1 Drive Impact Wrench 1 Impact Wrench 1 Inch Impact 1/2 Air Drill 16 Gauge Air Nailer 16 Gauge Stapler 3/4 Impact Wrench 90 Degree Drill 90 Drill Air Hose Reel 50 Air Impact Wrench 3 8 Air Nailers Air Needle Scaler Air Rivet Gun Air Rivet Tool Air Riveter Air Screwdriver Air Stapler Air Tool Accessory Kit Aircraft Gun Aircraft Rivets Aro Air Tools Aro Grinder Atlas Copco Air Tools Atlas Copco Drill Atlas Copco Pneumatic Bostitch Floor Nailer Bostitch Floor Stapler Bostitch Framing Bostitch Stapler Bucking Bar Cherry Max Chicago Pneumatic Gun Chicago Pneumatic Impact Wrench Chicago Pneumatic Rivet Clecos Coil Nailer Compression Riveter Crown Stapler Desoutter Dotco Air Tools Dotco Grinder Duo Fast Stapler Dynabrade Grinder Finish Stapler Floor Nailer Floor Stapler Flooring Nailer Flooring Stapler Frame Nailer Framing Air Nailers Framing Nailer Goodyear Air Hose Hardwood Floor Tools Hitachi Hitachi Framing Nailer Hitachi Nailer Huck 352 Huck Rivet Gun Impact Wrench 1 Inch Ingersoll Rand 1 Impact Ingersoll Rand Drill Ingersoll Rand Impact Wrench Inline Oiler Matco Impact Wrench Nail Gun Nails Nailer Nutrunner Palm Drill Palm Nailer Pneumatic Air Tools Pneumatic Chipping Hammer Pneumatic Drill Pneumatic Driver Pneumatic Grinder Pneumatic Rivet Gun Pneumatic Torque Wrench Pneumatic Wrench Pop Riveter Right Angle Die Grinder Rivet Bucking Bar Rivet Buster Rivet Set Rivet Set Tool Rivet Shaver Rivet Squeeze Rivet Squeezer Riveter Senco Senco Nailer Senco Pw Shear Wrench Siding Nailer Sioux Air Drill Sioux Air Tools Sioux Drill Sioux Grinder Sioux Tool Tool Uryu
 In 
 
Order by: 
Available to: 
Price: 
 - 
$
15.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
$
28.95
Buy It Now
$0 Shipping
Condition: New
Location: Kings Mountain,NC,USA
$
57.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
$
170
Buy It Now
$12 Shipping
Condition: New
Location: Boise,ID,USA
$
13.99
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
20
Buy It Now
Free Shipping
Condition: New
Location: Kansas City,MO,USA
$
13.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
$
10
Buy It Now
$3 Shipping
Condition: New – Open box
Location: Apple Valley,CA,USA
$
40
Buy It Now
$7.95 Shipping
Condition: Used
Location: Charlotte,NC,USA
$
37.99
3h 36m 38s
0 bids
$12.95 Shipping
Condition: Used
Location: Boaz,AL,USA
$
79.99
Buy It Now
$15.99 Shipping
Condition: For parts or not working
Location: Stratford,CT,USA
Huck HK-150A Manual Hydraulic Installation Tool Rivet Gun is used in good condition.It does have some wear from use. Comes in hard case with nose pieces. ... moreThe clasp on the case is broke. Item Condition All items listed in our eBay Store are used unless otherwise indicated in the item description. Shipping Information All items will be processed for shipping within two business days after payment has been verified. Items paid for Monday through Thursday will be shipped within two business days. Excluding holidays. Payments received after 2 pm Mountain Standard Time on Friday will be processed to be shipped on the following Monday or business day if there is a holiday. All purchases over $100 require a through Paypal before shipping. The process for confirming an address with PayPal can be found on the PayPal website by following this. Flat Rate Shipping covers either USPS Priority Mail. Parcel Post, Media Mail or Fed Ex Ground within the United States, as well as handling costs. If any other shipping service is desired, such as Next Day or 2 nd Day Shipping. Please contact us before your payment so we can adjust the shipping cost. Items purchased for over $150 and shipped with Fed Ex will be sent with a signature requirement in order to assure delivery. If this is an issue to a customer who cannot be home to sign for a package. Please contact us immediately after purchase, as we will ship the item within two business days. For items valued at over a certain amount, Fed Ex automatically requires a signature. Shipping Multiple Items All shipping costs are for the individual items in the listing. If you purchase multiple items to be delivered to the same address. Withhold payment in order to allow us to process a shipping discount on the invoice for these purchases. Payment We only accept payment through PayPal. Under no circumstances will we accept a credit card over the phone or any other method of direct payment. This is to ensure protection for both us and you. The buyer, should anything go wrong during the tran
$
185
Buy It Now
$15 Shipping
Condition: For parts or not working
Location: Yorktown,VA,USA
$
11.69
Buy It Now
$1.99 Shipping
Condition: New – Open box
Location: Petal,MS,USA
$
46.99
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Pittsburgh,PA,USA
$
36.95
Buy It Now
$0 Shipping
Condition: New
Location: Eastlake,OH,USA
$
13.98
Buy It Now
Free Shipping
Condition: Used
Location: Waterloo,IN,USA
$
345
Buy It Now
$0 Shipping
Condition: New
Location: Robesonia,PA,USA
$
59.99
1d 8h 28m 5s
0 bids
$15 Shipping
Condition: Used
Location: Redmond,OR,USA
$
18.95
Buy It Now
$0 Shipping
Condition: New
Location: Tucson,AZ,USA
$
14.13
Buy It Now
$8.8 Shipping
Condition: New
Location: Wayland,MI,USA
Coilhose Pneumatics ATL016 Air Tool Winter Grade Lubricant 16oz. Coilhose Pneumatics ATL016 Air Tool Winter Grade Lubricant 16oz. While many air tool ... morelubricants quit working below freezing temperatures. Coilhose ATLW provides lubrication down to-45F degrees. ATLW Anti-Freeze Lubricant can be applied via conventional air line lubricators or directly into the air tool's inlet port. Note: ATLW is not an additive and should not be mixed with other lubricants. This could result in a reduction of its de-icing and lubricating effectiveness as well as gumming of internal components. Welcome to FastoolNow on eBay! To make your purchase as simple and easy as possible. Please refer to the store policies listed below. Combined Shipping To save you some money. We offer combined shipping on multiple eBay purchases of different items made within a short period of time. FastoolNow will send you a combined invoice with a revised shipping total. Payment We accept the following forms of payment. PayPal Sales Tax For shipments to Michigan addresses. We are required by State law to collect 6% Sales Tax. Customer Service We accept returns up to 14 days after you receive your order. In order for us to be able to accept your return. Your items must be in good condition, and be in the original packaging. Please note that shipping charges are not refundable and a restock fee may apply to special orders. When you receive your shipment, please inspect the packaging carefully. Note any damage to the package with the driver at the time of delivery. Please provide up to 7-10 days for returns to be inspected once we receive it. Customer is responsible for return freight. Of course, customer satisfaction is always our goal- so don't hesitate to call us at 1-888-654-8898
$
70
Buy It Now
$15 Shipping
Condition: Used
Location: Port Orange,FL,USA
$
25
Buy It Now
Free Shipping
Condition: Used
Location: Rochester,NY,USA
$
28.95
Buy It Now
$0 Shipping
Condition: New
Location: Mesa,AZ,USA
$
35
Buy It Now
$4.5 Shipping
Condition: Used
Location: Lynnwood,WA,USA
$
152.96
Buy It Now
$0 Shipping
Condition: Used
Location: Appleton,WI,USA
$
46.54
Buy It Now
$29.99 Shipping
Condition: New
Location: China
$
15.95
4d 3h 33m 18s
0 bids
Free Shipping
Condition: Used
Location: Willow Street,PA,USA
$
850
Buy It Now
Free Shipping
Condition: Used
Location: Fort Calhoun,NE,USA
$
280
Buy It Now
Free Shipping
Condition: Used
Location: Saint Paul,MN,USA
$
13.99
Buy It Now
$0 Shipping
Condition: New
Location: Prospect,CT,USA
$
29.99
Buy It Now
$0 Shipping
Condition: New
Location: Romulus,MI,USA
$
39.99
Buy It Now
$0 Shipping
Condition: New
Location: Independence,MO,USA
$
39.95
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
45
Buy It Now
$8.95 Shipping
Condition: Used
Location: San Antonio,TX,USA
$
49.99
Buy It Now
$0 Shipping
Condition: New
Location: Banning,CA,USA
Description NEW 1/4" DR DRIVE AIR POWERED RATCHET IMPACT WRENCH POWER RIGHT ANGLE TOOL Specification Speed: 240 RPM, Air Pressure: 90 PSI, Maximum ... moreTorque: 20FT/LBS, Average Air Consumption: 3 CFM, Air Inlet 1/4" NPT, Hose Inlet: 3/8: I.D. Length: 190mm, Payment: We prefer You may pay instantly with PayPal by clicking the pay now button at the top. Return Policy: NO QUESTIONS ASKED! You may return the product within 30 days of receipt. Item must be returned in new condition. As received with all accompanied accessories and literature, including the factory carton. Shipping, handling is not refundable unless item is returned because of defect. If item is found defective return shipping will be refunded to the buyers paypal account once the item is verified defective. Buyer is responsible for return shipping costs and logistics for all returned items that are not defective. You must contact us within 30 days of receipt, to request an RMA number. Items received without an RMA number, will be refused and returned to the sender. Terms: Buyer assumes all risk of liability with respect to the purchase and use of the product/item. All of our pictures are photos of actual items. Colors or packaging of items delivered may vary from those photographed Payment is expected within 7 days of auction close. We cannot guarantee availability of product if we do not receive payment within 7 days. Shipping: Free shipping to the all of USA unless otherwise stated. Shipping discounts for multiple items will be done on a case by case basis for international buyers. WE SHIP FASTER and SAFER THAN MOST SELLERS JUST CHECK OUT OUR FEEDBACK! We stock all available items. And we ship from our warehouse. Most orders are shipped the same or next business day after payment received. We ship with Fedex ground or with the US Postal Service to physical addresses. Some items may be shipped to PO Boxes. Please inquire before bidding if po box is a must. Please inquire before bidding any shipping questions or quotes that are not shown on list
$
179.25
Buy It Now
$14.95 Shipping
Condition: Used
Location: Gresham,OR,USA
$
19.99
Buy It Now
$0 Shipping
Condition: New
