPal and Credit Card is Accepted. Immediate Payment is required after the Winning Bid, Item will be shipped immediately on the same or next business day of receiving full payment, Shipping Policy. Shipping is for within the 48 Contiguous United States ONLY, Alaska. Hawaii, Puerto Rico and all international buyers, please contact. Items Will be Shipped by UPS Ground on the Same or Next Business day of receiving full payment, UPS Tracking Number will be provided, Returns Policy. ... moreThe item is used or seller refurbished unless otherwise noted. Actual Images of item are shown above, Returns accepted within 14 days of receiving the item unless otherwise noted. QC-COMPUTER 695 Quinn Ave. San Jose, CA, 95112 Phone: 510-786-7824
|
|
|
TRACE TECHNOLOGIES 150 KW 3 PHASE GRID TIE INVERTER PV-150 WITH TRANSFORMER
TRACE TECHNOLOGIES 150 KW GRID TIE INVERTER PV-150 WITH TRANSFORMER 3 PHASE TRANSFORMER PRIMARY 480 WYE SECONDARY 480 DELTA SEE PHOTOS ABOVE FOR DETAILS AND ITEM SPECS BUYERS NEEDING FREIGHT QUOTES. PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST. 856-541-8884 YOU MAY PICK IT UP AT OUR SHOP: 430 CHELTON AVE. CAMDEN, NJ 08104, OR HAVE IT SHIPPED UPS OR USPS. SHIPPING CHARGES ARE CALCULATED BY ZIP CODE 856-541-8884(FAX 856-541-8885) HOURS OF OPERATION( 7AM- 3PM EASTERN)UPS PICKS UP AT 12:00 NOON USPS PICKS UP AT 9AM EST. FOR FREIGHT SHIPMENTS PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST.THANKS BACK SHOP BY TOOL ROOM RY.
|
|
|
GreenVolts Solar Inverter Power Board 101598 REV 5 101599 Photovoltaic
Search our eBay Store! GreenVolts Solar Inverter Power Board 101598 REV 5 101599 Photovoltaic SKU: JV-JIM-B-GVIPB101598 Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge GreenVolts Solar Inverter Power Board 101598 REV 5 101599 Photovoltaic P/N: 101598 REV 05.00 PCB P/N: 101599 Physical Condition: Good; no damaged components or traces. We do not have the necessary resources to test this unit. Does not include any cables. Dimensions(L"W"H" 10* 7 1/2* 4 1/8 PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. ... moreINC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units listed, we may be able to acquire more. Please call us for the latest inventory updates. If you're dissatisfied with your purchase.please. Please, ple
|
|
|
Dankoff Solar ETAPUMP EP600A Solar Direct System Controller
This is a system controller for a solar water pump by Dankoff. This is the controller only. Found in the Dankoff ETAPUMP Integrated Solar Pump System ETA-04-300. The casing of this controller has some scratches and scuffs. But as a whole the unit looks like it's rugged for tough environments. There are 8 sets of wires coming out of the unit for a length of nearly 4 feet. Examining all of the screws around the case. And the gaskets of the case, it does not appear that it has ever been opened or tampered with inside. The power button feels responsive. It is noted that there are no user serviceable parts inside. I am selling this in the expectation that this should be a replacement controller. As we do not have the full system. We are unable to fully test. We recommend fully testing yourself during the refund period. We can not process refunds ... moreif the unit has evidence of being opened. Measures 15.5" tall. 7" wide, and 6" deep. Weighs a hefty 10 lbs. I do not have any manuals. Our policies: Please pay within 3 days of your purchase. We only ship within the United States. We ship USPS with delivery confirmation and tracking. We offer FREE shipping. We cannot offer discounts for multiple purchases. We have a 14 day refund policy. If a problem arrises with your order. Let us know immediately so we can take action. Return shipping is the responsibility of the buyer. Once you've happily received your items. Remember to take a second and leave us feedback. It is our policy to leave feedback for our buyers once feedback is left for us because this is the best way to know that a transaction is happily completed. If there are any questions or special circumstances. Let us know as soon as possible. Communication is the key to preventing bad experiences. We make every reasonable attempt to provide a clear and accurate description. Additional pictures can be made available on request. If there are any errors in our listings. Send us a quick note so we can take action.
|
|
|
Battery Racks for Stationary Solar Voltaic System
BR16-GC1-1S Battery Rack. 2 Tier, Single Row manufactured by ETA-Engineering for stationary solar systems can support 16 common 6 Volt battery types BCI-GC2; US-Battery Model US 125. 2000, 2200; Trojan Battery Model T-105; other BCI group GC2 with length of 9.5" to 10.375" Width Rack lenght: 62" Width: 14" height:39" Empty weight: 68 lbs(30.8 Kg) There are 2 x BR16 and 1 BR8(holds 8 batteries. Lenght 32" racks available; all 3 can support 40 batteries. All racks are assembled. Due to weight local pick up preferred. However delivery within 200 miles for $80.00 can be arranged.
|
|
|
Solmetric Suneye 210 Solar survey tool
Solmetric Suneye 210 Solar survey tool Item: PV Solmetric Suneye 210 Solar Survey Tool for analysis of shading& solar access comes with user manual, software CD, lense cap, USB cable, AC charger, This is pretty much the latest& greatest when it comes to solar analysis. A must have tool for every solar professional in order to be able to calculate the projected or expected solar access and shading at a given location. For more info. Please visit Condition: Used. 100% functional and in very good condition. Nicey's accepts payment through Paypal. Nicey's uses either USPS(United States Postal Service) or UPS for domestic shipping. Determined by which is more cost effective. We will combine shipping charges on multiple auctions. Discounts will be reflected on invoice sent at end of auction! Nicey's uses UPS when: A package ... moreweighs more than 13 oz A package needs to be insured for more than $200.00 When a package is shipped to a business(regardless of size) By customer request, Quoted UPS Shipping costs will always include insurance.we promise there will be no surprise surcharges after the auction ends. A Tracking number will be emailed to you as soon as your package is picked up by our UPS representative. Nicey's uses USPS when: A package weighs less than 13 ounces when packaged and is insured for less than $200.00 When Shipping to a PO BOX(If your item is weighs more than 2 LBS. Nicey's will email you requesting a residential address for UPS shipment) By Customer Request, All Packages shipped USPS will be sent with a Delivery Confirmation. Insurance is included in the shipping and handling fee. An Email will be sent to you with a tracking number once we print your shipping label via PayPal. Tracking Email is N/A if paid by check or M/O) Local Pickup: Local Pickup is always encouraged.and its free! Our address is 12 Park Drive. Bridgeton NJ 08302. Google a map and see if it is worth your while! International Shipping: Sorry. But there is NO International Shipping Offered on this Auction! Ple
|
|
|
Amphenol Helios H4 Male Female Solar Connection Cables - Lot of 50 - NEW
Add my Store to your Favorites and receive my email newsletters about new items and special promotions! General Interest, Amphenol Helios H4 Male Female Solar Connection Cables- Lot of 50- NEW Cables lengths are TUV 2.5mm Radox solar power cable 15 x 12" lengths w/ male H4 to panel connection 15 x 12" lengths w/ female H4 to panel connection 20 x 30" lengths w/ panel to panel connection All cables are new. PAYMENT: Payment is due upon receipt of your invoice. We accept PayPal payments and all major Credit Cards during the checkout process. We do not collect credit card or personal information. COMBINED SHIPPING: We always adjust shipping costs for multiple items paid for and shipped within the same business day. Items or quantities requiring multiple packages may not receive a discounts on shipping. SHIPPING: We ship using ... moreUPS and the US Postal Service(USPS) We do allow customers to use their own UPS account for overnight or special shipping situations. A packaging fee may be applied to your invoice. It is your responsibility to provide a deliverable ship to address at the time of purchase. Most orders are shipped same day with the exception of freight. Overnight Shipments: We can accommodate most requests. It is recommended that you make your purchase and payment before 3 PM MST. We do not refund overnight shipping costs. A valid phone number is required. Overseas Shipments: We ship USPS Priority Mail International in most cases. Each country has its own unique weight and size restrictions when using USPS. IF your package is over the USPS limits for your country. We will quote you UPS costs. Delivery times vary per country, we do not guarantee delivery times or how long the host country holds a package in customs. we have seen shipments via USPS take as long as 6 weeks. We do not allow self shipping and carrier pickup on non freight packages; we can ship items using your UPS account through our system. We do not ship FedEx, DHL, or any other shipper except UPS and USPS. Overseas Freight: Some item
|
|
|
HHO advanced lab kit
Advanced lab kit manufactured by Square1 Energy. Used only a couple of times. With all the boxes and original packaging. The Advanced Lab Kit is the ultimate tool for serious researchers and HOD developers. In addition to what is included in the Lab Starter Kit. The Advanced Lab Kit includes an Alicat Measurement Device, specifically calibrated to measure HHO gas. The Alicat integrates with the Commander software to provide real-time visualization and monitoring of gas output relative to user adjustable and/or sequenced parameters. This data is logged and stored in a database along with the readouts from any sensors and parameters read directly from the SIC. This provides the ability to determine the correlations between subtle changes made to the cell operating parameters and the gas output of the cell. Included with this package is the ... moreoption to join the HYDRO-MAXX TM Developer Network. If you choose to opt in to this program. Your database and testing results will be integrated with our master database, to which you will have full access. The intention is to provide a wealth of research data to those seriously interested in perfecting HOD technology by incorporating data from as wide a range of sources as possible. Instead of spending days or even weeks testing things that have already been documented elsewhere, the HYDRO-MAXX TM Developer Network will provide serious researchers the means for targeted development of HOD systems for specific applications. Firmly based on a plethora of scientifically acquired data. This package includes: Servo Integrated Controller POM(includes integrated Current Transducer) DB9 → P5 Connector Cable Cat5 Connector Cable Temperature Sensor Power Cable Connector Harness Gas Dryer Filter Assembly Commander L5 Disk(L4 + Data Acquisition. Data Base, Real-Time Graphing) Alicat Measurement Device MSRP 7.000 USD
|
|
|
FuelCon TrueData-CMV 70 Fuel Cell MOnitor
Up for sale is a FuelCon TrueData-CMV 70 Fuel Cell MOnitor. Unit is in good used condition. Comes as shown. Sorry. No other accessories, power supply, documentation or software available. Please ask all questions before purchasing. Satisfaction guaranteed. Buyer may return within 10 days or receipt for a refund(less shipping charges) Please use shipping calculator for actual delivery costs. Although the Ebay shipping calculator shows UPS we will ship via FedEx ground. If you need it quicker. Please contact us. All items are packed with care. I've been buying and selling on Ebay for many years. I try to treat my customers like I would like to be treated as a buyer. If you have any problems with any items purchased through our store. Please contact us immediatly and we will make it right. Before you email me a question. Please check here ... morefor some canned answers to some very common questions: Will you end the auction or sale early? The only way to end the sale early is to"Buy it Now" For the safety of both parties. I do not sell outside of Ebay. Will you ship overseas or to Canada? It may be possible to ship overseas or to Canada depending on the item. Please contact us for details. Do you have any manuals. Accessories, etc for the unit? I do a very good job of listing everything that is included with an item. Everything included is described in the listing and/or shown in the photograph. I'm local. Can I pick up the item? In most cases. No. Only for large bulky items will I consider local pickup. Will you sell a accessory separately or make a copy of a manual or software for me? In most cases no. The accessories provided go with the unit we are selling. If we have any extras they would be listed in our store. We do not copy manuals or software. I will try to answer all questions as fast as possible. Please allow at least 24 hours for answers to most questions. I appologize for all the rules. However. I find it necessary to put these in writing to deal with a small number of"problem" Ebay
|
|
|
KOH Fuel Cell Display System 24 Volt Power Supply
USED 24 Volt Power Supply Used in Fuel Cell Display unit Up for auction is this used 24 Volt Power Supply unit. It measures about 4 1/2" x 4 1/2" x 2" It was part of the display case system. It is working and was tested. It should work fine for someone who has the know how. Last picture shows the Display case and the 24 Volt Power Supply mounted in it. This auction is for the 24 Volt Power Supply ONLY without the case or anything else! PLEASE READ" PAYPAL ONLY" I ONLY SHIP TO LOWER 48 STATES" I have 100% positive feedback and been on eBay over 10 years. Bid with confidence. Please check out my other auctions and my eBay Store"Stretch-A-Dollar" If you have any questions ask before bidding. Thanks for looking and bidding. Powered by The free listing tool. List your items fast and easy and manage your ... moreactive items.
