Nose Assy Air Hydraulic Rivet Gun Nose Assembly Pneumatic Alligator Rivet Pulling Head Air Hydraulic Rivet Huck 353 Air Hydraulic Riveter Rivet Gun Rivet Cherrymax Bucking Bar Aircraft Piece Rivet Rivet Squeeze Emhart Pneumatic Rivet Puller Pneumatic Pop Rivet Gun 4X Rivet Gun Offset Rivet Air Pop Rivet Chicago Pneumatic Rivet Gun Ati Snap 1 8 Rivet Hydraulic Rivet Gun Blind Rivet Rivet Set 401 Shank Fsi D-100 Pneumatic Rivet Squeezer Textron Cherrymax Rivet Gun Nose Chicago Pneumatic Alligator Offset Rivet Set Compression Rivet Jiffy Uat Pneumatic Pop Rivet Emhart Pop Huck 352 3X Rivet Gun Rivet Gun Model Industrial Rivet Pneumatic Squeezer Huck 99 Rivet Fastener Rivet Gun Set Cherry Textron Avdel Cherry Max Squeezer Aircraft 8 Rivet Set Flush Rivet Set Ati Snap-On Rivet Set 1 Rivet Hammer Cherry Pneumatic Hydraulic Rivet Ati Snap On Tools Bucking Bar 3 16 Rivet 1 4 Rivet Aircraft Tools Snap 3 16 Rivet Set Pneumatic Compression Rivet Pneumatic Hydraulic Rivet Alligator Rivet Cherry Rivet Rivet Gun Air Hammer 401 Shank 5 32 Rivet Set Yoke Rivet Blind Rivet Gun Cherry Riveter Rivet Machine Sheet Metal Rivet Rivet Gun Aircraft Tools Pneumatic Rivet Hammer Riveter Machine Rivet Gun Kit Huck Rivet Gun Aircraft Tools Chicago Pneumatic Aircraft Rivet Sets Aircraft Tools Cleco Pop Rivet Gun Huck Nose Piece Rivet Set Lockbolt Nose Assy Cherrymax Pneumatic Aircraft Tools 2 Hand Rivet Chicago Pneumatic Rivet Aircraft Tools Ingersoll Rand Pulling Head Gage Bilt Pneumatic Blind Heavy Duty Rivet Aircraft Tools 5 16 Nose Rivet Model Cherry Rivet Gun Cherrylock Blind Fastener Tungsten Bucking Bar Cherrymax Huck Pneumatic Aircraft Rivet Huck 200 Aircraft Tools 7 2X Rivet Gun Olympic Allfast Aircraft Tools Atlas Copco Dayton Pneumatic Aircraft Tools Aro Aircraft Tools Jiffy Rivet Nut Rivnut Tool Chicago Pneumatic 4X Rivet Gun Pneumatic Air Rivet Gun Rivet Squeezer Aircraft Tools Apt Pop Rivetool Aircraft Tools Dotco Pop Rivet Pneumatic Hydraulic Rivet Gun Tools Ingersoll Rand Avc Tools Bucking Bar Huck Rivet Rivet Puller Gun Aircraft Tools 10 Huck Gun Roller Ratchet Aircraft Aviation Tools Aircraft Tools 8 Aircraft Sheet Metal Tools Riveting Machine Pneumatic Air Rivet Cp-214 Rivet Pneumatic Rivet Puller Cp 351 Rivet Set 498 Shank 1 4 Nose Huck 2025 Roller Ratchet Aircraft Tools Aircraft Tools Sioux Rivet Pulling Head Nose Cherry Max Rivet Cleco Runner Chicago Pneumatic Cp Hi Shear Nose Piece Aircraft Hydraulic Blind Rivet 3 16 Air Head Aircraft Pneudraulic Rivet Cherry G784 Aircraft Tools 4 Offset Rivet Pulling Head Nose Piece Aircraft Tools 3 Fsi Chicago Pneumatic Cp214 Rivet Shaver Alligator Squeezer American Pneumatic Jiffy Uat 5 Tools Huck Countersink Cages Cupped Rivet Set Aircraft Tools Rockwell Pneumatic Lockbolt Fastener Installation Textron Aerospace Aircraft Rivet Gun Straight Pulling Head 9 32 Nut Runner Collar Runner Prg 510 Fsi Pt-100 Hydraulic Pop Rivet Aircraft Tools 4 Pc Rivet Bucking Bar Aircraft Tools 1 Ati Snap On Tools 3 United Air Tools Air Rivet Gun Prg 510 Pneumatic Right Angle Pulling Head Electric Rivet Gp Lockbolt Rivet Gun Aircraft Rivit Gun Cherrylock Rivet Rivet Set Air Riveter Huck 200 Rivet Tools 5 32 Jiffy Air Tools Emhart Teknologies Angle Rivet Hi Lok Collar Bucking Bar Set Avc 13 Hi Lok 1X Rivet Cherry Textron Aerospace
 In 
 
Order by: 
Available to: 
Price: 
 - 
$
29.95
Buy It Now
$0 Shipping
Condition: New
Location: Calhoun,GA,USA
$
51.7
Buy It Now
Free Shipping
Condition: Used
Location: Venice,FL,USA
$
395
Buy It Now
$0 Shipping
Condition: Used
Location: Crestview,FL,USA
$
1,693.22
Buy It Now
$0 Shipping
Condition: New
Location: Marble Falls,TX,USA
$
129.88
Buy It Now
$20 Shipping
Condition: New
Location: China
$
30.98
Buy It Now
$0 Shipping
Condition: New
Location: El Monte,CA,USA
$
20
Buy It Now
$8 Shipping
Condition: New
Location: Riverdale,GA,USA
$
22.55
Buy It Now
$10 Shipping
Condition: Used
Location: Westerville,OH,USA
$
176.99
Buy It Now
$0 Shipping
Condition: Used
Location: Ventura,CA,USA
$
32.64
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Long Beach,CA,USA
$
68.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
Riv Nut Rivet-Nut 3/8-24 wrench style Tool This simple and easy to use tool is excellent for pulling riv-nuts. Simply hold the body with a wrench and ... moreturn the pull-up stud with the supplied allen wrench. This wrench style will also let you apply more pulling force than is generally available from lever type riv-nut tools. Made of High Quailty Steel Size 3/8-24 Additional sizes available 440. 632, 832, 1032, 1024, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 1/2-13 and 1/2-20 sizes. Please email with questions. We offer expert advice on all Cherry. Huck, GBP, Hi-Lok, Hi-Shear, etc. fastening tools, accessories, and parts. Please email any questions… All tools tested by our expert tool mechanics… Over 75 years experience in supplying high quality tools. The Tools the Pro’s use” We Ship Worldwide
$
30
Buy It Now
$0 Shipping
Condition: Used
Location: Saugerties,NY,USA
$
208.95
Buy It Now
$0 Shipping
Condition: New
Location: Huntington Beach,CA,USA
$
199.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
Zephyr Coin Dimple Punch and Dimple Die Assembly for Hot Dimpling For use with Chicago Pneumatic 450ea. Zephyr 450ea and US Industrial Tool 150 ea Hot ... moreRiveter Dimpling machines. Brand NEW- Includes Punch. Die, Ram and Retainer Clip ZT1855-3/32 Coin Dimple Punch for hot or cold coin dimpling. AN426 Rivet 100 Degree– Size 3/32” ZT1853-3/32 Coin Dimple Die Assembly for hot or cold coin dimpling spring loaded or air coin post anvil type. AN426 Rivet 100 Degree– Size 3/32” ZT185302-3/32 Ram and ZT185304 Retainer Clip These tools are turned from heat-treated. Shock resistant, finest tool steel, precision ground to extremely close tolerances. Includes Punch. Die, Ram and Retainer· Size 3/32” AN426 Rivet 100 degree· Punch Shank Size.374· For Pilot Drill and Dimple Type installation· Contact for individual parts We stock a large selection of tooling and replacement parts for Hot and Cold Dimpling and Riveting equipment. Please email us with questions… ProStarTools the tools the“Pro’s” use All Tools are inspected and operated before you receive them. Money Back*Guaranteed* We Ship Worldwide
$
980
5d 8h 20m 7s
0 bids
$1,300 Now
Free Shipping
Condition: New – Open box
Location: Wichita,KS,USA
$
100
Buy It Now
$0 Shipping
Condition: New
Location: Crestview,FL,USA
$
182.93
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
400
Buy It Now
$0 Shipping
Condition: Used
Location: Berthoud,CO,USA
$
55
Buy It Now
$8.5 Shipping
Condition: Used
Location: Lynnwood,WA,USA
$
1,464.75
Buy It Now
$0 Shipping
Condition: New
Location: Huntington Beach,CA,USA
$
70
Buy It Now
$15 Shipping
Condition: Used
Location: Port Orange,FL,USA
$
54.99
Buy It Now
$0 Shipping
Condition: New
Location: Redding,CA,USA
$
69
Buy It Now
Free Shipping
Condition: New
Location: Modesto,CA,USA
$
69
Buy It Now
Free Shipping
Condition: New
Location: Modesto,CA,USA
$
225
Buy It Now
$0 Shipping
Condition: Used
Location: Pennsburg,PA,USA
$
352.99
Buy It Now
$0 Shipping
Condition: Used
Location: Ventura,CA,USA
$
65.99
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Ventura,CA,USA
$
8.5
Buy It Now
$3.98 Shipping
Condition: New
Location: San Antonio,TX,USA
$
229.99
Buy It Now
$0 Shipping
Condition: Used
Location: Bogart,GA,USA
$
12
Buy It Now
$8.95 Shipping
Condition: New
Location: San Antonio,TX,USA
$
138
Buy It Now
Free Shipping
Condition: New
Location: Robesonia,PA,USA
