Micromanipulator Micropositioner Kulicke Soffa Kulicke And Soffa Xyz Probe Positioner Machinist Machineshop Probe Positioner Cascade Microtech Micropositioner Probe Probe Station Micromanipulator Model Rucker Kolls Cascade Microtech Alessi Pull Tester Micromanipulator 3 Test Systems Micro Stop Sheetmetal Xyz Probe Positioner Micromanipulator Wafer Probe Air Vac Swiss Rework Board Machine Vac Swiss Rework Board Machine Nozzle Tools Electricians Avionics Micro Stop Sheetmetal Aircraft Tools Aviation Stop Sheetmetal Aircraft Tools Aviation Machinist 75000 Series Cymer Inc Unitek Miyachi Probe Head Probe Positioner Manipulator Rucker Kolls Model Aircraft Tools Aviation Sheetmetal Aircraft Tools Aviation Machinist Machineshop Kulicke Soffa Model Cascade Microtech Alessi Dcm100 Xyz Probe Microtech Alessi Dcm100 Xyz Probe Positioner Cascade Microtech Dcm Karl Suss Assy Stk Cutter Endmills Machinist Machineshop Tools Aviation Hi Lok Aircraft Aviation Tools Electricians Air Bearing Load Shear Tester Wentworth Labs Zephir Micro Stop Sheetmetal Aircraft Tools Micro Manipulator Canon Plug Pliers Cascade Microtech Summit Wire Bonding Micromanipulator 6200 Manual Probe Hand Ratchet 30 Day Warranty 60 Day Warranty Aircraft Tools Applied Materials Board Pcb Body Shop Bonding Pull Circuit Board Day Warranty Force System Handler Hard Drive Hdd Hi Lok Installed Hp Agilent Ingersoll Rand Lorlin Tested System Machine Magnetics Base Metal Seal Microscope Perkin Elmer Pick And Place Machine Positioner Power Supply Sata Selant Guns Sheetmetal Hi Lok Stainless Steel Table Temperature Force Tested Head Tested Station Tested System Wafer Tested Wire Bonders Rvsi Gauge Control Ball Bonders
 In 
 
Order by: 
Available to: 
Price: 
 - 
$
1003.21
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
The physical condition is good, but there are signs of previous use and handling. Part No: Process Station Cup Assembly. Unmarked Upper Cup. 5004-100005-1_ ... moreCup (Inner). 5004-100006-11 Cup (Under).
$
400.07
Buy It Now
Free Shipping
Condition: New – Open box
Location: Albuquerque, United States
Part No: A124566. This Tokyo Electron cathode adapter assembly is new surplus.
$
604.20
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
The physical condition is good, but there are signs of previous use and handling. Faulhaber Motor Part No: 3557K024CS. Removed from a Nikon OPTISTATION ... more3 200mm Automatic Wafer Inspection System. Part No: X-Axis Motor Assembly.
$
912.10
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
It includes a KLA PCB. System/Tool: P-8 Wafer Prober. KLA PCB: 710-005314-00. These products are subject to export restrictions under U.S. law.
$
2410.60
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
The physical condition is good, but there are signs of previous use and handling. Removed from a Hirata HQPLP-2DHP Quarter Panel Load Port Transfer System. ... moreRemoved from a Hirata HQPLP-2DHP Quarter Panel Load Port Transfer System.
$
310.00
Buy It Now
$22.29 Shipping
Condition: Used
Location: Austin, United States
These products are subject to export restrictions under U.S. law. Item Condition: Used, untested, as-is.
$
308.21
Buy It Now
Free Shipping
Condition: New – Open box
Location: Albuquerque, United States
The physical condition is great. Part No: H7225005. CLAMP,RING ASSY,125MM,CONT COOLED. Serial numbers or country of manufacture may vary.
$
1201.14
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
$
507.11
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
The physical condition is good, but there are signs of previous use and handling. Part No: Cup Wash Disc. These products are subject to export restrictions ... moreunder U.S. law.
$
509.20
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
This DNS Dainippon Screen WNA Wafer Transfer Assembly FC-3000 Wet Station is used working surplus. The physical condition is good, but there are signs ... moreof previous use and handling. Removed from a DNS Dainippon Screen FC-3000 Wet Station System.
$
807.19
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
Removed from a Plasma-Therm SLR 770/770MF Plasma Etching System. The physical condition is good, but there are signs of previous use and handling. Removed ... morefrom a Plasma-Therm SLR 770/770MF Plasma Etching System.
$
305.15
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
The physical condition is good, but there are signs of previous use and handling. Part No: XLdp. Range: 1"WC. These products are subject to export restrictions ... moreunder U.S. law. Serial numbers or country of manufacture may vary.
$
155.16
Buy It Now
Free Shipping
Condition: New – Open box
Location: Albuquerque, United States
The physical condition is great. Part No: E11035740. These products are subject to export restrictions under U.S. law.
$
806.12
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
Model No: BM06607AB. This Nikon encoder assembly is used, working surplus. The physical condition is good and clean, but there are minor scratches from ... moreuse and handling. Encoder Assembly. Removed from Nikon NSR tool.
$
510.21
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Albuquerque, United States
Part No: E11136390. This Varian Ion Implant E11136390 200mm RH Secondary Pick Assembly is manufacturer refurbished surplus. The physical condition is ... moregood, but there may be signs of previous use and handling.
$
350.00
Buy It Now
$76.05 Shipping
Condition: Used
Location: San Jose, United States
We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing ... morepurposes only unless it is attached or stated that it will be included.
$
2011.21
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Albuquerque, United States
This Novellus Systems 02-169211-00 Cover Assembly is refurbished surplus. Includes test report and the units plastic handle has a minor chip (see photos). ... moreThe physical condition is good, but there may be signs of previous use and handling.
$
1012.19
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
This Asyst Technologies 4002-7627-01 IsoPort Loader Assembly 3200-1225-02 is used working surplus. The physical condition is good, but there are signs ... moreof previous use and handling. Serial numbers or country of manufacture may vary.
$
2003.13
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
This Olympus microscope assembly is used, working surplus. The physical condition is good and clean, but has scratches from previous use and handling. ... moreRemoved from a KLA-Tencor CRS-1010S Wafer Confocal Review Station.
$
3803.27
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
The physical condition is good, but there are signs of previous use and handling. Model No: REX. Removed from a Nikon NSR-S306C DUV Scanning System. Hi-T ... moreDrive Motor Part No: RH-11C-3001-E100AL.
$
604.20
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
The physical condition is good, but there are signs of previous use and handling. Faulhaber Motor Part No: 3557K024CS. Removed from a Nikon OPTISTATION ... more3 200mm Automatic Wafer Inspection System. Part No: Y-Axis Motor Assembly.
$
250.00
Buy It Now
$18.32 Shipping
Condition: New
Location: Milpitas, United States
Farmon ID 413708. Fastcom Faulhaber Federal Pioneer Federal Products Co. Futaba Futurestar Galil Motion GaSonics Gast GasTech Gaston Gates GC Valves GD ... moreCalifornia GE Fanuc GE General Electric GE Industrial Services Gems Sensors GEMU General Monitors General Precision General Scanning Genie Industries Genmark Automation GenRad Genwac Georg Fischer Geotest Gespac GF Signet Glassman Glentek Global Laser Gluton West Go Inc.Gould GPI General Precision GPI General Precision Inc.
$
1750.00
Buy It Now
Free Shipping
Condition: Used
Location: Hollister, United States
KLA Tencor 5200 716-450734-00 716-450032-00 Microscope Assembly Housing KLA 5200 Overlay Inspection System for parts. This sale is for a KLA Tencor 5200 ... moreMicroscope Assembly Housing, that is used non-working surplus and is being sold as is for parts.
$
145000.00
Buy It Now
Condition: Used
Location: Morgan Hill, United States
Model : Lam AutoEtch 590. 1.1 The Lam Research Corporation (LRC) Lam AutoEtch590 is an in-Line cassette to cassette, fully automated, single wafer, double ... moreair-locked, parallel plate plasma etching system.
$
807.20
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
Part No: SHU Wafer Shuttle Slider Assembly. The physical condition is good, but there are signs of previous use and handling. 2910-319866-11, BASE(SHU). ... more2910-406965-11, SLIDE ARM. 044-001088-1, SUPPORT,PCB SB6-15 (Qty. ).
$
2001.58
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
This AMAT Applied Materials 0021-11382 is used working surplus. The physical condition is good, but there are signs of previous use and handling. Part ... moreNo: 0021-11382. Installed Part Numbers. Serial numbers or country of manufacture may vary.
$
1350.00
Buy It Now
$23.43 Shipping
Condition: New
Location: Milpitas, United States
Farmon I.D. 421896. AMAT 0090-00655 Motor Assembly, 200w, Servo W/ Brake, Sanyo Denki P50B05020DCS00M, BL Super SC Servomotor. Fastcom Faulhaber Federal ... morePioneer Federal Products Co. Futaba Futurestar Galil Motion GaSonics Gast GasTech Gaston Gates GC Valves GD California GE Fanuc GE General Electric GE Industrial Services Gems Sensors GEMU General Monitors General Precision General Scanning Genie Industries Genmark Automation GenRad Genwac Georg Fischer Geotest Gespac GF Signet Glassman Glentek Global Laser Gluton West Go Inc.Gould GPI General Precision GPI General Precision Inc.
$
2905.12
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
This Tokyo Electron sub unit base assembly cool plate module is used, working. The physical condition is good and clean with minor scratches from handling. ... moreSerial numbers or country of manufacture may vary.
$
650.00
Buy It Now
$23.23 Shipping
Condition: Used
Location: Milpitas, United States
Farmon I.D.417205. The parts show light scratches and dents on the outer casing. IBM IC Electronics ICP Electronics Inc. ICS IDEC IDL Semiconductor IDX ... moreIEE IGC Polycold System Inc. Imtec Acculine IN USA INA InBus Engineering Industrial Computers Inficon Infranor Innova Electronics Integrated Circuit Dev.
$
2500.00
Buy It Now
$15.10 Shipping
Condition: Used
Location: Milpitas, United States
Farmon I.D.420712. AMAT 0010-29842 Assembly, 300mm, DBR, High Temp Belt Wrist, Titanium, Blade Robot Houseing, Endura, 300535-098-0056. IBM IC Electronics ... moreICP Electronics Inc. ICS IDEC IDL Semiconductor IDX IEE IGC Polycold System Inc.
$
508.21
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
Part No: PMA51100. This Bio-Rad PMA51100 Photo Detector Assembly is used working surplus. The physical condition is good, but there are signs of previous ... moreuse and handling. Serial numbers or country of manufacture may vary.
$
906.15
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
Includes pictured cables and cords. The physical condition is good, but there are signs of previous use and handling. Removed from a Bio-Rad Quaestor ... moreQ7 System. Part No: Y8000080. Removed from a Bio-Rad Quaestor Q7 System.
$
1753.09
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
This Oxford Microanalysis 1184060 Opal Link Assembly is used working surplus. The physical condition is good, but there are signs of previous use and ... morehandling. Part No: 1184060. Model No: C.7311. Lister 28 RLR.
$
2450.00
Buy It Now
Free Shipping
Condition: Used
Location: Hollister, United States
This sale is for a KLA Tencor 5100 Wafer Transfer Robot Assembly 710-404208-00 A, which is used working surplus. The physical condition of the assembly ... moreis good and clean. It was removed from a KLA Tencor 5100 overlay inspection system.
$
600.00
Buy It Now
Free Shipping
Condition: For parts or not working
Location: Oxnard, United States
Template By Froo! Cascade Microtech/ Alessi Misc. X-Y-Z Probe Station Positioners& Accessories· WHAT IS IT? This listing is for(1 lot of) used ... moreCascade Microtech/ Alessi Miscellanious X-Y-Z Probe Station Positioners. Parts& Accessories*This sale includes shown components ONLY. No other unseen parts or accessories will be included. DOES IT WORK? Untested/ Unknown. HOWS IT LOOK? Fair. Some cosmetic scuffs or blemishes(see photos) CAN I RETURN IT? No. Returns will not be accepted for these items. Please bid accordingly. Please read the terms below for more information on our store. Policies, and details specific to this listing. About Us Welcome to our online surplus outlet of used test& measurement equipment. Where our goal is to offer you the best prices on overstocked lab and manufacturing products. Our inventory changes daily, so please visit our store often. We pride ourselves in customer satisfaction. So please don't hesitate to contact us directly with your questions or concerns. We can be contacted Monday- Friday, 8am- 5pm PST at(760)806-6600. Payment Our ordering system is fully automated and powered by eBay and PayPal Secure Servers. If you purchase an item through our official store your payment is due immediately upon checkout. Item(s) are also available for sale through channels other than eBay and from time to time may be sold before the eBay auction ends. In which case we reserve the right to end the auction early. We will accept PayPal. Company Check, Personal Check, Bank Check or Major Credit Card. All funds must be in US Dollars and unsecured funds must clear prior to shipment. We will accept wire transfers for an additional $25. We charge sales tax on all orders shipped to California addresses. If you are a California-based business with a resale permit and you would like your invoice adjusted. Please contact us prior to bidding. Shipping DOMESTIC CUSTOMERS: We take care processing and packaging every order. And make every effort to ensure your item(s) are properly package
$
406.15
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
This KLA-Tencor 710-678715-00 SAT Backplane Assembly is used working surplus. The physical condition is great, but there are signs of previous use and ... morehandling. Serial numbers or country of manufacture may vary.
$
350.00
Buy It Now
$13.72 Shipping
Condition: New – Open box
Location: Milpitas, United States
Farmon I.D.419955. IBM IC Electronics ICP Electronics Inc. ICS IDEC IDL Semiconductor IDX IEE IGC Polycold System Inc. Imtec Acculine IN USA INA InBus ... moreEngineering Industrial Computers Inficon Infranor Innova Electronics Integrated Circuit Dev.
