|
|
Order by: Available to: eBay Affiliate Links
|
|
Engine Lathe Summit Gap Bed Model 24X80 (1999)
Summit Model 24X80 25" x 80" Gap Bed Engine Lathe(1999) Specifications and Equipment Max Swing Over Ways: 25" Max Swing Over Cross Slide: 17" Swing in Gap: 33" Distance Between Centers: 80" Spindle Bore: 4 1/8" Spindle Speeds: 21) 1250 RPM, Spindle Nose: D1-8 Camlock, Main Motor Drive: 15 HP, Equipped With: Newall 2 Axis Digital Readout System. Hardened& Ground ways, 12" 3 jaw chuck, Tool post, taper attachment, inch/metric dials, threads inch/metric, diametral, diahedral, thread dial, powered rapid traverse, coolant system, 2 speed tailstock, Steady rest, Follow rest, manuals, Machine being sold As Is. Buyer is responsible for shipping. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
|
|
|
WARNER & SWASEY 25C-M5060 CNC LATHE W/FANUC 21i-T CNC CONTROL
WARNER& SWASEY 25C-M5060 CNC LATHE W/FANUC 21i-T CNC CONTROL SPECIFCATIONS: Chuck Size: 12" Spindle Nose: 11" A1 Thru Hole in Spindle: 5" Bar Capacity: 4 1/2" Max Swing diameter over turret bar: 24 1/2" Max Swing diameter over turret face: 16 1/2" Longitudinal Work Area: 26 1/2" Tooling OD Cutter(qualified) 1 1/4" sq x 6" Bore in ID Holder: 3" Turret with Coolant Distributor: 12 stations Longitudinal Stroke: 12" Cross Stroke: 8 3/4" Max Motion Rate: 01 to 300 IPM Motor-Heavy Duty DC Variable Speed Standard: 50 HP Spindle Speeds: 35- 1518 RPM High Clutch Spindle Speed Range: 100-1518 RPM Low Clutch Spindle Speed Range: 35- 519 RPM Floor Space(approx) With Cabinet Doors Open: 222" x 113" Shipping weight(approx) 17.000 lbs Equiped with: Coolant Pump. Work Area Enclosure, ... more5 Plain Heads, 7 Turning Heads, Chip Conveyor, Tailstock, Work Light and a Fanc 21it cnc control. Machine was refurbished and retrofitted with Fanuc Control 21i-t. With Fanuc motors, drives and chuck in 2007 by previous owner. Gardner Denver Compressor, in Quincy, MO power on- 21.883 hrs cut time- 4.398 hrs operator time- 1.924 hrs ALL ITEMS SOLD AS IS. WHERE IS stock# 053 MACHINE IS AVAILABLE FOR INSPECTION UNDER POWER BY APPOINTMENT BUYER IS RESPONSIBLE FOR ALL SHIPPING ARRANGEMENTS AND COST. LINK TO VIEW MACHINE RUNNING:
|
|
|
Harrison M750 30" - 41" x 13' Removable Gap Bed Lathe 10 - 800 RPM 6" Thru Hole
Harrison M750 Removable Gap Bed 30" 41" x 13' Model M750. S# LB0072, Date Mfg. 2002, 30" Swing(41" in 14.75" removable gap) 20-3/8" Swing over cross slide, 13' 1" Between centers, 24 Spindle speeds from 10 to 800 rpm, 6.5" Thru hole. 27.5" 4 Jaw chuck, Inch/Metric threading, X/Y DRO(not installed yet) Controls on carriage, Rapid traverse, No.6 morse taper on tailstock, Coolant, 2 Roller bearing steady rests with 19" 13" Thru holes, Aloris 2 way tool post w/ 7 holders, Tool box w/ Misc. tools/wrenches, 1 Live center& 2 dead centers, 3 Change gears, Steel leveling pads, Rear splash guards, Slide out chip catch pans, Operation& parts manuals& electric prints, 25hp 480v 3ph 60hz, Overall Dim. 19' 7"L x 4' 7"W x 5' 7"H, Est. Wt. 12,000 lbs. Shipping: ... moreThe buyer is responsible for all shipping& handling costs. Contact us for a shipping quote. We'll do our best to get you the lowest rate possible. We also allow local pick-up here at our facility in Hugo. MN 55038. We can load at no extra cost. Return Policy: We offer a 30 day return policy on all of our machines unless otherwise stated. Return shipping to be paid by the buyer. Item must be returned within 30 days of receiving the item. Payment: We accept PayPal. Credit cards(thru PayPal) Cashier's checks& Business checks. We will not ship the item until payment has been received& cleared. Buyers: We will not leave feedback for buyers until feedback has been received. Should you have any issues with your item please contact us before leaving neutral or negative feedback so we can resolve any problems. Additional Information: We test every machine to make sure it is fully functional before we ship it out. Also machines can be inspected under power here at our facility. Contact us to schedule an appointment. Thank You!
|
|
|
ZL-15S MORI-SEIKI 4-AXIS CNC TURNING CENTER - #25619
QUOTE#25619. ZL-15S MORI-SEIKI 4-AXIS CNC TURNING CENTER New 1994. Serial No 427, Model ZL-15S EQUIPPED WITH: Mori-Seiki MF-D6 CNC Control FMB Turbo 5-42 Bar Feed Collet Chuck on Main& Sub Spindle 12-Position Upper Turret 6-Position Lower Turret Parts Catcher- Chip Conveyor CATALOG SPECIFICATIONS: Bar Capacity. Round. 1.6" Spindle Bore. 2.05" Swing Over Bed. Maximum. 18.9" Swing Over Cross Slide. 14.6" Turning Diameter. Maximum. 9.06" Turning Length. Maximum. 3.94" Distance Between Spindle Noses. 23.4" Rapid Traverse Rate. X-Axis. 472 IPM. Rapid Traverse Rate. Z-Axis. 590 IPM. Spindle Speeds. Main Spindle. 50-5000 RPM. Spindle Speeds. Sub Spindle. 60-5000 RPM. Main Spindle Drive Motor. Horsepower. 10/7.5 HP. Subspindle Drive Motor. Horsepower. 7.5/5 HP. Floor Space Required. W x D. 198" x 109" ... moreOverall Height. 79" Weight Approximately. 12.276 LBS. PRICE: F.O.B. OUR WAREHOUSE. $59.500.00. Machinery/Equipment Subject to Prior Sale.
|
|
|
V200 INDEX CNC VERTICAL TURNING LATHE - #22880
QUOTE# 22880. V200 INDEX CNC VERTICAL TURNING LATHE New 1997. Serial No V200100299, Model V200, EQUIPPED WITH: Index#C200-4 CNC Control w/10" Monitor(14) Station Tool Turret w/Tooling Vertical Thermosymmetric Headstock Hydraulic Solid Chuck Actuator 5.12" Chuck- Variable Speed AC Drive Through Spindle Coolant CATALOGUE SPECIFICATIONS: Swing Diameter. Maximum. 16.54" 420MM. Turning Length. 7.87" 200MM. Compound Slide X-Axis Travel. 20.47" 520MM. Compound Slide Z-Axis Travel. 7.87" 200MM. Spindle Through Capacity. 2.3" 60MM. Spindle Speed Range. 0 to 5000 RPM. Compound Slide Feed Force. 1124LBS 5000N. Compound Slide Rapid Traverse. 1181 IPM 30 MPM. Chuck Actuating Stroke. 1.26" 32MM. Spindle Horsepower@ 100% 27 HP 20 KW. Spindle Horsepower@ 40% 39 HP 29 KW. Floor Space Required. L x W. 6'11" ... morex 6'3" Weight Approximately. 7300 LBS. NOTE: This Machine Appears To Be In Very Good Condition With A Replacement Price Of Over $230.000.00 PRICE: F.O.B. OUR WAREHOUSE. $29.500.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
|
|
|
EMCO-MAIER EMCOTURN 465MC TWIN-SPINDLE 6-AXIS CNC TURNING CENTER - #24620
QUOTE# 24620. EMCO-MAIER EMCOTURN 465MC TWIN-SPINDLE 6-AXIS CNC TURNING CENTER New 1999. Serial No. R4B-A03-M1003 EQUIPPED WITH: Siemens 840D 6-Axis CNC Control(2) 12-Position Turrets w/ Live Milling All Stations 7" 3-Jaw Chuck On LH Spindle. Collet Chuck On RH Tool Presetter For Both Turrets- C Axis Left& Right Sub Spindles- Coolant System- Chip Conveyor Automatic Gantry Loading System CATALOGUE SPECIFICATIONS: Maximum Diameter Bar Stock. 2.56" Swing Over Bed. Maximum. 14.5" Turning Length. 7.4" Spindle Nose. A-6. Cross Travel(X-Axis) 9.5" Longitudinal Travel(Z-Axis) 7.4" Longitudinal Travel RH Spindle(Z2-Axis) 26.77" Turret Index Time. 0.1 Second. Toolholder. VDI 30. Main Spindle Speeds. Range. 0-4000 RPM. Live Tool Spindle Speeds. Range. 0-4000 RPM. Left Spindle Drive. Horsepower. 20 HP. Right Spindle ... moreDrive. Horsepower. 15 HP. Live Tool Drive Motor. Horsepower. 7.5 HP. Electrical System. 440/3/60. PRICE: F.O.B. OUR WAREHOUSE. $69.500.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
|
|
|
EMCO-MAIER EMCOTURN 465DS TWIN-SPINDLE 6-AXIS CNC TURNING CENTER - #24621
QUOTE# 24621. EMCO-MAIER EMCOTURN 465DS TWIN-SPINDLE 6-AXIS CNC TURNING CENTER New 1999. Serial No. R4B-V01-M37004 EQUIPPED WITH: Siemens 840D 6-Axis CNC Control(2) 12-Position Turrets w/ Live Milling All Stations 7" 3-Jaw Chuck On LH Spindle. Collet Chuck On RH Tool Presetter For Both Turrets- C Axis Left& Right Sub Spindles- Coolant System- Chip Conveyor Automatic Gantry Loading System CATALOGUE SPECIFICATIONS: Maximum Diameter Bar Stock. 2.56" Swing Over Bed. Maximum. 14.5" Turning Length. 7.4" Spindle Nose. A-6. Cross Travel(X-Axis) 9.5" Longitudinal Travel(Z-Axis) 7.4" Longitudinal Travel RH Spindle(Z2-Axis) 26.77" Turret Index Time. 0.1 Second. Toolholder. VDI 30. Main Spindle Speeds. Range. 0-4000 RPM. Live Tool Spindle Speeds. Range. 0-4000 RPM. Left Spindle Drive. Horsepower. 20 HP. Right Spindle ... moreDrive. Horsepower. 15 HP. Live Tool Drive Motor. Horsepower. 7.5 HP. Electrical System. 440/3/60. PRICE: F.O.B. OUR WAREHOUSE. $69.500.00. Machinery/Equipment Subject to Prior Sale.