$
139.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
Zephyr Coin Dimple Punch and Dimple Die Assembly for Hot Dimpling For use with Chicago Pneumatic 450ea. Zephyr 450ea and US Industrial Tool 150 ea Hot ... moreRiveter Dimpling machines. Brand NEW- Includes Punch. Die, Ram and Retainer Clip ZT1855-1/8 Coin Dimple Punch for hot or cold coin dimpling. AN426 Rivet 100 Degree– Size 1/8” ZT1853-1/8 Coin Dimple Die Assembly for hot or cold coin dimpling spring loaded or air coin post anvil type. AN426 Rivet 100 Degree– Size 1/8” ZT185302-1/8 Ram and ZT185304 Retainer Clip These tools are turned from heat-treated. Shock resistant, finest tool steel, precision ground to extremely close tolerances. Includes Punch. Die, Ram and Retainer· Size 1/8” AN426 Rivet 100 degree· Punch Shank Size.374· For Pilot Drill and Dimple Type installation· Contact for individual parts We stock a large selection of tooling and replacement parts for Hot and Cold Dimpling and Riveting equipment. Please email us with questions… ProStarTools the tools the“Pro’s” use All Tools are inspected and operated before you receive them. Money Back*Guaranteed* We Ship Worldwide
$
30
Buy It Now
Free Shipping
Condition: New
Location: Temple,PA,USA
$
244.99
Buy It Now
$0 Shipping
Condition: Used
Location: Yorktown,VA,USA
$
624.75
Buy It Now
$0 Shipping
Condition: New
Location: Huntington Beach,CA,USA
$
366.45
Buy It Now
$0 Shipping
Condition: New
Location: Huntington Beach,CA,USA
$
583.8
Buy It Now
$0 Shipping
Condition: New
Location: Olympia,WA,USA
$
800
Buy It Now
$0 Shipping
Condition: New – Open box
Location: East Kingston,NH,USA
This auction is for an Atlantic Air Tool model 60A"A" Squeeze. This item is used. But in excellent working condition. The total length is 14" ... morewith a 3" jaw depth. The jaw has an approximate 25 degree bend(so you don't have to get straight on) This tool is great for those tight spots. This item is offered with a money back guarantee. If within 5 days of receiving this item, you find that it is not in the condition described, return it for a full refund, less shipping.
$
19.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
$
515.21
Buy It Now
$0 Shipping
Condition: New
Location: Melville,NY,USA
$
499.99
Buy It Now
$17 Shipping
Condition: Used
Location: Mesa,AZ,USA
YOU ARE BIDDING ON A AVDEL 7273-0203 PNEUMATIC RIVETER/ SCREW GUN. THIS IS USED SURPLUS REMOVED FROM A SHUTDOWN FACILITY AND IS GUARANTEED WORKING. IF ... moreYOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156 OR HIT ASK THE SELLER A QUESTION. MWUPGS*2X4) CF) ESTIMATED RETAIL PRICE: $650.00 International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Check out my! Be sure to add me to your!
$
12.99
Buy It Now
$0 Shipping
Condition: New
Location: Nashville,TN,USA
$
76.95
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
1,359.75
Buy It Now
$0 Shipping
Condition: New
Location: Huntington Beach,CA,USA
$
50
Buy It Now
$0 Shipping
Condition: Used
Location: Lemoore,CA,USA
$
56.99
Buy It Now
$0 Shipping
Condition: Used
Location: Ventura,CA,USA
$
308.99
Buy It Now
$0 Shipping
Condition: Used
Location: Ventura,CA,USA
$
49.99
Buy It Now
Free Shipping
Condition: New
Location: Pekin,IL,USA
$
204.75
Buy It Now
$0 Shipping
Condition: New
Location: Huntington Beach,CA,USA
$
441.99
Buy It Now
$0 Shipping
Condition: Used
Location: Ventura,CA,USA
$
44.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
Riv Nut Rivet-Nut 10/32 wrench style Tool This simple and easy to use tool is excellent for pulling riv-nuts. Simply hold the body with a wrench and turn ... morethe pull-up stud with the supplied allen wrench. This wrench style will also let you apply more pulling force than is generally available from lever type riv-nut tools. Made of High Quailty Steel Size 10/32 Additional sizes available 440. 632, 832, 1032, 1024, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 1/2-13 and 1/2-20 sizes. Please email with questions. We offer expert advice on all Cherry. Huck, GBP, Hi-Lok, Hi-Shear, etc. fastening tools, accessories, and parts. Please email any questions… All tools tested by our expert tool mechanics… Over 75 years experience in supplying high quality tools. The Tools the Pro’s use” We Ship Worldwide
$
379.4
Buy It Now
$0 Shipping
Condition: New
Location: Carol Stream,IL,USA
| | | | Huck Manufacturing AK-175A Air Power Riveter. International Customers: All electronic products are packaged for sale in the US with US voltage. ... moreThis item is brand-new. Factory sealed. features and benefits: sets 1/8" through 1/4" steel rivets with up to 3500 lbs. Of pull capacity, tougher and more durable, includes blow molded carrying case, We only accept Paypal. Most orders placed prior to 11AM PST ship same business day. Some lightweight items ship Postal and can be shipped to a PO BOX. Most other orders will ship via UPS or FedEx. Please note we cannot ship UPS or FedEx to PO Box addresses. Expedited orders will ship 2nd Day Air. This item is eligible for return within 30 days of delivery. Returns of non-defective items will be charged a 15% restocking fee. Please visit our Returns Page for more information on Excluded Items. Damage Claims, and more details on requesting RA information. Founded in August 2002. Beach Audio´s mission is to provide the best experience on the Internet for buying Consumer Electronics. We focus on making purchasing online a pleasant experience. We offer flat rate Ground shipping on all items less than 75 pounds that can be shipped via common carrier. Our sales office is located in beautiful town of Redondo Beach, California, just a few miles South of Los Angeles International Airport. We do not stock any inventory at our sales office. Instead, we ship from several warehouses located throughout the country. Our sophisticated fulfillment system will automatically ship from the warehouse location that is closest to your shipping address! Why are our prices so low? It´s simple. We have modeled our business much like a wholesaler. We sell in huge volume and have streamlined our operations to provide you with the best combination of price and service available anywhere. Hours of Operation 8AM- 5PM PST MON- THU. 8AM- NOON PST FRIDAY. Copyright© Beach Audio Inc. 2010.
$
32.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
$
129
Buy It Now
Free Shipping
Condition: New
Location: Modesto,CA,USA
$
29.99
Buy It Now
Free Shipping
Condition: Used
Location: Greenville,PA,USA
$
249
Buy It Now
$14 Shipping
Condition: Used
Location: Canyon Lake,TX,USA
$
69
Buy It Now
Free Shipping
Condition: New
Location: Modesto,CA,USA
$
10
Buy It Now
$3 Shipping
Condition: New – Open box
Location: Apple Valley,CA,USA
$
1,727.25
Buy It Now
$0 Shipping
Condition: New
Location: Huntington Beach,CA,USA
$
14
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Spokane,WA,USA
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
 In 

Past Items  
 
Olympic style offset cherry lock pulled. Good condition. Teeth are good. Posted with
YOU ARE BIDDING ON A MARSON RIVET KIT NO.39001 IN GOOD CONDITION. BOXES OF RIVETS ARE HALF EMPTY. RIVET GUN IS VERY NICE AND CASE IS ALSO IN GREAT CONDITION. I TRY TO DESCRIBE MY ITEMS THE BEST I CAN. IF YOU HAVE ANY QUESTIONS PLEASE ASK. BE SURE TO CHECK OUT MY OTHER UNIQUE ITEMS IN MY STORE. THANKS
This is a very nice Cleco E-5 rivet gun. It has a great feather trigger and is nice and lite compared to other rivet guns. It uses standard.401 shank sets. It is surplus from Boeing. Best quality available.