|
|
|
KOH Fuel Cell FLAMMABLE GAS SENSOR GDS-200 GAS ALARM USED
USED two piece GDS-200 FLAMMABLE GAS SENSOR unit Up for auction is this used fuel cell FLAMMABLE GAS SENSOR unit. It measures 10" x 6" x 2" It measures 8" high. 5" wide, 2 1/4" deep. The sensor itself measures 3 1/4" x 3 1/4" x 1 1/2" I have the connector plug taped to it. It was powered by 220volts. It was part of the display case system. I don't know how to test it so it is sold"AS IS" untested. It should work fine for someone who has the know how. Last picture shows the Display case and the FLAMMABLE GAS SENSOR unit mounted in it. This auction is for the FLAMMABLE GAS SENSOR unit and sensor ONLY! PLEASE READ" PAYPAL ONLY" I ONLY SHIP TO LOWER 48 STATES" I have 100% positive feedback and been on eBay over 10 years. Bid with confidence. Please check out my other auctions ... moreand my eBay Store"Stretch-A-Dollar" If you have any questions ask before bidding. Thanks for looking and bidding. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Elhygen Milton Roy ERD-150 Hydrogen generator
milton_roy_erd-150_hydrogen_generator Milton Roy ERD-150 Serfas Elhygen RD NO RESERVE! BUY IT NOW Ask our Sales Personnel for details. Item ID: 314775, Manufacturer: Milton Roy, Model Number: ERD-150, Description: Hydrogen generator, Made in: United States, Weight: 45Lbs, Condition: In use when removed, Cosmetic: Very Good, 115 Volts 1 Amps 60 Hz Have questions regarding this product? Contact us: ebay@megawavz.com Bidders with less than a( 5) rating must contact us prior to bidding otherwise their bids will be removed. Payment must be received no later than 7 working days from the closing date of the auction. Unless discussed with the billing party. In the case that payment has not been received within 7 working days. Groupe Interconnexion reserves the right to open an unpaid auction request.Unless otherwise notified) All Items are subject ... moreto a Packing and Handling Fee of 3% 15$ Minimum) Canadian residents should expect Provincial/Federal taxes to be applied. IMPORTANT: Read our shipping instructions allocated to your region; Canada. USA or International. Alternative buyer's shipping account are also welcome CANADA: A Minimum Shipping Charge of $20.00usd will be applied to all auctions. Higher rates will apply in northern Canada) Upon demand. We'll be happy to provide you a shipping quote. Please state destination city& postal code. If you disagree with our shipping terms. We are open to using your shipping account. If the dimensional weight(calculated using the final dimensions of the packed purchase) exceeds that of the actual item weight. The shipping cost will be calculated based on the dimensional weight. Sorry. We will not ship post mail. USA: A Minimum shipping charge of $25.00usd will be applied to all auctions. Upon demand. We'll be happy to provide you a shipping quote. Please state destination city& postal code. If you disagree with our shipping terms. We are open to using your shipping account. If the dimensional weight(calculat
|
|
|
KOH Fuel Cell Voltage Monitoring Unit Used
USED FUEL CELL VOLTAGE MONITORING UNIT Up for auction is this used fuel cell voltage monitoring unit. It measures 10" x 6" x 2" It measures 10 7/8" high. 7 7/8" wide, 4" deep. It was run by a separate computer system outside the box.I don't know how to test it so it is sold"AS IS" untested. It should work fine for someone who has the know how. Last three pictures show the Display case and the Fuel Cell voltage monitoring unit mounted in it. Seals never broken. Wiring and Plugs will be included. This auction is for the Fuel Cell voltage monitoring unit ONLY! PLEASE READ" PAYPAL ONLY" I ONLY SHIP TO LOWER 48 STATES" I have 100% positive feedback and been on eBay over 10 years. Bid with confidence. Please check out my other auctions and my eBay Store"Stretch-A-Dollar" If you ... morehave any questions ask before bidding. Thanks for looking and bidding. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
KOH Fuel Cell Power Converter Used
USED FUEL CELL POWER CONVERTER 30 VOLT 10A Up for auction is this used fuel cell power converter. It's rated at 30 volts. 10A. All original mounting hardware included. It measures 10 7/8" high, 7 7/8" wide, 4" deep. I don't know how to test it so it is sold"AS IS" untested. It should work fine for someone who has the know how. Last two pictures show the Display case and the Fuel Cell Power Converter mounted in it. This auction is for the Fuel Cell Power Converter ONLY! PLEASE READ" PAYPAL ONLY" I ONLY SHIP TO LOWER 48 STATES" I have 100% positive feedback and been on eBay over 10 years. Bid with confidence. Please check out my other auctions and my eBay Store"Stretch-A-Dollar" If you have any questions ask before bidding. Thanks for looking and bidding. Powered by The free listing ... moretool. List your items fast and easy and manage your active items. 6gf1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*2%60%3E6gf1-13ea636f13c-0xf9-
|
|
|
KOH Fuel Cell Gas 24 Volt Valve Used
USED Fuel Cell Gas 24 Volt Valve Used From Fuel Cell Display Unit Up for auction is this used 24 Volt Valve. It measures about 4" x 3" x 1 1/4" It was part of the display case Fuel Cell System. It is working and was tested. It should work fine for someone who has the know how. Last picture shows the Display case. This auction is for the 24 Volt Valve ONLY without the case or anything else! PLEASE READ" PAYPAL ONLY" I ONLY SHIP TO LOWER 48 STATES" I have 100% positive feedback and been on eBay over 10 years. Bid with confidence. Please check out my other auctions and my eBay Store"Stretch-A-Dollar" If you have any questions ask before bidding. Thanks for looking and bidding. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
KOH Fuel Cell System Control Used
USED FUEL CELL System Control Up for auction is this used fuel cell System Control. It was part of a computer controlled system. No software or manuals are available or will be included with it. All original mounting hardware included. This would make a nice project box. It measures 11" Long. 6 3/4" wide, 2" deep. I don't know how to test it or hook it up so buyer assumes all risk and it is sold"AS IS" Untested. Last two pictures show the Display case and the System Control mounted in it. This auction is for the Fuel Cell System Control ONLY. NOT the display case shown or anything else! If you purchase more than one item wait for my invoice for combined shipping! PLEASE READ" PAYPAL ONLY" I ONLY SHIP TO LOWER 48 STATES" I have 100% positive feedback and been on eBay over 10 years. Bid with confidence. ... morePlease check out my other auctions and my eBay Store"Stretch-A-Dollar" If you have any questions ask before bidding. Thanks for looking and bidding. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LOT OF FIVE KOH Fuel Cell System Control PARTS Used
LOT OF FIVE USED FUEL CELL SYSTEM PARTS Up for auction is this lot of five used fuel cell System parts. It was part of a computer controlled system. No software or manuals are available or will be included with it. This first item in this lot would make a nice project box. It measures 11" Long. 6 3/4" wide, 2" deep. I don't know how to test it or hook it up so buyer assumes all risk and it is sold"AS IS" Untested. Pictures show the other five items listed below in this Lot. Last two pictures show the Display case and the System Control mounted in it. This auction is for the Fuel Cell System Control. Power Converter, Cell Voltage Monitor, Gas Sensor Alarm and Detector, and 24 Volt Power Supply. NOT the display case shown or anything else! These are all packed and ready to ship via UPS! They weigh 22 lbs. See my ... moreother listings for the rest of the parts in a LOT Listing. Thanks for looking. PLEASE READ" PAYPAL ONLY" I ONLY SHIP TO LOWER 48 STATES" I have 100% positive feedback and been on eBay over 10 years. Bid with confidence. Please check out my other auctions and my eBay Store"Stretch-A-Dollar" If you have any questions ask before bidding. Thanks for looking and bidding. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LOT OF 18 KOH Fuel Cell Systeml PARTS Used Lot #1
LOT OF 18 USED FUEL CELL SYSTEM PARTS Lot#1 Up for auction is this Large lot of 18 used fuel cell system parts. It was part of a computer controlled system. No software or manuals are available or will be included with it. Pictures show the 18 items listed below in this Lot. ITEMS LISTED IN THIS LOT; Hi-Low float sensor Gas Flow sensor Gas Sensor Gas Regulator 10 Ohm Load Resistor 10 Ohm Load Resistor 10 Ohm Load Resistor PCB Board Rack of Wiring Connectors With Reset Breaker Black Box of Electronics Black Box of Electronics Wiring and Plug With Socket Wiring and Plug With Socket Wiring with Socket Wiring with Socket Brass"T" Tos Autonics Temperature Controller 25 Amp 230 volt. Breaker on mount. This lot has been discounted much cheaper than the individual sum of all the parts would have been. Last two items on list added at last ... moreminute in separate picture. Is not in the group photo. Last three pictures show the Display case and system diagram. This auction is for the Fuel Cell System parts shown below. NOT the display case shown! These are all packed and ready to ship via Large Flat Rate Priority Mail Box! See my other listings for the rest of the parts in a LOT Listing. Thanks for looking. PLEASE READ" PAYPAL ONLY" I ONLY SHIP TO LOWER 48 STATES" I have 100% positive feedback and been on eBay over 10 years. Bid with confidence. Please check out my other auctions and my eBay Store"Stretch-A-Dollar" If you have any questions ask before bidding. Thanks for looking and bidding. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LOT OF 8 KOH Fuel Cell Systeml PARTS Used Lot #2
LOT OF Eight USED FUEL CELL SYSTEM PARTS Lot#2 Up for auction is this lot of eight used fuel cell System parts. It was part of a computer controlled system. No software or manuals are available or will be included with it. Pictures show the eight items listed below in this Lot. This lot has three BURKERT 24 volt DC valves-3.0 FPM. Two MPL-808-10 PSI-ADJ pressure switches with"T" fitting on each, and three pieces brass compression fittings consisting of 4"T" fittings with 2 valve fittings on them. This lot has been discounted much cheaper than the individual sum of all the parts would have been. Last two pictures show the Display case. This auction is for the Fuel Cell System parts shown below. NOT the display case shown or anything else! These are all packed and ready to ship via Priority Mail! They weigh 6 lbs. See my ... moreother listings for the rest of the parts in a LOT Listing. Thanks for looking. PLEASE READ" PAYPAL ONLY" I ONLY SHIP TO LOWER 48 STATES" I have 100% positive feedback and been on eBay over 10 years. Bid with confidence. Please check out my other auctions and my eBay Store"Stretch-A-Dollar" If you have any questions ask before bidding. Thanks for looking and bidding. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Lot of HHO Dry Cells (2), Bubblers (2), PMW Controller
This is one lot of HHO equipment. It includes 2 dry cells(1 large and 1 small) 2 bubblers(1 large and 1 small) 1 PWM controller on a mounting bracket, 1 AMP meter(0- 50) and 1 PVC separator. This equipment was purchased for a test project. Most pieces were only used a couple of times. All in great shape. Lost interest in the HHO project and now am cleaning out the garage. All sales are"as is" Ships only to the US.
