1 Drive Impact Wrench 1 Impact Wrench 1 Inch Impact 1/2 Air Drill 16 Gauge Air Nailer 16 Gauge Stapler 3/4 Impact Wrench 90 Degree Drill 90 Drill Air Hose Reel 50 Air Impact Wrench 3 8 Air Nailers Air Needle Scaler Air Rivet Gun Air Rivet Tool Air Riveter Air Screwdriver Air Stapler Air Tool Accessory Kit Aircraft Gun Aircraft Rivets Aro Air Tools Aro Grinder Atlas Copco Air Tools Atlas Copco Drill Atlas Copco Pneumatic Bostitch Floor Nailer Bostitch Floor Stapler Bostitch Framing Bostitch Stapler Bucking Bar Cherry Max Chicago Pneumatic Gun Chicago Pneumatic Impact Wrench Chicago Pneumatic Rivet Clecos Coil Nailer Compression Riveter Crown Stapler Desoutter Dotco Air Tools Dotco Grinder Duo Fast Stapler Dynabrade Grinder Finish Stapler Floor Nailer Floor Stapler Flooring Nailer Flooring Stapler Frame Nailer Framing Air Nailers Framing Nailer Goodyear Air Hose Hardwood Floor Tools Hitachi Hitachi Framing Nailer Hitachi Nailer Huck 352 Huck Rivet Gun Impact Wrench 1 Inch Ingersoll Rand 1 Impact Ingersoll Rand Drill Ingersoll Rand Impact Wrench Inline Oiler Matco Impact Wrench Nail Gun Nails Nailer Nutrunner Palm Drill Palm Nailer Pneumatic Air Tools Pneumatic Chipping Hammer Pneumatic Drill Pneumatic Driver Pneumatic Grinder Pneumatic Rivet Gun Pneumatic Torque Wrench Pneumatic Wrench Pop Riveter Right Angle Die Grinder Rivet Bucking Bar Rivet Buster Rivet Set Rivet Set Tool Rivet Shaver Rivet Squeeze Rivet Squeezer Riveter Senco Senco Nailer Senco Pw Shear Wrench Siding Nailer Sioux Air Drill Sioux Air Tools Sioux Drill Sioux Grinder Sioux Tool Tool Uryu
 In 
 
Order by: 
Available to: 
Price: 
 - 
$
55
Buy It Now
$7 Shipping
Condition: New
Location: Chino,CA,USA
$
196.8
Buy It Now
$0 Shipping
Condition: New
Location: Latvia
$
32.99
Buy It Now
$0 Shipping
Condition: Used
Location: Ventura,CA,USA
$
62.01
Buy It Now
$0 Shipping
Condition: New
Location: Chino,CA,USA
$
682.58
Buy It Now
$0 Shipping
Condition: New
Location: Melville,NY,USA
$
96.81
Buy It Now
$0 Shipping
Condition: New
Location: China
$
99.95
Buy It Now
Free Shipping
Condition: Used
Location: Riceville,TN,USA
$
199
Buy It Now
$15 Shipping
Condition: Seller refurbished
Location: Pasadena,TX,USA
HI UP FOR SALE IS THIS CHICAGO PNEUMATIC GRINDER/SANDER MODEL CP-3370 SAGAVED CTR-36261 THAT WILL USE A 9" SANDING DISC. AND WILL DO 6,000 RPM. 90 ... morePSI MAX, IN USED BUT GOOD WORKING CONDITION, THIS ITEM WAS TESTED AND IS IN GOOD WORKING CONDITION. IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO EMAIL ME. THANK YOU AND HAVE A GREAT DAY! Check out my! Be sure to add me to your!
$
399
Buy It Now
$0 Shipping
Condition: New – Open box
Location: India
$
200
Buy It Now
Free Shipping
Condition: Used
Location: Indianapolis,IN,USA
$
292.4
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
179
Buy It Now
$0 Shipping
Condition: Used
Location: Centerburg,OH,USA
$
58.28
Buy It Now
$0 Shipping
Condition: New
Location: Chino,CA,USA
$
166.53
Buy It Now
$0 Shipping
Condition: New
Location: China
$
299.99
Buy It Now
Free Shipping
Condition: Used
Location: Lockport,NY,USA
$
239
Buy It Now
$0 Shipping
Condition: Used
Location: Centerburg,OH,USA
$
189
Buy It Now
$0 Shipping
Condition: Used
Location: Centerburg,OH,USA
$
114
Buy It Now
$0 Shipping
Condition: New
Location: Chino,CA,USA
$
58.91
Buy It Now
$0 Shipping
Condition: New
Location: Chino,CA,USA
$
114.04
Buy It Now
$0 Shipping
Condition: New
Location: Chino,CA,USA
$
120
Buy It Now
$0 Shipping
Condition: New
Location: Chino,CA,USA
$
399
Buy It Now
$0 Shipping
Condition: New – Open box
Location: India
$
149.99
Buy It Now
$0 Shipping
Condition: New
Location: China
$
500
Buy It Now
$0 Shipping
Condition: Used
Location: Miami,FL,USA
$
685.96
Buy It Now
$0 Shipping
Condition: New
Location: Melville,NY,USA
$
114
Buy It Now
$0 Shipping
Condition: New
Location: Chino,CA,USA
$
80
Buy It Now
Free Shipping
Condition: New
Location: Salisbury,NC,USA
$
149
Buy It Now
$0 Shipping
Condition: Used
Location: India
$
143.98
Buy It Now
$29.99 Shipping
Condition: New
Location: China
$
499.99
Buy It Now
$75 Shipping
Condition: Used
Location: Bakersfield,CA,USA
$
79.99
Buy It Now
$0 Shipping
Condition: Used
Location: Appleton,WI,USA
$
90
Buy It Now
$0 Shipping
Condition: New
Location: Chino,CA,USA
$
149.99
Buy It Now
Free Shipping
Condition: Used
Location: Lockport,NY,USA
$
99.97
Buy It Now
Free Shipping
Condition: Used
Location: Sunman,IN,USA
This auction is for a lot of BRAND NEW tools. In total there are 8 tools new. 1. 1/4" Air Ratchet Wrench Hook up this 3/8" air ratchet wrench ... moreto your compressed air source and tackle all the jobs that would normally wear out your hand using a manual ratchet wrench! The torque generated is 45 pounds. The cast aluminum body makes the air wrench lightweight yet durable. 45 ft. lbs. max torque, Maximum speed: 150 RPM, Air inlet: 1/4"18 NPT female, Recommended air pressure: 90 PSI, Average air consumption: 4 CFM@ 90 PSI, 2. 1/2" Air Impact Wrench This outstanding air impact wrench gives you the power to easily remove wheel lugs. U-bolts and transmissions! The air impact wrench features a lightweight housing for easy portability, a protective nosepiece and rear bumper. Great for general purpose use as well as automotive applications, this air impact wrench is ideal for the amateur handyman and professional mechanic alike! Rugged. Lightweight die cast aluminum housing, Reversible action, Protective rubber nosepiece and rear bumper, 5/8" bolt capacity, 3. Air Die Grinder Kit This versatile air die grinder gets most grinding and polishing jobs done swiftly and easily! The collet accepts most die grinder accessories on the market for weld breaking. Smoothing, deburring, polishing and grinding. Features include a lightweight die-cast aluminum construction for durability, rear exhaust and a paddle trigger making this a must-have tool for automotive grinding! Compact. Lightweight die cast aluminum housing, Paddle trigger, Rear exhaust, Comes with five mounted stones. Nipple and two double-ended wrenches, 4. High Speed Metal Saw This lightweight metal saw allows you to cut. Trim and shape a wide range of metal and plastic materials with ease. This metal saw cuts through rods, pipes, bars and even 16 gauge sheet metal with speed and efficiency! Features include a rugged die cast aluminum body and a rubber grip for comfortable operation even during long jobs! 9.000 strokes per minute, Rugged die cast alu
$
38
Buy It Now
Free Shipping
Condition: Used
Location: Manchester,NH,USA
$
292.44
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
126.92
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
303.87
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
500
Buy It Now
$0 Shipping
Condition: Used
Location: Miami,FL,USA
$
39.99
Buy It Now
$15 Shipping
Condition: Used
Location: Midvale,UT,USA
$
99.99
Buy It Now
$8 Shipping
Condition: Used
Location: Davenport,IA,USA
$
250
Buy It Now
$0 Shipping
Condition: Used
Location: Miami,FL,USA
$
230
Buy It Now
$0 Shipping
Condition: Used
Location: Miami,FL,USA
$
199
Buy It Now
$0 Shipping
Condition: Used
Location: India
$
229.99
Buy It Now
$0 Shipping
Condition: Used
Location: Millersburg,IN,USA
$
17.31
Buy It Now
$13.99 Shipping
Condition: New – Open box
Location: Middlebury,IN,USA
$
199.12
Buy It Now
$0 Shipping
Condition: New
Location: Melville,NY,USA
$
80.11
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
68.39
Buy It Now
$0 Shipping
Condition: New
Location: China
$
83.99
Buy It Now
$0 Shipping
Condition: New
Location: China
$
48.01
Buy It Now
$0 Shipping
Condition: For parts or not working
Location: Rio Rancho,NM,USA
$
249
Buy It Now
$0 Shipping
Condition: Used
Location: Petaluma,CA,USA
HI UP FOR SALE IS THIS GEORGES RENAULT PNEUMATIC HEAVY DUTY DISC GRINDER MODEL 360B7Y. THAT HAS 90 PSI, 6000 RPM, 6.2 BAR, THIS ITEM WAS TESTED AND IS ... moreIN GOOD WORKING CONDITION. IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO EMAIL ME. THANK YOU AND HAVE A GREAT DAY! Check out my! Be sure to add me to your!