aims DAYTON PNEUMATIC BLIND RIVETER- 4Z913 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Dayton. This is a used Pneumatic Blind Riveter in GREAT condition. Model# 4Z913 Specifications: Type: Medium Duty. Blind Rivet Diameter: 1/8" 5/32" and 3/16" Pulling Force: 2.000 lbs. CFM Per Stroke: 0.50. F)NPT Inlet: 1/4" Maximum Pressure: 90 psi. Overall Dimensions: 3" x 4" x 12" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. DAYTON PNEUMATIC BLIND RIVETER- 4Z913 DAYTON PNEUMATIC BLIND ... moreRIVETER- 4Z913 DAYTON PNEUMATIC BLIND RIVETER- 4Z913 Reliable Tool Inc. c 2011 | Powered by.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1415aff7d9c-0xfa-
CHERRY TOWNSEND AIRCRAFT LOCKBOLT RIVETER HEAVY DUTY POWER G85M WITH NOSE. THIS IS THE ONE OF THE BEST ONES YOU CAN BUY. FOR USE FOR VERY BIG AIRCRAFT REPAIRS AND IS VERY WELL MADE. I DO NOT HAVE A LOT OF INFORMATION- YOU SEE WHAT YOU GET FROM THE PICTURES.
4 Piece Rivet Shavers- All are 1/4-28 threaded- Sizes: 3/4. 5/8, 1/2, 7/16- Appear to be barely/ lightly used.
Purchased but never used. Not the tool we needed. Comes in the condition& with the parts we purchased.
CHERRY RIVET DIV. TOWNSEND. CO. G-28 HAND RIVETER IN PRETTY GOOD CONDITION COMES WITH ONE EXTRA TIP AS SHOWN THE LOWER HANDLE AND BODY ARE ALUMINUM AND TOP HANDLE IS STEEL.
USED. WORKS, HAS SOME OF THE SPARE PARTS AND WRENCHES NO INSTRUCTIONS
THIS AUCTION IS FOR ONE IN GREAT CONDITION AVRO-10025 WOOLF PACK PNEUMATIC RIVETER.PLEASE SUPER SIZE THE PICTURES FOR A CLOSER VIEW AND CHECK MY FEEDBACK.DUE TO THE SCAMMING BUYERS ALL MY ITEMS NEW OR USED SOLD THE SAME WAY.WE ARE LOOKING FOR GOOD BUYERS.AS SEEN IN THE PICTURES THE UNIT LOOKS GREAT.NO RETURNS.IT COMES WITH EVERYTHING YOU SEE IN THE PICTURES. jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-14184862771-0xf2-
HI YOU ARE BIDDING ON A CHICAGO PNEUMATIC ALLIGATOR RIVET SQUEEZE GUN CP-214. IT IS IN EXCELLENT WORKING CONDITION. I'M STARTING THE BID OUT@ ONLY $.01 W/ NO RESERVE! THANK YOU FOR LOOKING AND GOD BLESS! CHECK OUT MY OTHER AUCTIONS! I REQUIRE PAYMENT WITHIN 3 DAYS OF END OF AUCTION. BUYER IS RESPONSIBLE FOR ALL S&H CHARGES. SORRY I DO NOT SHIP TO P.O. BOXES OR INTERNATIONALLY. I HAVE LISTED THIS AUCTION TO THE BEST OF MY ABILITY. IF YOU HAVE ANY QUESTIONS FEEL FREE TO ASK AND I WILL ANSWER THEM THE BEST I CAN. THANKS KEYWORDS: SIOUX. SNAP-ON, SNAPON, STARRETT, ATLAS COPCO, CHCAGO, MILWAUKEE, MAKITA, AVIATION, AEROSPACE, AIRCRAFT, AUTO, VEHICLE, MECHANIC, DESOUTTER, RIVET, CLECO, CHERRYMAX, STRUCTURES, SHEETMETAL, COMPOSITE, ATS, DRILL, PNEUMATIC, AIR TOOL, DOTCO, HI-LOK, CRAFTSMAN, MACHINIST, MACHINING, METAL, TOOLING, TOOL, INSPECTION, ... moreMANUFACTURING, PRECISION, RATCHET, WRENCH,
Up for sale is a(31) piece rivet set lot. All are used but in good working condition. Sizes include. AN470(Boeing BB) 3/32" 40) 1/8" 30) 5/32" 20) 3/16" 10) and flush sets. Also included are hi lok collar cutters(1/8" 5/32" and 3/16" and two back shooter sets(one of these had some rust on it, when I removed it, it left all small amount of pitting) Lengths range from 5/16" to 3 3/4" shanks. I polished the working surface some on these. All are standard.401 I will combine shipping when possible. If purchasing more than one lot. Please do not pay until I try to combine) Thank you;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-141848627b3-0x109-
Up for auction is a pneumatic rivet gun. This includes thousands of steel rivets. Some look like aircraft rivets. The gun is like new and hardly used and works just fine.
401 Rivet"C" Set aircraft Automotive Air Tools Dotco Jiffy Souix Rockwell. 401 Rivet"C" Set For those hard to access areas
Vintage riveter tool. Good condition. sold as is.
10 PC ASSORTED RIVET SQUEEZER SETS-10 PIECE ASSORTED RIVET SQUEEZER SETS-SOME ARE NEW AND SOME ARE LIGHTLY USED-SETS COME EXACTLY AS PICTURED GREAT FIND!
This Riveter comes in a case with instructions. This is one of the tools my husband had. I imagine it works but tools are a foreign language to me so I am not able to try it out.
Used very little. In great shape. Just don't have a need for it. Works great. Includes the 3/32" tip and swivel for air connection.
THIS AUCTION IS FOR A LOT OF(47) PIECES OF AIRCRAFT TOOLS. THE LOT INCLUDES: STANDARD AIRCRAFT BOOK 1980 ROTORY FILES. HOLE FINDERS: 1/16-40, 1/8-30, 5/32-21, 3/16-10(2) CLECO PLIERS. AIR CONNECTORS, COUNTERSINKS, RIVET SQUEZZES, HOLE CHEC FLUSH GAGES, DE-BURRING TOOLS AND A FEW THREADED DRILLS. Check out my! PAYMENT MUST BE RECEIVED WITHIN 4 DAYS OR A NON PAYING BIDDER ALERT WILL BE FILED. PLEASE CONTACT ME IF THERE IS ANY PROBLEM PAYING. IF YOUR FEEDBACK SCORE IS LESS THAN 10. PAYMENT MUST BE PAID IMMEDIATELY(OR AUCTION WILL BE RELISTED OR OFFERED TO A SECOND CHANCE BUYER. WE DO OFFER COMBINED SHIPPING ON MULTIPLE AUCTION WINS WITHIN A 7 DAY TIME PERIOD. SHIPPING IS DONE WITHIN 24 HOURS OF RECEIPT OF PAYMENT. NO INTERNATIONAL BUYERS PLEASE.
10 piece set of hand or pneumatic rivet sets. All are used. Without flaws, ready to use.
9 piece set of.187 standard hand squeeze shank size sets. All items are not damaged. And in good performing condition.
Great condition huck nose assembly. For 3/16 lock bolts. Will fit 353. 745 sized pullers. Retaining tabs are sheared off on outer sleeve. Does not affect operation of puller assembly. Posted with
Huck Air Gun HSSFT-M16S Rivet Gun USED HUCK AIR GUN. WE HAVE NO WAY OF TESTING IT ALTHOUGH IT WAS REMOVED FROM A WORKING ENVIRONMENT. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# HSSFT-M16S APPROX. PRODUCT DIMENSIONS: WIDTH: 20" LENGTH: 30" HEIGHT: 10" SHIPPING WEIGHT: 35 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL ... moreUPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE
Preowned Cleveland Pneumatic Size E2 Offset Handle Rivet Air Gun in working condition. You will receive the item you see here. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-141851085a0-0x109-
V-3/79050 Rivet Tool HP 320 VALUE RIVIT No Returns! Item#3091
Jiffy model 100 riveter. Uses standard.401 shank sets. Great trigger. Good condition. Normal usage wear. No barrel slop. Posted with
THIS IS A USED CHERRYMAX PULLER. IT DOES NOT INCLUDE THE PULLING HEAD. I DO NOT KNOW MUCH ABOUT THIS TYPE OF TOOL. I APPLIED AIR AND PULLED TRIGGER AND THE THREADED SHAFT RETRACTED. I AM ALSO INCLUDING OVER 500 ASSORTED RIVETS THERE IS ONLY A COUPLE SPOTS WHERE THE PAINT IS CHIPPING. IT HAS BEEN TAKEN CARE OF. PLEASE ASK IF YOU HAVE ANY QUESTIONS THANK YOU
DESCRIPTION: BEST OFFER TAKES IT! USED. CHICAGO PNEUMATIC COMPRESSION RIVETER. I HOOKED IT UP TO AIR AND IT CYCLED. I DID NOT FIND ANY LEAKS. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT ... moreFOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMA
This auction is for the CherryMax G29 hand riveter. This item is used. But in excellent working condition. This is a Cherry® G-29 Hand Riveter, an efficient, compact, lightweight tool for installing Cherry® NUT-PLATE rivets. It comes equipped with a 3/32 nosepiece and a 1/8 nosepiece stored in the handle for installing the rivets. The G-29 Riveter is 9-1/4" long, weighs just 13 ounces and is intended for use when access or power limitations prevent the use of power tools. This item is offered with a money back guarantee. If within 5 days of receiving this item, you find that it is not in the condition described, return it for a full refund, less shipping.
