1 Drive Impact Wrench 1 Impact Wrench 1 Inch Impact 1/2 Air Drill 16 Gauge Air Nailer 16 Gauge Stapler 3/4 Impact Wrench 90 Degree Drill 90 Drill Air Hose Reel 50 Air Impact Wrench 3 8 Air Nailers Air Needle Scaler Air Rivet Gun Air Rivet Tool Air Riveter Air Screwdriver Air Stapler Air Tool Accessory Kit Aircraft Gun Aircraft Rivets Aro Air Tools Aro Grinder Atlas Copco Air Tools Atlas Copco Drill Atlas Copco Pneumatic Bostitch Floor Nailer Bostitch Floor Stapler Bostitch Framing Bostitch Stapler Bucking Bar Cherry Max Chicago Pneumatic Gun Chicago Pneumatic Impact Wrench Chicago Pneumatic Rivet Clecos Coil Nailer Compression Riveter Crown Stapler Desoutter Dotco Air Tools Dotco Grinder Duo Fast Stapler Dynabrade Grinder Finish Stapler Floor Nailer Floor Stapler Flooring Nailer Flooring Stapler Frame Nailer Framing Air Nailers Framing Nailer Goodyear Air Hose Hardwood Floor Tools Hitachi Hitachi Framing Nailer Hitachi Nailer Huck 352 Huck Rivet Gun Impact Wrench 1 Inch Ingersoll Rand 1 Impact Ingersoll Rand Drill Ingersoll Rand Impact Wrench Inline Oiler Matco Impact Wrench Nail Gun Nails Nailer Nutrunner Palm Drill Palm Nailer Pneumatic Air Tools Pneumatic Chipping Hammer Pneumatic Drill Pneumatic Driver Pneumatic Grinder Pneumatic Rivet Gun Pneumatic Torque Wrench Pneumatic Wrench Pop Riveter Right Angle Die Grinder Rivet Bucking Bar Rivet Buster Rivet Set Rivet Set Tool Rivet Shaver Rivet Squeeze Rivet Squeezer Riveter Senco Senco Nailer Senco Pw Shear Wrench Siding Nailer Sioux Air Drill Sioux Air Tools Sioux Drill Sioux Grinder Sioux Tool Tool Uryu
 In 
 
Order by: 
Available to: 
Price: 
 - 
$
252.95
Buy It Now
$0 Shipping
Condition: New
Location: Warren,MI,USA
$
125
Buy It Now
$15.5 Shipping
Condition: Used
Location: Tampa,FL,USA
$
125
Buy It Now
$15.5 Shipping
Condition: Used
Location: Tampa,FL,USA
$
150
Buy It Now
$15.5 Shipping
Condition: Used
Location: Tampa,FL,USA
$
711
Buy It Now
$0 Shipping
Condition: New
Location: Grand Forks,ND,USA
$
174.95
Buy It Now
$0 Shipping
Condition: New
Location: Warren,MI,USA
$
125
Buy It Now
$20 Shipping
Condition: Used
Location: Tampa,FL,USA
$
150
Buy It Now
$20 Shipping
Condition: Used
Location: Tampa,FL,USA
$
125
Buy It Now
$15.5 Shipping
Condition: Used
Location: Tampa,FL,USA
$
43.63
Buy It Now
$0 Shipping
Condition: New
Location: Melville,NY,USA
$
115
Buy It Now
$20 Shipping
Condition: Used
Location: Tampa,FL,USA
$
80
Buy It Now
$20 Shipping
Condition: Used
Location: Tampa,FL,USA
$
100
Buy It Now
$20 Shipping
Condition: Used
Location: Tampa,FL,USA
$
30
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Bennington,KS,USA
$
80
Buy It Now
$15.5 Shipping
Condition: Used
Location: Tampa,FL,USA
$
80
Buy It Now
$15.5 Shipping
Condition: Used
Location: Tampa,FL,USA
$
80
Buy It Now
$15.5 Shipping
Condition: Used
Location: Tampa,FL,USA
$
710
Buy It Now
$0 Shipping
Condition: New
Location: Grand Forks,ND,USA
$
40
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Bennington,KS,USA
$
12.5
Buy It Now
$3.75 Shipping
Condition: New
Location: Canyon Lake,TX,USA
$
459.78
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
483.07
Buy It Now
$8 Shipping
Condition: New
Location: Farmingdale,NY,USA
$
125
Buy It Now
$20 Shipping
Condition: Used
Location: Tampa,FL,USA
$
20
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Bennington,KS,USA
$
12.5
Buy It Now
$3.75 Shipping
Condition: New
Location: Canyon Lake,TX,USA
$
406.85
Buy It Now
$8 Shipping
Condition: New
Location: Farmingdale,NY,USA
$
15.5
Buy It Now
$3.75 Shipping
Condition: New
Location: Bullhead City,AZ,USA
OEM Dotco part. Fits 0.6 HP motors. Price is for one set.