|
|
|
MackTruck Fluid Filter Element
| MackTruck Fluid Filter Element, Click to View Image Album The item that is for auction is a*NEW* MackTruck Fluid Filter Element Hydrocarbon Fuel or Oil Used for powersteering unit 2940-01-407-2809_ These items are NEW OLD STOCK! NOS) This offer comes as pictured. No additional items are included in this Auction. Sorry. But due to the Low Price that we are selling these items for WE CANNOT COMBINE SHIPPING COSTS OF THESE ITEMS. Please do not bid if this is not agreeable. NO RESERVE FOR THIS AUCTION A1-10088 Quoted ground shipping cost at bottom of action page is for continental US shipments only. This excludes Alaska and Hawaii. We do not ship until full amount is paid. If item is picked up. It is subject to a handling fee, which will be determined in the Winning Bidder's e-mail. The sale of this item may be subject to regulation by ... morethe U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. We do not ship overseas; however. If you have someone in the USA we could ship to, they could ship it to you. Thanks for looking! Please Note: NOS parts are made by the OEM. These parts can range from 2 to 75 years old and were made to the standards of the year the part was manufactured. Most NOS parts are in good to excellent condition unless otherwise stated. But please do not expect them to be perfect. Most all of our items are government surplus and as such they are subject to have identifying marks such as etchings or paint or other various markings for use by the government for control purposes. Do not bid if this is not acceptable. Normal 0 false false false EN-US X-NONE X-NONE Quoted ground shipping cost at bottom of auction page is for continental US shipments only. This excludes Alaska and Haw
|
|
|
HydroGen Micro Generator Precision Soldering Unit - As Is, Not Fully Tested
Up for sale is a HydroGen Micro Generator Precision Soldering Unit. This item is used and has heavy wear from average use. The cord in the back is exposed. So please have a close look at the pictures before bidding. It will power on, but has not been tested beyond that. Sold as is. No returns please. Please check my feedback and you’ll see that I’m a trusted seller who deals with quality goods. If there is a problem with the purchase after you have received your item. Please contact me immediately, as I strive for customer satisfaction. Thank you for your time! Immediate payment required. Only ships within the Continental United States(MS) 255978-2 LE(BB) 06/05
|
|
|
hydrogen fuel cell wet 22 18 gauge plates
WELLER ENTERPRISE!22 PLATE HYDROGEN WET FUEL CELL! If you know anything about fuel cells then you know that a 23 cell wet cell is huge. It puts enough H2 out to run my motor cycle without any gas. Ive had this cell in my car for the past year. I only took it out to replace it with my new 100 plate cell. I hope it goes to a good home.good luck with it. Please only purchase this cell if you know how fuel cells work. This cell puts out a large amount of H2 and if miss used could produce a huge explosion. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13f1a2b5b0b-0x101-
|
|
|
Air Liquide Hydrogen Fuel Dispensing System
Hydrogen Fuel Dispensing Station Mfg. by Air Liquide for General Motors Co. Used from 2008-2012 to fuel 40 hydrogen/ fuel cell vehicles in the NYC area. All major components complete including piping and dispenser unit. A Sullair S-Energy series 3000/ 40 HP compressor functioned with the unit. The compressor is being offered separately from the hydrogen unit. Compressor is a standard 40 hp 150 psi unit. The nitrogen cooling system tank. Designed to accompany the full system, was leased from Praxair. Reinstallation of the system requires a nitrogen tank to be leased as well. Cost at time of installation: $457.000 Info: 802-342-0293 Shipping Information: Hydrogen unit is installed in a modified 8'W x 20'L cargo container. The container has been modified to carry additional weight and provide ventilation. Total weight of container is ... moreapproximately 37.000 lbs Fuel dispenser: skid dimensions 40"w x 130"l x 48"h Freight quote available with C. H. Robinson Worldwide Inspection by Appointment?265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-13f2ecd5272-0xa4-
|
|
|
1.5 Quart HHO Heavy Duty Bubbler / Reservoir with (12)1/4 Barb Fittings & more
Listing include: 1.5 Quart HHO Heavy Duty Bubbler/ Reservoir with fluid level sensor inside, 11x 1/4' Barb Fittings 90 degrees(18 NPT) 1x 1/4; Barb Fittings straight(18 NPT) 4x stainless steal clamps. 1/4' to 5/8' I.D. 2x 1/4' Barb Fittings straight- 1x 1/4' check valve- 2x 1/4' fuel hose( approximately 10 ft and 6 ft) Every item on listing is on the pictures. Please check it carefully. Items lightly used for checking my HHO system. I ship to 48 US States. no shipping to Alaska,Hawaii, Puerto Rico and the US Virgin Islands) no International shipping. Payment must be received within 48 hours of the close of the auction. Otherwise. I reserve the right to cancel the order and relist the item. Returns: I accept returns within 7 days. When returned. Item must be in the same condition as when shipped. Buyer pays shipping ... moreon returns. I will usually ship within 2 business day of receiving cleared payment. DELIVERY CONFIRMATION INCLUDED. IMMEDIATE PAYMENT REQUIRED.
|
|
|
250+ FREE ENERGY AND SUPPRESSED TECH BOOKS. HOW TO, DIRECTIONS, PATENTS & PLANS
250 EBOOKS AND PDF'S THIS IS AN INCREASE FROM THE LAST EBOOK COLLECTION OF 100 EBOOKS. THIS HAS 250 EBOOKS ON FREE ENERGY DON'T WAIT TILL THE END OF THE WORLD! THIS IS THE LARGEST FREE ENERGY EBOOK COLLECTION ON EBAY. IT HAS OVER 400 FREE ENERGY DEVICES, MAGNETIC TESLA COIL, ANTI GRAVITY SYSTEM GENERATORS, VEHICLES, MAGNETIC MOTORS AND HYDROGEN POWERED CARS. CONCEPTS. KNOWLEDGE, FORMULA'S AND DIAGRAMS THIS MEGA EBOOK COLLECTION WILL BE SENT TO YOU ON A DVD DISC THE BOOK CONTAINS LINKS TO HOW TO VIDEOS! YOU WILL HAVE OVER PAGES OF PICTURES, DOCUMENTS, DIAGRAMS, INSTRUCTIONS, PATENTS, STEP BY STEP GUIDES TAKE ADVANTAGE OF THE SUPPRESSED TECHNOLOGY INCLUDING: NIKOLAI TESLA COILS BOB NEAL MOTOR LEROY ROGERS MOTOR JAMES HARDYS WATER JET GENERATOR VIKTOR SCHAUBERGER MIKE BRADY'S PERENDEV MAGNET MOTOR THE MURILO LUCIANO GRAVITY CHAIN ... moreLAWRENCE TSEUNG'S GRAVITY IMPACT WHEEL DANIEL COOK'S INDUCTION LES BROWNS PYRAMIDS STANLEY MYER HYDROGEN/WATER POWERED CAR(DIRECTIONS. PATENTS, DIAGRAHMS, AND PICTURES) SIMPLE MOTORS, GENERATORS IMAGINE NEVER HAVING A POWER BILL EVER AGAIN. NO WAITING AT THE PUMP, AND HELPING YOUR ENVIRONMENT! WE SHIP WORLDWIDE! INTERNATIONAL BUYERS. ALLOW FOR 2 WEEKS FOR DELIVERY ALL BOOKS WILL BE ON A DVD DISK. TABLET. IPAD, NOOK, KINDLE FRIENDLY! CLICK THE LINK BELOW TO VIEW BOOK LIST AND VIDEOS AGEOFLUCIDITY.INFO 200 EBOOKS IN TOTAL 2447 PAGE Free Energy Book(15 Books in 1) 1) Magnet Power. 2)Moving Pulsed Systems. 3)Motionless Pulsed Systems. 4) Gravitational Pulsed Systems. 5) Energy-Tapping Pulsed Systems. 6) Battery-Charging Pulsed Systems. 7) Aerial Systems. 8) Fuel-less Motors. 9) Passive Systems. 10) Vehicles Systems. 11) Other Devices and Theories. 12) Electronics Tutorial. 13) Doubtful Devices. 14) Renewal Energy Devices. 15)The Present Situation. 50.000 Volt DCPower Supply. Gas electrical hydrogen generator. Magnetism. Alexandersson- Living Water- Viktor Schauberger and the Secrets of Natural Energy(1990) A-Long-Term-Survival-Guide-Scrounging-Metal-and-Survival-Blacksmi
|
|
|
HHO ELECTROLYTE RECOVERY TANK BUBBLER HYDROGEN CELL
HHO ELECTROLYTE RECOVERY TANK BUBBLER HYDROGEN CELL You Are Buying A Bubbler/Water Reservoir for HHO Cells. Come with a Plug in the Top for easy Refills. Side Glass View That Allow to see The Water Level and Conditions. Suitable for HHO Dry Cell or Wet Cell Water Reservoir, Bubbler or Water Holding Tank. This unit was constructed and tested but never installed in a vehicle. Shipp NOT available internationally or to Alaska or Hawaii, N.C. residents add 6.75%
|
|
|
HHO Hydrogen GENERATOR for Cars and Trucks
HHO Hydrogen GENERATOR for Cars and TrucksThe HHO Booster is an on-board electrolysis system that generates hydroxy gas at a rate of approx. 1 liter per minute. To go into the air intake, to improve mileage and decrease emissions. An HHO booster is a piece of equipment which increases the mpg performance of a car or motorcycle. It does this by using some current from the vehicle’s battery to break water into a mixture of hydrogen and oxygen gasses called“hydroxy” gas which is then added to the air which is being drawn into the engine. The hydroxy gas improves the quality of the fuel burn inside the engine, increases the engine power, cleans old carbon deposits off the inside of the engine, reduces the unwanted exhaust emissions and improves the mpg figures under all driving conditions. This unit was constructed and tested but never installed ... moreon any vehicle. NOTICE/WAIVER OF LIABILITY Caution: This is not a toy. If you make and use one of these, you do so entirely at your own risk. Neither the designer of the booster, the author of this document or the provider of the internet display are in any way liable should you suffer any loss or damage through your own actions. While it is believed to be entirely safe to make and use a booster of this design, provided that the safety instructions shown below are followed, it is stressed that the responsibility is yours and yours alone. We are not responsible for any damages that may be caused to you, anyone else or your vehicle engine, drive train, personal property, etc. by the purchase and use of any of these products/ parts used for the Hydrogen Generator as well as the information provided that we sell. We are not responsible for improper installation, use, maintenance or operation of these parts. We know, for a fact, when hooked up properly, they create Hydrogen Gas which is HIGHLY EXPLOSIVE. Caution MUST be used when handling this by product of water.ALWAYS use and/or install these in a well-ventilated area and NEVER near a flame. Gas travels and could ignite at an
|
|
|
hydrogen booster 9000 series
unit was removed from a salvage truck. It appears to be in good condition and useable.