FRESH FROM ESTATE AUCTION LOT OF 18 ROTARY GRINDING BITS.TAPS,EASYOUTS,DRILL STOPS. AIRCRAFT TOOLS I DONT KNOW WHAT EVERYTHING IS CALLED. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-14186010a22-0xf5-
FRESH FROM ESTATE AUCTION LOT OF 20 ROTARY GRINDING BITS AIRCRAFT TOOLS I DONT KNOW WHAT EVERYTHING IS CALLED.
For your consideration: Pop Rivet Gun* Marson* Heavy Duty* Klik Fast* HP-2 Different size heads(2) are missing! It only has one. Thanks for viewing and have a fantastic day!
Cleveland pneumatic a-squeeze. Yolk is 1.5" deep and 1.5" wide. Works very well. Uses 3/16 shank sets. Normal usage wear. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-14186010a42-0x102-
Ebay Base This auction is for 5 small T-handle tap wrenches for mini and micro hand taps. These are used and in fully functional condition. One is marked Craftsman. Made in USA is our primary focus. Only the best of the best tools. That a Machinist can Brag about, are at auction. We never auction any Chinese or Indian. Harbor Freight Garbage! Please look at the pictures carefully before you bid. Each photo shows a different view of the SAME items! SHIPPING Items are shipped using U.S. MAIL. We expertly combine multiple orders into the most cost effective package. Using Priority Mail flat rate boxes. Win more than one auction and save huge on shipping.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-14186f1edfc-0x106-
FRESH FROM ESTATE AUCTION LOT OF COUNTERSINK REAMERS BITS AIRCRAFT TOOLS I DONT KNOW WHAT EVERYTHING IS CALLED THEY ARE ALL THREADED AND SCREW INTO A HOMEMADE METAL PLATE.72 ITEMS
FRESH FROM ESTATE AUCTION LOT OF REVIT TOOLS I WILL BE LISTING MORE AIRCRAFT TOOLS LATER THIS WEEK.THERE ARE 53 AIR TOOL TIPS SOME BIG SOME SMALL.
MATCO SILVER EAGLE SE214 ¼” AIR HYDRUALIC RIVET GUN RIVET GUN SHOWS SIGNS OF USE LIKE SCRATCHES AND SCUFFS AROUND EXTERIOR PLEASE REVIEW PICTURES Rivet gun information: Matco Silver Eagle Rivet Gun 1/4” Air hydraulic Part# SE214 Capacity: ¼” Avg. Air Cons.4.5 CFM Strokes Per Minute: 551 Nose Pieces: 6 Sound Level(dBA) 78.0 Air Inlet Size: 1/4" Min. Hose Size: 3/8” Performance Rating: Heavy Duty Traction(Pulling Force) 3.055lbs Stroke Arc: 551” I do not ship out of the USA. FedEx does pick ups on Mon. Wed. and Fri. I am out of the office on weekends. All questions about this item asked on the weekend will be answered promptly on Tuesday morning when I am back in the office. NM residents add 7.65% tax. Returns accepted within 14 days. Feel free to contact me with any questions and I will do my best to get them answered for you. ... moreI do allow combined shipping. Be sure to check out my other listings and save me to your favorites for future listings. Thank you and good luck! Adam Alberson MMJ’S Pawn Llc(575)526-9053
FRESH FROM ESTATE AUCTION LOT OF BUCKING BARS 33 OF THEM.53 POUNDS ALTHOUGH THESE WILL FIT IN ONE MEDIUM PRIORTY BOX I THINK ITS TO MUCH WEIGHT AND MIGHT BUST OPEN SO I AM GOING TO RECOMEND 2 PRIORTY BOXES.SOME ARE MARKED USAF SO THESE ARE QUALITY TOOLS I WILL BE LISTING MORE AIRCRAFT TOOLS LATER THIS WEEK.
Emhart PRG540 Industrial POP Rivet Gun Riveter- Untested/ Cannot Test- Used Up for sale is an Emhart PRG540 Industrial POP Rivet Gun Riveter- Untested/ Cannot Test in used condition. This item has been used therefore there is some normal wear such as scratches. Scuffs, dings, dirt, dust, rust, etc. There is lots of wear on this item(as seen in photos) large amounts of scratches and scuffs also. As stated in the title. I cannot test this item therefore is the reason to being listed FOR PARTS OR NOT WORKING and will be sold AS-IS! If you have any questions feel free to ask. Thank You and Happy Bidding! PLEASE READ BEFORE BIDDING: We are committed to the satisfaction of your purchase. If you are not satisfied in any way please give us an opportunity to make it right before leaving feedback. We want positive feedback and five stars. And we always ... moreleave positive feedback for our customers! BIDDING POLICY: We reserve the right to remove bids placed by those with low feedback. Negative feedback, or unfavorable bidding practices. PAYMENT POLICY: If we do not receive payment within 4 days of your winning the auction. A case will be opened. If we do not receive a payment after 4 more days, the case will be closed and the item will be relisted. We prefer Paypal, but we also accept local pickup. SHIPPING POLICY: WE ONLY SHIP TO PAYPAL CONFIRMED ADDRESSES. IF YOUR TOTAL PAYMENT OF ALL ITEM(S) IS OVER $200. WE SHIP ONLY VIA DELIVERY SERVICES THAT GENERATE A TRACKING NUMBER AND REQUIRE A SIGNATURE CONFIRMATION UPON DELIVERY. IF THE ITEM IS LESS THAN $200, WE WILL SHIP WITH A TRACKING NUMBER. SHIPPING INFORMATION: We do combine shipping. Please notify us you are bidding on another item before paying and we will send you an invoice after all auctions are done. We only ship to the CONTINENTAL USA. NO EXCEPTIONS! EMAIL COMMUNICATION: Please use EBAY's mail message system to notify us. We DO NOT check or answer messages from our email address due to scammers trying to hack our account. LOCAL PICKUP: We do not prefer local
FOR SALE IS ONE USED HUCK 99-2516-A 353 TYPE 1/4" NOSE ASSEMBLY. FOR: LGP LOCKBOLT PER DATA SHEET TOOL:353/225BE/226/245/246/247/2502/2503/4801 1 EXTRA SET OF GOOD USED UNITIZED JAWS(DJ) GOES WITH EACH NOSE ASSEMBLY THE HUCK 99-2516 NOSE CAN INSTALL HUCK 1/4" C6 FASTENERS USING 2C COLLARS AS USED IN CURRENT TRUCK TRAILERS AND OLDER TRUCK CABS FOR MOUNTING BODY PANELS. THIS CAN BE USED WITH THE HUCK 353.225,246,256 GUN/RIVETER OR OTHERS. WILL NOT INSTALL MAGNAGRIP TYPE FASTENERS TOOLS PICTURED ARE THE TOOLS FOR SALE. 100% REFUND IF YOU ARE NOT HAPPY WITH PURCHASE RETURNS: PURCHASE PRICE WILL BE RETURNED OR TOOL EXCHANGED IF CUSTOMER WISHES AS LONG AS THE TOOL IS RETURNED WITHIN 30 DAYS OF RECORDED DELIVERY DATE. SELLER CHARGES SALES TAX FOR ITEMS SHIPPED TO WASHINGTON STATE(0.090% FREE SHIPPING FOR ALL UNITED STATES BUYERS IN THE ... moreLOWER 48. THIS INCLUDES DELIVERY CONFIRMATION. WILL SEND BY USPS FIRST CLASS(2 TO 5 DAYS DELIVERY TIME) WILL SEND TOOLS WITHIN 1 DAY OF CONFIRMED PAYPAL PAYMENT AND EMAIL YOU ON THE DATE TOOLS ARE SENT. WORLDWIDE SHIPPING AVAILABLE AT ADDITIONAL SHIPPING COSTS. LIABILITY: BUYER IS RESPONSIBLE FOR THE SAFE AND PROPER USE OF ITEM(S) PURCHASED FROM ME AND THE BUYER AGREES TO HOLD THE SELLER FREE OF ANY LIABILITY FOR ANY INJURY. LOSS OR DEATH RESULTING FROM THE USE OR MISUSE OF ANY ITEM(S) PURCHASED FROM ME. WILL NOT INSTALL MAGNAGRIP TYPE FASTENERS.
