|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$8.55 Shipping Condition: Used Location: San Antonio, United States Excellent Condition Dotco 90 Degree Angle Drill. 6,200 Rpms. All inventory is US. 1/4-28 Threaded. I watch them scan your stuff. Zero wobble.
Buy It Now
$11.84 Shipping Condition: Used Location: Reedley, United States Sioux Drill 1/4 Non-Reversible Pneumatic Drill / 2600RPM. Condition is Used. Shipped with USPS Ground Advantage.
Buy It Now
$13.60 Shipping Condition: Used Location: Circle Pines, United States Made in the United States, this drill has been previously used but is still in great working condition.
Buy It Now
$9.99 Shipping Condition: Used Location: Schofield, United States If the item is used, any and all flaws will be shown in the detailed pictures.
Buy It Now
Free Shipping Condition: New Location: United States No-load Speed: 1700rpm. Reversible rotation switch is convenient and practical, with high sensitivity. This human-centered designed drill is flexible ... moreand convenient for hand-held operation. It will help you to achieve high efficiency and high precision drilling.
Buy It Now
Free Shipping Condition: Used Location: Ventura, United States Model: H4822. MPN: H4822. We're down to earth, easy to work with people. Fast Dispatch Service.
Buy It Now
Free Shipping Condition: Used Location: Turlock, United States It may or may not include the original box. Family owned and operated since 2016. MID VALLEY PAWN is located in Turlock CA.
Buy It Now
$22.95 Shipping Condition: Used Location: Farmington, United States Chicago Pneumatic CP785H 1/2" Pneumatic Air Drill 0.5 HP 500 RPM TESTED WORKING [A10FL] #16. Chicago Pneumatic CP785H 1/2" Pneumatic Air Drill | 0.5 HP ... more| 500 RPM | 11.3 (ft-lb) Stall Torque. TESTED WORKING.
Buy It Now
Free Shipping Condition: Used Location: Ventura, United States We're down to earth, easy to work with people. Fast Dispatch Service.
Buy It Now
Free Shipping Condition: Used Location: San Marino, United States For sale is a Cleco 135DPV-14B-50 Pneumatic Drill. See photos for condition.
Buy It Now
$10.00 Shipping Condition: Used Location: Crestview, United States Nice US Industrial 90 degree angle drill. 1/4-28 threaded and runs straight and true
Buy It Now
$10.00 Shipping Condition: Used Location: Jacksonville, United States Tool is in good used condition.
Buy It Now
Free Shipping Condition: Used Location: Liberty, United States It works as it should. Chuck is marked Jacob Multi-Craft.
Buy It Now
$15.58 Shipping Condition: New – Open box Location: San Diego, United States Built to a higher level of quality, TheSioux Tools SDR10S20R2 Straight Drill is built a step above the standard. Speed Range: 300 rpm - 21,000 rpm. Chuck ... moreCapacity: 1/4" (6 mm) - 1/2" (13 mm).
Buy It Now
$17.80 Shipping Condition: Used Location: Circle Pines, United States Whether you are looking for a tool for personal use or for use in a professional setting, this product is the perfect choice. AS IS ARO 4-24-15A. / ARO4-24-15B.
Buy It Now
$8.55 Shipping Condition: Used Location: San Antonio, United States Rockwell 750 RPM Drill Motor With 1 Year Warranty 750 rpm Includes 3/8" Key Chuck Can also be used with any standard 3/8"24 jaw type threaded ... morechuck 1 year warranty against defects Rated at 90 PSI Tested for proper operation Chuck Key Included These motors are still good for years of excellent service Surplussed from a working environment in a major aircraft manufacturer. Drills may have markings. Condition of paint if any will vary. Rockwell Model 31D106 750 RPM drill motor has been thoroughly cleaned. Lubricated. Parts replaced as necessary and checked for smooth operation. See my for drill bits for these motors. This is a typical picture. Your drill may look slightly different. For maximum shipping savings on multiple orders. Please request an invoice for correct shipping charges before paying. Quick Reference Guide to Store Categories. Click Title to go to Category
Buy It Now
$8.55 Shipping Condition: Used Location: San Antonio, United States Excellent Condition Jet Heavy Duty pneumatic Drill. I watch them scan your stuff. All inventory is US. No Reserve . (Check out the pictures for more Info).
Buy It Now
$9.00 Shipping Condition: Used Location: Westerville, United States For sale is a used Buckeye Cooper 90 degree air angle drill. The model number is 21A-633. The head is collet style 1/4". The drill runs strong with no ... moreissues. These are military surplus tools and may have markings/wear on them as shown.
Buy It Now
$7.15 Shipping Condition: Used Location: Pittsburgh, United States D-K Division Vtg Pneumatic Air Drill 5130 LA 22 Caliber Chuck Key See Condition
Buy It Now
$15.55 Shipping Condition: New Location: Blairsville, United States The SIOUX Signature Series Palm Drills have been tested for over two years and offer the most Horse Power and Torque in a Palm Drill They replace old ... more1410/1412 series Sioux Palm Drills which had a 1/3 horse power motor . These drills are great for the Truck and Trailer Body Industry as well as Sheet Metal Fabrication and Aerospace .0.5 hp Dual Chamber Motor High Torque Precision Spindle & Chuck: ±0.0025 Runout 3 Planet Gear-Set – Longer Life Ergonomic Features: Integrated Finger Rest - Full Length Grip High Control Trigger Drop-In Motors – Ease of Service Rand new in the box!
Buy It Now
$9.98 Shipping Condition: Used Location: Wooster, United States Awesome tool with plenty of life left! Please note torn grip as pictured.
Buy It Now
$9.50 Shipping Condition: Used Location: San Antonio, United States This Chicago Pneumatic palm drill boasts a powerful 5000 RPMs and features a 1/4 Jacob's chuck, making it a versatile tool for a variety of air tool applications. ... moreThe brand's reputation for quality and durability is evident in the design and performance of this drill, which is perfect for use in the business and industrial sector.Ideal for use in pneumatic drilling applications, this Chicago Pneumatic palm drill is a reliable and efficient tool for any workshop or job site. With its high RPMs and sturdy build, it is capable of handling even the toughest jobs with ease. Whether you are a professional in the field or a DIY enthusiast, this drill is a must-have for anyone looking for a top-of-the-line air tool.
Buy It Now
$9.00 Shipping Condition: Used Location: Westerville, United States For sale is a used Ingersoll Rand pistol grip Pneumatic drill with 1/4" chuck. The model number is 6AL1. The drill runs strong with no leaks. These are ... moremilitary surplus tools and may have markings/wear on them as shown.
Buy It Now
$4.87 Shipping Condition: Used Location: Hastings, United States This Ingersoll Rand Pistol Grip Drill boasts a powerful 4500 Rpm's and a 3/8 inch chuck for versatile drilling capabilities. Made in the United States, ... morethis drill is trusted by professionals in the Business & Industrial industry. It's perfect for use with air tools, specifically pneumatic drills. The brand Ingersoll Rand is synonymous with quality, making this drill a reliable choice for any job. The model 5aj1 is a popular choice among professionals and hobbyists alike. Add this tool to your collection today and experience the power and precision of Ingersoll Rand.
Buy It Now
$11.00 Shipping Condition: Used Location: Westerville, United States For sale is a used Sioux pneumatic/Air Angle Drill. 45 Degree. The model number is 2A1410-45. The only issue is the trigger is missing. You can use your ... morefinger to push the button in. The drill is in good working condition and ready to use.
Buy It Now
$12.54 Shipping Condition: Used Location: San Antonio, United States Item Condition: Item is used and may show general signs of wear from normal use.
Buy It Now
Free Shipping Condition: New – Open box Location: Piedmont, United States Dotco PL31-14CF Pistol Grip Pneumatic Drill 600 RPM 3/8 Jacobs Chuck
Buy It Now
$14.99 Shipping Condition: Used Location: Halstead, United States Up for auction today is an old Kett Tool Co. KU5 all angle drill. With a Buckeye Ace Buckeye Portable Tool Co. handle. The tool is untested. But spins ... morefine and is really clean, so I can’t imagine there’d be any issue. It adjusts to whatever angle you’d like with an allen wrench. Not sure how the bit gets placed. As the chuck doesn’t pull up or down. It has some holes in the top and a notch on it for a wrench possibly. Please see photos to best determine condition and ask any questions you may have. Winning bidder agrees to pay 8.20 for shipping and handling which includes USPS tracking and insurance. NEVER A RESERVE Please read information below before bidding. I thank you for viewing my item and good luck with your bid. My aim is to always fairly represent the item’s condition and what the item is. I will do this by providing a description and pictures to the best of my ability. The pictures are an important part of the description so please look carefully. If you have information about this item in contrary to what I stated please let me know and I will correct it. If I have one. I will state the history of the item as conveyed to me. Since all the items I sell were purchased used and may have had many owners, I will never know all the history as far as the environment they were kept in. The items I sell are vintage or older and normal wear is to be expected. And will often enhance its beauty and value. Communication and understanding is essential to ensure a mutually satisfying transaction. So please e-mail me for any clarification of description needed or more photos. All items are sold as is with no returns. Please be certain of what you are bidding on before you bid. Please look at my feedback and know you can bid with confidence. Payment is expected with PayPal within 5 days of auction close. If payment is not received within this period. You will forfeit the item to the backup bidder unless we make other arrangements. All items will be shipped within 3 business days of receipt of payment. Unless other ar
Buy It Now
$15.70 Shipping Condition: Used Location: Turner, United States no brand or model number markings
Buy It Now
Free Shipping Condition: New Location: Minooka, United States CHICAGO PNEUMATIC CP9287C. Hose Size 3/8 in, Handle Material Rubber, Variable Speed Yes, Throttle Type Trigger, Bearings Ball, Housing Material Composite, ... moreGear Train Planetary, Overall Length 8 1/4 in, Tool Weight 2.4 lb.