|
|
|
HARDINGE COBRA 42 2-AXIS CNC LATHE - #25618
Quote# 25618. HARDINGE COBRA 42 2-AXIS CNC LATHE New 1996. Serial No. C-265-T, MODEL COBRA 42 EQUIPPED WITH: Fanuc#21TB CNC Control w/CRT Tailstock Collet Chuck- 12-Position Turret 10 HP Spindle Drive Motor Chip Conveyor CATALOGUE SPECIFICATIONS: Bar Capacity. 1.625" Maximum Turning Length. 14" Maximum Turning Diameter. 8.25" Spindle Nose. A2-5" Maximum X-Axis Travel. 17.7" Max. X-Axis Traverse Rate. 400 IPM. Longitudinal Travel(Z-Axis) 14" Max. Z-Axis Traverse Rate. 630 IPM. Spindle Speeds. to 5000 RPM. Spindle Motor. 10 HP. PRICE: F.O.B. OUR WAREHOUSE. $17.500.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
|
|
|
42"/52" x 240" (20') HERCULES GAP-TYPE ENGINE LATHE W/TAPER ATTACHMENT - #26800
Quote#26800 42"52" x 240" 20' HERCULES GAP-TYPE ENGINE LATHE New 1965. Serial No 65116, EQUIPPED WITH: Trionics"Pro-Max" Digital Readouts Taper Attachment Threading(Inch-Metric Full-Length Lead Screw) 39" 4-Jaw Chuck w/Jaws- 4-Way Tool Post(2) 27 1/2" Steady Rests- 1) Follow Rest Hardened& Ground Bedways- ASA B-11 Spindle Nose Power Rapid Traverse To Carriage CATALOGUE SPECIFICATIONS: Hole Thru Spindle. 6.19" Swing Over Bed Ways. Rated. 40" Swing Over Bed Ways. Actual. 42 Swing thru Gap. 52" Swing Over Cross-Slide. 28.25" Distance Between Centers. 240" 20' Tailstock. Spindle Taper. 6 MT Tailstock. Quill Diameter. 6.5" Spindle Speeds. Range. 6 to 800 RPM Carriage Longitudinal Feeds. 001 to.200 IPR(99) Thread Changes. American. 1/2 to 84 TPI(63) Thread Changes. Metric. ... more5 to 56 PRICE: F.O.B. OUR WAREHOUSE. $59.500.00 Machine/Equipment Subject to Prior Sale. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13e8fdf9a38-0x102-
|
|
|
PUMA CNC LATHE HAAS MAZAK MORI SEIKI MAKINO OKUMA HARDINGE TOOL PRE-SETTER
PUMA CNC LATHE TOOL PRESETTING PROBE GUARANTEED NOT DOA REMOVED FROM A PUMA CNC LATHE ORIENTAL MOTOR 4TK10GN-A TORQUE MOTOR Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Herbert Senior #4 Turret Lathe, w/bar feeder, extra chuck & collets
This Herbert Senior#4 Lathe comes with a long bar feeder(will take 12' long stock) A lot of tooling collects, and an extra chuck. It is currently working and was under power until April 30, 2013. It has been checked out by a machine mechanic and is in great working order and condition. Requires 3 phase power. Our shop has moved and this machine is no longer needed. Buyer is responsible for removal and shipping from Bainbridge Island WA 98110
|
|
|
INDEX ABC CNC LATHE-SUB SPINDLE-2 TURRETS-LIVE TOOLING-BAR FEED-
INDEX ABC CNC LATHE TURNING CENTER- 51mm(2 inch) BAR CAPACITY SUB SPINDLE with LIVE TOOLS WATCH MACHINE ON YOUTUBE.COM CLICK LINK BELOW SIEMENS CONTROL 8 STATION UPPER TURRET- 6 STATION LOWER PART CATCHER CHIP CONVEYOR 12 ft. auto loading bar feed All tool holders shown in pictures and video included. instruction manual- electrical manual included RIGGING& SHIPPING ARE THE RESPONSIBILITY OF THE BUYER! Call CNC Digital for more info. 440-263-1878 SUBJECT TO LOCAL SALE. A $500 DEPOSIT IS DUE IMMEDIATELY THRU PAYPAL. BALANCE DUE WITHIN 3 BUSINESS DAYS. ALL CHECKS MUST CLEAR BEFORE MACHINE RELEASE. WIRE TRANSFER PREFFERED. Terms& Conditions of Sale: ACCEPTANCE: Purchasing equipment from CNC Digital. Inc. the buyer agrees to all the terms and conditions listed and any other terms expressly added to this invoice. PRICE: All Prices are in ... moreU.S. Currency(Dollars) Prices are exclusive of state. County or federal taxes. Buyer is responsible for any applicable taxes. SHIPPING: BUYER IS RESPONSIBLE FOR LOADING(RIGGING) AND TRANSPORTATION from F.O.B. point. CNC Digital. Inc. is not responsible for any damage due to weather, rigging, trucking, or any damage involved in transport, loading, unloading or situations beyond CNC Digital, Inc. control. ACCEPTANCE: All Sales are made with the understanding that orders are not subject to cancellation. And that a Payment in Full is REQUIRED prior to machine release. NO WARRANTY: The goods described are pre-owned used goods and are offered"As Is" where is" Seller makes no warranties or guarantees of any kind, either expressed or implied, of merchantability, and fitness for a particular purpose. All specifications, descriptions of equipment should be used as a guide only. It is the buyers responsibility to inspect item(s) and details of machine capabilities prior to bidding or purchase. CNC Digital, Inc. reserves the right to correct any typographical errors. INDEMNIFICATION: Seller does not warrant that the used equipment complies with O.S.H.A. safety standards. Buy
|
|
|
TSUGAMI #T-SPL SUPER PRECISION HIGH SPEED CHUCKER LATHE
aims TSUGAMI#T-SPL SUPER PRECISION HIGH SPEED CHUCKER LATHE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in Japan by Tsugami Mfg. Co. This is a used Super Precision High Speed Chucker Lathe in GREAT condition. Model# T-SPL Serial# 3254 This Machine is a Super Precision Turret Chucking Lathe capable for turning. Facing, boring as well as precision threading at one chucking. In contrary to the ram type turret lathe, the turret head of this lathe is also capable ... moreof cross sliding and it can be used for almost all machining by standard tools with very quick setup. Features: Super Precision High-Speed Spindle: The main spindle is of a special construction using preloaded ultra super precision ball bearings; it requires no bearing adjustment nor lubricant. Even at 3.000 rpm, bearing temperature rise is quite negligible and the machine can be operated continuously without loss in accuracy. High Precision Operation by the Increments and the Rotary Stopper: The turret handle is very easily operated and the lead screw is high precision. For instance. Set a reading on the scale of the handle, and all the following parts can be machined continuously by the reading; no measuring tools are required. This is also true in the longitudinal cut by power feed; precision can be maintained by the rotary stopper. 8-Station Turret Head: The 8-Station Turret Head with cross sliding ability is held by preloaded roller bearings to provide the rigidity. Power Feed for Turret: A D.C. motor in the turret carriage feeds both longitudinal and cross feeds. The feed speeds can be steplessly changed in a wide range by a feed dial on the control box on the righ
|
|
|
HES MACHINE TOOL CO 12"x24" HYDRAULIC TRACER LATHE
HES MACHINE TOOL CO 12"x24" HYDRAULIC TRACER LATHE HES MACHINE TOOL CO 12"x24" HYDRAULIC TRACER LATHE SERIAL NO: 6588 TYPE: ACC 300 SERIAL NO: 6588 SPINDLE SPEEDS: 55- 2.500 RPM FEEDS: 0047- 023 DATE: 132 67 3 MORSE TAPER TAIL STOCK SIZE MADE IN FRANCE 6-1/4" CHUCK diameter 5" SWING OVER SADDLE 1-5/8" THROUGH HOLE OVERALL MEASUREMENTS: 71" x 36" x 52" TALL APPROXIMATE WEIGHT: 1.500 LBS LOADING FEE: $20 WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer ... moreService Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from
|
|
|
Hardinge HLV-H 11" x 18" Precision Tool Room Lathe w/ Tool Post & Holders, Guard
HARDINGE HLV-H PRECISION TOOL ROOM LATHE 11” SWING X 18” BETWEEN CENTERS Description: Up for sale is a Hardinge HLV-H Precision Tool Room Lathe. This lathe is in good working and operating condition. It features an 11” swing over the bed. 9” swing over the carriage, 18” between centers, and a spindle RPM range of 125RPM to 3000RPM. It comes equipped with the tailstock, coolant system, collect closure, back splash guard, and an Aloris tool post with tool holders. This machine requires 3 phase 208V of power SPECIFICATIONS MANUFACTURER HARDINGE MODEL HLV-H SERIAL HLV-H-9559-T YEAR 1981 SWING OVER BED 11” SWIG OVER CARRIAGE 9” SWING OVER CROSS SLIDE 6” BETWEEN CENTERS 18” SPINDLE HOLE 1.25” SPINDLE RPM 125-3000RPM MAIN MOTOR 1.5HP LONGITUDINAL VARIABLE FEED RATES 5/16 TO 7 IPM CROSS FEED VARIABLE FEED RATES 3/16 TO 4 IPM INCH THREADS 11-108 TPI ... morePOWER REQ 3 PHASE/ 208V APPROX WEIGHT 2700LBS FOR MORE INFORMATION PLEASE CALL GARY AT(510) 453-0513 FOR MORE INFORMATION PLEASE CALL GARY ARAGON AT 510 453-0513 LOCATED AT 601 ALADDIN AVENUE. SAN LEANDRO. CALIFORNIA 94577* TERMS AND CONDITIONS* SALES Your bid is a contract. Place a bid only if you are serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within three days of the end of the auction, or if payment isn’t received within three days of the invoice date, item may be offered to the next highest bidder or re-listed at the sellers’ discretion. Please do NOT pay until you are invoiced! PAYMENT TERMS Gary S. Aragon. LLC accepts ATM and these major credit cards: Visa, MasterCard, Discover. Buyers may call us at 510 453-0513 with credit card information. You can also use PayPal. PayPal payments should be sent to garysaragon@comcast.net. CALIFORNIA STATE SALES TAX APPLIES TO ALL STATE RESIDENTS… unless we receive a valid resale card. EBAY TERMS eBay charges Gary S. Aragon. LLC a service charge for each
|
|
|
2004 HAAS SL-20 CNC LATHE w/ PROGRAMMABLE TAILSTOCK SL-20T Turning Center
ebay template SL- 20T 2004 Tailstock CNC Turning Lathe I TEM S OLD A S P ICTURED PACO NOT INCLUDED The SL-Series Haas CNC Lathes offer a wide range of turning options and capacities. The SL-20 is considered to be Haas’ versatile lathe with plenty of power to do YOUR job! This beautiful Haas CNC Lathe is in good condition. Take a look at the pictures below to see this spectacular machine! Full demonstrations available! Come into our fully powered showroom and see this BEAUTIFUL Haas CNC Lathe at a BEAUTIFUL PRICE! Affordable and reasonable! Buy through us Machinery Exchange Inc. A trusted& conscientious MDNA dealer, get assurance and peace of mind with your money-saving investment! INCLUDES 8” Chuck Coolant/Chip Pan Assembly Tooling/Holders As pictured FEATURES Made entirely in The U.S.A. Fully Programmable Hydraulic Tailstock 10-Position ... moreAutomatic Turret with VDI Type Turret Configuration 50 to 3.400-RPM High Torque Spindle Driven by a 15/20 HP Intermittent Duty Spindle Motor Chip Auger Automatic Lubrication System Dual RS-232 Ports One Button Power-up User Friendly Haas Control Graphic Tool-Path Verification Double Anchored Ballscrews for 100% Parallelism Heavy-Duty Sheet metal Enclosure ISO Standard G-Code Programming Fast and Powerful Fanuc Compatible 32-Bit CNC Control SPECIFICATIONS SWING DIAMETER S.A.E. Metric Over Front Apron 23.0" 584 mm Over Cross Slide 9.5" 241 mm CAPACITIES S.A.E. Metric Chuck Size 8.3" 210 mm Max Cutting Diameter 10.3" 262 mm Max Cutting Length 20.0" 508 mm Max Cutting Length w/Std Workholding 19.0" 483 mm Bar Capacity 2.0" 51 mm Between Centers 24.0" 610 mm TRAVELS& FEEDRATES S.A.E. Metric X Axis 8.45" 214.6 mm Z Axis 20.00" 508.0 mm Rapids on X 1200 in/min 30.5 m/min Rapids on Z 1200 in/min 30.5 m/min Max Thrust X 2400 lb 10676 N Max Thrust Z 3700 lb 16458 N SPINDLE S.A.E. Metric Spindle Nose A2-6 A2-6 Max Rating 20 hp 14.9 kW Max Speed 4000 rpm 4000 rpm Max Torque 154 ft-lb@ 650 rpm 209 Nm@ 650 rpm Spindle Bore ø 3.00&q
|
|
|
Sebastian Lathe 16 x 54 / geared head lathe
Manufacturer: Sebastian/ King Machine Tool Division. Cincinnati. OH. Model: 16 X 54 with taper attachment. TYPE: ENGINE SWING OVER BED: 16" DISTANCE BETWEEN CENTERS: 54" HIGHEST SPINDLE SPEED: 487 HOLE THRU SPINDLE: 1-1/2" 8" DIAMETER 3 JAW CHUCK WIRED FOR 480 VOLTS 3PHASE LATHE RUNS AND FUNCTIONS MACHINE COULD BE SHIPPED. CUSTOMER WOULD BE RESPONSIBLE FOR SHIPPING METHOD. CHECK WITH US FOR LOCAL DELIVERY OPTIONS.
|
|
|
Miyano BNC-34S CNC Lathe, 1990
Miyano BNC-34S CNC lathe. Serial#BN30550S. Buy it now $17.500.00! Mfd. 1990. GE Fanuc OT. With subspindle. Single turret. LNS hydrobar bar feed Type 6.35HS-4.8. 33364. Watch the Miyano run! For more information contact Jim at. Phone: 708-217-2476 Fax: 847-400-0790 or iphone facetime Skype name: jimgraff We sell worldwide. Buyer pays loading and shipping. Machines and Tooling must be paid for. Shipped and/or picked up within 7 days of winning bid. We accept payment by wire transfer or company check only. While we sell machines worldwide. Graff Machine Tools is not a shipper or rigger. Please ask your rigger or shipper for an estimate of loading, shipping cost and time. If you do not have a rigger or shipper, we will suggest several companies you can contact.