|
|
|
HH2 Hydrogen Generator
Up for auction is a HH2 system. This was removed from a 96 Lexus LX 450 that the previous owner had installed. I removed it after purchasing the vehicle. I never tried to use it before removing so it is being sold for parts only. The reservoir tank that holds the water is broken. See pictures for more info. Shipping to address in continental US only. No waranty no return. Thanks for looking. Posted with
|
|
|
64 Cell Ballard Power Mark1012 ACS 2.88 kW PEM Hydrogen Fuel Cell Air Cooled
This is a 64 cell Ballard Power Mark1012 ACS 2.88 kW(2880 watt) open air cathode proton exchange membrane(PEM) fuel cell stack. This uses state of the art self humidifying membrane technology. This completely eliminates the need of an external air humidification system and significantly simplifies system integration. With no moving parts and high efficiency. This fuel cell produces clean DC power with a low thermal and acoustic signature. The same air that feeds the fuel cell also maintains the stack temperature(60C) eliminating a complicated liquid cooling subsystem. The air moves though the passageway in each cell of the fuel cell similar to an automotive radiator. This type of fuel cell is easy to integrate as it only needs a variable speed fan to supply air for the reaction and temperature control as well as a hydrogen supply system( ... more5 psig) with or without hydrogen recirculation. This a top of the line hydrogen fuel cell with good power density for use in a multitude of applications. Properly serviced and maintained this unit can provide over 10.000 hours of performance. Perfect for off grid power and battery charging, portable power, or a science/engineering project. This was used for demonstrations and is in very good condition. It was working when pulled out of service. Therefore. It is being sold as is. Does not include the test stand shown in the pictures. No controls or support systems are included. I have over 10 years of fuel cell experience and can assist you in your integration or build your project for you around this stack. I also specialize in hydrogen storage systems. Specifications Rated Power[kW] 2.88 kW Rated Current 65 Amps DC Voltage(open circuit) 54 VDC DC Voltage(full load) 45 VDC Mass(approximate) 32 lbs Stack core height 16" Stack core width 16” Stack core depth 4.5" Will ship world wide. Shipping costs and customs clearance is responsibility of the purchaser. Ships from 77845. Shipping outside of the United States will have higher shipping costs. Shipping will be calculated
|
|
|
Fuel Cell Technologies 100 cm2 Single Cell Hardware Fuel Cell
These Fuel Cell Technologies 100 cm2 Single Cell Hardware Fuel Cells are in real good condition and guaranteed to function 100% They came from a local lab that was upgrading equipment. Included in listing are 5 fuel cells without graphite blocks which will be sold for $1000 a piece. We can accept pay pal or your credit card. Please contact me with any questions. A Fuel Cell Hardware Assembly consists of a pair of Poco Graphite Blocks with a precision. Machined flow-pattern and a pair of gold-plated connectors fastened with aluminum end plates. Gas inputs and outputs are through Swagelok fittings. 100SCH 100 Sq. Centimeter Cell Hardware(No MEA Provided) Ref. Electrode not available $4600.00 RETAIL
|
|
|
Fuel Cell Technologies 50 cm2 Single Cell Hardware Fuel Cell
These Fuel Cell Technologies 50 cm2 Single Cell Hardware Fuel Cells are in real good condition and guaranteed to function 100% They came from a local lab that was upgrading equipment. As seen in group picture. Various components of hardware assembly are or are not provided(terminal wires, heater plug, etc) We can accept pay pal or your credit card. Please contact me with any questions. A Fuel Cell Hardware Assembly consists of a pair of Poco Graphite Blocks with a precision. Machined flow-pattern and a pair of gold-plated connectors fastened with aluminum end plates. Gas inputs and outputs are through Swagelok fittings. 50SCH, 50 Square Centimeter Cell Hardware(No MEA Provided) $3210.00 RETAIL,
|
|
|
HHO ELECTRONICS FLASH CHIP SAVE FUEL GAS MPG EFIE MAP AIR/FUEL RATIO MODULE
This is the same chip that is sold by HydroClubUsa here: This is flashed for a 1999 Plymouth Voyager mini van but can be easily re-flashed. I had this re-flashed once already(changed vehicles) and I think it cost me $15.00 for the re-flash. FAST AND FREE SHIPPING!
|
|
|
12 LPM Hydroxy/HHO Generator by Advance Tech Engineering
Meet the new cell design from Advance Tech Engineering! Incorporated in this new design is years of testing in collaboration with plating in the Semiconductor Industry. Our innovative designs alone show that we are leaders in the hydroxy industry. Buying our products is like investing in the future. With every purchase from us. We are able to move the future of energy closer. Our ultimate goal is to bring free/cheap energy to the world. This Cell uses and requires 220v and produces up to 15 LPM. ATE used this cell for testing and running vehicles on solely hydroxy. You can see this cell in action here: and here: To see more of our products please see our website at Our home page Advance Tech Engineering prides it's self on being the far most knowledgeable on all things hydroxy/hho. So if you have any questions at all, feel free to ask!
|
|
|
Water Electrolysis Units - hydrogen & HHO generator
Up for auction is a water electrolysis unit that was purchased as part of an estate auction. It is being sold as-is and all sales are final. From what we know about this unit. It was used strictly to convert water into hydrogen/HHO mixture. By the looks of it, it was used very little. It appears to be a very high quality unit and is of stainless steel construction. We do not have any data on it, but it appears to have been custom made. We filled the unit with water and applied 12 volts to it for testing. It appeared to be producing gas at that point. But no futher testing was done. Unit measures approx 12 inches high by 4.5 inches wide. Buyer pays actual S&H. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-142f9a10403-0x101-
|
|
|
Lincoln Composites Compressed 250 Bar 3600 psi Hydrogen Tank Cylinder Fuel Cell
This tank was briefly used in an experimental hydrogen fuel cell vehicle. The vehicle has been stored in a University basement since about late 2007-2008. The tank is in very good condition. This is a Type 4 tank rated for 250 Bar = 3600 psi. It measures 18” in diameter and 51” long including the valve on the end. This includes the mounting brackets shown in the pictures as well as a high pressure transducer. The tank is due for inspection and re-certification in 2015. If you require a larger or higher pressure Tank please contact me. I also have a 350 Bar 5000 psi Dynetek tank measuring 23.7” in diameter and about 42” long including the valve manifold. This is a Type 3 tank and can store approximately 4.26 kg of H2. This too was used briefly in a fuel cell prototype vehicle. The vehicle was also stored in a University basement since around ... more2007-2008. The tank is in very good condition with few cycles and is certified until 2019. It includes mounting brackets and a 350 Bar refueling nozzle. This auction is just for the one Lincoln Composites Hydrogen tank. Like I said. Knowing the history of the company that built the vehicles and where they have been in the last 6 or so years it has seen very few cycles. Let me know if you have any other questions. I have been designing. Building, and integrating hydrogen storage systems and hydrogen fuel cell systems in vehicles for over a decade. If you need assistance with integration or design please contact me. I can provide turnkey solutions for almost any platform. H2 tanks are notoriously difficult to purchase in small quantities. With my industry contacts, I can help source hydrogen tanks of various sizes for your project. Winner must make payment within 3 days. Please note there is no paypal or CC on this item due to it`s value. This will ship by freight and added to the final price unless you make your own shipping arrangements. When the auction is complete I will email the winning bidder an invoice with shipping costs. For cost estimations assume 275 lbs. Thanks for
|
|
|
Stuart Energy/ Hydrogenics HyStat-15 Hydrogen Generator
Price Reduced from $85k- Need to move Stuart Energy/ Hydrogenics Hydrogen Fuel System 15 Nm3/h on-site hydrogen generator For a continuous production of hydrogen and oxygen based on the principle of water electrolysis. As a default. The HySTAT consists of a Process Part. A Power Rack and a Control Panel along with a complete set of interconnecting cables. The core component of the electrolysis skid is the HySTATTM pressurized electrolysis cell stack. The cell stack consists of circular electrolysis cells. Each containing two electrodes and an alkaline inorganic ion-exchange membrane. Process Skid The H 2 and O 2 are generated when current is supplied to the cell stack. The gases are then directed to the gas separator. Which is a dual stainless steel pressure vessel, and then rinsed in the small pressure vessel located above the gas separator. ... moreAn ISO 20’ high cube container designed and modified to house the 15 Nm3/h hydrogen plant. SPECIFICATIONS- One full generation unit. Unit contains all components and hardware. Approximate weight: 12.000 lbs. Does not include external storage tanks. Model: IGEN 1000/15/10 H2 OUTPUT-Flow range: 6 to 15 Nm3/h-Purity(before HPS: Hydrogen Purification System) 99.9% H 2 O saturated) O 2-Cell Stack(s) quantity: 1 POWER REQUIREMENTS-Estimated power consumption@ full flow(after HPS) with utilities: 5.3 kWh/Nm3-Voltage: 3 X 400 VAC ± 10% 3 X 480 VAC ± 10% Standard in US option) Frequency: 50 Hz ± 3% 60 Hz ± 3% Standard in US and CA option) Ultima X-series gas monitors- Ultracool Superplus chiller unit-Feed Water Treatment System-HPS(Hydrogen Purification System) Make Offer- Price Negotiable" Payment: All payments must be made within 14 days. Arrangements can be made for payment methods. Shipping: Arrangements can be made for loading and shipping at the buyers expense. Contact Information: Any questions. Please contact by email kantnecc@muohio.edu
|
|
|
Packard Instruments Hydrogen Generator Unit Model A8200, tested and working well
Tested with DI water and guaranteed working. The dessicant pouch may benefit from a regeneration process: put in an oven at 200C for about an hour. Packed in double-wall box with closed cell foam padding. It will arrive in good condition. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-1432eb9a458-0xe7-
|
|
|
HHO 30 amp PWM pulse width modulator hyderogen generator PWM
Normal 0 MicrosoftInternetExplorer4 30 amp PWM from HYDROGENWATERPOWER.COM 30 AMP. 12V Multi Function HHO Pulse Width Modulator hardly used, purchased form hydrogenwaterfuel.com cost over 300.00. Works fine, had little use. As far as I know it’s 12 volts not sure of the max amp capability multi frequency. I don’t have the exact specs on it nor can I find one identical to get the specs, as the website for the company is not available last time I checked recently.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-14353e9f0dd-0xfa-
|
|
|
Hydrogen Assist kit for small auto engines - saves gas
Hydrogen kit for small engines up to 3.5 liters. Most of the kit is completely unused. Just a few parts were used for testing then cleaned. The kit includes the following: 1. HHO Dry Cell Generator 8 plate of 316L stainless steel 2. Reservoir Bubbler 3. Pulse-Width Modulator-PWM-30A. 4. EFIE. 5. LCD Display HHO Am meter- 30A. 6. Relay. 7. Toggle Switch 8. Relay Socket. 9. Fuse Holder with fuse. 10. Solenoid 11. Fuel Vaporizer. 12. Instructions for installation
|
|
|
Hydrogen/HHO mixing unit (carburetor?) for gas engines
Up for auction is a gaseous fuel mixture unit that was removed from an experimental internal combustion engine. This is a liquidation item that was part of an estate sale. And is being sold as-is. Liquidation items are NON-RETURNABLE for any reason, and all sales are final. This unit was apparently designed to mix hydrogen/oxygen with air to be burned inside a gasoline engine. But will probably work with propane, natural gas, and other gaseous fuels as well. It appears to bolt directly onto the engine, just as a regular carburetor would. The controls seem to move freely. Because we cannot test this item, it is being sold AS-IS, and for PARTS ONLY. Buyer pays S&H. Please email or call 508-923-9503 with any questions.