Jiffy Corner Rivet Gun with(9) Sets: 1) Flat. 4) Offset and(4) Straight(3/32, 1/8, 5/32, 3/16) Refurbished by Aviation Tool company prior to my purchase, hardly used. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-1419247f491-0xe4-
Up for sale is a twenty one piece rivet set lot. All are used but in good working condition. Sizes include. AN470(Boeing BB) 3/32" 40) 1/8" 30) 5/32" 20) 3/16" 10) and flush sets. Most are#30 and#20. A few of these had some light surface rust that I removed, and may have a small amount of pitting. Overall they are in real good condition(see pics) Lengths range from 3/4" to 4" shanks. I polished the working surface some on these. All are standard.401 I will combine shipping when possible. If purchasing more than one lot. Please do not pay until I try to combine) Thank you
This is a very nice set of Cleco rivet guns. You get E-5. E-4 and E-3 rivet guns. It have great feather triggers and are nice and lite compared to other rivet guns. They use standard.401 shank sets. They are surplus from Boeing. Best quality available.
avdel rivet gun 0764 Unit is in good cosmetic condition. Comes as pictured. Link to PDF Manual ATTENTION INTERNATIONAL BUYERS! Customs and VAT fees are NOT included in item cost. It is a Buyer responsibility to pay Customs and Vat fees in your country. Terms and Conditions All sales are final. The Buyer assumes all risk of liability with respect to the purchase and determination of suitability of use of product. The buyer is solely responsible for the shipping charges. Payment is expected in 4 days after item is sold. Products Unless otherwise stated you are purchasing a used item. These items may or may not have scratches. Nicks and dings. None of this will affect the fit or functionality of an item. Once again it is up to you to ask questions up front to determine the suitability of an item for your particular application. Operating Systems ... moreare Not installed Software suitability is the buyers responsibility we will not be held liable for in-comparability issues. Batteries: Also we will not warranty and batteries unless specifically stated Warranties: First is as-is; this will mean that the unit has not been fully tested. Or has not been tested at all and is being sold without warranty expressed or implied. We will not accept any returns on these items. So please make sure you bid accordingly. Second is guaranteed against Dead on Arrival what this means is that we have tested the unit and it has passed our inspection criteria and is a working unit. DOA will mean that the unit will show symptoms of a hardware failure which will prevent you from using this unit as it was intended to be. If you have a problem please contact ASAP prior to trying anything else. This warranty will be void and null if the product is modified. Opened, repaired or tampered with in anyway. All DOA notification must be filed with Advanced Electronics Recycling within 4 days of receiving your order. Failure to notify us or return a product within the warranty period will be deemed to be an acceptance of the unit. Servers. Laptops, and
Cherry Aerospace LLC. Model- G7048-40SH Max rivet- S2456-5-2(400) total
VINTAGE RIVET TOOL. RIVETS& WASHERS IN PACKAGE Powered by The free listing tool. List your items fast and easy and manage your active items.
ECLIPSE AIR SANDER/ GRINDER WITH CONTROLLER. ITEM BEEN TESTED AND IN VERY GOOD WORKING CONDITION. 6" LONG BUT VERY POWERFULL. NO INTERNATIONAL SHIPPING. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1419af35201-0x107-
aims NICE! ASTRO PNEUMATIC AIRCRAFT RIVETER- PR14 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a Pneumatic Aircraft Riveter in Good condition. Specification: Working Air Pressure: 5.8bar or kgf/cm2(85psi) Air Consumption: 4.5 cfm. Open-End Rivets 1/4" 1/4" Air Inlet. Overall dimensions: 7 1/4" x 4" x 11 1/2" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! ASTRO PNEUMATIC AIRCRAFT RIVETER- PR14 Reliable Tool Inc. c 2011 | Powered by
TOWNSEND CHERRY HUCK RIVETER. MODEL G40C
CHERRY HUCK MODEL 353. SERIAL NO.R6641H, AIRCRAFT HEAD
AIR OVER OIL POP RIVET GUN You are buying a used but nice riveter. This rivet gun has been disassembled. Cleaned, and repainted. It has been refurbished and tested in good working order. Bid with confidence knowing that Taps and More inspects. Cleans and tests(when possible) most tools prior to each auction. POLICIES• All statements regarding products and their configurations are to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. It is the bidder's responsibility to understand the terms of the auction. The nature of equipment offered and bid accordingly. The buyer must notify us of a problem within 3 days of receiving item(s) If you are not happy with your purchase. We will gladly refund your money, minus shipping costs. If the item is not as described. ... moreYou will receive a full refund. SHIPPING Shipping will be via UPS unless otherwise specified. UPS will send an email containing a tracking number once we ship your item. P.O. BOXES are never accepted. We ship items to physical addresses only. We ship to the address registered with PayPal. If that address is incorrect. It is the buyer’s responsibility to supply us with the correct address prior to paying for the item. Pick ups are permitted with prior approval. Please do not request a tracking number from us until at least 7 days have past. We ship 5 days a weeks. However, items purchased on Fridays may not be shipped until the following Monday. International items may take longer. CONTACT US TAPS AND MORE JOSEPH D'AMICO 440-773-9477 CLEVELAND. OHIO Powered by The free listing tool. List your items fast and easy and manage your active items.
3.500-lbs. of power. Sets aluminum, steel, and stainless rivets through 1/4" Includes rivet gun 1/4" Auto-Split"T" rivet nose piece, 1/8" nose piece, 2 misc nose pieces and plastic case. SELLER’S TERMS AND CONDITIONS– PLEASE READ CAREFULLY! By placing a bid on or purchasing my item(s) You are agreeing to the following terms and conditions. GENERAL: Photo(s) shows the actual product I am selling. What you see in the photo(s) is what you get. I do my best to accurately describe the actual condition of the item. Feel free to email me with any questions. I recommend that you ask questions BEFORE you place a bid. This item is sold strictly as-is. And no warranty or guarantee is expressed or implied. In general, all of my sales are final and there are no returns. Please see my Feedback Policy below. Check out my 100% positive ... morefeedback and bid with confidence! PAYMENT: Payment MUST becompleted within 3 days of end-of-auction. I ACCEPT PAYPAL ONLY. NO PERSONALCHECKS! NO eCHECKS! SHIPPING: Buyer pays the shipping and handling fee as indicated. If you purchase multiple items from me. I will combine the shipping to save you money. I usually ship USPS and I will generally ship to locations in the US only. I will usually ship within 72 hours of receiving payment. I carefully pack all items for shipment and do my best to insure that the package will arrive safely and undamaged. You won’t be disappointed with my packaging. NO ITEM PICK-UPS ARE AVAILABLE FOR LOCAL BUYERS. SO PLEASE DON’T ASK! I currently do not ship outside of the USA. MY MERCHANDISE: I am a private seller.Not a retailer. Most of the items I offer for sale are generally part of my personal collection, and I take very good care of all my stuff. My home is a low humidity and smoke free environment. I occasionally will sell items I have acquired as part of an auction lot or by other means. I am not interested in selling junk and I will only of
Chicago Pneumatic CP-4444 RUTAB riveter. Uses.401 shank rivet sets. Great operational condition. Normal usage wear. Shipping will be calculated unless flat rate is cheaper Posted with eBay Mobile
Ingersoll Rand AVC 12(3x) riveter. Uses.401 shank rivet sets. Great operational condition. Normal usage wear. Shipping will be calculated unless flat rate is cheaper Posted with eBay Mobile
Ingersoll Rand AVC 13(4x) riveter. Uses.401 shank rivet sets. Great operational condition. Normal usage wear. Shipping will be calculated unless flat rate is cheaper Posted with
This is a Olympic RV51GA riveter. It pulls MS style Cherry rivets. It works great with no leaks.
This rivet gun works like new. It is made by Chicago Pneumatic. The model number is CP4444RUTAB. It has the best feathering trigger you can get on a rivet gun. It uses regular.401 shank sets. This tool is made in the USA. Built to last for years unlike the import junk being sold. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1419db2160b-0xff-
Up for sale is a used air rivet gun. Model prg510. Item is used but in very good condition. Local pick up is welcomed at no shipping charge with cash payment only.
This is a very nice working Atlas Copco RBB-09P recoil-less bucking bar. It reduces the vibration of bucking a rivet by 75% This is a very unique tool.
This is a Chicago Pneumatic CP0214 ENFEL tandem cylinder rivet squeezer. It works like new. No grinding or sanding on the tool. It is surplus from Boeing. It has 2-1/4" jaws and uses standard 3/16" sets. This is the best quality rivet squeezer made bar none and the one all others copied. Sells new for over $2500.