|
|
|
Kenametal 1.0" x 1/2" Shank Lathe Insert Tool B32120
Kenametal 1.0" x 1/2" Shank Lathe Insert Tool B32120 1 New Insert Excellent Condition Questions? Call Robert at 607-259-5615 NU1-D4-R7
|
|
|
UNION MANUF CON "New Britain Conn 3 jaw chuck"
3-Jaw Chuck 15" D1-8 Cam lock chuck New Britain Conn jaw chuck
|
|
|
1996!! FEMCO DURGA-25E CNC TURNING CENTER w/ FANUC O-M CONTROL + CHIP CONVEYOR
aims 1996! FEMCO DURGA-25E CNC TURNING CENTER w/ FANUC O-M CONTROL + CHIP CONVEYOR read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made by Femco Inc. This is a used CNC Turning Center in GREAT condition. Model# DURGA-25E Serial# L5E880 Date of Manufacture: 01/1996 Retails for over $70.000.00! Photos were taken on location. But machine will ship from our Irwindale, CA warehouse. Features: Turret- The turret is a proven and mature twin disk design with an exclusive ... moreFEMCO patent. The turret holds 12 OD tools on the front disk and 11 ID tools on the rear disk. Bi-directional. With automatic selection of the shortest route. Index time is a quick 1 second to the nearest tool and 1.8 seconds to the farthest tool. Bed and Saddle- The bed is a one piece casting of close grain meehanite cast iron. The ribbing locations and wall thickness are placed in strategic locations determined by computer finite element analysis. This design assures consistent accuracies and excellent finishes. The saddle has a 30 degree incline. Directing chips and coolant to the chip conveyor. Spindle and Headstock- The headstock is a precisoin machined close grain meeganite casting assuring precise alignment of the critical spindle bores. The pindle rotates on six precisoin class P4(AFBMA B7) bearings and are permanently grease lubricated. The large 2.4" spindle provides for a 2.04" bar working diameter. Spindle and Drive- The high torque 20 Horsepower Fanuc spindle motor gives the power for heavy stock removal and minimizes the number of roughing cuts taken. The powerful A.C. digital spindle drive system gives fast spindle acceleration and excellent low end tor
|
|
|
USED AXELSON ENGINE LATHE
USED AXELSON ENGINE LATHE MODEL: 25” X 144” S/N 2904 SWING: 28 ¾” CENTERS: 144” SPINDEL BORE: 2 ½’ SPINDLE: D1-11 RPM: 6-555 12 SPEEDS MAIN MOTOR: 20 HP 220/ 440 VOLTS 3 PHASE THREADING: 1-30 TPI TAPER ATTACHMENT 18” 3-JAW CHUCK 24” 4-JAW CHUCK STEADY REST(8” Steady REST(15” COOLANT PUMP 2-SPEED TAILSTOCK#5MT TRAV-A-DIAL APPROX WEIGHT: 23.000 LBS MACHINE IN GOOD WORKING CONDITION BUYER IS RESPONSIBLE FOR ALL TRANSPORTATION CHARGES. WE WILL LOAD MACHINE ON LINE TRUCK AT NO ADDITIONAL CHARGE. This item is being sold“As Is” and with No Warranty. Express or implied. Buyer assumes all risks of operation or transporting this item and will not hold Emrick Machinery Sales Inc responsible for and injuries or damages. All goods and services are provided“AS IS” and with No Warranty. Express or implied. The Seller(Emrick Machinery Sales Inc. ... moreand their respective affiliates, officers, directors, employees and contractors specifically disclaim all items are sold“As Is, Where Is” No Warranties. These are used goods. No complete thorough inspection has been undertaken. The buyer takes the entire risk as to the quality and performance of the goods. And you assume the cost of any and all necessary servicing or repairs, should the goods prove defective or not to your liking after purchase. 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-13ea6bea52e-0x102-
|
|
|
Bullard 46 Dynatrol High Cloumn Vertical Lathe with Side Head 46" Table
1) USED BULLARD 46” DYNATROL VERTICAL TURRET LATHE(1966) with Octagon Turret Index and Side Head(Removed from Service in Good Working Condition) Specifications: Table Diameter: 46” Maximum Swing: 59-1/2” Maximum Height Under Rail: 67” Vertical Travel of Turret Head: 31” Vertical Travel of Cross Rail: 51” Turret Slide Tilt: L-R 30 deg. 2-Axis Feed Simultaneous Rapid Traverse Feeds(variable) 001- 250 IPR Main Drive(variable speeds) 50 HP High Range: 0– 400 rpm Low Range: 0– 200 rpm Turret Head Tool Size: 3-3/8” Diameter Approximate Weight: 47.000 lbs. Approximate Dimensions: 132” L x 120” D x 144” H Equipped With: 4-Jaw Independent Chuck Hard Jaws 5-Position Turret with Power Index Hardened Ways Digital Readout Misc. Tool Holders Misc. Boring Bars Special Offered Price: $ 55.000. Sincerely, McMurphy111
|
|
|
Engine Lathe Gap Bed 30" x 80" Giana Model 3280
30" x 80" Giana Model 3280 Gap Bed Engine Lathe Specifications Swing Over Gap: 30" Swing Over Bed: 25.5" Gap Length: 12" Distance Between Centers: 80" Swing Over Cross Slide: 16.5" Spindle Bore: 3" Spindle speeds: 4- 1280 RPM, Equipped With: 20" 3-Jaw Chuck. 20" 4-Jaw Chuck, Steady Rest, Follow Rest(Available) Inch/Metric Threads(5"30" IPR/1.124mm-60mm Per Rev) Power Rapid Traverse, Coolant Pump& Piping, Tailstock, Enco Model E4 Quick Change Toolpost, Shot Lube System, Additional Tool Holders, Machine sold As Is. Buyer is responsible for shipping. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
|
|
|
MAZAK QT15 QUICK TURN Mazatrol T-2 CNC Lathe
` QUALITY NEW AND USED CNC AND MANUAL MACHINERY INCLUDING MILLS AND LATHES. CENTROID, ANILAM, FANUC, CHECK US OUT FOR TOOLS AND SUPPLIES CHARNEY MACHINE& TOOL. INC 160 84th STREET SW BYRON CENTER. MI 49315 616-455-3800 Mazak QT-15 CNC Lathe Quckturn Mazatrol T-2 CNC Control Our Stock Number 1238-020113 Machine Description Mazak QT 15 CNC Lathe w/T-2 CNC Control Year: 1987 Specifications: are accurate to the best of our knowledge) Max Swing. 17.32" Max Turning Dia. 11.81" Max Turning Length. 19.69" Bar Capacity. 2. Spindle Bore. 2.44" Spindle Nose. A2-6 X-Axis Travel. 7.09" Z-Axis Travel. 20.08" Spindle Motor. 20 HP Spindle Speeds. 4.500 RPM Turret Stations. 8 Equipped With: Mazatrol T-2 Control Color Monitor Programmable Tailstock 8” Chuck Tool Presetter Chip Conveyor Approximate Overall Dimensions: 98" ... moreL-R x 60" F-B x 80" H(Does not include bar feed) Approximate Weight: 10.000 Lbs. Tooling pictured not included This machine is in good working order. You may inspect under power. in Byron Center. MI 49315 Any questions pleas
|
|
|
2005 Okuma MCV 4020 MCV4020 CNC Machining Center 4th Axis Ready Low Hours
OKUMA MODEL MC-V4020 VMC 2004/05 Machine In Superb Condition Less The n 6.000 Hours EQUIPPED WITH: OSP-E100M CNC 15.000 RPM Spindle 32 Position ATC 1000 PSI Thru Spindle Coolant 4th Axis Wired High Column Option Chip Conveyor Transformer All Available Manuals SPECIFICATIONS: Machine Travels 40.0" x 20.0" x 17.7" Table Size 48" x 20" Load Capacity 1.540 Lbs Spindle Taper CAT-40 Rapid Traverse(X/ Y) 1,417 IPM Rapid Traverse(Z) 1,187 IPM Main Spindle Motor 15 HP Spindle Speeds 15,000 RPM Tool Magazine Capacity 32/ Side-Mount Machine Weight: 13,750 Lbs Machine Size 130 x108 x 105 INSPECT UNDER POWER IN Philadelphia PRICE: $ 79.5 8 0.00“ AS INSPECTED ON LOCATION” IN PA For Inspection or More Info Please Call Maury Cohn 1 800 888 4312
|
|
|
1996 HYUNDAI HiT-18s CNC LATHE
Im selling our 1996 Hyundai HIT 18s lathe with an 8 station turret. We do very little lathe work in our facility and need to move this out to make room for another mill. Weve owned the machine for about 2 years and In that time I only ran it a few times. It has a less than 3 year old 10" 3 jaw chuck. A tailstock and a conveyor. With me having ZERO Seimens control experience and not having a good manual to go by its been easier to knock the few parts we do get out on a manual lathe than it would be to set this thing up. Im listing it in NON working condition because when I started it up to take the picures Im getting a servo alarm for the spindle(see picture of alarm number on screen) Im not sure whats causing it. For those of you who know these machines it could be an easy fix. Overall the machine is in good condition and holds tolerance. ... moreSince buying machines and shipping is usually a headache I will help out by covering the rigging cost at MY FACILITY ONLY. One less thing youll have to worry about. Please contact for any questions. Thanks!
|
|
|
Centre POINT 2 piece 9 to 10cm
We have several hundred engineering items for sale. They came from a local company which has gone into liquidation. Most if not all the items were being used up until January this year. Please view our other listings and save on postage We prefer PAY PAL- please pay within 48 hours- ALTERNATIVELY postal order- no cheques- they take too long Delivery normally within 5 working days. WE HAVE NO FACILITIES FOR COLLECTION If you have less than 5 feedbacks please contact us before bidding. Other wise your bid might be blocked automatically If you have any concerns about this item after purchase please mail us before leaving feedback so that we can resolve it. Thanks. COMBINED POSTAGE- SECOND AND SUBSEQUENT ITEMS ARE CHARGED AT 50% STATED POSTAGE RATE- AFTER THE MOST EXPENSIVE POSTAGE RATE- WHERE IT IS POSSIBLE TO COMBINE ITEMS Please note P&P ... morecharges reflect not only postage but packing materails. Time to pack and take to post office or courier. All items are insured to cover loss or damage- some sellers will charge you extra for this. Courier charge for mainland England- other areas please ask! Powered by
|
|
|
Rivett 918 Bench/Metal Lathe
Rivett plain lathe. 9" swing 18" between centers. Made in Feb. 1945. 230 VOLTS THREE PHASE. Runs good. Has a set of 5C collets, some tooling. We have it connected to power so you may see it run. Selling as is. No returns. Pick up only.
|
|
|
Book. Woodworking. Lathe Devices. Their Construction & Use. 1st 1947 HB.
DETAILS OF ITEM Book Title. Lathe Devices– Their Construction and Use Author/Editor. Ian Bradley and Norman F. Hallows Publisher. Chapman and Hall Publishing Date. 1947 Edition. 1 st Hard Cover/Soft Cover. Hard with d/j Pages. 183 Condition. Book in fair condition– used/handled and with expected general wear/discolouring for age. Light creasing throughout and some gathering around spine. Light foxing to first/last couple of pages and boards starting to curl away from book– faint musty smell. D/j worn/rubbed and with creasing throughout. Some nicks/tears to edges– scuffed areas on back. Despite obvious use and showing signs of age. Pages and text clean and overall condition still acceptable and perfectly useable. Description of Contents. Chapters include- some lathe improvements and additions; traversing in the lathe; surfacing in the lathe; ... morechuck work; boring– taper turning; dividing in the lathe; knurling. Filing, shaping, slotting, spherical turning; milling in the lathe; gear cutting in the lathe; grinding, reaming, lapping; drilling in the lathe; repetition work; tool forms and sharpening methods– drill grinding. Scarce title. Photography. B/W drawings Free UK P&P– Overseas P&P £7.50 ABOUT US We specialise in out of print& secondhand football and motoring/motorsport books. Please browse our shop and add us to your favourites as we are constantly adding new titles. www.stores.ebay.co.uk/elmo-books PAYMENT METHODS For payment we accept the following; Personal cheques drawn on a UK bank. UK Postal orders. PayPal. Payment over the telephone using a credit or debit card. We are sorry but we do not accept the following forms of payment: Cash in any currency· Personal cheques in US Dollars or any other currency other than Sterling. Personal cheques that are in Sterling but that are drawn on a bank from outside of the UK. FEEDBACK Re: Feedback. Please note that we try to give all of our customers the same level of service. If you have any problems please contact us before leaving negative f
|
|
|
LeBlond Regal 25" - 50" x 9' 8.5" - 15' 5" Sliding Gap Bed Lathe
LeBlond Regal Sliding Gap Bed 25" 50" x 9' 8.5" 15' 5" S# 5H434. 25" Swing, 50" Swing in gap. Sliding Gap Bed, 9' 8.5" Bed length, 15' 5" Open, 12 Spindle speeds from 18 to 720 rpm, 48 Threading ranges from 2 to 112, 2 1/8" Thru hole. 12" 3 Jaw Cushman chuck, 30" Face plate, 2 axis Anilam Wizard Lathe Series DRO, Taper attachment, Quick change tool post, Hydraulic Hydra-Trace compound, 2 Roller bearing steady rest- 12.5" thru hole& 7.25" thru hole, 10hp 230/460v 3ph 60cyc, Cleaned& painted Video- Shipping: The buyer is responsible for all shipping& handling costs. Contact us for a shipping quote. We'll do our best to get you the lowest rate possible. We also allow local pick-up here at our facility in Hugo. MN 55038. We can load at no extra cost. ... moreReturn Policy: We offer a 30 day return policy on all of our machines unless otherwise stated. Return shipping to be paid by the buyer. Item must be returned within 30 days of receiving the item. Payment: We accept PayPal. Credit cards(thru PayPal) Cashier's checks& Business checks. We will not ship the item until payment has been received& cleared. Buyers: We will not leave feedback for buyers until feedback has been received. Should you have any issues with your item please contact us before leaving neutral or negative feedback so we can resolve any problems. Additional Information: We test every machine to make sure it is fully functional before we ship it out. Also machines can be inspected under power here at our facility. Contact us to schedule an appointment. Thank You!