$
549
Buy It Now
$0 Shipping
Condition: New
Location: Thousand Oaks,CA,USA
$
150
Buy It Now
$15.5 Shipping
Condition: Used
Location: Tampa,FL,USA
$
80
Buy It Now
$20 Shipping
Condition: Used
Location: Tampa,FL,USA
$
10
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Bennington,KS,USA
$
239.99
Buy It Now
Free Shipping
Condition: Used
Location: Francis Creek,WI,USA
$
110
Buy It Now
$15.5 Shipping
Condition: Used
Location: Tampa,FL,USA
$
115
Buy It Now
$8.5 Shipping
Condition: New
Location: Riverside,CA,USA
$
23
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Dallas,TX,USA
$
20
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Bennington,KS,USA
$
80
Buy It Now
$15.5 Shipping
Condition: Used
Location: Tampa,FL,USA
$
329.99
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Corpus Christi,TX,USA
$
39.95
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Bennington,KS,USA
$
185
Buy It Now
$10 Shipping
Condition: Used
Location: Saint Paul,MN,USA
$
125
Buy It Now
$15.5 Shipping
Condition: Used
Location: Tampa,FL,USA
$
10
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Bennington,KS,USA
$
35
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Bennington,KS,USA
$
509.85
Buy It Now
$8 Shipping
Condition: New
Location: Farmingdale,NY,USA
$
561.2
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
509.85
Buy It Now
$8 Shipping
Condition: New
Location: Farmingdale,NY,USA
Dotco Right Angle Die Grinder Model 12LF281-36 Free Shipping USPS Priority Mail
$
125
Buy It Now
$20 Shipping
Condition: Used
Location: Tampa,FL,USA
$
422.96
Buy It Now
$0 Shipping
Condition: New
Location: Tinley Park,IL,USA
$
750
Buy It Now
Free Shipping
Condition: Used
Location: Apple Valley,CA,USA
DOTCO Right Angle Die Grinder#12L2718-36 18.000 rpm This used tool is in excellent condition. Runs good and strong. Former inventory ID numbers engraved ... moreon body. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-146e04e27ed-0x113-
$
80
Buy It Now
$15.5 Shipping
Condition: Used
Location: Tampa,FL,USA
$
125
Buy It Now
$15.5 Shipping
Condition: Used
Location: Tampa,FL,USA
$
125
Buy It Now
$20 Shipping
Condition: Used
Location: Tampa,FL,USA
$
300
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Milwaukee,WI,USA
Sioux Straight Die Grinder 25000 RPM Used in a good condition Please oil it with every use It is powerful No international shipping
$
278.1
Buy It Now
$8 Shipping
Condition: New
Location: Farmingdale,NY,USA
$
80
Buy It Now
$15.5 Shipping
Condition: Used
Location: Tampa,FL,USA
$
125
Buy It Now
$20 Shipping
Condition: Used
Location: Tampa,FL,USA
$
8.5
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Bennington,KS,USA
$
642.18
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
406.85
Buy It Now
$8 Shipping
Condition: New
Location: Farmingdale,NY,USA
$
12
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Bennington,KS,USA
1 2 3 4 5
 In 

Past Items  
 
For sale in this Listing is a Cooper Tools Dotco Pneumatic Air Die Grinder 1/4" 12L2580-01. Tested and fully functional. Has a couple of engravings which are pictured. Shows normal signs of wear from use not abuse. Listing is for tool only. No retail packaging or owners manual. Speed(RPM) 23.000 | Handle Type: Straight | Collet Size(Inch) 1/4 | Horsepower: 0.90 | Air Pressure(psi) 90.00 | Air Pressure(kPa) 620.53 We usually ship items within 1 business days after auction has been paid for. This Auction ships to lower 48 U.S. residents only. We will pay return shipping if the reason for the return was from an error in the listing that was the seller's mistake or if we ship the wrong item. If the return is for a reason other than a mistake by the seller. Then the buyer will be refunded the price of the item but not the original shipping ... morecharges and not the return shipping costs. If an item has free shipping either as a'Buy it Now' or'Auction' listing and it is returned buyer will be refunded original amount less our original shipping costs. If the error is our fault we will gladly cover all costs. Original and return. We over pack all items with packing material to ensure safe shipping. We sell hundreds of items and do our very best to describe items as accurately as possible. Please feel free to contact us with any questions.
DOTCO AIRCRAFT DIE GRINDER- 90 DEGREES 12.000 RPM. GRINDR BEEN TESTED AND IN A VERY POWERFUL WORKING CONDITION. JUST 5" LONG. WE SHIP TO USA ONLY. NO INTERNATIONAL. PLEASE SEE MY OTHER AIRCRAFT TOOLS. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1419af3531a-0x107-
DOTCO AIRCRAFT DIE GRINDER. 12.000 RPM. GRINDR BEEN TESTED AND IN A VERY GOOD WORKING CONDITION. WE SHIP TO USA ONLY. NO GLOBAL PLEASE SEE MY OTHER AIRCRAFT TOOLS.
DOTCO AIRCRAFT STRAIT DIE GRINDER& CUTTING TOOL. 30.000 RPM. JUST ABOUT 5" LONG. ITEM BEEN TESTED AND IN A VERY GOOD POWERFUL WORKING CONDITION. WE SELL TO 48 STATES ONLY. NO INTERNATIONAL SHIPPING.
◊◊◊◊◊ DOTCO ◊◊◊◊◊ 10R0401-18 Pneumatic Precision Pencil Grinder 60.000 RPM Speed(Variable) Straight Handle 1/8" Collet Size 0.1 Horsepower 90 PSI Air Pressure Rear Exhaust 1/8" Inlet Size NOTICE! NOTICE! NOTICE! There was a note from the original owner that said"Defective- 1 Week" The air hose had detached from the tool- I reconnected and it works great RETAILS OVER $558.00! FREE PRIORITY MAIL SHIPPING! THIS LISTING INCLUDES ONLY THE ITEMS SHOWN IN THE PICTURES Local pick up is always welcomed. Our goal is satisfied customers! If there is anything we can do. Please just ask.
Dotco 10R900008 100.000 RPM Turbine DIE Grinder Twist throttle. Variable speed, 0.06 HP, front exhaust with 1/8" collet and 7' air hose with filter When it comes to fine finishing applications such as die grinding or de-burring. No tools are better suited for the job than Dotco® grinders. Dotco's reputation for durability, dependability and versatility is among the highest for fine finishing applications. This is the result of years of continuous improvements in engineering design and manufacturing processes. Dotco grinders are designed with the operator in mind. They are small, lightweight and comfortable to use, without sacrificing durability. Plus, they incorporate elastomer coatings, and perfectly balanced moving parts to keep vibration to a minimum. This optimal combination of tool characteristics allows the operator ... moreto focus doing the best job possible, in the least amount of time. photos reveal it's minimal use. It operates smoothly, runs beautifully, looks beautiful. You have 7 days to test my claims of excellence. Buyer pays shipping back to me. Powered by The free listing tool. List your items fast and easy and manage your active items.
dotco cooper straight die grinder. 90 PSIC/ 6.1 BAR MAX 25000 RPM works excellent will ship as soon as payment is recieved.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-141c36809d2-0x104-
nice. Used tool here. Runs very strong. I am including a new Merritt insert and disc as well as tools. Tool has scratches, stains and writing on it, but no abuse at all. Thanks 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-141c36809df-0xf8-
Nice DotCo 3" right angle grinder used daily well maintained and rebuilt insides 3 months ago.
cleco cooper tools used air pneumatic die grinder sander. tool has 1/4 collet to mount all your popular accessories that are rated at 18.000 rpm which is its operating rpm. tool has rear exit exhaust to help keep cold air blowing away from operator and not into work area. safety on operating lever prevents accidental start up of tool. steel housing very durable no initials present however their are nicks and scrapes to housing which does not effect the tools performance which is legendary cleco tools are industrial usa made tools built to last and have the power output to accomplish all tasks thrown at it if your not aware of cleco cooper tools do some research they are very high end top of the line tools made for professionals who work with their hands save this one in your watch list bid now bid often don't let this one get away good ... moreluck thanks for looking and be sure to look at my other items for sale plus other georges renault and other air and hand tools. I only ship to continental united states by using usps services. I do combine shipping if buyer contacts me to verify items can be shipped together. If you would like item insured please let me know as this is extra. I do accept returns under one condition: that i sent an item to you that was clearly not as described in the items auction, in this case i will return costs of item not shipping costs. I only except paypal payments. Pictures in listings are of actual product being sold. This is a no reserve auction highest bidder wins. Items won must be paid for in seven days. Handling time from payment received to item being shipped with usps is 1-2 business days. Thank you and good luck!
