Nose Assy Air Hydraulic Rivet Gun Nose Assembly Pneumatic Alligator Rivet Pulling Head Air Hydraulic Rivet Huck 353 Air Hydraulic Riveter Rivet Gun Rivet Cherrymax Bucking Bar Aircraft Piece Rivet Rivet Squeeze Emhart Pneumatic Rivet Puller Pneumatic Pop Rivet Gun 4X Rivet Gun Offset Rivet Air Pop Rivet Chicago Pneumatic Rivet Gun Ati Snap 1 8 Rivet Hydraulic Rivet Gun Blind Rivet Rivet Set 401 Shank Fsi D-100 Pneumatic Rivet Squeezer Textron Cherrymax Rivet Gun Nose Chicago Pneumatic Alligator Offset Rivet Set Compression Rivet Jiffy Uat Pneumatic Pop Rivet Emhart Pop Huck 352 3X Rivet Gun Rivet Gun Model Industrial Rivet Pneumatic Squeezer Huck 99 Rivet Fastener Rivet Gun Set Cherry Textron Avdel Cherry Max Squeezer Aircraft 8 Rivet Set Flush Rivet Set Ati Snap-On Rivet Set 1 Rivet Hammer Cherry Pneumatic Hydraulic Rivet Ati Snap On Tools Bucking Bar 3 16 Rivet 1 4 Rivet Aircraft Tools Snap 3 16 Rivet Set Pneumatic Compression Rivet Pneumatic Hydraulic Rivet Alligator Rivet Cherry Rivet Rivet Gun Air Hammer 401 Shank 5 32 Rivet Set Yoke Rivet Blind Rivet Gun Cherry Riveter Rivet Machine Sheet Metal Rivet Rivet Gun Aircraft Tools Pneumatic Rivet Hammer Riveter Machine Rivet Gun Kit Huck Rivet Gun Aircraft Tools Chicago Pneumatic Aircraft Rivet Sets Aircraft Tools Cleco Pop Rivet Gun Huck Nose Piece Rivet Set Lockbolt Nose Assy Cherrymax Pneumatic Aircraft Tools 2 Hand Rivet Chicago Pneumatic Rivet Aircraft Tools Ingersoll Rand Pulling Head Gage Bilt Pneumatic Blind Heavy Duty Rivet Aircraft Tools 5 16 Nose Rivet Model Cherry Rivet Gun Cherrylock Blind Fastener Tungsten Bucking Bar Cherrymax Huck Pneumatic Aircraft Rivet Huck 200 Aircraft Tools 7 2X Rivet Gun Olympic Allfast Aircraft Tools Atlas Copco Dayton Pneumatic Aircraft Tools Aro Aircraft Tools Jiffy Rivet Nut Rivnut Tool Chicago Pneumatic 4X Rivet Gun Pneumatic Air Rivet Gun Rivet Squeezer Aircraft Tools Apt Pop Rivetool Aircraft Tools Dotco Pop Rivet Pneumatic Hydraulic Rivet Gun Tools Ingersoll Rand Avc Tools Bucking Bar Huck Rivet Rivet Puller Gun Aircraft Tools 10 Huck Gun Roller Ratchet Aircraft Aviation Tools Aircraft Tools 8 Aircraft Sheet Metal Tools Riveting Machine Pneumatic Air Rivet Cp-214 Rivet Pneumatic Rivet Puller Cp 351 Rivet Set 498 Shank 1 4 Nose Huck 2025 Roller Ratchet Aircraft Tools Aircraft Tools Sioux Rivet Pulling Head Nose Cherry Max Rivet Cleco Runner Chicago Pneumatic Cp Hi Shear Nose Piece Aircraft Hydraulic Blind Rivet 3 16 Air Head Aircraft Pneudraulic Rivet Cherry G784 Aircraft Tools 4 Offset Rivet Pulling Head Nose Piece Aircraft Tools 3 Fsi Chicago Pneumatic Cp214 Rivet Shaver Alligator Squeezer American Pneumatic Jiffy Uat 5 Tools Huck Countersink Cages Cupped Rivet Set Aircraft Tools Rockwell Pneumatic Lockbolt Fastener Installation Textron Aerospace Aircraft Rivet Gun Straight Pulling Head 9 32 Nut Runner Collar Runner Prg 510 Fsi Pt-100 Hydraulic Pop Rivet Aircraft Tools 4 Pc Rivet Bucking Bar Aircraft Tools 1 Ati Snap On Tools 3 United Air Tools Air Rivet Gun Prg 510 Pneumatic Right Angle Pulling Head Electric Rivet Gp Lockbolt Rivet Gun Aircraft Rivit Gun Cherrylock Rivet Rivet Set Air Riveter Huck 200 Rivet Tools 5 32 Jiffy Air Tools Emhart Teknologies Angle Rivet Hi Lok Collar Bucking Bar Set Avc 13 Hi Lok 1X Rivet Cherry Textron Aerospace
 In 
 
Order by: 
Available to: 
Price: 
 - 
$
160.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
Tatco Hand Rivet Squeezer- Top Quality Made from drop forged stainless steel. Tool has a long handle design that provides plenty of leverage. Includes ... morean easily adjustable set holder and excepts.187" rivet squeezer sets. Heavy Duty Hand Rivet Squeezer Accepts.187 shank rivet sets Stainless Steel handle and yoke 1 1/2" reach Adjustable set holder-like new condition.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1457ffe901d-0x10f-
$
390
Buy It Now
$20 Shipping
Condition: Used
Location: Port Orange,FL,USA
$
5.5
Buy It Now
$3.98 Shipping
Condition: New – Open box
Location: San Antonio,USA
$
31.5
Buy It Now
$8 Shipping
Condition: Used
Location: Kent,WA,USA
$
89.2
Buy It Now
$0 Shipping
Condition: New
Location: Huntington Beach,CA,USA
$
25.5
Buy It Now
$0 Shipping
Condition: New
Location: Citrus Heights,CA,USA
$
180
Buy It Now
$9.5 Shipping
Condition: New
Location: Los Angeles,CA,USA
$
175
Buy It Now
$0 Shipping
Condition: Seller refurbished
Location: USA
Up for auction is a Ingersoll Rand AVC 12. 3X rivet gun. Accepts.401 sets. Has a regulator in handle. Works well! Does have previous owners engravings. ... moreI do combine shipping. Buyers using the International Shipping Program are eligible for combined shipping. I ship via USPS flat rate and everyone gets a tracking number upload automatically! I can accept you credit card payment over a short phone call where I get your info and you get a receipt sent to your email or phone via a text! Please check out my other items for sale! If you need more than 1 let me know I have SEVERAL rivet guns to sell!
$
800
1d 11h 14m 23s
0 bids
$200 Shipping
Condition: New – Open box
Location: Rochester,NH,USA
$
120
Buy It Now
$8.98 Shipping
Condition: New
Location: San Antonio,USA
Tungsten Bucking Bar- New- 1lb 4.5 oz- Very high quality American Made tungsten. Radius area on top makes it very comfortable in hand- Cobalt free- Edges ... moreare soft and smooth* If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. Combined Shipping- If purchasing several different items I will combine shipping. 1. Please use the"Add To Cart" feature. 2. When done shopping press the"Request total from seller" button. Located above the first item in your cart. 3. I will then send you an invoice with the appropriate shipping amount.