|
|
|
HHO PULSE EFIE DUAL O2 & MAP SENSOR ENHANCER
PWM HHO Hydrogen Generator. Dry Cell Used but working really good.
|
|
|
AquaPulser D1400 Gated Pulse Generator
This auction is for a used AquaPulser D1400 Gated Pulse Generator. I used this unit for testing with HHO generators several years ago and have not used it since. I do not have any manuals or other info on this unit. The unit does power on and work. Feel free to ask if you have any questions.
|
|
|
Ballard Power 4/12 KW PEM hydrogen fuel cell liquid cooled
This ballard power hydrogen fuel cell was part of a power backup system that was decommissioned in working order. Total time on the cell is just over 600 hours. Has been stored in a temperature controlled warehouse since removal. Rated at 4kw continuous power. But can be used for up to 12kw peak power. Depending on when/where this sells, shipment may call for'no freeze' handling. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-144103f5bc1-0xe3-
|
|
|
2014 -NineBot Personal RuboT - Buy Me Now -FREE POLARD NOW DD DOG
The Seway Father NineBot 2014 Is A Personal Robot Join ouer Comunity for Global Economy NEXT WEEK YOU HAVE IT Adam Huber Huber Heights International
|
|
|
4-Cell PEM Fuel Cell 60W Hydrogen-Air (no oxygen needed)
This large PEM fuel cell is a module that was made for use in a rack that housed multiple units so that hydrogen and cooling was shared. This module contains four separate fuel cells. I can find very little technical information on the individual modules but from searching on the internet it would appear that they are either 41W or 60W. You could probably call the company(Avista) to obtain the specifications but suffice to say they are rather large as this type of fuel cells go. These are hydrogen-air cells which means that they obtain the required oxygen from the air. Hydrogen-air cells can be run on oxygen for added efficiency but it is much easier to simply use air. The air that provides oxygen is also used to cool the cell and take away excess water vapour, the visible metal plate is covering the duct that channels air through the body ... moreand over the membrane, there are vents visible at either end of the module. To use the fuel cell you will need hydrogen gas. An easy gas to obtain by electrolysis or from any bottle supplier. You will also need some sort of air flow through the module, a blower fan would do nicely. As it is, each end of the module has two cells wired in series which will produce about 1.2-1.4 volts, all in series it will be about 2.6V which can be used directly or stepped up using a boost module to get higher voltages. Easy to disassemble and clean. If you want it as parts then the elements could even be re-purposed, there is a fair amount of platinum and other precious metals in there too. The case is very robust, there are many small springs that provide strong and even compression over the membranes. Dimensions are 43mm x 171mm x 267mm and weight is a little under 1.5kg. Shipping is from New Zealand. If you have a preferred shipping method then I will be happy to use that. NZpost charges about $45 for a package of this weight(1.5kg) to the US, UK, and Canada, and about $20 to Australia, these aren't guaranteed but I will endeavour to keep costs below that. NZ shipping is FREE! If you are
|
|
|
H-TEC Fuel Cell Solar Hydrogen System JuniorBasic Classroom Instruction Kit
H-TEC Fuel Cell Solar Hydrogen System PEMPower 1 Junior Classroom Instruction Kit This kit appears in good cosmetic condition. The photos show the actual items. I did not test this other than checking the meters and the stopwatch. One meter appears to be working. The other one and the stopwatch did not show any readings but may just need batteries. I do not know how to test it beyond that so I must sell it as is. I will accept a return if you are not satisfied but I cannot refund the shipping charges. Includes what is shown. US shipping only on this item. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Ovonics Metal Hydride Hydrogen Storage Cylinder 900 liter capacity
Ovonic Solid Hydrogen Storage canisters utilize proprietary metal hydride technology to safely store hydrogen in a compact manner at a low pressure. Up to 250psig. The metal alloy powder contained in the canister is formulated to absorb and release hydrogen similar to a sponge absorbing water. Canisters are designed to operate at ambient temperatures with no requirement for added heat and can store several times more hydrogen than similarly sized high-pressure compressed hydrogen cylinders. These canisters can be charged and discharged infinitely with no related memory problems that batteries incur unless contamination is introduced. Canisters may be re-generated fully if contaminated by moisture using a simple vacuum pump. These metal hydride storage cylinders were purchased for a pilot fuel cell project that was not funded for completion. ... moreover $950.00 usd orginal price. Current pricing is higher) These cylinders have been charged and discharged(fully and partially) as many as 10 times in a laboratory environment using dry. Fuel cell grade hydrogen. You are bidding on one(1) 900 liter(80 g) Aluminum pressure cylinder filled with Ovonic proprietary Metal Hydride storage medium with manual control valve. Pressure/temperature relief valve and 1/8" female NPT connection. Specification sheets and refill instructions will accompany each cylinder. These are fully functioning items. No Returns. Please ask questions before purchasing. See pictures for P-T curve and basic specifications. Shipped empty(no hydrogen) and sealed with 1/8" npt plug. Details The Solid Hydrogen Storage Canister(International) 900 SL uses Ovonics Standard"Air Shippable" DOT-SP13280-400 Alloy and provides a hydrogen storage capacity of 900 standard liters. The Ovonic Solid Hydrogen Storage canister includes a manual shut off valve and safety valves for over pressure and over temperature conditions. Technical Specifications Hydrogen Storage Capacity(nominal) 85g/ 900 Std. L(condition dependent) Diameter: 3.5in. 8.9cm Length: 16.
|
|
|
Avista ReliOn Hydrogen Fuel Cell Blade Module 150 Watt Output T-2000 L@@K!
This is for one Avista(Now ReliOn) Hydrogen Fuel Cell Blade Module with approximately 250 Watt Output and weighs 11 lbs. Great for science projects or to learn about fuel cell technology. This is used and was pulled from a working system. I have no way of testing the individual module. Sold As Is. Hydrogen enters and exits at the back two connections and air moves through the large opening. A series of fans should be sufficient to move the air. I have about 10 of these. I also have a complete 2000 watt system availablethat uses these hot swappable modules. See pictures for details. Let me know if you have any questions. Winner must make payment within 3 days. Thanks for looking. Check out my other auctions. I have a lot of fuel cell and hydrogen storage parts and systems. Let me know if you are looking for something.
|
|
|
2x HHO 6" 21 Plate Dry Cell Generator Kit
For bid is used HHO generator. 2x 6” 21 plate dry cell generator was used in my Chevy Tahoe. Recently I am building 5 times larger wet cell and therefore my recent kit has to go. I purchased it 1 year ago on Ebay. I spent over $900 for the kit. You can have it for fraction of the price. Kit is in good working condition ready to install. What you see in picture that is what you get. For details check: http:www.ebay.com/itm/Best-HHO-6-21-Plate-Dr y-Cell-Generator-Kit-331064839649?pt=LH_DefaultDomain_0&hash=item4d15008de1&vxp=mtr.
|
|
|
Jadoo N-Gen 100 Watt Hydrogen Fuel Cell Power Module Generator
This auction for a used Jadoo 100 Watt Hydrogen Fuel Cell. This shows signs of use but looks to functioning. I think the banged up appearance is from careless storage. When new this was rated for 100 watts and I was able to pull 50 watts from it. That's as far as my electric load would go. I can only say with confidence that this will produce 50 watt. See picture for voltage operating at 45 watts. I can not guarantee 100 watt output so please bid accordingly. This does not come with hydrogen storage. The winner will have to find a way to supply hydrogen to this system. Description from Jadoo: Jadoo’s N-gen is a fuel cell power unit that is both easy to use and reliable. The N-Stor refillable fuel canisters( not included) recharge the same the first time as the one hundredth. No memory as with traditional battery solutions. N-gen is capable ... moreof producing 100 watts of continuous power, perfect for recharging radios and cell phones in the field or powering surveillance equipment. The fuel cell system were originally developed to be battery replacements for in the field news cameras. See pictures for details. I have years of fuel cell experience so let me know if you have any questions or need assistance developing a system or solution. This is Sold As Is. Thanks for looking. Check out my other auctions for more fuel cells. If you are looking for something specific please let me know. I have a wide range of fuel cell parts. Stacks, and system available. Winner must make payment with in 3 days of the end of the auction.
|
|
|
Plug Power 48Vdc, 5k watt Hydrogen (PEM) fuel cell stack.
Up for sale is a Plug Power“GenCore” 48Vdc. 5000 watt Hydrogen(PEM) proton exchange membrane fuel cell stack. There is less than 6 hours of actual run time on this stack before it was decommissioned from working Gencore fuel cell unit. Stack was removed and stored in heated warehouse since removal. It has been sealed with the protector caps the entire time it has been stored. It has never been exposed to freezing temperatures since then. It will need to be rehydrated before its next use. I have coolant that I can send along. Or can hydrate prior to shipping if you plan to use asap. Coolant is propylene glycol and distilled water) This would be a perfect replacement for a Plug Power Gencore system that needs a stack. Or would make a great project for hobbyist. Could also be a replacement for an Ida-Tek or Ballard fuel cell system. Unfortunately ... moreI can’t keep this. Company is looking to recoup some of the costs. This is no longer made by Plug Power. However the replacement cost of the stack alone was $5800. I have all installation manuals/spec sheets. As well as extra Gencore parts/coolant that I can include in sale if requested. For a copy of manuals to look at. Email me at miscfuelman on gmail. Below are some specs that I know about this if you are looking to“play” with it. Specs: 46 to 56 volt operating range 5000 watt max continuous 0-109amp operating current range Actual hydrogen pressure into stack-1.2 to 1.8psig Maximum water emmisions-2 liters per hour@ full power load If looking for possible project with this(my knowledge) Top pipe on stack is for the coolant which houses a thermostat(just like a car. But opens at 120 degrees) There are two coolant pipes on bottom of stack. top one runs to a radiator just like a car to cool coolant when needed. One is the return to the stack, and the other goes to a coolant pump to keep stack from freezing when system isn’t running) Two AN connectors on back side are for the Hydrogen inlet. The second one is for the EGR blower(think car) which recirculates mixtur
|
|
|
HHO 40 Amp PWM With Internal fan
This is a 40 amp PWM made by Hydrogen Boost Now. I purchased it for a project and never finished it. The unit works fine. Directions come with it. I never had it in a car just hooked up on my test bench when testing my cell. I know this unit works. So if you hook it up backwards and fry it, It's on you, no returns. Happy bidding. Ships to lower 48 only
|
|
|
parts from HHO DRY CELL 316L 43 PLATES AU43 Compact Unit
It was used for 2 months. There is no original end plates but I added two pieces of plexi glass. Also. Barbs not included. No International Shipping!
|
|
|
Used HHO Hydrogen Dry Cell Generator with Extras!