$
357.16
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
The physical condition is good, but there are signs of previous use and handling. Removed from a AG Associates 4100s 200mm Heatpulse Rapid Thermal Processing ... moreSystem. Removed from a AG Associates 4100s 200mm Heatpulse Rapid Thermal Processing System.
$
2999.99
Buy It Now
$135.00 Shipping
Condition: Used
Location: Crystal Lake, United States
$
2009.15
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
AMAT 9090-00785ITL Electrode Assembly 3X2H AMAT Quantum Leap II used working. This AMAT 9090-00785ITL electrode assembly is used working surplus. The ... morephysical condition is good there are signs of previous use and handling.
$
2507.22
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
Removed from a Ulvac Technologies Enviro II Dual Chamber Advanced RF Strip System. This Ulvac Technologies Enviro II Chamber Assembly is used working ... moresurplus. The physical condition is good, but there are signs of previous use and handling.
$
1902.12
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
This KLA-Tencor SP1 interface assembly is used, working surplus. SP1 Interface Assembly. Serial numbers or country of manufacture may vary.
$
500.00
Buy It Now
$14.43 Shipping
Condition: For parts or not working
Location: Goleta, United States
This is a part taken from a Vx 330 or Vx 200.
$
1212.10
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
This Tokyo Electron wafer indexer assembly is used, working surplus. It was removed from a P-8 automatic prober tool. System/Tool: P-8 Wafer Prober. Part ... moreNo: 200mm Wafer Indexer Assembly.
$
1204.12
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
This MRC Materials Research A120946 Chamber Assembly is used working surplus. The physical condition is good, but there are signs of previous use and ... morehandling. Part No: A120946. Serial numbers or country of manufacture may vary.
$
303.12
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
This Fostec fiber optic cable assembly is used, working surplus. It was removed from a Nikon OPTISTATION 7 tool. The physical condition is good and clean ... morewith minor scratches from use and handling.
$
450.00
Buy It Now
$127.29 Shipping
Condition: New – Open box
Location: Leander, United States
Questions? Call us: 1-877-328-9236. NEW Applied Materials AMAT 0010-16957 Assembly Liner Top Source 200mm/8" HART. Manufacturer: Applied Materials ... moreAMAT Model: 0010-16957 Condition: New Other Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Applied Materials AMAT Condition: New Other. Comes in non-sealed packaging. The double-bagged cleanroom packaging had some cuts in it. So the unit was removed from its packaging for pictures. This liner is in like new condition with the only two little dings found shown in picture 4. Notes: No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) Applied Materials AMAT 0010-16957 Assembly Liner Top Source 200mm/8" Hart, Specifications: Manufacturer: Applied Materials(AMAT) AMAT Part# 0010-16957, Revision: Rev. 001, Description: Liner Assembly Top Source HART, Size: 200mm(8.00" Weight: 27.45 lbs. Condition: New Other, Quantity: 1, SKU: N17P013 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing t
$
2408.16
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
The physical condition is good, but there are signs of previous use and handling. Removed from a AMAT Applied Materials Orbot WF 736 DUO 200mm Wafer Inspection ... moreSystem. Removed from a AMAT Applied Materials Orbot WF 736 DUO 200mm Wafer Inspection System.
$
80000.00
Buy It Now
Condition: Used
Location: Leander, United States
(1) E-beam Evaporator. Hearth positions are labeled nickel, aluminum, and magnesium fluoride. The system was used for optical coatings. The substrate ... moreholder and shutters are missing and there is no helium compressor.
$
2507.18
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
The physical condition is good, but there are signs of previous use and handling. Removed from a Ultratech Stepper UltraStep 4700 Titan Wafer Stepper ... moreSystem. Serial numbers or country of manufacture may vary.
$
1006.12
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
Model No: 374113. These products are subject to export restrictions under U.S. law. This KLA-Tencor lens focus assembly is used, working surplus. The ... morephysical condition is good and clean, but there are minor scratches from use and handling.
$
1505.12
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
The unit has scuffsThe physical condition is good, but there are signs of previous use and handling. Part No: Wafer Tray Loader Assembly. Serial numbers ... moreor country of manufacture may vary.
$
211.11
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
These Lam Research 839-011516-001 Upper Chamber Assembly Parts are used, working surplus. The physical condition is good, but there are signs of previous ... moreuse and handling. They were removed from a LAM Research Rainbow 4420 Etcher.
$
171.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Application It is widely used in the industries of precision electronics, electronic assembly, pharmaceutical manufacturing assembly lines, printing, ... morepackaging and fine products. Specifications Ion Technology: High Voltage Ionization Static Needle Material: Tungsten Steel Dust Filter: Density 30-40ppi Installation: Dual-purpose Hanging Seat, Iron Plate Paint Bracket Switch Control: Power Switch, Wind Speed Rotary Regulator Input Voltage: 110v/60hz Ion Balance: 0 ± 10v Blower Noise: 59- 69 dba Air Volume Output: 1.39 m³/min Ozone Generation:
$
171.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Application It is widely used in the industries of precision electronics, electronic assembly, pharmaceutical manufacturing assembly lines, printing, ... morepackaging and fine products. Specifications Ion Technology: High Voltage Ionization Static Needle Material: Tungsten Steel Dust Filter: Density 30-40ppi Installation: Dual-purpose Hanging Seat, Iron Plate Paint Bracket Switch Control: Power Switch, Wind Speed Rotary Regulator Input Voltage: 110v/60hz Ion Balance: 0 ± 10v Blower Noise: 59- 69 dba Air Volume Output: 1.39 m³/min Ozone Generation:
$
171.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Application It is widely used in the industries of precision electronics, electronic assembly, pharmaceutical manufacturing assembly lines, printing, ... morepackaging and fine products. Specifications Ion Technology: High Voltage Ionization Static Needle Material: Tungsten Steel Dust Filter: Density 30-40ppi Installation: Dual-purpose Hanging Seat, Iron Plate Paint Bracket Switch Control: Power Switch, Wind Speed Rotary Regulator Input Voltage: 110v/60hz Ion Balance: 0 ± 10v Blower Noise: 59- 69 dba Air Volume Output: 1.39 m³/min Ozone Generation:
$
1212.19
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
Model No: SCAN (Z) ASSY,EBR. Assembly Part No:5087-404285-11 SCAN (Z) ASSY,EBR. 5010-310138-11 ARM(30),EBR 1. 5010-407877-11 GUIDE(EBR),TUBE 1. 5086-403303-11 ... moreSCAN ASSY,EBR 1. The physical condition is good, but there are signs of previous use and handling.
$
1009.12
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
This Lam upper seal plate assembly is used, working surplus. It was removed from a 4420. Lam 4420 Rainbow. These products are subject to export restrictions ... moreunder U.S. law. Item Condition: Used Working, 90 Warranty.
$
2999.00
Buy It Now
$29.05 Shipping
Condition: Used
Location: Carpinteria, United States
WARRANTY IS NULL VOID IF ANY ITEM IS TAMPERED WITH, OPENED OR DISASSEMBLED. System was de-installed in working operational condition. IF THERE ARE ANY ... morePROBLEMS WITH THE ITEM DO NOT TRY TO REPAIR AND INVESTIGATE.
$
1896.99
Buy It Now
Free Shipping
Condition: New
Location: Irvine, United States
MicroscopeNet M83MPTRZ Search in listing titles at our eBay store Search in listing titles& descriptions at our eBay store[Click on images to enlarge] ... moreOMAX 40X-2500X Infinity Trinocular Polarizing Metallurgical Microscope with Transmitted/Reflected Illuminator Part# M83MPTRZ You may bookmark it if you want to buy more than one item. Firefox user press"ctrl+D" Find it later under"Favorites" menu in your browser. This metallurgical microscope can be widely used for metallurgical. Mineral and crystal identification, electronic integrated circuit examination and research. The microscope features attachable polarizing plates and infinity-corrected plan field achromatic objectives. The 100X objective is dry(immersion oil free) and has a longer working distance to create a contact free inspection during use. The microscope uses an EPI illumination system to reflect light off of the specimen through the objectives, allowing for observation of opaque specimens. The long working distance of the 40X(2.8mm) and 100X(0.7mm) objectives makes it possible to inspect rough surfaces. Equipped with both reflected and transmitted illuminator systems. This metallurgical microscope can perform as a normal compound microscope as well. As with all of our microscopes. This microscope comes with a 5 year manufacturer warranty. Features: 4 dry infinity PLAN objectives(4X. 10X, 40X, 100X) on quadruple nosepiece offering 10 magnification settings 30W EPI Kohler halogen reflected illumination with iris aperture and field diaphragm Sturdy metal framework with coaxial coarse and fine focusing Polarizer and analyzer included for transmitted and reflected light Trinocular Siedentopf microscope head Specifications: Model: M83MPTRZ Total magnification: 40x-80x-100x-200x-250X-400x-800x-1000x-2000x-2500X Eyepieces: wide field WF10X/20. WF20X and WF25X Objective: infinity-corrected plan field achromatic DIN 4x. 10x, 40x(Spring, WD 2.8mm) 100x(Spring, Dry, WD 0.7mm) Head: 30°Inclined 360°rotatable trinocular Siedentopf
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
 In 

Former Listings  
 
Disco Engineering Model: UA-002200 Sensor Board
Disco Engineering Model: UA-002100 OPI/F Board. This board was nicely received and looks to be unused. Ver-1 RS-006 Terms of Sale Systech. Inc. provides a 14-Day After Receipt of Product Warranty unless otherwise indicated. Buyer’s identified defective product shall be returned to Systech at Buyer’s expense. Buyer is responsible for obtaining return authorization from Seller. Full refund shall be issued after receipt. Inspection and serial number verification. Refund includes shipping paid outbound from Systech. Due to cost of administration. Purchased products returned due to no longer needed or Buyer purchased error shall be assessed 15% Unit Price) Restock Fee. Buyer is responsible for obtaining return authorization. Shipping paid outbound from Systech is not refundable. Systech ships via USPS and FedEx(Ground and Express) FOB Phoenix. ... morePlease contact Systech prior to paying for product if Express shipping is required. Buyer has option to select alternate transport carrier at Buyer’s expense. Buyer must arrange alternate shipping carrier. Acceptable Payment Methods are: PayPal; Visa; MasterCard or American Express. Credit Card payment is only accepted for domestic ship to locations. Unless otherwise approved by Systech. Local Pick up is acceptable. Applicable tax applies. We thank you in advance for shopping our Store and look forward to continued business with you. Powered by The free listing tool. List your items fast and easy and manage your active items.
FANUC A16B-2200-0840 08F, MAIN CPU PCB MODULE
YOU ARE BIDDING ON ONE FANUC A16B-2200-0840 08F. MAIN CPU PCB MODULE. THIS UNIT WAS REMOVED FROM A WORKING SYSTEM. AND IS GUARANTEED NOT D.O.A. WE HAVE TWO AVAILABLE TO SELL ON EBAY. Estimated Retail Price: $4.003.00 IF THERE ARE ANY QUESTIONS PLEASE CALL 480-200-0156. OR HIT ASK THE SELLER A QUESTION. G5WSE.X2)
Die-Bonder-Semiconductor Equipment Corp 4000 Controller
No Reserve! Semiconductor Equipment Corp 4000 Controller Die Bonder Control Box. Powers Up Great cosmetic Shape! Sold as is.