$
395
Buy It Now
$0 Shipping
Condition: Seller refurbished
Location: Crestview,FL,USA
$
49.95
Buy It Now
$5.49 Shipping
Condition: New
Location: San Antonio,USA
$
85
6d 20h 13m 22s
0 bids
$125 Now
$20 Shipping
Condition: Used
Location: San Diego,CA,USA
$
19.99
Buy It Now
Free Shipping
Condition: Used
Location: Sacramento,CA,USA
$
26.25
Buy It Now
$8.89 Shipping
Condition: New
Location: San Antonio,USA
$
69
Buy It Now
$0 Shipping
Condition: Used
Location: Crestview,FL,USA
16 piece.250" shank heavy duty rivet squeezer sets. Sizes include 1/8" 5/32" 3/16" and flush in various lengths. All cuppings are ... more470 universal head in good condition. A couple of the sets have been clearance ground but does not affect cupping. We ship APO. FPO, International and combine shipping. Check out my other items! Sign up for my email newsletters by adding my eBay Store to your Favorites
$
325
Buy It Now
$0 Shipping
Condition: New
Location: Locust Grove,GA,USA
SIOUX TOOLS SRS10P21-8 Signature Series Pistol Grip Aviation Aircraft Tools Rivet Shaver Grab a Great Deal on a pre-owned! NO RESERVE! Condition: This ... moreSioux Tools Rivet Shaver is in good used condition. It has been tested and is fully functional and works just as it should. It does show signs of use and wear so please see all the photos and judge for yourself. There are scuffs. Scratches along with some identifiers such as numbers& Letters painted and engraved on it but, the unit still works great! See Photos for details. All Photos are of the actual item/s that you are buying. What you see is what you get! Item Description: This model SRS10P21-8 from Sioux Tools features a full 1 horse power motor and operates at 21.000 rpm to make shaving rivets a breeze! The Signature Series ergonomic housing features a molded grip and is designed for maximum operator comfort. Features: 8-5/8" long Weighs just 2.7 lbs! Uses industry standard 1/4-28 threaded rivet shaver bits(sold separately) Shaving" depth is adjustable in increments of.001" for very precise shaving of the rivet head without damaging the surrounding aircraft skin. MADE IN THE USA by Sioux Tools(a division of Snap-On! Contact me if you have any Questions! Good Luck& Happy Bidding! W
$
2,500
Buy It Now
$240 Shipping
Condition: Used
Location: Chino Hills,CA,USA
$
179.99
Buy It Now
$15 Shipping
Condition: Used
Location: Las Vegas,NV,USA
This is a Huck 175 used pneumatic riveter. This is a used riveter that NOT working. It is used and does show some use wear signs. Now it is not working. ... moreTHIS TOOLS IS FOR PARTS OR REPAIR. Please see the photos for further details. Paypal payments accepted. Payment due within 4 days of auction ending. Unless othwise requested! Ebays Unpaid item Assist will automatically open a case after 14 days. To avoid this. Pay or cancel your purchase before UPI closes the case. Ships out Fast. Usaully within 1 business day- I insure all Items over $100- We do combine shipping upon request. Must request before payment! If requested after payment only partial refund ddo to ebay charging on shipping fees! ALL SALES ARE FINAL. UNLESS THERE WAS A PROBLEM WITH THE WAY THE ITEM WAS LISTED OR DESCRIBED. 14 day money back return policy. If your happy with your purchase please leave a 5-star feedback or Contact us to Resolve any Issues. WE HAVE BEEN SELLING ON EBAY FOR MANY YEARS. THIS IS A NEW ACCOUNT FOR US! WE STRIVE TO DESCRIBE EVERYTHING AS ACCURATE AS POSSIBLE. MOST ITEMS ARE USED, UNLESS OTHER WISE STATED. IF THERE IS A PROBLEM PLEASE CONTACT US FIRST BEFORE LEAVING FEEDBACK! WE WOULD LOVE TO RESOLVE THE PROBLEM FIRST! THANK YOU! LONG TIME eBAY SELLER. WITH KNOWLEDGE OF CUSTOMER SACTISFACTION! STARTING A NEW VENTURE WITH A NEW ACCOUNT! DOING THE BEST WE CAN TO PROVIDE QUILITY USED TOOLS, AND ANYTHING ELSE WE CAN FIND, TO NEW OWNERS! The Best way to contact us is through eBay Messages with any questions or concerns. g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-148d913e55a-0x115-
$
127.5
Buy It Now
$8.98 Shipping
Condition: Used
Location: San Antonio,USA
$
300
Buy It Now
$0 Shipping
Condition: Used
Location: Yorktown,VA,USA
$
19.98
Buy It Now
$0 Shipping
Condition: New
Location: Long Beach,CA,USA
$
34.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
$
375
Buy It Now
$0 Shipping
Condition: Seller refurbished
Location: Crestview,FL,USA
$
20.99
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Denver,CO,USA
$
34.29
Buy It Now
$0 Shipping
Condition: New
Location: Walnut,CA,USA
$
199.99
Buy It Now
Free Shipping
Condition: Used
Location: Granada Hills,CA,USA
$
359.97
Buy It Now
Free Shipping
Condition: New – Open box
Location: Kansas City,MO,USA
$
60.46
Buy It Now
$6.99 Shipping
Condition: New
Location: USA
$
257.25
Buy It Now
$0 Shipping
Condition: New
Location: Huntington Beach,CA,USA
$
89.91
2d 19h 51m 35s
0 bids
$25.8 Shipping
Condition: Used
Location: Canada
$
11.99
Buy It Now
$3.99 Shipping
Condition: Used
Location: San Antonio,USA
$
19.85
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Long Beach,CA,USA
$
80
Buy It Now
$15 Shipping
Condition: Used
Location: Port Orange,FL,USA
$
39.99
Buy It Now
$0 Shipping
Condition: Used
Location: Chambersburg,PA,USA
$
195.99
Buy It Now
$0 Shipping
Condition: New
Location: Romulus,MI,USA
$
618.45
Buy It Now
$0 Shipping
Condition: New
Location: Huntington Beach,CA,USA
$
44.98
Buy It Now
$0 Shipping
Condition: New
Location: Chino,CA,USA
$
308.82
Buy It Now
Free Shipping
Condition: New
Location: Canada
$
45
Buy It Now
$8 Shipping
Condition: Used
Location: Hudson,NH,USA
$
89.1
Buy It Now
$13 Shipping
Condition: Used
Location: Kent,WA,USA
$
425
Buy It Now
$31 Shipping
Condition: Used
Location: Signal Hill,CA,USA
$
1,779.75
Buy It Now
$0 Shipping
Condition: New
Location: Huntington Beach,CA,USA
$
1,695
Buy It Now
$0 Shipping
Condition: New
Location: Romulus,MI,USA
$
147.96
Buy It Now
$0 Shipping
Condition: Used
Location: China
$
865
Buy It Now
$0 Shipping
Condition: New
Location: Romulus,MI,USA
$
219.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
Hand Rivet Squeezer Kit- Very Nice Kit Includes everything in picture. Klassic Air Tool” Hand Rivet Squeezer(NEW) Model# KTC152-3 Heavy Duty Hand Rivet ... moreSqueezer Accepts.187 shank rivet sets Stainless Steel handle and yoke 3” reach Adjustable set holder AN470 Rivet Sets- 187 Shank- NEW) 4 sizes 3/32. 1/8, 5/32, 3/16 2 Flush set Please email with any questions. The Tools the Pro’s use… All Tools are inspected and operated before you receive them. Money Back*Guaranteed* We Ship Worldwide
$
36.98
Buy It Now
$0 Shipping
Condition: Used
Location: Riverview,FL,USA
Click to Enlarge Click to Enlarge Hydroponic System Inside Home& Kids Outdoor& Garden Call Toll Free 1-877 969 4638 From 10am-7pm(Mon-Fri) Pacific ... moreStandard Time X5034 1/ 4" Air Air Riveter Rivet Gun Pneumatic Rivet 5/32" to 1/4" Condition: Brand New SKU#X5043. Product Details: Powerful durable. High speed production tool. Quick release air valve permits cylinder to return quickly for high speed assembly operations: Prevents overloading for long life Performs well at any angle Gets into hard-to-reach areas Provides quick. Quiet and comfortable operation preventing user fatigue. Air Inlet Thread NPT: 1/4" Rivet Capacity: 5/32" 1/4" Shipping& Handling Cost Destination Free Domestic US 48 States(Physical Address) $22.00 Apo.Po Box, HI, AK, PR $32.00 Canada Store Policy Contact Us Thank you for your business! We strive for a perfect 5 Stars in our Detailed Sellers Ratings! If you feel you did not receive 5 star service. Please contact us so we can resolve any issues. Toll Free 1-877 969 4638 Office Hour 10 am-7pm(Monday- Friday) Pacific Standard Time. Email: Respond within 12-24 Business Hours Again. We strive for 5 Stars in our Detailed Sellers Ratings. please let us know if we have come up short so we can improve the buying experience for you! We care about customer service! Payment We accept PayPal. Credit Card sales tax will be charged on any orders shipped to California Shipping 99% order leave our warehouse within 1-2 business days. These are estimated shipping times and not guarantees. On the off chance that we become aware of any delays or changes in inventory status. We will notify you via e-mail. Domestic standard delivery transit time frame from 2-7 Business days once leave warehouse(UPS/ FEDEX/ USPS) APO.PO BOX, PR, AK, HI& Canada from 7-21 business days(UPS/ USPS) International Buyers: Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your coun
$
38
Buy It Now
$0 Shipping
Condition: New
Location: Warwick,RI,USA
$
229.99
Buy It Now
$0 Shipping
Condition: New
Location: Portland,OR,USA
$
125
Buy It Now
$0 Shipping
Condition: Used
Location: Stony Brook,NY,USA
$
23.63
Buy It Now
$0 Shipping
Condition: New
Location: Huntington Beach,CA,USA
$
359.97
Buy It Now
Free Shipping
Condition: New – Open box
Location: Kansas City,MO,USA
$
35
Buy It Now
$8.5 Shipping
Condition: Used
Location: San Antonio,USA
$
288.75
Buy It Now
$0 Shipping
Condition: New
Location: Huntington Beach,CA,USA
$
19.99
Buy It Now
$0 Shipping
Condition: Used
Location: San Antonio,USA
$
60
Buy It Now
$14 Shipping
Condition: Used
Location: Ford,WA,USA
$
650
Buy It Now
$25 Shipping
Condition: Seller refurbished
Location: Tacoma,WA,USA
$
20
17h 49m 13s
0 bids
$5 Shipping
Condition: New
Location: Norwalk,CA,USA
$
195.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
Hand Rivet Squeezer- Top Quality Made from drop forged stainless steel. Tool has a long handle design that provides plenty of leverage. Includes an easily ... moreadjustable set holder and excepts.187" rivet squeezer sets. Klassic Air Tool” Hand Rivet Squeezer(NEW) Model# KTC152-4(4" reach) Heavy Duty Hand Rivet Squeezer Accepts.187 shank rivet sets Stainless Steel handle and yoke 4" reach Adjustable set holder Please email with any questions. We stock one of the largest inventories of rivet squeezer sets in the world. Please see our store or contact us if you don't see what you are looking for. AN470 Universal. AN455 Brazier, AN430 Round, AN450 Tubular, AN456 Modified Brazier, AN442 Flat, Flush, AN435 Button, Boeing BACR15FT, Huck, Hi-Shear, etc. The Tools the Pro’s use… All Tools are inspected and operated before you receive them. Money Back*Guaranteed* We Ship Worldwide
1 2 3 4 5 6 7 8 9 10 11 12
 In 

Past Items  
 
TERMS AND CONDITIONS; All products are SOLD AS IS and UNABLE TO TEST unless otherwise noted in the description. Please read complete description and look closely at photos. Please ask all questions. Or request additional information prior to bidding on items. All sales are final, and all products are sold without warranties or guarantee, and no returns are accepted. Shipping Insurance included in Shipping and Handling. All items will be shipped no later than the next business day after CLEARED payment is received by 4pm EST, Monday through Friday. Truck Shipment. Please email us your zip code for shipping cost or arrange own freight from 45459* You are bidding on a- Used Surplus. Bracker Radial Machine Model RN280 Orbital Riveter; Voltage: 3x440, Cycles: 60, HP: 0.74, Amp: 1.6, and RPM: 1680; lift table shown in photos not included with riveter. ... morecan be purchased separately( see photos) BR. Please Visit Our Ebay Store For More Items!