Very nice dotco router head. Very nice condition. Looks to be hardly used has 7/16" button on top.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-141f04c02cf-0xf4-
1 each 20000 rpm dotco die grinder high speed. 1/4" collet. Mdl# 10L2081 Posted with eBay Mobile
Your looking at a DOTCO Precision Turbine Grinder Model 10L9500-36. It's rated at 80.000 RPM and has front exhaust. Has an 1/8" collet with 8' original airhose connected. This turbine grinder has only been ran a couple times so it runs like new. Very smooth running and spools up nicely. It does have a few minor scratches from storage in tool box as seen in pics. There are no id engravings on it anywhere. Comes as pictured with factory 7/16" and 11/16" wrenches. Please feel free to ask any questions if needed. This Dotco is in great used condition and runs flawlessly. You can feel the quality when you pull the trigger! What you see in pics is exactly what you will be receiving. Selling at a fraction of the cost of a new one. Thanks for looking and good luck! Returns are only available if item you receive doesn't ... morematch up with item pictured and description)
Dotco die grinder 90 degree. 20000 rpm comes with 2 inch arbor. Runs great and has no slake in the head gears! Oiled before every use. Has plenty of power and life left in this quality grinder. Ships next business after payment. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14200023bfc-0x106-
Dotco straight grinder with 47 Norton cut off wheels. Works GREAT! I am almost sure this is 20.000- 25,000 RPMS but sticker has fallen off.
TO ARNDTINC! WE ARE SELLERS WHO HAVE STARTED ANOTHER USERNAME TO SELL PARTICULAR ITEMS. OUR OTHER USERNAMES ARE"SKYNON" 1TO4" WE HAVE A COMBINED TOTAL OF OVER 30.000 POSITIVE FEEDBACKS, SO PLEASE BID ON OUR ITEMS WITH CONFIDENCE! THIS IS A PREVIOUSLY USED AIR TOOL BY DOTCO No. 10L1200B 1/4" AIR DIE GRINDER 90 DEGREE HEAD 12.000 RPM +(2) EXTRA DIE GRINDERS AS A BONUS: NO NAME 1/4" DIE GRINDER& CAMPBELL HAUSFELD DIE GRINDER(MISSING COLLET) COMES JUST AS PICTURED WORKS GREAT! NO RESERVE! WE WILL HAVE SEVERAL AUCTIONS RUNNING WITH QUALITY NAME BRAND TOOLS FOR THE NEXT SEVERAL MONTHS. SO PLEASE CHECK THEM OUT! WE WILL SHIP WORLDWIDE.
Cooper Tools DotCo Ergo 12L1281-36 Right Angle Grinder and Sander Model 12L1281-36 0.3 hp motor 20.000 rpm Rear exhaust Nearly new Cooper Tools DotCo Ergo Right Angle Grinder and Sander. It is 6 ¼ inches long. I don’t think it has ever been used. The grease tube has not been opened. There are two holders and two wrenches. Also included is the unopened tube of grease and the grease tube adapter. The original instructions are also included. I did some quick searching on-line and found that this model(12L1281-36) was replaced by model 12LF281-36. The new model sells for more than $600.00. So this item is a true value buy. It’s a great looking piece. Please take a good look at the pictures and you be the judge. I try to point out the downside the best I can. However I may miss something. If you are unsure what you’re bidding on please ask ... morequestions. Shipping to lower 48 USA. I combine shipping. Comments& Questions. Please Read! If there is a problem, regardless of type, e-mail me and I will try and resolve it with you. I do my best to describe each item accurately and my feedback indicates I usually succeed. You will always be bidding on the actual item shown in my pictures. Look at the pictures, and read the description. You are bidding on exactly what you see in the pictures. Again, take a good look at all the pictures(they describe the lot better than my words can) to see exactly what you are bidding on and judge the condition of the item for yourself. Please feel free to e-mail me if you have any questions on this item especially as it relates to its condition. Please ask now, not after you have won the item! Bidders Please Note the following: Payment via PayPal… Payment must be received within 5 days
Dotco 90 Degree Die Grinder 1/4" Collet RPM and Model Number cannot be read due to the previous owner removing engraving Condition Used but good running Has engraving removed from previous owner, Just the tool only. NO WRENCHES We have tried the best listing. Picture, and description, please take a look and read before bidding. What you see is what you get. Thanks. Shipping Shipping costs include shipping through USPS Priority Mail and Confirmation Number We do combine shipping We only ship to the lower 48 states of the United States NOTE: Shipping cost includes insurance and comfirmation number No International Bidding Payment PayPal is preferred. We do not accept personal checks Cash is accepted when requesting a local pick-up PLEASE make payments within 7 days of auction close! Returns We will accept returns 7 days after you receive ... moreyour order We will offer a full refund after we have received your item. Feedback Please take a short moment to give a positive feedback after successfully receiving orders We will return the favor Thank you for your business! BID WITH CONFIDENCE! CHECK OUT MY FEEDBACK RATING!
nice Ingersoll rand 302 grinder made in japan 1/4 collet 18 000 rpm used. Was tested and work great. please look carrefully at the pictures and ask questions before biding. what you see is what you will receive. i ship using post canada. buyer pay shipping fees. BUYERS ARE RESPONSIBLE FOR CUSTOM FEES OR RELATED FEES. payment is expected in five days from end of auction or item will be relisted. Thank you for looking and happy b.