|
|
|
1998 Okuma Howa 2SP20HG with Gantry loader
Nice machine. Inspect under power in Detroit. Will Load at no charge. 1998 Okuma Howa 2SP-20HG CNC Twin Spindle Lathe w/ Gantry Loader. Chuck Diameter: 2) X 8" Maximum Swing: 15.7" Maximum Turning Diameter: 8.3" Maximum Turning Length: 7.9" Hole through Spindle: 2.44" Each Spindle) Spindle Nose: A2-6 Spidle Speeds: 4.500 RPM(Max. Tool Turrets: 2) X 10 Positions Equipped with: Fanuc 18TT CNC(2) 8" 3-Jaw Hydraulic Chucks Robotic Parts Load And Unload System Parts Stocking Carousel Various Turret Tool Holders. Flood Coolant System Rear Discharge Chip Conveyor. All Available Manuals. We have the following lathes for sale 2000 Okuma LU25M CNC lathe with. U100L control and live tooling. $89,000 OBO 1993 Okuma LR25 CNC Lathe with 18" chuck and 5020 control. Price $25K 1998 Okuma GP-25 Cylindrical Grinder. Price ... more$149K 2004 Okuma LVT300M Verical lathe with E100L control. Price $49K
|
|
|
Lathe-American Pacemaker 32 X 84
American Pace Maker 32 X 84 Style I Engine Lathe Description Lathe American Pacemaker. S/n: 3375, Hole Through Spindle 2-3/4" swing over slide 32" 24" Diameter Length, Speed 900 RPM, tailstock, made by The American Tools Co; Cincinnati,OH. USA. style I 32x84, Dimensions: 19'x 6'x 4'9" weight 10Ton. It has an Allen Bradley Control Cabinet. This is a very good machine in good condition. It is used, and has a little wear on its paint. We are located in Bell Gardens,CA in case you would like to view this machine. Specifications Spindle Speed 9-900 rpm S/N: 3375 Swing 32" 19' X 6' X 4' 9" Dimensions Motor Specs 60HP 60Hz 3Phase 220/440 Volts* We can provide local delivery for a separate discounted price* We can also assist with out of state trucking for an additional cost PLEASE FEEL FREE TO ... moreCONTACT US WITH ANY SHIPPING QUESTIONS Phone(562) 927-0020/ email: jiossales@gmail.com
|
|
|
Engine Lathe 20" x 198" Lodge & Shipley Model 2013 Powerturn
20" x 198" Lodge& Shipley Model 2013 Powerturn Engine Lathe Specifications Swing Over Bed: 20.5" Max Swing Over Cross Slide: 13.5" Distance Between Centers: 198" Spindle Speeds: 2000 RPM, Spindle Bore: 2" Equipped With: 3) Jaw Chuck. Tailstock, Quick Change Tool Post, Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler in our office at(773) 290-1825 or email at: scottt@assetexchangeinc.com
|
|
|
2000 Okuma LU25M, 15" chuck, U100L Control, Live tooling & other Okuma's
We are also selling the following Okuma Equipment: 1998 Okuma GP-25 Cylindrical Grinder. See picture# 2. Price $149K 2004 Okuma LVT300M Verical lathe with E100L control. See picture# 3. Price $49K See Video Below USED MODEL LU-25M 2ST-400 OKUMA CNC LATHE. COMPLETE WITH OSP U- 100L CONTROL, NEW 2000 STANDARD MACHINING DIA…9.84” MAX MACHINING DIA…16.54” MAX LENGTH…25.59” SWING OVER SADDLE…16.54” SPINDLE SPEEDS…3500 RPM SPINDLE MOTOR…40 H.P. TURRET…V-12& V-10 M-TOOL SPINDLE SPEEDS…3000 UPPER TURRET ROTARY TOOLS…L-M12 EQUIPPED WITH: 15”3-JAW KITAGAWA CHUCK APPROX: 5) LIVE TOOLS APPROX(12) TOOL HOLDERS TURBO SYSTEM CHIP CONVEYOR APPROX: DIM 147” L X 89”W X 84” H APPROX: WEIGHT… 15.000 LBS We also have three Okuma LB15 CNC lathes for sale One Unit- 1990 Okuma LB15 Chucker. 12" chuck, Chip Conveyor, OSP5020L control with IGF. Email for ... morepics and details. Two Units- 1988 Okuma LB15 with 10" chuck. Chip conveyor, Okuma OSP500 control with IGF. Email for pics and details. Will sell as package or individually. Priced to move. Email me with your. Email address and phone number so I can get you pictures and details.
|
|
|
American 3220W CNC Lathe
American 3220 CNC Lathe and the Fagor 8025 Control. This lathe was remanufactured in 2000-2001 with new and rebuilt ball screws. AC Digital Drives, rebuilt x- axis. Linear encoder on x- axis. Eurotherm Main Spindle Drive. Not a lot of use since machine was rebuilt in 2000-2001. The 3220W swings over 32" and 10' between centers. This is a good machine and I just do not have the work to keep it. Machine is being sold as it is. Please inspect before purchasing to make sure the machine is what you want. We will load on your truck at our shop. We recommend buyer hires Apollo Machine Tool Services in Arlington. Texas to unhook the machine for shipment and to get it going again on your floor. Buyer is responsible for all shipping cost. Cashier's check or wired funds to my bank only before machine is unhooked and loaded. 6gf1.RcmdId ... moreViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*2%60%3E6gf1-13eafe716f3-0xf7-
|
|
|
Springfield 40" x 16' Heavy Duty Lathe 2-1/8" Thru Hole 25hp
Springfield 40" x 16' Heavy Duty Lathe Model 30" Actual swing 40" 16' Between centers, 2 1/8" Thru hole, 36" 4 Jaw Cushman chuck with reversible jaws, 8 Spindle speeds from 12 to 487 rpm, Thread dial on carriage, 60 Thread ranges from 2 to 120, Removable hardened bed ways, 2 Way Aloris quick change tool holder with approx. 6 tool holders, Roller bearing steady rest with 12" thru hole, 2 boring bar attachments, 3 Removable slide out chip coolant catch pans, Main drive motor 25hp 220/440v 3ph, Carriage motor 3hp 220/440v 3ph, Coolant pump 1/3hp 1ph, Overall Dim. 24' 4"L x 6' 6"W x 5' 8"H on 3.5" wood blocks, Est. Wt. 28,000 lbs. Cleaned& painted. Shipping: The buyer is responsible for all shipping& handling costs. Contact us for a shipping quote. We'll do our ... morebest to get you the lowest rate possible. We also allow local pick-up here at our facility in Hugo. MN 55038. We can load at no extra cost. Return Policy: We offer a 30 day return policy on all of our machines unless otherwise stated. Return shipping to be paid by the buyer. Item must be returned within 30 days of receiving the item. Payment: We accept PayPal. Credit cards(thru PayPal) Cashier's checks& Business checks. We will not ship the item until payment has been received& cleared. Buyers: We will not leave feedback for buyers until feedback has been received. Should you have any issues with your item please contact us before leaving neutral or negative feedback so we can resolve any problems. Additional Information: We test every machine to make sure it is fully functional before we ship it out. Also machines can be inspected under power here at our facility. Contact us to schedule an appointment. Thank You!
|
|
|
1993 Star SST-16 CNC LATHE
1993 Star SST-16 CNC LATHE SPECIFICATIONS: Maximum Cutting Diameter 0.62” Max. Head Stock 12.2” Spindle Bore 0.62” Spindle Speed 10.000 RPM Spindle Motor 3 HP Turret Positions: Main Spindle 9 Turret Positions. Sub-Spindle 3 Turret Positions Sub-Spindle Speed 6.000 RPM Sub-Spindle Motor 2 HP Machine Dimensions(Approx. 6.73' x 3.25' x 5.53' Machine Weight(Approx. 5070 lbs. EQUIPPED WITH: Fanuc O-TT Control. 12’ FMB Mini Turbo Barfeed. Back Working. Live Tooling. ReSell CNC Servicing the Needs of Manufacturers Worldwide ORLANDO | CHICAGO | HOUSTON | LOS ANGELES 2600 Maitland Center Parkway#290 Maitland FL. 32751 Email: Curt@ReSellCNC.com Website: Office) 407-478-8181 TERMS: Full payment via bank wire prior to removal-See Terms& Conditions for details. Machine sold"as is where is" with no expressed or implied warranties-Machine ... moresold free and clear of any and all liens and encumbrances. Out of state sales no taxes. Buyer responsible for all rigging and shipping charges. Subject to additional Terms and Conditions found on reverse side or attached hereto which customer acknowledges it has read and agreed to an invoice. Signature acknowledges final Invoice as a legal binding contract. Any and all disputes will be handled under Florida law in Seminole County. ReSell CNC LLC Location(Office) 2600 Maitland Center Pkwy. Suite 290 Maitland. FL 32751(Warehouse) 1065 Nursery Rd. Suite 1115 Winter Springs FL 32708 Quotations and Acceptances are subject to prior sale and immediate acceptance. And to change without notice. Orders are not subject to cancellation. Unless by written mutual consent. We reserve the right to correct typographical errors. It is understood that there are no conditions or agreements outside of this written proposal. Any clauses in the customers purchase orders which are contrary to these terms and conditions shall be null and void upon acceptance by the buyer of this proposal. ALL prior conversations, agreements and representations with reference to the subject matter are supersed
|
|
|
MIYANO, LP-21, FANUC 18T, 8"Chk, 2",Robot Loader. LOW HOURS m/c 314412
General Specifications As Per Brochure Specifications: Swing: 11" Spindle Speeds: 40- 4000 RPM Hole: 2.2" Turret: 12 Position X-Axis Travel: 6.89" Y-Axis Travel: 10.63" Turning Diameter: 11.82" Turning Length: 3.94" Power: 18 HP Equipped With(Must Be Verified By Buyer) Fanuc 18T CNC Control Chip Conveyor Robotic Loader Westek Table Less than 500 hours!
|
|
|
CNC Lathe Doosan Daewoo Puma 2000SY with Live Tool, Sub Spindle, Y Axis (2006)
More photos detail and video are available upon your request. Call Gregg. Scott, Mark or Steven Doosan Daewoo Puma 2000SY CNC Lathe with Live Tool and Sub Spindle and Y Axis(2005) Installed in(2006) Y Axis. Sub Spindle, Live Tooling, Bar Feed, Chip Conveyor, Fanuc 18iTb CNC Specifications(Preliminary) Swing Over Bed: 23.6" Swing Over Carriage: 21.6" Distance Between Spindles: 33.8" X-Axis Travel: 9.84" Y-Axis Travel: 3.94" Z-Axis Travel: 22.8" Spindle Speeds: 5000 main/ 6000 Sub, Equipped With: Full'C' axis on both Spindles. 6" Sub-Spindle Chuck, Collet Chuck on Main Spindle Chuck, Automatic Tool Presetter, Rigid Tapping On Both Spindles/ Nice Assortment of Live Tooling, Tool Monitoring System, Box Way Construction, Turbo Systems Chip Conveyor, SMW Space Saver 2200 Barfeed, Y" Axis Traverse, ... moreContact Us Call for more information: 773-866-9600. Ask for Gregg or Scott Click for video:
|
|
|
DAEWOO CNC TURNING CENTER **** REDUCED PRICE !