Fitsdirectly on the G-701. G-704, G-749 or G-845 CherryMAX® riveters. Normal 0 false false false EN-US JA X-NONE Use toinstall Bulb and Wiredraw CherryMAX® rivets in 1/8. 5/32 and 3/16"diameters, in all head styles and grip lengths. up to—4 grip protrudinghead and—5 grip in the flush head Wiredraw CherryMAX®. Item is in good condition with surface scratches New sells for over $600
Marson Klik Riveter Model PHT-4 Stock No 39017 Maximum Air Pressure 85 PSI USED Works Great What you see in photos is what you will get. International Shipping available. Please Contact us for shipping quote before buying. We Buy Excess Inventory and Broken Gauges. Free Estimates to Re-build Your Products. e5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-13e62da8221-0xff-
I don't know why exactly but this is a die welded on to a ratchet socket. So apparently usable on a 1/2" ratchet. Weighs 11 ounces. Die says 13 NC Winter USA 1/2.
selling a riveting gun. comes with everything pictured. sold as is!
AT540 SCREW KNOCKER/ REMOVER WITH APEX 1/4" BIT-AT540 SCREW KNOCKER-0.401 SHANK-INCLUDES A 1/4" APEX BIT-PIN ON DRIVE IS PUSHED IN-HAS SANDED MARKS WHERE MILITARY ETCHED NUMBERS WERE REMOVED( cosmetic) COMES EXACTLY AS PICTURED! GREAT FIND! 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-13e68b67b8b-0xf1-
This is a listing for a Baltec Radial Riveting Machine Model RN180. Includes TWO operating manuals! Specifications: Single Spindle 1X120 V 60 cps Capacity 0.5-6mm; 0.02 to 0.23" Air Pressure 14-88 psi Riveting Pressure max 1320 lbs Riveting Time 0.1- 5.9 sec Working Stroke 0.2"1.2" Motor: 115 Volts.37 HP 1750 RPM 4.6 Amp 60 Hz Weight: Riveter 132 lbs Control Box 22lbs Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless ... moreyou have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before o
This auction is for VERY NICE. VERY Low Use Atlas Copco Model LBB34 Drill Motor. 3300rpm) Ive sold these drills for a long time and Never have I received them in this good of condition. They are always Scratched up and for this to be like this could not have been used for more that a day or two. Its that nice. This Drill is made in Sweden and retails for over $800 new. This is no cheapie by any means. About the size of a palm drill which is very comfortable. Also Nice and quiet compared to many others. Some listings on ebay have countersink cages. Drill bits, etc listed as a group to lure in more bids. If you would like those items please contact me for a pkg deal. Thank you. FREE SHIPPING IN THE US. INTERNATIONAL Priority SHIPPING WILL BE DISCOUNTED TO MAKE IT FAIR. Dont forget to check out our other aviation related auctions including aircraft ... moretools. Thanks Check out my! Be sure to add me to your! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13e69470c0a-0x102-
Great Cleco E5 Rivet gun. Very easy gun to use. Very versatile. Will allow you to lightly hit 3/32" rivets and pound home the larger 1/4" Rivets when needed. A $700+ gun new. No need to spend that kind of money. Standard shank barrel Low shipping Check my other items for other aviation related tooling. Check out my!
Preowned BRACKER Radial Riveting Machine. Model RN 101, S/N 11362(New 1976) Maximum capacity(rivet shank diameter) Air pressure Riveting time Maximum stroke length Table working surface Throat depth 0.02" to 0.23" 28 to 85 P.S.I. 0.8 to 6.1 seconds 1.2" 11-7/8" L-R x 10-1/4" F-B 6.875" Equipped With Manual height adjustment of radial riveting head on round column Pressure adjustment with air regulator and pressure gauge Remote electric foot pedal control 1/3 H.P. 3/60/230-460 volt 1.680 R.P.M. drive motor and electrical controls Machine is wired for 230 volt operation. Approximate Weight(Including Table) 350 Lbs. We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY)
Up for sale is WESPRO BR316 3/16" Blind Air Riveter Economical Model! The item is pre-owned and shows minimal signs of wear but is in good working condition. The photos on this listing are of the actual item you will be receiving. Comes with everything pictured. Nothing else other than shown on the pictures is included. If you have any questions regarding this listing please feel free to ask and we will get back to you ASAP! Thank you! Features Ideal for industrial and automotive use in a variety of applications. Heat-treated alloy steel jaws for extended life Light-weight and powerful Specs Stroke Length in. mm) 0.55(14) Length in. mm) 10.1/2(267) Hose Size in. mm) 3/8(9.5) Air Cons. cfm(cmm) 4(0.11) Weight lbs(kgs) 3.3(1.5) Noise Level dB(A) 76 Setting Capacity in. mm) 3/32(2.4) 1/8(3.2) 5/32(4.0) 3/16(4.8) Air Inlet(NPT) 1/4 Pulling ... moreCapacity lb(kg) 2.000(909) Vibration Level m/s² 1.3 Shipping Free We ship only in the(United States) NO INTERNATIONAL SHIPPING. Paypal is the only accepted method of payment. Payment must be received within 7 days of auction. Your satisfaction is our main concern. If for any reason you are unhappy with your purchase. Kindly return the item within 3 days after receiving. Returns accepted for a full refund, except for 10% restocking fee. Buyer is responsible for shipping costs incurred for shipping product back. Return postage is non-refundable. Thanks for Bidding!
FOR SALE IS 1 USED JIFFY/UAT SNSP 5/16" 10) 9044 LOCKBOLT NOSE ASSEMBLY LENGTH FROM GUN LINE 2-11/16" INSTALLS SHEAR AND TENSION PULL TYPE NAS GP LOCKBOLT FASTENERS FITS HUCK 353/225/245& CHERRY G-85. G-87 PULL GUNS THIS TOOL NO LONGER IN PRODUCTION. ANVIL IS HAND INSCRIBED 91137 ON WIDE SECTION OF ANVIL AND 91129 ON BOTTOM PART OF ANVIL. COLLET IS MARKED"UAT 9044-BM 5/16" ALL TOOLS IN VERY GOOD USED CONDITION TOOL PICTURED IS THE TOOL FOR SALE. 100% REFUND IF YOU ARE NOT HAPPY WITH PURCHASE RETURNS: PURCHASE PRICE WILL BE RETURNED IF CUSTOMER WISHES AS LONG AS THE TOOL IS RETURNED WITHIN 30 DAYS OF RECORDED DELIVERY DATE. SELLER CHARGES SALES TAX FOR ITEMS SHIPPED TO WASHINGTON STATE(0.090% FREE SHIPPING FOR ALL UNITED STATES BUYERS IN THE LOWER 48. THIS INCLUDES DELIVERY CONFIRMATION. WILL SEND BY USPS PRIORITY MAIL(2 ... moreTO 3 DAYS DELIVERY TIME) WILL SEND TOOLS WITHIN 1 DAYS OF CONFIRMED PAYPAL PAYMENT AND EMAIL YOU ON THE DATE TOOLS ARE SENT. WORLDWIDE SHIPPING AVAILABLE AT ADDITIONAL SHIPPING COSTS. LIABILITY: BUYER IS RESPONSIBLE FOR THE SAFE AND PROPER USE OF ITEM(S) PURCHASED FROM ME AND THE BUYER AGREES TO HOLD THE SELLER FREE OF ANY LIABILITY FOR ANY INJURY. LOSS OR DEATH RESULTING FROM THE USE OR MISUSE OF ANY ITEM(S) PURCHASED FROM ME. 7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw5%7Fos1%3E%3E7-13e74905833-0xfc-
Ingersoll Rand Industrial Riveter- Model 4- Heavy Duty- See video Below* If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
This Sale is for a Chicago Pneumatic CP-214 Compression Riveter With RT-Angle Head. Chicago Pneumatic Model: CP-214 Compression Riveter· Right-Angle Head· 3000 lbs. of Force SOLD WITH A 14 DAY RIGHT OF INSPECTION Please CLICK HERE for our new eBay Manuals Store. First Choice Manuals" INTERNATIONAL BIDDERS SHIPPING COST NOTICE: Please request a shipping quote directly from us. EBay's shipping calculator may be quoting incorrect rates. Please email us for a discounted shipping quote prior to bidding on an item. Our office hours are 9-5 M-F Eastern Standard Time. U.S. Terms& Conditions Emails Please use Ebay’s Message System to communicate with us. Ebay’s message center provides for the most effective communication. Emails sent directly can be overlooked or filtered by our server which only causes frustration to all parties. ... moreAnswering Questions Avitar’s business hours are Monday through Friday from 9:00 a.m. 5:00 p.m. Eastern Standard time. We will answer questions during those hours prior to the end of the auctions. Questions received over the weekend or on holidays will be answered Monday morning. Shipping Notes Shipping costs are to the US(Lower 48 States) Local pick-up is available by appointment only. Alaska and Hawaii residents please e-mail for a shipping quote before bidding. Shipping& Handling All items are professionally packed to arrive undamaged. UPS is our standard domestic carrier. International bidders please note that we will use USPS Priority mail for smaller. Less expensive items. However, USPS has both size and weight restrictions as well as insurance limits that vary from country to country. Any item that exceeds the aforementioned parameters will be shipped via Federal Express. We will pass along our substantial Federal Express discount and are happy to quote shipping cost to potential bidders prior to bidding. Please be aware that USPS takes longer than other carriers. We DO NOT ship to Egypt. Libya, Indonesia, Pakistan, Russian Federation, Yemen. Argentina, Brazil, o
THIS IS A VERY NICE USED CLECO 2X RIVET GUN IT HAS A STANDARD.401 INSIDE DIAMETER AND HAS A REGULATOR THE GUN HITS HARD AND HAS A NICE TRIGGER SHIPPING WILL BE FREE ANYWHERE IN THE USA AND APO CONTACT ME THROUGH EBAY NOT EMAIL
THIS IS A REALLY NICE POWERFUL CP-214 CHICAGO PNEUMATIC ALLIGATOR RIVER SQUEEZE THE SQUEEZER LOOKS AND WORKS GREAT IT HAS FULL POWER AND COMES WITH 14 VARIOUS SQUEEZE SETS. 40, 30, 21& FLUSH) SHIPPING WILL BE FREE ANYWHERE IN THE USA Posted with
This is a US INDUSTRIAL TOOL C YOKE RIVETER its in good shape and a good deal for any one doing any sheet metal work or work around the shop dont miss out on this tool