Buy It Now
Free Shipping Condition: New Location: Minooka, United States CHICAGO PNEUMATIC CP9790C. Hose Size 3/8 in, Handle Material Rubber, Variable Speed Yes, Throttle Type Trigger, Bearings Ball, Housing Material Composite, ... moreGear Train Planetary, Overall Length 9 1/4 in, Tool Weight 2.4 lb.
Buy It Now
Free Shipping Condition: Used Location: Rexburg, United States ARO 8255-A14-1 Pneumatic Self Feeding Drill. This is a working unit in good condition.
Buy It Now
Free Shipping Condition: Used Location: Port Sanilac, United States
Buy It Now
Free Shipping Condition: Used Location: Ventura, United States Sears Craftsman Pneumatic Air Drive 3/8" Drill- Model 875.188950/ Part#918895 Appears to be new in box old stock- Not sure? So it is listed as"New ... moreOther" Includes: Drill. Chuck, Chuck Key and Instructions This medium duty drill is Ideal for drilling fiberglass. Sheet petal and wood in home and shop workshop applications. Can also be used as a direct stall-type screwdriver. Features: Positive action switch controls speed Compact pistol grip design High Quality 3/8 inch capacity removable Jacobs chuck. Ball and roller bearings for long life, Steel gear case for durability and strength. Exhaust in handle directs dust and noise away from operator 2200 rpm(no-load speed) Average working CFM: 40 at 90psi with a 3/8" air hose and 12 gallon air tank.
Buy It Now
$11.99 Shipping Condition: Used Location: Topeka, United States Ingersoll rand 3/8” reversible chuckless pneumatic air drill. Used and fully functional. Message if you have any questions :)
Buy It Now
$12.54 Shipping Condition: Used Location: San Antonio, United States Item Condition: Item is used and may show general signs of wear from normal use.
Buy It Now
$14.50 Shipping Condition: Used Location: Fountain City, United States You are bidding on a used Rotor Tools of Cleveland Ohio Model S1 air tool. I think it is some type of air chisel. When you put pressure on the end it ... morebegins to vibrate. It is in used working condition with a rubber gasket type at one end showing wear. Looks like you can change bits on it. Please view photos for condition. Buyer to pay USPS Ground Advantage or UPS Ground shipping. I have other machinist's hand air tools listed and will combine shipping. Please email questions and thanks for looking at my auction.
Buy It Now
Free Shipping Condition: New Location: United States 1 Pneumatic Drill. It is convenient to adjust the speed freely. 1 Chunk Key. No-load Speed: 700rpm. If you do not receive our reply within 48 hours, pls. ... moreIf you are satisfied with our service, pls.
Buy It Now
$12.00 Shipping Condition: Used Location: Saint Cloud, United States works as intended
Buy It Now
$24.05 Shipping Condition: Used Location: Turner, United States good condition
Buy It Now
$9.00 Shipping Condition: Used Location: Westerville, United States For sale is a used (ARO) Ingersoll Rand Reversible pistol grip Pneumatic drill with 1/4" chuck. The model number is DG022B-26. The drill runs strong with ... moreno leaks. These are military surplus tools and may have markings/wear on them as shown.
$15.00 Shipping Condition: For parts or not working Location: Elberta, United States Untested bought it in a lot, sold as is for parts
Buy It Now
$18.75 Shipping Condition: Used Location: Toano, United States You are bidding on a Rebuilt Pneumatic Air Chipping Hammer + 2 Chisels Model: APT-653H Blows per Minute: 1650 Stroke: 3" Bore: 1 1/8" Shank ... moreDiameter: 580 Hex Length: 15 1/4" Tool Weight: 15lb Air Inlet Thread: 3/8" CFM: 33-35 This Chipping Hammer comes with two Chisels! 2 Wide Flat Chisels
Buy It Now
Free Shipping Condition: Seller refurbished Location: Encino, United States This used Ingersoll Rand (ARO) pneumatic angle drill is a versatile tool designed for use in aircraft maintenance and repair. Whether you're working on ... moreremoving rivets or drilling through tough materials, this angle drill is an essential tool for your aircraft toolkit.
Buy It Now
Free Shipping Condition: Used Location: El Monte, United States Used, in good working condition.
Buy It Now
$22.95 Shipping Condition: Used Location: Fayetteville, United States Please see pictures for details. This is for a very rare Pneumatic drill that has been tested. To operate you must press the bit against the object to ... moreinitiate the drill mechanism. I do not have specs on the drill as this drill is over 80 years old to know if working as new. Very unique design for using triggers on top for forward and reverse. Please keep in mind these older drills need oiling if not use to them. Could be used as a display piece for art. Drill weighs just over 4 pounds.
Buy It Now
Free Shipping Condition: Used Location: Missoula, United States NO AIR FITTING INCLUDED. It may or may not include the original box.
Buy It Now
Free Shipping Condition: Used Location: Clearwater, United States Air Drill UD-60-29 URYUSEISAKU 2900 RPM.
Buy It Now
Free Shipping Condition: Used Location: Los Angeles, United States American Pneumatic Tool Model D2 Drill - 20000 RPM Condition: Used/Untested Quantity: 1 FAST SHIPPING!! Thank you for your business and have a great day!
Buy It Now
$12.54 Shipping Condition: Used Location: San Antonio, United States Item Condition: Item is used and may show general signs of wear from normal use.
Buy It Now
Free Shipping Condition: Used Location: Uvalde, United States For sale one Tamco Brand Pneumatic Rock Drill Model TJ-15. Auction only includes Rock Drill Model TJ-15 nothing more. Rock Drill is in very good looking ... morecondition as seen in pics. Tool is in correct working condition. Drill is 30lb in weight. Shipping is $30.00 only for 48 Mainland USA States. Auction comes with a 14 day warranty minus any shipping fees to send back. Paypal payment only. Thank you.
Buy It Now
$8.00 Shipping Condition: Used Location: Orlando, United States This auction is for a used Chicago Pneumatic CP-884 Air Drill. It’s rated at 2800 rpm@ 90 psi max. I did lube it(air tool oil) and tried it out. Worked ... morefine; in good condition. The chuck is 3/8 inch. NOTE: It does not include the chuck key, yet they’re easily found at most larger hardware stores. It measures approx. 5 ½ inches tall and 7 ½ inches long. Please contact seller with any questions prior to bidding. Thank you for looking. Shipping is based on a weight of 3 pounds once boxed. Those who do not know their address or do not keep the proper one on file at Ebay/ Paypal will be charged all return and resend postage costs. I accept Paypal with payment due within one week of auction close. Please feel free to contact me with additional questions prior to your bidding. I take pride in my 100% positive feedback rating and encourage communications to help maintain it. I’d appreciate your positive feedback and it also let’s me know you’ve received the item without any problems. If you have any problems with your purchase please contact me as soon as possible. I leave feedback after I know that the item has been received. This typically means the buyer has left feedback. 6-28-14
Buy It Now
Free Shipping Condition: Used Location: Aiken, United States IR Ingersoll Rand Air Pneumatic Pistol Drill 6ARST6 500 Rpm
Buy It Now
$13.00 Shipping Condition: Used Location: Coffeyville, United States PNEUMATIC AIR DRILL. ITEM LENGTH: 4-1/2".
Buy It Now
Free Shipping Condition: New Location: United States No-load Speed: 1700rpm. Reversible rotation switch is convenient and practical, with high sensitivity. This human-centered designed drill is flexible ... moreand convenient for hand-held operation. It will help you to achieve high efficiency and high precision drilling.
Buy It Now
$15.55 Shipping Condition: Used Location: Dothan, United States This Sioux Pistol Grip Pneumatic Air Drill is an essential tool for any aviation mechanic or DIY enthusiast. Its high-quality construction and reliable ... moreperformance make it an excellent addition to your tool collection. With its ergonomic design and comfortable grip, this drill will help you tackle any drilling task with ease. The drill's powerful motor and precision engineering ensure that you can get the job done quickly and efficiently, no matter what the task at hand.
Buy It Now
$9.00 Shipping Condition: Used Location: Westerville, United States For sale is a used Sioux Pneumatic Pistol grip drill with 5/16" chuck. The part number is 1452. The drill runs strong with no leaks. These are military ... moresurplus tools and may have markings/wear on them as shown.
Buy It Now
$8.99 Shipping Condition: Used Location: San Antonio, United States Dotco Drill. - Rohm 3/8" Chuck with key. - Heavy Duty. - Tested and runs great. - Good condition.
Buy It Now
Free Shipping Condition: Used Location: Mountain Home, United States Chuck: 3/8". 0.5 HP Motor for extra stall resistance. Exhaust: Rear. Motor (hp): 0.5. Motor (Kw): 0.37. Speed (rpm): 1,800. Air Inlet (npt): 1/4". Weight: ... more2.5lbs/1.1kg.