$
19.99
Buy It Now
Free Shipping
Condition: For parts or not working
Location: Yorktown,VA,USA
This large Black& decker grinder/sander does run when I put air to it. Does NOT turn off with the switch and runs constantly. Just no way for me to ... moretest to its full potential due to only having a small compressor. I can only partially test it so I am selling it as is. Many of my items are industrial surplus coming from a factory setting. This means they may be dirty. Greasy, dusty, owner marked, show signs of use, etc. Please be sure to view the pictures to get the best idea of what you are receiving. Ask any questions and I will do my best to get you an answer promptly as long as you do not wait until last minute. Be sure to check out my other items for more great tooling finds.
$
99.94
Buy It Now
$9.95 Shipping
Condition: New
Location: Paramount,CA,USA
Astro Pneumatic Tool 1221 Die Grinder Kit with Rotary Burr Set- 8 Piece 1 yr warranty on material and workmanship Binding:Automotive, Brand:Astro Pneumatic ... moreTool, Item Dimensions Height:2 inchs, Length:12 inchs, Weight:2.65 pounds, Width:7 inchs, Label:Astro Pneumatic Tool, Manufacturer:Astro Pneumatic Tool, ManufacturerPartsWarrantyDescription:Parts, Model:1221, MPN:1221, Part Number:1221, Product Group:Automotive Parts and Accessories, Publisher:Astro Pneumatic Tool, Release Date:Thursday 29th of March 2012 SKU:ISN8429, Studio:Astro Pneumatic Tool, UPC:745227014958, Some of our products offer expedited shipping and one day service for an additional fee. Click on Shipping and payments for more details. Free Shipping is standard and transit time is 4-14 business day. Depending on the size. Kind and supplier of the product, One-day and Expedited Shipping service may not be available* We use different suppliers across the US to ensure your item is delivered as fast as possible. We do not sell used. Fake, refurbished or items shipped from outside of US. IT IS NOT OUR INTENTION TO MISLEAD BUYERS INTO PURCHASING OUR ITEMS SO PLEASE READ THE TITLE AND THE DESCRIPTION CAREFULLY. We sell BRAND NEW items. We do not accept returns due to Buyer Mistakes We do our best to give you the best ebay OFFER! Products are new and shipped from US from multiple suppliers. Shipping We ONLY provide shipping to the 48 continental states in the US. We ONLY ship to the confirmed address on paypal. No exceptions. FAST'N FREE it's an Ebay Estimated Transit Time. Actual transit time is 4-14 bussines days. Orders are not processed for shipments on Weekends or Holidays We also provide you with a tracking number in most of the items so that you can feel confident and comfortable with your purchase. If the item is too small it will not have tracking number. NO shipping to Alaska. Hawaii, Puerto Rico, PO Box, APO/FPO. No discounts for combined shipping because shipping is free in all our Listings No International Shipping
$
160.59
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
102.99
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
75
Buy It Now
$0 Shipping
Condition: Used
Location: India
$
60.37
Buy It Now
$5 Shipping
Condition: New
Location: USA
$
250
Buy It Now
Free Shipping
Condition: Used
Location: Williamsburg,OH,USA
$
399.99
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Bethlehem,GA,USA
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
 In 

Past Items  
 
Sioux 5232 in tested running but sold as is as I only have a small compressor and I does not allow me to test large tools to their full potential. It just tells me if the spin or not. This one spins when given air and you pull trigger. Many of my items are industrial surplus and may be dusty. Dirty, greasy, marked by previous owners, show signs of use etc. Please view pictures to determine if any of these apply to your item. Check out my other items for more great tooling finds.
RUNS but Sold As Is as I only have a small compressor and no way to test to its full potential. Pics of actual item. Handle is a cap head bolt that I do not think can be moved to other side as it has a helicoil in it. Be sure to check out my other items for more great tooling. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-147871779a5-0x115-
This large Ingersoll Rand grinder/sander does run when I put air to it. Just no way for me to test to its full potential due to only having a small compressor. I can only partially test it so I am selling it as is. Many of my items are industrial surplus coming from a factory setting. This means they may be dirty. Greasy, dusty, owner marked, show signs of use, etc. Please be sure to view the pictures to get the best idea of what you are receiving. Ask any questions and I will do my best to get you an answer promptly as long as you do not wait until last minute. Be sure to check out my other items for more great tooling finds.
Tested runs but noisy& occasionally needs tapped to start. I would bet with some oiling and use that would go away. I am sure it has sat before I got it as industrial surplus. Sold As Is as I only have a small compressor and no way to test to its full potential. Be sure to check out my other items for more great tooling.
This large Black& decker grinder/sander does run when I put air to it. Does NOT turn off with the switch and runs constantly. Just no way for me to test to its full potential due to only having a small compressor. I can only partially test it so I am selling it as is. Many of my items are industrial surplus coming from a factory setting. This means they may be dirty. Greasy, dusty, owner marked, show signs of use, etc. Please be sure to view the pictures to get the best idea of what you are receiving. Ask any questions and I will do my best to get you an answer promptly as long as you do not wait until last minute. Be sure to check out my other items for more great tooling finds.
DESCRIPTION: USED. WORKING, ENGRAVED, 1/4" COLLET; 24,000 RPM DIE GRINDER. IT RUNS WITHOUT LEAKS. THE SAFETY LEVER IS MISSING(PIC2) CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT ... moreWAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POW
to our e b a y Store. Have a look around add us to your favorites For your consideration is 1/4" Craftsman Pneumatic Air Die Grinder in Case w/ Attachments included. Tested and works as it should. Comes with all that is pictured. Has wear from use(see pics) they are part of the description. PLEASE CONTACT US WITH ANY QUESTIONS YOU MIGHT HAVE ON THIS ITEM through the EBAY message system. se habla espanol) Thanks THANK YOU FOR LOOKING AND HAPPY BIDDING! FEEDBACK: Feedback is very important to both buyers and sellers. If you are not satisfied with any part of a transaction. PLEASE allow us the first opportunity to remedy the situation. We will do everything possible in our part to resolve the situation. Feedback and the Five-Star Rating is what sellers depend on to survive on eBay. Low ratings hurt us in many ways. I ask you kindly that ... moreyou first allow us to fix a problem should there be one, before you leave us a low rating or a negative feedback. THANK YOU SHIPPING: We can only ship to the address on your payment. TX sales tax is added during checkout. During checkout. Before you enter your PAYPAL information, EBAY will give you the chance to select the shipping address. Please make sure to choose correctly, as it cannot be changed, once its selected. Shipping United States: Items normally ship the next business day after payment is received. We ship FedEx ground. OR USPS Priority mail which are fast, depending on your distance from Texas. Insurance is included in the shipping price. So if something should happen, your purchase is secure. Items above $100 do require a signature at delivery. APO/ FPO is currently not being offered at this time Download the EBAY app to your iphone or Android and track your auctions PLEASE LOOK AT OUR OTHER LISTINGS IN OUR STORE THANK YOU
DESCRIPTION: USED. DOTCO AIR GRINDER. 1/4" COLLET; 18,000 RPM; ENGRAVED; RUNS WITHOUT LEAKS. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE ... moreWINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS.
ALL ITEMS START AT $3.99. CHECK OUT OUR OTHER AUCTIONS Inventory Number: 12091787760 Manufacturer: Description: CLECO 156EL120 PNEUMATIC STRAIGHT SANDER/GRINDER. 12,000 RPM, 3/8" ARBOR Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, WORKS WHEN AIR APPLIES. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end.Unpaid cases open automatically on the 8th day. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: KS. MA, MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax ... moreand you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) We cannot issue shipping refunds after payment has been made. To receive the combine shipping rate you must pay after being invoiced. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday 8am-3pm.Holiday hours vary please call) Saturday pick-up requires 24 hour notice& prepaid with paypal. Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of au
This auction is for a used Ingersoll Rand Angle Die Grinder. It is model 301. This is the older model 301. It is not a model 301B. It is PMAX 90psig/ 6.2 bar, RPM 20,000. It is made in China. I do not see any marks or engravings. It has some scratches. All my items come from a smoke and pet free home. Shipping. Handling, and delivery confirmation is $8.00. Please pay by pay pal within 7 days of the auctions close. I accept pay pal only. Message me through ebay with any questions. I do not ship outside the US. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1478bafde01-0x11c-
Good working condition. This was in my step-fathers shop between 1970's ti 2000. I do not know the age. But it works.