Metal Flex 3" Bellow
The item for sale in this listing is a Metal Flex 3" Bellow. Part No: B0048880 Rev.E, Made In USA 09/04, PFZ Inv. 1110, MB. PFZ Recovery is a world wide industrial demolition and investment recovery company. We will do our best to present quality products in good working order in hopes of building buyer trust and return business. We have more items than we could possibly hope to list with new inventory arriving all the time. If you do not see what you are looking for here. Call 803-428-4510, we may have just what you are looking for. All of our products come from working environments and are usually in good working order when we receive them. But as we are unable to fully test each piece. All items are sold AS IS. Is is the responsibility of the buyer to ensure the suitability of every item sold for the buyer's application. We assume ... moreno responsibility for the improper or incorrect use of any item we sell or if it fails in use. Also. We do our best to research each item and provide information but we will not be held liable for any incorrect information or lack thereof in this listing. If you have a question about the item, contact us. There are no warranties expressed or implied other than stated in this listing. Pick up at our Bishopville. South Carolina warehouse is welcomed but otherwise the buyer is responsible for all shipping related charges. We DO NOT use shipping and handling as a profit point and our goal is to provide the best and most expedited shipping at cost for your purchase. Buyer is also responsible for all customs and duty related charges or fees for international shipments. Call or email our office for a shipping quote and to work out the details if not specified in this listing. A full address is needed for a shipping quote and you must specify if your shipping address is a business or residential address as scheduling freight deliveries to residential addresses will add charges to the shipping transaction. If your purchase requires freight shipping. DO NOT send payment or check out t
MicroAssembly MAT 6400 Automatic Die Attach System
MicroAssembly Technologies 6400 Automatic Thermal Die Attach System/Bonder Comes with a what you see in the pictures. If you don't see it. You probably wont get it. Specifications are from MicroAssembly Technology and may vary slightly due to upgrades. Options, or revisions this unit may or may not have. This unit was Intel Surplus. It was removed from service in working condition. They had advertised it as a Thermal Die Attach System/ Flip Chip Bonder. We do not have the expertise or the facilities to formally test this unit and are selling it as-is. There appears to be some miscellaneous parts for the unit including different sized chucks in the blue-bin in the picture of the back of the unit. Base List Price is: $150.000.00 to $220,000.00 NEW from MAT The Unit's Serial Number Tag Reads: Model Number: 6400 Serial Number: 802 Power ... moreRequirements: 220 V. 50/60 Hz, 16 A, 3520 VA Weight: 160 kg. Date of Manufacture: 12/03 Key Features: Flexible. Fully automatic die attach system controlled by user friendly Windows XP based software. Model 6400 performs cold and hot processes for MCM. Flip Chip, Eutectic, and Ultrasonic assemblies. Very high placement accuracy of 3 microns@ 3 sigma(process dependent) is ensured by the closed loop servo systems and the high resolution digital vision system Handles active and passive components with sizes between 200 microns up to over 25 mm. Pick from up to thirty 2" or nine 4" Waffle or Gel packs. Pick from Wafers up to 300 mm Pick from up to 8 Tape& Reel feeders. Specializing in unusual die sizes and aspect ratios. The volumetric dispenser applies adhesive in programmable shapes. Stamping(Pin Transfer) applies adhesive dots as small as 75 microns. Full Flip Chip capability including chip flipping. Bump fluxing and chip final alignment over up looking camera. Handles CCD and other sensors. LCD's, MEMS and other sensitive devices Unique die staking capability. Specification Highlights: Work Area: Up to 12" x 10" Die Size: 0.200 to over 50 mm. Die Th
PERKIN ELMER 677-5998-001 677-9477-002 BRAKE ASSY
PERKIN ELMER 677-5998-001 677-9477-002 ASSEMBLY Perkin Elmer adjustable slit assembly used on the Perkin Elmer 100. 200, and 300 series projection aligners. ITEMS ARE SPARE PARTS. NICE CONDITION, COME GUARANTEED OPERATIONAL! CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. Please notify us if we will be shipping to a business or a residence. Shipping and handling continental US via DHL ground. International buyers and unusual domestic shipping please E-mail in advance for shipping and handling charges. PAYMENTS Payment(s) for purchases ... moreare made via PayPal. Visa, MasterCard or American Express Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# Systech Inc. will wait 10 days for all checks to clear before shipping. Please send payments to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shippin
Disco Engineering Model: UA-082300 D3 CPU Board
Disco Engineering Model: UA-082300 D3 CPU Board. This board was nicely received and looks to be unused. Additional Markings: RN-006 Ver-3 CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. Insurance is optional. Please notify us if we will be shipping to a business or a residence. Shipping and handling continental US via DHL ground. International buyers and unusual domestic shipping please E-mail in advance for shipping and handling charges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, MasterCard or American Express ... moreRemit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powered by The free listing tool. List your items fast and easy and manage your active items.
Disco Engineering Model: UA-001700 Timer Board
Disco Engineering Model: UA-001700 Timer Board. This board was nicely received and looks to be unused. Additional Markings: RC-007 Ver-2 Terms of Sale Systech. Inc. provides a 14-Day After Receipt of Product Warranty unless otherwise indicated. Buyer’s identified defective product shall be returned to Systech at Buyer’s expense. Buyer is responsible for obtaining return authorization from Seller. Full refund shall be issued after receipt. Inspection and serial number verification. Refund includes shipping paid outbound from Systech. Due to cost of administration. Purchased products returned due to no longer needed or Buyer purchased error shall be assessed 15% Unit Price) Restock Fee. Buyer is responsible for obtaining return authorization. Shipping paid outbound from Systech is not refundable. Systech ships via USPS and FedEx(Ground and ... moreExpress) FOB Phoenix. Please contact Systech prior to paying for product if Express shipping is required. Buyer has option to select alternate transport carrier at Buyer’s expense. Buyer must arrange alternate shipping carrier. Acceptable Payment Methods are: PayPal; Visa; MasterCard or American Express. Credit Card payment is only accepted for domestic ship to locations. Unless otherwise approved by Systech. Local Pick up is acceptable. Applicable tax applies. We thank you in advance for shopping our Store and look forward to continued business with you. Powered by The free listing tool. List your items fast and easy and manage your active items.
TTi TriboCop T1000C SpinStand, Hard Drive / Wafer Testing Unit
Item up for sale is a: TTi TriboCop T1000C SpinStand Hard Drive/ Wafer Testing Unit Item is used and is untested other than what is indicated below: Unit Is Untested& We Are Unable To Test The Unit- If you have any questions regarding this item please feel free to contact me and I will do my best to answer your questions 1 item as shown in picture. Picture represents the actual item. 40 Pounds in a box with packaging materials Included is only what is mentioned. No other cables. Parts, power cords, power adapters, software or any other accessories included. ============================================================================ Terms of Sale Payment Options PayPal only or contact us for payment methods to pay on pickup. Bank transfers or payments using a Cashier’s Check may be available. Contact us for additional information and ... morefees. RETURNS Warranty for Items shipped in the US 14-Day Right to Return- Buyer has 14 days to test item to determine its operational condition unless it was listed as Parts-Only or As-Is. Should the item be received non-operational you may return the item for refund of the purchase price. 14-day period starts the day you receive the item. You cannot return an item because it is not compatible with the system you installed the item into. Please insure that the item you are purchasing is compatible with the application or in the system you intend to use it. Warranty for Items shipped outside the United States All international sales shipped to a destination outside the US are non-refundable. All international sales are final. SHIPPING Shipping within the United States Buyer is responsible for all shipping costs including returns. Please note for domestic shipments(within US) we ship FedEx ground only. But you can use UPS ground shipping rates(calculated automatically by eBay) to estimate the shipping charges. Actual FedEx ground rates may be cheaper then UPS depending on the destination, so for heavy packages you can always contact us to get the exact shipping rate. FedEx do
Synopsys ForteLink Gemini II ASIC Emulator with Power Supply 11X Virtex 4 FPGA
Synopsys ForteLink Gemini II ASIC Emulator with Power Supply 11X Virtex 4 FPGA Recently removed from working service. ForteLink Power Supply included. NO cables or Software included. Board has(9) Xilinx Virtex 4 XC4VLX200 and(2) Xilinx Virtex 4 XC4VLX80 FPGA Chips. Excellent cosmetic condition. Guaranteed to be working perfectly. Packed professionally in Instapak 2 part foam for added shipping security! NO 3rd party shipping on buyer accounts California residents must pay 8.5% Sales Tax. Businesses purchasing for resale must provide CA state tax ID information. Payment is due within 7 days of auction's end. Buyer pays for shipping SEE BELOW. When possible. Multiple items will be shipped together to reduce shipping costs. Insurance for the amount of the auction is included in the shipping price. Flat fee shipping amounts apply to lower ... more48 states ONLY! OVERSEAS BUYER PLEASE CONTACT ME REGARDING ACCEPTED PAYMENT METHODS BEFORE MAKING A PAYMENT. If you need additional information or have any questions. Please contact me BEFORE placing your bid. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Listing created with from Black Magik Software.
Temptronic TPO412A 260 Temperature Forcing System
Temptronic TPO412A 260 Temperature Forcing System This item has been used previously and may show some signs of wear. This item is sold as is/where is. We are price-flexible. Contact/visit us at your most convenience. QUALITY EQUIPMENT SOURCE LLC is a surplus company with approximately 50.000sq ft of warehousing, where you will find almost any type of Semiconductor Equipment or other. Back-end, front-end, metrology and facility equipment we especialize and take pride in delivering to you the best in the market. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13f35293d87-0x103-
Thermonics T2427 / T2420 Precision Temperature Forcing System
Thermonics T2427/ T2420 Precision Temperature Forcing System This item has been used previously and may show some signs of wear. This item is sold as is/where is. We are price-flexible. Contact/visit us at your most convenience. QUALITY EQUIPMENT SOURCE LLC is a surplus company with approximately 50.000sq ft of warehousing, where you will find almost any type of Semiconductor Equipment or other. Back-end, front-end, metrology and facility equipment we especialize and take pride in delivering to you the best in the market.
Temptronic TPO4000A-2B21-2 Temperature Forcing System
Temptronic TPO4000A-2B21-2 Temperature Forcing System This item has been used previously and may show some signs of wear. This item is sold as is/where is. We are price-flexible. Contact/visit us at your most convenience. QUALITY EQUIPMENT SOURCE LLC is a surplus company with approximately 50.000sq ft of warehousing, where you will find almost any type of Semiconductor Equipment or other. Back-end, front-end, metrology and facility equipment we especialize and take pride in delivering to you the best in the market. f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13f35293d12-0x105-
LTH Electronics MCD53P4 Digital Conductivity Controller Used Working
This LTH Electronics MCD53P4 is used working surplus.The physical condition is good. But there are some minor scratches from previous use and handling. Part No: MCD53P4 Model: MCD53 Serial No: 807001 85-250V Made in England Condition: Used Working. 90 Day Warranty Estimated Packed Shipping Dimensions: L x W x H = 8"x8"x8" 6 lbs. Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 90-Day Satisfaction Guarantee(See Details Below) Lister ... more12 Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 5:00 pm(MST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30 am to 4:00 pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505-345-8732, Fax: 505-345-8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) We cannot process the order until we receive tax from the following states NM. AZ and TX or a copy of your State Nontaxable Transaction Certificate(NTTC) A 7% Sales Tax applies to all purchases in NEW MEXICO. A 8.8% Sales Tax applies to all purchases in ARIZONA. A 8.25% Sales Tax applies to all purchases in TEXAS. All items will be securely packaged or palletized and shipped via the best and most economical way possible. Shipping and handling times may vary based on the
VERTEQ MEGASONIC DISPLAY CONTROLLER
VERTEQ MEGASONIC DISPLAY CONTROLLER Description: Thank you for your interest! We are auctioning off this VERTEQ MEGASONIC DISPLAY CONTROLLER. Acquired from government surplus. As you know with most government agencies. When a new grant comes in, they have to justify the grant by buying new equipment leaving very useful equipment for surplus. Comes as shown. Display protective coverings is worn and cracked up some. USA CUSTOMERS- NO MEANS TO TEST. However will offer a 14 day guarantee to try it out fully with right of return. INTERNATIONAL CUSTOMERS- NO MEANS TO TEST. And due to the cost to ship internationally and the distance items have to travel, ALL items shipped outside of the USA are SOLD AS IS WITH NO GUARANTEES. We love our international customers and would love to have your business but due to the nature of the used equipment, and ... morethat all items are untested and used, all sales are final. No refunds or returns, please bid accordingly! 1. All equipment is sold-as-is. We are surplus equipment dealers and do not have the ability or knowledge to test equipment for functionality beyond plugging it in and describing what we observe as best we can. 2. All statements regarding products and their configurations are made to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. 3.We have no knowledge of the history of the equipment. Due to the nature of used and surplus equipment no guarantees or warranties either expressed or implied are offered unless specifically noted in the description. 4. NO REFUNDS OR RETURNS will be allowed. No exceptions unless offered in the description. 5. No manuals.NO STANDARD POWER CORDS, accessories, software etc are included unless pictured and noted in the description. 6. It is the bidder's responsibility to understand that the terms of the auction. The nature of equipment offered and bid accordingly. Shipping: BUYER TO PAY SHIPPING IN THE US. Alaska& Hawaii will be more! INTERNATIONAL BIDDERS WEL
Agilent E6978-69515 with 60 day warranty
Agilent Model: E6978-69515 Item comes from a clean room tool and is in good. Working condition with 60 day warranty. Buyer responsible for shipping costs both ways. Please visit my store. We have similar items and will be happy to combine items to reduce shipping costs. I may also have multiple quantities so please write me if you need more of a particular item or have any other questions. Thanks for looking and have a nice day!
TESEC TEST SYSTEM 8101-TT/A WITH SPECTRA PC UPGRADE
TESEC TEST SYSTEM 8101-TT/A WITH SPECTRA PC UPGRADE Currently on board a ship for delivery to Boston. ETA first week of July 2013. Please advise your interest.or make an offer.
TESEC TEST SYSTEM 9318-HV 3KV 3000V HIGH VOLTAGE TEST OPTION MODULE STATION
TESEC TEST SYSTEM 9318-HV 3KV 3000V HIGH VOLTAGE TEST STATION OPTION Currently on board a ship for delivery to Boston. ETA first week of July 2013. Please advise your interest.or make an offer.
TESEC TEST SYSTEM 4KV 4000 VOLT POWER SUPPLY
TESEC TESTER TEST SYSTEM 4KV 4000 VOLT POWER SUPPLY This option will add 4000 volt test capacity to your system. Currently on board a ship for delivery to Boston. ETA first week of July 2013. Please advise your interest.or make an offer.
TESEC SPECTRA TEST SYSTEM 881-TT/A DISCRETE COMPONENT SEMICONDUCTOR TESTER
TESEC TESTER 881-TT/A Will test high power transistors. Fets, diodes, scr, and other three lead devices. Currently on board a ship for delivery to Boston. ETA first week of July 2013. Please advise your interest.or make an offer.
LORLIN TEST FIXTURE FOR FETS TRANSISTOR DIODE TESTING CONVERT FOR OTHER DEVICES
LORLIN SUPER STATION TEST FIXTURE. Easily converted to test other transistors. Fets, diodes and many discrete components. Corporate invoice available for your guaranteed reimbursement. International shipping will cost more.
TESEC TEST SYSTEM MANUAL SCHEMATICS CIRCUIT DIAGRAMS TESTERS 881-TT/A 8001 8101
TESEC TEST SYSTEM MANUAL SCHEMATICS CIRCUIT DIAGRAMS FOR TESTERS 881 8001 8101. MORE PICS AVAILABLE. Includes board. Module, system and cable engineering drawings. Corporate invoice available for your guaranteed reimbursement. International shipment will need to be calculated.
Kulicke & Soffa P/N: 00835-4555-000-03 PRS I/F Board
Kulicke& Soffa P/N: 00835-4555-000-03 PRS Interface Board. Board was identified as"Good Spare" CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, MasterCard or American Express Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except ... morefor damage or incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powered by The free listing tool. List your items fast and easy and manage your active items.