DOTCO AIR PENCIL GRINDER 60.000 RPM MDL 10R0401-18 for DIES MOLDS GRINDING Info/Sizes: Excellent condition. I am selling two of these this week(see my other auction) Win both and I will give your FREE shipping(lower 48 states only) I do combine items to save you some cool cash. Do not pay however until you are done bidding and wait for my combined invoice. EASY RETURNS- You can return ANY tool if you are not happy with it. Email me for return shipping instructions. Keep in mind all tools are used. May be engraved or marked with the previous owners ID. There may be imperfections I miss. Buyer pays for return shipping. The 6" scale(if shown) if for reference only and not included in the auction unless stated otherwise. Payment due within 48 hours of auction close. If you are going to bid on other auctions contact me for a payment extension. ... moreForeign buyers are responsible for all import duties and taxes. Shipping costs do NOT included tracking or insurance for overseas shipping. I will be happy to send you a quote to have your shipment insured& tracked. Check out my other items! Click here to get notifications of future auctions favorites list! Mr. Art(ie) your best chance for a great deal on eBay. All tool auctions open at $1.00, never a reserve, and always a money back guarantee!
This is a used Dotco right angle die grinder. Great tool. This tool has been serviced and reconditioned by Portable Tool Service. Inc. 20.000 RPM max. 1/4" Collet(included) Front exhaust MADE IN THE USA-Hicksville Ohio.
VERY GOOD CONDITION DOTCO 23000 RPM Not much USE. MDL-12S2500-01 included NEW THREE CARB.END Cut-off wheels NEW
DOTCO EXTENDED IN-LINE DIE GRINDER MODEL# 10L2182C-01 1/4" COLLET 18.000 RPM 14" OVERALL LENGTH THIS USED TOOL RUNS GREAT AND IS IN GOOD USED CONDITION. FORMER INVENTORY CONTROL NUMBERS ARE ENGRAVED ON TOOL BODY
You are buying all three of these the small dotco angle grinder is model 10K1201b the large pcleco straight Grinder is model number 5rSA100 and the small ratchet does not have the plate on it with the model number but I was told it was a snap on it looks to be a good quality one all three of these needs some work I do not mess with air tools very much all I did was hook up an air hose and they did not work you're buying all three and as is condition free shipping in the US
These are used in good working condition free shipping in the US
Exhaust: rear, Free Speed: 20.000 RPM, Abrasives capacity: 1/2" carbide burr. 1" mounted wheel, Housing type: composite, Weight: 1.1 lbs. Head height: 2.7" Length: 6.6" Air inlet size: 1/4" Made in USA,
dotco router head. 5 for 126.00
Dotco grinder Mdl.12S2500-01RT RPM 23000 90 PSIG/B.1BAR MAX Collet:1/8.1/4.3/8 DOTCO MADE IN USA NEVER USED NEVER USED
Up for bids I have a good used Dotco high speed grinder. Below is a description of grinder. Model: 10L2786-80_REBUILT, Shipping Weight: 6lbs, 1 Units in Stock, Manufactured by: DOTCO, Specifications- Model, 10L2786-80, Spindle, 5/8" 11, Free Speed RPM, 1500, Weight, 4.6 lbs. 2.09 kgs. Length, 11 in. 279 mm Description: DOTCO 10L2786-80 Rebuilt Angle Grinder. 10- 27 Series Planetary Geared On Dec-25-13 at 18:34:32 PST. Seller added the following information: Hi I made a mistake it is 1500 RPM. Thanks.
Dotco Right Angle Grinder | 12L2252-01 | 11.000 RPM | 1/4" Collet hobby use only. 12-22 Series– 0.6 hp(0.45 kW) 200 Series Collet– Heavy Duty Head Specifications: Oilless blades: yes•Exhaust: side•Free Speed: 11,000 RPM•Abrasives capacity: 3/4" carbide burr, 2" mounted wheel•Housing type: composite•Weight: 3.2lbs. Head height: 3.9" Length: 9.3" Collet size: 1/4" Air inlet size: 1/4" Made in USA
One Dotco Die Grinder Model 12L-1200 36 12.000 RPM This grinder is in Great shape. It has been tested and is in great working order. Comes with wrenches. Items pictured are the ones you will receive. I combine shipping when possible. Thanks for looking. Powered by
Dotco Rt. Angle Grinder. 1/4 inch, 12000 rpm, mod# 12l 1280-36, made in USA
This air grinder works great. Used in my shop prior to going out of business. The grinder has some dust, dirt, scratches, and wear marks as illustrated in the pictures. Has a 1/4 inch chuck, and rated@ 12,000 RPM. Will remove the male air fitting prior to shipment and tape it to the unit. The grinder is approximately 13 inches long and the widest width is 2 1/2 inches. Weights approximately 4 1/4 pounds. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-1434682d646-0xfa-
Up for auctions is a Dotco#12LF280-36 90Degree grinder with a DMC Clean Air dust Shroud. Also comes with a Dynaswivel air inlet. Tool is very strong and runs very smoothly. I am including a small wrench as well. Tool is used with some minor stains and scratches and surface rust from sitting in storage. Nice tool all the way. Small cosmetic stuff.no abuse. Thanks
Dotco Angle Grinder 12L1201-36. Purchased with a tool kit and only used it a few times. Great condition. Only storage scuffs and scratches. No local pickup or international shipment. Paypal accepted. Fixed shipping $7.00. The Dotco 12L1201-36 right angle grinder is superb for a wide range of finishing and deburring applications. Hp=.3(22kw) Front exhaust, 20,000 RPM Abrasive capacity=1/2" Carbide Bur, 1" Mtd. wheel. Weight=1.1lb, OAL=6.3" 1/4" air inlet, uses 300 series collet=1/4" composite housing. Standard equipment: applicable collet,collet wrench, PN 12L1201-36 made in USA. Thanks!
Nice used Dotco in line grinder up for auction. Model# 12L2802-01{I believe} 6 hp 18,000 rpm. Please see my other auctions for more great deals on Quality tools. Thanks and happy bidding
Dotco pneumatic die grinder Model 10-1010; 20.000 rpm; 1/4" collet Used. Good functional condition Buyer pays shipping Accept Paypal
Dotco Pencil Grinder. Pneumatic Air Tool Please see the picture for details. There is only a number 6 or 9 that I can read. So I'm' not sure of the RPMs. But you may be able to tell. Good clean working condition. Its a workhorse! It measures about 16 inches long. Weight is about 4 pounds packed. But we will only charge for 2-3 lbs and send flat rate. Handling is FREE! Packing Materials are FREE! Insurance is included for FREE! Please take a good look at the pictures provided. They include ruler and close ups of all angles. I have many more. So please just ask. WE are Honored to ship to any U.S. Military base. Worlwide, or APO Addresses WE go by the old school USMC Code of Honor. We don't like junk. And we wouldn't offer it to you! 100% satisfaction guarantee. 14 day"Hassle Free Returns" Just a click of a button! ... moreRefunds given upon receipt of item with security tag in place. No"after purchase" discounts. We ship within 24 hrs of receiving payment. Please pay within 24 hours of winning auction. 1 day. Overnight shipping available. Immediate Pick Offered at: Monty's Electric. Inc in Baldwin Park, CA 91706 Questions welcomed. We respond ASAP! Every buyer gets a MyStoreRewards invitation for cash back
DOTCO INLINE AIR GRINDER/MOTOR. 25.000 RPM. ADJUSTABLE CHUCK AND SPEED. WORKS GREAT. SLIGHT WARE. SOLD AS IS. THANK YOU
Nice. Used tools here. I see stains and scratches from previous usage, chipped paint, and surface rust that I wire-brushed off. There is a small tear in the rope cover over the rubber air line as seen 2nd picture, but the air line is not damaged. Both tools run very strong and smoothly when hooked to air. Auction includes: 1) Pencil grinder model# 10R9000B-08 and(1) angle grinder model# 10L1200G36. Thanks and enjoy bidding.