Location: Staten Island,NY,USA
$
10.95
Buy It Now
$0 Shipping
Condition: New
Location: Eastlake,OH,USA
$
50
Buy It Now
$8.5 Shipping
Condition: Used
Location: Ashtabula,OH,USA
$
24.95
Buy It Now
$0 Shipping
Condition: New
Location: Eastlake,OH,USA
$
254.99
Buy It Now
$0 Shipping
Condition: Used
Location: Palmer,TX,USA
$
99.9
Buy It Now
$8 Shipping
Condition: New – Open box
Location: Mentor,OH,USA
$
249.99
Buy It Now
$8.99 Shipping
Condition: New – Open box
Location: Phoenix,AZ,USA
$
149
Buy It Now
$11.88 Shipping
Condition: Used
Location: San Antonio,TX,USA
$
29.99
Buy It Now
$0 Shipping
Condition: New
Location: Prospect,CT,USA
$
59.99
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Pittsburgh,PA,USA
$
190
Buy It Now
$13 Shipping
Condition: Used
Location: Saint Paul,MN,USA
Dotco Right Angle Grinder | 12L2252-01 | 11.000 RPM | 1/4" Collet hobby use only. 12-22 Series– 0.6 hp(0.45 kW) 200 Series Collet– Heavy Duty Head ... moreSpecifications: Oilless blades: yes•Exhaust: side•Free Speed: 11,000 RPM•Abrasives capacity: 3/4" carbide burr, 2" mounted wheel•Housing type: composite•Weight: 3.2lbs. Head height: 3.9" Length: 9.3" Collet size: 1/4" Air inlet size: 1/4" Made in USA
$
199.99
Buy It Now
$0 Shipping
Condition: Used
Location: Appleton,WI,USA
$
46.86
Buy It Now
$0 Shipping
Condition: New
Location: Escondido,CA,USA
$
17.5
Buy It Now
$8.99 Shipping
Condition: Used
Location: Post Falls,ID,USA
$
14.96
Buy It Now
$0 Shipping
Condition: New
Location: Escondido,CA,USA
$
24.99
Buy It Now
$0 Shipping
Condition: New
Location: Paramount,CA,USA
$
40
Buy It Now
$25 Shipping
Condition: New
Location: Holdrege,NE,USA
$
315
Buy It Now
$0 Shipping
Condition: Used
Location: Grand Prairie,TX,USA
$
6.99
Buy It Now
$9.99 Shipping
Condition: New
Location: Grand Forks,ND,USA
CPO Model PC0101. CPO Price: $11.98, Availability: In Stock, Premium-grade oils formulated with high-quality paraffin distillate stocks, Contains a carefully ... morebalanced rust and oxidation inhibitor with an effective antifoamant, Size, 8 Oz. 1/2 Pint) 8 oz. 1/2 Pint) Pneumatic Tool Oil- PC0101, This product comes with CPO's 30-Day Money Back Guarantee, For full warranty information. Please contact us at 800-714-0969* Warranty valid for US customers only, Orders outside the US are not protected by manufacturer warranty. All orders are still covered by CPO's 30-day Money Back Guarantee) Shipping and customs charges for non-US orders will be calculated when the item is added to cart, All corded products are designed to work with North American 110/120V outlets only. Products used in foreign outlets without proper use of a voltage adapter/converter will not be covered by CPO's return policy or 30-Day Money Back Guarantee, CPO's commitment to 100% customer satisfaction is backed by a 30-Day Money Back Guarantee! If you are unhappy with the condition of your product. Send it back unused and we will replace it with a different one. If you changed your mind or are unhappy with your purchase. Simply return it unused for a refund* CPO's 30-Day Money Back Guarantee is for the amount of the merchandise ordered and does not cover any additional expenses related to installation. Materials, etc. CPO will cover the cost of return shipping in the event that an incorrect or defective item was sent. FAST SHIPPING! Most orders ship within 1 business day via FedEx Ground shipping! Some items(typically heavy items) ship within 2-3 business days and may ship via a different carrier. Shipment tracking information will be emailed to buyer after purchase. CPO Outlets will ONLY ship to BILLING addresses or CONFIRMED PayPal addresses. FOR SECURITY REASONS.CPO Outlets DOES NOT SHIP TO P.O BOXES. CPO Outlets ONLY accepts payments via PayPal on our Ebay store. State laws require that sales tax be charged on all orders shipped
$
200
Buy It Now
$0 Shipping
Condition: Used
Location: White Sands Missile Range,NM,USA
$
19.99
Buy It Now
$3.5 Shipping
Condition: New – Open box
Location: San Antonio,TX,USA
$
84.99
2d 21h 25m 37s
0 bids
$0 Shipping
Condition: Used
Location: Oxford,MA,USA
$
30.99
Buy It Now
$0 Shipping
Condition: New
Location: Hebron,KY,USA
$
1,254.75
Buy It Now
$0 Shipping
Condition: New
Location: Huntington Beach,CA,USA
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
 In 

Past Items  
 
Gates EZ Align TM 7420 1000 Precision Laser V-Belt Pulley Alignment Tool Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Make: Gates EZ ALIGN Model: 7420-1000 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Condition: Good/Very Good- This item has been used very little. There is little to no wear on the outside and everything is working just as it should with no issues. This item will not have multiple marks scratches. Or scuffs to the exterior. Auction includes: 7420-1000 with case and manual Guarantee: 30 Day satisfaction guarantee 60326.1 1833 KM Order: 21516 We are only able to accept PayPal payments it's secure and offers the most protection to buyers and sellers alike. PayPal also gives you the flexibility to pay with your checking account. Debit, or credit cards. Payment is expected ... morewithin 8 days. Sales tax must be collected for all Texas. Tennessee, Illinois, Washington, Nevada, and Florida buyers. We are unable to accept orders from resellers. We can only ship to addresses in the contiguous US(48 states) This item will be shipped via UPS ground. Shipments will only be made to confirmed PayPal addresses. Our goal is to ship within 24 hours of PayPal receipt of payment. And we guarantee it will leave our store within 2 business days. Insurance and delivery confirmation is included for all items and is calculated into the shipping charge. Shipping time with UPS ground is generally 2-6 business days, we will email the tracking information when shipment is made. Expedited shipping is available for additional costs at the buyer's expense, so please email any special requests, and we'll try to get you a quote within 24 hours. We currently ship from multiple locations in the states of Texas, Tennessee, Illinois, Washington, Nevada, and Florida. We can sometimes combine shipping and reduce the rate if you win items from the same location. Please see the three to four digit store identifier at the bottom of the description, and email prior to auction end fo
BIDDING ON A USED RIDGID#376 37 DEGREE FLARING TOOL IN NICE USED CONDITION. SIZES 3.16,1/4,5/16,3/8,1/2, AND 5/8.
Auctioning this 1 1/2" id crank#VB624 ABOUT 9" LONG has IH LOGO STAMPED ON IT PLEASE EMAIL WITH ANY QUESTIONS
This is an authentic DrumDial precision drum tuning tool. Measures Timpanic Pressure. Not Tension Rod Torque) It features the"classic" analog dial indicator(vs. digital) Hey. No batteries needed! It has been used. However. It is in like new condition in the original box and has all of the instructions too. Professionals. Teachers, students, sound techs and studio techs have all benefited from the speed and ease of drum tuning with the DrumDial. Silent Operation. Tuning Accuracy, Ability to Repeatedly Tune to a Particular Pitch, Easily Tunes in Loud Surroundings, Compact& User Friendly! This auction is for the"lower-48" only. Sorry. No international bidders please. Payment by PayPal. Shipping will be via USPS. Any questions? Please e-mail me. P.S. Check out the other"stuff" that I have listed!
You are bidding for a Clausing lathe 10x24 precision tool room in excellent condition. It has a new Fuerda 3 jaw chuck. It is very accurate and also has a new lead screw. The bed way is in excellent condition. Practically no back lash. Model: 4902 Serial number: 403244 The lathe comes with lots of tools as listed below. I CHANGE THE ELECTRIC MOTOR TO 115 VOLTS SINGLE FACE 1HP. QUICK CHANGE TOOL POST W/ 8 TOOL HOLDER 9 DIFERENT TOOL W/ INSERT. INCLUDING A BORING TOOL DRILL CHUCK KEYLEES NEW LIVE CENTER DEAD CENTER ENCO TURRET TAILSTOCK STEADY REST 4 JAW CHUCK Technical Specifications: S/N: 40324 Operating voltage: 115. 1 phse, 60 cycle 1HP. Swing over bed: 10-1/8" Swing over cross slide: 5-1/2" Distance between centers: 24" Hole through spindle: 1-1/16" Spindle speeds: 52- 1700 RPM(12) Threads: 4- 224 TPI(54) Longitudinal ... morefeed range: 00065" 0367" 54) Cross feed range: 00016" 00917" 54) Spindle nose: 1-3/4" 8 Spindle centers: 2MT Motor: 1 HP Overall dimensions: 60" x 28-1/2" x 46" high Estimated weight: 800 lbs. I CAN WORK WITH YOU. FOR SHIPPING THE LATHE, IT IS IN MIAMI 33186. ONLY IN USA. I CAN PUT IN A PALLET IF YOU WANT FREE. CRATING EXTRA CHARGE. ANY QUESTION FEEL FREE TO CONTACT ME. THANK YOU. youtube.com/watch?v=4sNbs1UToq4(please copy and paste this link to see the video) has a new Cross Slide Feed Nut
UP FOR BID IS: LOT OF 23 VARIOUS TYPES OF FIRE SPRINKLER HEAD WRENCHES A COUPLE ARE OF THE SAME MODEL(PLEASE LOOK AT PICTURES) USED WRENCHES Posted with
Nice old vintage saw setting tool. Made in Sweden. Marked with# 1941. Has adjustments for both directions. Paypal paid shipments will be to your confirmed Paypal address ONLY. As Paypal requires. Shipping method is YOUR choice. When paying select whatever shipping time& cost method YOU will be satisfied with, if the shipping method you desire is not listed, just ask, we will use it if available. Shipping is charged at actual cost. No handling charge, plus we pack for free! So. Please, do not ask us for a shipping cost reduction, or ask us to cover the shipping. We normally try to ship early the next day after the auction ends, if you have your payment in by then, item will go out then. We LOVE combined shipping(less work to pack& less cost for you! So if you win more than one item just wait to pay until we have sent you an invoice ... morefor the total. Non-paying bidders reported after 5 days. Unless stated otherwise. NOTHING ELSE is included in this lot except for what is shown in the photo. Descriptions are to the best of my ability. BUT. Since I am not all that familiar with some items, please LOOK closely to make certain you will be satisfied with what you see, next EMAIL with all questions you have, THEN place your bid. Photos and description © 2013. Powered by The free listing tool. List your items fast and easy and manage your active items.