Kulicke & Soffa Model: 01471-1006-000-06 Mother Board
Kulicke& Soffa Model: 01471-1006-000-06 Mother Board Board was identified as"Good Spare" CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, MasterCard or American Express Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for ... moredamage or incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powered by The free listing tool. List your items fast and easy and manage your active items.
Kulicke & Soffa: 00797-4210-000 Video Processor Board
Kulicke& Soffa: 00797-4210-000 Video Processor Board. Board is identified as"Good Spare" CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, MasterCard or American Express Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for ... moredamage or incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powered by The free listing tool. List your items fast and easy and manage your active items.
VXI Technology SMP4003 MATRIX2(4x16)1(4x4) 2A/CH
THIS AUCTION IS FOR A USED VXI TECHONOLGY MODEL No. SMP4003 PART No. 70-0178-000 SERIAL No. 560456A Highest Density 2-wire Matrix Available on the Market(4x216 in 2 VXIbus Slots) Extensive Signal Shielding Employed on PCBs for Excellent Signal Fidelity Matrices Built up Using 4x4 Building Blocks for Configuration Flexibility 2A Switching per Path 2(4x16) and 1(4x4) 2-wire matrices 2A 300VDC 60WDC. 125VA More than 28 MHz Bandwidth Overview The SMP4000 series high-density matrix modules allow the user to connect any row to any column. The smallest building block is a(4x4) 2-wire matrix. And rows and columns can easily be expanded to form larger matrices. A(4x216) 2-wire matrix can be accommodated in a double-slot VXIbus card(SM1200) Various configurations are shipped from the factory, and the user also has the capability to define a custom ... moreconfiguration using the available 9(4x4) building blocks. Complete block diagrams for each configuration can be found in the SMIP II ™ manual. UNIT IS NOT TESTED- UNKNOWN CONDITIONS UNIT HAS BEEN PREVIOUSLY USED. MAY HAVE SOME SIGNS OF COSMETIC WEAR, UNKNOWN IF IT'S FULLY OPERATIONAL OR FUNCTIONAL. NO INTERNATIONAL. UNIT IS SOLD AS DESCRIBED PLEASE BID ACCORDINGLY. SHIPPING AND HANDLING. $15.00 ALL WINNING BIDS PAID WITHIN 7 DAYS OF AUCTION END. GOOD LUCK!
MKS Baratron 223BD-00001AABS 2 Torr Pressure Transducer
Item Description Manufacturer: MKS Model: MKS Baratron 223BD-00001AABS 2 Torr Pressure Transducer. Condition: Refurbished. Unused since Calibration. Certification/Calibration Status: Calibrated with No Certification Except Tag on Body Technical Description: +- 15VDC input 0-10VDC output 2 torr FVCR Warranty All items are sold with a 30 day warranty as follows: Items damaged in shipment. Non-functional upon arrival, or incorrectly listed-Buyer wil receive a full refund of all cost, including return shipping. Where multiple items are in inventory, Seller will offer to replace the item at buyer's option. The Seller will advise regarding method of return shipping. Items purchased incorrectly by Buyer. Seller will process a refund for the item. Less Seller's original cost of shipment, upon receipt of the item in undamaged, unused, and ... moreun-opened sealed bag condition. Please note: Some items have greater value because they are either new, or refurbished, and are still sealed with the original certification from the manufacturer or the refurbisher. In the event that a sealed package is opened, the refund will be discounted to reflect this loss of chain-of-custody. All return shipping will be at the Buyer's cost. As you see from our feedback. We take pride in maintaining a very positive relationship with our buyers. Please contact us immediately if there is an issue with your purchase. We will normally respond within 24 hours to any inquiry, so if you don't get a response, email again! We want your repeat business, and will do our very best to accommodate your needs. We have a strong professional mechanical and process engineering capability in our business and can answer technical questions quickly. Shipping Shipping Terms: All domestic USA shipping is free. Method of domestic shipping is at seller's option. International shipping will be at buyer's cost as listed. We know that time is money in your business. So we ship either same or next business day after your order is paid for, depending on wh
HORIBA STEC Injection Valve IV-2410AV-02-180S, Refurbished, Unused Since
Item Description Manufacturer: HORIBA STEC injection valve Model: IV-2410AV-02-180S. Condition: Refurbished. Unused Since Refurbishment/Calibration. Certification/Calibration Status: Calibrated with certification. Warranty All items are sold with a 30 day warranty as follows: Items damaged in shipment. Non-functional upon arrival, or incorrectly listed-Buyer will receive a full refund of all cost, including return shipping. Where multiple items are in inventory, Seller will offer to replace the item at buyer's option. The Seller will advise regarding method of return shipping. Items purchased incorrectly by Buyer. Seller will process a refund for the item. Less Seller's original cost of shipment, upon receipt of the item in undamaged, unused, and un-opened sealed bag condition. Please note: Some items have greater value because they ... moreare either new, or refurbished, and are still sealed with the original certification from the manufacturer or the refurbisher. In the event that a sealed package is opened, the refund will be discounted to reflect this loss of chain-of-custody. All return shipping will be at the Buyer's cost. As you see from our feedback. We take pride in maintaining a very positive relationship with our buyers. Please contact us immediately if there is an issue with your purchase. We will normally respond within 24 hours to any inquiry, so if you don't get a response, email again! We want your repeat business, and will do our very best to accommodate your needs. We have a strong professional mechanical and process engineering capability in our business and can answer technical questions quickly. Shipping: Shipping Terms: All domestic USA shipping is free. Method of domestic shipping is at seller's option. International shipping will be at buyer's cost as listed. We know that time is money in your business. So we ship either same or next business day after your order is paid for, depending on when it is received. Where multiple purchases are made. Combined shipments will be mad
STEC LF-410A-EVD, TEOS, 3 g/min Liquid Flow Meter, Refurbished, Unused Since
Item Description Manufacturer: STEC. Model: LF-410A-EVD Liquid Flow Meter Condition: Refurbished. Unused Since Calibration Certification/ Calibration Status: Calibrated with Documentation Technical Description: Fluid: TEOS 3.0 g/min Warranty All items are sold with a 30 day warranty as follows: Items damaged in shipment. Non-functional upon arrival, or incorrectly listed-Buyer will receive a full refund of all cost, including return shipping. Where multiple items are in inventory, Seller will offer to replace the item at buyer's option. The Seller will advise regarding method of return shipping. Items purchased incorrectly by Buyer. Seller will process a refund for the item. Less Seller's orginal cost of shipment, upon receipt of the item in undamaged, unused, and un-opened sealed bag condition. Please note: Some items have greater ... morevalue because they are either new, or refurbished, and are still sealed with the original certification from the manufacturer or the refurbisher. In the event that a sealed package is opened, the refund will be discounted to reflect this loss of chain-of-custody. All return shipping will be at the Buyer's cost. As you see from our feedback. We take pride in maintaining a very positive relationship with our buyers. Please contact us immediately if there is an issue with your purchase. We will normally respond within 24 hours to any inquiry, so if you don't get a response, email again! We want your repeat business, and will do our very best to accommodate your needs. We have a strong professional mechanical and process engineering capability in our business and can answer technical questions quickly. Shipping Shipping Terms: All domestic USA shipping is free. Method of domestic shipping is at seller's option. International shipping will be at buyer's cost as listed. We know that time is money in your business. So we ship either same or next business day after your order is paid for, depending on when it is received. Where multiple purchases are made, combined ship
STEC LF-310A-EVD, TBTDETa, 0.2 g/min Liquid Flow Meter, Refurbed, Unused Since
Item Description Manufacturer: STEC Model: LF-310A-EVD Liquid Flow Meter. Condition: Refurbished. Unused Since Calibration. Certification/ Calibration Status: Calibrated with Documentation. Technical Description: Fluid: TBTDETa. 0.2 g/min Warranty All items are sold with a 30 day warranty as follows: Items damaged in shipment. Non-functional upon arrival, or incorrectly listed-Buyer wil receive a full refund of all cost, including return shipping. Where multiple items are in inventory, Seller will offer to replace the item at buyer's option. The Seller will advise regarding method of return shipping. Items purchased incorrectly by Buyer. Seller will process a refund for the item. Less Seller's original cost of shipment, upon receipt of the item in undamaged, unused, and un-opened sealed bag condition. Please note: Some items have ... moregreater value because they are either new, or refurbished, and are still sealed with the original certification from the manufacturer or the refurbisher. In the event that a sealed package is opened, the refund will be discounted to reflect this loss of chain-of-custody. All return shipping will be at the Buyer's cost. As you see from our feedback. We take pride in maintaining a very positive relationship with our buyers. Please contact us immediately if there is an issue with your purchase. We will normally respond within 24 hours to any inquiry, so if you don't get a response, email again! We want your repeat business, and will do our very best to accommodate your needs. We have a strong professional mechanical and process engineering capability in our business and can answer technical questions quickly. Shipping: Shipping Terms: All domestic USA shipping is free. Method of domestic shipping is at seller's option. International shipping will be at buyer's cost as listed. We know that time is money in your business. So we ship either same or next business day after your order is paid for, depending on when it is received. Where multiple purchases are made. Combin
SCHAFFNER POWER FILTER FN356-25-24
SELLING AS USED. BUT I BELIEVE IT IS NEW OLD STOCK. MISSING THE BOX. SCHAFFNER FN356-25-24 440/250VAC/50-60Hz 25A@40C-25=85C Any questions please email or feel free to call Delaney's Surplus at 608-643-8009 If buying and needs freight please email your zip code and if it is a business with a dock. Closed Tuesdays and Wednesdays.
Dage-MTI Model: NC-67X Camera Control Unit
Dage-MTI Model: NC-67X Camera Control Unit. This unit was tested for power only. CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, MasterCard or American Express Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect ... moreinformation. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powered by The free listing tool. List your items fast and easy and manage your active items.
OAI / Optical Associates, Inc: 354 Exposure Monitor
OAI/ Optical Associates. Inc: 354 Exposure Monitor. We did not receive AC Adapter with this tool, therefore we cannot test. Sold w/o Probe. CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. PAYMENTS P ayment(s) for purchases are made via PayPal. Visa, MasterCard or American Express. Please send payments to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction ... moreearly except for damage or incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powered by The free listing tool. List your items fast and easy and manage your active items.
FTS SYSTEM CP-4-80 LAB MIXER WORKING
THIS IS A FTS SYSEM MIXER CP-4-80 WORKING. Shipping on this item is 18.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. We also accept on large purchases wire transfers. All Items will be shipped out within 48 hours of purchase if it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item5. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-13f46bafab0-0xfe-
Comair Rotron: JQ24B4X Fan, 24VDC, 1.0A Tested Good
Comair Rotron: JQ24B4X Fan. 24VDC, 1.0A. Fan tested good and noise free. CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, MasterCard or American Express QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose ... moreand assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powered by The free listing tool. List your items fast and easy and manage your active items.
KULICKE & SOFFA 4590-44-0 PCB BOARD
KULICKE& SOFFA 4590-44-0 PCB BOARD BOARDS ARE FROM SPARES. UNTESTED. CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, MasterCard or American Express Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# QUESTIONS Please E-mail us with your questions to or call our phone is: 602) 437-0100. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect information. DISCLAIMER Systech Inc. makes ... moreno representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powered by The free listing tool. List your items fast and easy and manage your active items.
VEECFOUR POINT PROBE MODEL FPP5000 TESTED
YOU ARE BIDDING ON A VEECO FOUR POINT PROBE MODEL FPP5000 SOME DETAILS: Specifications for Veeco FPP-5000 MEASUREMENT FUNCTIONS AND RANGE: Digital computation allows the direct. Error tree, display ot sheet resistivity in ohm/square from 1.1mohm/sq to 450Kohm/sq, slice resistivity in ohm-centimeters from 4.19 x 10-2mohm-cm to 17.1Kohm-cm, V/I in ohms from 0.25mohm to 99.9Kohm or metallization thickness in kiloangstroms from 20 A to 243 KA. Use of graphs, tables or mechanical calculations and other associated errors are totally eliminated. OPERATION: Operator simply places wafer on molded wafer carrier. And closes RFI/light shield to initiate test. Unit automatically ranges to correct range and displays correct reading including decimal point and multiplier and wafer type simultaneously. Reading is held to assist in data logging until next ... moretest is initiated. PROBE HEAD: Convenient plug-in probe head/adapter assembly permits changing or replacing of worn probe heads in minutes without special tools or alignment fixtures. Alessi probe heads are provided as standard equipment. K&S heads are optional. CONSTANT FORCE MECHANISM: The FPP-5000 utilizes a probe up configuration. This probe up technique assures repeatable probe pressure at every test independent of operator force and substrate thickness. PROBE TIP AND WAFER PROTECTION: The probe tips remain below the stage of the FPP-5000 until the cover is lowered. Eliminating damage to the wafer. Probe tips remain unpowered until after contact with wafer to eliminate arcing with consequent probe tip erosion and wafer pitting. RFI/LIGHT SHIELD: Cast aluminum RFI/Light Shield eliminates problems due to radio frequency noise and photoelectric effects when measuring high resistivity layers. DIRECT DIGITAL DISPLAY: Test results are displayed on direct five digit LED display. PENETRATION FUNCTION: Built-in penetration function applies a 170V. 4 msec pulse to probes through a 10M resistance prior to test for low contact resistance if desired. Penetrate function is front pane
DISCO EAUA-201500 UA-201500 EAUAUA-201500 BOARD
DISCO EAUA-201500 UA-201500 EAUAUA-201500 BOARD BOARD IS FROM SPARES. COMES WITH A 7-DAY TEST WARRANTY! CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. Please notify us if we will be shipping to a business or a residence. Shipping and handling continental US via DHL ground. International buyers and unusual domestic shipping please E-mail in advance for shipping and handling charges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, MasterCard or American Express Remit Payments To: Systech. Inc. 4439 South 38th Place, ... morePhoenix, Arizona 85040. Attn: EBay Auction# Systech Inc. will wait 10 days for all checks to clear before shipping. Please send payments to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 QUESTIONS Please E-mail us with your questions or call our phone is: 602) 437-0100. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3F
SHARP PRECISION Model SP 112 Delidder / Cover Remover
C3330. SHARP PRECISION Model SP 112 Delidder/ Cover Remover- Tests OK- 115VAC- 10 Amps- There is a pressure operated electrical switch in the power circuit so the unit must have air pressure applied before it can be turned on. Unit cycles as it should. As the slide table extends. One of the aluminum angles throws a toggle switch as shown in the last photo. The slide then returns to the starting point and the second aluminum angle resets the toggle switch- No manual- Power cord is frayed where it enters the enclosure and should be replaced. We combine shipping whenever possible.