Buy It Now
Free Shipping Condition: New Location: Minooka, United States CHICAGO PNEUMATIC CP887C. Drill,Air-Powered,Pistol Grip,3/8 in. Hose Size 3/8 in, Handle Material Rubber, Variable Speed No, Throttle Type Lever, Bearings ... moreBall, Housing Material Composite, Gear Train Planetary, Overall Length 9 1/4 in, Tool Weight 2.4 lb.
|
|
|
|
CP CHICAGO PNEUMATIC AIR DRILL MORSE TAPER 3 POWER VANE HEAVY DUTY
Chicago Pneumatic Power Vane air drill. Very heavy duty. It takes morse taper 3 bits that have a flat on one side. I hooked it up to air and it spins(does not seem to be reversible. One direction) but i have no way to test if it is up to spec or not. Very dirty with lots of dings/dents/scratches/grease/rust/etc Cant read the model info See photos for details Surplus from the Quincy Fore Shipyard that operated from 1883-1986 in Massachusetts. About 10 years ago. I purchased thousands of pounds of tools from there. See my other listings for more of them. Ship weight 30 pounds
|
|
|
ATLAS COPCO LBB45-H004 PNEUMATIC DRILL, 4000 RPM,. 1/32" - 5/8"
Inventory Number: 04132140067 Manufacturer: Description: ATLAS COPCO LBB45-H004 PNEUMATIC DRILL. 4000 RPM, 1/32" 5/8" Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, WORKS WHEN AIR IS APPLIED, INCLUDES CHUCK KEY. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now ... morepricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FIL
|
|
|
ARO STRAIGHT PNEUMATIC 3" PANCAKE DRILL (PANCAKE IS DAMAGED) AIRCRAFT TOOLS
ARO STRAIGHT PNEUMATIC 3" PANCAKE DRILL(PANCAKE IS DAMAGED) PANCAKE PORTION OF DRILL IS DAMAGED! SEE PICS! MOTOR RUNS GOOD! MADE BY ARO TOOLS IN THE USA! 3" PANCAKE-WEIGHT: 2.95 LBS-COMES EXACTLY AS PICTURED! SELLING"AS IS" GREAT FIND!
|
|
|
Sears Craftsman Pneumatic 3/8 Drill Chuck Aircraft Auto Press Air Tool Drill Car
Pre-owned Sears"Craftsman" pneumatic 3/8 drill. There are some ding. Ping, scratches and etching on the handle top(which consist of a name and employee# picture# 4) It is recommended to oil this item prior to using since it hasn't been used in awhile. There are"no" bends. Breaks, splits or odor. Being sold"as is" Paypal Only
|
|
|
AIR PNEUMATIC MULTI VANE CORE DRILL DRILLING 458924
HI UP FOR SALE IS THIS AIR PNEUMATIC MULTI VANE CORE DRILL DRILLING 458924 THIS ITEM WAS TESTED AND IS IN GOOD WORKING CONDITION. IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO EMAIL ME. THANK YOU AND HAVE A GREAT DAY! Be sure to add me to your! Check out my!
|
|
|
Thor Power Tool Pneumatic 1/2 Inch 450 RPM Air Drill
Thor Power Tool Pneumatic 1/2 Inch 450 RPM Air Drill These drills were acquired recently as surplus from a manufacturing plant. We have tested them and they work as expected– low speed 450 RPM approx. If you have never used a Thor. You will be completely satisfied. Item comes as pictured with 100% guarantee. Made in the USA. 3101(RJ) 1/26/2012 Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could ... morehave done better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dimensional restri
|
|
|
SIOUX PNEUMATIC DRILL AIR TOOL w/ REVERSE works GOOD
USED SIOUX AIR DRILL WITH REVERSE WORKS GREAT YOU WILL ENJOY THIS PURCHASE IF YOU HAVE USE FOR THIS TOOL 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13e7442f329-0xfe-
|
|
|
Chicago Pneumatic Air Drill Mod 9288
This was one of my personal tools. It is a single speed(about 600 RPM) non reversible drill it has a lot of torque and low speed I used it for deburring. It has a 1/4 inch air inlet and a Jacobs chuck 3/8 thread 4ffc.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*77%3E4ffc-13e76326077-0xf1-
|
|
|
Buffalo Pneumatic 1/2" Impact Driver - & - Campbell Hausfeld 3/8" Air Drill
Pneumatic Air Tools- ONE- Buffalo Pneumatic: 1/2 Impact Driver-ONE- 3/8"Campbell Hausfeld 3/8" Air Drill = GOOD WORKING CONDITION! Used Good Working Order. See Photos of Actual Items
|
|
|
Pneumatic Horizontal Rock Drill Toku TH-800 / RD-7
Completely Rebuilt Rock Drill by Toku + 1 Bit Model: TH-800/ RD-7 Shank Size: R3/4-5/8H Weight: 9 lb Recommended Hose Size: 1/2" Air Inlet: 3/8" Working Pressure: 90 Psi Impact Rate: 1800 Bpm 200 Rpm Air Consumption: 24.7 Cfm Overall Length: 14-9/13" Piston Diameter: 1 5/16 Stroke: 1 1/2" Blow Type: Wet/ Dry Ft. Lbs per Blow@ 90Psi: 12 Chuck Rotation: Left Bit Size: 5/8 Carbide Diameter 18" Length
|
|
|
Vintage A.B. Quackenbush Pneumatic Air Tool impact drill
Description You are bidding on one(1) used A.B. Quackenbush Pneumatic air tool. There is no tag in the air tool to identify the model. Condition Item is used; works fine. Shipping& Handling I can ship USPS or FedEx Ground. Buyer pays $13.97 shipping and handling(shipped in 48 States) I accept Paypal. Tax Louisiana residents will be charged a 4% sales tax. id: 18
|
|
|
BLUE POINT BY SNAP ON RIGHT ANGLE PNEUMATIC DRILL 3/8" BARELY USED #AT811
THIS IS A BARELY USED BLUE POINT RIGHT ANGLE PNEUMATIC DRILL 3/8" MODEL AT811 AND SHOWS NO SIGNS OF BEING USED. Description: Rugged. Reversible right angle drill gets in tight spots comfortably. Convenient one hand push button forward/reverse. Rear exhaust keeps air away from the work area. Lightweight(2.53 lbs. helps avoid fatigue during prolonged use. Paddle style trigger for greater comfort. Ball bearing construction for longer tool life. CE Conformity. THIS SET SELLS NEW FOR $215.00 ON THE TRUCK OR SNAP ON WEBSITE. GET THEM HERE FOR A FRACTION OF THAT! SNAP ON, MADE IN THE USA, MADE TO LAST! TERMS: BUYER TO PAY ACTUAL SHIPPING COST PAYPAL IS THE ONLY FORM OF PAYMENT WE ACCEPT WE WILL ONLY SHIP TO THE 48 STATES. WE DONT SHIP INTERNATIONALLY OR TO HAWAII OR ALASKA APO OR FPO ADDRESSES. THE WINNER WILL RECIEVE THE ACTUAL ITEM PICTURED. ... moreCHECK OUT OUR FEEDBACK AND BID WITH CONFIDENCE. THANKS FOR LOOKING AND GOOD LUCK BIDDING!
|
|
|
Cleveland Pro 78 pneumatic rock drill 7/8"x3 1/4" and several bits
CLEVELAND PRO 78 ROCK DRILL. 7/8"x3 1/4" Comes with one threaded rod. 7/8" x 3 1/4" one threaded rod 7/8" x 4 1/4" one tapered rod, 7/8" x 3 1/4" one long 3/4" bit with 7/8" x 3 1/4" shaft. Also, with 9, 1 1/4" bits for the tapered shaft, 6, 1 3/8" bits for the threaded shaft, and 2, 2 1/2" bits for the threaded shaft. We are having an overstock and doubles equipment sale. We have 50+ pieces we will be selling. Most of the items are in good to like new condition. PLEASE SEE ALL PHOTOS. ALL ITEMS ARE SOLD AS IS. NO WARRANTIES OF ANY KIND ON ANYTHING. If you have a Zero(0) feedback. Call before bidding or bid will be canceled. Pickup only items: Pickup location is: BEVERLY RENTAL DEPOT 131 5 TH ST, BEVERLY. OH 45715 M-F 7am– 4pm. Sat. 8am- noon If buyer wants item shipped. ... moreBuyer will send us bill of lading at FAX 740-984-2607. We have loading facilities. And will assist with palletizing, and loading free of charge. We will NOT quote shipping. Arrange shipping, or pay for shipping. period) Shipping: Items with shipping charges will be shipped 1-3 days after payment has been received via UPS or USPS. UPS will not ship to PO Boxes. We do not ship out of the USA. Payment: We accept Paypal. We will accept green money if picking item up. Other forms of payment may or may not be acceptable. Please check before bidding. Starting Price is the RESERVE. Some items are for sale locally also. We will not cancel an EBay auction if there is a bid. If an item has no bid. We reserve right to sell locally and end auction. So bid fast to prevent local sale. All items to be paid within 10 days of auction end. If not paid. Item will be relisted. Return Policy: If you have an issue with our items. Contact us immediately by PHONE at 740-984-2517. We will work with you to resolve any issues in a manner that is professional and in accordance with all provisions herein. Any other questions please contact us at 740-984-2517.