Spring looping tool. Found in garage- perfectly useable. shows some signs of wear. No impairment of function, see pictures- Item sells new on amazon for 99$ Most of our items are used. Some are new and some can not be tested. We will mention to what extent we were able test an item before putting it up for auction however there is ABSOLUTLY NO GUARANTEE that any item we are selling is in perfect working order thus we promise nothing other then prompt delivery of the item you have won. Payment is expected within 48 hours of the auction's ending time. We understand things happen. Ie. you're on vacation when the auction closes, internet goes down etc. So please e-mail us if you cannot pay within this time period and we will take note of your situation. However do not leave us hanging as you will be reported to e-bay if we do not hear ... morefrom you after 2 days. Non-paying bidders WILL be reported under all circumstances. Shipping policies. 1) We ship on Wednesdays most of the time. 2) We try to use UPS as our default shipper however on occasion we will ship with other carriers but only upon our own discretion. 3) No shipments to Hawaii and Alaska. No PO or APO boxes. If you violate this request we will report you to E-bay. We ship to the lower 48 states only, we do not under any circumstances ship out of the U.S. DO NOT Bid and then ask us to ship internationally, if you are an international buyer we are sure you can find another seller who has what you want. Please respect our wishes and understand that in order to re-coop our losses from ebay on such an auction we must report you. Bottom line if you are an international buyer, do not bid on our items. 4) We do charge a small handling fee for most item sold. The price is from $3- $10 + actual shipping cost and covers the cost of the box. Packing material, tape and time. Please do not complain to us or ask us to lower the price. The extra handling fee that we charge ensures proper packing and delivery of the item that you have purchased. We take pride in properly
Check out my! Offering to my eBay friends a tool that I have owned and loved for many years. About 40 years ago I purchased this while I worked at Mid-West Abrasive Co. I was utility man and one of my jobs was to get rid of the many 55 gallon drums we emptied daily. I took them home cut the tops off and punched a few holes in the lower side and a trash burning barrel was born. I would deliver them after work and some days made more money at this than I had in the sweat shop all day. It's all about working smart! I purchased this from Industrial Tool Supply in Owosso. MI and the price at the time was a whopping $189.95, it was a big price but worth it as it was so much faster and quieter than a hammer and chisel. I left that job in 1990 and the tool has just been in my tool box since then. The pictures don't do it justice but it still ... moreis in real great shape. Never been taken apart or needed work, and it still is as ready to go as the day I purchased it. Works like a boy scout can opener, use it anywhere. If it wont draw bids I will gladly keep it. I gladly leave feedback. Please if you have questions. Ask well before auction ends. Payment expected within 3 business days. If you would prefer. This item is also available for pick up at my 28365 location. Please contact me if you are considering this and I will see how I can be helpful. Thankyou. If buying multiple items I gladly combine shipping as practical. Just stay in contact with me so I know what your wishes are and I can send a revised invoice. I am most frequently the buyer and can relate to the importance of keeping shipping costs low. I package as economically as possible and in no way try to profit in excess of the carriers charges. Check out my!
THIS AUCTION IS FOR A RIDGID OOR PIPE RATCHET THREADING/ THREADER SET WITH 3 THREADER HEADS 3/8. 1/2 AND 3/4 INCH ALL CUTTING TEETH ARE IN GREAT SHAPE,AND COMES WITH A RIDGID PIPE CUTTER MODEL NO- 20, CUTS 5/8 TO 2 1/8 PIPE OR TUBE, ALL IN GOOD CONDITION, NICE,SEE PICTURES ITS A 7 DAY LISTING,USPS PRIORITY MAIL SHIPPING COST IS 14.00 USA,EMAIL FOR INTL. SHIPPING COST,PAYMENT IS DUE WITHIN 7 DAYS FROM END OF AUCTION,ANY PROBLEM PLEASE EMAIL THOUGH THIS AUCTION SITE.BEFORE LEAVING ANY FEED BACK,THANKS AND THANKS FOR LOOKING.
This is a vintage J Sklar Mfg. Co. cattle castration tool for emasculation of bulls. It is used with some light surface rust in spots. But overall in good working condition. Buyer prepays with Paypal. Buyer pays actual shipping charges based on 7 lbs shipping weight from Zip 64012. Please use provided calculator for shipping costs. Refunds will only be given it the offending item is returned in the same packing at the buyers expense.
Valenite V30M-E50-175 Milling Tool Holder Valenite V30M-E50-175 Milling Tool Holder Model: V30M-E50-175 30 NMTB Taper Accepts 1/2" shank tools Good Condition- used Validus Group catalog SKU# TL1391 Photograph shows Actual item for sale Everything we sell is in our warehouse Questions Call: 260-723-4946
VERY OLD. RIDGID 10" PIPE WRENCH. GOOD CONDITION FOR IT'S AGE. SODA CAN IS TO SHOW SIZE. QUALITY TOOL, MADE IN USA.
Used Weber Robin EH-12 Subaru 4.0 Jumping Jack Tamper*Rammer*Compactor Tool*NR* click to Enlarge click to Enlarge click to Enlarge Description: This is for PICKUP ONLY at R&R Industries Inc. 195 Rocus St, Springfield, MA 01104! This is for the pictured piece, which was in running condition when purchased from the previous owner, but we have not started it here. It has real good compression, so the Boss will guarantee that it will run. A nice price for the right application. THANKS FOR STOPPING TO LOOK! For questions/negotiations, call Bruce at 413-733-2118. What you see in the Pictures, is what is Included, so please don't'Assume' that there is a box, instructions, or other parts/pieces unless you see them! Payments other then Paypal must be approved PRIOR to bidding! Shipping: This is for PICKUP ONLY at R&R Industries ... moreInc. 195 Rocus St, Springfield, MA 01104! NO SHIPPING unless pre-arranged with Bruce at 413-733-2118, PRIOR to the End Of Auction! Payment: ATTN: Many of my Auctions contain items that I have no history on. Therefore Smoke/Odor Free cannot be guaranteed! Re: FEEDBACK-Feedback will be returned after the winner is satisfied& has already left it-Sorry, but this is how it must be! I am not able to accept Credit/Debit Cards directly! ALSO-Questions asked within the last 12 hours of an Auction may not be answered(Only have computer access Mondays, Tuesdays, Fridays) OFFERS ALWAYS CONSIDERED! inkfrog terapeak. I000000.
Stanley mortise marking gauge. Walnut& brass. Stamped: WMS. Stanley patent pending. Beautiful patina& condition. NO RESERVE. NO RETURN. 1) Please contact us before bidding if you have less than 20 feedbacks. Also unverified buyers' bids will not be honored. 2) Payment is expected within 7 days of the end of the auction otherwise we reserve the right to relist the item.3) Auctions are not stopped& we don't have"Buy it now" provisions. 4) We appreciate our loyal customers. We enjoy their trust& will always try very hard to deserve& keep it. 5)Please view our other items for sale at"mdantiquesinc" Should you have any questions regarding any of the items. Please ask them early in the auction as we are not always available on the final day of bidding.
I HAVE RECENTLY ACQUIRED A NICE COLLECTION OF INDIAN ARTIFACTS FROM AN ESTATE SALE. THIS TOOL IS LARGE AND IN CHARGE. 7+ INCHES LONG AND 1.5 INCHES WIDE. THE WEDGE LOOKS LIKE A PIECE OF CELERY. HOLLOW AND SMOOTH. IM UNCERTAIN OF WHAT THE TOOL WAS USED FOR BUT I WAS TOLD IT WAS A RARE TOOL TO FIND. STARTING AT $9.99 FOR YOUR BIDDING PLEASURE. I WILL BE LISTING SOME OTHER RELATED LOTS SOON. THANKS FOR LOOKING.
20MM BORE. 11-2-M)
Used Command Short BT40 3/4" end mill tool holder for CNC machine. i have more of these if needed) See my other listings for more BT 40 tooling Ship weight 2-3 pounds.
Used Short BT40 5/8" end mill tool holder for CNC machine. See my other listings for more BT 40 tooling Ship weight 3-4 pounds. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13f2bd2fc41-0x103-
Used Bison BT40 5/8" end mill tool holder for CNC machine. See my other listings for more BT 40 tooling Ship weight 3-4 pounds.
Clean Clean false false false false EN-US ZH-CN X-NONE ORICO 3559SUSJ3-BK Full Aluminum Tool Free 5- Bay Hard Drive HDD Enclosure(Without RIAD) Note: We try our best to test all the functions of the item. But there might be some other unidentified matters that we have overlooked. Item offers"AS-IS" Condition. Overall Condition· Used/Customer Returns Cosmetic Condition: Customer return item. Power on only.Will not full test. Please refer to the pictures for item details. We take pictures on the exact item you will get Testing Note: None Please make sure that you have read and agreed our terms and conditions below prior to placing any bids. Thanks Items Included: Manual Factory Box Power Cord- 1. All products carry a 14 Days Refund Policy. 2. Customer inquiries will be responded within 24 hours during business days. 3. Please ... morecontact us if you are not 100% satisfied; we want your transaction to be a positive. 5 star experience. 4. We only Accept PayPal Payments. 5. Local Pick-Up Available For All Items In Store. No Shipping and Handling Fee Applied. Local Pick Up Information: FredsFreshDeals 18045 Rowland St City Of Industry. CA 91748 2:00 PM– 5:00 PM PST Mon- Fri Please bring the following materials to pick up: 1) Driver's License 2) PayPal Invoice 3) Filled Out Merchandise Pick-up Form You may download the Pick-Up Form here: Form 1- IMPORTANT NOTE: We currently are not shipping to Hawaii. Alaska, or Puerto Rico. No International Shipping, No Shipping to PO Boxes or APO's- No Exceptions. Please carefully read through all of Fred's Fresh Deals Terms and Conditions. Make sure you understand all returns and exchange policies before placing your bid. By bidding on Fred's Fresh Deals auctions. You are agreeing to the Terms and Conditions listed below. It is your responsibility to read and underst
Here is a nice antique brass hydrant tool. It is marked Western Fire Equip Co on one side and Forester no 20910 on the other side. It is 5 3/4" in length and in good condition. This would be a great addition to any enthusiasts collection!