This is a used Chicago 2x rivet hammer works very nice dont miss out on this deal
Excellent Condition. Clean Riveter HUCK 229 My Price is $1.000 Under the retail price of this. AND in Great Condition. SureSet 229 Pneudraulic Rivet Gun No. HUK-229 SureSet 229 Pneudraulic Rivet Gun. SureSet 229 Pneudraulic Rivet Gun Designed to install Grip-Rite and Auto-Clamp SureSet Rivets. As well as LockBolt, Magna-Grip, Magna-Bulb, etc fasteners, these pneudraulically powered tools offer both a lightweight, easy-to-use design and proven durability. The Model 229 is designed for maintenance and repair applications where 3/32in. to 5/32in. fasteners are used but rated for most 3/16" and 1/4" fasteners depending on the fastener. This lightweight(4.75 pounds) easy-to-use tool provides a production rate of up to 30 fastener installations per minute. Ive sold several of these to folks that normally rent the tools for Fender and ... morebumber work on trucks. I have some heads available for extra but limited. If you have any questions. I will try my best to help you out. Thanks
i have flat faced. Dished, and misc.stuff on far right
YOU ARE BUYING FROM A SELLER WHO HAS*ALWAYS* HAD 100% POSITIVE eBAY FEEDBACK SINCE 1999. NOT JUST IN THE PAST 12 MONTHS. BID OR BUY WITH CONFIDENCE! ITEM DESCRIPTION: This is a used refurbished Huck 99-1716-1DG 5/32” Offset Nose Assembly. It fits the Huck Model 206-375 hydraulic installation tool. It can also be used on the Huck 225. 245, 2500 and perhaps other tools when used with the appropriate adapters. It is used to install-05(5/32” BR MLS Self-Releasing fasteners. Includes data sheet. The original rubber pintail deflector is missing. So I have substituted a long rubber cap. It can easily be removed to discard the pintails or you can cut a slot into it so it works like the original deflector. ITEM CONDITION: I have personally refurbished this nose assembly. Which is in very good used condition. I have personally disassembled it, removed ... moreall corrosion, cleaned, polished and lubricated all parts, and reassembled. The threads and jaws are in good condition. There are some cosmetic surface scuffs, scratches, and grinding marks. The outer metal guard is split at the top as you can see in the photos, but it’s still functional. There is some engraving on the front. This nose assembly is ready to be put to work. PHOTOS: Here are some detailed photos of the exact item you are buying: SELLER’S TERMS AND CONDITIONS– PLEASE READ CAREFULLY! By placing a bid on or purchasing my item(s) You are agreeing to the following terms and conditions. GENERAL: Photo(s) shows the actual product I am selling. What you see in the photo(s) is what you get. I do my best to accurately describe the actual condition of the item. Feel free to email me with any questions. I recommend that you ask questions BEFORE you place a bid. This item is sold strictly as-is. And no warranty or guarantee is expressed or implied. In general, all of my sales are final and there are no returns. Please see my Feedback Policy below. Check out my 100% positive feedback and bid with confidence! PAYMENT: Payment MUST be completed within 3 days of end-o
Vintage Malco 2 in 1 Adjustable Hand Riveter. Ideal for reaching into corners and recessed areas. Slim nose design for smaller areas. Has a red vinyl cushion grip. Heavy duty all steel construction. Measures about 9 1/2" at the longest. Comes with 8 rivets. Instructions, and plastic pouch. Uses a 3/8" wrench for adjusting, not included. Riveter is used and in great working condition. Please see pictures. They are part of the description. Smoke-free home. Please email any questions. I also have other tools for sale in separate auctions. The shipping charges listed are based on the actual cost of shipping. Using the exact weight and distance with no additional fees. Please use the“Shipping& Payments” tab to check for possible shipping options that may save you money. Items usually ship within 24 hours of receiving cleared payment(excludes ... moreweekends) Thank you for looking. Have a great day! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13e7ffac576-0x102-
Cleco Pneumatic E4 4X Rivet Riveter Gun Description- Part Number: E-4- Manufacturer: Cleco- Cleco Type: 4X- Takes.401 sets- Blows per minute 1600- Bore: 1/2" Aluminum Capacity: 3/16" Tested and works as it should. Comes as pictured#7593( JK)5/6/13 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know your feelings. We can’t ... morefix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dimensional restrictions. International weight and size restrictions v
Up for auction is a nice AVDEL GENESIS NG2 Hydro-Pneumatic Rivet Tool. Its in good shape and works well. Comes as pictured.
Chicago Pneumatic 2X Riveter Rivet Gun Description- Manufacturer: Chicago Pneumatic- Shank: 0.401" 2600 Blows Per Minute BPM- Aluminum Rivet Capacity: 5/32" Weight: 2.5 lbs. Length: 5-3/4" Tested and is in good working condition. 7608( JK)5/7/13 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know your feelings. We can’t ... morefix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Shipping: The shipping calculators in eBay only cover the US and Canada and are generally 40% 60% higher than our shipping rates. Please contact us for an accurate shipping cost before paying the invoice. If you need International Shipping please contact us for a quote before bidding. We can provide rush shipping. Please call for a quote. All orders are shipped within 1 to 3 days prioritized from the date we receive payment, not counting weekends and holidays. Size and Weight: The USPS has a 70lb weight limit with dimensional restrictions. UPS has a 150lb weight limit with dimensional restrictions. International weight and size restrictions vary. W
MADE IN THE USA We sale& auction in groups of similiar items and sizes. We currently have dozens of Swagelok Tools and other Hand Tools and Accessories. Please look at pictures carefully. The item in the pictures is the item you will receive! Check the Condition Description for flaw details. Imperial 364-FH Lever Type 1/8" 3/8 Radius Tube Benders and extra handle to custom length. If you've use these you will know what to do with the extra depending on common bends. We list new items very frequently so be sure to check back often. PAYMENT We only accept PAYPAL. Final sale price is non-negotiable. Payment due within 3 days. If for some reason you can not make payment. Please contact us as soon as possible. SHIPPING We only ship in the 50 United States. Everything is packaged with care. We will package in the best manner we see ... morefit according to item purchased. We will gladly and promptly leave feedback once we receive it! All items come from a smoke free home so be sure to check out my other items. Thanks for your interest and happy bidding. Heather& Randy Arvello Powered by The free listing tool. List your items fast and easy and manage your active items.
For sale Genuine CherryMax Hand Rivet puller. Hydrulic puller works great. Needs a pulling head available from Cherry Textron. Priced to sell!
THIS IS A HAND POP RIVITER# PRF-440 SCISSORS TYPE MADE BY THE UNITED SHOE MACHINERY CORP. THIS IS ONE SOLID TOOL. GOOD LUCK BIDDING.
This is a Huck 200 riveter with a 5/32" blind bolt nose piece. It cycles and shifts like it should. Surplus from a major aircraft company.
These are Cherry Textron G700 Cherrylock riveters. They do not cycle. They are sold as is.
These are Cherry Textron G87D riveters. They do cycle but need to be serviced. They are sold as is. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13e88c0a48e-0x100-
aims U.S.A! HUCK/ USTACO PNEUDRAULIC RIVET INSTALLATION TOOL- GBP352 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in U.S.A by Huck/ USTACO. This is the Heavy Duty Pneudraulic Rivet Installation Tool in good condition. Huck Models 352 are heavy-duty. Reciprocating, pneumatic tools designed for high speed installation of HUCKBOLT Fasteners and Huck Blind Fasteners and for crimping HUCKRIMP nuts. Model# GBP352. Features: The rectangular-shaped handle is rigidly ... moreattached to the adapter. Which, in turn is bolted to the cylinder. The spindle and nose assembly. Located in the top of the handle, install the Huckbolt Fasteners. Inside the handle is mounted the spindle-operating lever with its antifriction roller. The upper ladder bearing cage and lower bearing on which the wedge rides, and the wedge and piston rod assembly that reciprocates between them to operate the spindle. The spindle lever. Therefore, is the connecting link between the wedge and piston rod and the spindle, which is located in the spindle housing. The lower end of the spindle lever rides in the milled slot of the wedge while the upper end straddles the flats on the spindle. During the working cycle. The wedge and piston rod move forward, pulling the lower end of the pivoted spindle lever forward. This forces the upper end of the spindle lever back, bringing the spindle and nose assembly parts back with it to install the fastener. Specifications: Air Supply: 90-100 psi. Length(overall) 6-1/8" Height(overall) 10-1/2" Width(handle) 1-1/8" Width(cylinder) 4-3/4" Comes as shown in pictures. To see a Manufacturer's manual PDF: Check out the photos!