|
|
|
APT 5" OFFSET REVERSIBLE PNEUMATIC THREADED PANCAKE DRILL AIRCRAFT TOOLS
APT 5" OFFSET REVERSIBLE PNEUMATIC THREADED PANCAKE DRILL-PANCAKE PORTION OF THIS DRILL IS MISSING! MOTOR RUNS GREAT IN FOWARD AND REVERSE-MISSING FOWARD/ REVERSE PLASTIC KNOB-MADE BY APT- AMERICAN PNEUMATIC TOOL-MODEL SRD1-RPM: 1000-ACCEPTS INDUSTRY STANDARD 1/4 X 28 THREADED DRILL BITS WITH A REPAIRED PANCAKE-PANCAKE HEAD IS 5" LONG-WEIGHT: 3 LBS-HAS AN ENGRAVING-MADE IN THE USA! COMES EXACTLY AS PICTURED! SEE ALL PICS! GREAT BUY! 36`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*70%60%3E36%60-13e81a65f98-0xf4-
|
|
|
AB Rockwell 1/4"-28 Threaded 90° 3000 RPM Pneumatic Drill 31AR622 G
AB Rockwell 1/4"28 Threaded 90° 3000 RPM Pneumatic Drill 31AR622 G Description- Part Number: 31AR622 G- Manufacturer: Rockwell/ Allen Bradley- Free Speed: 3000 RPM- Accepts standard 1/4"28 Bits- 90 PSI Max- Tested and is in good working condition- Made in USA- Comes as pictured. 7614( JK)5/7/13 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please ... morecontact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dimensional restrictions. I
|
|
|
CLECO PNEUMATIC DRILL JACOBS, 33DA CHUCK, 400 RPM, 5/64-1/2
Inventory Number: 04132140084 Manufacturer: Description: CLECO PNEUMATIC DRILL JACOBS. 33DA CHUCK, 400 RPM, 5/64-1/2 Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, PART NUMBER WORN OFF, WORKS WHEN AIR IS APPLIED, DRILL CHUCK TURNS-BUT IS STIFF, CHUCK KEY INCLUDED. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice ... moreto have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some au
|
|
|
Cleco 1/4" 5700 RPM Pneumatic Drill Gun 136D060
Cleco 1/4" 5700 RPM Pneumatic Drill Gun 136D060 Description- Part Number: 136D060- Manufacturer: Cleco- Free Speed: 5700 RPM- Chuck Size: 1/4" Chuck Manufacturer: Jacobs- Made in USA- Tested good and comes as pictured- May have engravings or other markings. 7616( JK)5/7/13 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know ... moreyour feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dimensional restrictions. International weight an
|
|
|
BLACK & DECKER 3/8" VIKING PNEUMATIC DRILL - #V313
aims BLACK& DECKER 3/8" VIKING PNEUMATIC DRILL- V313 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made by Black and Decker. This is a used Pneumatic Drill in good condition. Model# V313 Specifications: Chuck Capacity: 3/8"24 THD KG. Speed: 1.800 RPM. Working Air Pressure: 90 psig. Connection: Standard 1/4" Overall Length: 9" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable ... moreTool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. BLACK& DECKER 3/8" VIKING PNEUMATIC DRILL- V313 Reliable Tool Inc. c 2011 | Powered by
|
|
|
AIR MACHINES HEAVY DUTY PNEUMATIC FEED DRILL HEAD
USED… Air Machines" Heavy Duty Drill Head Type: Pneumatic Feed Model: DP18/C/4.0/03/13 Serial Number: 7492 Year of Manufacture: 2002 Condition: Excellent General Specifications: Drilling Capacity: 23/32" 18mm(Mild Steel) 51/64" 20 mm(Aluminum) 7/8" 22 mm(Brass) Stroke: 4" Spindle Taper: 2MT Spindle Speed: 3600 RPM Air Pressure: 85 PSI Slow Feed: 80 mm Electrics: 2.2 KW/ 3 HP Motor 220/ 440 Volts 3-Phase Approximate Weight: 90 Lbs. Approximate Dimensions: 30" L x 7" W x 14" H PRICE: F. O. B. Odessa. Florida…$2,500.00(Plus any applicable taxes.
|
|
|
S7 DOTCO 6200 RPM 90 Degree angle drill aircraft pneumatic tool air rivet
S7 90 Degree Drill Make: Dotco Model: 15L2789 82 RPM 6200 We hooked up air to this and everything appeared to be in working order Shipping $15 We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift ... moreup to 100.000 lbs Industrial Plant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
S6 APT Pancake Nutrunner offset drill aircraft pneumatic tool air rivet
S6 APT Pancake Nut Runner Model: 2000 SD2 We hooked up air to this and everything appeared to be in working order Shipping $15 We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 ... morelbs Industrial Plant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
S5 Buck eye 90 Degree Angle Drill 1100 RPM aircraft pneumatic tool air rivet
S5 90 Degree Air Drill Make: Buck Eye Model: 31AR 625 RPM 1100 We hooked up air to this and everything appeared to be in working order Shipping $15 We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift ... moreup to 100.000 lbs Industrial Plant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
S4 DOTCO 90 Degree Angle Drill 3500 RPM aircraft pneumatic tool air rivet
S4 Make: Dotco Model: 15L2281 32 3500 RPM We hooked up air to this and everything appeared to be in working order Shipping $15 We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 ... morelbs Industrial Plant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
S12 Rockwell 6500 Rpm 90 degree right angle drill aircraft pneumatic tool air
S12 Rockwell 42AR628A 6500 RPM We hooked up air to this and everything appeared to be in working order Shipping $15 We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 lbs Industrial ... morePlant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
S11 Dotco Rivet Shaver hammer reamer drill aircraft pneumatic tool air
S11 DOTCO 15CNS-S147 20.000 RPM We hooked up air to this and everything appeared to be in working order Shipping $15 We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 lbs Industrial ... morePlant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
S10 ATLAS COPCO hammer chisel rivet drill aircraft pneumatic tool air
S10 Atlas Copco Model: RRH06P 7 Bar 100Psi We hooked up air to this and everything appeared to be in working order Shipping $15 We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 ... morelbs Industrial Plant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
S9 Gardner Denver pancake nutrunner rivet drill aircraft pneumatic tool air
S9 Gardner Denver Model: H16NR25P16 We hooked up air to this and everything appeared to be in working order Shipping $15 We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 lbs Industrial ... morePlant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
S8 ZEPHYR Rivet SHAVER reamer angle drill aircraft pneumatic tool air
S8 ZEPHYR RIVET SHAVER We hooked up air to this and everything appeared to be in working order Shipping $15 We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 lbs Industrial Plant ... moreService Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
Sioux 3/8" 5000 RPM Pneumatic Drill
Sioux 3/8" 5000 RPM Pneumatic Drill Description- Manufacturer: Sioux- Chuck Size: 3/8" Free Speed: 5000 RPM- Made in USA- Tested good and comes as pictured- May have engravings or other markings. 7617( JK)5/8/13 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the ... moreproblem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dimensional restrictions. International weight and size restrictions vary. We will ship your item to the most cost
|
|
|
NICE! GARDNER-DENVER PNEUMATIC SELF FEED DRILL
aims NICE! GARDNER-DENVER PNEUMATIC SELF FEED DRILL read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in Canada by Gardner- Denver. This is a Pneumatic Self-Feed Drill in GOOD condition. Features: Double-acting air piston provides smooth. Controlled forward and retract strokes. Needle valve controls allows adjustment of forward and retract strokes. Adjustment screw provides infinite stroke length settings. Ball bearing spindle support offers precision and long ... moreservice life. Specifications: Chuck Capacity in. mm) 1/4" Connections: 1/4" NPT. Stroke Lengths: 4.0" Thrust@ 90 PSI lb. N) 170 lbs.N) Gear Reduction: Double. Overall length: 35" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! GARDNER-DENVER PNEUMATIC SELF FEED DRILL NICE! GARDNER-DENVER PNEUMATIC SELF FEED DRILL NICE! GARDNER-DENVER PNEUMATIC SELF FEED DRILL Reliable Tool Inc. c 2011 | Powered by
|
|
|
aircraft air tools APT Hammer drill rivet aviation pneumatic - No Reserve
APT Air Hammer We hooked up air to this and everything appeared to be in working order Shipping $15 We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 lbs Industrial Plant Service ... moreMillwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
aircraft air tools DOTCO 20,000 rpm Shaver Rivet drill aviation pneumatic
Dotco Air Rivet Shaver 20.000 rpm We hooked up air to this and everything appeared to be in working order Shipping $15 We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 lbs Industrial ... morePlant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13e8d80c775-0xff-
|
|
|
aircraft air tools ROCKWELL 6500 rpm 90 degree drill aviation pneumatic
Rockwell 6500 rpm 90 degree air Drill We hooked up up to this drill everything appeared to be in working order Shipping $15 We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 lbs ... moreIndustrial Plant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
DOTCO 15CFL91-38 3/8" Pneumatic Drill With Jacobs 1BA 3/8-24 Chuck 5200 RPM
Item Description: Used drill in good condition with wear from use and storage. see pictures) 15A-1 TERMS AND CONDITIONS All items for sale are purchased from auctions in new or used condition and described as best as possible in the listings. All items are tested if I have the means and/or technical knowledge to do so. And I try to provide as much information in the descriptions, titles, and pictures as possible. please use the"zoom" feature to help read technical info and help determine condition) If you have a problem with an item you purchased. Please contact me to work out a solution before leaving negative feedback. I will do whatever I reasonably can to make the customer happy, Please understand there are items that I have little or no knowledge about but will try to answer any questions I can. The manufacturers website is ... moreusually the best place to obtain information about products they made. Mid Thumb Surplus is not affiliated with any of the manufacturer's of the products for sale and will not be held liable for damage or injury to persons or property resulting from merchandise purchased from us. Alot of the items for sale can be dangerous if not installed. Operated, or handled by qualified persons. SHIPPING Shipping terms are stated in each listing. Free shipping items will be sent by whatever carrier and service chosen by me. I will always try to ship priority mail even on free shipping items unless the costs are just too high to do so. International rates are firm and we will not mark the item as a gift. Additional charges may apply according to the destination countries customs policies. Buyer is responsible to be aware of and pay for any additional shipping charges that arise. Items will be shipped by the carrier of our choosing, and by the service chosen unless buyer contacts us prior to discuss alternative shipping options. THANK YOU!