Very gently used Ideal Crimpmaster Coax Crimping tool Number 30-582 Die included Powered by The free listing tool. List your items fast and easy and manage your active items.
We ship to confirmed address only. No exceptions! Payment within 5 days of auction end· International buyers are responsible for shipping. Broker and custom fees· Signature is required for delivery· B uyers; we do not rent tools. Please be sure to purchase to own(there will be no return accepted unless DOA) Bid only if you accept these terms Huskie REC-3510 Battery operated hydraulic crimper. Tool is in excellent condition. Comes with case, charger, two batteries. Die tray and manual. Please see photo of actual item, what you see is what you get. Buyer to pay actual shipping, thank you for looking. The Huskie REC-3510 is the largest in our line of battery operated 12 ton compression tools. The jaw opening is 1.65" and will accept mid-span copper and aluminum sleeves and cables up to 750 MCM. When the sleeves are compressed ... morethey can be removed through the large jaw. This tool accepts all"U" type dies available on the market. A built-in. Preset 10,000 psi bypass cartridge will audibly kick out when the 12 ton pressure is achieved. Test dies accompanied with our PG-4 can confirm the output pressure when needed. The output pressure can be adjusted via a bypass port located at the top of the tool. This tool has the most universal range of all of our self-contained ROBO* tools. Portability and handling are easier because the REC-3510 system is self-contained and compact. There is no tool setup time or extra power source needed. Which makes splicing a breeze. And with one finger trigger operation, operation fatigue and muscle related strains are nearly eliminated. Safer work habits result from using these tools. Specifications Output 12 ton Weight 20 lbs. with battery Size 19"L x 3.5"W x 10.5"H Jaw opening 1.65" Range TYPE MATERIAL MINIMUM MAXIMUM Lugs& Splices Cu 750 MCM Crimping Estimates BP-70E Cu 500 MCM 50 Cu 750 MCM 35
Pico Crimping Tools 400B Crimpmaster Crimping Tool Pico Crimping Tools 400B Crimpmaster Crimping Tool This Pico Crimping Tools 400B Crimpmaster Crimping Tool is untested. Is in good physical condition and is being sold on an AS IS basis. Handling Charge: 9.95(included in shipping above) ESSSURPLUS is proud to have our 15.000+ repeat customer feedback for you to review. Thank you for looking. And Good Luck if you're bidding! Important: Auction winners have 7 days to complete the purchase of item(s) won. Feel free to contact our office for assistance in the completion of your transaction if you are having difficulty. The auction item will be relisted or sold after the 7 day window. Thank you for your assistance. Please Note: We DO NOT ship outside of the United States. However, Non-US buyers may have or find a US shipping address. Condition: ... moreUsed andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground I will ship to: United States[Weight] 20 lbs. Shipping and Handling: Electronic Surplus Services a pretty image. with Vendio Research. Vendio provides powerful selling automation for sellers of all sizes. Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
AMP CRIMPER 90180-1 CRIMPING TOOL Controlled ratchet cycle hand crimp tool is designed to crimp 22-16 AWG Faston Series.187 Receptacle 42452-2. The tool is completely functional. May be engraved lightly. Unit is in good physical condition. And appears to be in good working order. Comes as shown in photos WE VALUE OUR CUSTOMERS IF ANY DISCREPANCY WITH DESCRIPTION PLEASE INFORM US. FREE SHIPPING TO LOWER 48 STATES ONLY PLEASE NOTE: Unit MUST be removed from our facility within one week of end of auction. Sales Tax will apply to items sold to buyers who take delivery in California. We will send this unit via UPS. We do not charge handling fees; high bidder pays actual shipping charges. Item may be picked up from Northridge location. Be sure to check out my other listings on Ebay. Item will immediately be re-listed if payment is not received ... morewithin 5 working days. Please contact seller if for any reason payment cannot be made on time. Check out the photos provided. Thank you for looking and Good Luck! I)
AMP CRIMPER 294-126 ADJUSTABLE CRIMPING TOOL Adjustable wire sizes(see photo for sizes) Unit is in good physical condition. And appears to be in good working order. Comes as shown in photos WE VALUE OUR CUSTOMERS IF ANY DISCREPANCY WITH DESCRIPTION PLEASE INFORM US. FREE SHIPPING TO LOWER 48 STATES ONLY PLEASE NOTE: Unit MUST be removed from our facility within one week of end of auction. Sales Tax will apply to items sold to buyers who take delivery in California. We will send this unit via UPS. We do not charge handling fees; high bidder pays actual shipping charges. Item may be picked up from Northridge location. Be sure to check out my other listings on Ebay. Item will immediately be re-listed if payment is not received within 5 working days. Please contact seller if for any reason payment cannot be made on time. Check out the photos ... moreprovided. Thank you for looking and Good Luck!
T244896 CRIMPING TOOL by RAYTHEON COMPANY DBA RAYTHEON U.S.A. THIS TOOL IS ABOUT 4 3/4 INCHES LONG. HAS A VERY SMALL VERTICAL PIECE OF METAL INSIDE THE LARGE JAW AND INSIDE THE THIN JAW IS A TINY STUD(AS BEST I CAN DESCRIBE IT) OUTSIDE OF ONE HANDLE. ON THE CURVE, THE CURVE HAS BEEN GROUND FLAT FOR ABOUT 3/8 INCH LONG. ASSUME IT IS A OWNERS MARK. THE INSIDE ONE HANDLE IS EMBOSSED"T244896" THERE IS NO DEFECTS THAT I CAN SEE. THIS TOOL IS IN GREAT WORKING CONDITION. WE DO COMBINE SHIPPING. PAYMENTS ACCEPTED USING PAYPAL. INTERNATIONAL BUYERS PLEASE BE SURE THIS CAN BE IMPORTED INTO YOUR COUNTRY FROM THE U.S.A. BEFORE BIDDING. THANK YOU.
WarnerSales Warner See all my listings: WarnerSales BURNDY S-35 DIE FOR M10S-1 RATCHET HAND CRIMP CRIMPER CRIMPING TOOL Offered is USED Burndy Die Part# S-35. Description: For Burndy M10S-1 crimper This item is in good USED working condition. FREE SHIPPING TO THE LOWER 48 STATES Feel free to contact us with any questions you may have by scrolling to the bottom of the page and using the"ask a question" link. Please include the eBay item number in all of your communications. We will respond to you as soon as we can. Our office is not staffed to answer emails evenings and weekends. And your patience is appreciated. Payment: We accept PayPal only. Payment must be made within 5 days of purchase commitment. If payment is not received within five days. An unpaid item case will be filed with eBay in order to recover our listing fees. Sales ... moreTax: We are required to charge 6% sales tax for items sold to Iowa residents. Shipping: We provide free shipping to the U.S. lower 48 states ONLY. We ship ONLY to the confirmed address provided with Payment. Before you pay. Please check your PayPal address for accuracy. For Alaska/Hawaii/other U.S. territories and international orders. Buyer pays the additional shipping. Please email us through the"ask a question" link at the bottom of the page for shipping costs before bidding. All customs forms will be filled out accurately. International customers are responsible for all applicable import duties and fees. Local Pickup: Johnston. Iowa) Pickups are welcome. You may pay cash at that time. Please contact us to make arrangements. Return Policy: You may return an item(other than an “as is” item) within 14 days of delivery for a full refund of the purchase price following our receipt of the returned item in the same condition it was in when sold. We will pay return shipping costs if the reason for the return is an error on our part. Otherwise. The buyer is responsible for shipping costs. Please contact us bef
Inventory Number: 04130772579 Manufacturer: Description: BURNDY BAT35 BATOOL BATTERY HYDRAULIC CRIMPING TOOL. 360* ROTATION Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, CHARGER WORKS, BATTERIES MY NOT HOLD A CHARGE, POWERS ON OK, NOT TESTED FURTHER. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it ... moreremoved. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items a
This item retails for over $230 each before shipping. This tool is now obsolete so good luck getting it from distribution. Separate die insert shown in picture is not included. Data sheet is located at http:www.molex.com/pdm_docs/ats/638113600.pdf
Hollingsworth Tool H-7B FIT-F11G Window Butt Crimper Manufacture: Hollingsworth Description: Hollingsworth Tool H-7B FIT-F11G Window Butt Crimper Condition: Pre-Owned Warranty: 14 Day DOA warranty Sold as pictured Please feel free to contact us if you need more information Wesbell Technologies ships all domestic orders via UPS Ground. If you would like the order shipped on your account please send an e-mail after you purchase the item and we would be happy to adjust your invoice. Thank you for looking Customer Satisfaction Beyond the Call Wesbell Technologies 555 Lucy Garrett Road Roxboro. North Carolina 27574. USA 1-336-322-0600 Ext. 262 919-428-3080 Powered by The free listing tool. List your items fast and easy and manage your active items.
I have for sale an antique 12 gauge shotgun reloading roll crimper tool. Everything works fine. The handles are black wood and the rest of the reloading tool is cast iron. T here are no names or markings on this tool that I can find. Great condition for the age.