Used. It has been sitting for a while. Has 9 heads. And air bleeding kit. Posted with
US Tool 3X Rivet Gun Model TP83 Air regulator included I bought this from a guy that bought it new to build his RV plane. It has had little usage on it. Good Working Condition Uses Standard.401" Rivet Sets Tested and Lubricated Actual picture See my Ebay Store
Chicago Pneumatic 3X Rivet Gun Model CP4444 RUSAB Aviation Surplus From a working environment Good Working Condition Uses Standard.401" Rivet Sets Tested and Lubricated Actual picture See my Ebay Store
This drill works perfectly and was used as recently as 10/10/13. It comes with the case and operating manual.
Emhart Teknologies Pop Proset 2500MCS Air Rivet Gun-Air Riveter- Aircraft Tools This blind rivet gun is in great working condition. Shows scuffs and scratches. This riveter will install blind rivets up to 3/16" including high strenght steel and stainless steel monobolts. Very small and lightweight yet very powerfull. Shipping to the USA only. Thank you for looking at this auction. Posted with
Cleco E5 Air Rivet Gun-Air Riveter- Aircraft Tools. This rivet gun is in nice condition. Some light scuffs. Made in Dresser Ind. USA Shipping to the USA only. Thank you for looking at this auction. Posted with
18090 Wolf Road Orland Park. IL 60467 MARSON KLIK RIVETER MODEL PHT-4#39017 85 PSI HEAVY DUTY, Powered by Title: MARSON KLIK RIVETER MODEL PHT-4#39017 85 PSI HEAVY DUTY Condition: PRE-OWNED; UNIT SHOWS SCRATCHES; AIR HOSE/ ATTACHMENTS NOT INCLUDED. Tested: IN WORKING CONDITION Description: Brand: MARSON Model: PHT-4 Stock# 39017 Color: SILVER PSI: 85 psi MAXIMUM PRESSURE Dimensions: 7.25" x12.5" Location: This item is located at our Orland Park store unless otherwise specified. If you are picking this item up locally instead of having it shipped. We still ask that you please call or message for the location of this item. Certain large items may not be located in our store. Thank you. Disclaimer* Please note that we do our best to describe all damage and details- dimensions are approximate by hand. If you the buyer are not happy ... morewith an item. Please see our return policy under the Returns tab below. We do NOT do partial refunds but we want every buyer to be happy with their purchase. Please read below for further description on the item. Thank you! It is our highest goal and best intention to provide exemplary customer service. Open and honest two-way communication is the key. If you feel that you cannot leave 5 star feedback for any reason. Please contact us so we may resolve the situation prior to feedback being left. Please View PHOTOS for further details LB/WIRE#1-3/5 76072. We accept payments via Paypal. Mastercard and Visa as well as debit cards with the Mastercard or Visa logo. We do not accept any type of International Payment at this time. Please allow PayPal ePayments at least five(5) business days to clear. Sales Tax: All State of Illinois residents will be charged state and local sales tax during the payment process. In addition. As required by Illinois state law, sales tax is required on shipping and handling charges for all shipments terminating within the State of Illinois. Please note that if you reside outside the State of Illinois and you pick your item up locally in Illinois, ownershi
Up for sale is a seventeen piece rivet set lot. All are used but in good working condition. Sizes include. AN470(Boeing BB) 3/32" 40) 1/8" 30) 5/32" 20) 3/16" 10) butt shooter and flush sets. Most are#30 and#20. A few of these had some light surface rust that I removed, and may have a small amount of pitting. Overall they are in real good condition(see pics) Lengths range from 3/4" to 3 3/4" shanks. I polished the working surface some on these. All are standard.401 I will combine shipping when possible. If purchasing more than one lot. Please do not pay until I try to combine) Thank you
This US Air Tools 3X Rivet Gun is used but in excellent. It has a few scratches on it but otherwise looks great and works. It comes with 3 retainers and 2 rivet sets.
All steel construction. Comfortable vinyl grip. Spring-loaded handle for easy rivet loading and ejecting. Extended nose for hard-to-get-at places. Locks when not in use. Used on aluminum, canvas, metal; also for installing, repairing and 1,001 uses. Includes 4 nose pieces with wrench. Use 4 rivet sizes: 3/32" 2.5mm) 3/16" 5mm) good luck bidding!
Rivet Grip& Diameter Gauge. gage for cherry knob stem MS RIVETS 100 THRU 500 SERIES MADE IN USA CHERRY FASTENERS SANTA ANA. CALIFORNIA
FRESH FROM ESTATE AUCTION.I DONT KNOW ABOUT THIS STUFF BUT LOOKS GOOD SET OF 5 HOLE FINDERS. I WILL BE LISTING MORE AIRCRAFT TOOLS LATER THIS WEEK.
FRESH FROM ESTATE AUCTION LOT OF 45 COUNTERSINK REAMERS BITS AIRCRAFT TOOLS I DONT KNOW WHAT EVERYTHING IS CALLED.
Large Lot Of AIR Tools Kobalt etc and various other air tool parts HUGE LOT see pics for whats included
This auction is for a CherryMax model G83 pneumatic riveter with CherryMax 5/32" Blind Rivet Pulling Head(p/n H83B-5MB) This item is used. But in excellent working condition. Manufacturer's description: The Cherry G83 pneumatic-hydraulic lockbolt installation tool is a heavy duty production tool designed for high speed. Reliable installation of the most popular sizes of aircraft lockbolts, blind bolts and blind rivets. This extremely powerful tool has been designed with many ergonomic features: light weight, less recoil, low noise, and a comfortable fit in the operator’s hand. It can be operated in any position with one hand. Specifications: 90 to 110 PSI(6.2 to 7.6 bar) operating pressure; 3750 lbs(16.7 kN) pulling force at 90 psi(6.2 bar) 800 lbs(3.56 kN) on return stroke; 438” 11.1mm) stroke length; 4.95 lbs(2.25 kg) weight. NSN: ... more5130-01-435-3507 Recommended Nosepieces: H701B-456 for CherryMAX®; H83A-5MB. And H83A-6MB for MaxiBOLT. What is pictured is what is included. This item is offered with a money back guarantee. If within 5 days of receiving this item. You find that it is not in the condition described, return it for a full refund, less shipping.
This is a very nice Cleco E-3 rivet gun. It has a great feather trigger and is nice and lite compared to other rivet guns. It uses standard.401 shank sets. It is surplus from Boeing. Best quality available.
This is a very nice Cleco E-4 rivet gun. It has a great feather trigger and is nice and lite compared to other rivet guns. It uses standard.401 shank sets. It is surplus from Boeing. Best quality available.