|
|
|
PAIR OF DESOUTTER PNEUMATIC DRILL GUNS W/ JACOBS DRILL CHUCK 0 -1/4"
aims PAIR OF DESOUTTER PNEUMATIC DRILL GUNS W/ JACOBS DRILL CHUCK 0-1/4" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made by Desoutter& Jacobs This is a Pneumatic Drill w/ Jacobs Drill Chuck in good condition. Model# DB7-P(Gun) 7B(Drill Chuck) Specifications: Chuck Capactiy: 0 to 1/4" Working Air Pressure: 90 psig. Overall Length: 7" x 7" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call ... moreor email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PAIR OF DESOUTTER PNEUMATIC DRILL GUNS W/ JACOBS DRILL CHUCK 0-1/4" Reliable Tool Inc. c 2011 | Powered by o`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-13e8e536123-0xf5-
|
|
|
Dotco 3/8" 1300 RPM Pneumatic Drill 15CNL95-51
Dotco 3/8" 1300 RPM Pneumatic Drill 15CNL95-51 Description- Part Number: 15CNL95-51- Manufacturer: Dotco- Chucks Size: 3/8" Free Speed: 1300 RPM- Motor Output: 0.9 HP- Length: 8.4" Non-Reversible- Made in USA- Tested good and comes as pictured. May have engravings or other markings. 7656( JK)5/8/13 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please ... morecontact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dimensional restri
|
|
|
INGERSOLL-RAND SIZE 1P PNEUMATIC DRILL WITH SUPREME CHUCK, 0-1/2" CAPACIT
Inventory Number: 12090045199 Manufacturer: Description: INGERSOLL-RAND SIZE 1P PNEUMATIC DRILL WITH SUPREME CHUCK. 0-1/2" CAPACIT Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY: 1, AS SHOWN, SEE PICTURES, TESTED, WORKS BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now ... morepricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FIL
|
|
|
Desoutter Electric Drive Pneumatic Feed Drill M2000 AFDE400
Desoutter Electric Drive Pneumatic Feed Drill M2000 AFDE400 Serial: C00730-1999 2850 RPM@ 6.3 bar(91 PSI) Weight: 34 lbs(ADO112 2.13.A L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have ... moreno control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place a
|
|
|
ROTOR DRILL PNEUMATIC TYPE E22 M830
THIS IS MADE BY THE ROTOR TOOLCO.CLEVELAND OHIO.PNEUMATIC ROTOR DRILL. TYPE E22.M830, 1201,1000
|
|
|
Kobe Air Pneumatic Drill die grinder 6mm 28000 RPM
GD2806L HIGH SPEED MINI DIE GRINDER. KBE2702035M. Description. Kobe? High Speed Mini Die Grinder GD2806L For precision engineer?s mould making etc. Safety lever throttle. Front exhaust, ultra compact and lightweight. Specifications: Free speed: 25.000rpm. Collet size: 6mm. Air inlet thread: 1/4? NPT. Air hose size(ID) 10mm. Air pressure: 90PSI. Air consumption: 4CFM* Noise level: 94dB(A) Sound power level: 103dB(A) Vibration: 5.0m/s. Overall length: 120mm. Based on a 15 second cycle per minute average use.
|
|
|
United Air Pneumatic 1/4" 90in/lb Pancake Nutrunner Drill 5RSATP-74-502
United Air Pneumatic 1/4" 90in/lb Pancake Nutrunner Drill 5RSATP-74-502 Description- Part Number: 5RSATP-74-502- Manufacturer: United Air(made by Cleco) Drive Size: 1/4" Torque Rating: 90 in/lbs- Air Inlet(NPT) 1/4" Made in USA- This has been tested this tool and is 100% guaranteed to be working. 6685( JK)5/10/13 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have ... moredone better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dim
|
|
|
Jiffy Pneumatic 1/4"-28 Threaded Pancake Offset Nutrunner Drill RD2
Jiffy Pneumatic 1/4"28 Threaded Pancake Offset Nutrunner Drill RD2 Description- Part Number: RD2- Manufacturer: Jiffy- Free Speed: 450 RPM- Thread Size: 1/4"28- Made in USA- We have tested this nutrunner and is 100% guaranteed to be working. Comes as pictured with some cosmetic wear(including engravings) 7660( JK)5/10/13 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could ... morehave done better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with
|
|
|
Cleco Pneumatic 1/4" 90in/lb Pancake Nutrunner Drill 5RSATP-74-502
Cleco Pneumatic 1/4" 90in/lb Pancake Nutrunner Drill 5RSATP-74-502 Description- Part Number: 5RSATP-74-502- Manufacturer: Cleco/ United Air Tool- Drive Size: 1/4" Torque Rating: 90 in/lbs- Air Inlet(NPT) 1/4" Made in USA- This has been tested these and is 100% guaranteed to be working. 7661( JK)5/10/13 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better ... moreplease contact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dimensional res
|
|
|
Desoutter 8100 RPM Electric Drive Pneumatic Feed Drill Molycote G68
Desoutter 8100 RPM Electric Drive Pneumatic Feed Drill Molycote G68 Ser No. CO2544-1999 8100 RPM@ 6.3 Bar(91 PSI) Weight: 65 lbs(ADO115 2.12.B L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing ... morewe have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To
|
|
|
Dotco Pneumatic Offset 3/8" 240 RPM Nutrunner Pancake Drill 15C2947-90
Dotco Pneumatic Offset 3/8" 240 RPM Nutrunner P ancake Drill 15C2947-90 Description- Part Number: 15C2947-90- Manufacturer: Dotco- Free Speed: 240 RPM- Hex Size: 3/8" Made in USA- We have tested this nutrunner and is 100% guaranteed to be working. Comes as pictured with some cosmetic wear(including engravings) 7659( JK)5/8/13 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could ... morehave done better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit
|
|
|
AR60 AMERICAN GATOR SPEEDY AIR PNEUMATIC MILL DRILL PRESS VISE JAWS 3"
Untitled Document You are biding on a: AR60 AMERICAN GATOR SPEEDY AIR PNEUMATIC MILL DRILL PRESS VISE JAWS 3" It is the complete ready-made jig for high speed volume production needs These Items were recently acquired from an industry that closed and auctioned their entire inventory. If you need more information please don't hesitate to ask. This would be great for maintenance purposes or a spare. Pictures are of the actual products. We will do our best to disclose this information in the auction. Some items are New Old Stock and some are Used Inventory. None of the items being sold have factory warranties. We generally do not have expertise in a lot of the items we sell and it is strongly recommended that when in doubt an expert in the field be consulted. The items for sale might be new or used but should be considered used. I browsed ... morefor individual pricing on-line. And basically cut the cost to � or less of the suggested price. Please check back often to see what has been added � We have a huge inventory of Industrial Control items that will be sorted and sold. Thank you for your interest in Otay Metal Mart. A leading provider of used and reconditioned heavy machinery and surplus metal. For more than 50 years. Otay Metal Mart have supplied the small machine shop industry with quality, new, used and reconditioned equipment and asset metal services. Please feel free to ask questions we are always happy to answer. Karlo Turner Metals Tools and Machines Company Name Otay Metal Mart 195 Mace St. Chula Vista. CA. 91911. All auctions must be paid for within 5 business days. Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 5 business days of the end of the auction. Item may be offered to the next highest bidder or relisted. We accept PayPal. Or Cash for local pickups. We do NOT accept personal or busi
|
|
|
AEG 210 Pneumatic Hammer Drill
This is a AEG 210 hammer drill. The label on it is pictured but it reads 267828 KUA 600w 60hz. 115v 5.2a. stone* 3/4 steel* 1/2. Mach no 475484 made in W Germany. It comes with 3 bits and the case as pictured. This is an as is sale. Serious Bidders only.
|
|
|
Medtronic Midas REX Pneumatic Air Neurosurgery Surgical Drill W/ Attachment
You are bidding on A Medtronic Midas REX Pneumatic Air Neurosurgery Surgical Drill W/ Hose.Footswitch, Manuel and Attachment. Just removed from service in excellent condition. What you see in the pictures is what you will get. Please TAKE A LOOK AT THE PICTURES FOR MORE DETAILS! If you have any question Please email me. Thank you and good luck bidding International bidders please contact us before bidding to estimate shipping cost. We ship fedex only Please contact me if you have an issue and I will make it right. Thank you! f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13e931b7e11-0xf4-
|
|
|
Gardner Denver Air Feed Pneumatic Drill 92D618P1-3/4 0" to 3/8" Airfeedrill
This listing is for a Gardner-Denver pneumatic air feed drill. Equipped with a chuck that has a 3/8" capacity. This drill has not been tested by us. It is being sold"as is" Size: 92D618P1-3/4 Stroke length is 1-3/4" Serial# A180284 24" Length We welcome any questions that you may have prior to bidding. Feel free to send us a message or contact Steve Nelson via phone at 815-758-6534 during normal business hours. We will respond to your phone calls as soon as possible. PLEASE READ THE FOLLOWING VERY CAREFULLY: Fees: An 8.5% State of Illinois sales tax is charged for all winning bidders that are Illinois residents except for those that have a state tax ID. A $35.00 palletizing fee is required for each pallet used on LTL truck shipments The cost of any item requiring crating shall be determined after the close of the ... moreauction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction. If 30 days have passed since the item was paid for. The item will be considered abandoned and the winning bidder is deemed to have forfeited all monies paid to the seller. The item will then be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. Items Requiring Freight Shipment: All items are shipped F.O.B. from Dekalb. IL 60115. Many of our customers have used the following trucking/freight companies for their shipping needs: Small Business Transportation at 888-368-6022 x218. Contact: Gil Freight Quote at 888-595-6298 x1250. Contact: Bob All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Fine Print: Winning bid
|
|
|
CHICAGO PNEUMATIC CP789R-26 REVERSIBLE AIR DRILL FOR REPAIR / PARTS
CHICAGO PNEUMATIC CP789R-26 REVERSIBLE AIR DRILL FOR REPAIR/ PARTS-THIS DRILL DOES NOT WORK. NEEDS REPAIR! MOTOR DOES NOT RUN! AIR JUST COMES OUT AND DOES NOT SPIN-CHUCK IS ALSO DAMAGED-CHICAGO PNEUMATIC MODEL CP789R-26-REVERSIBLE-33BA CHUCK-COMES EXACTLY AS PICTURED! SELLING FOR REPAIR AND/ OR PARTS! GREAT FIND!