PRINTED 1562 IN FOLIO: A RENAISSANCE BIBLE SEARCH ENGINE AND DATA MINING TOOL SOME OF THE SMALLEST FONT OF THE 16th CENTURY The Book: RENAISSANCE TYPOGRAPHY] BIBLICAL CONCORDANCE] Jean Benoit; Guillaume Guillard] Concordantiae Novae vtriusque Testamenti: iuxta tropos et phrases. Locosque communes distinctae, cunctis sacrarum literarum studiosis vice comentarii profuturae, quales nemo hactenus est aggressus:Parisiis: Apud Gulielmum Guillard& Almaricum Warencore. 1562. Preface in French; text in Latin. Title vignette. Head-pieces; initials. In triple columns. Signatures: ã⁴ a-z⁶ A-2F⁶ 2G⁴(2G4 verso blank) FOLIO. 4] 534 leaves; 36 cm. Contemporary Calf over wooden boards, heavily worn, with blind-tooled pairs of winged-griffons and cherubs, front board partially detached, spine renewed in 19th century with covers partially renewed, ... morespine brittle, t.p. margin cut and short with unsympathetic inner margin strengthening, and exlibris stamp, last lvs. also tight into textblock with similar inner margin restrengthening, general toning and thumbing, wide-margined. An uncommon imprint. The above work is a rather remarkable Biblical concordance- an index that lists all the words in the Bible and each passage in which they can be found. Long before computers and Google. These erudite concordances were the Biblical search engines of the Renaissance, consulted by innumerable preachers and theologians while preparing sermons or writing treatises. Additionally. They served as a data-mining tool. For instance, the very absence of a word or the relative frequency of words in the Bible could yield insight into the Scriptures. Great renaissance scholars such as Estienne, sensing both a market and fulfilling a Christian duty, toiled away at their compilation and publication. Finally, such works are Renaissance typographical marvels; the fonts created for their publication are often the smallest known font size used in the Renaissance(necessitated by the economics of publication and the large amount of Bible'data'
JACOBS CHUCK NO. 6A 0-1/2" CAPACITY MT1 ARBOR CHUCK KEY INCLUDED MADE IN USA The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. Lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13f2be40059-0xf7-
Ceradex Tool holder in good used cond. Model SI-GIVR-20-21. Please note small wear groove near end of shaft. Measures approx. 8" long Buyer pays $5 shipping to lower 48. Paypal to confirmed/verified address only.
3/8" TOOL POST WRENCH- PLEASE SCROLL DOWN TO SEE PHOTOS- Original equipment tool post wrench in fair to good used condition. Overall length is approximately 4 inches. Has a 3/8" open end and a 3/8" square opening. Marked: SOUTH BEND LATHE and No. 253. Used condition(see photos below) Minor dings. Scuffs and scratches. A little visible wear on the edge of the square opening, the open end is fairly crisp. Very light dirt& stains. No rust. No owner's markings, no significant damage. Ready to use! Please check my other auctions for more good quality tools- I will combine packaging to conserve shipping costs. Careful packing and fast shipping in the U.S. for 1 dollar. International delivery at actual cost. NO RESERVE! I do not end auctions early. Most of my items are"used" Usually offered as-found. Some items are ... morefrom collections, some have been cleaned. No unhappy surprises here- I try to describe all significant damage. Flaws, previous owners markings, etc. You will not be overcharged for shipping. Whenever possible. Multiple purchases will be shipped together and you will only pay the shipping cost of one item. Items will be carefully packed and shipped quickly. If you do not like the item. You may return it(in the same condition as received) for a full refund. If returning due to a problem that I missed, I will pay for the return shipping. SATISFACTION GUARANTEED! Powered by The free listing tool. List your items fast and easy and manage your active items.
SquareTrade © AP6.0 Swing Rite II Golf Training Iron Aid Tool Welcome to CJ's Treasurechest. Owned and operated by a Christian Family that loves to spread his Good Word. All is possible with God" Luke 1:37 Check out my other items! Be sure to add me to your favorites Sign up for my email newsletters by adding my eBay Store to your Favorites list! You are buying a Swing Rite II Golf Training Iron Aid Tool. This item is in very good condition. The SwingRite golf swing trainer can be swung indoors. Or out. It's ideal for when there is no time to get out on the course or when the weather is bad. Since it can be used anywhere, at any moment, it provides a quick and easy way to reinforce muscle memory, a necessary aspect of improving and perfecting your golf swing. What you see in the details of the pictures is what is included ... morein this sale. If you think something is missing please ask before you purchase it. Our photos are of the exact merchandise you are buying. We never use stock photos. To clear up some confusion for our international customers. All electrical items operate on 110 volt, unless specifically stated otherwise. Please make sure your phone# is listed in case the UPS driver needs help finding you. All International buyers will need to ask for a price quote. Florida law requires that we collect 7% sales tax from any buyer who resides in the state of Florida. We now ship within 24 to 48 hours from the time we receive payment. We are also registered Trading Assistants through Ebay and are authorized to sell your items as consignment on Ebay. Just go to the help page and type in trading assistant and click on the trading assistant Directory and insert our name. BOYD, into the search. Trading Assistants on eBay are independent sellers. Not employees or contractors of eBay Inc. Consignment Merchandise We also sell a lot of merchandise for other peo
Up for sale is this old vintage Millers Falls Polishing Grinding Arbor ~ Dual Buffing Heads ~ No 120A. used. Used in an old Machine Shop in Detroit MI we often have more than 6 pictures with our listings. to see the 7th-12th picture. Please use the scroll bar to the right of the small pictures we have 12 vintage Industrial Machine Age Steampunk Pulleys on auction tonight. Take a look! Please. See the pictures for the condition of this item. You may find something in the pictures that we didn't mention in the description, as we sell mostly older items. We do our best to show the defects, but sometimes they are missed. If you have questions, please ask, we respond frequently to our emails. We have a lot of vintage military and old tools in our store(Buy it Now! Check our feedback comments! We want to give you five star service. Please give ... moreus 5 star feedback or contact us. Policies: 1. We combine shipping. If you are buying more than one item. Please wait for your invoice to pay. If shopping over more than one day, please drop us a note to let us know you are bidding on more items. We will send a new invoice each evening. We are professionals and each of our packages will be shipped with USPS(smaller ones) that have a delivery confirmation code. Check in your"My eBay" section to see when you package has been sent, we usually send the next day, but please give is 48 hours to send after payment has been made. 2. In order to protect our buyers as well as ourselves. We only ship to the address on the paypal transaction. Please do not ask us to ship to a different address. 3. Please do not ask us to change our auctions to do a buy it now. In order to be fair to all our clients. We do not do this. Please participate in our auction. 4. Please look below the photos in our auction to see if we have answered any buyer questions that may add to the description of the item. International Shipping Information: 1. Please ask for International Shipping Prices PRIOR to bidding and check in the auction to see if this
Ladies and Gentlemen. Up for your metal working pleasures, is my used vintage Richline Model 400 Hand Rivet Gun. This tool is in very good condition considering it's age. It comes with 3 mandrels, the instructions and a few pop rivets and washers. You will be receiving this hand operated riveter via USPS Priority Mail Legal Flat Rate Envelope, weighing 2 pounds 4 ounces. I like to ship daily. Pay before 11 AM Oregon time, and you can have it within 2-4 days within the USA, excluding Saturdays, Sundays and Holidays. International shipping will take longer depending on destination. Dear Fellow EBAYER. You may be wondering why eBay shipping charges are going higher and higher. As an eBay buyer, I want you to be aware that eBay has recently changed their fee structure for us sellers, to include an additional, 11% on shipping charges. As a ... moreconsequence, I have to charge a minimum of a $1 handling fee on everything I sell, to cover eBay's additional 11% Obviously, they should stay out of the shipping fees, but since they're the only game in town, there's not much else I can do about it. Of course it doesn't end there, afterward PayPal, takes a fee on the total eBay transaction to include final value fees, and now shipping charges. Combined, eBay and PayPal on average, take 20% of everything I sell, every month! Further, we sellers have to buy and store most all our shipping supplies like, paper, ink, glue, envelops, boxes, packing and tape. Finally, in order to keep shipping costs down, we have to expend our time and gasoline to drive to the shipping facilities. Once we get there, we have to stand in line, like everyone else, most of the time. So, there you have low-down on Ebay/PayPal Shipping costs! I hope you like the products I offer up, and check back with me from time to time. Sincerely, Greg
Vintage Pickaroon Logging Tool This auction is for a Vintage Pickaroon Logging Tool. It is in used condition showing wear consistent with age and purpose. Head is a little loose on the handle. I will remove handle if winning bidder request and adjust shipping. DISCLAIMER: We make every effort to depict and represent the items accurately. If you have questions after receiving an item. Please contact us immediately. We pride ourselves on providing excellent customer service and will make every effort to assure your satisfaction. Your satisfaction and positive feedback is our number one priority. Please ask questions BEFORE you bid. It is your responsibility to ask for the information if it is not in the description. All posted shipping costs are for the United States. International bidders will need to request a quote for the approximate shipping ... morecharges BEFORE the end of the auction. We will combine shipping on items unless to do so would cause damage to the items. PayPal is the preferred method of payment. Cashiers Checks will be accepted ONLY WITH PRIOR APPROVAL. Enter Text in Properties Inspector_gsrx_vers_486(GS 6.5.1(486) ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13f2bfd5fbf-0x107-
Vintage Oshkosh Cant Hook/Peavey Logging Tool This auction is for a Vintage Oshkosh Cant Hook/Peavey Logging Tool. It is in used condition showing wear consistent with age and purpose. Handle appears to be original and is in good shape. Overall length of tool is 58" I will remove handle if winning bidder requests and adjust shipping. DISCLAIMER: We make every effort to depict and represent the items accurately. If you have questions after receiving an item. Please contact us immediately. We pride ourselves on providing excellent customer service and will make every effort to assure your satisfaction. Your satisfaction and positive feedback is our number one priority. Please ask questions BEFORE you bid. It is your responsibility to ask for the information if it is not in the description. All posted shipping costs are for the United States. ... moreInternational bidders will need to request a quote for the approximate shipping charges BEFORE the end of the auction. We will combine shipping on items unless to do so would cause damage to the items. PayPal is the preferred method of payment. Cashiers Checks will be accepted ONLY WITH PRIOR APPROVAL. Enter Text in Properties Inspector_gsrx_vers_486(GS 6.5.1(486)
Description This metronome is from estate sale and I plugged it in and it works. The case is black bakelite probably from the 1940's or 50's. The base has an information sheet as shown in photos. It has a crack that runs down the back section of the case(see photo) Payment Payment is due within three(3) days of close of sale through Paypal. If you need additional time for payment please notify me of your situation and we can make arrangements when necessary. Shipping ATTENTION INTERNATIONAL BUYERS: I will ship to countries that allow restricted shipping of jewelry items and other valuables only through the postal service allowed for your area. Please check with me before you purchase and I will look at customs rules for your location to determine cost. If you select first class international shipping it will be at your own risk.uninsured ... moreagainst loss or damage. When permitted. Priority Mail shipments to countries ouside USA will be insured against loss or damage covering purchase price only. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up? do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. SHIPPING& HANDLING- should you win more than one of our auctions within a three day period. We will be pleased to combine shipping and handling upon notification that you are bidding on more than one item. INSURANCE will be added at my descretion to fragile items and shown in the"Shipping and Handling" fees. DOMESTIC AND INTERNATIONAL INSURED PARCELS- If your item is damaged in shipment and an insurance claim required. Your refund will be
On Consignment is this Ritchie Engineering Company Bloomington MN USA is this Yellow Jacket Refrigeration Service Tool.UPC No. 686800 and Part No. 69075 Full Range SuperEvac LCD Vacuum Gauge.used.Comes with adapter.Thanks!