aims NICE! HUCK/ USATCO#GBP353 PNEUDRAULIC RIVET INSTALLATION TOOL read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in U.S.A by Huck/ USATCO. This is the Huck Heavy Duty Pneudraulic Rivet Installation Tool in GREAT condition. Model# GBP353. Huck Models 353 are heavy-duty. Reciprocating, pneumatic tools designed for high speed installation of HUCKBOLT Fasteners and Huck Blind Fasteners and for crimping HUCKRIMP nuts. Features: The rectangular-shaped handle is ... morerigidly attached to the adapter. Which, in turn is bolted to the cylinder. The spindle and nose assembly. Located in the top of the handle, install the Huckbolt Fasteners. Inside the handle is mounted the spindle-operating lever with its antifriction roller. The upper ladder bearing cage and lower bearing on which the wedge rides, and the wedge and piston rod assembly that reciprocates between them to operate the spindle. The spindle lever. Therefore, is the connecting link between the wedge and piston rod and the spindle, which is located in the spindle housing. The lower end of the spindle lever rides in the milled slot of the wedge while the upper end straddles the flats on the spindle. During the working cycle. The wedge and piston rod move forward, pulling the lower end of the pivoted spindle lever forward. This forces the upper end of the spindle lever back, bringing the spindle and nose assembly parts back with it to install the fastener. Specifications: Pulling Capability: 9.000lbs. Stroke: 7/16 in. Air Supply: 90-100 psi. Length: 6-1/8" Height: 13-1/4" Width: 1-7/16" Width(cylinder) 6-1/2" Comes as shown in pictures. To see a Manufacturer's manua
S10 Atlas Copco Model: RRH06P 7 Bar 100Psi We hooked up air to this and everything appeared to be in working order Shipping $15 We have over 2000 AirCraft Air Tools. Please Check out our Other Ebay Auctions This Lot is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia AirPort. I will be Happy to answer any questions you may have. Lot is being sold as is. The specs on this Lot are subject to buyers inspection We have Excellant feedback rating. Our goal is to keep you. Our customers satisfied. Please check out our other forklifts. Machinery, and accessors on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 ... morelbs Industrial Plant Service Millwrights- Riggers- Plant Relocations- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
This Auction Includes The Following Item(s) USED IN MINT CONDITION Please see our photos for more detail ITEM: JONNESWAY JAT-0115V AIR RIVETER AIR-HYDRAULIC BLIND RIVETS WITH VACUUM IN CASE FEATURES AND SPECIFICATIONS: Air Pressure: 90 psi Hose Size: 3/8" Air Inlet: 1/4" Pulling Capacity: 2460 lb at 90 psi Length: 7-3/4" Style: Blind Rivet with Vacuum System Type: Air Rivet Gun Stroke Length: 9/16" Maximum Rivet Capacity: 1/4" Steel; 3/16" Other Materials Handle Material: Steel Handle Type: Standard Grip UNIT IS IN MINT CONDITION CASE HAS A CRACK ON A CORNER(SEE PICTURES) BIDDING STARTS AT A PENNY! This Item Will COME Just as Seen in The Photos. Nothing More, nothing Less WE TRY TO SHIP NEXT DAY AFTER PAYMENT HAS BEEN RECEIVED EXCEPT ON WEEKENDS INTERNATIONAL SHIPMENTS WILL BE SENT AS MERCHANDISE AND BE INSURED ... moreFOR THE FULL WINNING BID AMOUNT PLUS THE SHIPPING FOR INSURANCE PURPOSES(CHECK WITH US FOR INSURANCE COST) BUYERS ARE RESPONSIBLE FOR ANY TAXES OR IMPORT DUTIES LOCAL PICK UP IS FINE WE ONLY ACCEPT PAYMENTS MADE THROUGH PAYPAL WE SHIP UPS FOR DOMESTIC SHIPMENTS(NO P.O. BOXES) KANSAS AND LOCAL PICK UP CUSTOMERS WILL PAY STATE SALES TAX IN ADDITION TO ANY SHIPPING AND HANDLING CHARGES
Snap On- AD6- 6" Adjustable Wrench USA Automotive Aviation Tool Exc Cond This is a Snap On AD6. 6' adjustable wrench in very lightly used condition. The wheel works very smooth. My tools are used. Clean, aircraft quality tools in very good to excellent condition, many of them brand new. Nothing broken, chipped or abused, unless it's indicated) I try to show any flaws in the photos and description. If you're experience with us isn't as you expected you have 14 days to return the item for a full refund unless stated otherwise. I leave feedback as soon as I know that you've recieved the item and are happy with it. Feedback is important to me. I always leave it. Expedited 1-3 day shipping. I try to ship the same day after payment at the latest. There is always a tracking number. However the tracking number stops at international ... moreborders. I gladly ship overseas but can't guarantee shipping past our border. I've never had a failed shipment but delays happen out of my control. Free shipping anywhere in the USA. $23.45 shipping worldwide. Shop my store for more items. I gladly combine shipping wherever possible. Put me on your favorites list and check back for new items. Questions about an item? 253-736- 5811 Thanks. Dave Wood
This is a Boeing flush C Set rivet set. The finished face is 2-3/4" long. It has a standard.401 shank for standard rivet guns. Top quality!
| Cherry Textron Rivet Gun G704B Pneumatic Cherrymax Riveter Tool, Click to View Image Album Click to View Image Album Click to View Image Album This Auction is for a Cherry Textron Rivet Gun G704B Pneumatic Cherrymax Riveter Tool Aircraft. • Can install 1/8" 5/32" and 3/16" Cherrymax rivets • Air powered • Sold without pulling heads • Optional stem catcher bag#670A20 is recommended • NSN- 5130-01-044-7207_ No reserve for this auction! This item is being sold as-is. The condition of this item is not guaranteed. No additional items are included in this auction. Cables. Chargers, et cetera that are not listed are not included. We cannot ship outside of the continental USA. Items are also available for pickup. Thanks for bidding with us! SKU: A2-20311 Normal 0 false false false EN-US X-NONE X-NONE Quoted ground shipping cost at ... morebottom of auction page is for continental US shipments only. This excludes Alaska and Hawaii. We do not ship until full amount is paid. Payment, Our preferred method of payment is through PayPal. We also accept other forms of legal tender; please email for options. Please include auction item number and shipping address with all mailed correspondence. Any missing information with your payment will delay your shipping. Our mailing address is: Environmental Reclaim. LLC 3900 Sullivant Ave Columbus, OH 43228 All Ohio residents, must add 6.75% sales tax to their final sale price. We will not ship without the tax. Timeframe: We expect payment in a timely manner. Please make payment within four days of the auction completion or seven days after receiving a shipping quote(larger items) If payment is not received, we report non-payment to eBay and reserve the right to re-list the item. We expect all successful bidders to complete their transactions. If you don't intend to buy, don't bid. I accept the following forms of payment: PayPal Policies: Payment: Our preferred method of payment is through PayPal. We also accept other forms of legal t
Lobster Inline Pneumatic Air Riveter Rivet Gun/Tool/NutRunner- Works_ Please note: We do not sell to buyers outside of the United States of America. Too many times now. I have had to cancel and petition ebay for a return of the Final Value Fee. If for some reason you think you should be an exception to this rule, please email me to discuss. I ask your understanding on our handling time. We ship on Tuesdays and Fridays. If processing and packing does not happen in time for a Tuesday shipment. Your package has to wait until Friday. We will ship as fast as possible. Pallet Racking: Beams. Frames, decking, and uprights are all available. New and Used, in stock. Planning your next storage project. Call us and have our design consultants help you configure your storage solution. Call direct for a quote: 616-255-1837(ask for Dave. We purchase Commercial ... moreand Industrial Close outs and Liquidations.
Reach 1-1/2" Capacity 5/32" Alum. 1/8" Steel. Weight 4.5 lbs(2.1 kgs) Clamping force exceeds federal specifications.
Chicago Pneumatic Pneumatic Compression Riveter 351C– Rebuilt Professional pneumatic Rivet Squeezer“C” yoke. Designed to squeeze the rivet rather than hammering. This is a much quiter method, but more importantly, it allows each rivet to be identical to each other. These tools are very simple to operate. A single squeeze to the throttle lever will deliver the tools full force of squeezing pressure. There are many uses for rivet squeezers, including aviation, automotive, marine, computer industries, etc… We carry an extensive supply of repair parts. Yokes and rivet sets for riveting equipment. Specifications: High Quality Aluminum rivet capacity– 3/16” Steel rivet capacity– 5/32” Yoke reach– 2 1/8” Closed height– 25/32” Rivet set shank diameter- 187 Max Force– 6.000lbs Max rivet set travel- 9/16” Overall length– 17 ½” Weight– 12.5 lbs ... moreWarranty– 1 year Free UPS Domestic Shipping(US Only) Please email any questions… All tools tested by our expert tool mechanics… Over 75 years experience in supplying high quality tools. The Tools the Pro’s use” We Ship Worldwide One Year Warranty Parts. Labor, and/or Replacement This warranty covers any parts that are found defective as to material or workmanship.
Prg 510-33 pneumatic riveter Made i USA. 47666 USM CORPORATION Fastener Division Shelton. Conn. Max. air 85 PSI. US patent 3,3224,700.
Up for bid is a 7X rivet gun. Ingersall Rand. This gun is not for'sissy's' If you are shooting 1/4" rivets, this gun will do it without breaking a sweat. Very nice trigger pull also. Works great but I am no longer doing heavy checks or repair station work. 498 shank and the spring is included. You will need the spring. No international shipping Any questions or concerns please contact me.
Chicago Pneumatic NO:80 Riveting Hammer Air Riveter Model: Boyer No.80 Hammer Size 1/16 x 8 I will disassemble the Hammer to ship USPS Priority Mail® Medium Flat Rate Box Please check photos Thank you
CHERRYLOCK OFFSET PULLING HEAD. H642-6C, COUNTERSUNK HEAD DOES HAVE SOME PRIOR MARKINGS ON TOOL. SELLING AS IS. PICTURED. PLEASE ASK ANY QUESTIONS BEFORE BIDDING. WINNING BIDDER MUST CONTACT US WITHIN 3 DAYS OF AUCTION CLOSING. PAYMENT IS EXPECTED WITHIN 7 DAYS. Pictures are of the actual item. No accessories or manuals included unless otherwise pictured. All items are sold-as-is. We are surplus equipment dealers and do not have the ability or expertise to test equipment for functionality beyond plugging it in and describing what we observe as best we can. TOOLS ARE SOLD AS IS. ALL OUR TOOLS ARE SURPLUS ITEMS THAT WE PURCHASE FROM AUCTIONS THAT INCLUDE AEROSPACE. AVIATION, AIRCRAFT, AND AUTOMOTIVE TOOLS. SOME MAY HAVE MINOR SURFACE RUST, AS WELL AS MECHANICS NAMES OR MECHANICS NAMES MAY BE SCRAPED OFF. WE SHIP WORLDWIDE! Check out my other ... moreitems
3.5" offset flush rivet set with.498 shank. Used Posted with
19 Pieces MIX Hand Rivet Squeezer 3/16" Shank What you see is the one you will receive. We Ship US 48 State Only.
This auction is for a Blindniet-Setzgerat Blind Rivet Tool Model BZ 49. It comes as pictured in case with wrench tool and paperwork. I bought this item for one small job and never needed it again. It still looks new. This is a very large rivet tool measuring 20.5 inches. Thanks For Looking And Happy Bidding!