THIS Extended Industrial Die Grinder WAS MADE BY ROTOR TOOL CLEVELAND OHIO.MEAURES 16' OVERALL AND WORKS FINE
You are bidding on a Used But in a Good condition Air Die Grinder Kit 44716. 10 Grander pieces. Please see pictures What you see what you get. versatile air die grinder kit with polishing and grinding accessories This air die grinder kit offers endless possibilities in one lightweight. Compact package. Choose an accessory for the die grinder and tackle projects including weld breaking, smoothing sharp edges, deburring, polishing and grinding! Featuring a trigger lever with a safety latch, this air die grinder was designed for top-notch utility and performance. Compact. Lightweight die cast aluminum housing, Paddle trigger with safety, Rear exhaust, Specification: Average air consumption 4@ 90, Diameter 1/4 in. 1/8 in. Exhaust location Rear, Maximum speed(rpm) 22.000 RPM, Air inlet size 1/4 in. 18 NPT, Collet size(in. 1/4 in. Accessories Included ... more1/4" and 1/8" collet. 10 grinding wheels, carrying case,
Good working angle grinder. Pad on grinder removed. Threads are 5/8-11. This was in my step-fathers shop between 1970's to 2000. Not sure of the age. Handle not in image but I did find it. Good luck bidding. 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-147933ab8bf-0x109-
Positive feedback is VERY important to us! Please contact us with any concerns you may have with your purchase! Ridgid JobMax Pneumatic Base Console R9020PN w/ Name brand Die Grinder Ridgid JobMax Pneumatic Base Console R9020PN W/ Name Brand Die Grinder Is in original Package: No, No, This item basic features have NOT been tested and is NOT guaranteed against DOA. Our testing department does not have the facilities needed to test this item. From Tester: the air hose has no damages and was not tested and has not been used. the hose kit was not tested and has no damages and has not been used. the air grinder appears to have had slight use and rotated when the button was pressed when connected to the air supply. the rigid item powered on and performed properly. it had no damages and appears to have slight use. no manual was present. From Lister: ... moreCompare at $140.00 regular retail! Hover To Enlarge. Empire SKU: 668130 | Listed by: afinch. Manufacture Description. Ridgid JobMax Pneumatic Base Console R9020PN w/ Name brand 1/4in Die Grinder H4220. Amflo 3/8in air hose and more About Us. We do not have any additional details about the condition or contents of any auction item package other than what is already stated above. We do not refurbish these products. Important Points: Tag- We do not have any additional details about the condition or contents of any auction item package other than what is already stated above. We do not refurbish these products. Shipping. Tag- Items ship via standard ground service only. No exceptions. Items ship within 3-6 business days of payment clearing. Then taking 2-6 additional days to reach the destination. Empire Liquidators has multiple shipping points and does not combine shipping. Shipping to the 48 contiguous states only. No shipping to Alaska. Hawaii, Puerto Rico. When using PayPal we ship only to the confirmed PayPal address. We cannot ship to APO/FPO or PO box addresses. We cannot ship with 3rd party tags: i.e. your FedEx/UPS account. Unless you have a valid NYS Sa
4 in. Air Angle Grinder Condition: Used. Tested and works great. Thanks, Trevor 2293937307 This angle grinder is ideal for cutting and shaping your metal work pieces quickly and efficiently. A contoured throttle lever provides superior control for applications from feather edging to full speed grinding. This ANSI certified angle grinder is a great metal working tool for the do-it-yourselfer and professional alike. No load speed: 10.000 RPM Meets ANSI specifications Meets ANSI specifications, Grinding wheel sold separately. Specifications. Name 4 in. Air Angle Grinder, SKU 95504, Brand Central Pneumatic, Average air consumption 6 CFM@ 90 PSI, Exhaust location Front, Maximum speed(rpm) 10.000 RPM, Working pressure(psi) 90 PSI, Air inlet size 1/4 in.18 NPT, Disc size(in. 4 in. Product Height 3-3/4 in. Product Length 7-1/2 in. Product Weight ... more2.65 lbs. Product Width 5 in. Shipping Weight 3.10 lb. Spindle size(in. 3/8 in. Merchandise: We buy and sell merchandise from Harbor Freight. Our merchandise is not covered by the Harbor Freight warranty. We buy merchandise that has been returned from Harbor Freight customers. We test everything. And list each unit per the condition we see fit. New other is defiend by us as probably not ever used looks and seems brand new. Shipping: Non-Freight: We ship domestic and international Monday through Friday. We ship items no later than the next business day your payment clears. All of our shipping prices are our best attempt to ship each item at the lowest price possible to save you money. We recommend USPS priority international mail for international delivery. Freight: We use unishippers for all of our freight shipping. If you would like a quote on an item please include your complete address and whether we are shipping to a business with a loading dock. A business without a loading dock, residential, or a freight terminal near the zipcode. If you would like to pick-up the item rather than have us ship it we don’t mind. Contact us at 229-393-7307 to arrange pick-up at
1/8" Air Micro Die Grinder Condition: Used. Tested works great. Thanks, Trevor 2293937307 Description. This handy die grinder features a“pencil-style” shaft that allows for better control than bigger die grinders! The 1/8" collet accepts most accessories on the market. Features include a variable speed to accommodate a variety of cutting. Grinding, polishing or deburring applications. This versatile die grinder is a must-have tool for any detail work on small metal parts or hobby projects! The die grinder includes an air hose, inline oiler, brass coupler and two wrenches stored and organized in a custom carrying case. Variable speed, Rear exhaust with deflector, Easy twist on/off switch, Compact body is just 5/8" diameter, Specifications. Name 1/8" Air Micro Die Grinder, SKU 60244, Brand Central Pneumatic, Average air ... moreconsumption 2 CFM, Exhaust location Rear, Maximum speed(rpm) 56.000 RPM, Working pressure(psi) 90 PSI, Air inlet size 1/4 in. 18 NPT, Collet size(in. 1/8 in. Product Height 1-3/8 in. Product Length 56 in. Product Weight 0.66 lbs. Product Width 1-3/8 in. Shipping Weight 1.60 lb. Merchandise: We buy and sell merchandise from Harbor Freight. Our merchandise is not covered by the Harbor Freight warranty. We buy merchandise that has been returned from Harbor Freight customers. We test everything. And list each unit per the condition we see fit. New other is defiend by us as probably not ever used looks and seems brand new. Shipping: Non-Freight: We ship domestic and international Monday through Friday. We ship items no later than the next business day your payment clears. All of our shipping prices are our best attempt to ship each item at the lowest price possible to save you money. We recommend USPS priority international mail for international delivery. Freight: We use unishippers for all of our freight shipping. If you would like a quote on an item please include your complete address and whether we are shipping to a business with a loading dock. A business without a loading dock,
Up for auction is a Chicago Pneumatic inline grinder with attachment head that looks like a belt sander attachment? Turns well at 12.000 RPM. Item does have some previous owners engravings on it. I do combine shipping for US buyers. Buyers using the International Shipping Program are eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items for sale! Payment is due within 72 hours end of auction.
PLEASE READ THE AD I EXCEPT PAYPAL PAYMENT MUST BE RECEIVED WITH IN 48HRS NO REFUNDS NO RETURNS No shipping to APO/ FPO. I WILL SHIP TO THE LOWER 48 US STATES NO HAWAII NO ALASKA THANKS& GOOD LUCK Bartell Pneumatic Air Concrete Scarifier Grinder Descaler modle sp2a 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-147ac4970d4-0x113-
Well Used and Untested. IIT Grinder Eagle Industries Angle Grinder Universal Power Tools 3/8 Rachet AS IS
3/8 DRIVE IMPACT-SLIDE BUTTON REVERSER GOOD SNAP RING BOTTOM REGULATOR KNOB. FEW ABRASIONS ON HOUSING. SMOOTH RUNNING W/ GOOD POWER. TORQUE UNKNOWN. 1/4 N.P.T. INLET 3/8 Drive Drill 3/8 Drive Ratchet Die Grinder Attachments
CHICAGO PNEUMATIC MODEL CP9540-DRIVE: 1/2" REVERSIBLE-SPINS GOOD IN BOTH DIRECTION-COMES AS PICTURED 4" CP GRINDER CUT OFF WHEEL GRINDER GREAT BUY
Ingersoll Rand Ingersoll-Rand Model 88V60P107 r/min 6000 rpm rated air pressure 90 psig/ 6.2 bar max Air Pneumatic Grinder for use with type 27 and 28 wheels includes: Grinder In good working condition. Normal signs of wear and use. Fully functional. some signs of rust(view pics) unit is dirty(view pics) overall in good condition. Please view pics to see exactly what you get. Please view pics on condition. Please don't hesitate to ask any questions. Payment is due within two days after auction ending. Serious buyers only. Thank you for looking. Posted with
This auction is for a Blue Point AT155 air angle head die grinder. Has seen it's fair share of use but is still a quality tool. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-147b0ee66e6-0x10d-
Vintage Chicago Pneumatic grinder air 7" sander Works Great This is a quality old tool It sounds really cool too. I ship in 1 business day of payment receipt with tracking information 643.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E643-147b3f541c2-0x112-
Stanley 4500 RPM Pneumatic Air Grinder V50L-45 Description- Model: V50L-45. Free Speed: 4500 RPM. Max PSIG: 90. This items shows normal wear and tear. This item has been tested and is in good condition. 6068(MI) 08/07/2014 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the ... moreproblem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dimensional restrictions. International weight and size restrictions vary. We will ship your item to the
VERY GOOD CONDITION.