We have a Dotco 10L1200B36 90 degree 12.000rpm 1/4"x28 threaded grinder up for auction. It will accept threaded drill bit or a threaded collet chuck. I will throw in a hand full of drill bits. Very good working cond. Please see my other auctions for more great deals on Quality tools. Thanks and happy bidding
Up for auction we have a Pre-Owned Dotco 10L2000-01 Inline Pneumatic Grinder 20.000 rpm 1/4" Collet. This is USA made. The Grinder is in Very Good Workiing Condition. It has some letters and numbers etched in the side of the grinder from the previous owner. Otherwise, the grinder shows normal use/ ware on it from normal light use and storage. This comes exactly as shown in the pictures. Please take a good look at the pictures to judge the actual condition& contents and bid accordingly. We Will guarantee this item to be in Great Working Order. Feel free to ask any questions you may have. Please check out our other Automotive Tool/ Hand Tool/ Aviator Tool auctions. Combined shipping available. Shipping and handling will be $8.95 within the United States. Colorado residents will be required to pay 7.4% sales tax. Thanks for looking ... moreat our auctions! Stop Drop& Shop 3920 N. Academy Blvd. Colorado Springs. CO 80917(719) 203-6685 We are Colorado Springs only Registered eBay Drop Off Location! Please contact us for all of your Trading Assistant needs. WM Powered by The free listing tool. List your items fast and easy and manage your active items.
Dotco 90 Degree 80000 RPM Pencil Grinder 12-R0380-18 1/8" Collet This Dotco 90 degree grinder was purchased new from Cooper Ind. several years ago and only used 2 or 3 times. It has been oiled after each use and then put in a drawer in my tool box. This is an 80.000 rpm grinder with an 1/8" collet and comes in the original box with the paper work and wrenches. By Apex Tool Group, Lexington, South Carolina, U.S.A. AS SHOWN. Each item is described as accurately as possible. Noting any characteristic that might affect value. Browse my listings for more great savings including the best machinist and metalworking tools made. Such as Starrett, Mitutoyo, Brown& Sharpe, Interapid, SPI, Fowler and Lufkin. I acquire inventory from local auctions. Estates, surplus, or overstock. I can not guarantee that any item is smoke or pet-free. Limited ... morequantities are available. Vintage or used products may show the typical signs of prior ownership. Please read the terms below. If you have questions or need assistance. Please don't hesitate to ask. Your satisfaction is important to me. PAYMENT Payment is expected within 3 days of purchase. If there will be a delay in payment. Please let me know. SHIPPING Please check the Shipping Tab for complete fees and service options. Your order will be carefully packaged to safely arrive in the same condition as when shipped. And insured against loss or damage. Standard shipping is by UPS Ground, First Class or Priority Mail- depending on size, weight, value, and destination. Any fees include packaging. Handling and tracking or delivery confirmation. NO hidden fees. I am happy to combine shipping for multiple items purchased within a few days time frame. Kindly request an invoice when you are ready to complete your order. And any applicable shipping charges will be adjusted accordingly. AFTER THE SALE Service NEVER ends when your order has been shipped. Shipping information. Including the carrier and tracking number or Customs Number will be sent to your ebay registered email add
Up for your consideration is a used but in great shape cosmetically and functionally Dotco 65.000 RPM turbine pencil grinder. It has a 1/8" collet and two craftsman wrenches to tighten and loosen collet. Any questions feel free to ask and I'll do my best to answer. This was an estate auction find so i am not sure but it looks to not have much use. Thanks for looking. Description below. The Dotco Precision Grinder. 12R9180-08, is a top quality tool, which is suitable for assembly-line work. TheDotco 12R9180-08 air controlled turbine grinder is designed for a wide range of precision finishing and deburring applications. The Dotco pneumatic die grinderis made in the USA by Cooper Power Tools, an ISO 9001 certified facility. Dotco's reputation for durability, dependability, and versatility is among the highest for fine finishing ... moreapplications. Dotco air controlled precision turbine grinders are small, lightweight, and comfortable to use. With elastomer coatings and perfectly balanced moving parts, Dotco pneumatic precision grinders keep vibration to a minimum, which allows the operator to focus on doing the best job possible, in the least amount of time. The 12R9180-08 Pneumatic Turbine Grinder features an ergonomic housing, which fits the hand comfortably and guards the collet area. A patent pending governed design allows the Dotco Precision Turbine to idle for long life but provides full power under load. 0.1 HP 65.000 RPM GovernedCapacity: 1/8" Carbide Bur. 1/8" Diamond PinComposite HousingWeight: 0.4 lbs.1/8" NPT- Use 3/16" I.D. Hose
Model Number 12L1281-36 1/4" Collet.3HP Ergonomic 20.000 RPM Rear Exhaust. Used tool but works perfect. Not even a year only.
Up for sale today is a Dotco Right Angle Die Grinder. 100% working order Shows signs of use. But still a work horse. Comes with everything shown in picture Please view all pictures. And ask any questions before bidding/purchasing. Thank You NO RETURNS/REFUNDS! If you have a feedback score of 5 or less. Or are new to eBay, please contact us before buying any of our items. IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO CONTACT US THROUGH: eBay MESSAGES ONLY! NO INT ERN ATI ON AL SHI PPI NG! We only ship to the continental 48 states. ALL PAYMENTS MUST BE COMPLETED WITHIN 3 DAYS OF PURCHASE. ANY ITEMS LEFT UNPAID WITHOUT COMMUNICATION WILL BE RE-LISTED ON THE 4TH DAY* FEEDBACK PLEASE LEAVE POSITIVE FEEDBACK FOR US AFTER YOU RECEIVE YOUR PURCHASE. IF FOR ANY REASON YOU ARE UNHAPPY WITH YOUR PURCHASE PLEASE CONTACT US IMMEDIATELY SO WE MAY RESOLVE ... moreTHE ISSUE BEFORE YOU LEAVE NEGATIVE FEEDBACK. WE WILL DO OUR BEST TO MAKE SURE YOU ARE A SATISFIED CUSTOMER!