THIS IS A NICE USED ATS 3X RIVET GUN IT HAS A STANDARD.401 INSIDE DIAMETER AND HAS A REGULATOR& SPRING THE GUN HITS HARD AND HAS A NICE TRIGGER THE GUN ALSO HAS A FLUSH SET AND 2 BUCKING BARS SHIPPING WILL BE FREE ANYWHERE IN THE USA AND APO CONTACT ME THROUGH EBAY NOT EMAIL
UsedDewalt DW896 16 Gauge Metal Nibbler 3.0 Amps. This nibbler cuts great and the motor is strong. Has some scuffs and scratches from use. Shipping to the USA only. Thank you for looking at this auction.
you are bidding on the flat faced.Button head rivets,and the threaded bolts between not the three tools with handles(i dont know if they are complete or function as manufactured) when i find out they are servicable i will put them up for bid.flat face on left and buttonhead on right. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13e9df2fa65-0x100-
THIS IS A SET OF 3 REVIT HAMMERS AND SHANKS INGERSOLL-RAND 2X OR AVC10 CHICAGO PNEUMATIC CP-4444 S CYL OR 3X USATCO 4X AND 10 SHANKS THERE IN GREAT WORKING CONDITION AND THESE ARE WHAT ANY ONE THAT DOSE ANY REVITING OR BODY WORK WOULD NEED IN THERE SHOP OR HOME THERE ARE SOME MARKINGS ON THIS TOOL FROM PAST OWNERS AND COMES WITH EVERY THING YOU SEE DON’T MISS OUT ON THIS TOOL THANKS FOR LOOKING. Normal 0 false false false EN-US X-NONE X-NONE
One I know works just needs to be serviced the other two I never tried just saved them for parts Posted with
FOR SALE IS 1 USED HUCK 99-1277-10(5/16" SHARKBITE NOSE ASSEMBLY. TOOL IS OBSOLETE. PART NUMBERS INCLUDE ANVIL: HUCK I.E.D. 114265A US PAT NO. 4 347 728 COLLET: 114183-D COLLET EXTENSION: 90665 L RETAINING NUT: 113753-C INCLUDED IS COPY OF 99-1277 TOOL PATENT ABSTRACT TOOL PICTURED IS THE TOOL FOR SALE. 100% REFUND IF YOU ARE NOT HAPPY WITH PURCHASE RETURNS: PURCHASE PRICE WILL BE RETURNED IF CUSTOMER WISHES AS LONG AS THE TOOL IS RETURNED WITHIN 30 DAYS OF RECORDED DELIVERY DATE. SELLER CHARGES SALES TAX FOR ITEMS SHIPPED TO WASHINGTON STATE(0.090% FREE SHIPPING FOR ALL UNITED STATES BUYERS IN THE LOWER 48. THIS INCLUDES DELIVERY CONFIRMATION. WILL SEND BY USPS PRIORITY MAIL(2 TO 3 DAYS DELIVERY TIME) WILL SEND TOOLS WITHIN 1-2 DAYS OF CONFIRMED PAYPAL PAYMENT AND EMAIL YOU ON THE DATE TOOLS ARE SENT. WORLDWIDE SHIPPING AVAILABLE AT ... moreADDITIONAL SHIPPING COSTS. LIABILITY: BUYER IS RESPONSIBLE FOR THE SAFE AND PROPER USE OF ITEM(S) PURCHASED FROM ME AND THE BUYER AGREES TO HOLD THE SELLER FREE OF ANY LIABILITY FOR ANY INJURY. LOSS OR DEATH RESULTING FROM THE USE OR MISUSE OF ANY ITEM(S) PURCHASED FROM ME. ao5pta.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bisk%3Eao5pta-13e9f26d600-0xf6-
Attexor portable clinch systeme.I have tested on aluminium and thin metal and the units work well.See the website manufacturer for mor spec.No charge for hand&pack.
serial# 1-9428 excellent working condition tested ask all ur questions before bidding picture is of actual item if you need more pics send me email and I will get it to you in 24 hours as long as there is a day left before end of auction no refunds we do not cancel bids shipping includes tracking number payment due no later than 2 days from end of auction pet free and smoke free home. Thanks for looking and good luck! Posted with
Emhard Industrial PRG510A pop pneumatic air riveter Manufacture: Emhard Description: Emhard Industrial PRG510A pop pneumatic air riveter Condition: Used Sold as pictured Warranty: 90 Day warranty Please feel free to contact us if you need more information Wesbell Technologies ships all domestic orders via UPS Ground. If you would like the order shipped on your account please send an e-mail after you purchase the item and we would be happy to adjust your invoice. Thank you for looking Customer Satisfaction Beyond the Call Wesbell Technologies 555 Lucy Garrett Road Roxboro. North Carolina 27574. USA 1-336-322-0600 Ext. 262 919-428-3080 Powered by The free listing tool. List your items fast and easy and manage your active items.
Ingersoll Rand 1X Rivet Gun Model AVC 10 This gun has a built in air regulator next to the air inlet. Aviation Surplus From a working environment Excellent Working Condition Uses Stubby Rivet Sets Tested and Lubricated Typical Picture See my Ebay Store
Jiffy 4X Rivet Gun Model 400 This model was made before APT bought out the Jiffy company. The only difference between this gun and the newer one is the trigger type. This trigger allows for even more teasing than the newer Jiffy/APT model 400. One year warranty* Aviation Surplus From a working environment Excellent Working Condition Uses Standard rivet Sets Cleaned. Lubricated, and Tested. Parts replaced as necessary For maximum shipping savings on multiple orders. Please request an invoice for correct shipping charges before paying. One year warranty. Does not cover misuse. I will repair. Replace or refund at my discretion if gun fails within one year of date of purchase. Typical Picture See my Ebay Store ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13ea3ebbc5e-0x108-
You are bidding on(1) Chicago Pneumatic CP-OY Rivet Gun#H526667- there are no other mfg markings on the gun with reference to RPM's etc. There are engravings on the body of the rivet gun. All items are being sold as USED aerospace industry surplus- has been cleaned and tested- found to be in great working order. Thanks for looking. I do combine shipping! International buyers- USPS is the ONLY shipping option- please email for shipping costs prior to bidding. Paypal is the ONLY form of payment accepted. I usually am in contact with the buyer within the first 24 hours- if you do not hear from me. Please feel free to email me. I do need to hear from you within 3 days of the end of the auction. I ship every day and prefer USPS or UPS Ground(US ONLY) I do NOT have access to Fed EX. In most cases. I will give you the options for shipping- the ... morecharges will be actual with no handling fees attached. I do expect payment within 10 days. If I don't receive payment within the 10 days. I will email you using the eBay invoice option to check the status and your intentions to complete the auction. If I do NOT get a response with 48 hours of that email- I will relist the item and begin the Non-Paying Buyer Process. Insurance on your purchase is entirely up to you. I have been known to over pack the items- I do take protecting your purchase very serious. If your purchase is NOT insured and it is lost or stolen- I can not be responsible. If an item is grossly misrepresented- I will work with the buyer to resolve the misrepresentation. I always leave feedback- usually within the month of the purchase. I"always" combine shipping and offer the most reasonable shipping options. Please be sure and check my other auctions. Thank you for looking! Powered by The free listing tool. List your items fast and easy and manage your active items.
Gently used. Made in USA Pneumatic C Squeeze Riveter with 3 inch yoke. For setting rivets on aircraft, cars, trailers and other metal projects. With a 3 inch reach and a 1-1/4 inch gap, it accepts standard 3/16 inch shank squeeze set(5 piece set included) and dimple dies. Precision crafted of heat-treated steel. Operates on a standard shop air compressor. Application: Rivet tool, Working Pressure(PSI) 90, Rivet Size(in. 3/16, Max. PSI: 90. FREE shipping(lower 48 states) NO international shipping.
Up for grabs is a Chicago Pneumatic rivet squeeze that's in great shape. Item may have my PID engraved. If it is, it will be very small and light and easily removed. I don't have a compressor to buff it out. I will only accept Paypal for payment. Item will ship out no later than Friday afternoon. Check my other auctions for more aviation tools. Good luck and happy bidding. Posted with On May-14-13 at 13:44:39 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: MORE RESOURCES: f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13ea595641b-0x104-
Up for grabs is an ATS Pro 3x rivet gun with 6 sets. Great trigger that is easy to feather. Item may have my PID engraved. If it is, it will be very small and light and easily removed. I don't have a compressor to buff it out. I will only accept Paypal for payment. Item will ship out no later than Friday afternoon. Check my other auctions for more aviation tools. Good luck and happy bidding. Posted with On May-14-13 at 13:08:32 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: MORE RESOURCES:
This is a Huck model 99-589 nose piece. It is used on the Huck 200 riveter to pull MS90353 and MS90354 3/16" blind bolts. The tool is in perfect condition and the jaws show no wear at all.
This tool was only used a few times. It's still in great condition, There are two items missing, the stem catcher bag and the top tray of the tool box. The box is a little banged up as well.
FSI D-100-MIL-2 BLIND HAND HYDRAULIC RIVETER KIT WITH 3-PULLING HEADS for CHERRY MAX RIVETS USED FSI D-MIL-2 RIVETER KIT IS IN EXCELLENT CONDITION! SEE PICS! D-100 TOOL WAS JUST REBUILT BY FSI FASTINING SYSTEMS. KIT IS 100% COMPLETE AND INCLUDES INSTRUCTIONS.
Atlantic Air Tool Company model 30C pneumatic C squeeze with all heads pictured included. In very good condition! Posted with
D-100-MIL-2 blind fastener installation kit NSN 5180-01-201-4979. Posted with
Pop Rivet gun MFG United Shoe Machinery Shelton Conn. Model Pro 510. 1984 in good condition for age.