VERY GOOD CONDITION. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-147b4044580-0x10d-
TOP CAT 56V PNEUMATIC AIR GRINDER. 7" INCH, PROFESSIONAL PRO TOOL. Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size TOP CAT 56V PNEUMATIC AIR GRINDER. 7" INCH, PROFESSIONAL PRO TOOL. This listing is for a pneumatic tool. Make: Top Cat, Model/ Part# 56V, Description: Professional Grinder; 7" Seven Inch) Air/ Pneumatic, Includes all/only items pictured. Please note that we(Kellan Inc) are a commercial and industrial surplus product dealer. We acquire our products from company closures. Obsolete systems, government surplus, ... moreoverstock, etc. Unless otherwise indicated, all products include our 14-day warranty. However, most products do not include a"manufacturer's warranty" Products are tested to the best of our abilities. This can include a power-up test. Navigating menus, performing simple operational tests, etc. We do not always have the resources and/or abilities to fully test each item we sell. However, we do guarantee and warranty all of our products(unless otherwise advertised"as is" broken" etc. Our standard guarantee/warranty period is 14 days. This period begins on the delivery date. This gives the customer enough time to receive, inspect, and test the product- to make sure the product is satisfactory. If there are any issues, please contact us. We present our surplus products as accurately as possible. Please note that our products only include the pictured items. If an item is not in the picture(i.e. a power adapter. Electrode, original packaging, etc. it is likely not included. That rule applies to"new in box" and"new, no box" items. Sometimes, if the original packaging has a lot of shelf-wear, we will discard it. If you have any questio
Puget Sound Pawn Depot We Take Great Care In Providing Detailed Descriptions Of Our Items. The Descriptions Provided For Each Individual Item Are Clear And Precise. If Something Is Not Described In A Listing Please Do Not Assume Inclusion Of Anything Outside Of The Description. The Assumption Of Inclusion Of Anything Outside Of Our Description Is Not Our Responsibility. If You Have Any Questions Regarding Details Of An Item Please Ask Us Prior To Making Your Purchase. Chicago Pneumatic Model CP3650 Pneumatic Grinder FREE SHIPPING! Puget Sound Pawn Depot We are a small family owned pawn shop. Hours of Operation 7 Days A Week 10am- 7pm pst Shipping We ship all items within 2 business days of purchase. Shipping is via usps priority with tracking and delivery confirmation. Returns We take great care in describing our items clearly and accurately. ... moreWe do not accept returns unless the item has been grossly misrepresented. Customer satisfaction is our top priority.
HUSKY 1/4 Inch Angle Die Grinder Pneumatic Air Tool Item is used! Item came here to us at the pawn shop. Was tested and works great. Has scratches. Scuff marks and dirt- see pictures. Fair cosmetic condition. Fitting is missing- see picture 6. FREE SHIPPING! Picture is actual item you will receive. Please see pictures for best item description. PLEASE NOTE: This is a used item and is being sold as found. As is- What you see in the pictures is what you will be receiving. Please read the item description and look at the photos carefully before bidding We will describe the item to the best of our ability. PLEASE ASK QUESTIONS PRIOR TO BIDDING. WE WILL BE MORE THAN HAPPY TO ANSWER QUESTIONS THE BEST WE CAN. Buyer assumes responsibility for all shipping and processing charges. THIS AUCTION IS FOR 1(one) item unless otherwise specified. Delaware ... moreGold& Pawn reserves the right to end any auction at anytime! All of our items will typically ship within 2-3 Business days After payment is confirmed. WE ONLY ACCEPT PAYMENT THROUGH PAYPAL AND ONLY SHIP TO U.S. ADDRESSES Except Hawaii. Alaska and Puerto Rico. We use only UPS Ground Service and are not able to ship to P.O Boxes and APO's. Be sure to check out our other items and save us as a favorite seller! Keep an eye on our auctions. You never know what we might have! We are a Pawn Shop and buy most of items from our walk-in customers. We Strive for nothing less than 5 Star FeedBack and 100% satisfied buyers! If for any reason you are not completely satisfied with your purchase before leaving feedback Please contact us with any questions or concerns at 302-384-6734 ask for Dan In Internet dept. We appreciate you looking at our items. Good luck and Happy Bidding.
TopCat Handheld Pneumatic Belt Grinder Manufactured by TC Servis Co Cleveland. OH Model 56H 6.000 RPM 2" Wide Belt x Approximately 21" Length Heavy Duty 4" Diameter Rubber Contact Wheel Includes Mount for Mounting on Lathe Quick Change Tool Post w/ 1-3/16" Tang Measures 21" Overall Length No Reserve! Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made. We accept PayPal. Cashier's Checks, Money Orders or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week(Monday ... morethru Saturday) We cannot issue shipping refunds after payment has been made! To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice. I f you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.
TOP CAT 56V AIR PNEUMATIC GRINDER. 7" INCH, TOPCAT, PROFESSIONAL PRO TOOL. Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size TOP CAT 56V AIR PNEUMATIC GRINDER. 7" INCH, TOPCAT, PROFESSIONAL PRO TOOL. This listing is for a pneumatic tool. Make: Top Cat, Model/ Part# 56V, Description: Professional Grinder; 7" Seven Inch) Air/ Pneumatic, Includes all/only items pictured. Please note that we(Kellan Inc) are a commercial and industrial surplus product dealer. We acquire our products from company closures. Obsolete systems, government ... moresurplus, overstock, etc. Unless otherwise indicated, all products include our 14-day warranty. However, most products do not include a"manufacturer's warranty" Products are tested to the best of our abilities. This can include a power-up test. Navigating menus, performing simple operational tests, etc. We do not always have the resources and/or abilities to fully test each item we sell. However, we do guarantee and warranty all of our products(unless otherwise advertised"as is" broken" etc. Our standard guarantee/warranty period is 14 days. This period begins on the delivery date. This gives the customer enough time to receive, inspect, and test the product- to make sure the product is satisfactory. If there are any issues, please contact us. We present our surplus products as accurately as possible. Please note that our products only include the pictured items. If an item is not in the picture(i.e. a power adapter. Electrode, original packaging, etc. it is likely not included. That rule applies to"new in box" and"new, no box" items. Sometimes, if the original packaging has a lot of shelf-wear, we will discard it. If you
Up for sale is a Central Pneumatic straight die grinder Works and looks good I am happy to combine shipping! On all impacts. Not just the ones I sell, make sure you have the air supply needed to power them. For decent power I recommend at the very least a 15 gallon tank and a 3/8 air hose. Most of the problems people report to me on impacts come down to this! They will work with a smaller system but not at their best. Understand this when bidding please. Note This model is pretty good on low air consumption. I test each of these items before listing but I can't take them each to work for a week. If there is any issue please contact me before leaving feedback. Most likely we can work it out! My customers satisfaction and my standing with eBay are extremely important to me! I'm not happy until you are!
DYNABRADE IN-LINE DIE GRINDER MODEL# LBB 34 1/4" COLLET 6.000 RPM THIS USED TOOL RUNS GREAT AND IS IN GOOD USED CONDITION. FORMER INVENTORY CONTROL NUMBERS ARE ENGRAVED ON TOOL
DYNABRADE IN-LINE DIE GRINDER MODEL# 51201 1/4" COLLET.4 HP 3.200 RPM THIS USED TOOL RUNS GREAT AND IS IN GOOD USED CONDITION. FORMER INVENTORY CONTROL NUMBERS ARE ENGRAVED ON TOOL
Up for sale is a Central Pneumatic right angle die grinder Works and looks good I am happy to combine shipping! On all impacts. Not just the ones I sell, make sure you have the air supply needed to power them. For decent power I recommend at the very least a 15 gallon tank and a 3/8 air hose. Most of the problems people report to me on impacts come down to this! They will work with a smaller system but not at their best. Understand this when bidding please. Note This model is pretty good on low air consumption. I test each of these items before listing but I can't take them each to work for a week. If there is any issue please contact me before leaving feedback. Most likely we can work it out! My customers satisfaction and my standing with eBay are extremely important to me! I'm not happy until you are!
This is a used in working condition Cleco(Dresser) 116GLF 250 pneumatic inline grinder. 25.000RPM* 1/4" NPT* 90 PSIG Our son in law recently passed away and these were his tools. They were maintained well. We offer a 14 return policy. We will ship same or 1 day after payment received. Thank you.