1989 DAEWOO PUMA 10 TURNING CENTER WITH JORGENSON CONVEYOR. FANUC CONTROLS, OT SERIES. GREAT WORKING CONDITION. REMOVAL AND SHIPPING WILL HAVE TO BE ARRANGED BY BUYER OR WE CAN GET A QUOTE TO HAVE IT MOVED AND SHIPPED.FOR ANY QUESTIONS CALL 636-532-7000 MONDAY THRU THURSDAY AND ASK FOR HOWARD. WAS LISTED FOR $ 14,995.00* NOW MARKED DOWN TO $ 12,500.00. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13eb07d4533-0x105-
|
|
|
Original Myford 2MT Precision Collets
Original MYFORD 2MT Precision Collets. Summary One original collet straight from the Myford factory. SIzes: 3/8" Used.387" NEW 9.0mm: Used 7.5mm: NEW Note: On the.387" collet- that is what is stamped on it. I've looked for a more accurate identification but without success. Happy to measure this for you. High quality workmanship. Postage As always. Postage at cost world-wide. Questions I’m happy to answer any questions you may have about this item
|
|
|
Okuma Captain L-370 BBMW CNC Lathe w/ Live Tooling, Sub Spindle, C-Axisw, 2005
Please see info below and photos on a really nice Okuma Captain L-370 BBMW CNC Lathe with Live Tooling. C-Axis, and Sub Spindle. This machine is loaded with options. Please see description below. It is under power in Cincinnati, OH and is available to show to you. This Okuma Captain has less than 4800 Cutting Hours. This machine will make someone an excellent machine. I do have the ability to load this on your truck. I can shop and get you a freight rate if you want me to do so. Please call Paul Trossman at 513-310-7433 w/ any questions or please email me at paultrossman@hotmail.com. OKUMA CAPTAIN L-370 BBMW CNC TURNING CENTER w/ Live Tooling& Sub-Spindle Model Captain L-370BBMW. New 2005 EQUIPPED WITH: Okuma E100L CNC Control w/CRT. Live Tooling, 6.5" Kitagawa 3-Jaw Chuck Sub-Spindle, 10" Kitagawa 3-Jaw Chuck Main Spindle, ... moreLive Tooling, C-Axis, 3.15" Big Bore Spindle Bore Option, Touch Setter, One Touch IGF, 3D Animation, Tool Life Management, Tool Wear Compensation, Lap 4, User Task 2, Exp. Auto Chamfering, Programming Help, Servo Link NC, Servo Link Spindle, Heavy Tools, HI-G Control, Inch/Metric Switchable, 2) Axial Live Holders, Chip Conveyor and Coolant System. CATALOGUE SPECIFICATIONS: Max Swing Over Bed. 20.08" Maximum Turning Diameter Main Chuck. 14.56" Maximum Turning Diameter Sub-Spindle. 8.23" Maximum Turning Length. 20.47" Main Chuck Size. 10" Sub-Spindle Chuck Size. 6.5" Cross Travel(X-Axis) 10.23" Longitudinal Travel(Z-Axis) 20.47" Feed Range(Infinitely Variable) 1-400 IPM Rapid Traverse Rate(X-Axis) 787 IPM. Rapid Traverse Rate(Y-Axis) 984 IPM. Number of Turrets. 1. Tool Positions.
|
|
|
"V" BLOCK FOR LATHE MACHINE TOOL WORKSHOP BRITISH MADE
1 5/8" X 1 1/8" X 1 1/8"
|
|
|
LeBLOND 15" x 54" GEARED HEAD TOOL & DIEMAKER LATHE
aims LeBLOND 15" x 54" GEARED HEAD TOOL& DIEMAKER LATHE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by R.K. LeBlond Machine Tool Co. This is a used Geared Head Tool& Diemaker Lathe in working condition. Serial# 5HC-737 Features: Geared Head. Taper Attachment 8" Three Jaw Chuck. Steady Rest. 14" Faceplate. Coolant System with Gusher Pump. Specifications: Swing: Swing Over Bed: 15" Swing Over Cross Slide: 10" ... moreSwing Over Compound Slide: 3" Capacities: Distance from Floor to Center: 43-1/2" Distance Between Centers: 54" Spindle: Mount: L0 Spindle Bore: 1-1/2" Number of Spindle Speeds: 16 Range of Spindle Speeds: 31/ 41/ 56/ 75/ 97/ 135/ 183/ 246/ 320/ 420/ 570/ 765/ 1.000/ 1,300/ 1,780/ 2,400 rpm. Threads: Thread Changes: 48 Thread Range: 4- 224 tpi. Carriage: Cross Slide Travel: 7-1/2" Compound Rest Travel: 4" Tailstock: Spindle Travel: 10-1/2" Taper of Center: 4 Morse Taper Spindle Diameter: 2-3/16" Bed: Width of Bed Face: 12-3/16" Length of Bed: 80-1/2" Taper Attachment: Maximum Taper Per Foot: 3-1/2" General: Electrical: 220 Volt. Three Phase, 60 Hz Overall Dimensions: 111" x 48" x 55" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LeBLOND 15" x 54" GEARED HEAD TOOL& DIEMAKER LATHE LeBLOND 1
|
|
|
CLEAN 2003!! ACRA TURN 14" x 40" GEARED HEAD GAP BED BENCH LATHE - #GH-1440A
aims CLEAN 2003! ACRA TURN 14" x 40" GEARED HEAD GAP BED BENCH LATHE- GH-1440A read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. If the player doesn't work: This is a used Acra Turn Geared Head Gap Bed Bench Lathe in EXCELLENT condition. Model# GH-1440A Serial# 972 Date of Manfacture: 04/2003 Features: Geared Headstock. Gap Bed. Induction Hardened Bedways. 6" Three Jaw Chuck. Coolant System. HHiP Quick Change Tool Post& Holder. Specifications: ... moreSwing: Swing Over Bed: 14" Swing Over Gap: 20" Swing Over Cross Slide: 8-1/2" Swing Over Compound Slide: 3" Capacities: Distance from Floor to Center: 42-1/4" Distance Between Centers: 40" Spindle: Mount: D1-4 Spindle Bore: 1-1/2" Number of Spindle Speeds: 16 Range of Spindle Speeds: 45 to 1.800 rpm. Threads: Inch Threads: 4- 112 tpi Metric Threads: 0.45- 7.5 mm. Carriage: Cross Slide Travel: 6-3/4" Compound Rest Travel: 3-3/4" Tailstock: Spindle Travel: 5" Taper of Center: 3 Morse Taper Spindle Diameter: 1-3/4" Bed: Width of Bed Face: 8-1/4" Length of Bed: 54" with a 8-3/4" gap. General: Electrical: 220 Volt. Three Phase Overall Dimensions: 73" x 30" x 48" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. CLEAN 2003! ACRA TURN 14" x 40" GEARED HEAD GAP BED BENCH LATHE- GH-1440A CLEAN 2003! ACRA TURN 14" x 40"
|
|
|
SUMMIT 16" x 60" GEARED HEAD GAP BED ENGINE LATHE
aims SUMMIT 16" x 60" GEARED HEAD GAP BED ENGINE LATHE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made by Summit Machine Tool Manufacturing Corp. This is a Geared Head Gap Bed Engine Lathe in working condition. Model# SHB400X1500 Serial# 79B5P056 Features: Removable Gap. Inch/Metric Threads. 8" Three Jaw Chuck. Gamet Spindle Bearings. Taper Attachment. Coolant System. Specifications: Swing: Swing Over Bed: 16" Swing Over Gap: 24" Swing ... moreOver Cross Slide: 9" Swing Over Compound Slide: 4" Capacities: Distance from Floor to Center: 41" Distance Between Centers: 60" Spindle: Spindle Nose: D1-6 Spindle Bore: 2" Number of Spindle Speeds: 19 Range of Spindle Speeds: 25 to 2.000 rpm. Threads: Inch Threads: 1 to 92 tpi Metric Threads 0.5- 11.5 mm. Carriage: Cross Slide Travel: 9" Compound Rest Travel: 4" Tailstock: Spindle Travel: 7" Taper of Center: 4 Morse Taper Spindle Diameter: 2-3/4" Bed: Width of Bed Face: 13-3/4" Length of Bed: 78" w/ 10-1/4" gap. General: Motor: 7.5/6.1 kW Electrical: 220 Volt. 60 Hz, Three Phase Overall Dimensions: 124" x 46" x 55" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SUMMIT 16" x 60" GEARED HEAD GAP BED ENGINE LATHE SUMMIT 16" x 60" GEARED HEAD GAP BED ENGINE LATHE SUMMIT 16" x 6
|
|
|
Hardinge cnc lathe super slant Fanuc Gn6 control
Up for sale is this Hardinge Super Slant CNC lathe with a Fanuc GN6 control system. The machine seems to be in good condition. But the paint is bad. Machine was originally Blue, but has been poorly painted white. I does have a chip conveyor. Hydraulic chuck and manuals are included. I bought this machine to retrofit a new control on to for development. Got it to my rigger and it is to large for me to handle with the equipment I have access to. The previous owner stated that the machine powered up but needed"parameters" installed. I planned on upgrading the older Fanuc control to a newer PC based unit. My loss is you gain. Please contact me for more information and I will do my best to help you. It has been re painted at some point. Not very well done. I really do not know a whole lot more than what I have stated. I can have it loaded. ... moreAnd even arrange a shipper. Thank you
|
|
|
True Trace single axis tracer attachment for 9"to 15" Lathe
true trace single axis traceing attachment for 9"to15" manuel lathe model#1067-29 ser#11010DE come complete w/hydraulic unit new hoses service/operators manuel and complete blue prints for making template holder unit is fully operational and has been set up and tested will. Fit a large variety of manuel lathe have cnc lathe and have no use for tracer
|
|
|
ATLAS 101 METAL LATHE 6" Swing 16" Bed 3 Jaw Chuck & Feeds VG+DEAL!
ATLAS Quality Clausing Corp. Kalamazoo MI METAL LATHE No. 10100 ~16" Work Bed 6" Swing ~Overall Length 34" 3 Speed Geared Selector Three(3) Jaw Chuck Feed Tables Tool Rest Heavy Steel WOW- Offered for sale is a ATLAS Quality No. 10100 METAL LATHE with 3 Jaw Chuck. Dead End(Tail Stock) Drill Chuck, 3 Geared Speed Selector, feed tables(cross slides) and tool rest/ post. Measures about 34" Long, the work area is about 16"Long with a 6" Swing. This fine metal lathe is well suited for small to medium projects. She looks lightly used, if used at all. Comes from a watch and clock maker's shop. I see no signs of damage other than a crack in the plastic pulley/ gear cover. The pulley belt is there but no motor. Though almost any decent 3/4 to 1 HP motor should work fine. No manual, though should be available on line, ... morebelt instructions on inside lid. The Atlas name plate is on the bed end and on gear housing. Weighting about 100 Lbs and I would prefer local pick-up. Can meet within 50 mile radius of Baltimore. But will ship via ODFL(Old Dominion) if buyer wants to pay the freight and boxing costs. Contact me in advance for shipping estimates. Please see the many pictures provided for more details. Thank you. Shipping based on actual postage and Insurance Priority Mail required on some international shipments for insurance purposes. I do not ship to some countries. My goal is your happiness. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Citizen E32 Swiss Machine Lathe
Citizen E-23 Machine Machine is under power and in Wallingford. CT for inspection. Comes with FMB 4000 Turbo Bar loader With 18 or so bar push collets Citezen TP1000 Tool Presetter Parts Belt Multi speed chip conveyor Oil Chiller Unit 8 geared live heads Around 2 dozen tool holders Support wrenches and tools for machine use
|
|
|
Milltronics ML22 x 60 CNC Lathe
2006 Milltronics ML22 Lathe. 60" Between Centers. 8 Station Tool Changer. 16" Bison Adjustable Chuck. Manual Tailstock. Chip Conveyor. Steady rest. Surplus to our needs.
|
|
|
HWACHEON CUTEX-240 CNC TURNING CENTER with 12' MTA Bar feeder!!
HWACHEON CUTEX-240 CNC TURNING CENTER with LIVE TOOLING and SUB-SPINDLE Model Cutex-240ASMC. New 6/2006 Stock# K13610 EQUIPPED WITH: Fanuc 0i-TC CNC Control. Multiple Part Program Storage, RS-232 Port, Live Tooling. Full Contouring C-Axis Spindle, Sub-Spindle, Parts Catcher, Barfeed Interface, MTA 12' Magazine Bar Feeder. Sub-Spindle Part Ejector, Rigid Tapping with Rotary Tools. Chip Conveyor and Coolant System. CATALOGUE SPECIFICATIONS: Max Swing Over Bed. 22.8" Max Turning Diameter. 15" Max Machining Length. 23.6" Standard Chuck Size. 8" Spindle Bore. 2.99" Spindle Nose. A2-6 Cross Travel(X-Axis) 8.46" Longitudinal Travel(Z-Axis) 26.19" Rapid Traverse Rate(X-Axis) 1417 IPM Rapid Traverse Rate(Y-Axis) 1417 IPM Number of Turrets. 1 Tool Positions. 12 Total Spindle Speed Range. 50-5000 RPM Spindle Horsepower. ... more25 HP Sub-Spindle Speed Range. 60-6000 RPM Sub-Spindle Horse Power. 10 HP Milling Spindle Speed Range. 50-5000 RPM Milling Spindle Horse Power. 5 HP Approximate Machine Dimensions. 161" x 84" Approximate Machine Height. 73" Approximate Machine Weight. 10.000 LBS All Tool holders. Collet pads and manuals included. Machine is in excellent working order and is under power in production use. I have video of it running if you want to see it e-mail me. $2500 Deposit required within 24 hours of purchase. Purchaser is res
|
|
|
OKUMA LU-15-2SC-600 4-AXIS BIG BORE CNC LATHE TURNING CENTER
OKUMA LU-15-2SC-600 4-AXIS BIG BORE CNC LATHE TURNING CENTER General Specifications Swing over saddle 14.96" Max. Turning diameter 14.17" Max. Turning length 23.62" Travels(X1& X2) 10.24" 5.50" Travels(Z1& Z2) 25.20" 24.21" Spindle bore diameter 3.15" Spindle nose A2-8 Spindle motor 30 HP Spindle speeds(2 ranges) 75-3800 RPM Tool positions upper 12 Tool positions lower 8 Rapid traverse X-axis 591 IPM Rapid traverse Z-axis 787 IPM Tailstock Taper MT5 Tailstock quill travel 4.72" Approx. weight 12.000 Lbs Motor Specifications Not Available Equipped With OSP 7000L CNC Control(2) Turrets 8 Station Lower 12 Station Upper Chip conveyor Tailstock Collet chuck Turret position compensation Tool life management. Auto door, NC Turret, In/Metric, Animation, Load monitor, Touch setter, Mac Management, ... moreTool gauging system, Lap 4, Nose-R 2B, User task 2, Exp. Auto champfering. Serial Number 821 Year 1997 Location Livonia. MI
|
|
|
Large Lot of 30 High Speed Steel Lathe Mill Tool Bits, Machinist tools, Carbide
Large Lot of 30 High Speed Steel Lathe Mill Tool Bits. Machinist tools, Carbide Used. As is
|
|
|
Yam CK-2 CNC Lathe
We are selling this Yam CK-2 CNC Lathe. It has a Fanuc OT Control. 10" Chuck Turret, and ProgramableTailstock. The machine is in good condition.The outside of the machine could use a little touch up paint, other than that, it's in good shape.This machine is located in Washington State. Buyer is respondsible for loading. E-mail me at CNCMachining90@comcast.net or through E-bay if you have an questions Machine is being sold as is. Where is.