You are bidding on a Dotco 90 degree die grinder. This tool is in good working condition. Model 12L1281-32. Exhaust Type: Rear. RPM: 20,000, Collet/Thread: 1/4"28 Internal Thread.
Nice. Used tool here. Runs strong on air. I see stains, scratches and grind marks. Small cosmetic stuff.no abuse. Comes with a swivel air intake attachment. Thanks
You are bidding on a Dotco router/ cutt off wheel. Model# 12L2560-01. 23000RPM. This tool is in excellent working condition. There are marks on the tool from the previous owner. Excellent tool! Good luck and enjoy!
This Dotco grinder is in great shape and was used very little.Works great. Posted with
Used Dotco model 10r9000-08 works good 100.000 RPM just dont have the need for it anymore. Posted with
Model Number Breakdown: 12- Ergo Grinder/Sander S- Locking Lever 1- 0.3HP 1- Straight. Extended 01- Front Exhaust. 5" Extended, 28,000 RPM Item is in good working condition. Comes with bit.
DOTCO Turbine Grinder. 65.000 rpm. DOTCO part# 12R9180-48 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-143cca857e2-0xf9-
Cleco Pneumatic right angle grinder model 116GLF-135RAB-W. 116 series(0.6HP) 13.500 RPM Wheel Size: 4" Seel Gaurd I tested the grinder and it works great. This is a very high quality USA made grinder intended for assembly line use so it will last a lifetime. The original cost was over $700 buy it here to save some money! The exact grinder in the picture is the one you will be receiving. Please ask any questions before purchasing. Check out my other listings. Thanks for looking!
This listing is for the Dotco Die Grinder shown in the attached photos. Unit has been rebuilt with new parts as needed. As part of the rebuild process. This grinder was completely disassembled and cleaned/ degreased. Functional parts replacement includes new rotor blades. Front/ rear bearings and lock-ring thread guard. Before reassembly. The aluminum body and throttle lever were polished. Fully tested. Performs as new. Spindle is tight and quiet. Includes 1/8” collet shown. Own for a fraction of new price. Specs as Follows: Made in USA-34.000rpm-0.3hp(22kw) Rear Exhaust– Can be equipped with 45-19xx exhaust overhose-7lb(3kg) tool weight-300da Collet Chuck(1/4” max collet capacity) ½” Max Carbide Burr Capacity-1” Max Mounted Wheel Capacity Thanks for looking. Email questions. Winning bidder to pay within five(5) days of auction close. ... moreFree shipping to continental United States only. Normal 0 false false false EN-US X-NONE X-NONE
Dotco 90 Degree Pencil Grinder 80.000 RPM Model# 12-R0380-18 1/8" Collet This Dotco 90 degree grinder was purchased new from Cooper Industries a few years ago and used lightly only 2 or 3 times. It has been oiled after each use and kept in the original box in a drawer in my tool box. This is an 80.000 rpm grinder with an 1/8" collet and comes in the original box with the paper work and wrenches. By Apex Tool Group, Lexington, South Carolina, U.S.A. AS SHOWN. Each item is described as accurately as possible. Noting any characteristic that might affect value. Browse my listings for more great savings including the best machinist and metalworking tools made. Such as Starrett, Mitutoyo, Brown& Sharpe, Interapid, SPI, Fowler and Lufkin. I acquire inventory from local auctions. Estates, surplus, or overstock. I can not guarantee that ... moreany item is smoke or pet-free. Limited quantities are available. Vintage or used products may show the typical signs of prior ownership. Please read the terms below. If you have questions or need assistance. Please don't hesitate to ask. Your satisfaction is important to me. PAYMENT Payment is expected within 3 days of purchase. If there will be a delay in payment. Please let me know. SHIPPING Please check the Shipping Tab for complete fees and service options. Your order will be carefully packaged to safely arrive in the same condition as when shipped. And insured against loss or damage. Standard shipping is by UPS Ground, First Class or Priority Mail- depending on size, weight, value, and destination. Any fees include packaging. Handling and tracking or delivery confirmation. NO hidden fees. I am happy to combine shipping for multiple items purchased within a few days time frame. Kindly request an invoice when you are ready to complete your order. And any applicable shipping charges will be adjusted accordingly. AFTER THE SALE Service NEVER ends when your order has been shipped. Shipping information. Including the carrier and tracking number or Customs Number will be se
Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Dotco 10L1281 Rear-Exhaust Right-Angle Air Grinder Set Lot 20.000 RPM- Like new. 1/4" collet in it now; comes with 1/8" collet too; lubricator; wrenches. Please ask any questions you may have before bidding. I am listing items for a friend who had his own machine shop. I know nothing about the items. But will do my best to answer your questions. Please look closely at the photos for condition. Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Questions on items- If you have any questions. Please ask before bidding. I check my account regularly when I have listings. Smoke– All items are from a smoke free environment. If I happen to purchase something from a sale that has a smoke odor. I'll ... moremention that in the listing. Pets– None in my home. Please notify me within two days of receipt of item if you need to return it. Shipping– I try to ship within two days of receiving your payment. I generally ship using United States Postal Service. I estimate shipping charges using the UPS calculator and add a small amount to help cover the cost of packaging tape and padded envelopes. Boxes I usually get for free. I’ll combine shipping charges upon request. Satisfaction– Please let me know if you are not satisfied with your purchase. I try to describe the items accurately. But there’s a chance I might miss a flaw. Normal 0 false false false EN-US X-NONE X-NONE.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-143d2488782-0xff-
Dotco 20000 RPM die grinder. MDL# 10L1201G36. 1/4 collet. Good condition. Normal usage wear. Posted with eBay Mobile Posted with
Dotco 12000 RPM die grinder. MDL# 12LF280-36. 1/4 collet. Good condition. Normal usage wear. Posted with eBay Mobile Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-143d24887b1-0xf4-
Dotco 20000 RPM die grinder. MDL# 12L1201-36. 1/4 collet. Good condition. Normal usage wear. Posted with eBay Mobile Posted with
Dotco 20000 RPM die grinder. MDL# 12L1281-36. 1/4 collet. Good condition. Normal usage wear. Posted with
YOU ARE BIDDING ON A DOTCO 10L1080-36. THIS HAS BEEN TESTED RIGHT BEFORE I LISTED, AN WORKS 100 PERCENT, IF YOUR LOOKING FOR A NEW ONE, THIS AINT IT, NOR IS THE PRICE, IF YOUR LOOKING FOR A GREAT TOOL THATS READY TO BE ABUSED THIS IS THE ONE, AGAIN WORKS 100% FREE SHIPPING, INSURANCE I HIGHLY RECOMMEND, I AM NOT RESPONSIBLE FOR ANY BUSTED ITEMS THAT THE POST OFFICE SHIPS, SO I HIGHLY RECOMMEND YOU BUY INSURANCE WHICH WILL BE $5.00. PLEASE ALLOW 2 DAYS HANDLING, THANK YOU AN BEST OF LUCK! 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-143d7102e20-0xf0-
Very Nice Dotco pneumatic grinder. SN 844384. Still has most of the original finish and labels. Tested. Spins smoothly. Very fast and quiet!