|
|
|
Chicago 3/8" 3300RPM Pneumatic Air Drill CP2480-033
Chicago 3/8" 3300RPM Pneumatic Air Drill CP2480-033 Description- Model: CP2480-033- Manufacturer: Chicago- Free Speed: 3300 RPM- Chuck Capacity: 3/8" Chucks vary from Jacob to other brands but are all 3/8" Made in USA. Excellent Heavy Duty Quality- Drill has been tested and is 100% Guaranteed to be working- Comes as pictured. 6504. 7613( JK)10/4/12 added 4 5/3/13 JK General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate ... morethat in your feedback. If you feel like we could have done better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional
|
|
|
Thor Power Tool 3/8" 240 RPM Pneumatic Air Drill
Thor Power Tool 3/8" 240 RPM Pneumatic Air Drill Description- Model: 8456- Manufacturer: Thor- Serial: 644655- Free Speed: 240 RPM- Chuck Capcity: 3/8" Made in USA. Excellent Heavy Duty Quality- Tested and works great. 100% guarunteed- Comes as pictured#6503( JK)10/4/12 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know your ... morefeelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dimensional restrictions. International weight and s
|
|
|
SPEEDAIRE PNEUMATIC 2YPR5 REVERSIBLE DUTY AIR DRILL KEYLESS 1/2" 800RPM 15CFM
BT# 10790 TJ You are looking for: SPEEDAIRE PNEUMATIC 2YPR5 REVERSIBLE DUTY AIR DRILL KEYLESS 1/2" 800RPM 15CFM USED ITEM. WITHOUT ORIGINAL BOX! IN GOOD CONDITIONS. 10 DAYS WARRANTY! Manufactured by: SPEEDAIRE. Additional info: REVERSIBLE DUTY AIR DRILL Model: 2YPR5 Serial No. 08091048 Chuck Size(In. 1/2 RPM 800 Drill Chuck Type Keyless Variable Speed Reversing Throttle Type Trigger Bearing Ball/Roller Bearing Require pressure PSI 90 Applications: Pneumatic Drill for general duty Click over the picture below to access the photo gallery: PLEASE LOOK CAREFULLY AT THE PICTURES TO SEE THE DETAILS Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 2 business days We ship with: Powered by
|
|
|
Chicago Pneumatic 3/8" 600RPM Air Drill CP2480-06
Chicago Pneumatic 3/8" 600RPM Air Drill CP2480-06 Description- Model: CP2480-06- Manufacturer: Chicago Pneumatic- Free Speed: 600 RPM- Non-Reversible- Chuck Capacity: 0-3/8" High quality tool for heavy industrial use. Tested and works good. May have some cosmetic markings/engravings. 6484-B( JK)10/2/12 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please ... morecontact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dimensional restrict
|
|
|
Chicago Pneumatic 1/2" 600RPM Air Drill CP2480-06
Chicago Pneumatic 1/2" 600RPM Air Drill CP2480-06 Description- Model: CP2480-06- Manufacturer: Chicago Pneumatic- Free Speed: 600 RPM- Non-Reversible- Chuck Capacity: 0-1/2" High quality tool for heavy industrial use. Tested and works good. May have some cosmetic markings/engravings. 6484-A( JK)10/2/12 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please ... morecontact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dimensional restrict
|
|
|
ATLAS COPCO LIGHTWEIGHT LUM12 SR11-U PNEUMATIC 5" PANCAKE DRILL AIRCRAFT TOOLS
ATLAS COPCO LUM12 SR11-U AIR PANCAKE DRILL W/ OUT PANCAKE HEAD-THIS PANCAKE DRILL NEEDS REPAIR. DOES NOT WORK! IT IS MISSING THE PANCAKE HEAD AND IT DOES NOT SPIN WHEN CONNECTED TO AIR-UNSURE AS TO WHY IT DOES NOT SPIN. IT MAYBE A SIMPLE FIX OR NOT-ATLAS COPCO MODEL LUM12 SR11-U-REVERSIBLE-LIGHTWEIGHT AT ONLY 1 POUND! ATLAS COPCO ARE TOP OF THE LINE AIR TOOLS FOR THE AIRCRAFT/ AVIATION INDUSTRY-COMES EXACTLY AS PICTURED! SELLING"AS IS" NO RETURNS GREAT FIND!
|
|
|
ATLAS COPCO 1-1/2" PNEUMATIC HEX SQUARE DRIVE PANCAKE AIR DRILL AIRCRAFT TOOLS
ATLAS COPCO 1-1/2" PNEUMATIC HEX SQUARE DRIVE PANCAKE AIR DRILL-THIS PANCAKE DRILL'S MOTOR RUNS GREAT BUT THE PANCAKE HEAD COMES LOOSE IN PIECES! WE HAVE NO KNOWLEDGE ON HOW TO PUT IT BACK TOGETHER OR IF ALL THE PARTS ARE THERE IN WORKING CONDITION! THE ATLAS COPCO PISTOL GRIP MOTOR CAN ALSO BE USED AS A SCREWDRIVER WITH THE RIGHT HEAD APPLICATION-ATLAS COPCO MODEL LUD 22 HR12-RPM: 750-REVERSIBLE-TOP OF THE LINE AIR TOOLS MADE IN SWEDEN-PANCAKE HEAD IS 1-1/2" SMALL AND LIGHT WEIGHT PISTOL GRIP AIR TOOL THAT WEIGHS UNDER 2 POUNDS! COMES EXACTLY AS PICTURED! SEE ALL PICS! SELLING"AS IS" NO RETURNS ON THIS ITEM PLEASE GREAT BUY!
|
|
|
DESOUTTER AFD40 Pneumatic Drill CNC ROUTER WORK fast holes 52T
DESOUTTER AFD40 Pneumatic Drill CNC ROUTER WORK fast holes 52T Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge 513 W 10# f25 If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. Here is a used working DESOUTTER AFD40 Pneumatic Drill. Came off my motionmaster CNC ROUTER. Makes quick work of drilling holes. $2500 when new. Enlarge the photos for inspection and general idea of what you are getting. Free Shipping. The photographs in this listing show everything which is included in the sale. enlarge them for best view. The photos will tell you the actual condition of the item) If you have any questions or need more information or photos, please ask before you buy or bid. Sold as is, all sales are final. Shipping: ... morewe will ship USPS(shipping days are currently Tuesday and Thursday as of 11-11) insurance and tracking are included on all items. And tracking number will be emailed to buyer. Items listed for customer pick-up only cannot be shipped. If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. We will ship USPS Media Rate for books. We ship USPS Air Priority. Insured, for international shipments, and shipments to Alaska and Hawaii. If shipment by common carrier is desired. Arrangements must be made and prepaid by the buyer. If you require an item by a specific date. Inquire before purchasing, please! Large. Heavy or irregular pieces can take longer to ship due to special boxing needs. Heavy things may go FEDEX. Items to be picked up by customer's choice should be paid for in exact cash at time of pick-up. Arranged by appointment. Payment: An invoice will be sent to you soon after the close of the auction. We accept payment via Paypal only. In accordance with ebay regulations. Payment is expected within 3 days. EBAY forwards all sales information. Therefore, California State Sales Taxes are collected and forwarded to the state of Califor
|
|
|
SIOUX 6000 RPM Pneumatic Drill SDR10P60N2 USA!!!
YOU ARE BIDDING ON A USED SIOUX 6000RPM PNEUMATIC DRILL. ALTHOUGH USED. ITS STILL IN GREAT CONDITION AND WORKS PERFECTLY. THE MODEL NUMBER FOR THIS TOOL IS"SDR10P60N2" THERE IS NO BOX, MANUAL OR CHUCK INCLUDED IN THIS AUCTION. MADE IN THE USA! PLEASE VIEW ALL PICTURES AND DESCRIPTION BEFORE BIDDING AS ALL ITEMS ARE SOLD AS IS. THERE ARE NO REFUNDS OR RETURNS. WHAT YOU SEE IN THE PICTURES IS THE ACTUAL ITEM(S) YOU WILL RECEIVE UPON WINNING THIS AUCTION(UNLESS STOCK PHOTO IS USED FOR DVD'S AND GAMES) PAYMENT IS DUE WITHIN 5 DAYS OF CLOSING DATE. I WILL ONLY SHIP INSIDE THE UNITED STATES. PLEASE ASK IF YOU HAVE ANY QUESTIONS. GOOD LUCK BIDDIN!