I was cleaning my garage and found the HHO kit I use to use on one of my cars I nolonger have. This Kit was working and did raise my milage but depending on the vehicle you install it on you may need a controller. 1. The generator is a 9 plate 6" 1/8 gasket Best HHO dry cell generator. 2. Tank with 5 Ports 3. Amperage Gauge with 37.5 trip amp DC Circuit Breaker and 10ga wire 4. Relay and socket 5. all the used hose 6. 2 New O2 sensor extensions(I never got around to installing these) 7. 3/8 x 1/4 npt nylon hose barb for the intake 8. The instruction sheet I got with the generator. All Sold AS-IS Thanks.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-14596985e2d-0x103-
|
|
|
Brown Gas Hho Save Gas Fuel Cell
Used condition. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-145a07e6fb5-0x114-
|
|
|
HHO DRY CELL 316L 43 PLATES GENERATOR - - AU43 Compact Unit - for parts
Set was used 2 months. There are no barbs and no end plates- but I added 2 plexi glass. I ship to 48 US States. no shipping to Alaska, Hawaii, Puerto Rico and the US Virgin Islands) no International shipping. Payment must be received within 48 hours of the close of the auction. Otherwise. I reserve the right to cancel the order and relist the item. Returns: I accept returns within 7 days. When returned. Item must be in the same condition as when shipped. Buyer pays shipping on returns. I will usually ship within 2 business day of receiving cleared payment. DELIVERY CONFIRMATION INCLUDED. IMMEDIATE PAYMENT REQUIRED.
|
|
|
Used Super Pure Hydrogen Generator Kit Brown Gas Hho Save Gas Auto Fuel Cell
Used working great condition pull from working unit. I used in on my Madza 5 for 6 months and it did save me some money. What you see is what you get. I might send you the instruction if I can find it(consider I can't find it right now) I bought it from GreenSource 2 years ago for approx. $200 include the Pulse Width Generator. Basically connect the Red to 12V and black to negative. The 2 spades connect to the top of the fuel cell. I consider you do have some experience in connecting/ installing the fuel cell as i wasn't able to provide any technical support. Consider this kit as spare parts or junk. This kit includes: 1. H ydrogen generator reaction vessel with stainless outer(up to 4L engine) 2. Stainless Steel electrode pack 4. braided reinforced tubing(you might need longer) 5. Flashback arrestor 6. Fusible link(fuse and holder) ... more7. 16 gauge) red primary hook up wire(for 12 volts) 8. 16 gauge) black secondary hook up wire 9. 1 toggle switch 10. spade. Quick Disconnect” connectors for connecting to the toggle switch 11. Comes with PWM(Pulse Width Modulator) 12. Throw in 2 black rubber seals and one input connector for the fluid Comes with PWM(the circuit from the photos) If you require substantial HHO output. You need a PWM. PWMs control the current inside the generator, thus the HHO flow, and the temperature of the operation. Using PWM if: 1. You use KOH or NaOH as an electrolyte 2. You do not want to risk overheating the hydrogen generator 3. You live in a warm climate and/or require the generator to be working at higher flow rates. Ie. near their capacity. No warranties/ non return and ship in USA only.
|
|
|
Liberty Industries High Efficiency Electrolyzer / HHO Dry Cell Generator
This Hydrogen Generator works great. Comes with Wiring Diagrams and Instructions.
|
|
|
Hydrogen Fuel Cell: Plug Power 5kW Proton Exchange Membrane
Normal 0 false false false MicrosoftInternetExplorer4 This is a used Plug Power GenCore 5T PEM fuel cell system. You need to supply pure hydrogen. And it will deliver up to 5,000 W at 48VDC. I have the operations manual and specifications. But I do not have the ability to test and certify the condition. However. These were fully functional upon decommissioning a several years ago. I cannot verify the hours of runtime on the stacks. Stack was removed and stored in heated warehouse since being decommission several years ago. Tubing is sealed with the protector caps. This is a good educational or learning tool. Or could be a great hobby project. Please don’t expect this unit to be refurbished and run for many years. It is an older model and not fully supported. I can put you in contact with some community colleges and ogther experts with knowledge ... moreof this unit. the replacement stack price used to be $5.800) and the complete system new was over $30,000. The unit is 48VDC and 5.0kW maximum power. Fuel input is 75 slm of pure H2 supply at max power. The total weight is 500 lb. There is no inverter. Only 48VDC output, but you can add an inverter or batteries, and/or solar DC for a complete system. You could pick up locally(SE Michigan. North suburb of Detroit) and I have a fork truck here on site. Alternatively, I will palletize, and ship via freight truck at your cost. I have three units available for sale. If you desire spare parts or redundancy. Normal 0 false false false MicrosoftInternetExplorer4
|
|
|
EFIE Oxygen Sensor Fuel Saver, Map sensor Adjuster 3 Devices Total
I am selling all 3 devices in this listing: 1 The Protium Fuel saver Mass air flow sensor tuner has three knobs( I had this on a Dodge Dakota 5.9 that I sold) 2 Hydrogen single Oxy sensor adjuster( comes with instructions) one knob one switch( I had this on a Dodge Dakota 5.9 that I sold) 3 If My memory serves me. I believe its a Eagle Research EFie kit that was assembled but not tested.eagle-research.com/cms/store/fuel-savers/efie-device-kit The first two did operate when I removed them The last one has not been tested All Sold AS-IS
|
|
|
Used Plug Power Hydrogen Fuel Cell Graphite Bipolar EndPlate Build Electrolyzer
Used 1 Plug Power Hydrogen Fuel Cell Graphite Bipolar End Plate from a GenCore Fuel Cell Stack One side has a flow field and the other is blank. The active area is approximately 245 cm2. The plate has internal cooling channels. The cooling ports can be seen on the edge of the center manifold. Put a PEM membrane(MEA) between two of these and you have your own single cell fuel cell or electrolyzer. These have molded in rubber seals on both sides of the plates so you won't need an O-ring or gasket. Overall the plates are in good usable condition. They came out of operating fuel cells that were only in operation for six months for a test project then they were decommissioned. If you have any questions contact me. Check my other listings for more fuel cell parts. Stacks, and systems. Sold As-Is with NO Warranty Local pick up or can be shipped. ... moreBuyer pays actual shipping. Cash in Person or PayPal Payment must be made within 3 days or item will be relisted. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-1477f0a4bb3-0x10b-
|
|
|
Automotive hydrogen generator tank
This is a small hydrogen generation tank designed to fit underneath the hood of most automobiles. Everything is assembled. But installation will require some automotive knowledge. This tank has never been used. But I used one identical to it on my'93 Toyota pickup 4-cylinder gas engine. The hydrogen comes out of the top of the tank, and I hooked it into a vacuum line going into the intake. Its a fragile process to get everything set up right, but once it is, fuel efficiency and horsepower both increase. Some claim these devices can double efficiency, but I saw about a 5mpg increase, and about a 20HP increase. I urge you not to buy these components unless you are familiar with hydrogen devices.
|
|
|
Stan Meyer replicators kit hydrogen generation Water Fuel Cell HHO
Up For Sale: Stan Meyer Replicators kit: Phase Lock Loop driver circuit: This kit includes a replication of Stan Meyer's Phase lock loop driver circuit which includes the following circuits on a single circuit board: Cell Driver Circuit-Gated Pulse Frequency Generator circuit-Phase Lock Loop circuit-Resonant scanning circuit-Pulse indicator circuit-Variable Pulse Frequency Generator circuit The circuit board connects to the VIC and switches it on and off with a gated pulse train. The frequency is manually adjustable. But in auto it will sweep across a range of frequencies as it looks for resonance. When it finds the resonant frequency it locks onto it. As you can see from the pictures the circuit board is in complete working order. The circuit produces a gated pulse train in which the pulse frequency. Gate frequency, and gate duty cycle ... moreis adjustable using small trim pots on the circuit board. The circuit also comes with it's own ac adapter-power supply. The Circuit board was purchased from Globalkast.com VIC coils and Bobbins Included is one set of ferrite U cores. These cores are very fragile and have been repaired in several places where they cracked. see pictures) There are also 3 bobbin sets included in the kit(See pictures) Both the VIC and Circuit board are housed in a plastic project enclosure for protection. see pictures) What you'll need As you can see from the pictures the coils have been partially taken apart and modified. If you want to make an exact replication of Meyer's circuit you'll need some 29 or 30 awg wire to re wrap the coils You'll also need a HV ultrafast diode for the coil as well as a water cell. Although this circuit performs exactly as it should replicating Meyer is no easy task. This kit comes with no guarantees that you'll have a successful replication. If you are operating this you should have some electronics knowledge so you don't damage the circuit. Yourself or someone else, or property. By purchasing this kit you agree to assume all responsibilit
|
|
|
Plug Power GenCore 5T PEM Complete Hydrogen Fuel Cell System 5kW
Complete GenCore 5T Hydrogen Fuel Cell System- 5000 Watts This is a used Plug Power GenCore 5T PEM fuel cell system. You need to supply pure hydrogen. And it will deliver up to 5,000 W at 48VDC. I have the operations manual and specifications. These were fully functional upon decommissioning a several years ago but I cannot verify the hours of runtime on the stacks. The stack was removed and stored in heated warehouse since being decommission several years ago. Tubing is sealed with the protector caps. This is a good educational or learning tool. Or could be a great hobby project or used as backup power. The unit was made in 2004 and the complete system new was over $30,000. the replacement stack price alone is $5,800) The unit is 48VDC and 5.0kW maximum power. Fuel input is 75 slm of pure H2 supply at max power. The total weight is 500 lb. ... moreDue to the nature of the item. I am selling as-is and the item is located in Toronto, Ontario. If you want the item shipped, I can put the item on a pallet and ship internationally as well- but the cost will vary depending on location. Please contact me for proper shipping quote, but the item is quite heavy and large, so please keep that in mind
|
|
|
Denny Klein HHO Generator Aquygen 1500 (His PERSONAL unit) Collectors item
Famed producer of HHO units Denny Klein passed away last year and left very little behind but a legacy of stimulating the field of alternative energy. I knew him personally for years and we were completing a private label deal with him to produce our units for Kleangas when he passed away suddenly. He lived a larger than life kind of existence and never expected to die so he left no last will and his heirs suffered for it. Of the few things his son was left with is this HTA unit that Denny himself used for experiments and he would bubble the gas through his drinking water and would breathe it as well. I saw him many times in his back-shop with this unit"doing his thing" The unit for sale here is his personal unit and I promised his son that I would put it out there for sale so that he would have some funds to offset the costs of ... morehis father's passing. Included in the sale is the operators manual and the buyer will receive a personalized thank you. Note from Denny's son Greg Klein. This is primarily to help the family of this legendary man. Shipping is at buyers expense and via buyers specified method to be arranged post auction. This is a two man lift unit and extra charge will be added if crating is required. Basic handling charge of $80 is in any event. Item is for sale off-line also but if auction makes it to the final 24 Hrs it will be sold on EBay.