Click thumbs to Enlarge Any additional photos will be below This grinder is previously owned and in good working condition. It has a few scuffs and scrapes. But remains fully functional and ready for inclusion in a new tool kit. Thanks, and happy bidding. Please see pictures. Pictures shown are of the actual item(s) you are bidding on. Auction includes: Dotco 15LF281-42 Grinder, SKU: 1/22f3-232-002124-ps Checkout: After the auction has ended please click the checkout button to proceed with your payment. Payments: Payments must be received within 3 days. Unpaid cases will automatically be open by eBay 7 days after purchase. Please note. If you enter the wrong billing address your card will be declined. Taxes: 7.125% Sales Tax to Minnesota buyers. All Emails and Invoices will be sent to your registered eBay Email Address. If you are not receiving ... moreour emails please check your email spam filters. We Ship to confirmed addresses only! Make any changes to your address before paying. All items will be shipped to your confirmed billing address after payment. We will not accept changes after payment! We Ship to the Continental US ONLY! Please contact us on APO/FPO Shipping. These will cost more. We no longer ship to Hawaii. Shipping Carriers: UPS& USPS 1-6 Day. Local Pickups: $5 Per item handling fee. Contact us for details. We offer a 14 Day Money Back Guarantee unless noted"As Is" We do our very best to accurately describe our items. However If you have any problems please contact us within 14 days of delivery. Operating Hours: M-F 9:30am- 5:30PM Central Standard Time Is there a Buyitnow? We do not offer Buyitnows. Will you ship to this country or this country? We ship to the US only. What is the history of the item? Most of our items are used and we do not know the history. We test them and picture their current condition. What's Included? 99% of the time If it's pictured it's included. Please also read"Auction Includes" Inkfrog terapeak. I000000. InkFrog Analytics.
We are selling this previously used Dotco Model 12L 2500. This Grinder is in excellent condition. Please let us know you if you any further questions. Good luck with the bidding. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-143ebf8e53b-0xeb-
Up for auction is this DOTCO 90 degree model# 15L1200 12000 RPM grinder w/chuck. This is a 12000 RPM angle grinder that has a 0- 5/32 inch(0-4mm) chuck and is in used condition as shown. It has been tested and is in good working condition. Please read before agreeing to purchase from off_trac We do not ship to A.P.O. F.P.O. addresses, please make sure you have an accessible residence or business address. In addition. We do not ship to Alaska, Hawaii, Guam, or Puerto Rico residents. eBay Feedback Feedback will be given in return for your feedback. Your satisfaction is important to us. If you do not feel comfortable giving us a 5-star positive feedback rating, please contact us before leaving any feedback so that we can make things right. Payment All payments are expected within 3 days of auction closing. If payment cannot be made within that ... moretime period you must contact me and make arrangements before bidding. Shipping Shipping to US ONLY NO INTERNATIONAL SHIPPING, THIS INCLUDES MEXICO AND CANADA We do not ship to A.P.O. F.P.O. addresses, please make sure you have an accessible residence or business address. In addition. We do not ship to Alaska, Hawaii, Guam, or Puerto Rico residents. All orders will ship out within 2 business days(usually 24 hours) from date payment is received. I will gladly combine shipping. E-mail and let me know you’re still bidding and then again when you are finished(3 day’s max. I will then send an adjusted invoice. All auctions that are closed on a Friday. Weekends or any Post Office holidays will not be processed until the next working day. This means if you make a payment on Friday and the following Monday is a holiday observed by the USPS. Your parcel will ship on Tuesday. Terms of Sale Please ask any questions BEFORE BIDDING. I will try to answer all emails in a timely manner but if you wait until the last day it’s possible I may not have a chance to respond to it. Descriptions of items are accurate to the best of my ability and all sales are final unless otherwise noted. Ma
Dotco 20000 RPM die grinder. MDL# 12LF281-36. It is in good condition showing only normal wear
DOTCO" Air Pencil Grinder. MDL# 10R 0401 18- 60,000 rpm, Great Condition Up for Auction is a"Dotco" Industrial Pencil Grinder. Model# 10R 0401 18, 60,000 rpm, 90 psi, made in Hicksville, Ohio, USA. 66" overall length. Seem's to be in great condition. Acquired from an Estate sale with other Dotco air tool's which I will also be listing for auction. I was told that all the air tool's are in working condition. Please view the photo's and use your own judgement for authenticity. They are an important part of the description. Please ask questions if unsure. I am not a photographer and do not have high end equipment to take perfect pictures. Thanks and Good luck bidding. I ONLY SHIP TO THE UNITED STATES. I"DO NOT" SHIP INTERNATIONAL. DON'T BID IF YOU ARE NOT FROM THE U.S. your bid will be retracted)
Dotco air turbine capable of 100.000 rpm's. has an 1/8" collet and wrenches are the nice and heavy ones. Hooked up to 90psi without a bit in it and sounded real good. When it kicked in the turbines she would whistle. Posted with
Bidding on a Dotco Straight Die Grinder. Model 10L2005-01. This item is used but fully operational. All of my items are guaranteed. Please do not hesitate to contact me with any questions or concerns. If the buyer decides to return the item. They are responsible for return shipping. Thanks for looking and happy bidding. NO RESERVE Posted with
Very nice Dotco right angle grinder. Works excellent! Has 4' muffled exhaust. Their is a name engraved in the housing. Good deal on a great grinder. Posted with eBay Mobile
DOTCO Grinder MDL: 12S1201-36B2 20000 RPM 90 PSIG/6.1 BAR MAX MADE IN USA PERFECT CONDYCIA NEVER USED.