|
|
|
S19 Rockwell 90 Degree Angle Drill 6500 RPM aircraft pneumatic tool air rivet
S19 Make: Rockwell Model: 42AR628 A 6500 RPM We hooked up air to this and everything appeared to be in working order Shipping $15 We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 ... morelbs Industrial Plant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
S18 DOTCO 90 Degree Angle Drill 6200 RPM aircraft pneumatic tool air rivet
S18 Make: Dotco Model: 15L2789 32 6200 RPM We hooked up air to this and everything appeared to be in working order Shipping $15 We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 ... morelbs Industrial Plant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES k5n.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rkpg%7C%3Ek5n-13ea39a8f2a-0xf5-
|
|
|
S20 Dotco 90 Degree Angle Drill 6200 RPM aircraft pneumatic tool air rivet
S20 Make: Dotco Model: 15L2789 32 6200 RPM We hooked up air to this and everything appeared to be in working order Shipping $15 We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 ... morelbs Industrial Plant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
S17 ATLAS COPCO Hammer chisel drill aircraft pneumatic tool air
S17 Air Hammer Make: ATLAS COPCO Model: RRH 06P We hooked up air to this and everything appeared to be in working order We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions Shipping is only $15 This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift ... moreup to 100.000 lbs Industrial Plant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
S16 DEUTSCH APT Hammer chisel drill aircraft pneumatic tool air
S16 Air Hammer Make: DEUTSCH APT Model: CSRR-1 We hooked up air to this and everything appeared to be in working order Shipping $15 We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 ... morelbs Industrial Plant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
S15 Dotco 23,000 RPM Rivet SHAVER reamer drill aircraft pneumatic tool air
S15 RIVET SHAVER Make: Dotco Model: 15C2960 Rpm: 23.000 We hooked up air to this and everything appeared to be in working order Shipping $15 We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift ... moreup to 100.000 lbs Industrial Plant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*55267%60%3E-13ea3baacb2-0xf8-
|
|
|
S14 Dotco 20,000 RPM Rivet SHAVER reamer drill aircraft pneumatic tool air
S14 RIVET SHAVER Make: Dotco Model: 15CNS-5147 Rpm: 20.000 We hooked up air to this and everything appeared to be in working order Shipping $15 We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift ... moreup to 100.000 lbs Industrial Plant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
S13 Rivet SHAVER reamer angle drill aircraft pneumatic tool air
S13 RIVET SHAVER We hooked up air to this and everything appeared to be in working order Shipping $15 We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 lbs Industrial Plant Service ... moreMillwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
S24 Lot of 2 Dotco 6200 RPM Quick connect drill aircraft pneumatic tool air
S24 Lot of 2 Quick Conect Air Drills Make: DOTCO Both are 6200 Rpm We hooked up air to this and everything appeared to be in working order We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions Shipping is only $15 This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy ... moreDuty Forklift up to 100.000 lbs Industrial Plant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
S23 APT Hammer chisel drill aircraft pneumatic tool air - No Reserve
S23 Air Hammer Make: APT Model: LSRR-1 We hooked up air to this and everything appeared to be in working order We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions Shipping is only $15 This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 ... morelbs Industrial Plant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
S22 ATLAS COPCO Hammer chisel drill aircraft pneumatic tool air
S22 Air Hammer Make: ATLAS COPCO Model: RRH 10P We hooked up air to this and everything appeared to be in working order We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions Shipping is only $15 This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift ... moreup to 100.000 lbs Industrial Plant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13ea4553ebc-0x109-
|
|
|
CHICAGO PNEUMATIC 30 DEGREE AIRCRAFT DRILL - VERY RARE
Up for grabs is a very rare Chicago Pneumatic 30 degree drill with 1/4-28 threads(part# CP-2320-LA30) This is an awesome drill with tons of torque and whisper quiet. New it was over $1200. Pick it up today for a fraction of that. Item may have my PID engraved. If it is, it will be very small and light and easily removed. I don't have a compressor to buff it out. I will only accept Paypal for payment. Item will ship out no later than Friday afternoon. Check my other auctions for more aviation tools. Good luck and happy bidding. Posted with On May-14-13 at 12:55:54 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: MORE RESOURCES:
|
|
|
ATLAS COPCO PNEUMATIC 90 DEGREE AIRCRAFT DRILL
Up for grabs is an Atlas Copco 90 degree aircraft drill with a custom 1/4-28 threaded insert. It runs great and true. Item may have my PID engraved. If it is, it will be very small and light and easily removed. I don't have a compressor to buff it out. I will only accept Paypal for payment. Item will ship out no later than Friday afternoon. Check my other auctions for more aviation tools. Good luck and happy bidding. Posted with On May-14-13 at 12:44:40 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: MORE RESOURCES:
|
|
|
Ingersoll Rand Aircraft Pneumatic Air Palm Drill
Ingersol rand palm drill. Very quiet great for aircraft mechanics. 2800 rpm Posted with
|
|
|
2 CHICAGO & CENTRAL PNEUMATIC DRILL W/ 3/8" (10MM) CAP.
aims 2 CHICAGO& CENTRAL PNEUMATIC DRILL W/ 3/8" 10MM) CAP. read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by Chicago& Central. These are 2 Pneumatic Drills in good condition. Model#s: CP785& 94585 Specifications: Chuck Capacities: 3/8" 10mm) Speeds: 1.700& 2,400 RPM. Working Air Pressures: 90 psig. Connections: Standard 1/4" Overall Lengths: 8" Comes as shown in pictures. Check out the photos! if you have any ... moreother questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 2 CHICAGO& CENTRAL PNEUMATIC DRILL W/ 3/8" 10MM) CAP. Reliable Tool Inc. c 2011 | Powered by
|
|
|
Air Drill 3/8" w/ jacobs chuck SM4G61 3/8-24 air fitting and chuck key pneumatic
Air Drill 3/8” Part Number Drill chuck PN: SM4G61 Condition Used– works good! Description(chuck) 3/8-24 THD. 1/16-3/8 CAP. 1.5MM-10 CAP. Drill includes chuck key and air fitting Returns If on a rare occasion an item is DOA. Please contact us and we will work it out and refund when appropriate within 14 days. Shipping We ship using USPS and UPS and do not charge a handling fee! If you would like to pay for NEXT DAY shipping just ask. INTERNATIONAL BUYERS please contact us for shipping quotes. Feedback We leave positive feedback when payment is received. Please return the favor if you have a good experience. If there is a problem please contact us to have it fixed! About Us AMI is the leading independent provider of service. Parts, retrofits and maintenance programs for turret punch presses, press brakes and other CNC sheet metal forming equipment. ... moreService. Project Services, Parts and Control Retrofits for CNC Precision Fabricating Equipment Contact Us Call us at 513-965-6468 or message me through ebay Store Link Check out my! Be sure to add me to your!
|
|
|
LOT (3) Ingersoll Rand 100PQ1 1/4" Hex Pneumatic Pulse Air Driver Drill 9500RPM
Your bid is for a lot of(3) Ingersoll Rand 100PQ1 1/4" Pneumatic drivers These were from a major automotive plant that shut down. OK. These things look like they have been beaten senseless, and they have, BUT: This plant had full in-house rebuilding for these tools and they were constantly maintained. I've tested these and they all run. Amazingly smooth! They have obviously been rebuilt many times. These things are clearly battle hardened beasts that aren't going to give up anytime soon. Note these are non-shutoff tools that run at 9500RPM. So they are more like drills than screwdrivers, but they use 1/4" quick change bits.
|
|
|
LOT (3) URYU Aimco Alpha 50D 1/4" Hex Pneumatic Air Driver Drill 6400 RPM
Your bid is for a lot of(3) Drivers(3) Uryu Alpha 50D These were from a major automotive plant that shut down. OK. These things look like they have been beaten senseless, and they have, BUT: This plant had full in-house rebuilding for these tools and they were constantly maintained. I've tested these all with air and they all run. Forward and reverse, amazingly smooth! They have obviously been rebuilt many times. These are clearly battle hardened beasts that aren't going to give up anytime soon. I belive this is 6400 RPM non-shut off. It's more a of a drill than a screw gun. Though it uses 1/4" quick change bits.
|
|
|
Ingersoll Rand 180SQ1 9000 RPM Inline Pulse Pneumatic Drill Driver 1/4" Hex
Ingersoll Rand 180SQ1 From a major automotive plant that shut down. They maintained these tools inhouse. I am fairly sure the tip has been replaced. This was probably rebuilt various times. Testing and working. Drive Type 1/4" Hex, Free Speed 9.000 RPM, Length 8.7 In, Min Torque 6 ft lb, Max Torque 22 ft lb, Min Torque 8 Nm, Max Torque 30 Nm, Style Inline, Clutch Type Non Shut Off, Trigger Type Inline, Weight 2 lb, Manufacturer Ingersoll Rand, Max Free Speed 9000 rpm,
|
|
|
Uryu URD-9 Heavy Duty Pneumatic D-Handle Vertical Air Drill
This is an older drill from URYU that was in use at a major automotive plant for many years. Tested and working. They maintained and rebuilt their tools in house. the model number appears to be URD-9. Which I can't find online anywhere. Heavy duty D handle drill for vertical use. Chuck key not included. Sold as-is
|
|
|
DOTCO Pneumatic Drill Motor
For sale a used Dotco air-drillwith 3/8" USA Jacobs chuck. Like new, runs excellent.