UP FOR BID I HAVE A NICE BURRIS 4X PISTOL SCOPE. I PURCHASED THIS SCOPE AT AN ESTATE AUCTION. I BELIEVE IT MIGHT BE AN OLDER SCOPE. BUT IT IS IN NICE CONDITION. I DON'T EVEN SEE ANY RING MARKS ON THIS SCOPE. AS YOU USUALLY DO. SCOPE IS VERY CLEAR, AND HAS THE DUPLEX RETICLES. VERY NICE USED PISTOL SCOPE. PLEASE LOOK OVER ALL PICTURES. IF YOU HAVE ANY QUESTIONS. PLEASE CONTACT ME. THANKS FOR LOOKING AND HAVE A NICE DAY.
TapeTech TTEC High Capacity Drywall Flat Box Drywall Tool This is for a used TapeTech TTEC High Capacity Drywall Flat Box Drywall Tool. This has been used and shows it. This will need a good cleaning. One latch on the top is missing. Your payment is due within 4 days of end of auction Most items are shipped within 24-48 hours of payment. Sorry but we only ship in the United States. Tennessee residents are required to pay Sales Tax of 9.75% We Combine Shipping Costs when possible. Please contact us about cost for multiple items. We ship Monday- Friday. Closed weekends. We have a 100% product guarantee. Returns must be shipped back within 14 days of receiving item. We do not refund shipping charges. We have all serial numbers on file make sure the returns are the actual item sold. If you have any questions about us or our items please ask and ... morewe will get back with you as soon as possible. Many items we receive are still in factory seal packaging. However. Sometime the box may be damaged. We open most factory seal boxes to check the condition and contents. We welcome bids from anyone with an overseas Military Address. APO or FPO addresses) PAS704203189
GARY DRILLING* A RARE FIND* COAT JACKET EMBROIDERED EMBLEM ON FRONT* WHITE MARKS ARE NOT ON COAT. THEY ARE ON PRINTER GLASS WHICH IS SCRATCHED SIZE 52-54 RED CORDUROY ZIPPER WORKS PERFECTLY 2 CLICK BUTTON NECK SHOULDER STRAPS SOFT QUILTED POLY INNER 3 POCKETS NO TEARS RIPS OR STAINS VERY VERY COMFORTABLE EXCELLENT CONDITION
ROPER WHITNEY 541-2 90 DEGREE 9" HAND NOTCHER SHEET METAL FABRICATION TOOL CONDITION: GOOD USED CONDITION- THE REPLACEABLE NOTCHER BLADE HAS A COUPLE NICKS SHOWN IN PICTURE 3.BUT DOES NOT SEEM TO EFFECT THE CUTTING PERFORMANCE.SOME LIGHT RUST HERE AND THERE. NEEDS HANDLE GRIPS IF USED MUCH I THINK.DOESN'T APPEAR TO HAVE BEEN ABUSED- SELLING AS-IS AS SHOWN AND DESCRIBED. I ADDED PLENTY OF PICTURES FOR YOUR VIEWING SOME CATALOG INFORMATION: ROPER WHITNEY NO. 541-2 90 DEGREE PORTABLE HAND NOTCHER TOOL FOR FAST.ACCURATE 90 DEGREE NOTCHING. HOOK NOSE JAWS PERMIT NOTCHING TO THE EXACT DEPTH WITHOUT SLIPPAGE AND WITH MINIMUM EFFORT. SPRING-RETURN JAWS. NOTCHER HAS 1" DEPTH WITH BUILT-IN METAL STOP( CAPACITY MILD STEEL GUAGE: 20 GA) TOOL LENGTH: 9" ALWAYS HAPPY TO ANSWER ANY QUESTIONS PAYMENT by" PAYPAL ONLY" WITHIN 2 ... moreDAYS OF AUCTION ENDING! ALWAYS HAPPY TO COMBINE SHIPPING. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13f3e825701-0xfb-
Up for auction is a DREMEL VICE Adjustable position vice. Holds Dremel Tool. Its in very good Condition. Please see photos. Sold as is. SHIPPING: We ship with USPS. Or UPS within 4 day of cleared payment unless otherwise specified. If you would like to insure your item, please specify as such, otherwise all shipped items will be NOT be insured and shipping will be via USPS ground. UPS may be an alternative. Shipping is not included in the price of the item. Shipping quotes are for the lower 48 States. NO Items will be shipped to Hawaii. Alaska, or international. Insurance in NOT automatically included in the price of shipping. Please specify if you would like to have your item insured and we will calculate insurance for you. RETURNS: Returns will only be accepted if the item was not as described in the auction. Buyer must request a refund ... morewithin 48 hours of receipt. And return the item within five(5) days of receipt. Buyer is responsible for return shipping charges. We do our best to present accurate, detailed information about every item we sell. Description is as accurate as possible, see photos. All items are sold as is, where is with no warranty. By bidding the bidder is entering into a legally binding contract for purchase. Seller reserves the right to remove this ad at any time. Item is for sale on other site locations as well. If prospective bidder has negative feedback or a purchase rating of less than 5 purchases. Seller reserves the right to cancel any bid that is deemed not from a competent bidder. Winning bidder MUST make a payment via Pay Pal within 48 Hrs of winning bid on EBay. Or contact me if sending a different method of payment. We do not accept personal checks. Otherwise seller reserves the right to sell item by whatever means chosen unless purchaser makes other arrangements prior to the end of sale with seller. Item is being sold locally, We reserve the right to end the auction early. Please do not bid on an item unless you are willing to pay for it. k5n.RcmdId ViewItemDescV4,RlogId
HITACHI SEIKI KV45 LIVE TOOL HOLDER USES ER20 COLLETS Good used condition. As pictured. Payment due within seven days of purchase. Check. M/o, credit card, and PayPal accepted. $15.00 for USPS Priority Mail shipping with delivery confirmation. If you have any questions regarding this item. Please give us a call at 440-343-4419 and we will be happy to assist you. Thanks for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13f3ea4f07e-0xfe-
SECO/ EPB GRAFLEX 1/2" END MILL HOLDER PART NO. M5840 36050. 36MM CONNECTION Very good used condition. As pictured. Payment due within ten days after auction ends. Check or money order preferred. PayPal also accepted. Winning bidder to add $11.50 for USPS Priority Mail shipping. International shipping available(buyer pays actual shipping cost) Thanks for looking!
Johnson& Joh nson adverti zing piece. Logo bearing knife and multi-tool with eleven separate tool s: Sharp knife with 2 1/8" blade Sharp saw with 2 1/8" blade Unsharpened saw with 2 1/8" blade Can Opener Sharp Scissors Bo ttle ope ner Phillips screwdriver Unsharpen ed 1 1/2" knife blade Na il file with hooked end Canvas Threader? 1 1/2" long with hole and pointed end) Corkscrew Unpacked. The item weighs 4.2 ounces. The tool is 3 3/4" long and 3/4" X 3/4" in width. Economy shipping may not include tracking Please check out my eBay store: DEugley Sales http:stores.ebay.com/DEugleySales(copy& paste it) and see over 300 items I have listed. The categorization system( a work in progress) allows you easy. Fast and efficient shopping and remember that multiple purchases usually result in shipping discounts ... moreThanks for looking& Happy Shopping!
TIF 9010A SLIMLINE ELECTRONIC REFRIGERANT CHARGING SCALE AC TOOL. Shipping weight: 10lbs EXCELLENT WORKING CONDITION. ACTUAL PHOTO. WHAT YOU SEE IS WHAT YOU GET! NO PERSONAL MARKINGS/ ENGRAVINGS. Powered by The free listing tool. List your items fast and easy and manage your active items.
LISTING IS FOR A USED SANDVIK SINGLE EDGE FINE BORING TOOL EXTENSION SLIDE BRAND- SANDVIK PART# 391.38A-0-096-022A EXTENSION SLIDE BORING RANGE- 99.50mm to 164.50mm EXTENSION SLIDE ONLY ADAPTER BODY& BORING HEAD ARE NOT INCLUDED FOR USE WITH SANDVIK SINGLE EDGE FINE BORING TOOL SYSTEM CONDITION- VERY GOOD TO EXCELLENT USED LAST ONE! Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO ... more2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LI
Here is a"KEROTEST HERMETIC UNIT SERVICING IT" Made in"Pittsburg 22 Pa" It is marked(see photo#3) and I can barely make out enough of the lettering. Brass fittings are marked and in metal box. 2. 3, 4, 5, 6, 7, 9, 10. One piece is unmarked and the valve is unmarked also. Kit is probally not complete. Paper label lists many(21) type of Unit" with corresponding"body adapter" and"stem adapter" I do not know much about this type of item. I do not see any breaks. Damages, nor repairs. Some wear and aging. Nothing too serious, as would be expected on a used item of this age. See photos for cosmetic condition. It is in as found condition. Has been cleaned lightly, and will look even better with a proper cleaning. I combine ship as much as possible to save on postage. Click on"View sellers other items" ... moreabove for more tools and other unusual stuff. f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13f3eb08052-0x105-
You are bidding an a USED#915020 Gopher Pole telescopic cable installation tool is perfect for installing plenum cables in ceilings& tight spaces. Self contained. Non-conductive rigid fiber glass push-pull tool telescopes from 4 to 22 feet and is lightweight and easy to carry. Features: Ideally suited for pushing/pulling wire over long spans and acoustic ceiling tiles. It telescopes from 4 to 22 feet( to meters) in seconds and is easy to handle in tight spots. It features a malleable metal tip that allows for easy shaping of the hook. The metal hook will not break under normal use. The Gopher Pole is sturdy and lightweight with no loose parts and is constructed of durable non-conductive fiberglass. It features a positive-locking system that won't accidentally collapse. The diameter of the pole measures from to in( to cm) Weighs 4 ... morelbs( kg) What you see in picture is what you get! Tested!