|
|
|
Solar powered high pressure alkaline electrolyser
This is a working low voltage 2 kw alkaline electrolyser system that has been field tested since 2005. Hydrogen production capacity is up to 15 standard cubic feet/hour and has made well over 30 Mwh of zero emission energy from various RE sources It creates 99.9% pure hydrogen at 2000 psi. Meets or exceeds ISO standards. It is directly coupled to the RE source and can be coupled to wind or PV system simultaneously. Will automatically switch from RE power to grid power. System includes 2-1.4 Kw of PV(12 VDC nominal) Package includes: All electrical and computer controls. Data logging program, Historical performance data Fail safe safety system, 80 Kwh of H2 storage, Hydrogen purification system. Some spare parts and 15 gallons of Potassium Hydroxide solution Set up and training are also included. This system comes with a money back guarantee. ... moreThis is a large and heavy system with multiple components so delivery costs will be determined by final destination
|
|
|
Parker Balston Hydrogen Generator 75-31 Mdl. 75-31NA Used
Parker Balston Hydrogen Generator 75-31 Mdl. 75-31NA Used Thank you for choosing us! If you have any questions. Please ask any questions through EBAY MESSAGES. Exactly what is pictured is included. If you have doubts about what is included. Please ask before purchasing and we will be happy to clarify. We strive for 100 percent satisfaction with every sale. If there is a problem of ANY kind with an item you purchase from us. Please contact us through Ebay and give us the chance to make it right. We use a numerical rating system. Please refer to the item's condition number and the explanation of each number below The Condition of the item in this listing is: 2 Item descriptions are defined as follows: 1. Means the item is new/unused. 2. Means the Item is fully working with a 14 day warranty. 3. Means the item has some working issue or damage. ... moreIf not explained above. Please ask or refer to pictures. This is being sold as-is. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Regardless of the origin of the equipment. Photographs provided in the listing, documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified, recommended for, or offered for sale for any specific use and seller is not liable for any injuries or damages associated with the equipment. It is the buyer’s responsibility to have this item professionally tested and certified by an authorized technician prior to use. We accept Paypal. Please contact us ONLY through EBAY MESSAGES with questions. We do our best to ensure the safety of your item. We have bubble wrap. Packing peanuts, and high quality corrugated cardboard boxes. We w
|
|
|
Quad Wideband EFIE Oxygen Sensor Control (HHO) (For Water 4 Gas)
Digital EFIE For Wide Band Oxygen Sensors Wide Band Quad EFIE For 6 and 8 cylinder engines that have wide band oxygen sensors. Vehicles that have wide band oxygen sensors. Only use them upstream of the catalytic converter. The downstream sensors will still be narrow band. This digital EFIE has 2 wide band and 2 narrow band EFIEs. It has one potentiometer that controls the 2 wide band and another pot for controlling the 2 narrow band. It will work with all types of wide band and AFR(Air/Fuel Ratio) sensors. It is the EFIE to choose for four and five wire oxygen sensors. Also note there is a variation of the 5-wire sensor that uses 6 wires. This device will work with these also. SLIGHTLY USED. I bought this off the"Hydrogen Generators USA" website. I used it a few weeks. It worked great, and then I upgraded so I no longer need it. ... moreIt was $99 brand new, so I'm sure you'll get it much cheaper buying it used from me. Happy Bidding.
|
|
|
HHO DRY Cell 44 PLATE
HHO 44 PLATE DRY CELL IS USED BUT IN VERY GOOD CONDITION. VERY LITTLE USE. This is a 44 plate Dry cel. the picture is of one identical but smaller. 44 Plates of 316L Stainless Steel Plates* Demensions: 12*6*6 inch* High temperature Cast Acrylic end Plates* Quad 1/4" 90 Degree Bronze Elbows with Hose Barbs* Neoprene Rubber Gaskets* Net Weight: 3kg* Our Dry Cell is expandable. Plate size is 4*4 inch* Plate's thickness: 1.2mm/18 Gauge* Production: 1LPM to 6LPM. Working at 10v to 30v. 3amp to 50amp. SHIPPING: YOUR ITEM WILL BE SHIPPED WITHIN 48 HOURS AFTER PAYMENT IS RECEIVED. YOU WILL RECEIVE AN EMAIL FROM US AFTER WE SHIPPED THE ITEM. WE WILL GIVE YOU THE TRACKING NUMBER SO YOU CAN FOLLOW YOUR ITEM VERY EASILY. PAYMENT: PAYPAL IS PREFERRED. PLEASE TRY TO MAKE THE PAYMENT WHEN YOU PURCHASED THE ITEM OR IN 48 HOURS. PLEASE MAKE THE PAYMENT ... moreSOON THAT YOUR ITEM CAN BE SHIPPED TO YOU AS SOON AS POSSIBLE. SERIOUS BIDDERS ONLY PLEASE. THANK YOU. Return Policy: If you are not completely satisfied with your product simply return it with all accessories. Original packaging and manuals in"like new" condition within 48 hours of receipt for a refund, minus postage and handling and a 7% restocking fee to cover eBay and associated fees. products, accessories, original packaging or manuals not returned in original condition or showing signs of use or abuse will be subject to a 20% restocking fee. Return postage is the responsibility of the Buyer. Please take a moment to read our"Terms and Conditions" before you bid or buy. Terms and Conditions: TERMS AND CONDITIONS PAYMENT We only accept PayPal. Most major credit cards are accepted through PayPal. NON PAYING BIDDERS m. Non-paying bidders will be reported to eBay. Payment is expected no later than 3 days after the close of the auction. SHIPPING Usually your order will be shipped in 24 to 72 hours.But in most cases, we ship them out in the same day it is received Monday thru Saturday. We do not combine shipping. TRACKING NUMBERS You will receive a tracki
|
|
|
Experimental Hydrogen Fuel cell unit made in Germany
800x600 Surrey. Council, Corporate Reports, Regular Council, 2012 14.00 Normal 0 false false false EN-CA X-NONE X-NONE Normal 0 false false false EN-CA X-NONE X-NONE Normal 0 false false false EN-CA X-NONE X-NONE Experimental Hydrogen Fuel cell unit. Normal 0 false false false EN-CA X-NONE X-NONE Normal 0 false false false EN-CA X-NONE X-NONE
|
|
|
sodium hydroxide, PAL-40S Digital Hand-held "Pocket" Refractometer
atago pocket pal 40-s sodium hydroxide digital meter great for measureing naoh in youre hydrogen generator works good
|
|
|
H2o Hydrogen Generator
This is a H2o hydrogen generator kit that I purchased to convert your automobile engine to run on water. These were popular years ago when the gas prices sky rocketed. I have never used it or tested it. It has new components such as the water bottle filter cartridge w/SS plates(generator) Amp meter gauge, a back flow check valve and the starter solenoid. There is also some SS fittings. Bid accordingly for parts or whatever. See the photos. What you see is what you will get. Low starting bid& shipping. Shipped to the lower 48 states only. NO International Bidders Please. All sales are final with NO returns. Good luck bidding!
|
|
|
Hydrogen Feul Cell Generator-Methane Reformer-Inverter PEM--Platinum Scrap
Plug Power SU1 hydrogen fuel cell generator plant. Has a large methane reformer section to convert natural gas to hydrogen. 5kw PEM fuel cell stack that outputs DC power, and a power inverter and battery bank to make AC power output. Tons of interesting goodies inside for the backyard inventor/scientist/experimenter. If nothing else there is about 20 kilograms of catalyst beads and also the PEM membranes that are full of platinum and rhodium. Govt surplus from research project. Has been in storage several years. Although it appears complete, due to the complex specialized nature of this type equipment it is impossible for me to test, therefore it is being sold as pictured in as-is condition for parts or repair. I may have access to several more of these units in time. Located near Fort Worth. TX Viewing welcome. Local pickup is encouraged. ... moreBecause of weight of this item it can only be shipped truck freight. If you want it shipped, you the buyer are 100% responsible for making and paying for your own shipping arrangements from zip code 76112. I can deliver up to 100 miles radius of 76112 for $2.mile. Shipping weight is near 2800 pounds Size is about 6' long 40"wide and 6' tall. USA bidders only!
|
|
|
HYDROGEN GENERATIOR
FOR SALE A USED PAIR OF HYDROGEN GENERATORS. THESE SELL FOR $58.00 A PIECE NEW. THEY ARE HYDROCLUB USA HHO DRY CELL HYDROGEN GENERATORS. I INSTALEED THE KIT ON MY DODGE TRUCK AND THEY WORKED GREAT BUT SOLD MY TRUCK TO GET A DIESEL TO PULL A LARGE BOAT. THESE ARE 9 PLATE STAINLESS STEEL GENERATORS. JUST ADD THE 12VDC POWER AND WATER AND WATCH THE HYDROGEN GAS COME OUT. THESE WILL INCREASE YOUR MILEAGE. JUST PLUMB THEM INTO YOUR INTAKE AND WATCH THE MPG GO UP. WILL NOT HURT YOUR CAR. GET 2 FOR LESS THAN THE PRICE OF ONE PLUS FREE SHIPPING.
|
|
|
Hydrogen Fuel Cell Generator-Methane Reformer-Inverter-PEM--Platinum Scrap
Plug Power SU1 hydrogen fuel cell electric generator plant. Has a large catalytic methane reformer section to convert natural gas to hydrogen. 5kw PEM fuel cell stack that outputs DC voltage, and a power inverter and battery bank to make AC power output for grid connection. Tons of interesting goodies inside for the backyard inventor/scientist/experimenter. If nothing else there is about 20 kilograms of catalyst beads and also the PEM membranes that are full of platinum and rhodium. Origional cost was approximately $100,000. Untested Government surplus from a research project. Has been in storage several years. Appears complete but due to the complex specialized nature of this type equipment it is impossible for me to test, therefore it is being sold as pictured in as-is condition for parts or repair. This doesn't mean its broken, just ... morethat I am not able to test functionality. I may have access to several more of these units in time. Located near Fort Worth. TX Viewing welcome. Local pickup is encouraged. Because of weight of this item it can only be shipped truck freight. If you want it shipped, you the buyer are 100% responsible for making and paying for your own shipping arrangements from zip code 76112. I can deliver up to 100 miles radius of 76112 for $2.mile. Shipping weight is near 2800 pounds Size is about 6' long 40"wide and 6' tall. USA bidders only!