Kulicke & Soffa P/N: 00835-4554-000-01 Board
Kulicke& Soffa P/N: 00835-4554-000-01 Board. Good Spares" CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, MasterCard or American Express Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect information. ... moreDISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powered by The free listing tool. List your items fast and easy and manage your active items.
Kulicke & Soffa P/N: 01482-4000-000 Board, Rev. K
Kulicke& Soffa P/N: 01482-4000-000 Board. Rev. K. Good Spares" CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, MasterCard or American Express Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect information. ... moreDISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powered by The free listing tool. List your items fast and easy and manage your active items.
Kulicke & Soffa P/N: 01483-4027-000-01 Videobulkhead B
Kulicke& Soffa P/N: 01483-4027-000-01 Videobulkhead Board. Good Spares" CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, MasterCard or American Express Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect ... moreinformation. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powered by The free listing tool. List your items fast and easy and manage your active items. e5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-13f46bafa8f-0xe3-
Kulicke & Soffa P/N: 00835-4580-000-60 Video Board
Kulicke& Soffa P/N: 00835-4580-000-60 Video Board. Good Spares" CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, MasterCard or American Express Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect information. ... moreDISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powered by The free listing tool. List your items fast and easy and manage your active items.
Kulicke & Soffa P/N: 06100-4231-000-16 Half Step Cntlr
Kulicke& Soffa P/N: 06100-4231-000-16 Half Step Controller. Board was identified as"Good Spare" CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, MasterCard or American Express Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except ... morefor damage or incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powered by The free listing tool. List your items fast and easy and manage your active items.
Kulicke & Soffa P/N: 06300-4534-0 Board, Rev. F
Kulicke& Soffa P/N: 06300-4534-0 Board. Rev. F. Board was identified as"Good Spare" CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, MasterCard or American Express Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for damage ... moreor incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powered by The free listing tool. List your items fast and easy and manage your active items.
Word Precision micromanipulator M3301R
Description, World's most widely used micromanipulator Weighing just 550 grams and employing a slim space-saving design. This well-built micromanipulator outsells all others worldwide for electrode placement where magnification is in the range of 250x. Its design allows units to stand tightly grouped- since all control knobs project to the rear. And because control knobs are clustered within an 8 cm area in a single vertical plane, resolution is quick- the hand works blindly while the eye monitors the microscopic image. Vernier scales allow readings to 0.1 mm; x-axis fine control allows readings to 10 microns. The instrument employs rack-and-pinion drive. V-shaped guideways, and cross roller bearings, so all movement is sure and repeatable, without drift, sideplay, backlash, or sticking. Contact parts are milled of hardened steel for ... morehigh performance and long life. Left- or right-handed versions of the M3301 are supplied with a standard 12 mm clamp. Standard accessories provided include one microelectrode holder and a securing bolt and wrench. Resolution Travel Range X-axis Fine 10 mm- 0.01 mm X-axis 37 mm- 0.1 mm Y-axis 20 mm- 0.1 mm Z-axis 25 mm- 0.1 mm Looks to be in good condition with all axis moving smoothly.
XYZ Micromanipulator Made in Germany
XYZ micromanipulator made in Germany. Looks like new with few scratches around. All movements move smoothly and fully. Free shipping only for US continental. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-13f52c71e33-0xf1-
Brinkmann micromanipulator
Brinkmann XYZ micromanipulator. All movements and vectors move smoothly and fully. Some scratches and rust. Free shipping for US continental only.
TECHNOBOX 3240 PMC IDE CONTROLLER 44-PIN FRONT PANEL CONNECTOR (USED)
TECHNOBOX 3240 PMC IDE CONTROLLER 44-PIN FRONT PANEL CONNECTOR* These items are tested and come with a 14 day warranty. For more information please send me a message. Please note that I do my best to respond to all of your inquiries as soon as possible but I may not during the weekends in which case I will do my best to respond on the following business day. Payment: We accept pay pal. Credit cards, and cashiers checks. Full payment of the merchandise must be made within 5 days of the close of the auction. Note a Dallas County sales tax of 8.25% will be added on all customers shipping to or residing in Texas. Warranty: This item comes with a limited 14-day warranty. Item is guaranteed against DOA. We will not accept non-defective items unless item is seriously different from the one described in this auction. Items that damaged as a result ... moreof user error or are altered will void the warranty. Buyer must inform the seller within warranty period of any defects or problems. Shipping& Handling: Shipping& handing to be calculated and based upon your location. International buyers are welcome though I would request that you email me prior to purchasing. Some packages my require special handling. For local pick-ups. Items can be picked up in Irving, Texas during our normal business hours. All packages are shipped via UPS or USPS and will be shipped as soon as payment for the merchandise is received and confirmed. I will not ship the product on your account under any circumstances. Insurance and Returns: Insurance is the responsibility of the customer; JT Computer does not hold itself liable for shipping damage to merchandise. Insurance must be purchased and paid for at the time that shipping and handling payment is due. In accordance to the regulations set forth by the carrier. All items are considered property of the seller upon release for shipment. Warranty is valid upon customer receipt of item. We will not cover any items returned because of buyer's remorse, incorrect purchase, or items that are damaged/
Model PCE-P20 P10 Micromanipulator Micropositioner Probe Head magnetic base
Gently used. Fully functional P20/P10 XYZ micropositioners. General information: Travel: X. Y, Z axis =.500" precision tolerances from 6061-T6 Aluminum alloy- Resolution: 020” per turn- hard black anodize finish Normal 0 false false false EN-US X-NONE X-NONE
Racal 6103E GSM With Options 001,053,014,002,003, 04E Frequency STD
YOU ARE BIDDING ON A Racal 6103E GSM With Options 001.053,014,002,003, 04E Frequency STD* THIS ITEM WAS PULLED FROM A WORKING ENVIRONMENT AND IT IS IN GOOD COSMETIC CONDITION* INCLUDES FRESH CALIBRATION and 30-DAY WARRANTY* Please ask all questions before placing your bid* AUCTION TERMS( please read before placing your bid) International bidders. Please read Shipping& Handling section! Product Condition/ Warranty/Return· Most of our equipment is removed from a working environment. Unless specified. It is being sold as Used. As Is” Comes as pictured” No documentation. Software, or other collateral included. No return or exchange is acceptable. Actual images of item below. We are not responsible for Customs for items shipped overseas. Electronic Items labled"unit powers up" Should the unit fail to power up upon receipt. It ... moremay be sent back to us at the expense of the buyer to be tested by our staff. It will be at our discretion to issue a refund upon our findings. Payment: Money Order/Cashiers Checks. Bank to Bank Wire Transfer(for international bidders) PayPal( A Confirmed Address is required) PayPal accepts Visa. MasterCard, Discover, American Express, and eCheck. Failure to pay for your item within 5 days will result on cancellation of the transaction. Shipping and Handling: Item usually ships within 1-2 business days after the receipt of the payment. Shipping and Handling within United States: Unless specified. We charge a flat fee for each item being auctioned. We do not ship to P.O. Boxes or A.P.O. We use DHL and FedEx Ground Service. International bidders: please contact us with City. Postal Code and Country BEFORE BIDDING for S&H rate which could be expensive(the same applies to Hawaii and Alaska) We ship USPS once a week and only upon request. Unless specified from buyer. Insurance is not available. 8.25% tax added if ships to California. We reserve the right to end this auction at any time for any reason. Powered by The free listing tool. List your ite
HP 34507 34507A 34507B 34507C 32 Channel Mercury Wetted Relay Multiplexer
HP 32 Channel Mercury Wetted Relay Multiplexer Model: 34507 Note: the difference between the A.B and C version is only in the connector block, which is not available Item comes from a clean room tool and is in good. Working condition with 60 day warranty. Buyer responsible for shipping costs both ways. Please visit my store. We have similar items and will be happy to combine items to reduce shipping costs. I may also have multiple quantities so please write me if you need more of a particular item or have any other questions. Photos are representative of actual item* Thanks for looking and have a nice day!
HP 34502 34502A 34502B 34502C 32 Channel Reed Relay Mulitplexer 60 day warranty
HP 32 Channel Reed Relay Mulitplexer Model: 34502 Note: the difference between the A.B and C version is only in the connector block, which is not available Item comes from a clean room tool and is in good. Working condition with 60 day warranty. Buyer responsible for shipping costs both ways. Please visit my store. We have similar items and will be happy to combine items to reduce shipping costs. I may also have multiple quantities so please write me if you need more of a particular item or have any other questions. Photos are representative of actual item* Thanks for looking and have a nice day!
Integrated Circuit (IC) Separator Adjustable Kit Control Tub
Integrated Circuit Separator Adjustable Kit Control Tub with all separators These adjustable kit control tubs are used and in good condition. We offer combined shipping discounts if possible for multiple items. Please request an invoice prior to check out. Shipping by truck is estimated to be around $300.00. We will confirm actual shipping costs. PAYMENTS Payments through PayPal only. SHIPPING We offer combined shipping discounts if possible for multiple items. Please request an invoice. We ship items within 1 to 2 business days of receiving payment. Please make sure your PayPal address is accurate. We only ship the items to your PayPal address. Items are shipped USPS or UPS. Expedited shipping is available for an addition charge. No international buyers please. TERMS OF SALE All our items are guaranteed and in working condition. Unless specified ... moreotherwise. Our titles and description are as accurate as possible. If you have any questions before bidding. Please contact us. Defective items may be returned for a 100% refund of your purchase price including shipping costs. We must receive the item back for inspection prior to a refund being issued. Non-defective items may be returned within 14 days of receipt. Return shipping costs will be paid by the buyer. We are not responsible for the technical specifications or fitment of a part. Please check with the manufacturer if you need technical information about a part. Please ask all necessary questions prior to bidding. ABOUT US Electronic Parts 4 Sale. Inc. is a wholly owned subsidiary of AMI Contract Manufacturing Services with offices in Oklahoma and Florida. All parts for sale are from excess inventory and are new and have been well maintained in heated and air conditioned warehouses. All parts are sourced domestically. All parts are handled with Esd procedures. AMI specializes in turn-key manufacturing and labor only contracts for processes such as surface mount. Thru-hold, w ireing harness. Cable, electromechanical and RF board assembly. In addition we provid
Cyber Optics LSM
This Cyber Optics LSM allows you to easily take paste height and width measurements on various types of solder pads. This Cyber Optics LSM is used and in good condition. We offer combined shipping discounts if possible for multiple items. Please request an invoice prior to check out. Shipping by truck is estimated to be around $300.00. We will confirm actual shipping costs. PAYMENTS Payments through PayPal only. SHIPPING We offer combined shipping discounts if possible for multiple items. Please request an invoice. We ship items within 1 to 2 business days of receiving payment. Please make sure your PayPal address is accurate. We only ship the items to your PayPal address. Items are shipped USPS or UPS. Expedited shipping is available for an addition charge. No international buyers please. TERMS OF SALE All our items are guaranteed and in ... moreworking condition. Unless specified otherwise. Our titles and description are as accurate as possible. If you have any questions before bidding. Please contact us. Defective items may be returned for a 100% refund of your purchase price including shipping costs. We must receive the item back for inspection prior to a refund being issued. Non-defective items may be returned within 14 days of receipt. Return shipping costs will be paid by the buyer. We are not responsible for the technical specifications or fitment of a part. Please check with the manufacturer if you need technical information about a part. Please ask all necessary questions prior to bidding. ABOUT US Electronic Parts 4 Sale. Inc. is a wholly owned subsidiary of AMI Contract Manufacturing Services with offices in Oklahoma and Florida. All parts for sale are from excess inventory and are new and have been well maintained in heated and air conditioned warehouses. All parts are sourced domestically. All parts are handled with Esd procedures. AMI specializes in turn-key manufacturing and labor only contracts for processes such as surface mount. Thru-hold, w ireing harness. Cable, electromechanical and RF board ass
Micromanipulator x y z Mitutoyo micrometer head
Used Micromanipulator x y z Mitutoyo micrometer head. Good Working Condition. Sold as photo is. Thank you.