Nu-Jett Pneumatic PRECISION PENCIL GRINDER MODEL 100 I purchased this at an estate sale so I don't know much about it. It has a 6 foot hose on it. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-147c352d1bc-0x112-
Aro Industrial Pneumatic Die Grinder 80.000 rpm 1/4" Collet Model# 7335 80.000 rpm is very impressively smooth Slightly used Excellent Condition Aro Brand is high Quality Includes rotary file Thanx for Looking.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-147ca143fab-0x10a-
Hi there you are bidding on a lightly used Dotco straight grinder/polisher model number 10k5106-01.If you know anything about air grinders then you know dotco is the best.These are made in Ohio.If you want a grinder to last a lifetime then this is the grinder for you.This grinder sells for over 1000.00 bucks,I am no longer able to work so I am selling my tools.Just so you know you can buy different attachments to put on the end of grinder,such as big wheel stones for hard die guys you can put a big polish wheel on the end,you can also put a carbide cutter attachment on the end for you Kirstie guys.Grinder looks good and runs awesome 6000 rpm.please email me any questions.i will only ship to lower 48 but if you really want this grinder maybe we can work something out but please email me first.Also there is no engravings in this grinder.thanks ... moreand good luck bidding. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-147cd6c709d-0x107-
I DO COMBINE SHIPPING. SO CHECK OUT MY OTHER ITEMS AND WAIT TO PAY TILL ALL ITEMS BIDDING ON HAVE BEEN WON AND I HAVE SENT YOU A COMBINED INVOICE
4 in. High Speed Cut-Off Tool Condition: New Opened box to test. Works great. Thanks, Trevor 2293937307 Description. This high speed cut off tool allows you to slice easily through straps. Hangers, exhaust systems and sheet metal! A safety trigger prevents accidental start-up and the cut off tool features regulated flow and rear exhaust. This variable speed cut off tool makes quick work of cutting applications in the shop, garage or auto body shop. Variable speed, Safety trigger, Rear exhaust, Cutting disc sold separately. Specifications. Name 4 in. High Speed Cut-Off Tool, SKU 61480, Brand Central Pneumatic, Average air consumption 5 CFM@ 90 PSI, Color Silver, Material Cast aluminum, Maximum speed(rpm) 18.000 RPM, Working pressure(psi) 90 PSI, Air inlet size 1/4 in-18 NPT, Arbor size 3/8 in. Blade size 4 in. Product Length 7 in. Recommended ... morehose size(in. 3/8 in. Shipping Weight 1.90 lb. Merchandise: We buy and sell merchandise from Harbor Freight. Our merchandise is not covered by the Harbor Freight warranty. We buy merchandise that has been returned from Harbor Freight customers. We test everything. And list each unit per the condition we see fit. New other is defiend by us as probably not ever used looks and seems brand new. Shipping: Non-Freight: We ship domestic and international Monday through Friday. We ship items no later than the next business day your payment clears. All of our shipping prices are our best attempt to ship each item at the lowest price possible to save you money. We recommend USPS priority international mail for international delivery. Freight: We use unishippers for all of our freight shipping. If you would like a quote on an item please include your complete address and whether we are shipping to a business with a loading dock. A business without a loading dock, residential, or a freight terminal near the zipcode. If you would like to pick-up the item rather than have us ship it we don’t mind. Contact us at 229-393-7307 to arrange pick-up at, 6500 Hwy 9 Unit D-2 Felton. CA 9
CLECO 1760-VSL VERTICAL GRINDER 6000 RPM Used but in good working condition. Specifications- Model: 1760-VSL Free Speed RPM 6.000 Rated Horse Power 3.0 Throttle type Lock Off lever Weight with guard 9 1/8 lbs. 4.1 Kgs. Overall Height 7 in. 178 mm Arbor size 5/8" 11 Depressed center wheel capacity 7" 9" Type 27 Standard wheel guard 7" Type 27& 28 Condition This set is in good working condition. As pictured. Seller reserves the right to end the listing early if item sells locally. Buyers in California will be charged 8% sales tax due to state requirements. TERMS& CONDITIONS By placing a bid on this item. You are agreeing to all of the following Terms& Conditions, and agree to the shipping charges stated for this auction. If you win this auction. Payment must be received within 7 days from the end of the auction ... moreor we reserve the right to resell the item. Buyer is responsible for all shipping charges. Shipping Calculator Please be aware that we are using the eBay Shipping Calculator to offer a fair shipping cost to you for this item. To make sure you are getting an accurate quote via the eBay shipping calculator. Make sure your zip code is the default zip code when calculating the shipping cost for this item. Once more, the shipping cost is based on UPS Ground rates, although we are shipping this item FedEx Ground. unless otherwise stated in the description area. Item stock number: 408024.
Not able to get much detailed information on this grinder. Made in USA Feels like a solid grinder Please feel free to ask any questions or request more pictures. Thank you for looking.
DOTCO ANGLE PNEUMATIC GRINDER SANDER 12000 RPM MODEL 12L1280-36B3. IN GOOD SHAPE WORKS GOOD. PLEASE LOOK AT THE PIC'S FOR MORE INFO AND COND. I TRY TO DESCRIBE ALL OF OUR ITEMS AS ACURATELY AS POSSIBLE. ALL OUR ITEM ARE SOLD AS USED UNLESS STATED OTHERWISE.EVERYONES OPINION OF CONDITION IS DIFFERENT SO PLEASE TAKE A LOOK AT THE PICTURES AND DECIDE FOR YOURSELF. BEFORE YOU OPEN A EBAY CASE. PLEASE EMAIL, LET WORK IT OUT, ITS QUICKER AND BETTER. I DO NOT APPRECIATE NEGATIVE FEEDBACK ALL HAS A SOLUTION! WE CAN ALWAYS WORK SOMETHING OUT. I ACCEPT PAYPAL- PAYPAL CONFIRMED ADDRESS PREFERRED- I SHIP EVERY MONDAY. WEDNEDAY AND FRIDAY OF THE WEEK,SO PLEASE BE PATIENT YOUR ITEM WILL BE SHIPPED AS SOON AS POSSIBLE- SORRY NO INTERNATIONAL TRANSACTIONS ALSO NO SHIPPING LARGE ITEM TO P.O. BOXES, ALASKA,HAWAII APO or FPO.WILL ONLY SHIP TO THE LOWER ... more48 STATES.
Sioux right angle p neumatic die grinder#5055A in very good working and cosmetic condition. Includes everything pictured. Questions are welcomed.
HEAVY DUTY PIECE.6-1/2' DISC. 3500 RPM, TESTED AND WORKS GREAT. ORIGINAL ARO DISC PAD.
Jack Wilkerson Industrial Surplus. LLC. Description You are bidding on one(1) used Cleco Pneumatic Vertical Grinder. 6.000 RPM. Condition Item is used; works fine. Guard not included. Shipping& Handling We ship with either USPS or FedEx Ground. Larger items are shipped via FedEx Ground. Buyer pays $21.42 shipping and handling(shipped in 48 States) We accept PayPal. We will combine shipping and reduce S&H charges in most cases. Items are usually shipped 1 business day(not including holidays and weekends) after you have paid for the item. Tax Louisiana residents will be charged a 4% sales tax. Please check out our store page to see what we have for sale id: 100020
This is a heavy duty Cleco grinder 6000 rpm. No major cosmetic issues cover was removed by me. All pieces are there. May have previous owner markings
LOT OF 2 CENTRAL PNEUMATIC AIR TOOLS 1/4' Inline Die Grinder Model 53177 3" High Speed Cut Off Tool Model 47077 comes with used saw blade Used Tools Fully tested& Completely functional Check out my! Be sure to add me to your!
If your looking at this auction then you know what these cost new! Hint: almost $400! Since I no longer need it today is your lucky day. The cleaning of my tool boxes continues so here is a used FLORIDA PNEUMATIC 5" air angle sander/grinder. It works excellent. Has tons of power and comes with a"Best Backers" 5" backing pad. I have used this pad with 5" 6" 7" and even a few 8" discs with no problems. The handle is reversible and there is a rubber grip included but I like using it withou the grip because I thought the handle is comfortable. Exhaust is out the front to blow the dust away from you and you can see what you are sanding or grinding. 1/4" NPT air fitting included also. There are no engravings on it and it is USA made! I'll even split the shipping cost with you and only charge you ... more$5.99 shipping for USPS PRIORITY INSURED to your front door. Where can you get a deal like this? This is Lot# K-161 which includes: 1) Florida Pneumatic air sander with handle and backing pad. USPS PRIORITY INSURED SHIPPING! NO FOREIGN SHIPPING. NO CANADA. 50 US STATES ONLY! Note on Shipping charges. As you know. USPS really hiked their rates recently. Also now, ebay charges 10% to the sellers of their shipping charge listed on the auction. Sellers DO NOT make money on shipping, we usually LOSE money, especially if you factor in the time and gas used to go mail the item. Inflation is real. Shipping charges are proof of that. It is what it is! If you are local feel free to pick the item up for free in 5 days with NO SHIPPING CHARGES. PLEASE CHECK OUT MY OTHER AUCTIONS AS I AM PLANNING TO PIECE OFF A COMPLETE MASTER A.S.E. MECHANICS SET.