|
|
|
Nickle Hydrogen Generator Electrodes, One Positive And One Negative Plate Only
These are electrodes taken out of operating hydrogen/oxygen generators. They are composed of a nickel mesh. They are better than stainless for use in electrolizers or HHO cells because they will not decay even with a strong concentrated electrolyte like KOH. I will sell these 2 ways as full 24 plate sets 12 positive 12 negative or as individual plates. This auction is for a set of 2 plates cut out of the set. The pictures are of a set that I cut some individual plates off for testing. I have another auction for full sets of plates. I have a couple dozen full sets so a bulk deal is also possible. Thanks Just add 5 or 6 pictures that show how these were used. The auction is for bear used electrodes. Thanks
|
|
|
Idroenergy Hydrogen Gas Generator 12,500 Liters/Hour w Purifier New 2003
Idroenergy Hydrogen Gas Generator 12.500 Liters/Hour w Purifier New 20031st Unit Make: Idroenergy, Make: DSST/19.0, Serial: 06A, MFG Year: 2003, Drawing: DTEI00, 480 Volt 3Ph, Minimum Temp: 20 Degrees Celsius, Maximum Temp: 80 Degrees Celsius 67 kW Hydrogen Production: 12.500 L/H, Oxygen Production: 6.250 L/H, Max Pressure: 8 Bar, Water Consumption: 10 L/H, Cooling Water Max: 30 Degrees Celsius, Environmental Temp: +5/+35 Degrees Celsius Internal Transformer 3200 Lbs, Purifier Unit Make: Idroenergy, Model: PF810, Serial: 053, MFG Year: 2003, Drawing: PFEF00, 230 Volt 3Ph, Minimum Temp: 10 Degrees Celsius, Maximum Temp: 80 Degrees Celsius, 1.3 Kw, Rigging Hauling& Skidding Not Included In Asset Sale Price, You will receive an invoice via email or Ebay for the full amount owed. Including shipping. Please do not pay until you have received ... morethe invoice. Items not paid within 10 days from the end of an auction will be relisted. Payments by check will be held up to 4 days until the check clears. We can ship by LTL. Partial or full, van or flatbed, double drop, or export container. Freight costs are to be quoted at the time of sale. All freight costs are to be paid by the buyer prior to pickup. Please contact a sales representative for a shipping quote. We ship within 5 business days of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs. ship via UPS ground. Freight may be booked with any carrier. But usually goes out on the best available. Extra shipping charges: Lift gate truck- Add $128 Residential Delivery- Add $80 If a rigger. A lift gate truck, or a residential delivery is necessary, please notify us prior to quoting shipping. If buyer chooses to use their own freight. Shipping account, and or carrier, they will be responsible for all scheduling, paperwork, claims, and any damages incurred in transit. Local pickup is always welcome. No handling fees apply on local pickup. Any item not picked up within 30 days from the end of an auction will be charged
|
|
|
EFIE WIDEBAND CONTROLER
This Wideband EFIE/AFR controller is in excellent like new condition. I am selling because I ordered this in error and am unable to return item to seller because I have exceeded the 30 day return policy. If you don't know what this is don't bid. If you want to know more about this unit and if it's right for your car. Search the web for D&N Automotive Engineering. No returns. No reserve. Happy bidding!
|
|
|
Electrolysis / Electrolyzer Cell for Hydrogen/Oxygen Generation
Up for auction is an electrolysis cell that was part of a liquidation lot. It uses low voltage DC power to split water into hydrogen and oxygen. This unit was tested with both a 12-volt and a 6-volt battery while under water. It appears to generate a good amount of hydrogen/oxygen gas. Using only a standard 12-volt battery. No further testing was performed, but it appears to be functioning correctly. No further information is available on this item. Because this a liquidation item. Is it being sold as-is and all sales are final. Buyer pays actual S&H.
|
|
|
Plug Power Hydrogen Fuel Cell System Cabinet Model Gencore 5 HSM
Plug Power Hydrogen Fuel Cell System Cabinet double sided Model Gencore 5 HSM To receive a freight quote please contact us with your destination zip code.
|
|
|
SPINNER 11 WVO CENTRIFUGE
SPINNER 11 CENTRIFUGE, USED BUT IN GREAT CONDITION. CHECK PICTURES. I BELIEVE IT IS A 2 GAL PER MIN. IT HAS BEEN A LONG TIME SINCE I BOUGHT IT. NEVER CONNECTED IT UP. AS I GOT A SUPPLY OF CHEAP FILTERED WVO[ $1.00 PER GAL. RAN THE TRUCK FOR 5 YEARS ON FILTERED WVO. HEAVY DUTY CONSTRUCTION. MADE IN ENGLAND. THEY ARE USED ON LARGE TRUCKS. THE BODY IS CAST ALUMINIMUM AND THE INSIDE PARTS ARE STEEL THE UNIT WEIGHS OVER 10 LBS. HAS HOLES IN THE BODY FOR MOUNTING. AND HAS SOME BRASS FITTINGS. SOLD THE INTERNATIONAL 4900 CREW CAB 4 YEARS AGO SO DO NOT NEED THIS ANY MORE. INTERNATIONAL BIDDERS EMAIL FOR SHIPPING CHARGES BEFORE BIDDING. ANY QUESTIONS. PLEASE EMAIL THIS POST. THANKS FOR LOOKING. Tony.
|
|
|
vormax vormaxx waste vegetable oil heater
Used Vormax waste veg oil heater spin on filter and cyclonic filter call demus 704-705-5660 other waste oil parts available.
|
|
|
Greasecar SV-200 3 port solenoid valve
Pulled out of project vehicle to sell. Worked great
|
|
|
PA Bio Diesel Ultimate Force WVO Centrifuge
Please Read Shipping Notes Below Prior To Bidding If your looking at this you probably already know what it is. This is used and in excellent working condition. And yes the heater is included. I have copied the specs for this below if for some reason you are not quite sure what they are. I have had this for one whole season. I am getting out of the WVO collection and cleaning process and no longer need it. There is nothing wrong with this Centrifuge, everything is in working order. Happy Bidding, I have 100 percent feedback so bid with confidence Shipping Notes: I will pack the centrifuge so that everything is thoroughly protected. The centrifuge will be shipped Insured with a signature required. I will include a thumb drive with video showing the centrifuge and the heater while its running as documentation of condition before shipping. It ... morewill include time and date so you know when it was done. I do not accept returns or offer refunds for any reason. If something happens to the centrifuge during shipping do not send it back. We will go through the shipping insurance process to mitigate the situation. You should be able to put your zip code in the shipping section to see what it should cost to have it sent to your location! I do not charge extra for shipping or handling. I only charge what is due by the shipping company. I don't like it when its done to me. So I wont do it to you. I have 100 percent positive feedback and have been an ebay member for 11 years. You should be able to put your zip code in the shipping section to see what it should cost to have it sent to your location! Click to enlarge Ultimate Force 120V with 1500 Watt Inline Heater Additional Specs: Flow Rate: 1-60 gallons/hour(3.79-227 liters/hour) The slower you run this style centrifuge( ours or our competition) The cleaner your oil will be. Unit Height: 20" Unit Diameter: 23" Housing Width: 15 1/4" Housing Depth: 5 1/2" Bowl Width: 9 1/2" Bowl Depth: 3" Oil Feed Fittings: 1/2" hose barb reduced to 1/4"
|
|
|
Hpower H CORE 500-2 Proton Exchange Membrane PEM 500W Hydrogen Fuel Cell 48V
RDR ELECTRONICS WILL ONLY SHIP TO U.S. ADDRESSES. FOREIGN BIDDERS WILL BE APPROVED TO BID ONLY AFTER PROVIDING A U.S. SHIPPING ADDRESS! Auction consisting of: 1- Hpower H CORE 500-2 Proton Exchange Membrane PEM 500W Hydrogen Fuel Cell Only what is listed above and/or shown in the pictures below are included in this auction. This auction is for an H Power Corp(now part of Plug Power Inc. model H Core 500-2 hydrogen fuel cell. This unit produces 48 volts nominal at just over 10 amps. We could find very little information on this unit and Plug Power does not seem to be able to help either. What we do know is that this unit is in an 8U 19" rack mount chassis(but also has feet for bench operation) Fuel is 99.95% hydrogen and air. By product is water(and some heat) This unit uses a proton exchange membrane(PEM) to generate the electricity. ... moreThat is about it. This would make a good unit for the fuel cell experimenter. As an operating manual does not seem to be available. Perhaps it could be used as a hydrogen and oxygen generator if used in reverse and power and water applied to the fuel cell(and a lot of re-plumbing done) Unit weighs about 55 pounds. Used item in good physical condition. We have no knowledge of the unit's operating condition. From the looks of it it was mounted in a rack. But may have never been used. Item is surplus from an aerospace manufacturer. This item is being sold as-is since we cannot test in any way. Check the shipping calculator for S/H cost to your ZIP code. Item will be insured for the bid amount. To view all of our current E-bay auctions click on our RDR-Electronics Items for Sale Page link below! Click on any image for a more detailed view. Click on any image for a more detailed view. Click on any image for a more detailed view. Click on any image for a more detailed view. Click on any image for a more detailed view. Click on any image for a more detailed view. Click on any image for a more detailed view. Click on any image for a more detailed view. Terms and Conditions
|
|
|
biodiesel Processor, 110 Gallons
Professionally built in Tennessee. Have processed aprox 1500 gal. Has separate 110 gal holding cone bottom tank/with stand. 3-way valves. Inline heater, no touch injectors/mixers, timers. commercial grade pumps, $900) 2- pro bag filters. Works excellent. Have a lot of accessories goes with. Sold my diesels. Costs me new $4200 5 yrs ago. Great Deal.
|
|
|
ALFA LAVAL MAPX 207S-29-60 SEPARATOR DESLUDGER CENTRIFUGE
WE WILL BUY YOUR EXCESS INVENTORY! ALFA LAVAL MAPX 207S-29-60 SEPARATOR DESLUDGER CENTRIFUGE*Please read the following very carefully before purchasing* Product details are as follows: Includes Electric Panel and Pump Item is in working condition but may need scheduled maintenance Payment Options We accept Paypal. Credit Cards or Bank Checks. Once payment has cleared your order will ship within 2-3 business days Please note we charge sales tax on orders sold in North Carolina. Shipping Free Local Pick up is available We will also quote to ship units as well Please note we charge sales tax on orders sold in North Carolina. Auction Sales Policy Your bid is a contract. Place a bid only if you are serious about buying the item. If you are the winning bidder. You enter into a legally binding contract to purchase the item. If payment is not received ... morewithin 3 days, the item may be offered to the next highest bidder or re-listed at our discretion. If an auction is not described as having a“Buy-it-Now” option then please do not contact us trying to end it early as we will not be able to cancel the auction due to eBay’s policies. We reserve the right to cancel bids and/or limit the quantity of bids on our products. Failure to read our terms and policies does not dismiss your responsibility. internal code*GB-9* Thank you and happy bidding! Not what you're looking for? You may be interested in our other listings on eBay. All Content © 2013Green River Trading Company Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
 |