Rudolph S300 Robot Control Box with PRI ESC-204T-RUD and 60 day warranty
Rudolph Technologies. Inc. S300 Robot Control Box with PRI Automation Model:ESC-204T-RUD Item is refurbished with 60 day warranty. Buyer responsible for shipping costs both ways. Please visit my store. We have similar items and will be happy to combine items to reduce shipping costs. I may also have multiple quantities so please write me if you need more of a particular item or have any other questions. Thanks for looking and have a nice day!
research devices M8A Flip Chip Aligner Bonder "as is" w manual
View my Other Auctions EMAILS answered M-F 8-5 MST SHIPPING TERMS: We use UPS ground service for delivery in the lower 48 states. International customers We use USPS Priority for international delivery. International customers click here for shipping guidelines Shipping fees listed on all auctions via cost calculator for international and domestic. All packaged items include 2" of bubblewrap and/or foam if applicable. Freight Delivery: In Most cases. We will pelletize for free. Any crating would be subcontracted. We have forklift loading. We also have local pick up. For larger, heavier items customer is required to make arrangements. We can also get a freight quote for you. And/or ship on your account. If you have any questions about our freight shipment guidelines. Or to get a quote don't hesitate to contact us. Returns Policy: ... moreitems sold"as is" have no return. No warranty& no guarantee. AS IS items are not covered by return policy. These sales are final. Southwest Liquidators does not warranty the item in AS-IS auction/store in any way. No refunds. These statements maybe used as an evidence for PayPal dispute or chargeback. DOA means dead on arrival For items with a guarantee. no guarantee unless stated otherwise) items must be returned within 15 days Item must be in original shipped condition(not modified. Not missing parts) Contact us before returning any items Items that are returned more than 15 days after delivery will receive No refund. Buyer is responsible for return shipping charges if applicable. Shipping charges are directly quoted from the shipping company. Please consider these costs when intending to purchase an item. We sell mostly USED Industrial Equipment. Please email us with any questions or if the description is unclear to you. M8A bump bonder. Research devices flip chip aligner. Item is being sold"as is" for parts or repair. Looks like it may be all there. I am not sure how it is to be configured. There is a note in the manual that reads" lower camers do
HP 1230A LOGIC TRIGGER WITH MANUAL, CASE, CLIPS and HOOKUPS
Very nice HP 1230A. Hasn't been used in years but pristine in looks, case inside is nice. All the clips and wires are there.
AVAL Data PCS-24B-A Panel Computer 10.4 inch SVGA TFT-LCD w/touch panel D25
WELCOME View My Other Items For Sale This is a used Aval Data Corp PCS-24B-A Panel Computer 10.4" SVGA TFT-LCD with Touch Panel. It is good condition with a small scratch on the screen. It came from a working environment and was a working pull. It has cords in serial port-1. 2, and the AC Input. Serial-2 port is a Cat 5 adapter in it with Cat 5 cable. There are slots for VGA, Parallel, Keyboard, and 10Base-T cables not included. There are 2 keys that come with it. And on the right side are adjustment buttons for Bright, Sleep, Buzzer, and Touch. It measures 4-1/8"L) including the coil drive unit x 5-1/2"W) including the cover x 4-1/2"H) Please judge for yourself and consider the photographs very carefully to determine the state and condition before you make your purchase thank you! If it is not pictured. It is likely NOT ... moreincluded in the sale. Thank you! Feel free to ask questions before hand and we will do our best to help. PLEASE DO NOT MAKE YOUR PURCHASE UNTIL YOU'RE SURE THIS IS WHAT YOU WANT! THANK YOU! We require immediate payment for “Bu it Now” and 3 days from point auctions end. We ship using UPS or USPS for all Destinations in the USA and USPS only for International countries. NOTE: BEFORE YOU MAKE YOUR PURCHASE PLEASE KNOW OUR COMPANY POLICY IS WE DO NOT SHIP ON OTHER CUSTOMER'S ACCOUNTS WITH NO EXCEPTION. Buyer is responsible for all shipping and handling costs. Including any applicable insurance, taxes, tariffs or duties. Goods typically ship within a 24 hour period once payment is cleared however, sales from the weekend will typically ship on Monday. We strongly encourage buyers to do their own research before buying. Please. It is very IMPORTANT that you know exactly what you are buying before you commit to the purchase. Please judge for yourself and consider the photographs very carefully to determine the state and condition before you make your purchase thank you! If it is not pictured. It is likely NOT included in the sale. PLEASE email us and ask any questions before
SIGNATONE 4 POINT PROBING TEST STATION !!! Untested
SIGNATONE 4 POINT PROBING TEST STATION! Untested I am not familiar with how to use this system. This is being sold as is and untested. Only what is shown is included. Additional pictures are located at the bottom of the ad. We try our hardest to give 5-Star Service by giving Clear. Accurate and Honest descriptions to the best of our abilities. We also clearly state our return policies and shipping terms upfront so you know what to expect. If you are pleased with this transaction. Please respond with all 5 Stars! If you are not pleased for any reason, Please contact us using the Contact Seller link on the auction page, and we'll try and make it a Five Star Sale! Sales within the State of Colorado Will have State and local tax applied where applicable. We take care to pack your items professionally. Therefore items can take up to 7 days ... moreor more to ship after payment has cleared when we are backed up. Typically it is only a couple of days after but it does very through the seasons. If there is a critical need for immediate shipping(24 hours from time of payment, Monday through Friday) please let us know immediately after payment has been made. No C.O.Ds please.Payment due within 7 days of auction end. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13f65309ab7-0xe2-
THORLABS XYZ Micromanipulator w/ Mitutoyo Micrometers Micropositioner X Y Z
Up for auction is a THORLABS XYZ Micromanipulator/ Micropositioner with Mitutoyo Micrometers. We are not certain what model this. It came to us as part of a surplus lot and is in good physical condition with only a few minor dings and paint scratches. All axis adjustments work smoothly as they should. Please look closely at the photographs and feel free to contact us with any questions about the auction. Good Luck!
Agilent HP F240i (E2819A) Test Head 83K Logic System + 46084, 37204, E2807, C110
Template By Froo! Agilent HP F240i(E2819A) Test Head 83K Logic System + 46084. 37204, E2807, C110· WHAT IS IT? Th is listing is for(1) used Agilent HP F240i(E2819A) Test Head 83K Logic System with 46084. 37204, E2807, and C110 9000 CPU(mn: E3053A) Normal 0 false false false EN-US X-NONE X-NONE· DOES IT WORK? UNKNOWN(unit was purchased in a bulk of surplus equipment) We do not have the time. Equipment, or expertise to test it further. This means that it is being sold as-is. As-pictured with the assumption and understanding that additional calibration, parts or repairs may be required and should be expected. HOW’S IT LOOK? Fair. Some cosmetic scuffs or blemishes(see photos) CAN I RETURN IT? No. Returns will not be accepted for this item. Please as questions if needed and bid accordingly. Normal 0 false false false EN-US X-NONE X-NONE* ... morePlease read the terms below for more information on our store. Policies, and details specific to this listing. Join Our Tharitis Newsletter! About Us Welcome to our online surplus outlet of used test& measurement equipment. Where our goal is to offer you the best prices on overstocked lab and manufacturing products. Our inventory changes daily, so please visit our store often. We pride ourselves in customer satisfaction. So please don't hesitate to contact us directly with your questions or concerns. We can be contacted Monday- Friday, 8am- 5pm PST at(760)806-6600. WE BUY SURPLUS TEST EQUIPMENT- MESSAGE US FOR DETAILS* Payment Our ordering system is fully automated and powered by eBay and PayPal Secure Servers. If you purchase an item through our official store your payment is due immediately upon checkout. Item(s) are also available for sale through channels other than eBay and from time to time may be sold before the eBay auction ends. In which case we reserve the right to end the auction early. We will accept PayPal. Company Check, Personal Check, Bank Check or Major Credit Card. All funds must be in US Dollars and unsecured funds must clear prior to ship
INOVYS Model ZFP Oceleot Semiconductor Production Tester PCB / ATE Wafer Test
Template By Froo! INOVYS Model ZFP Oceleot Semiconductor Production Tester PCB/ ATE Wafer Test· WHAT IS IT? Th is listing is for(1) used INOVYS Model ZFP Oceleot Semiconductor Production Tester PCB/ ATE Wafer Test Instrument. Normal 0 false false false EN-US X-NONE X-NONE· DOES IT WORK? UNKNOWN(unit was purchased in a bulk of surplus equipment) We do not have the time. Equipment, or expertise to test it further. This means that it is being sold as-is. As-pictured with the assumption and understanding that additional calibration, parts or repairs may be required and should be expected. HOW’S IT LOOK? Fair. Some cosmetic scuffs or blemishes(see photos) CAN I RETURN IT? No. Returns will not be accepted for this item. Please as questions if needed and bid accordingly. Normal 0 false false false EN-US X-NONE X-NONE* Please read the terms ... morebelow for more information on our store. Policies, and details specific to this listing. Join Our Tharitis Newsletter! About Us Welcome to our online surplus outlet of used test& measurement equipment. Where our goal is to offer you the best prices on overstocked lab and manufacturing products. Our inventory changes daily, so please visit our store often. We pride ourselves in customer satisfaction. So please don't hesitate to contact us directly with your questions or concerns. We can be contacted Monday- Friday, 8am- 5pm PST at(760)806-6600. WE BUY SURPLUS TEST EQUIPMENT- MESSAGE US FOR DETAILS* Payment Our ordering system is fully automated and powered by eBay and PayPal Secure Servers. If you purchase an item through our official store your payment is due immediately upon checkout. Item(s) are also available for sale through channels other than eBay and from time to time may be sold before the eBay auction ends. In which case we reserve the right to end the auction early. We will accept PayPal. Company Check, Personal Check, Bank Check or Major Credit Card. All funds must be in US Dollars and unsecured funds must clear prior to shipment. We will accept wir
Terra Universal Dual Purge Desiccator System 1600
Ensures a constant positive pressure inside desiccators and other enclosures to block contamination and moisture inflow. Automatically activates high-flow purge when doors are opened to ensure fast. Effective purge of particles and moisture. Operates in tandem with NitroWatch® to maintain any desired sub-ambient moisture level(down to 0% RH) Guards against pressure damage to desiccator doors and seals. Door switches are highly reliable-rated for over 10 million operations. Cuts nitrogen waste, guards against oxidation.
MICROMANIPULATOR MICROPOSITIONER FOR PROBER c #210
RECEIVED AS SURPLUS Manufacturer: MODEL# THE TIP GOES UP AND DOWN-IT DOES NOT DO LEFT TO RIGHT-COEE-I ONLY HAVE WHAT IS PICTURED-IF YOU WOULD LIKE MORE PICTURES OR WOULD LIKE ME TO TRY SOMETHING ON THE UNIT PLEASE LET ME KNOW- SOLD AS IS
ARACOR Model 1000 Automatic Irradiation System
Snappy Auctions. ARACOR Model 1000 Automatic Irradiation System ARACOR Model 1000 Automatic Semiconductor Irradiation System These items were pulled in working condition from a business environment and have been tested to power on. Although no further tests could be done. Overall in great shape, see photos for details. We are selling this item AS-IS. Will warr anty on 7day DO A. Thanks for looking This item will nee d fr eight shipping. We can help with q uote. Let us know if you need help. Happy Bidding! Seller Information Payment Information PayPal and payment upon pickup unless otherwise noted. We are happy to accept credit card payments through PayPal. Payment is required within 5 days of the close of the auction. If you have extenuating circumstances on payment. You must email us immediately to notify us of the expected date of receipt ... moreof payment. Shipping Information We pride ourselves on the quality of items sold. We pack and ship our items professionally to ensure each item you buy from us arrives safely and in the listed condition. Our items are shipped via FedEx Ground Insured(USPS in some cases) Please check the shipping calculator in the body of this auction to obtain an accurate shipping cost associated with this item based on your zip code. If the listing does not include a shipping calculator. It will clearly state the flat rate amount or indicate it is for Local Pickup. All shipping prices include a standard handling fee that includes the cost of all packaging materials. Items are typically shipped within 3 business days of receipt of payment. You will be notified by email when your item has been shipped. SELLER CODE SAF2ALL We are unable to ship to PO boxes. So please provide a standard mailing address with your payment. If you pay by PayPal, and your shipping address is different than your confirmed address in PayPal, you must email us directly to let us know of the requested change. We will email you back to accept it, otherwise your item will be sent to your confirmed PayPal addre
TEMPTRONIC Thermostream TP04100A 1 Thermal Inducing System *30 DAY WARRANTY*
YOU ARE BIDDING ON A TEMPTRONIC ThermoStream TP04100A 1 Thermal Inducing System*30 DAY WARRANTY* THIS ITEM WAS PULLED FROM A WORKING ENVIRONMENT AND IT IS IN GREAT COSMETIC CONDITION* FREIGHT SHIPMENT ARRANGED WITH THE CUSTOMER*30-Day Warranty* Please ask all questions before placing your bid* AUCTION TERMS( please read before placing your bid) International bidders. Please read Shipping& Handling section! Product Condition/ Warranty/Return· Most of our equipment is removed from a working environment. Unless specified. It is being sold as Used. As Is” Comes as pictured” No documentation. Software, or other collateral included. No return or exchange is acceptable. Actual images of item below. We are not responsible for Customs for items shipped overseas. Electronic Items labled"unit powers up" Should the unit fail to power ... moreup upon receipt. It may be sent back to us at the expense of the buyer to be tested by our staff. It will be at our discretion to issue a refund upon our findings. Payment: Money Order/Cashiers Checks. Bank to Bank Wire Transfer(for international bidders) PayPal( A Confirmed Address is required) PayPal accepts Visa. MasterCard, Discover, American Express, and eCheck. Failure to pay for your item within 5 days will result on cancellation of the transaction. Shipping and Handling: Item usually ships within 1-2 business days after the receipt of the payment. Shipping and Handling within United States: Unless specified. We charge a flat fee for each item being auctioned. We do not ship to P.O. Boxes or A.P.O. We use DHL and FedEx Ground Service. International bidders: please contact us with City. Postal Code and Country BEFORE BIDDING for S&H rate which could be expensive(the same applies to Hawaii and Alaska) We ship USPS once a week and only upon request. Unless specified from buyer. Insurance is not available. 8.25% tax added if ships to California. We reserve the right to end this auction at any time for any reason. Powered by The free listin
GGB Industrial 28 pico probe with micropositioner
This is a set of RF probing tool including Micromanipulator 550 micropositioner.GGB industrial 28 pico probe arm with attenuator box, power supply.Probe tip.The customer has 14 days ROR. The working frequency range is from DC to 1 Ghz.Please see attached photos.