Heavy duty grinders and polishers. Extremely well made. In good used. Usuable condition.Made in Fresno Ca. By may saw. The Rubber air wheels hold air I checked them.These are pretty cool. They also have the water drip copper lines for cooling both units. Theres is another nice grinding wheel that comes with it. I do not have the nut for mounting it. It is same size as the one in the photo that is mounted. Different grit. This is a nice set up. It will come with pulleys and belts. i have motors but I am sure shipping would not be feasible. If you wnat them ask me to ship them. Both run smooth and quiet, They do not have on off switches. Nice unitts shipping will be $40. West coast shipping will be more.Please ask questions prior to bidding. NOTE: If you are in the western portion of usa please do not pay until invoiced. Thank You
This listing is for a used vintage Dresser Industrial Tool Division pneumatic die grinder model DS-G250. The grinder is in good condition. But does have flaws. There are many marks, nicks, and scratches. There is a gouge around the tool, about 1/2 way down the handle. It has oil and soil in the crevasses. It runs strong and without issue. I don't have a key to get the grinding disc off. So it comes with a damaged one attached. Please look at the photos carefully. As they show the exact condition of this grinder. If you have any questions. Please send me a message. Good luck! We strive for 100% customer satisfaction! Please review our policies and procedures before bidding on an item! Shipping: All items are packed and shipped within 24 hours of received payment. Excluding Saturday and Sunday. We only ship to confirmed addresses. Due to ... morevarying shipping methods, not all items are eligible to be shipped to P.O. Boxes. Please contact us before bidding if your shipping address is a P.O. Box. International buyers: Please be sure to check the additional shipping and import fees to your specific location. We only ship to the lower 48(contiguous) states for domestic shipping. If you are in Hawaii. Alaska, or a U.S. territory, please contact us for shipping quotes. Payment: We only accept payments through PayPal and ask that all payments be made within 24 hours of the ending of the listing. Return Policy: We accept returns of merchandise within 14 days of receiving the item. Returned items are to have the return shipping payed by the buyer and are subject to a 20% restocking fee. If an item has been received not as described. Please send us a message so a solution can be worked out. Please note: Items sold as"New" that are in factory sealed packages are not returnable once they have been opened. Feedback: Feedback is left by us at regular intervals during the week. Please leave us feedback once you have received and inspected your purchase. If there is an issue with your purchase. Please contact us before l
This air grinder is in nice working conditionj. No damage except for some inor cosmetic wear from use. See all 9 photos.
Nice industrial grade Chicago Pneumatic 9113G die grinder. This is one of their higher end die grinders. 25.000 free rpm, 90psi, 8cfm avg, 32cfm full load. Be sure to check out my other items for more great tooling.
Fantastic estate find from a retired aircraft mechanic. Classic design and it still works! Should probably be oiled but is in good condition for its age. Does have normal wear and a place where the old owner put a serial number. Please look at photos as this is a used tool. These are VERY hard to find!
USED Gison GPW-215 wet grinder. Tool runs good but I can't seem to blow through the water line? Clogged? If you notice there is also some tape near handle of tool? Installed on tool is a hole saw that is clearly NO GOOD. Please ask questions before bidding. Thank you
You are looking at the die grinder described in the title. Works perfectly. Safety taken off trigger. Check out pictures for condition. Will combine shipping to get the greatest value. Not in this to make money on shipping. Check it out. See-close ups. See pictures. Note: you are bidding on pre-owned items. The best description possible is given. Ask questions before the auction ends and I will try my best to give you every detail or any specific information you may need. See Picture. Be sure to check all of our other lures. Reels, rods and other listed items. Shipping by Priority 2lb. International shipping by Priority 2lb. Be sure to check my other rods and reels. WILL COMBINE SHIPPING FOR SAVINGS. CA residents add 7% Item is being sold"as is" We never charge a handling fee and we ship our items well. We will gladly combine shipping ... morefor multiple winners. When buyer leaves feedback and is happy we will then leave feedback" If for some reason you feel this has not been worthy of a 5 star transaction please let us know so we can make it so. Thank you. On Mar-21-03 at 11:21:01 PST. Seller added the following information: After purchasing. Pay instantly with your credit card through PayPal!
Mac Tools angle air grinder. This Mac air tool works great and has been oiled regularly. It has some scuffs. Scratches and dings from use, please see all photos. It has an adjustable air flow and reversible handle for left and right handed. The grinder is 14 inches overall length and has the model sticker missing. Model number unknown. This is a nice professional tool ready to work and weighs about 5 pounds. Pictures of actual item you will receive. See pictures for a better idea of condition and contents included. Feel free to ask any questions. This item includes free shipping to the lower 48. Return policy is 14 days if any item is not described accurately by the written description or photographs. We deal mostly with vintage and used items. Quality items and fast shipping is our mantra.
Adjustable speed heavy duty pneumatic die grinder w carbide burr. Air hose& fitting As pictured
Used. Tested and working Ingersoll rand 31G45 extended air grinder a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-1480ef22539-0xf0-
Jet jsm-532 die grinder. 25.000 free rpm, 90psi. Used. You will receive one of the two different grinders pictured randomly selected. Both in similar shape. Just doing one listing for two like items. Combined shipping available. Be sure to check out my other items for more great tooling.
Chicago Pneumatic cp875 die grinder. 22.500 free rpm, 90psi. Used. You will receive one of the two different grinders pictured randomly selected. Both in similar shape. Just doing one listing for two like items. Combined shipping available. Be sure to check out my other items for more great tooling.
CLECO 600RPM PNEUMATIC AIR BUFFER GRINDER MODEL NO. 660 SA. FOR PART ONLY. THIS DOES NOT INCLUDE ANYTHING OTHER THAN WHAT YOU SEE IN PIC. GURANTEED TO WORK OR YOUR MONEY BACK.
Universal Pneumatic Tools 7 Inch Angle Grinder Sander Polisher Used in very good condition. Signs of wear. Scuffs& scratches. No chips, cracks or repairs. The rubber angle handle has a chunk of it that's ready to break off(see pics) The model number is not visible. This sander is 12" long and 4.75" tall. The handle is 4.25" long. It comes with a 4.5" grinding wheel and I think a RODAC dial air regulator. Tested 100% working. Runs strong and smooth. Weighs 5 lbs. 7 oz. What you see in the details of the pictures is what is included in this sale. My goal is for each transaction to be a good experience. I'm human& I occasionally make an honest mistake so if there’s a problem of any kind. PLEASE contact me so that we can work together to resolve the issue before starting a return. Leaving neutral or negative ... morefeedback. There's nothing we can't work out. I appreciate your purchase and every transaction should end with satisfaction. I’ll leave positive feedback for you once I know that you’re satisfied with the purchase. We really enjoy buying& selling great bargains with the wonderful people in the Ebay community.
THIS PENCIL GRINDER NEEDS REPAIR-DOES NOT SPIN AND LOSES AIR FROM THE HOSE CONNECTION-WE DO NOT REPAIR AIR TOOLS. ISSUE COULD BE MINOR BUT WE DO NOT KNOW-DOTCO MODEL 12R0400-18 PNEUMATIC PENCIL GRINDER-RPM: 60.000-THIS TOOL IS MILITARY SURPLUS AND HAS BLACK MARKER SPOTS COVERING A NUMBER THAT WAS REMOVED(cosmetic) COMES EXACTLY AS PICTURED-SELLING"AS IS" GREAT FIND
This auction is for a Used Mac TOOLS SDG225 HEAVY DUTY 3/8" DIE GRINDER pneumatic tool. A USED BUT IN VERY NICE CONDITION. ship to AK.HI,PR will pay extra cost. Thank you and happy bidding!
Chicago Pneumatic CP857 Air Grinder Used but in nice condition. Has some scrapes, but was not used much. Guard appears unused. This came to me with a seized bearing. I have replaced all 5 bearings with Japanese Nachi C3 bearings. The vanes are also new. Grinder has very good power. I have used these with 9" discs with no problem. Comes with wrench set. Disc adapters, and new 7" disc. No warranty or returns. Normal 0 false false false EN-US X-NONE X-NONE PLEASE READ OUR POLICIES Not reading is no excuse If the title line of this auction states“Free Shipping with Buy It Now! And you buy the item with Buy It Now. Shipping charges will still appear at checkout, we will refund them via Paypal. If we forget, slap" us with an E-mail! When the first auction-style bid is entered on an item. The Buy It Now option is no longer available ... moreto any bidder. If you don't want to risk losing an item to another bidder, then Buy It Now! If you are bidding from Hawaii. Alaska, or Puerto Rico please be aware that you will still pay a reduced shipping fee on heavy items even with free shipping. If you are an International bidder. Even with our“Free Shipping with Buy It Now! you will still pay the shipping cost from our coast to you, we as sellers in the U.S. do not have any control over that leg of your items trip. That shipping fee is paid to another shipper that is unknown to us and is not participating in our Free Shipping with Buy It Now! option. Since Ebay has made the feedback system practically worthless. We do not post feedback until we have received feedback. Since Ebay has changed the feedback system, we have noticed an increase in auction winners waiting up to 6-7 days or more before paying, with no e-mail response. If you don’t intend to pay, or monitor the auction you entered a bid on, please don’t bid. If no contact or payment has been received within 7 days. We will open a non-paying bidder case with Ebay, and relist the item. We reserve the right to change shipping methods and shippers other th
Sioux 1/4 pneumatic die grinder in very good pre-owned condition. Model 5054A 22.000 rpm. Comes with 2 new trees. Questions are welcomed.