Snap On 95BCP Needle Nose Pliers Aviation AutoTool Exc Cond These are Snap On 95BCP needle nose pliers in very lightly used condition. No markings. Engravings. My tools are used. Clean, aircraft quality tools in very good to excellent condition, many of them brand new. Nothing broken, chipped or abused, unless it's indicated) I try to show any flaws in the photos and description. If you're experience with us isn't as you expected you have 14 days to return the item for a full refund unless stated otherwise. I leave feedback as soon as I know that you've recieved the item and are happy with it. Feedback is important to me. I always leave it. Expedited 1-3 day shipping. I try to ship the same day after payment at the latest. There is always a tracking number. However the tracking number stops at international borders. I gladly ... moreship overseas but can't guarantee shipping past our border. I've never had a failed shipment but delays happen out of my control. Free shipping anywhere in the USA. $23.45 shipping worldwide. Shop my store for more items. I gladly combine shipping wherever possible. Put me on your favorites list and check back for new items. Questions about an item? 253-736- 5811 Thanks. Dave Wood
aims NICE! HUCK 352 PNEUMATIC RIVET INSTALLATION TOOL read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made By Huck International Mfg. This is the Huck Rivet Installation Tool in good condition. Serial# 3106 Features: The 200 Huck Installation Tool is a multi-purpose tool for high speed installation of Huck fasteners. Broad versatility permits its use for installation of fasteners requiring a double action or single action tool. Power. Speed and accuracy are obtained ... morethrough the use of a pneumatic hydraulic intensifier system. Specifications: Heigth:13" Stroke: 9/16" Comes as shown in Pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! HUCK 352 PNEUMATIC RIVET INSTALLATION TOOL NICE! HUCK 352 PNEUMATIC RIVET INSTALLATION TOOL Reliable Tool Inc. c 2011 | Powered by
JUST REDUCED Prg 510-33 pneumatic riveter Made in USA. 47666 USM CORPORATION Fastener Division Shelton. Conn. Max. air 85 PSI. US patent 3,3224,700. Rivet gun was put to the test& performed without any problems. Is in very good working order.
Assorted Rivet Sets With bucking bars- All are standard shank- Some are New Old Stock- Some are used- All are in good useable condition- Please examine pictures* If you purchase this item and are unsatisfied for any reason. You may return it within 14 days(in the same condition when sent) for a full refund.
Used Ingersoll Rand AVC12 Air Rivet Gun-Air Riveter This riveter has been disassembled and has had the seals replaced. It has also been professionally refinished with high quality paint materials. Then put back toghether This rivet gun is in great condition. Nice feathering trigger. Shipping to the USA only. Thank you for looking at this auction.
SNAP ON TL936(USA) 1/4" DRIVE RATCHET LENGTH 6.5" MINT CONDITION LIGHTLY USED Any questions please ask. Check out my! Discount on postage given for multiple items.
This is a Huck 230 riveter. It cycles sometimes but should be serviced. Has a air leak. Surplus from a major aircraft company Sold As Is!
AVDEL SYSTEMS 07530 07531 HYDRO-PNEUMATIC RIVET GUN GUARANTEED NOT DOA*CLICK THE LINK BELOW FOR MORE INFORMATION* MANUFACTURE'S WEBSITE Powered by The free listing tool. List your items fast and easy and manage your active items.
EMHART TEKNOLOGIES 5250A POP PNEUMATIC RIVET GUN W/ MCS5000 GUARANTEED NOT DOA*CLICK THE LINK BELOW FOR MORE INFORMATION* MANUFACTURE'S WEBSITE Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*55267%60%3E-13eb559eabb-0xf6-
Single Cylinder(214 Style) Quiet and easily operable C-type compression riveters are excellent for many assembly operations. Its"squeeze" action allows easy control. Exceptional accuracy and uniformity. All squeezes use standard 3/16" sqeezer sets and dimple dies. Please feel free to message me with questions. Aluminum Rivet Capacity: 1/8" Length: 11 1/2" New 1-1/2' yoke
THIS RIVET GUN IS FROM JET TOOL CO. IT IS A JET JSG 081O IT HAS A 2000 LB PULL AND 3/16 CAPACITY 90 PSI IT IS GOOD WORKING CONDITION THANKS FOR LOOKING.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*55267%60%3E-13ebbbf5133-0xf3-
Olympic Allfast rivet RV50G Puller light duty with HBM 1/8" Blind Rivet Nose. Size 7" hight Weight 2 lbs Pull capacity 600 lbs. min Stroke.625 in These items are in good working conditions. Buyer from the US lower 48 states pays $12.00 for shipping and handling. Feel free to email with any questions. Thank you for looking. Please check my other auctions for more Items.
143331403. This auction is for a MAC Quality Tools RG 100 D Hydraulic Rivet Gun(4-GMC) LOW PRICE! GREAT DEAL! Tool is pre-owned so the case/tool shows minimal wear HOWEVER. Still in EXCELLENT CONDITION! Fasteners and nose pieces included! CHECK OUT OUR OTHER ITEMS AND EBAY STORE! ALL REASONABLE OFFERS CONSIDERED! Thanks for looking If you have any questions. Or would like to see photos of anything not shown, please feel free to contact us, either via email, or on our toll-free number. This is an out of pawn item. WE ONLY SHIP WITHIN THE UNITED STATES! Can't afford it today? Ask about our layaway plan. That's right. We offer a layaway plan. Any winning bidder on any of our items can place their purchase on layaway with 20% down. We charge NO INTEREST for 90 days. And only 1.5% of the principal if you go past 90 days. A payment must ... morebe made every 30 days. All Layaways are NON-REFUNDABLE. We do NOT give money back on layaways. Please contact us if you have any questions. These are sold as is. Jewelry Guarantee If you are not satisfied with you purchase we will refund your original purchase price less original shipping cost and provided that the item is shipped back at high bidders expense within 14 days from time carrier has delivered said item! Any diamonds or precious stones will be examined upon return by a GIA professional! All refunds will be completed after examination! No exceptions! SHIPPING TERMS: Jewelry is shipped at a flat rate of $6.50 anywhere in the U.S. Powered by The free listing tool. List your items fast and easy and manage your active items.
1/4 air hydraulic rivet gun. never been used but dusty and out of warranty thus i am selling it as used. these retail over 550. great addition to anyone tool collection. Payment is due within 24 hrs from end of auction. as is no returns
This is a used D100-Mil-1 Hydraulic riveter. The kit looks to be complete. However, I am unsure of the functionality of the riveter itself and whether the hydraulic piston is actuating so the sale is for a non-working riveter and miscellaneous parts. Comes with case and what you see in the pictures which are of the actual unit. If you have any questions email me.
This was working when the entire machine was shut down so this is guaranteed to your liking or your money back. Less postage. The plastic shroud that goes over the motor is loose. There are scratches and marks on this. I have another one of these if you're interested. Thanks for viewing. Good luck and God Loves You! Br;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13ebe0bedf5-0x104-
Snap On Tool SSDMR1A Ratcheting Stubby Screwdriver Yellow Handle Tool Exc Cond This is a Snap On Tool SSDMR1A Ratcheting Stubby Screwdriver in very lightly used condition. The reverse lever works smoothly and the ratchet is fine. My tools are aircraft quality tools in very good to excellent condition. Many of them brand new. Nothing broken, chipped or abused, unless it's indicated) I try to show any flaws in the photos and description. If you're experience with us isn't as you expected you have 14 days to return the item for a full refund unless stated otherwise. I leave feedback as soon as I know that you've recieved the item and are happy with it. Feedback is important to me. I always leave it. Expedited 1-3 day shipping. I try to ship the same day after payment at the latest. There is always a tracking number. However the ... moretracking number stops at international borders. I gladly ship overseas but can't guarantee shipping past our border. I've never had a failed shipment but delays happen out of my control. Free shipping anywhere in the USA. $23.45 shipping worldwide. Shop my store for more items. I gladly combine shipping wherever possible. Put me on your favorites list and check back for new items. Questions about an item? 253-736- 5811 Thanks. Dave Wood
One Cleco Model#8RSAPT10 Reversable Screw Gun Has( 35 in" lb-D- engraved on tool Made in USA This tool is used. But has been tested and is in great working condition. Tool pictured is the one you will receive. JUST HAS THE PAINT FADED BUT THE TOOL WORKS GOOD! I combine shipping when possible Thanks for looking. Posted with
Click thumbs to Enlarge Any additional photos will be below This Huck 2025 Rivet Gun is used and in good condition. Tested and works well. Has some light wear from normal use. Please see pictures. Pictures shown are of the actual item(s) you are bidding on. This auction includes only what you see pictured. Auction includes: Huck 2025 Rivet Gun Accessories Pictured SKU: mh1-24-171037-as Checkout: After the auction has ended please click the checkout button to proceed with your payment. Payments: Payments must be received within 3 days or we will file a non paying bidder report and the item will be relisted. Please note. If you enter the wrong billing address your card will be declined. Taxes: 7.125% Sales Tax to Minnesota buyers. All Emails and Invoices will be sent to your registered eBay Email Address. If you are not receiving our emails ... moreplease check your email spam filters. We Ship to the Continental US ONLY! Please contact us on APO/FPO Shipping. These will cost more. We no longer ship to Hawaii. We Ship to confirmed Paypal and Billing addresses Only! Shipping Carriers: UPS& USPS 1-6 Day. Local Pickups: We offer local pickups but please contact us for details. We offer a 14 Day Money Back Guarantee unless noted"As Is" We do our very best to accurately describe our items. However If you have any problems please contact us within 14 days of delivery. Operating Hours: M-F 9:30am- 5:30PM Central Standard Time Is there a Buyitnow? We do not offer Buyitnows. Will you ship to this country or this country? We ship to the US only. What is the history of the item? Most of our items are used and we do not know the history. We test them and picture their current condition. What's Included? 99% of the time If it's pictured it's included. Please also read"Auction Includes" Inkfrog terapeak. I000000. InkFrog Analytics.