Unitek Micropull IV Wire Bond Pull Tester - FOR PARTS OR REPAIR
Item Sold AS-IS. No Warranty, No Returns- Unitek Micropull IV Wire Bond Pull Tester FOR PARTS OR REPAIR This item is non-operational. Or its operational condition cannot be determined. If you have any question regarding this unit please feel free to contact me and I will do my best to answer your questions. Please read the terms of sales below before you purchase or submit a Best Offer. Included is only what is mentioned. 1 unit as shown in picture. Picture represents the actual item. No other cables. Parts, power cords, power adapters, software or any other accessories included. ~11 Pounds in a box with packaging materials ============================================================================ Terms of Sale Payment Options PayPal only or contact us for payment methods to pay on pickup. Bank transfers or payments using a Cashier’s Check ... moremay be available. Contact us for additional information and fees. RETURNS NOTICE- This item is sold As-Is No Returns The sale of this item is final; we will not accept a return under any circumstances. Please examine the item closely. If you need additional information. Photos or would like for us to perform some basic tests to determine the condition please feel free to contact us prior to your purchase. SHIPPING Shipping within the United States Buyer is responsible for all shipping costs including returns. Please note for domestic shipments(within US) we ship FedEx ground only. But you can use UPS ground shipping rates(calculated automatically by eBay) to estimate the shipping charges. Actual FedEx ground rates may be cheaper then UPS depending on the destination, so for heavy packages you can always contact us to get the exact shipping rate. FedEx does not ship to PO Boxes- please provide us with a regular address prior to completing the transaction. International Shipments Please allow 2-3 business days to process international shipments. All International shipments are shipped by USPS Priority Mail International. USPS Express Mail International may be available t
GGB Industrial 40A probe tip
GGB industrial 40A probe tip was marked with 40A-GS-250-DP and 40A-SG-250-DP.There are two pieces inside of box.The frequency range is from DC to 40Ghz.Please see attached photos. f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13f7deed12c-0xf3-
Midas De-Lidder DL-3 Lid Remover (Reduced 8/12)
Midas De-Lidder DL-3 Lid Remover The Midas De-Lidder DL-3 Machine Removes Lids from Hermetic Packages for Rework. Quality Control and Failure Analysis Features& Specifications: Removes Lids from Hermetic Packages for Rework. Quality Control and Failure Analysis Tungsten Carbide Tools Mill Smoothly and Quietly Through the Welded Outside Edge of the Lid Flange. Freeing the Lid and Leaving a Reseal-Ready Package Surface Protects Packages from Particles. Vibration, and Dimensional Changes Dimensions: 20" x 24" x 9" Actual Net Weight: 119 LBS Tested Good With Guarantee All Items are Sold with a 14 Day Unconditional Right of Return and Guarantee(2 Full Weeks from Date of Receipt) All Sales are FOB Ocean N.J. All Items are Expertly Packed. Buyer is Responsible for Shipping in the Event of a Return. Tech-Systems will Pay Return ... moreShipping in the Event of an RMA(Repair) Please Visit our always changing eBay Store. To view our Complete 20.000 item Inventory visit us@ www.Tech-Systems.net Be sure to add me to your favorites list! Check out my other items! Listed By Rush C.
WINCHESTER Electronic HS27500-495 CONN PCA with QLogic GIGBIT NIC
qty: 01) W inchester E lectronics model# WE HS27500-495 CONN PCA. The board comes with QLogic Gigabit NIC installed(shown with photo) The PCA is pulled from current working environment. Due to nature of unavailable hardware. This component can not be tested. What you see is what you would received- Welcome to CSI.USA WARRANTY All of our items sold in working condition have a minimum 14 day warranty. Unless otherwise stated in the listing. Please refer to the item you are purchasing, some have exchange only and some are sold for“ parts only” and some have no warranty at all. SHIPPING We will use most all shipping methods. And will refund the shipping difference if it is calculated to high on ebay. Not all shipping options are shown available when purchasing an item on ebay. However, if you send us an email we will change it, and if possible ... moremake arrangements for the item to be shipped your preferred way. EXPEDITED SHIPPING IS AVAILABLE Please allow 1-2 additional business days for packaging large items. Or items that need to be sent freight. Please note: For orders placed before 3:00 p.m. CA we will try to ship the same day depending on overall order volumes; orders placed after 3:00 a.m. will be shipped the next business day. Orders placed after 3:00 a.m. CA on Friday will not be shipped out until the following Monday. Most all items may be expedited and we will let you know the addition fee. FedEx and UPS labels may be prepaid by you. And emailed with approval. PAYMENTS We Gladly Accept Payments via PayPal. We also accept Wire Transfers and Cashiers Checks. Checks must clear prior to item being shipped. P/O are accepted and our company invoices available(fax) 408-778-9420, We do have a company website where items maybe purchased as well. Sales Tax: We are required by law to collect 7.25% sales tax in California and 8.25% Santa Clara County RETURNS We want to make sure you're 100% satisfied with your purchase! If. By chance, a product needs to be returned to us it must b
Hewlett Packard 10579-60004 Resolution X36
Hewlett Packard 10579-60004 Resolution X36 Hewlett Packard 10579-60004 Resolution X36 Resolution Extender for Hewlett Packard 5526A Laser Measurement System Condition: Used/Pull Warranty: 14-Day Right-of-Return SKU: 383029 Please review our Help page for all of our Terms and Conditions before bidding or purchasing. By bidding or purchasing our merchandise. You are agreeing to these terms and conditions. Questions? Send us a message SALE TERMS AND CONDITIONS: Only the pictured items are included in the listing. If it is not pictured or mentioned in the description it is not included. Place a bid only if you intend to purchase the item. If payment is not received within 3 days. The item(s) will be relisted at our discretion. PAYMENT INFORMATION: Payments are expected in a timely manner. Please contact us in the event that payment cannot be ... moremade within three days. Payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) A 8.75% Sales tax applies to CALIFORNIA residents unless a resale tax ID is provided for our records. We cannot process the order until we receive sales tax or a copy of your tax ID. If you would like to pay using a credit card. Please call us at(408) 743-5609. Resellers Click Here* WARRANTY: Please see listing above for the warranty that applies to this item. AS-IS. No Warranty: When an item is stated as being AS-IS. The condition of the item is either unknown or has known issues(as stated in the description) and does NOT carry any warranty and NO returns will be accepted for this item. 14-Day Right-of-Return: You have fourteen(14) days to contact us for a replacement or refund. We can not warranty compatibility with your equipment. Or warranty items that have been installed in your computer and/or altered once they have left our warehouse. We maintain the right to use our descretion when choosing between a replacement or refund. 30-day Warranty: When an item carries a 30-day warranty. You have 30-days
Applied Materials 0190-22204 REV 001 Yamatake LOG-1110 with 60 day warranty
Applied Materials Model: 0190-22204 REV 001 Yamatake Sensing Control LOG-1110 Item comes from a clean room tool and is in good. Working condition with 60 day warranty. Buyer responsible for shipping costs both ways. Please visit my store. We have similar items and will be happy to combine items to reduce shipping costs. I may also have multiple quantities so please write me if you need more of a particular item or have any other questions. Thanks for looking and have a nice day!
Applied Materials 0190-25312 REV 001 Yamatake LOG-1212 REV 001 + 60 day warranty
Applied Materials Model: 0190-25312 REV 001 Yamatake Sensing Control LOG-1212 REV 001 Item comes from a clean room tool and is in good. Working condition with 60 day warranty. Buyer responsible for shipping costs both ways. Please visit my store. We have similar items and will be happy to combine items to reduce shipping costs. I may also have multiple quantities so please write me if you need more of a particular item or have any other questions. Thanks for looking and have a nice day!
JEL Corporation C4430-00501 DC24V 0.1A Controller with 60 day warranty
JEL Corporation DC24V 0.1A Controller Model: C4430-00501*DC24V 12A Robot Model GHR4206-320-PM-03189 available in separate listing* Item comes from a clean room tool and is in good. Working condition with 60 day warranty. Buyer responsible for shipping costs both ways. Please visit my store. We have similar items and will be happy to combine items to reduce shipping costs. I may also have multiple quantities so please write me if you need more of a particular item or have any other questions. Thanks for looking and have a nice day!
ESEC 3018 AWB Wire Bonder Automated Gold Ball Bonder Type W-131
ESEC 3018 wire bonder. Automated gold ball bonder. Type W-131. ESEC 3018 AWB Automated Gold Ball Bonder. Flying bondhead operates by means of a frictionless air bearing. System has programmable focus option. E-Stop and Venturi vacuum. 2 in. x 2-1/2 in. work table travel. Programmable X-Y-Z indexer. Buyer is responsible for shipping Condition: Good Shipping: E-mail any questions about freight shipping prices. We can build custom pallets and crates for an extra charge. International shipping is available on most items please ask before bidding. Returns: All items are sold as-is unless otherwise stated. Returns are not accepted unless item is defective or grossly misrepresented. Notify us of any issue within 7 days of receiving product. Feedback: Feedback is very important and we want happy customers. Please email or contact me with any concerns. ... moreIssues or problems before leaving feedback and give me that opportunity to work things out if needed. Communication is key. We strive to provide a good product at a good price with fast shipping and great customer service. We realize that mistakes happen every now and then so please talk to us and we will make it right. Please checkout our other products at our ebay store. New items are added daily. Powered by The free listing tool. List your items fast and easy and manage your active items.
Shinpo Electronics Co. CSU-Basic with 60 day warranty
Shinpo Electronics Co. Model: CSU-Basic Item comes from a clean room tool and is in good. Working condition with 60 day warranty. Buyer responsible for shipping costs both ways. Please visit my store. We have similar items and will be happy to combine items to reduce shipping costs. I may also have multiple quantities so please write me if you need more of a particular item or have any other questions. Photos are representative of actual item* Thanks for looking and have a nice day!
Shinpo Electronics Co. DMP-FU-PPS-40A-TYPE3 with 60 day warranty
Shinpo Electronics Co. Model: DMP-FU-PPS-40A-TYPE3*CSU-Basic available and sold separately* Item comes from a clean room tool and is in good. Working condition with 60 day warranty. Buyer responsible for shipping costs both ways. Please visit my store. We have similar items and will be happy to combine items to reduce shipping costs. I may also have multiple quantities so please write me if you need more of a particular item or have any other questions. Photos are representative of actual item* Thanks for looking and have a nice day!
Hewlett-Packard HP 5061-6140 Probe Cable For Modular Miniprobes
Hewlett-Packard HP 5061-6140 Probe Cable For Modular Miniprobes Hewlett-Packard HP 5061-6140 Probe Cable For Modular Miniprobes Used in 10433A/ 10436A/ 10437A/ 10439A/ 10440A/ 10441A Condition: Used Warranty: 14-Day Right-of-Return SKU: 387895 Please review our Help page for all of our Terms and Conditions before bidding or purchasing. By bidding or purchasing our merchandise. You are agreeing to these terms and conditions. Questions? Send us a message SALE TERMS AND CONDITIONS: Only the pictured items are included in the listing. If it is not pictured or mentioned in the description it is not included. Place a bid only if you intend to purchase the item. If payment is not received within 3 days. The item(s) will be relisted at our discretion. PAYMENT INFORMATION: Payments are expected in a timely manner. Please contact us in the event that ... morepayment cannot be made within three days. Payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) A 8.75% Sales tax applies to CALIFORNIA residents unless a resale tax ID is provided for our records. We cannot process the order until we receive sales tax or a copy of your tax ID. If you would like to pay using a credit card. Please call us at(408) 743-5609. Resellers Click Here* WARRANTY: Please see listing above for the warranty that applies to this item. AS-IS. No Warranty: When an item is stated as being AS-IS. The condition of the item is either unknown or has known issues(as stated in the description) and does NOT carry any warranty and NO returns will be accepted for this item. 14-Day Right-of-Return: You have fourteen(14) days to contact us for a replacement or refund. We can not warranty compatibility with your equipment. Or warranty items that have been installed in your computer and/or altered once they have left our warehouse. We maintain the right to use our descretion when choosing between a replacement or refund. 30-day Warranty: When an item carries a 30-day
HP Agilent E1416A 75000 Series C Power Meter with 60 day warranty
HP Agilent 75000 Series C Power Meter Model: E1416A Item comes from a clean room tool and is in good. Working condition with 60 day warranty. Buyer responsible for shipping costs both ways. Please visit my store. We have similar items and will be happy to combine items to reduce shipping costs. I may also have multiple quantities so please write me if you need more of a particular item or have any other questions. Thanks for looking and have a nice day!
Agilent HP 6651A Power Supply with 60 day warranty
Agilent HP Power Supply Model: 6651A Item comes from a clean room tool and is in good. Working condition with 60 day warranty. Buyer responsible for shipping costs both ways. Please visit my store. We have similar items and will be happy to combine items to reduce shipping costs. I may also have multiple quantities so please write me if you need more of a particular item or have any other questions. Thanks for looking and have a nice day!
Ortec 9308 Picosecond Time Analyzer includes cable with 60 day warranty
Ortec Picosecond Time Analyzer Model: 9308 includes cable Item comes from a clean room tool and is in good. Working condition with 60 day warranty. Buyer responsible for shipping costs both ways. Please visit my store. We have similar items and will be happy to combine items to reduce shipping costs. I may also have multiple quantities so please write me if you need more of a particular item or have any other questions. Thanks for looking and have a nice day!