SquareTrade © AP6.0 ATLAS COPCO GRINDER ~ POLISHER LSS 53 S060 THIS IS FOR A GRINDER WE PURCHASED AT A LOCAL SALE. IT IS UNTESTED. PLEASE VIEW PHOTOS WITH THE ZOOM FEATURE IN ORDER TO SEE CLOSEUP. IF THERE ARE ANY QUESTIONS. PLEASE EMAIL! We normally ship larger items UPS and insurance is included. Free shipping is for lower 48 states only. We ask for payment within 3 days and we normally ship same day. Or at the latest next business day. Thank you for your interest in our item. We always discount shipping charges for multiple purchases. Whether from our store or on our on-line auctions! Check out my other items! Be sure to add me to your favorites list!
This is a used Dotco high volume pneumatic router. That is in working condition. This router has a very strong motor It is used and does show some wear use signs. This is an 18,000 rpm. Please see the photos for further details. Paypal payments accepted. Payment due within 4 days of auction ending. Unless othwise requested! Ebays Unpaid item Assist will automatically open a case after 14 days. To avoid this. Pay or cancel your purchase before UPI closes the case. Ships out Fast. Usaully within 1 business day- I insure all Items over $100- We do combine shipping upon request. Must request before payment! If requested after payment only partial refund ddo to ebay charging on shipping fees! ALL SALES ARE FINAL. UNLESS THERE WAS A PROBLEM WITH THE WAY THE ITEM WAS LISTED OR DESCRIBED. 14 day money back return policy. If your happy with your purchase ... moreplease leave a 5-star feedback or Contact us to Resolve any Issues. WE HAVE BEEN SELLING ON EBAY FOR MANY YEARS. THIS IS A NEW ACCOUNT FOR US! WE STRIVE TO DESCRIBE EVERYTHING AS ACCURATE AS POSSIBLE. MOST ITEMS ARE USED, UNLESS OTHER WISE STATED. IF THERE IS A PROBLEM PLEASE CONTACT US FIRST BEFORE LEAVING FEEDBACK! WE WOULD LOVE TO RESOLVE THE PROBLEM FIRST! THANK YOU! LONG TIME eBAY SELLER. WITH KNOWLEDGE OF CUSTOMER SACTISFACTION! STARTING A NEW VENTURE WITH A NEW ACCOUNT! DOING THE BEST WE CAN TO PROVIDE QUILITY USED TOOLS, AND ANYTHING ELSE WE CAN FIND, TO NEW OWNERS! The Best way to contact us is through eBay Messages with any questions or concerns.
Chicago Pneumatic air operated 100mm 4" angle grinder. In well used condition but works fine. Pick up is welcome. Thanks for looking. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-14838e2af0f-0x118-
CENTRAL PNEUMATIC AIR PENCIL GRINDER GENERAL USA. IN OK SHAPE WORKS GOOD. PLEASE LOOK AT THE PICS FOR MORE INFO AND COND. I TRY TO DESCRIBE ALL OF OUR ITEMS AS ACURATELY AS POSSIBLE. ALL OUR ITEM ARE SOLD AS USED UNLESS STATED OTHERWISE.EVERYONES OPINION OF CONDITION IS DIFFERENT SO PLEASE TAKE A LOOK AT THE PICTURES AND DECIDE FOR YOURSELF. BEFORE YOU OPEN A EBAY CASE. PLEASE EMAIL, LET WORK IT OUT, ITS QUICKER AND BETTER. I DO NOT APPRECIATE NEGATIVE FEEDBACK ALL HAS A SOLUTION! WE CAN ALWAYS WORK SOMETHING OUT. I ACCEPT PAYPAL- PAYPAL CONFIRMED ADDRESS PREFERRED- I SHIP EVERY MONDAY. WEDNEDAY AND FRIDAY OF THE WEEK,SO PLEASE BE PATIENT YOUR ITEM WILL BE SHIPPED AS SOON AS POSSIBLE- SORRY NO INTERNATIONAL TRANSACTIONS ALSO NO SHIPPING LARGE ITEM TO P.O. BOXES, ALASKA,HAWAII APO or FPO.WILL ONLY SHIP TO THE LOWER 48 STATES.
Chicago Pneumatic CAT PNEUMATIC DIE GRINDER MODEL 9114 12000 RATED RPM Used. Tested and working Pneumatic die grinder Model#9114. Please see photos. Thank you for looking. Please see our other items for sale.
This is used and working well Chicago Pneumatic CP heavy duty grinder. it has scratches and scuffs. it is missing front ring- but doesn't effect the performance. You will receive exactly what you see in the pictures(grinder and grinding bit) Thank you for looking! From the Manufacturer The CP860 Heavy Duty Die Grinder is our most powerful straight die grinder which features a large 1/2 HP motor. It is extremely durable and offers more power and a longer life compared to its nearest competitor. A heavy duty tool designed for porting. Weld grinding, and breaking sharp edges. Customers who buy this tool are looking for industrial quality. Built-in regulator matches speed to job. Rear exhaust directs air away from work. Complete with 1/4-Inch and 6mm collet. Free speed: 24,000 rpm; air consumption: 5.25 CFM; Air inlet thread: 1/4-Inch NPTF; ... moreminimum hose size: 3/8 in. sound dBA pressure: 93; length: 5.75; weight: 1.25 lb. Product Description CPT860 Features: Adjustable power regulator for precise control.Lock off throttle to prevent accidental start ups.Square handle design for positive grip.Heavy Duty Air Die Grinder. Specifications: Rugged. Energy-efficient 1/2 hp motor. Dimensions: Excellent for cleaning tire moldings, porting and relieving engines, and general high-speed polishing and grindingBuilt-in regulator matches speed to job. Rear exhaust directs air away from work. Complete with 1/4" and 6mm collet. Free speed: 24,000 rpm; air consumption: 5.25 CFM; Air inlet thread: 1/4" NPTF; minimum hose size: 3/8 in. sound dBA pressure: 93; length: 5.75; weight: 1.25 lb. Part Number, CP-CP-860, Item Weight, 8 ounces, Product Dimensions, 7.9 x 4 x 2.5 inches, Item model number, CP860, Power Source, air-powered, Item Package Quantity, 1,
Starlite Air Powered Grinder 60.000 RPM 1/8" Collect Up for bid is this used Starlite grinder. This item is in a good used condition. Working great. VIEW OUR OTHER AUCTIONS FOR MORE GREAT DEALS* Please review all attached photos. Descriptions, and shipping charges in this auction to gather a better understanding of this listing prior to bidding. However, when you place a bid, you are in contract(agreement) stating you are purchasing this item. All items are used unless stated otherwise and are sold as-is. If you have any questions please ask prior to placing a bid to help protect both the buyer and seller from any misunderstandings and product information as we will answer ASAP. We currently DO NOT ship internationally. Check some of our current listings and save on shipping. Save our seller name to check our future listings to save ... moreeven more money. Thank You for viewing and Happy Bidding! 800x600 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Payment Information: At this time. We are only accepting PayPal as a payment method for items that must be shipped. We will accept cash on pickup for those who wish to pick their items up from our Waterford. Michigan location. However, these sales are still subject to a 6% MI sales tax. No other forms of payment are acceptable. Please pay for your item within 7 days of auction end. INTERNATIONAL BUYERS/PURCHASES: At this time. We are currently not shipping anything outside the 50 United States. Sorry for any inconvenience this may have caused. Striving For Five: Our mission is to serve our customers to the best of our ability. Providing quality service in an effort to satisfy each and every customer. Please contact us before sending negative feedback. We strive for 5 Star-Service and ask that you give us a chance to address your concerns before providing feedback. Thank You! We describe each item to the best of our ability. If you feel we have failed in this effort. Please contact us with your concerns. We strive for excellent communic
This auction is for an Ingersoll Rand Heavy Duty 7" Pneumatic Air Grinder(See PICS Below) 6000 RPM 90 PSIG/ 6.2 Bar Max. It comes with 3 stone grinder wheels. Weighs approx. 10 lb.