Antique. Old, metal, cast iron, brass, Deming Co. Salem Ohio, Success, hand, water pump, tool, for parts or repair only. This item shows overall wear including scratches. Discoloration, unoriginal paint marks found, heavy surface rust found in areas, and heavy pitting found to the cast iron handle and foot rest; this item comes in functional condition, however, water leaks from the seal at the top of the bulb. This item measures approximately 3” x 5.25” x 28.5” at its largest dimensions. And this item is sold for parts or repair only. Please see pictures for more details. Normal 0 false false false EN-US X-NONE X-NONE On Jun-13-13 at 01:04:14 PDT. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
You are viewing a vintage 1950's or so galvanized tin garden tote tool carrier. Etc. This appears to be a handmade piece and is painted blue. It measures approximately 17" long by 2 1/2" deep by 9 1/4" wide and 5 1/2" tall to top of the handle. It is in good and study vintage condition and has many uses. My pictures are true and accurate depictions of what this actually looks like and should be viewed and considered as part of my description. As is. Payment to be received within 3 days of auction end. US shipping only. I do not ship on Saturdays. Items ship within 3 days, or sooner, of cleared payment received and I'll keep you posted. Shipping cost on this item will be between 9.00 and 15.00 depending on your location. Need an exact quote before you bid, email me your zip code. Please wait for invoice before making ... morepayment as the Ebay calculator is not always correct; thanks. All sales are final, however, I strive for 5 star feedback, so should you have an issue with your item, please contact me as I will try and resolve. Any questions, please ask. Thanks and Bid with Confidence! SEE MY OTHER LISTINGS 252-491-2464
Up for sale is this vintage pruning shears no makers mark still has some red paint safety clip on end of handle replaced with wire but it works
2 ANTIQUE TINE CULIVATORS
THANK YOU FOR YOUR INTEREST IN MY AUCTION! THIS AUCTION IS FOR SOME KIND OF PRECISION GROUND BLOCK SET Block 6 3/8" W x 4 5/8" L x 1 1/2" H PRECISION GROUND BLUED STEEL USED IN THE AIRCRAFT INDUSTRY PREVIOUS OWNER WORKED FOR CURTISS WRIGHT& BELL AIRCRAFT I believe this is some kind of sine block or plate. It is machined with high precision and usually hardened to prevent excessive wear. This auction is for a Precision Ground Engineer/ Machinist block. It measures about 6 3/8" X 4 5/8" X 1 1/2" and weighs a whopping 8 lb. 1 1.6 oz. That is why I am shipping this in a Priority Flat Rate Box(USA) Condition: This precision piece is gently used with little sign of wear. No apparent damage. There is some ID etchings, but that should be no problem for a professional machinst. The original owner of these and other ... morequality machinist tools to be listed worked for Curtiss Wright Aircraft and Bell Aeronautics here in the Buffalo. NY area for over 40 years. He passed away earlier last year and his wife has asked me to liquidate his tools for her. She is currently living on Social Security. I am glad to be of assistance to her. If you are working in the trade. Need some excellent precision tools at affordable prices or just collect these things, whatever.you might want to place me in your"FAVORITES" list for the next few months to keep track of these auctions. I have just begun to open up the huge tool collection of a professional aviation machinist. Many of these tools are top rated names like STARRETT, LUFKIN and others. I will be listing similar new items weekly in the coming months. Now.if YOU have any other information or data on this piece and would like to share it. I'd be more than willing to pass it on to any possible NEW OWNER. Please feel free to contact me. That's about all I can tell you about this UNIQUE MACHINIST. TOOLMAKER collectible. If you collect MACHINIST TOOLS. WORK IN THE TRADE or just want a GREAT DEAL ON A BLOCK SET for YOURSELF. You could add this un
Antique Hand made Corkscrew. Measures 4 3/4" h x 3 1/4" wide for handle, hand turned wood handle, primitive twist style. This is one of many I am currently offering, check them all out, I do combine shipping fees.
WILSON TOOL SO:404720-10/ +0.006 LOC LOFT 5-3 WARD
BIRKESTRAND PIPE FITTING TOOL BIRKESTRAND PIPE FITTING TOOL I DO NOT KNOW MUCH ABOUT THIS TOOL SO PLEASE LOOK AT ALL OF THE PICTURES SO YOU CAN SEE THE CONDITION AND WHAT IS INCLUDED ON THE TOOL. THE DRILL WORKS AND THE CUTTERS SPINS ON THE TOOL.
German Shovel Blade has cross type markers mark. No other makers markings. Wood handle has original owners initials engraved. With correct unmarked leather cover. Straight and tight. L eather is supple. TERMS: No Reserve Auction- No“Buy It Now” All forms of payment are accepted and shipping can be combined on multiple items. If you don't have a PayPal account. Other credit cards may be used via the eBay'Pay Now' button, which will automatically direct you to a secure credit card checkout. If foreign shipping is offered. The foreign shipping fee will be listed and this shipping fee is NOT negotiable and do not ask us to falsify customs forms. International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with ... moreyour country's customs office to determine what these additional costs will be prior to bidding/buying. If payment is by Paypal. Items are shipped to your Paypal address, otherwise to your eBay address, please make sure your address is correct. If you request delivery to an address that is different than your confirmed address. We will assume no responsibility. Payment details are emailed to high bidder shortly after auction end and payment is expected within 7 days. All items are mailed via US Post Office. Buyer pick-ups are not available. Do not ask for a“buy it now” on auction items and also we will not end auctions early for a emailed offer. Items are described as accurately and honestly as possible and photos are of actual item at auction. Returns will be accepted only if the item is materially different from that described in the auction listing. Buyer must contact us within 3 days of receiving the item and buyer is responsible for return shipping charges. We include all the information we have about this item and if it’s not shown in the photos. Then it’s not included. Please do not assume that we are experts on this item simply because we have it at auction. If yo
ARTS& CRAFTS WHITE METAL SCALE.APOTHECARY. MEASURES 5 3/4" TALL.RESTING) BY 13" LONG MARKED BTS GDG. VERY GOOD WORKING CONDITION FOR YOUR COLLECTION OR GIFT* FEEL FREE TO ASK QUESTIONS OR REQUEST PICTURES AND IF SHIPPING IS LESS WILL REFUND DIFFERENCE. I WILL SHIP INTERNATIONAL.BUT HAVING HAD SOME ISSUES EITHER PRIORITY INSURED.OR FIRST CLASS WITH CONFIRMATION.BUT I WILL NOT BE HELD RESPONSIBLE IF LOST* I HAVE TO ASK THAT YOU CONTACT ME BEFORE LEAVING NEGATIVE OR NEUTRAL FEEDBACK SO I HAVE A CHANCE TO RESOLVE A PROBLEM YOU MAY HAVE.I STRIVE FOR 100% CUSTOMER SATISFACTION. I GIVE DISCOUNTS ON MULTIPLE PURCHASES IF YOU NEED MORE TIME TO FINISH SHOPPING WITH ME PLEASE LET ME KNOW. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. On Feb-24-12 at ... more15:50:16 PST. Seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back
Abu 7000/6500 tool kit with oil
Being sold at auction- GE Forge Easy Crease Nail Pullers- 12" size. These are being sold by the original owner who has retired from farrier work and artist blacksmith tinkering(not a reseller) GE Forge is known for quality tools in the industry. The jaws are designed to lock over the nail head and along its taper easily remove a single nail from a creased. Swedged or fullered shoe. Seller is downsizing tool collection and antique tools. This tool was well maintained as it was something essential to former work. Email with questions or if more photos are requested. Buyer feedback is important- I strive to meet or exceed buyer expectations. NOTE.THESE CREASE NAIL PULLERS HAVE BEEN MODIFIED TO FIT NARROW HORSESHOE CREASES.
Offering at auction. A pair of Knipex 99-280 horse shoe nail cutters; this tool is used by farriers and blacksmiths. It is made in Germany and is 11" long with a 1" cutting face. These represent quality that is not very available today. They are being sold by the original owner(a former farrier, artist blacksmith) that can attest to the best nail cutter he has used. They are used and also well maintained as most tools are that are critical to one's livelihood. They weigh 15.7 oz. Email with questions or if you want more photos. Seller is downsizing tool collection and antique tools(not a reseller) Buyer feedback is important- check out mine- I continue to strive to meet and exceed buyer expectations!
Antique 1900 cast iron leather rivet hand tool.contrary to item specifics this is NOT in mint condition as you can see.feel free to message me with any questions or concerns. Good luck bidding Posted with
QEST PEX 3/4" CRIMPING TOOL FULL SIZE USED VER LITTLE LIKE NEW CONDITION.
used strapping tool-tensioner swiss made fmc psts 476 very good cond Posted with free strapcutter new only surface rust free $60.00 vaule just cutter bander Posted with you cant buy 1 for that price
Up for auction is a DMC Daniels AF8 M22520/1-01 Crimping Tool in Excellent Working Used Condition with TH1A M22520/1-02 Turret Head Assembly. There are a few numbers engraved on one side. Good Luck Bidding!