|
|
|
ARO Right Angle Pneumatic Air Drill - USA Made
This is a used ARO Right Angle Pneumatic Air Drill with a Jacobs 32B chuck- USA made. Has been tested and works fine. No chuck key is included. The chuck itself is tight and is difficult to turn by hand- requires a key. If you are not happy with the item. Then send it back. I offer a 14 day money back guarantee(see return policy)
|
|
|
Pneumatic Drill with Jacobs #721G Chuck, Used
Pneumatic Drill Please read all payment and shipping instructions before you bid or pay- see Buyer Checklist below. This auction is for a Used. Pneumatic Drill with Jacobs#721G Chuck. It is in good used working condition. No key. 0 To 5/16" 0 To 8mm Weight Before Wrapping is 2 lbs. Ohio residents must pay 7% sales tax. Payment is expected from winning bidder within 7 days of auction end. Non-paying bidders will be reported. We view negative feedback as a last resort for buyers and sellers. Anything can be worked out through communication so both sides can receive positive feedback. Shipping: This item will be shipped via UPS. Shipping rate is our actual UPS discounted account rate. We do not want our customers to pay more than the actual shipping. Shipping Quotes: We will be happy to quote shipping rates for you on combined packages. ... moreBuyer Checklist: Am I an Ohio resident? If"yes" you must pay 7% Ohio sales tax. You should wait for the invoice from seller and IGNORE THE EBAY END OF AUCTION PAYMENT NOTIFICATION. If you do not pay the Ohio sales tax. Your package WILL NOT SHIP. All auction items are shipped- No pickup- No exceptions. 822.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*604g261%3E-13eb4061768-0xf2-
|
|
|
Dotco 600 RPM Pneumatic Drill W/QC Chuck Aircraft Tools
Reconditioned Dotco 600 RPM Air Drill Motor Model 15C1489A Very nice Palm Drill*Includes Magnavon Quick Change Chuck* Use with Aerospace Industry Quick Change Drill Bits* Can also be used with any standard 3/8"24 chucks* See my for drill bits for these motors. These motors are still good for years of excellent service* Reconditioned Dotco Model 15C1489A 600 RPM drill motor has been thouroughly cleaned. Lubricated. Parts replaced as necessary and checked for smooth operation. This is a typical picture. Your drill may look slightly different. For maximum shipping savings on multiple orders. Please request an invoice for correct shipping charges before paying. Quick Reference Guide to Store Categories. Click Title to go to Category
|
|
|
PAIR OF DESOUTTER / SIOUX PNEUMATIC DRILL GUNS W/ JACOBS DRILL CHUCK 0 -1/4"
aims PAIR OF DESOUTTER/ SIOUX PNEUMATIC DRILL GUNS W/ JACOBS DRILL CHUCK 0-1/4" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made by Desoutter. Jacobs& Sioux This is a Pneumatic Drill w/ Jacobs Drill Chuck in good condition. Model# DB7-P(Gun) 7B(Drill Chuck) Specifications: Chuck Capactiy: 0 to 1/4" Working Air Pressure: 90 psig. Overall Length: 7" x 7" Comes as shown in pictures. Check out the photos! if you have any other questions. ... moreGive us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PAIR OF DESOUTTER/ SIOUX PNEUMATIC DRILL GUNS W/ JACOBS DRILL CHUCK 0-1/4" PAIR OF DESOUTTER/ SIOUX PNEUMATIC DRILL GUNS W/ JACOBS DRILL CHUCK 0-1/4" Reliable Tool Inc. c 2011 | Powered by
|
|
|
USA! ARO AUTO-FEED PNEUMATIC DRILL UNIT W/ JACOBS CHUCK NO.8245-B30-2
aims USA! ARO AUTO-FEED PNEUMATIC DRILL UNIT W/ JACOBS CHUCK NO.8245-B30-2 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made by Aro. This is a an Autofeed Pneumatic Drill Unit in Good condition. Model# 8245-B30-2 Features: ARO Bant-A-Matic. Par-A-Matic, and Super Par-A-Matic Drillsprovide the selection, performance, and degree of precision to automate a wide range of secondary machining applications simply and economically. They utilize compressed air for both ... morethe spindle rotation and feed/ control functions. The reliable rotary-vane air motor offers high power-to-size performance which minimizes tool size and weight for added machine design flexibility. The tools are easily installed, requiring only simple pneumatic circuitry. They can be used individually or in conjunction with other electric& pneumatic tools. Specifications: Cap: 0-1/4" Stroke: 3" Free speed: 2700 rpm. Overall Lengths: 18" Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. USA! ARO AUTO-FEED PNEUMATIC DRILL UNIT W/ JACOBS CHUCK NO.8245-B30-2 USA! ARO AUTO-FEED PNEUMATIC DRILL UNIT W/ JACOBS CHUCK NO.8245-B30-2 Reliable Tool Inc. c 2011 | Powered by
|
|
|
DOTCO Pneumatic Air Drill with 0-1/4" Jacobs and Quick Change chuck , 3200 rpm
DOTCO Pneumatic Drill Motor Model- 15CSS32-40 Jacobs 0-1/4" chuck and Quick C h ange chuck 3200 RPM This used drill is in good condition and runs good and strong
|
|
|
SELF FEEDING PNEUMATIC DRILL air 3/4" JACOBS CHUCK shop tool ARO USA 8670-4-1
used self feeding air drill ARO Bryan Oh USA# 8670-4-1 came in a lot from a sale i don't know anything about it- NOT TESTED please check my other auctions and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Mac Tools 1/2" Reversable Pneumatic Air Drill, Model AD527, NO RESERVE!!
Description You're bidding on a Mac Tools 1/2" reversable air drill. Model AD527. This drill is in good working condition with no issues. Cosmetically this drill is very nice and appears to have had little use. You'll receive the exact drill in the photos so be sure to check out the super size pictures to get a better idea of the overall cosmetic condition of this drill. This item will be shipped within 24hrs. of payment. I only ship to the USA! I will not respond to e-mails asking me to ship to another country. Happy bidding and good luck. Payment We accept paypal payments. And all payments are due within 4 days of auction close. All other forms of payment must be pre-approved prior to bidding. If payment is not received within 4 days of auction end, a dispute will be opened for the unpaid item. Please do not bid if you do not ... moreintend to remit payment properly and follow through with your purchase. Shipping We ship daily. Mon-Fri via USPS and UPS. We only ship to paypal confirmed addresses in the United States! We offer a combined domestic discount for multiple auctions won. To receive the discounted shipping, you must wait until you receive the combined invoice from us prior to paying for auctions won. Flat rate shipping prices are for the lower 48 continental United States. Alaska and Hawaii customers should contact us first for a shipping quote. We do not ship to Puerto Rico. Terms of Sale Bidding and winning our auction is a legal binding contract. Be sure to read auction fully and carefully. If you have any questions. Please ask them prior to bidding. We do follow the ebay dispute process for all unpaid bids, and will file a non paying bidder dispute for all auctions not paid within 4 days of the auction close. We only charge actual shipping costs! There are no hidden fee's in our auctions! WE ALWAYS LEAVE A POSITIVE FEEDBACK! Our system automatically leaves a positive feedback when we receive a positive feedback. We manually leave positive feedback for bidders who choose to wait to receive
|
|
|
INGERSOLL RAND PNEUMATIC CORE DRILL RIG AIR POWERED WITH 2 10 inch BITS
INGERSOLL RAND PNEUMATIC CORE DRILL RIG AIR POWERED WITH 2 10 inch BITS INGERSOLL RAND PNEUMATIC CORE DRILL RIG AIR POWERED WITH 2 10 inch BITS. THIS IS A VERY STRONG DRILLING UNIT. All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR PHONE NUMBER IS 1 718 698 8400 ... moreWE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400
|
|
|
Dynabrade Pneumatic Drill 53430 Used Works Great No Reserve Free Shipping
Used Dynabrade pneumatic drill. Not the prettiest but works great. Has some numbers/initials scratched in the handle. Model number 53430. No reserve and FREE SHIPPING Posted with
|
|
|
PORTER CABLE RIGHT ANGLE PNEUMATIC DRILL
POTER CABLE RIGHT ANGLE PNEUMATIC DRILL GOOD USED CONDITION LOW START BID- NO RESERVE! FROM A SMOKE-FREE HOME. WILL SHIP WORLDWIDE. SHIPPING WITHIN CANADA AND TO THE U.S. IS $21.95. PAYPAL ONLY. THANKS FOR LOOKING! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13ec6e3283b-0x106-
|
|
|
Sioux Aircraft Tools 1454HP Pneumatic Palm Drill, 3/8" Chuck, 2,600 RPM
Sioux Aircraft Tools 1454HP Pneumatic Palm Drill. 3/8" Chuck, 2,600 RPM
|
|
|
THOR Heavy Duty Pneumatic Air Drill Morse Taper # 3 Power Vane
THOR heavy duty pneumatic air drill. Independent Pneumatic Tool Co. Chicago. Model 2374. Size 263Y. Serial#278073. Takes a#3 morse taper. Single speed. No reverse. Works. I hooked it up to my air compressor and it works although I didn't drill any holes with it. Good condition. Has grease, dirt& green paint on it. I'm including some sort of drill bit with a 3/4" drive socket welded on it that someone had made for some type of use. I don't know what though. Questions? Please ask. Normal 0 false false false MicrosoftInternetExplorer4 PAYPAL ONLY- PAYMENT DUE WITHIN 5 DAYS OF AUCTION END NO INTERNATIONAL SHIPPING* WELCOME* Most of our items are antique. Vintage and/or used treasures and should not be expected to be in perfect condition. We try to be accurate& truthful in our descriptions of each item we sell, so please ... moretake a careful look at the pictures& its description and please ask questions before bidding as it is our personal opinion of the condition of each item and may vary from yours. We try to provide plenty of pictures& describe to the best of our knowledge. We are not experts in any field& don't claim to be. By placing a bid you are the expert. If you have questions or are unsure of what is shown please ask questions before you bid. All items are used unless otherwise stated. Item(s) sold AS IS. Please don’t leave negative or neutral feedback because you did not read the ad listing carefully. Had buyer’s remorse or did not ask questions before bidding& buying. If there is a problem PLEASE CONTACT US and let’s see if we can work it out. We do our best to package items very well and very carefully to avoid breakage using lots of packaging& shipping material but sometimes breakage occurs anyway. Please save the box& all packaging/shipping material so that a claim can possible be made with the Postal Service. Shipping costs are determined by the item’s packaged weight. Size, ship to location& the shipping service/method used. Payment is due within 5 da
|
|
|
Chicago Pneumatic Reversable Air powered Drill - 1/2 keyless chuck - 500 RPM?
Up for sale is a Chicago Pneumatic Air/ Pneumatic drill. 1/2 in keyless chuck. Reversible. CP788HR. Works well and looks pretty good too. A few scratches and does have previous owner markings. Look over the pictures. I am a mechanic. I work on air tools, and have personally tested this tool! Drilled holes and all! Good strong drill! Around 500 to 600 RPM! I'm sure if you look hard enough you can find one cheaper but does it have a 30 day satisfaction guarantee? This one does! On all air tools. Not just the ones I sell, make sure you have the air supply needed to power them. As a minimum for decent power I recommend a 25 gallon tank and a 3/8 air hose. Most of the problems people report to me on impacts come down to this! They will work with a smaller system but not at their best. Understand this when bidding please. I stand behind what ... moreI sell. Returns are accepted! eBay is going toward immediate checkout. I have set up shipping discounts that automatically give you 50% off the shipping on additional items you may purchase. To get that discount. Simply put the items you want in your cart and check out all at once. Check out my other items. I have 100 or more air tools listed as well as hand tools. Etc. Check my feedback and bid with complete confidence! Payment is expected within 4 days. If you need longer I am easy to get along with as long as you communicate. I test each of these items before listing but I can't take them each to work for a week. If there is any issue please contact me before leaving feedback. Most likely we can work it out! My customers satisfaction and my standing with ebay are extremely important to me! I'm not happy until you are!
|
|
|
Jiffy 3/8 Aircraft Pneumatic air Drill 2700/D2
Jiffy 3/8 aircraft pneumatic air dill model 2700/d2 Item condition: used. Features: Jacobs 2B 0-3/8 Tho 3/8-24 chuck Sold As Is.
|
|
 |