You are bidding on a Taylor Pneumatic air powered screwdriver model number T-7763. Also included is a Taylor Pneumatic air powered 1/4" die grinder model T-7758R. Both have 1/4" air chucks attached. Have very little use and are in great condition. Accesories include the following. 5 carbide deburring tools. Two of which are brand new. 1 wire brush. 2 sanding drum arbors. 5 new sanding drums. All pictured above. NO RESERVE PRICE. All sales are final and will only ship within the USA. Thank you! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B4g7%3E-14853310435-0x10b-
Die grinder is made by Chicago Pneumatics rated at 24000 rpm's at 90 psi. The 90 degree drill is mad by Pan American tool co. Nova system 2800 rpm. Both are in excellent condition. The oiler can be used for both tools.
CLECO VERTICAL GRINDER AIR 90 PSIG/ 6.2 BAR MAX 4" 11500 RPM 0.4 HP# 136VGL-115 MADE IN U.S.A. RETAILS FOR $778
Dotco 10L1003A 36 Grinder Air Tool Pneumatic 25000 RPM. Dotco 10L1003A 36 Grinder Air Tool Pneumatic 25000 RPM. This item was found in an abandoned storage unit here in Cleveland. Ohio. This item is in used condition with wear as seen in pictures Please view pictures to see condition of the item. No reserves on auctions. Please check out my other listings for more great items! Thanks for viewing our auction! Please add us as a favorite seller and subcribe to our newsletter! We post new auction often and have a great variety of collectible merchandise and other odds and ends that we typically start at really low prices. We buy abandon storage units and make the treasures we find available to you for low prices! We prefer the auction format with low starting prices so you can find some really great deals here! Hope to see you again soon! For ... moremore great items! 2nd Cents only accepts PayPal for eBay transactions. All payments are expected with 2 business days of a completed auction. If you can not complete payment within 48 hours of a completed auction. Please send us a message on when you will be making your payment. If you have any problems please contact us. Please read the Shipping Details for each auction! We ship using a variety of different size& weight items and use various shipping methods to get your package to you safely and at the lowest cost. Most Buy-It-Now items have free shipping. We may use calculated shipping for extremly heavy items. The majority of our auctions use calculated shipping. Shipping in the US is through the USPS or UPS. Light auction items shipping via First Class Mail will be charged a flat fee of $3 or $4 depending on weight and packaging. We are always willing to arrange for local pickup if you are near the Cleveland Area. We are always willing to combine shipping on multiple items based on weight and size! Some large or fragile items may not be able to be combined. Please send us a message for an estimate. We will only ship via international mail under special circumstances and
Blue-Point AT105 Air Pneumatic Die Grinder 1/4" Collet 22.000 RPM includes: die grinder in good looking condition. in good working condition. normal signs of wear and use unit has cosmetic(view pics) MB" engraved on unit(view pics) fully functional. overall in good condition. Please view pics to see exactly what you get. Please view pics on condition. Please don't hesitate to ask any questions. Payment is due within two days after auction ending. Serious buyers only. Thank you for looking. Posted with
DESCRIPTION: USED.DOTCO DRILL. I HOOKED IT UP TO AIR AND IT RAN WITHOUT LEAKS. I DO NOT HAVE ANY BITS FOR IT. THE HEAD IS THREADED. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT ... moreFOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMAT
Vintage 7" ARO? Pneumatic Air Disc Sander Grinder Polisher For Parts Selling With No Reserve! Hi! I have for Auction here a vintage 7" Air Disc Sander. I believe it is ARO Brand but not positive. It does turn a little when plugged in but leaks air through so it needs repair. The disc is cracked. It has scuffs. Marks, etc. See Pictures. Get yourself a great deal here. Local pick-up is always welcome. But I require cash payment or there will be a $25 fee or 10% whichever is greater! I will combine shipping if you buy multiple items. But I can't send the combined invoice until Monday afternoon. Do not pay for the items before you recieve the combined invoice. I will not refund any money after items are paid. For more information you can call Steve at: 989-802-9508. Please feel free to contact me if you have any questions! Thanks ... morefor looking and Happy Bidding! Payment is expected within 5 days. We appreciate your prompt payment. We accept payment thru Pay-pal. Cash for pick-up items.please contact us for details or if you have questions. Steve Lehman 989-802-9508 Standard Shipping: Our items are shipped U.S. Postal Service or Fedex. We try to combine shipping on multiple purchases whenever possible. Please contact us before payment if you are the buyer of multiple items and we will see that you get the best rate possible. Freight Shipping: Large items(over 150lbs) will be palletized and shipped Truck Freight. Local Pick-up is always welcome! Please note that I will hold paid items for up to 30 days. After 30 days. Any items not claimed will be considered abandoned. Most of the Items that we sell are used. Unless otherwise specified. We do our best to describe our products as accurately as possible. If you feel that we have misrepresented an item that you have bought, please contact us before leaving feedback and we will do what we can to work with you. We do our best to deal with each Customer with Honesty and Integrity and strive to complete each transaction to your satisfaction. All our Items are sold
ARO Elite GVG21A GVG21 GVG21A-06G-7 6000 RPM Air Pneumatic Grinder. Used for 2 jobs in excellent running condition.
Dotco Pneumatic Precision Grinder 10L2562C Description- Model: 10L2562C- Manufacturer: Dotco- Used to grind a very precise area where standard pistol grip tools are inaccessible. Rotations per Minute: 12000- Grinding attachment is protected by metal shroud to increase functional life. 9983(NRN) 09/12/2014 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact ... moreus and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dimensional restrictions
PNEUMATIC RIGHT ANGLE GRINDER AIR TOOL aquavations hydro-glide model HG-6 Good and working condition. TESTED. RARE
Asatro Pneumatic# T210 1/4" Medium Air Die Grinder with safety lever has attachment for grinder wheel and tools and male nipple for air hose. Used but in good shape and works good.
Thank you so much for visiting buyandsellall2010! Please READ this item’s description. Our terms and conditions, and return policy entirely BEFORE making your purchase. Our goal is to provide you with excellent customer service and complete satisfaction. ASTRO PNEUMATIC 1/4" AIR DIE GRINDER AR-210 T USED; SHOWS SIGNS OF USE; WORKING CONDITION WITH GRINDING DISC ITEM COMES AS LISTED. AS DESCRIBED, AS PICTURED. THE PHOTOGRAPHED ITEM IS THE ACTUAL ITEM YOU WILL RECEIVE. YOU MAY ALSO CHECK OUT MY OTHER LISTINGS& SAVE ME AS A SELLER. I HAVE ALL TYPES OF ITEMS THAT MAY INTEREST YOU. We strive and work diligently for CUSTOMER SATISFACTION. We desire for you to be happy with your purchase. That you may ultimately be a repeat customer. COMMUNICATION IS KEY. If you are not 100% satisfied with your item(s) Please contact us immediately via ... morethe Ebay messaging system prior to leaving any neutral or negative feedback. We work hard for each and every customer to earn a 5 star rating in every category. Thank you in advance for giving us your 5 star rating! Terms and Conditions: Your item(s) will be packaged and ready for shipping upon receipt of your payment through Paypal. Prompt payment will help speed up the shipping process. Combined shipping is available on certain items- make sure to contact us if this is desired. Please ensure that the shipping address is correct when submitting payment. Changes cannot be made after order has been processed. At this time. We cannot ship internationally(outside the continental United States) or to Alaska, Hawaii, Puerto Rico, Guam, the Virgin Islands, APO/FPO/DRO addresses. Also we DO NOT OFFER local pick-up. We apologize for any inconvenience this may cause. Shipping time may be 3-5 business days or sooner from date payment is cleared in Paypal(this excludes Saturdays. Sundays, and holidays) Return Policy: BUYANDSELLALL2010 strives for customer satisfaction. We desire for you to be happy with your purchase that you may ultimately be a repeat customer. Communication
St. Louis Pneumatic SLP-83025 Grinder- Tested& Oiled Used. Stored by US Military. Has normal wear from normal use. Has USMC markings/engravings. Great working condition. Tested and Oiled. See photos for details.
CENTRAL PNEUMATIC 15 PIECE AIR DIE GRINDER KIT WITH CASE This air die grinder kit offers endless possibilities in one lightweight. Compact package. Choose an accessory for the die grinder and tackle projects including weld breaking, smoothing sharp edges, deburring, polishing and grinding! Featuring a trigger lever with a safety latch, this air die grinder was designed for top-notch utility and performance. Compact. Lightweight die cast aluminum housing-Paddle trigger with safety-Rear exhaust Specifications Name: Air Die Grinder Kit SKU: 44716 Brand: Central Pneumatic Average air consumption: 4 CFM@ 90 PSI Exhaust location: Rear Maximum speed(rpm) 22.000 RPM Working pressure(psi) 90 PSI Air inlet size: 1/4 in. 18 NPT Collet size(in. 1/4 in. 1/8 in. Recommended hose size(in. 3/8 in. Shipping Weight: 2.31 lb. Accessories Included: 1/4 in. and ... more1/8 in. collets- 10 grinding wheels- 2 Wrenches- carrying case
Dynabrade Dynablaster 11475 Used Condition See Pictures 14 Day Money back Guarantee Local Pickup Available In Springfield MO 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-1488d785223-0x111-