|
|
|
MIYANO JNC 35 CNC LATHE - NO RESERVE AUCTION
ID# 90173 Machine Specifications: Max Machining Length. 18.5" Diameter of Spindle Face. 5.5" ID of Draw Tube. 1.41" Spindle Nose. A2-5. Spindle Speeds. 25- 5.000 RPM. Spindle Motor. 10 HP. X-Axis Travel. 5.75" Z-Axis Travel. 13.5" Rapid Traverse X. 315 IPM. Rapid Traverse Z. 354 IPM. Turret Positions. 8. Tailstock Max Stroke. 9.844. Tailstock Max Adj Pressure. 1.400 lbs. Equipped With: Fanuc 3T Control. Collet Chuck. Chip Conveyor. Chip Pan. Tailstock. All Available Manuals and Tooling. Machine Dimensions(Approx) 11ft(L) x 6ft(W) x 6ft(H) Machine Location: MI. Additional Information: Machine can be seen under power. Terms and Conditions: All items are subject to prior sale. Payment due in full via bank wire within five(5) days of auction close. All items are sold"AS-IS. WHERE-IS" and with all faults. Buyer ... moreis responsible to coordinate pick up with seller and buyer is responsible for all freight charges. Seller will prep item for shipment and load onto buyer's truck. Seller makes no guarantees regarding accuracy. Errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or conditions of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. Contact Information: Contact Jason Sanda at 847-497-9800 for any questions and for payment detail.
|
|
|
Seneca Falls 9 x 60 Metal Turning Lathe, DC Variable Speed, NICE!!!
We will assist in loading onto a low bed trailer or lift gate or roll back truck. Or we will also help the buyer find a shipper if needed, FOB our shop, at the buyer's cost. It weighs approximately 900 pounds. This is a great lathe with a LOT of use left in her. Please give us a call if you need more info, or if you are going to be in the Adams, MA area you are welcome to stop in and see it run. Please note that we are a full time storefront as well. We require 4 to 5 weekdays from completion of payment for us to get the item packaged. Labelled and taken to the Post Office. We DO try to do better than that, however. We also always send you a tracking number when we pack and label your item. Please utilize this number to view the shipping progress and PLEASE DO NOT hold US responsible for the slowness of the U.S. Post Office Snail Mail! ... moreWe have had a few buyers get extremely upset at US when the U.S. Mail took their package on an around the country tour, at no fault of Pete's. Our packing and shipping day is typically a Friday. We do not ship on weekends, and our Post Office is not open for drop off shipping on weekends. We also endeavor to notify buyers of any delays that we may see occuring. PLEASE call us at 413-743-0780 if you have any concerns or any problems with shipping delays or if there is any problem with the item as we ALWAYS make it right. We do not always get to our eBay messages each day as we are very busy, so please CALL if there is any problem. We also ALWAYS post feedback as we highly value your business. We appreciate our eBay customers and try mightily to do our BEST for you. We also will COMBINE shipping on multiple items won to save you money. Small items go via U.S. Mail. Larger items use FedEx so to avoid delays, PLEASE make sure we have not only your mailing address but an address for FedEx deliveries as well. THANK YOU from the crew at Pete's Gun Shop! c2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-13ed464adb2-0xff-
|
|
|
CHEVALIER FCL-2480 (24"x80") CNC Flat Bed Lathe - 12" Chuck, 20HP, 1800RPM
Equipped With: Autocon Delta Dynapath CNC control- Teach mode- G code programming- Constant surface speed Electronic hand wheels for manual operation 12" 3 Jaw chuck Sauter Disc Type Tool Turret 0.5.480.516-089 768 Manuals included Lathe was re-furbished by local machinery re-builder prior to our purchase. We have not run jobs on lathe job was cancelled Buyer to arrange shipping. We will load to your semi for you. Dimensions 177"L x 64" W x 77" T Wt 10.000 lbs. ecification Description Max Swing over Bed, 24" Swing Over Cross Slide, 14.5" Centers, 80" Spindle Bore, 3.15" Spindle speeds, 40- 1800 RPM, Spindle HP, 20 HP, Chuck Size, 12" 3 Jaw, Tool Turret, Sauter Disc Type
|
|
|
1995 MAZAK QUICK TURN 20, T-PLUS CONTROL, 8 INCH CHUCK
Hello. Up for your consideration to purchase is this 1995 Mazak Quick Turn 20. It has the T-Plus control. An 8 inch chuck and 8 station turret with 4 i.d. holders as well. There is a chip conveyor as well as some manuals for the machine too. The spindle is a 2" thru. I bought this machine just as it is and had the intentions of fixing it and using it. However I do not have the time or the resources to do this so I am selling it as is. My loss is your gain. When I bought the machine the owner of the shop assured me that the machine was running really well prior to the servos going out. His maintenance guy removed the servos and they were in the middle of a move to another building and somehow the drives got misplaced. I did some checking and these can be purchased rebuilt for about $3000- $4000 each. These machines running still go for ... morewell over $20,000 that is why I am setting the asking price at $10,000. If you have the drives this will be an easy fix to get up and running. Anyhow I have told you all that I know and you are buying the machine for a parts or repair machine as it is not currently up and running. Thank you for looking. Also to let you know there is a rigging company locally that can load it for about $350- $450 and that is the responsibility of the buyer as well as all freight charges.
|
|
|
G0670S 16" X 40" Electronic Variable Speed Lathe with DRO-Grizzly Industrial
This machine ships via a common carrier. Buyer is responsible for making arrangements to accept delivery. See below for details. G0670S 16" X 40" Electronic Variable Speed Lathe With Digital Read Out! This is one of the best Taiwanese lathes to hit the states with all the mass and rigidity needed for the modern machine shop. Match any material requirement with just a turn of the dial. Variable speed spindle control with a range of 20- 2500 RPM and a digital readout offers absolute control of surface speeds. Besides having a variable speed. The cross slide is fitted with electronic control over the spindle. Flip the switch and the CSS feature will automatically adjust the spindle speed up or down to suit the diameter of the cut. An excellent way to maintain finishes and maximize tool life! This lathe also features precision hardened ... moreand ground ways, extra heavy tailstock casting with lots of barrel stroke and a universal quick change gear box. It’s also built to last! Pressurized lubrication in the head stock means the hardened and ground gears will give you smooth, trouble free operation under the most demanding workload. This machine also has a variable drive clutch in the gear box for safety. Adjust it higher for those harder steels and knurling or back it off for a measure of safety when working up close and personal with those delicate internal shoulders. This is truly a fine machine! Specifications: Swing over bed: 16.14" Swing over gap: 22.95" Swing over cross slide: 10.39" Distance between centers: 40" Spindle nose: D1-6 camlock Spindle nose taper: MT#6 Spindle bore: 2.06" Tailstock barrel taper: MT#4 Tailstock barrel travel: 6" Cross slide travel: 8.6" Compound travel: 5.1" Motor: 5 HP. 220V, 3-phase with inverter, Yasakawa frequency drive Number of speeds: Variable Speed range: 20-400. 400-2500 RPM Range of threads(inches) 45@ 2-72 TPI Range of threads(metric) 39@ 0.2-14 mm Diametrical pitch range: 21@ 8-44 DP Modular pitch range: 18@ 0.3-3.5 MP Width of
|
|
|
MIYANO BNC 34C CNC LATHE - NO RESERVE AUCTION
ID# 90216 Machine Specifications: Max Machining Length. 7 7/8" Max Turning Diameter. 4 3/4" ID of Draw Tube. 1.47" Spindle Nose. Flat. Spindle Speeds. 170- 5.000 RPM. Spindle Motor. 10 HP. X-Axis Travel. 3 7/8" Z-Axis Travel. 11 3/8" Turret Positions. 6. Equipped With: Fanuc 3T Control. Collet Chuck. Chip Conveyor. Machine Dimensions(Approx) 59"L) x 100" W) x 67"H) Machine Weight(Approx) 5.290 lbs Machine Location: MI. USA Additional Information: Machine can not be seen under power. Description: Machine has a turret switch problem and is not running for that reason. Buyer is responsible for removal. Terms and Conditions: All items are subject to prior sale. Payment due in full via bank wire within five(5) days of auction close. All items are sold"AS-IS. WHERE-IS" and with all faults. Buyer ... moreis responsible to coordinate pick up with seller and buyer is responsible for all freight charges. Buyer is responsible for removal. Seller makes no guarantees regarding accuracy. Errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or conditions of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. Contact Information: Contact Jason Sanda at 847-497-9800 for any questions and for payment detail.
|
|
|
South Bend Heavy 10 Ten Lathe - with Tooling - 4.5' bed ready to make chips
South Bend Heavy 10 lathe with taper attachment. Hard to find 4.5' hardened bed. Ways are in superb shape with only superficial nicks, V's are smooth showing no ware throughout the length. Has double tumbler gear box and the better cam operated apron clutch. Spindle is 2 1/4"8tpi and 1 3/8" through hole. Motor is 220volt 3 phase and comes with electronics, all you need is power. The taper attachment has a broken locking lever, otherwise its all there. Thread dial is included. Lots of tooling included also. A Rohm Supra chuck and a Grand live center. A South Bend brand 5" 3-jaw reversible chuck with backing plate. A 7" face plate and a 6" 3-jaw(2piece! Buck chuck no back plate. There is also a Phase 2 wedge type quick-change tool post set which includes a knurling holder, boring, parting and 2x turning holders. ... moreAlong with miscellaneous carbide tooling and a HSS boring bar set, like new. There is also the tailstock and carriage locking wrenches. This is a real nice machine. And very heavy, probably about 1000-1100 lbs. I have a forklift so I can load it in the back of your pickup. If you want to ship you must contact me BEFORE bidding. Its your responsibility to deal with the trucking company. I will charge an additional $250 to palletize, pad and strap the machine. Local pickup preferred and cash only. Questions? Please ask, and please avoid asking when there is 5 minutes left in the auction. Thanks for looking.
|
|
|
Logan Model 200 Metalworking Lathe
Logan Model 200 Metalworking Lathe. Excellent mechanical condition. Works great. No rust on critical surfaces such as lathe bed. Minor surface rust in some of the non-critical areas. If anyone is interested in receiving a copy of the owner's manual let me know and I can email a copy of it to you before you bid. Specs: Number of Spindle Speeds: 12, Spindle Speed Range: 30 RPM to 1450 RPM, Threading Range: 4TPI- 64TPI(34 different threads possible in this range) Number of Non-Threading Feed Rates: 13(from 0.0046" to 0.0156" Swing over Bed: approx 5" Swing over Carriage: approx 3" Distance Between Centers: approx 28" Hole Through Spindle: 13/16, Motor Horsepower: 1/2HP, Approximate year of manufacture is 1942, Included Parts: 3-Jaw Self Centering Scroll Chuck, 4-Jaw Independently Adjustable Chuck, Faceplate, Full ... moreSet of Change Gears, Tailstock with Live Center. Dead Center, Drill Chuck Steady Rest, Stand, Chip Tray, Extra Accessories/Goodies: Dumore Mini-Toolpost Grinder(works great. See image) Milling Attachment(Needs work. Bad bearings) A huge selection of literally hundreds of HSS tool bits. Notes on Pickup and Shipping. Pick up or buyer arranged shipping only! Weighs several hundred pounds. But could easily be transported in a pickup truck. Have an engine hoist that can be used to load the lathe into buyer's vehicle. Item is located in the Imperial Missouri area(about 25 minutes south of Saint Louis) 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13edc9bfd36-0xfe-
|
|
|
Hardinge HNC CNC Turret Lathe
We are selling this Hardinge HNC CNC Turret Lathe. It has been upgraded to a Yasnec Control. It has been disconnected from power and sitting for about a month, but was running fine before that. I am selling for about what it is worth in scrap, but it's a nice machine. This machine is located in North Carolina. Buyer is respondsible for loading. E-mail me at CNCMachining90@comcast.net or through E-bay if you have an questions Machine is being sold as is. Where is.