Huntington Beach Machine Hand Riveter- Model HBM 122- Comes with 4 pulling heads shown- 1/8" 5/32" 3/16" RV336-3 Posted with
Unimatic 5/16" Blind Bolt Huck Nose Assy 99-823 Aircraft Auto Trucking Tools Unimatic 5/16" Blind Bolt Huck Nose Assy 99-82 Rebuilt by Wesco Tool Division
We have the BEST RETURN POLICY of any seller on Ebay. We will provide a return label for any item that qualifies for a return other than items that you change your mind about and are not sold for parts or repair or with no returns per our ebay terms and conditions. We love our customers and want you to have a good buying experience. So please contact us and let us respond first if you have any issues. Please be aware that if you choose to open a case then you will be liable for all return shipping costs. OUR NUMBERS ARE(435)674-9100 or(435)656-8500 We will return your call if you leave a voicemail. US Industrial/ Aerospace Tools 3/8" Bit RIVET SHAVER With Guide US 7337R3 This Shaver is used with a few scuffs but is damage free and in good working order. Unit comes with a compression guide only. No other accessories included. Please see ... moreour detailed pictures of this item. 10984. We do allow a 14 day return window on items that are listed with a return policy. Please allow 48 hours or a response for an item that qualifies for a return. We do not answer emails on the weekends so please allow us till Monday to respond to any return issues. Items listed for parts or repair non-working and do not function as intended and are not fully operational cannot be returned for any reason! AS-IS items marked with no returns or parts or repair cannot be returned. Items that are returned because you do not want them or ordered the wrong item will incur a 15% restocking fee.LTL FREIGHT ITEMS DO NOT QUALIFY FOR RETURNS. NO SHIPPING COSTS WILL BE REFUNDED ON THESE ITEMS. BUYER IS FULLY RESPONSIBLE FOR RETURNS AND ALL COST ON LTL FREIGHT ITEMS. Items must be returned in the original condition. Damaged items will need to be processed through the claims process. Refunds will be issued after the claims have been settled. We'll always do our best to provide as many quality pictures as bidders need. But if you do need more, do not hesitate to ask. Unless otherwise stated in the auction description. Buyer assumes full responsibili
This is a used tool that is in great shape. The cup for collecting shafts on the back of the head is missing. It did not work very well and was removed) Marson V-3 Air/Hydraulic Riveter Sets 1/8" 3/16" diameter rivets in all materials. Pulling force: 1.983 lbs. Stroke: 551" Recommended airline pressure: 85-95 PSI Weight: 3.3 lbs.
Up for auction 2 blind fastner instalation riveter kits there both incomplete but all parts are functional and in good conditional everything you seen in the pictures is included dont miss your oppurtunity to get all the main replacement parts you will ever need! Ships too U.S. only message with any questions thanks for looking! Posted with
3/16" Offset Rivet Set#6 Aircraft Surplus- Used For large bore rivet guns Length: 3-1/2" Shank: 498" Type: 10 degree offset Rivet Size: 3/16" 6 Rivet Type: AN470. Boeing BB, universal head High quality USA made rivet sets made by either ATI or Magnavon. Style may vary somewhat depending on brand. These sets are used aviation surplus. Occasionally stems may have clearance grinds but shanks and faces are in good shape. For maximum shipping savings on multiple orders. Please request an invoice for correct shipping charges before paying. See my for more rivet sets Typical Picture Quick Reference Guide to Store Categories. Click Title to go to Category{RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13ecc1b721f-0x100-
You are bidding on a KC Rotary Rivet Machine Specifications HP 1 RPM 1726 Phase 1 V 115 Good Condition Analyzing"Smart Counters" only at inkFrog inkFrog Analytics.
Welcome to Canarsky& Daughters. We are here to sell these items. We are looking forward to doing business with you. So have fun browsing and buying. Reasonable offers are always welcomed. CLICK HERE TO SEE OUR OTHER ITEMS FOR SALE ON EBAY ATTN: Please read all of our updated terms and conditions posted below before bidding. If you have difficulty with these terms. Please write us with your concern. By placing your bid. You accept these terms and agree to abide by them. THIS LOT CONSISTS OF: 1 USED SYSTEMSET MODEL RS-155 PLACEMENT TOOL. INCLUDED IS EVERYTHING YOU SEE. 3 BASE UNITS. 2 APPEAR TO BE COMPLETE. 1 MISSING SQUARE TANK. SEE PICTURE) AND 2 RIVETING GUNS, 1 APPEARS COMPLETE, 1 DOESN'T. THIS ITEM HAS NOT BEEN TESTED, BUT APPEARS TO BE COMPLETE, EXCEPT FOR HOSES, AND OPERATIONAL. MODEL RS-155 IS A PNEUMATIC-HYDRAULIC UNIT EQUIPPED ... moreWITH A BUILT-IN SPENT MANDREL COLLECTOR, A HOSE ASSEMBLY, AND A SETTING TOOL CAPABLE OF INSTALLING 1/8 INCH to 1/4 INCH DIAMETER RIVETS. WITH THE THREE TOOL MODELS AVAILABLE, THE RS-155 PROVIDES MORE VERSATILE AND SUPERIOR PERFORMANCE OVER ALL OTHER SYSTEMS OF EQUIVALENT SIZE. THE LIGHTWEIGHT TOOL DESIGN, COMBINED WITH A FLEXIBLE HOSE ASSEMBLY, ENSURES THE OPERATOR HOURS OF EFFORTLESS RIVET INSTALLATION. THIS ITEM NEEDS TO BE SHIPPED VIA FREIGHT. BUYER IS RESPONSIBLE FOR ARRANGING FREIGHT, AND NOTIFYING US WHEN PICK UP IS ARRANGED. CONDITION: USED SURPLUS. NO REASONABLE OFFER REFUSED. The approximate shipping weight is 110+ lbs. All items are sold"as is" Unless described as"new" above. Items are used. We do not have the facilities to test most of these items. You are only buying the item(s) pictured/described. AALL TECHNICAL QUESTIONS/PROBLEMS SHOULD BE ADDRESSED THROUGH EBAY CHANNELS FOR THE FASTEST POSSIBLE SERVICE. IF SENT TO OUR EMAIL ADDRESS. YOUR CORRESPONDENCE WILL GO TO THE JUNK FOLDER, AND WILL NOT GET ADDRESSED. Please note. We are not experts in these fields and so may not be able to give you the answers you require. We will, h
Alligator Squeeze Riviter Alligator Squeeze Riviter Model: IS151A-2-7/8 Serial: 12982 Rivet Capacity Steel: 1/8" Force Lbs: 5200 Reach: 2-7/8" Gap: 7/8 Engraving-Etching on Body Tested and Working Good Condition Validus Group Catalog SKU# SE1166 Photograph shows Actual item for sale Everything we sell is in our warehouse Questions Call: 260-723-4946
YOU ARE BIDDING ON 1 SEALEY S0469 HAND RIVETER USED. Drop-forged aluminium body with heavy-duty SCM4 grade jaws. Carbon steel jaw case and pin. PVC handle grips. Supplied with four rivet nozzles, to accept 2.4mm(3/32”) 3.2mm(1/8”) 4.0mm(5/32”) and 4.8mm(3/16”) rivets, and nozzle spanner. • GS/TUV Approved drop-forged aluminium body. • Heavy-duty SCM4 grade jaws. • PVC handle grips. • Supplied with four nozzles. To accept 2.4mm, 3.2mm, 4.0mm and 4.8mm rivets, and nozzle spanner. BE SURE TO CHECK OUT OUR STORE AND OTHER AUCTIONS FOR THOUSANDS OF GREAT DEALS. CUSTOMER SERVICE NUMBER- 717-896-9110. USED. E-21#6. Q-2. 7-7-10. On Nov-11-11 at 11:03:16 PST. Seller added the following information: SHIPPING: SHOWN SHIPPING COST IF FOR THE LOWER 48 US STATES ONLY. PLEASE EMAIL ME FOR A SHIPPING QUOTE TO AK. HI, US TERRITORIES, APO AND OUT OF THE COUNTRY ... moreADDRESSES. Powered by
Emhart Pop Rivit Gun Emhart Pop Rivit Gun Model: PRG510 Rivit Mandrel: 1/8" Working Air Pressure: 85psi Tested and Working Good Condition- used ValidusGroup catalog SKU# SE1307 Photograph shows Actual item for sale Everything we sell is in our warehouse Questions Call: 260-723-4946
FOR SALE IS ONE USED HUCK 99-2516 353 TYPE 1/4" NOSE ASSEMBLY. FOR: LGP LOCKBOLT PER DATA SHEET TOOL:353/225BE/226/245/246/247/2502/2503/4801 1 EXTRA SET OF GOOD USED UNITIZED JAWS(DJ) GOES WITH EACH NOSE ASSEMBLY THE HUCK 99-2516 NOSE CAN INSTALL HUCK 1/4" C6 FASTENERS USING 2C COLLARS AS USED IN CURRENT TRUCK TRAILERS AND OLDER TRUCK CABS FOR MOUNTING BODY PANELS. THIS CAN BE USED WITH THE HUCK 353.225,246,256 GUN/RIVETER OR OTHERS. TOOLS PICTURED ARE THE TOOLS FOR SALE. 100% REFUND IF YOU ARE NOT HAPPY WITH PURCHASE RETURNS: PURCHASE PRICE WILL BE RETURNED OR TOOL EXCHANGED IF CUSTOMER WISHES AS LONG AS THE TOOL IS RETURNED WITHIN 30 DAYS OF RECORDED DELIVERY DATE. SELLER CHARGES SALES TAX FOR ITEMS SHIPPED TO WASHINGTON STATE(0.090% FREE SHIPPING FOR ALL UNITED STATES BUYERS IN THE LOWER 48. THIS INCLUDES INSURANCE AND DELIVERY ... moreCONFIRMATION. WILL SEND BY USPS FIRST CLASS(2 TO 5 DAYS DELIVERY TIME) WILL SEND TOOLS WITHIN 1-2 DAYS OF CONFIRMED PAYPAL PAYMENT AND EMAIL YOU ON THE DATE TOOLS ARE SENT. WORLDWIDE SHIPPING AVAILABLE AT ADDITIONAL SHIPPING COSTS. LIABILITY: BUYER IS RESPONSIBLE FOR THE SAFE AND PROPER USE OF ITEM(S) PURCHASED FROM ME AND THE BUYER AGREES TO HOLD THE SELLER FREE OF ANY LIABILITY FOR ANY INJURY. LOSS OR DEATH RESULTING FROM THE USE OR MISUSE OF ANY ITEM(S) PURCHASED FROM ME.