Just in from a local aerospace company sale comes this surplus Huck 244 and Chicago Pneumatic CP-0351 Parts. as shown. May be other names too All items with power cords are tested for simple power on only. It is presumed good( unless otherwise noted) but sold as shown and as-is. Local Pick-up available 8am-12noon weekdays from 91355/ 9% Calif. sales tax required WE SHIP FAST! Location/ under workbench
Made in England Gripsert Master Assortment no. 7083 Rivnut Kit. Includes everything in photo: Hand Tool 8 different mandrels: 10:24. 6:32, 8:32, 10:32, 1/4:28, 1/4:20, 5/16:20, 5/16:24 Large assortment of Rivnuts Original metal case You're purchase will be well packaged and insured with tracking number. Guaranteed to arrive in one piece and as described or your money back. Don't forget to check out my other listings and save on shipping! You may be interested in. Questions: 1-817-4557062 Hours of operation: Mon-Fri = 10:00 AM- 6:00 PM CST 139 Lakeview Rd. Rhome. TX. 76078 Powered by
Cherry max installation tool g784 rivet gun huck/ puller aircraft riveter it comes with H681 SERIES PULLING HEAD as shown in pictures. This sale also includes the owners manual. The tool came from military surplus and it was dimissed because of the small rust shown in pictures. Besides that, the tool is in excellent working and cosmetic condition very well oiled and with no mayor scratches or owners marks. Please also note that no other aditional parts or nose pieces are comming with in this sale. Powerful Cherrylock pneumatic-hydraulic riveter• Used to install most all Cherrylock rivets up to 1/2"grip• H681 series pulling heads fit directly on this tool•Not other pulling heads included in this sale For more information about the pullin heads neededed for your aplication you can go over"COMBINE SHIPPING. If you want to buy more ... moreof our store items please do so and request an invoice before paying as we combine shipping. QUALITY GUARANTEE: We inspect and test all items that come into our shop. However. We deal with a large variety of items and our knowledge of some items is quite limited. Because of this we offer a 48 hour inspection period on all items that we sell. If you happen to find a problem with your item that we missed, please let us know within 48 hours of delivery. We will repair the item or refund your money if there is a problem that we cannot fix. Good customer service is our only goal. Please let us know immediately if there is a problem with your item. International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Please note that we are not related with any of the companies that manufacture the products that we sale therefore if you have any questions regarding our products you can contact us directly. Mycyberoffice.com eBay Store Visit My eBay Store: MyCy
aims SWEET! CHICAGO PNEUMATIC 5" ALLIGATOR" YOKE COMPRESSION RIVETER- CP-0351 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Chicago Pneumatic Tool Co. This is a Pneumatic"Alligator" Yoke Compression Riveter in GREAT condition. Model# CP-0351 Serial# 0343C002 Retails for Over $3.950.00! Specifications: Throat: 5" Yoke Gap 2" Aluminum Rivet Capacity: 1/8" Steel Rivet Capacity: 3/32" Shank Diameter: 0.187" Maximum Force: 3.400 lbs. believed to be) Overall Length: 26" Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this ... morecategory by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SWEET! CHICAGO PNEUMATIC 5" ALLIGATOR" YOKE COMPRESSION RIVETER- CP-0351 SWEET! CHICAGO PNEUMATIC 5" ALLIGATOR" YOKE COMPRESSION RIVETER- CP-0351 SWEET! CHICAGO PNEUMATIC 5" ALLIGATOR" YOKE COMPRESSION RIVETER- CP-0351 SWEET! CHICAGO PNEUMATIC 5" ALLIGATOR" YOKE COMPRESSION RIVETER- CP-0351 Reliable Tool Inc. c 2011 | Powered by
5 PC STRAIGHT. OFFSET& FLUSH 0.401 RIVET SETS FOR RIVET GUNS-ALL ARE 0.401 SHANK-SETS INCLUDED ARE MARKED AS FOLLOWS: FLUSH SET USED GOOD CONDITION-STRAIGHT SET: 1/8& 1/4" NEW-STRAIGHT SET: 3/16" USED GOOD CONDITION-OFFSET SET: 1/8" USED GOOD CONDITION-USED SETS HAVE SANDED MARKS(cosmetic) A MILITARY ETCHED NUMBER WAS REMOVED-5 PC SET COMES EXACTLY AS PICTURED! GREAT FIND! lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-141bc20b9a8-0xfe-
Snap-On T8 Through T50 Tork bits Like brand new 1/4& 3/8 Drive
Cherry Textron Installation Nut-Plate Air Operated Power Rivet Tool G702 Cherry Textron Installation Nut-Plate Air Operated Power Rivet Tool G702 Details: 1) Cherry Textron Installation Nut-Plate Air Power Rivet Tool G702 Click for more information. Condition: Good cosmetic condition with some minor signs of previous use. The hose is showing signs of age as shown. Please refer to the photos for more details. Tested: Was removed from a working environment. I hooked it to an air compressor and it seems to function as intended. I do not have the rivits needed to fully test this unit. Only the items in the photos will be included. Warranty: 14-Day Right-of-Return SKU: 393309-A Please review our Help page for all of our Terms and Conditions before bidding or purchasing. By bidding or purchasing our merchandise. You are agreeing to these terms ... moreand conditions. Questions? Send us a message SALE TERMS AND CONDITIONS: Only the pictured items are included in the listing. If it is not pictured or mentioned in the description it is not included. Place a bid only if you intend to purchase the item. If payment is not received within 3 days. The item(s) will be relisted at our discretion. PAYMENT INFORMATION: Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within three days. Payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) A 8.75% Sales tax applies to CALIFORNIA residents unless a resale tax ID is provided for our records. We cannot process the order until we receive sales tax or a copy of your tax ID. If you would like to pay using a credit card. Please call us at(408) 743-5609. Resellers Click Here* WARRANTY: Please see listing above for the warranty that applies to this item. AS-IS. No Warranty: When an item is stated as being AS-IS. The condition of the item is either unknown or has known issues(as stated in the description) and does NOT carry any warranty and NO re
Click to Enlarge Click to Enlarge Click to Enlarge U.S. AIR TOOL Rivet Squeezer Brand, US Airtool, Type, C Yoke Rivet Squeezer, Steel Rivet Capacity(Inch) 5/32, Aluminum Rivet Capacity(Inch) 3/16, Reach(Decimal Inch) 1.50, Gap(Decimal Inch) 0.6875, Style, Tandem Cylinder, Pressure(PSI) 90, Overall Length(Inch) 14, Model# 34-720C MSRP: $1300 Item appears to be in used condition. But still looks and works great! Comes as shown. Shipping Weight: 5 Lbs. Shipping Dimensions: 16" x 6" x 4" Tommy R/ 10.11.13/ Rack 1 Shelf 2 Rear Bin 13/ 21522 inkfrog terapeak. Analyzing"Smart Counters" only at inkFrog inkFrog Analytics.
This rivet gun is in great working condition. Showing very minor wear on the housing. At some point. The base gasket will need to be changed. But worked perfectly when tested and oiled prior to listing. That being said, this rivet gun is sold as is. Comes with a 99-3301 nose assembly, which will pull 1/4" Magna-locks and Magna-bulbs. Purchased separately, the rivet gun and nose assembly will cost $1500 or more. Save some scratch and buy this one! Any questions feel free No international shipping Free shipping with Buy It Now PayPal only for payment Posted with
For sale in this listing is a Sioux Tools Pneumatic Air Screwdriver. 650 RPM C2105Q C2705Q. Made in the USA. Tested and fully functional. No personal engravings. Shows signs of use that can be seen in pictures. The label on both sides of the handle which shows the model# is gone. There is a model# etched on the top of the gun but it is hard to discern. Appears to be either'C2105Q or C2705Q" Does not include retail packaging or owners manual. Items pictured are exact items winning bidder will receive. We usually ship items within 1 business days after auction has been paid for. This Auction ships to lower 48 U.S. residents only. We will pay return shipping if the reason for the return was from an error in the listing that was the seller's mistake or if we ship the wrong item. If the return is for a reason other than a mistake ... moreby the seller. Then the buyer will be refunded the price of the item but not the original shipping charges and not the return shipping costs. If an item has free shipping either as a'Buy it Now' or'Auction' listing and it is returned buyer will be refunded original amount less our original shipping costs. If the error is our fault we will gladly cover all costs. Original and return. We over pack all items with packing material to ensure safe shipping. We sell hundreds of items and do our very best to describe items as accurately as possible. Please feel free to contact us with any questions. 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-141bc20ba1e-0x100-
For sale in this listing is a Chicago Pneumatic CP-4444 RUSAB Pneumatic Aircraft Rivet Gun Air Hammer Tool. Made in the USA. Tested and fully functional. No personal engravings. Shows signs of use that can be seen in pictures. Does not include retail packaging or owners manual. Items pictured are exact items winning bidder will receive. We usually ship items within 1 business days after auction has been paid for. This Auction ships to lower 48 U.S. residents only. We will pay return shipping if the reason for the return was from an error in the listing that was the seller's mistake or if we ship the wrong item. If the return is for a reason other than a mistake by the seller. Then the buyer will be refunded the price of the item but not the original shipping charges and not the return shipping costs. If an item has free shipping either ... moreas a'Buy it Now' or'Auction' listing and it is returned buyer will be refunded original amount less our original shipping costs. If the error is our fault we will gladly cover all costs. Original and return. We over pack all items with packing material to ensure safe shipping. We sell hundreds of items and do our very best to describe items as accurately as possible. Please feel free to contact us with any questions.
For sale in this listing is a U.S. Aerospace Tools 3X Pneumatic Aircraft Rivet Gun Air Riveter Tool. Made in the USA. Tested and fully functional. No personal engravings. Shows normal wear from use not abuse. Does not include retail packaging or owners manual. Items pictured are exact items winning bidder will receive. We usually ship items within 1 business days after auction has been paid for. This Auction ships to lower 48 U.S. residents only. We will pay return shipping if the reason for the return was from an error in the listing that was the seller's mistake or if we ship the wrong item. If the return is for a reason other than a mistake by the seller. Then the buyer will be refunded the price of the item but not the original shipping charges and not the return shipping costs. If an item has free shipping either as a'Buy it ... moreNow' or'Auction' listing and it is returned buyer will be refunded original amount less our original shipping costs. If the error is our fault we will gladly cover all costs. Original and return. We over pack all items with packing material to ensure safe shipping. We sell hundreds of items and do our very best to describe items as accurately as possible. Please feel free to contact us with any questions.