|
|
|
Jones & Lamson #8A Turret Lathe
Jones& Lamson#8A Turret Lathe. 12" chuck 3" thru hole. Comes with ALL the collets up to 3" Saddle type turret lathe. 36" turning length. 12' overall length. All sales are final. Buyer removes. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*211fbc%3E-13edc9bfd3b-0xf2-
|
|
|
Clune Clutch Brake (CNC,Lathe,mill,break,Nardini) 016.041.050
Clune Clutch. Nardini P/N- 016.041.050 Please email with any questions or picture requests! Thanks!
|
|
|
Local Pickup AS IS JET JWL-1220VS Variable Speed Woodworking Lathe
ebay template Local Pickup AS IS JET JWL-1220VS Variable Speed Woodworking Lathe. Click for more Pictures Local Pickup AS IS JET JWL-1220VS Variable Speed Woodworking Lathe*Brand: JET*Model: JML 1220VS*Condition: Open box. Used. The frame bridge is broken in half which refers to the pictures No.2 and 3. Tested working. It might be missing parts/accessories. Sold AS IS or For Parts. What you get: Items shown on image 1. Items/parts not shown on images are not included with this listing. Retail value: $799.99*Item might still be within warranty period* ITEM IS SOLD AS IS/FOR PARTS. NO RETURN/EXCHANGE/REFUND* WE DO NOT SHIP THIS ITEM. LOCAL PICKUP ONLY! ~Please review pictures for the actual item! ~100% Authentic! Specifics: Please look at manufacturer’s website for product details* The digital images we display have the most accurate color ... morepossible. However. Due to differences in computer monitors, we cannot be responsible for variations in color between the actual product and your screen. ~Pictures indicate actual Item*Please click‘enlarge’ to see more pictures* JL& LH 100% Satisfaction Guarantee If there is an error between what you received and the listing. Feel free to contact us during our business hours and allow us to resolve your issues before leaving us bad feedback. Business Hours: Monday- Friday 10:00am-5pm EST Local eBay Pickup Hours: Friday: 10am- 5pm EST and Saturday 11am-4pm EST(Buyers MUST present the Paypal receipt and photo ID upon pickup. OUR PHONE NUMBER: 770-623-1808 EMail: Please Contact us through eBay Message) Sorry. But we only answer emails and phone calls during our business hours. We offer a 14 day Money back or Exchange. EXCLUDING AS-IS/ For parts items. If there is a shipping damage. Please contact us as soon as possible so we can arrange return with shipping company. THANK YOU AND HAPPY BIDDING! Please bid only if you agree on our terms. Continentail US Shipping Only. Seller reserve the right to choose method of shipping without notice. No sale outside cont
|
|
|
Taig Jewelers Precision Benchtop Micro Lathe II Model 4500 Dayton Motor
Used very little. Clean Taig Micro Lathe II model 4500 w/ a Dayton motor. all I have is what is in the pics no other extras.Thank you.
|
|
|
Hardinge Steady Rest 9" Lathe ESM TR 59 Split Bed, Tooling
Normal 0 MicrosoftInternetExplorer4 Normal 0 MicrosoftInternetExplorer4 Normal 0 MicrosoftInternetExplorer4 Normal 0 MicrosoftInternetExplorer4 Up for an auction is a Steady Rest that came with my Hardinge ESM/ TR59 model(9” swing) It will also fit Cataract and Elgin lathes with a dovetail bed of 2.5” top and 3” bottom width. I do not know the exact shipping costs. So please don’t ask me while the auction is running. I do not profit from shipping and packaging so I will charge you what ever is the actual cost. I will try to find a good balance between using the smallest size box with enough padding for safe delivery. Please Note: All my Hardinge related auction items came from the same lathe Hardinge ESM/ TR 59– 9” swing which I got from an elderly Normal 0 MicrosoftInternetExplorer4 gentleman who got ill and deiced to part with some of his ... morestuff. I believe it was used in a home environment so most of the stuff is well taken care of. All sales are final. No returns or exchanges.
|
|
|
Vintage 6" Craftsman Metal Lathe, Chuck & Tooling for Machinist in S. California
Auction Wizard 2000 Listing Template- AW2KLOT#18656 Craftsman 6" Metal Lathe Used vintage lathe therefore shows signs of use however as you can see is in good condition. Lathe runs. Turns but other than that I don't know much about such things. Comes with tooling shown. I don't think the tool rest pictured in the middle(last picture) fits this lathe. It's painted green and the lathe looks more like a blue color. About 58" total length. DO NOT BID UNLESS YOU ARE ABLE TO PICK UP. WE ARE UNABLE TO SHIP THIS ITEM. CA Residents add 8% sales tax. Item must be paid for at pickup with cash only in the Lake Elsinore area of Southern California between the I-15 and I-215 near Canyon Lake. My Zip Code is 92587. Winning bidder will receive our invoice indicating total amount due. You must contact us within 24 hours of winning. Because ... moreI hold a California Sellers Permit I am required to report all earnings to the State and charge CA Residents 8% sales tax. This is something I do not like to do and personally make no more profit from. It makes no sense but it is the law. Sorry. Please do not email me and haggle with the price. We will not accept any offers lower than the starting bid. Items not sold will be relisted till they do sell.
|
|
|
CC CLARK HOLEMAKER ADJUSTABLE CUTTING TOOL USA
Used? CC Clark Holemaker adjustable cutting tool. Quality USA made tool. Please look at photos for condition. Any questions please ask. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Chevalier FCL-1840F CNC lathe
Manufacturer: CHEVALIER | Stock Number: 00201-A-0712 | Description: CHEVALIER FCL-1840F CNC LATHE Model: FCL-1840F Year: 1996 Specifications: 3 phase 220v Fagor 800T CNC two axis control 3 gear range variable speed spindle 40 to 2000 rpm 10" 3 jaw chuck 2 1/4" spindle bore MT4 tailbody Quick change tool post Serial# X186C007# of axis: 2 Power: 7.5hp Turning diameter: 18" Swing: 18" Centers: 40" Tailstock: Yes CNC control: Yes Other information: Satisfactory condition In stock Additional information and/or images of this product may be available– please contact us and we will send it to you. Please check out our other items for sale by clicking‘See other items’ to the upper right. Thank you for viewing this item. We stand behind all items we sell and you may purchase with confidence. If you would like more information ... moreplease feel free to contact us. Our contact info is located at machinerywarehouse.ca. This item is available for previewing at our warehouse in Hamilton. Ontario. Please contact us to arrange a personal viewing if you wish to inspect this item before purchasing. Pick up in Hamilton. Ontario is welcome(during regular business hours) and can be arranged at no extra charge. If you wish to have the item shipped, we will provide you with the item weight and dimensions. You are responsible for making your own shipping arrangements with a freight forwarder or carrier. If you decide to purchase this item. Please wait for our invoice before making payment. We accept Visa, MasterCard, American Express, Paypal and certified cheque. Payment must be received within five business days or sale will be void and item will be relisted. Canadian customers will be charged GST or HST(depends on your province/territory) International customers are not charged Canadian tax. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13ee6d04a7e-0x105-
|
|
|
Mazak Super Quick Turn 10MS CNC Lathe-with Live Tooling & Subspindle
We are selling this Mazak Super Quick Turn 10MS CNC Lathe. It has a Mazatrol T32-3 Control. The machine is a Live Tooling CNC Lathe with a Subspindle. The machine is in Very Nice Condition. It comes with Chuck, Turret, Tooleye, Chip Conveyor, LIVE TOOLING(2) Live Toolholders are going with it. They are worth about $4,000 each) and SUBSPINDLE. There is allot of other tooling going with it. This machine is located in Minnesota. Buyer is respondsible for loading. E-mail me at CNCMachining90@comcast.net or through E-bay if you have an questions Machine is being sold as is. Where is. 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13ee8325a9a-0xf3-
|
|
|
Clausing Colchester 17/28" x 80" Gap Bed Engine Lathe W/ Taper Attach. & Coolant
Clausing Colchester Model 8000 Mascot. 17" X 80" with 28" Swing in gap.Taper Attachment, 3 and 4 jaw chuck. Specification Description Swing, 17" Swing Over Carraige, 10.5" Swing in Gap, 28" Center Distance, 80" Spindle Nose, D1-8, Spindle Hole, 3- 1/16" Spindle RPM, 20- 1500 rpm, Spindle Horse Power, 10 Hp, No. of Gears, 16, Feeds English(13) 0.002" to 0.32" Per Rev. Feeds Metric(13) 0.06 mm to 1.0 mm Per Rev. Threads English(38) 2-72 TPI, Theads Mitric(40) 4-14 TPmm, Theads Diametral(27) 8-60 DP, Theads Mudule(18) 0.3- 3.5 mod. Voltage, 220/440 3 Phase 60 Cycle, Overall Dimensions, 141" L x 51" W x 56" H, Weight, 4.900 lbs. Equipped With: 12" 3-jaw. 16" 4-jaw Taper Attachment Coolant System and Splash Guards Enco Tool Post and Holders 12" 3-Jaw Chuck 16" ... more4-Jaw chuck Face Plate Steady Rest Follow Rest Work Light Drill Chuck and Arbor 4 Position Carriage Stop. This machine is in great mechanical condition NOTE: All specifications are approximate. And are not binding in any way. We endeavor to make information as complete and accurate as possible. If you notice a discrepancy, please let one of our sales people know so that the error can be corrected. Warranty USED EQUIPMENT: 30 day return privilege per MDNA. We suggest you Inspect All Used Machinery Prior to Purchase. This machine needs to be shipped via a flat-bed. If you wish to try to ship a different way. Please contact us to discuss before making arrangements. Dimensions should be above. Please contact Erik for help on getting Freight Rates(Serious Buyers only-Please don’t waste our time) at(847) 338-7139
|
|
|
Beautiful Boley F1 Watchmaker Lathe
Rare and beautiful Boley F1 Watchmaker Lathe. The F1's unique characteristic is turning between centers while utilizing the standard drive motor(no idler pulleys needed! This lathe and many other accessories listed in currently running auctions were part of a watchmakers estate. Here is what you'll get: In addition to the heavy F1 lathe base and headstock with black friction drive carrier. Two tailstocks are included: a standard concentric tailstock with runner and several tapers; and also an excentric tailstock with runner and several pieces of tooling. Two photos show an excentric pivot disc for holding pivots while cutting or polishing. The Derbyshire tip-over tool rest works very well with this lathe. The K&D lathe motor is mounted in a pivoting yoke on the lathe base permitting fore/aft movement to control belt tension. A ... morefoot operated rheostat controls motor speed and drives either pulleys with"O" ring belts which are included. And by flipping a switch at the back side of the lathe base, the motor can be reversed permitting work from front or back sides of the lathe.
|
|
|
Miyano BNC-34 CNC Lathe - 1985 Nice Machine
Below is the description I was given when I purchased the machine in 2011. 1- Used) 1985 Miyano Machinery. MODEL: BNC-34 CNC TURNING CENTER Serial No. BN31093C SPECIFICATIONS: Bar Capacity 34mm(1.32" Turret 6 station Rapid traverse(x& z) 315 IPM Spindle nose- Main/ flat nose-135mm Spindles Speed Main/ 4500 RPM Spindle motor- Main 7.5 HP Control system Fanuc 3-T(When I start the control I think it says DNC10 on startup screen) Machine weight 5720 lbs. Machine Dimensions 100"L x 55"W 240VAC 3Phase. EQUIPPED WITH: Main Spindle collet- 5C All tool holders Foot pedal for chuck open/close. I added this CNC lathe to my shop a couple years ago but was not able to get any significant orders to use it on. It has been a very nice machine and I was able to hold better than +/001 on a couple jobs I did. I never used the tail stock but ... moreI experimented with it and found it works. Control has a 25 pin serial port. G-Code can be written offline and loaded to control via this port. I connected a cheap laptop to it and bought some DNC Software and that setup works well for both uploading and downloading. The laptop and software do not go with the machine. If the software licensse is transferrable. I would be willing to discuss this with the buyer. The main control power supply was faulty when I bought it but I had that repaired and it starts up fine now. I also had it painted and installed new Lexan window in the sliding door. I have some manuals but I have to stop short of saying"all" because I don't know what came with it in 1985. There is a book on operation and programming that I found very helpful. I had to learn how to use it the hard way since no training was provided. However. I have notes on things like setting tool offsets and DNC operations that I will gladly share.with the buyer. Loading may be a problem. I do not have a dock nor a forklift that can lift it. When I installed it into my shop. I rented a forklift for a day and that was failrly expensive. I can get the machine to my 8' w
|
|
|
1-1/2" MORI SEIKI SL6 TURNING CENTER ID TURRET TOOL BLOCK
MORI SEIKI TURRET TOOL BLOCK FROM MODEL SL6 CNC TURNING CENTER 1-1/2" BORE Good used condition. As pictured. Feel free to give us a call at 440-343-4419 for more information to be sure that these will work for your application. Payment due within seven days of purchase. Check. M/o, and PayPal accepted. $11.50 for USPS Priority Mail shipping with delivery confirmation. Thanks for looking!