Miyachi Unitek Uniflow Pulse Thermode Control Soldering System UNFA 2/120
Miyachi Unitek Uniflow Pulse Thermode Control Soldering System UNFA 2/120 Used in good condition. Minor blemishes in isolated areas. Still. Nice and clean. You can see the screen changes and cycles through various menus when keypad buttons are pushed. One screen warns that"emergency jumper not installed" and another warns"no thermocouple is attached. Take a look at all the images. Includes: UNFA 2/120 power supply-50F/ LRF Welder head. Foot pedal. All cables shown in photos. Comes only with what you see in pictures. I really don't know what accessories might be missing to make this a complete unit. I've tried to take the best photographs I can so buyers more experienced than myself. Can look at the images and decide the condition and what is required to make this fully functional. Knowing this. It is being sold as As-is, ... morereturns not accepted. WE HAVE MORE WIRE BONDERS AND SEMICONDUCTOR items on eBay this week:
Rucker-Kolls 222 Micromanipulator XYZ Probe Micropositioner w/Magnetic Base #2
Search our eBay Store! Rucker-Kolls 222 Micromanipulator XYZ Probe Micropositioner w/Magnetic Base#2 SKU: JV-ZOR-B-KOLLMICROMANI Condition: For parts or not working Packaging: OEM Warranty: AS-IS FOR PARTS OR REPAIR This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge New Page 1 Rucker-Kolls 222 Tri-Axial Micromanipulator XYZ Probe Micropositioner with Magnetic Base FOR PARTS OR REPAIR Model: 222. X Travel Distance: 5/8” Y Travel Distance: 5/8” Z Travel Distance: 5/8” PLEASE NOTE: The Z axis(the vertical adjustment slide) is NOT responsive and moves loosely in both directions. Physical Condition: Good/Fair- Minor scuffs/scratches on the unit’s body. Adjustment ... moreknobs are in good physical condition. Functionality/Degree of Testing: Adjustment knobs move the rails in both directions smoothly. The Z-Axis rail knob is not responsive and the rail moves loosely in both directions. We do not have the necessary resources to further test this unit. Probe head is not included. UNIT IS BEING SOLD FOR PARTS OR REPAIR. Dimensions(L" W" H" 2 ¾ x 2 1/8 x 2 1/8 PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more informa
ML523 - Xilinx Virtex5 RocketIO GTP Characterization Board
ML523- Xilinx Virtex5 RocketIO GTP Characterization Board Virtex-5 FPGA(referred to as the device under test. Or DUT, in the user guide) Onboard power supplies for all necessary voltages, Power supply jacks for optional use of external power supplies, JTAG configuration port for use with Parallel Cable III and Parallel Cable IV cables, System ACE™ controller with 8-bit MPU port support, RS-232 serial port, Power supply module supporting all transceiver power requirements, Two 2.5V/ 3.3V global clock oscillator sockets, Two single-ended global clock inputs with SMA connectors, Two pairs of differential global clock inputs with SMA connectors, SuperClock module supporting multiple frequencies, Xilinx Generic Interface(XGI) 16 to 48 pairs of SMA connectors for the RocketIO transceivers, 4 to 12 pairs of SMA connectors for RocketIO transceiver ... moreclock inputs, Power indicator LEDs, General purpose DIP switches. LEDs, and pushbutton switches, Payment- Shipping- Returns Payment is due within 2 days of sale/auction ending I prefer PayPal as method of payment Handling Time; I ship within 1 day of receiving cleared payment except weekends and holidays USA/Domestic Shipping; Priority Mail. Fed Ex or UPS which International Shipping; Calculated cost which varies by buyers' location. I ship via eBay's Global Shipping Program Return Policy; Item must be received within 14 days in order to be refunded. In original condition/the way you received it. With original packaging. Buyer is responsible for necessary return shipping costs in a timely manner
Fusion PWB 344281 Rev B System Interface-Ver II W/ISO SECS-II
Warranty All items are sold with a 30 day warranty as follows: Items damaged in shipment. Non-functional upon arrival, or incorrectly listed-Buyer will receive a full refund of all cost, including return shipping. Where multiple items are in inventory, Seller will offer to replace the item at buyer's option. The Seller will advise regarding method of return shipping. Items purchased incorrectly by Buyer. Seller will process a refund for the item. Less Seller's orginal cost of shipment, upon receipt of the item in undamaged, unused, and un-opened sealed bag condition. Please note: Some items have greater value because they are either new, or refurbished, and are still sealed with the original certification from the manufacturer or the refurbisher. In the event that a sealed package is opened, the refund will be discounted to reflect ... morethis loss of chain-of-custody. All return shipping will be at the Buyer's cost. As you see from our feedback. We take pride in maintaining a very positive relationship with our buyers. Please contact us immediately if there is an issue with your purchase. We will normally respond within 24 hours to any inquiry, so if you don't get a response, email again! We want your repeat business, and will do our very best to accommodate your needs. We have a strong professional mechanical and process engineering capability in our business and can answer technical questions quickly. Shipping Shipping Terms: Method of domestic shipping is at seller's option. International shipping will be at buyer's cost as listed. We know that time is money in your business. So we ship either same or next business day after your order is paid for, depending on when it is received. Where multiple purchases are made, combined shipments will be made, and refunds will be issued via PayPal for overpayment if appropriate. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please
CTI Cryo Pump On board CF 8 Rebuilt
Manufacturer: CTI Cryogenics Model: On Board 8F Serial S/N PF9846870; P/N 8116097G001
Dage Dage-DS100KG-CAL Calibration Set for the 2400PC Load Shear Tester
You are bidding on one Dage Dage-DS100KG-CAL Calibration Set for the 2400PC Load Shear Tester.
Granville-Phillips 307 Vaccum Gauge Controller w/PS
Granville-Phillips 307 Vaccum Gauge Controller w/PS ITEM DESCRIPTION: Used. Powers on. This unit is missing the Degas fuse and fuse cap. Selling as-is. ACCESSORIES: None. No manual. Cables, or any other accessories. My Policies: PAYMENT OPTIONS: At this time I only accept Paypal as payment for ebay items. TAX: New Mexico residents pay 6.9375% Gross Receipts Tax SHIPPING& HANDLING SHIPPING TERMS: The buyer is to pay all shipping charges. Most items will be listed with the ebay shipping calculator so that you can calculate your shipping cost prior to bidding. PLEASE NOTE: You will be charged the USPS. FEDEX or UPS retail shipping rate as given by the ebay shipping calculator. These are the actual rates as computed by the calculator based on the weight and dimensions of the package and the distance it is to be shipped. IMPORTANT NOTE: In ... moreorder to provide faster shipping service I am currently phasing my shipping operation to a shipping contractor. The contractor mainly uses FEDEX for ground shipments but I have not been able to change the type of shipment in all of my ads. If you choose UPS as a shipping option. Your item may be shipped FEDEX ground instead of UPS. FIXED SHIPPING RATE- CONTINENTAL UNITED STATES ONLY! If a fixed shipping rate is stated in the ad. It applies to shipment within the Continental United States only. Alaska, Hawaii and International will need to contact me for shipping rates. INTERNATIONAL SHIPMENT CUSTOMS DECLARATION: International customs fees and customs brokerage fees(if applicable) will be charged to the buyer. The customs declaration form will be filled out truthfully with the actual bid amount given as the value of the package. I will not mark items as gifts or claim a value less than what has been paid for the item. You may be interested in on eBay. Powered by
Inficon XTM Thin Film Deposition Controller / Thickness Monitor
Inficon XTM Thin Film Deposition Controller/ Thickness Monitor Used. As shown in the photographs. Powers on, responds to front panel buttons, no further testing done. All pictures contained in this auction are of the actual item up for auction. Click on the pictures to enlarge them to full size. Contact information: Our contact information will be provided to the high bidder upon auction completion including our address and phone number. If you are having email problems. It is possible that our email is being stopped by your spam filter. Make sure you check your ebay registered email. Our software, Ebay's Blackthorne Pro uses your ebay registered email address for communication not Ebay messaging. If you cannot locate the email from us, use ebays"Find Contact Information" on the Advanced Search page to get our phone number so ... moreyou can call us to let us know you are having a problem receiving email. We are available Monday, Wednesday and Friday for phone calls. This is an internet based business, so the majority of our communication will be done through email and ebay messaging. Payment: We accept payment through PayPal from US and Canadian account holders with a confirmed PayPal address. We do not accept international PayPal so do not ask and do not assume that we will. Again PayPal payments must have a confirmed address. We will only ship to your confirmed PayPal address. Again. We do not accept international PayPal All California residents will be charged 8.75% sales tax. Payment must be received within 7 days of the time you receive you total including shipping. Shipping: We ship within the United States and Canada only. We do not ship to PO boxes including APO/FPO. Upon request. And with the understanding that we do not take international PayPal and only ship internationally using FedEx International, we will accept international bids. Like all bidders. International bidders are responsible for all shipping costs. If the shipping cost is not give because the item is a large freight item. Or requi
Dage Dage-WH3 Precision Stage for the BT22 Load Shear Tester
You are bidding on one Dage Dage-WH3 Precision Stage for the BT22 Load Shear Tester. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-13fa5a476b4-0xfd-
Dage Dage-AP008-A Vacuum Stage with Accy for the 2400PC Load Shear Tester
You are bidding on one Dage Dage-AP008-A Vacuum Stage with Accy for the 2400PC Load Shear Tester.
Dage Dage-2400PC-TP100 Tweezer Pull 100 g Set for the 2400PC Load Shear Tester
You are bidding on one Dage Dage-2400PC-TP100 Tweezer Pull 100 g Set for the 2400PC Load Shear Tester. f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13fa5a47517-0x105-
Heidenhain AK LIP 48A Encoder,331 665-01,KNS P/n:08001-1141-000-02,Germany
92228B1 Heidenhain AK LIP 48A Encoder.331 665-01,KNS P/n:08001-1141-000-02,Germany Made in Germany Item Description Model: Heidenhain AK LIP 48A. IdNr: 331 665-01, Snr: 8 395 459 W6, KNS P/N: 08001-1141-000-02 X Encoder to(14037) 147 Size(Est) Sensor Cable length ~ 0.5m. Connector Cable length~150cm. Used. Good physical condition. Connectors Ok. minor dirt marks on cable and Body. Unit taken from working KNS 8028 Wire bonder. Working condition. This unit is given 14 days DOA if it does not perform as standard or what we described. We assume buyer will know how to operate or it functionity prior bidding. Not Include the problems or issue we have listed here. Return Not accepted for this item except if unit is physically not at what we described or wrong item send. We assume buyer will know how to operate or it functionity prior bidding. No ... morephysical damage and clean(Actual unit shown in photo) We did not perform full functional check. AS-IT condition. The observation is to help buyer to made best judgement prior bidding. No other parts or accessories except listed in the listing. Return Policy 14 Days DOA. will refund purchase price minus freight cost(upon returning to us) if item does not perform as it standard function or not as what we described here. For Free shipping. A standard Freight cost will be deducted from selling price. Buyer Pay Return Freight if item send back for refund. All issue MUST feedback to us within the DOA period. otherwise. It will consider accepted. For Free Shipment item. A freight charge of USD 20/= will be deducted if item is return for refund. GST GST Apply for local delivery in singapore. Oversea delivery exempted. Freight Standard Freight by Registered Post Service. Transit detail: 5 to 7 working days for Asia. 10 to 15 working days for US, EU. Tax not included. Freight to Singapore Locally: S$ 15/=(USD 12/=) for posting to Singapore. Tracking ID will be update in Ebay. Any Questions. Please email us. Please ask prior making offer. Zone A Zone B Zone C Zone D Zone E Zon
MICROMANIPULATOR MICROSCOPE LIFT W/ BAUCH & LOMB MICROZOOM
MICROMANIPULATOR BASE W/ BAUSCH& LOMB MICROZOOM INCLUDES: Bausch& Lomb MicroZoom Microprobing Microscope with Camera Port* 4 Place Nosepiece* Continuously Variable Rheostat Transformer(Not shown in pictures) Microscope Translation Controls Note: Sold as is. I am unable to test. Please ask if you need additional accessories such as Eyepieces, objectives etc. Sold as is nvd
Guzik S312 Air Bearing Technology Spindle for Tabletop Spinstand System
Guzik S312 I*think* this is an"Air Bearing Spindle for Tabletop Spinstand System" But I'm not sure. I have no idea if this works or not. The markings(as shown in pictures) indicate that it likely does not work. I have no way to test it. But I do have a lot of test equipment(and I'm an electrical engineer) so if there is anything you'd like me to check before you buy, just ask. Sold as-is at cost specified. Or best reasonable offer. I really don't know the value, so just be honest with me, and let's cut a deal.
HP Agilent E4805B 75000 Series C Central Clock 2.67 GHz with 60 day warranty
HP Agilent 75000 Series C Central Clock 2.67 GHz Model: E4805B Item comes from a clean room tool and is in good. Working condition with 60 day warranty. Buyer responsible for shipping costs both ways. Please visit my store. We have similar items and will be happy to combine items to reduce shipping costs. I may also have multiple quantities so please write me if you need more of a particular item or have any other questions. Photos are representative of actual item* Thanks for looking and have a nice day!
Tektronix TLA7D1 2 Channel DSO Module with DRT Acquisition with 60 day warranty
Tektronix 2 Channel DSO Module with DRT Acquisition Model: TLA7D1 Item comes from a clean room tool and is in good. Working condition with 60 day warranty. Buyer responsible for shipping costs both ways. Please visit my store. We have similar items and will be happy to combine items to reduce shipping costs. I may also have multiple quantities so please write me if you need more of a particular item or have any other questions. Thanks for looking and have a nice day!