DAYTON PNEUMATIC RIVETER 4CA32 Description* Air Riveter. General Duty, Pulling Force 4872 lb. Blind Rivet Dia. 5/32 In. 9/32 In. 3/16 In. and 1/4 In. Air Inlet 1/4 In. NPT, Min. Hose Size 3/8 In. Max. Pressure 90 psi, Length 12-1/2 In. Condition: Good USED condition- see pictures for all wear Includes* Actual item(s) shown in pictures ONLY*When describing items I do my best with the information I have. I am NOT an expert. If accessories/items are not shown in pictures then it is NOT included. Some items are used(if specified) and don't always come with every attachment. Terms and Conditions Once a bid has been placed. It is a legally binding contract of purchase SERIOUS BIDDERS ONLY Please ask ALL questions before bidding Please note that if there are any problems. Contact us first via e-mail, through eBay, giving full details of any ... moreproblem Payment must be received within 4 working days of purchase PayPal only NO EXCEPTIONS If payment is not received within 4 days of purchase then an Unpaid Item Case will be filed Returns accepted within 14 days. BUYERS pay return shipping Standard shipping in the Continental U.S. only We DO NOT ship out of the United States We ship out within 1-3 BUSINESS day(s) AFTER PayPal payment has cleared Please allow up to 2 weeks(14 days) for delivery Local pickup pays Utah sales tax Our goal is to be a 5 Star Company. Positive feedback is greatly appreciated and we will generously do the same for you
Ingersoll Rand Avc-10(1x) riveter. Uses.401 shank sets. Great operational condition. Normal usage wear. Posted with eBay Mobile Posted with Please review Shipping and Payments. Items are subject to a $3.00 handling fee. Please wait to pay until an invoice has been sent to allow for these charges to be applied. If incorrect payment is received the item will not be shipped until corrected.
Jiffy 100(1x) riveter. Uses.401 shank sets. Great operational condition. Normal usage wear. Posted with eBay Mobile Item shown is for example only. You will receive an item in similar condition to the one shown. Please review Shipping and Payments. Items are subject to a $3.00 handling fee. Please wait to pay until an invoice has been sent to allow for these charges to be applied. If incorrect payment is received the item will not be shipped until corrected.
Jiffy 300(3x) riveter. Uses.401 shank sets. Great operational condition. Normal usage wear. Posted with Item shown is for example only. You will receive an item in similar condition to the one shown. Please review Shipping and Payments. Items are subject to a $3.00 handling fee. Please wait to pay until an invoice has been sent to allow for these charges to be applied. If incorrect payment is received the item will not be shipped until corrected.
Jiffy model 500(5x) riveter. Uses.498 shank rivet sets. Great operational condition. Normal usage wear. Posted with Please review Shipping and Payments. Items are subject to a $3.00 handling fee. Please wait to pay until an invoice has been sent to allow for these charges to be applied. If incorrect payment is received the item will not be shipped until corrected.
Chicago Pneumatic 9x riveter. Great operational condition. Normal usage wear. Uses.498 shank rivet sets Posted with Please review Shipping and Payments. Items are subject to a $3.00 handling fee. Please wait to pay until an invoice has been sent to allow for these charges to be applied. If incorrect payment is received the item will not be shipped until corrected.
This is a POP(Heli coil) Co. 540 PRG Pneumatic Rivet Gun. Wooks good will shoot up too a quarter inch rivets.
CHICAGO PNEUMATIC CP-0214-T12344 Compression Riveter Air C-Yoke- Very Good Cond- Comes as shown in photos. Lots of scuffs- Good working condition- Make an offer! Normally retails for over $2500( Location BR2) Items will ship just as shown in photo- no extra access. Will be included please look left for our Ebay store categories. Shop our store today! ALSO IN OUR EBAY STORE TODAY: 1000s of drill bits lots of different sockets. Solder* Taps. Reamers and other consumables*Snap On wrenches. Sockets, more! BrowningSplitTaper Bushings and V-Belt Pulleys. Variable etc. many. Many different abrasives, sanding paper, cloth, belts, discs. Sodium bulbs General Electric*Elec. Transformers. Small motors, relays, adaptors*Parker Fittings by the 100s*Fluke meters and leads*hammers&torque meters*circ saw demolition blades tile blades plumbing tools hvac ... moretools AND MUCH MORE! Make us an offer! click here for my store: http:stores.shop.ebay.com/A-Good-Source Reliable Seller. Reliable Tools, Great Prices
Product Description Emhart PRG510 Air Hydraulic Riveter Best selling pneumatic rivet tool in the world. Thousands of users have set millions of rivets with this tool. Designed for high production and trouble free operation. This popularly priced tool is ideal for a variety of applications. Weighs 4 pounds Working pressure: 85 psi Air consumption: 0.0007 cfm per rivet Approx. 10" tall New price: $355 Very good working condition
FOR SALE IS 1 SELLER REFURBISHED#91023 JIFFY/UAT 5/32" 05) SP(STANDARD NOSE ASSEMBLY) LOCKBOLT NOSE ASSEMBLY. INSTALL SHEAR AND TENSION PULL TYPE NAS GP LOCKBOLT FASTENERS. PART NUMBERS: ANVIL: 91023 COLLET: 91026 STD 5/32 ALL PARTS IN GOOD USED CONDITION. WILL INSTALL C6L FASTENERS COMMONLY USED IN TRUCK REPAIRS. WILL NOT INSTALL MAGNAGRIP TYPE FASTENERS. TOOL: HUCK 352 TOOLS PICTURED ARE THE TOOLS FOR SALE. 100% REFUND IF YOU ARE NOT HAPPY WITH PURCHASE RETURNS: PURCHASE PRICE WILL BE RETURNED IF CUSTOMER WISHES AS LONG AS THE TOOL IS RETURNED WITHIN 30 DAYS OF RECORDED DELIVERY DATE. SELLER CHARGES SALES TAX FOR ITEMS SHIPPED TO WASHINGTON STATE(0.090% FREE SHIPPING FOR ALL UNITED STATES BUYERS IN THE LOWER 48. THIS INCLUDES DELIVERY CONFIRMATION. WILL SEND BY USPS FIRST CLASS MAIL(2 TO 5 DAYS DELIVERY TIME) WILL SEND TOOLS WITHIN ... more1 DAY OF CONFIRMED PAYPAL PAYMENT AND EMAIL YOU ON THE DATE TOOLS ARE SENT. WORLDWIDE SHIPPING AVAILABLE AT ADDITIONAL SHIPPING COSTS. LIABILITY: BUYER IS RESPONSIBLE FOR THE SAFE AND PROPER USE OF ITEM(S) PURCHASED FROM ME AND THE BUYER AGREES TO HOLD THE SELLER FREE OF ANY LIABILITY FOR ANY INJURY. LOSS OR DEATH RESULTING FROM THE USE OR MISUSE OF ANY ITEM(S) PURCHASED FROM ME.
FOR SALE IS 1 USED OLD STOCK JIFFY/UAT 1/4" 08) 8992/9003BM SWIVEL NOSE ASSEMBLY. THIS MODEL IS NO LONGER MFG. BY JIFFY BUT IS IN GOOD CONDITION AND FUNCTIONAL. LENGTH FROM GUN LINE 4-13/16" FITS HUCK 353/225/245 CHERRY G-87/ G-85 GUN INSTALLS C6L FASTENERS. WILL NOT INSTALL MAGNAGRIP TYPE FASTENERS. INSTALLS SHEAR& TENSION PULL TYPE NAS GP LOCKBOLT FASTENERS. FEATURES A SNSP SWIVEL ANVIL FOR EASE OF POSITIONING. TOOLS PICTURED ARE THE TOOLS FOR SALE. 100% REFUND IF YOU ARE NOT HAPPY WITH PURCHASE RETURNS: PURCHASE PRICE WILL BE RETURNED IF CUSTOMER WISHES AS LONG AS THE TOOL IS RETURNED WITHIN 30 DAYS OF RECORDED DELIVERY DATE. SELLER CHARGES SALES TAX FOR ITEMS SHIPPED TO WASHINGTON STATE(0.090% FREE SHIPPING FOR ALL UNITED STATES BUYERS IN THE LOWER 48. THIS INCLUDES DELIVERY CONFIRMATION. WILL SEND BY USPS PRIORITY MAIL(2 ... moreTO 3 DAYS DELIVERY TIME) WILL SEND TOOLS WITHIN 1 DAYS OF CONFIRMED PAYPAL PAYMENT AND EMAIL YOU ON THE DATE TOOLS ARE SENT. WORLDWIDE SHIPPING AVAILABLE AT ADDITIONAL SHIPPING COSTS. LIABILITY: BUYER IS RESPONSIBLE FOR THE SAFE AND PROPER USE OF ITEM(S) PURCHASED FROM ME AND THE BUYER AGREES TO HOLD THE SELLER FREE OF ANY LIABILITY FOR ANY INJURY. LOSS OR DEATH RESULTING FROM THE USE OR MISUSE OF ANY ITEM(S) PURCHASED FROM ME.