The grinder is used and shows some normal wear but still in good working condition. Shipping international will be additional cost.
Heavy Duty Dotco 7" Right Angle Sander MFR# 10L4206-80 Aircraft Grinder Sander Polisher 90 degree 6000 rpm@90psig max. Made in USA, Hicksville Ohio, a $1250.00 tool at new price, search mfr# Exhaust Holes Rotate Around 360 Deg. tool weight is 6.43 lbs, total length 16.5 inches. I do not feel any end play in angle head, sounds good under air pressure, has good torque!
Greetings. You are bidding on a great estate find from a retired machinist. Its a Dotco extension hand grinder. This is being sold for parts or repair only. The spindle is locked up and not turning. All of the numbers are worn off so I can't even tell you the mod. number or rpms! I'm sure if the bearing were replaced and a little tlc is applied this would be an awesome tool at a great price! What is pictured is what you will receive. No tools or box is supplied. Shipping to be in a flat rate box! Fixed shipping price for the USA states only. NO OUT OF THE COUNTRY SHIPPING! THIS MEANS CANADA TOO! Yes I combine shipping. I'll put as much as I can into this one size flat rate box. Other wise I'll may need to go up to the next biggest size. Please email any questions before bidding. Good luck! Payment is expected within 3 business ... moredays or item will be relisted!
Dotco heavy duty right angle sander grinder. Good used tool for sanding and grinding for sale
You are bidding on a Dotco Large Inline Cut off Wheel. It is 1hp and 18.000 rpm's. Model 10L4018. This grinder is in excellent working condition. It is an awesome tool for auto work or aviation work or whatever your need is. It cuts easily through all types of metals. Good luck and enjoy!
UP FOR BID IS A WORKING DOTCO 12000 RPM DIE GRINDER USA SHIPPING ONLY TERMS OF SALE AGREEMENT WE SELL ALL OF OUR ITEMS AS-IS.ALL ITEMS COME AS PICTURED ONLY.MOST OF OUR ITEMS ARE USED SO THERE IS NO WARRANTY EXPRESSED OR IMPLIED ON ANY ITEM WHATSOEVER MOST OF THE ITEMS COMES FROM WORKING INVIROMENTS.THAT HAS RECENTLTY CLOSED OR LIQUIDATING SOME OF THERE EXCESS ITEMS.ITS UP TO YOU TO DECIDE IF THIS IS THE RIGHT EQUIPMENT FOR YOUR LOCATION AND USE.WITH YOUR YOU ARE AGREEING TO ALL ABOVE TERMS.THANK YOU
Dotco pencil grinder 10R9000-08. 100000 RPM 1/8 collet Used but in excellent condition ALL PAYMENT MUST MADE THROUGH PAYPAL. ITEM WILL SHIP OUT WITHIN 1 BUSINESS DAY WHEN ALL PAYMENT IS CLEARED UP. THANK YOU FOR LOOKING/ VISITING MY PAGE
DOTCO Right Angle Grinder 12L2252-01.11000R VERY GOOD TOOL Used but in excellent condition. ALL PAYMENT MUST MADE THROUGH PAYPAL. ITEM WILL SHIP OUT WITHIN 1 BUSINESS DAY WHEN ALL PAYMENT IS CLEARED UP. THANK YOU FOR LOOKING/ VISITING MY PAGE. PM. 1/4 Collet
This item is a slightly used 60.000 RPM Die Grinder. It has a 1/8" collet and rear exhaust. Very nice grinder in excellent condition.
DOTCO 12R0410-18 PNEUMATIC PRECISION 60.000 RPM PENCIL GRINDER-DOTCO MODEL 12R0410-18 PNEUMATIC PENCIL GRINDER-RPM: 60.000-MOTOR RUNS GOOD-THIS TOOL IS MILITARY SURPLUS AND HAS A BLACK MARKER SPOT COVERING A NUMBER(cosmetic) COMES EXACTLY AS PICTURED-SEE ALL PICTURES GREAT FIND! di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-1441492f3fa-0xfc-
Up for auctions is a Dotco#10L1200G36 90 Degree grinders with an attachment Tool runs very strong. Tool is used with some stains. Grind mark, scratches. Thanks
Dotco mini grinder. HAD TO PAINT IT, SO I COULD KEEP MY EYE ON IT, some of them just seem to walk away for some reason, anyway, this one, although painted is in great shape, the paper sticker is still on the front on it. used very little, you will be glad to get it.thanks.
Hello. You are bidding on a used Dotco Air Pencil Grinder with a 1/8" collet& 60,000 RPM Model: 12R0410-18 S/N: 884066 What is in the pictures is what you will receive. Pencil grinder is in excellent working condition Pick up is okay. I am Located in North Hollywood. Free Shipping. CA Sales Tax to California Residents. Only Paypal(Cash OK If Pick up) Also please feel free to check out my other listings. As I have more Items for sale. Thank you and Happy Bidding! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B4g7%3E-144225f3a66-0xe6-
Here is a Dotco 15LS282-62 Right Angle Grinder. Drill. It spools up quickly and quietly. I am sure it has seen little use as the color is good and most of the original decals still exist.It needs the head rebuilt or replaced to be fine.
Up for auction is a Dotco straight die grinder# 10L2081C. Turns great at 20,000RPM. Has 1/8" collett. Item does have some previous owners engravings on it. I do combine shipping. Buyers using the International Shipping Program are eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items for sale!
Your looking at a Dotco Inline Grinder Model: 10K1000XA-36. Its rated at 30.000 RPM and has front exhaust. Has a 1/4" collet. Runs great with no issues. Cosmetically its in good shape for a used tool with only 2 sanded marks on body as seen in pictures. Comes with 5 new cut off wheels and arbor. What you see pictured is exactly what you will receive. Please feel free to ask any questions if needed. Thanks for looking and good luck!
DOTCO AIR TOOL PENCIL GRINDER MODEL 10R0400-18- EXCELLENT USED CONDITION- 6000 RPM- 1/8" COLLET- WRENCHES INCLUDED- OWNERS NAME ENGRAVED ON TOOL g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-1443d49c818-0xda-