THANK YOU FOR VISITING MONEY MARKET PAWNSHOP ON e-Bay.com We are licensed pawn shop located in Portland Oregon. Leica Disto Lite 5 Laser Measuring Tool It's in excellent working condition. Velcro on the case is not sticky. Please look at pictures carefully and ask all questions before buying. We accept Paypal as payment. ALL ITEMS MUST BE PAID FOR WITHIN 10 BUSINESS DAYS FROM THE DATE OF THE AUCTION CLOSE. Items will be relisted with negative feedback posted if further contact is not made within that time frame. Email/SPAM blocks are the responsibility of the winner. If you've won and have not received a congratulations email then you need to contact us immediately. Expedited shipping is an additional option if you like. SHIPPING TO ALASKA AND HAWAII MIGHT BE MORE. SO PLEASE EMAIL US YOUR ZIP CODE FOR QUOTE PRIOR TO PAYMENT or BIDDING. ... moreWe try to describe the items that are selling on eBay as best as we can. We never intentionally mislead anyone. That is the main reason that we take lots of photos. So we could show you any flaws. And because we are human, we do make mistake. If we made a mistake on our ad. examples- not functioning correctly, wrong description, wrong item, etc. We will offer full money back guaranty excluding S&H. You will have 14 days from the delivery date to inspect our items. Most of our auction have NO RESERVES. and/but we do reserve the right cancel our auction at anytime. If the reserve price is not met, if there is reserve) and vice versa, if the reserve is metwe will take it off our shelf. We display the items that we are selling on e-Bay also in our store, so first come first serve. We are here to help! Please email or call us if you have any questions at all prior to bidding. Our Store Hours are 10 AM TO 6 PM MON THROUGH SAT. 503)760-1776 Serious bidders only please. Thanks again for watching our auctions
28volt lithium ion tool kit Comes with: Drill Sawzall Circular saw Impact wrench! Flashlight(not pictured) 2 batteries Charger Carry bag This comes with the impact wrench which is $500 new! Everything works great. Drill was the only thing really used. Shipping within continental US. Addition costs to Alaska and Hawaii Posted with
Up for bid is a Starrett 232 0-1/2" 001 micrometer tool. This is in very good condition. Thanks for looking and good luck bidding.
ADVERTISING BOOKLET TRIGONOMETRY TABLES& INVOLUTE FUNCTIONS ILLINOIS TOOL WORKS MACHING TABLES& CALCULATIONS
Used. In excellent condition, SIOUX 1980F Pneumatic Router with Finger Trigger, 20,000 rpm, 3/8" collet. Unit comes with the two wrenches for the collet. Unit has the previous owner's engravings on it. 100% Satisfaction Guarantee. If you're not fully satisfied with your purchase. Return it within 14 days for a full refund less ebay fees and shipping. Returned units must be unused in original package 060113C1B
in titles& description Name: 5 DRAWER LISTA TOOL CABINET, Ticket# 21952, Manufacturer: Lista, Item located at: Hanover. MD, Condition: Used, Terms& Condition: As is where i, Description: REMOVAL DEADLINE: ITEMS MUST BE PAID FOR. PICKED-UP OR SHIPPED BY FRIDAY JUNE 21st. PLEASE NOTE: LOADING IS AN ADDITIONAL FEE WHICH INCLUDES REMOVING THE ITEM AND LOADING, IT DOES NOT INCLUDE SKIDDING, PACKAGING OR SHIPPING(BUT RATES CAN BE PROVIDED UPON REQUEST) LOADING FEE: $50; NO CONTENTS INCLUDED. DIMS: 28X30X33(LOCKED) | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008. F04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13f3eec3c92-0xf3-
Up for auction is a lightly used Emco 6" Dividing Head Rotary Table. In good working condition, moves freely, has a few minor"oops" marks on it(pls see pics) Includes 3 Index Plates and original cardboard box(box is beat up) Please see my other machinist tools
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. Seems to be in good used condition. PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH ... moreYOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID. BT
3 good used setup blocks Arnett tool approx 1 x 2 x 3 will ship for $5.80 anywhere in the USA please check my other auctions and happy bidding! everything we can combine into a medium USPS flatrate box will ship for $11.35 anywhere in the USA Powered by The free listing tool. List your items fast and easy and manage your active items.
SOTTOF SALES From the estate of a Tool& Die Maker. They are all similar in size but NOT matched, all holes are tapped, marks from use. No clamps just what is shown. Older well made tools. Please look carefully at all the photos to see condition. And design features D3598.14 EBAY AUCTION POLICIES: International Bidders Please Inquire About Shipping Cost Prior To Bidding All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements have been made with us, just call or email) Any deposit or payment issued by that ... morebidder is considered non-refundable. If the item(s) is/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items will be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-13f3ef12562-0xea-
Vintage bicycle chain link extractor tool. The Coventry" Mae in England. In very good condition. k5n.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rkpg%7C%3Ek5n-13f3ef18dba-0xf5-
Good condition. FREE shipping. This is part of the Wenger collection. to see about me On Jun-08-13 at 14:22:44 PDT. Seller added the following information:
DESCRIPTION COLLECTABLE VINTAGE DENTIST MEDICAL TOOL INSTRUMENT DENTAL FILLING CASH ENGLAND#5 AMALGAM CARRIER 6 INCHES LONG PLEASE SEE OUR CLEAR PHOTO's GET IT FAST! ALL OUR ITEMS ARE DELIVERED PROMPTLY AND WELL PROTECTED PAYMENT INFORMATION Payment options for winning bidders in the United Kingdom Postal Orders please do not cross as we can then cash them locally Cheques providing it is in GB£ and drawn on a UK bank account Paypal Payment options for winning bidders outside the United Kingdom Paypal SORRY BUT WE WILL NOT ACCEPT PERSONAL CHECKS FROM OUTSIDE THE UNITED KINGDOM OR ANY TYPE OF MONEY ORDER DUE TO HIGH BANK CHARGES IN THE UK AUCTION TERMS AND CONDITIONS All winning bidders enter a legally binding contract to buy the item/ items won and agree in full to these Terms& Conditions. Buyer is responsible for all for all ... morePostage& Packing costs shown on the auction(e. o.e) All payments are non negotiable and must be payed in full and cleared before items are shipped. If we are unable to establish contact with the winning bidder within 3 days of the end of the auction or if payment is not received within 5 days. We reserve the right to resell the item and we will start the non payer process. Please allow two business days for payment verification and packaging when using paypal and seven business days for clearance and packaging if payment is made by cheque. Please ensure that your Ebay and Paypal details are correct before payment is made Returns Policy AUCTION ITEMS- ALL ITEMS ARE SOLD"AS IS" AND RETURNS ARE NOT ACCEPTED All items are sold BUY IT NOW ITEMS- RETURNS ACCEPTED WITHIN 7 DAYS OF RECEIPT. PROVIDING THEY ARE RECEIVED BACK IN A SALEABLE CONDITION, POSTAGE WILL NOT BE REFUNDED AND THE ITEM WILL BE SUBJECT TO A 20% RE-STOCKING FEE. Powered by
this auction is for just the wrench/ adjustment tool used on all current and older TaylorMade drivers. Fairway woods, hybrids slightly used. But still perfect will come with booklet from RBZ Stage 2
Please ask all questions early in auction as we are not in our office 24-7. Please be prepared to pay in 3 days. This auction is for a Firefighter Leather Canvas Ax Tool Belt w/ American La France Steel Hook Kansas City Missouri. I bought this from the original estate this week& the Gentlemen was a retired firefighter in KC long ago in the 40's& 50's. Complete measuring 43" long& 5" wide.See photos for condition& markings. W e are happy to combine shipping per weight& carton size. So please ask. We require full payment in 3 days. We are shipping all USPS. Thank you!
USED DANIELS MFG TOOL KIT M83521/6-01. WORKS GREAT NO MISSING PIECES, ALL TOOLS ARE IN GREAT CONDITION NO DENTS OR SCRATCHES ON ANY REFER TO THE PICTURES PLEASE! NSN: 5180-00-079-3400 10.00 SHIPPING INSIDE THE U.S ONLY! NO RESERVE! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13f3f074afe-0xfe-
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Fine Antique French 18k Gold Stiletto. French Empire Embroidery Tool All items and photos are the express property of Antiques& Uncommon Treasure. No reproduction without prior written consent. If you like what you see. Be sure to click here to add us to your Favorite Ebay Seller's List. We'll be sending out sale notices and special deals to our'Favorites' customers. These came along with a needle case and a scissors. And also a bodkin and just the tray from an old Palais Royal sewing box. I decided to part it out, knowing from experience we will never match it to a sewing chest- they're just all different and unique. But if the same person buys the entire group, they will come with the fitted lift-out tray(not shown) This is the superb large stiletto from ... morethat set, the ram's head mark can be found at the neck of the gold handle, just where the regulations of France designate it should be. That mark is the mark used to guarantee this is solid 18k gold. This is an early set, date mark c.1819-1838. Image Hosting by Ruby Lane Return Policy: We always honor a 3-day return on our items. And guarantee them to be as described. Money back, less shipping costs, which are not refundable, so ask questions if necessary. We're easy to deal with. Shipping and Handling Policy: You are very important! Our fine inventory is very important. And your ranking of our performance is also very important! We wish to keep our 4.9- 5 star ratings in all categories. Customer satisfaction is paramount with us. So if you're thinking we have not deserved your highest marks, please contact us and allow us to be sure your concerns are completely satisfied before you rank us. We aim for 5-star transactions every day, and depend upon you to tell us directly if we have not yet met that standard for your transaction. Thank you! We most often use USPS for our shipping needs but will be happy to ship by another carrier if you prefer. We charge only actu
1949 Farming Magazine Jeep Truck Advertisement"Handiest Tool on any Farm" Sized at 8.5" by 11" All buyers pay shipping on first ad. All other ads simular sized. Ship free, when payments are combined. Please request a manual invoice, to recieve shipping discount. Inventory: jeep small f-1:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-13f3f0c8794-0xe5-
Up for auction is a lightly used Alina 4" Scroll Chuck. That came off a 9" South Bend Lathe, 3 Collet, made in Switzerland, in good working condition, moves freely. Includes a 1957 3-page catalog Please see my other machinist tools
Up for auction is a barely used Atlas 4" 4-Jaw Chuck#M6-884B. 1"10 TPI, made in England, in good working condition. This exact chuck is found in the Atlas catalogue. Jaws are reversible and the Key is NOT original Please see my other machinist tools.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13f3f112838-0xfe-
Up for auction is a lightly used South Bend 6" 4-Jaw Chuck#4206. 1-1/2"8 TPI, made by Skinner, in good working condition. Jaws are reversible Includes Key Please see my other machinist tools
Up for auction is a barely used Bison 4" 3-Jaw Chuck#3204. In good working condition. The back mount measures approx 2-3/4" x.145 with a 3-1/4" 3-hole bolt pattern 5/16"20 Includes Reverse Jaws and Key(key does NOT look original) I will include the 3 screws(not seen in pics) Please see my other machinist tools