|
|
|
South Bend Fourteen 14 x 36 Engine Lathe QC Tool Post 8"Chuck Logan Craftsman
I apologize for the quality of the pictures.There is another lathe sitting in front of this machine This is a nice South Bend"Fourteen" Lathe. It is a 14 x 36 lathe with 8" 3-Jaw Chuck and Armstrong Quick Change Tool Post. We have powered it up and it sounds good and everything seems to work as it should. Handles turn smoothly and not an excessive amount of backlash. It is wired for 230 volt/ 3 phase electric. There is some wear on the ways but nothing excessive. Loading at our facility is free of charge. Buyer pays all shipping. Ohio Sales Tax Rules Apply. Payment must be received within 5 days of close of sale. Sold AS IS.
|
|
|
ATLAS 12*24 METAL TURNING LATHE w ACCESSORIES, COMBO CROSS-FEED, 3-JAWED CHUCK
ATLAS 12*24 METAL TURNING LATHE w ACCESSORIES. COMBO CROSS-FEED, 3-JAWED CHUCK 110 v MOTOR. TAILSTOCK w LIVE CENTER, THREAD FEED, VGC. PICK-UP ONLY- IN NORTH-CENTRAL WEST VIRGINIA. I WILL NOT SHIP THIS. THIS PARTICULAR LISTING IS FOR A VINTAGE ATLAS 12/ 24 METAL LATHE IN VERY GOOD. USED CONDITION. I HAD IT RE-BUILT WHEN I PURCHASED IT(USED) BACK IN THE 1970s. I DOUBT IF I PUT 10 HOURS ON IT SINCE THEN. DETAILS: CAPACITY- 12" SWING BED LENGTH 24" 110 v/ 220 v MOTOR w/ ADDED SWITCH BOX THREE-JAWED SYNCHRONOUS CHUCK COMPOUND ADJUSTMENT ON TOOL HOLDER BAR MICROMETER TYPE DIALS ON TOOL BARS LOCKING TAIL-STOCK for MORSE TAPER TOOLING MORSE TAPER LIVE CENTER CLUTCH LEVER(ON DRIVE BELT) FULL LENGTH THREADING DRIVE ALL GEARS AND BELTS ARE IN GREAT CONDITION. WAYS ARE TRUE AND SQUARE WITH MINIMAL WEAR. HEAVY-DUTY STEEL STAND w CABINET for ... moreTOOLING SEVERAL STEEL AND CARBIDE CUTTERS THIS UNIT IS(WAS) IN GOOD RUNNING ORDER WITH NO KNOWN LIMITATIONS(OTHER THAN PHYSICAL LENGTH AND SWING LIMITS) A GREAT LATHE FOR THE HANDYMAN OR FARM-RELATED APPLICATION. THIS LATHE WAS RECENTLY DIS-ASSEMBLED AND REMOVED FROM MY HOUSE DUE TO SPACE REQUIREMENTS. IT IS AVAILABLE FOR PREVIEW IN ITS DIS-ASSEMBLED STATE IN STORAGE. IF SO INCLINED. NORTH-CENTRAL WEST VIRGINIA- 2 MILES OFF INTERSTATE I-79. I WILL OFFER FREE STORAGE FOR UP TO 2 MONTHS TO ALLOW FOR YOUR PICK-UP(IF NEEDED) PAYMENT THOUGH IS EXPECTED AT END OF THE AUCTION. WINNER SHOULD BRING HELP WHEN PICKING UP- IT WILL TAKE TWO MEN TO LOAD THE 2 LARGE PIECES. PAYMENT IS EXPECTED WITHIN 24 HOURS UNLESS YOU HAVE CONTACTED ME TO MAKE OTHER ARRANGEMENTS. I AM WILLING TO WORK WITH YOU AS LONG AS YOU COMMUNICATE WITH ME. IF YOU HAVE NOT PAID- OR CONTACTED ME- WITHIN 4 DAYS. AN UNPAID ITEM CASE WILL BE OPENED. PLEASE REVIEW THE PHOTOGRAPHS FOR ADDITIONAL INFORMATION THEY ARE SUPPLIED TO PROVIDE A VISUAL DESCRIPTION TO ADD TO THE VERBAL DESCRIPTION THAT I PROVIDED. BY BIDDING ON THIS ITEM,
|
|
|
LOCAL PICKUP AS IS Delta Industrial 46-460 1 Midi Lathe 1725 RPM Motor
ebay template LOCAL PICKUP AS IS Delta Industrial 46-460 1 Midi Lathe 1725 RPM Motor. Click for more Pictures LOCAL PICKUP AS IS Delta Industrial 46-460 1 Midi Lathe 1725 RPM Motor Brand: Delta. Model: 46-460. Features: Powerful 1 hp max. 1,725 rpm motor Large 12-1/2-inch swing capacity provides the largest capacity in its class Electronic variable Speed with three-pulley speed ranges provide the required speeds needed to turn a project without changing belt position Forward and Reversing function allows the turner to achieve a superior finish. Sanding a turned piece with the grain causes the wood fibers to lay down and remain rough. Patented belt tensioning system for easy and quick speed changes and sets the belt at the correct tension every time for maximum power transfer and longer tool life Condition: Open box. Item will not power on, ... morethere are serious damages on the power supply box(cracked plastic and dangling components) What you get: DELTA lathe and parts shown on images. Parts/accessories not shown are not included with this listing. Retail value: $1119.99. THIS IS A LOCAL PICKUP ITEM. YOU OR YOUR PREFERRED SHIPPING CARRIER WILL HAVE TO PICK UP THE ITEM FROM OUR WAREHOUSE. Item location: Duluth GA. 30096. Item weight(pounds) 110. Item dimension(inches) 38 x 13 x 24. ITEM IS SOLD AS IS/FOR PARTS. NO RETURN/EXCHANGE/REFUND! ~Please review pictures for the actual item(s) What you see is what you get! ~Our listed products are 100% genuine. Specifics: Please look at manufacturer's website for product details* The digital images we display have the most accurate color possible. However. Due to differences in computer monitors, we cannot be responsible for variations in color between the actual product and what you see on screen. ~Pictures indicate actual item(s) Please click"enlarge" to see more pictures* JL& EE 100% Satisfaction Guarantee If there is an error between what you received and the listing. Feel free to contact us during our business hours and allow us to resolve your issues befo
|
|
|
1998 Tongil TC-20 8" Chuck,Fanuc 0t control
1998 Tongil ST-20 CNC Lathe Fanuc 0t control 8" Chuck VIDEO Heavy Duty Box Ways, 8 Station turret, Tailstock, 9" Machine Dia. 24" Between centers, 3500 RPM, Machine is very quiet and runs excellent! Made in Korea. Questions Call Steve@ 866-803-5202, Shipping Quotes contact Shipping Dimensions 8' L x 6' D x 5'H 8000lbs,
|
|
|
SuperMax 14" X 40" Geared Head Engine Lathe, 3 & 4 Jaw Chucks, Steady Rest
Here's a 14" X 40" Geared Head Engine Lathe with both Inch and Metric Threading that runs good. Is well equipped, and is ready to go to work. Now available for your inspection under power and/or purchase at our Warehouse in Beautiful Downtown Miamisburg. OH is this SuperMax Model LE 1338. 14" swing X 40" cc Geared Head Engine Lathe. S/N 18204-026, Manufactured New in 1993. This machine has great ways with a removable gap. We have run this machine through all speeds and feeds and find it to be in Good Operating Condition. Further. It is equipped with both Inch and Metric Threading, 7 3/4" 3) Jaw Chuck, 10" 4) Jaw, 4" Steady Rest, and a 5C Collet Drawbar. These SuperMax Lathes are Real Nice Geared Head Engine Lathes and this one is Very Well Equipped. Specifications are as follows: Specification Description ... moreDistance Between Centers, 40" Swing Over Bed, 14" Swing Over Cross Slide, 9" Swing In Gap, 21" Width of Gap, 9" Spindle Bore, 1 3/8" Spindle Nose, D1-3, Spindle Speeds(16) 35 RPM- 2.000 RPM Main Motor, 3 HP, Width of Bed Ways, Top Slide Travel, Cross Slide Travel, Tailstock Diameter, Tailstock Travel, Tailstock Morse Taper, Morse#3, Threading- Metric, Threading- SAE, Threading- Module, Threading- Diametral, Feeds- Metric(R10 Series) Feeds- SAE(R10 Series) Cross Feeds, Approximate Dimensions, 38" W x 76" L x 44" H Approximate Weight, 2.500 lbs. Equipped With: 7 3/4" 3) Jaw Chuck 10" 4) Jaw Chuck 5C Jacobs Quick Acting Collet Closer Threading Dial 4" Steady Rest Jacobs Chuck for Tail Stock(4) Way Tool Block Carrage Stop Foot Brake You can see this lathe under power at our Warehouse in Beautiful Downtown Miamisburg. OH by calling Andy or myself for inspection(see phone numbers below) This is SuperMax Geared Head Engine Lathe built with a whole lot of quality in Tiawan. Overall. A Good Operating Engine Lathe that is very well equipped and ready to go to work. The appearance speaks for itself(see photo's) If you nee
|
|
|
MONDIAL 14" x 40" GEARED HEAD ENGINE LATHE - #GALLIC 14 - NICELY TOOLED
aims MONDIAL 14" x 40" GEARED HEAD ENGINE LATHE- GALLIC 14- NICELY TOOLED read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST If the player doesn't work: Made by Mondial. This is a used Geared Head Engine Lathe in GREAT condition. Model# Gallic 14 Serial# RG14670430H5 Features: Burnerd 8" Three-Jaw Chuck. 12" Faceplate. Geared Head. Steady Rest. Coolant System. Adams Pneumatic Collet Closer. Trav-A-Dial on Carriage. Specifications: Swing: Swing Over Bed: 14" Swing Over Cross Slide: 8" Swing Over Compound Slide: 3" Capacities: Distance from Floor to Center: 42-1/2" Distance Between Centers: 40" Spindle: Mount: L0 Spindle Bore: 2" Number of Spindle Speeds: 16 Range of Spindle Speeds: 40 to 2.000 rpm. Threads& Feeds: Inch Threads: 23/32- ... more64 TPI Metric Threads: 0.45- 16 mm. Carriage: Cross Slide Travel: 8" Compound Rest Travel: 5" Tailstock: Spindle Travel: 5" Taper of Center: 4 Morse Taper Spindle Diameter: 2-1/8" Bed: Width of Bed Face: 11" Length of Bed: 61" General: Electrical: 220 Volt. Three Phase, 60 Hz Overall Dimensions: 86" x 34" x 58" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. MONDIAL 14" x 40" GEARED HEAD ENGINE LATHE- GALLIC 14- NICELY TOOLED MONDIAL 14" x 40" GEARED HEAD ENGINE LATHE- GALLIC 14- NICELY TOOLED MONDIAL 14" x 40" GEARED HEAD ENGINE LATHE- GALLIC 14- NICELY TOOLED MONDIAL 14" x 40" GEARED HEAD ENGINE LATHE- GALLIC 14- NICELY TOOLED MONDIAL 14" x 40" GEARED HEAD ENGINE LATHE- GALLIC 14- NICELY TOOLED MONDIAL 14" x 40" GEARED HEAD ENGINE LATHE- GALLIC 14- NICELY TOOLED MONDIAL 14" x 40" GEARED HEAD ENG
|
|
|
1997 Haas VF-3 10K rpm,p-cool,auger,wired 4th,etc. "VIDEO"
1997 Haas VF-3 Excellent Condition! Cut Only Wood Its Whole Life, Original Paint. Video Questions Call Steve@ 866-803-5202, Shipping Quotes Contact Specification Description DATE OF MANUFACTURE, 1997, TABLE SIZE, 48" x 18" MAX. TABLE LOAD(EVENLY DISTRIB. 3.500 LBS, SPINDLE NOSE TO TABLE TOP, 4" 29" X AXIS TRAVEL, 40" Y AXIS TRAVEL, 20" Z AXIS TRAVEL, 25" RAPID TRAVERSE RATE ALL AXES, 710 IPM, CUTTING FEED RATE ALL AXES, 0.1- 300 IPM, SPINDLE SPEEDS(2 SPEED GEARED) 0- 10.000 RPM, SPINDLE TAPER, CAT 40, SPINDLE MOTOR, 20 HP, TOOL CHANGER CAPACITY, 21 STATIONS, MAX. TOOL WEIGHT, 12 LBS, APPROX. DIMENSIONS, 126" x 111" x 115" APPROX. WEIGHT, 13.000 LBS, Equipped With: HAAS 32-BIT CNC CONTROL WITH 14" CRT SCREEN RS-232C PORT INTERFACE FOR DNC OPERATION RIGID TAPPING(SYNCHRONOUS/ SOLID TAPPING) ... moreCHIP REMOVAL AUGER. PRE-WIRED FOR 4TH AXIS. QUICKCODE PROGRAMMING SYSTEM PROGRAMMABLE COOLANT. REMOTE JOG HANDLE GEAR BOX. FLOPPY, 1000 BLOCKS/PER SECOND CUSTOM MACROS. STANDARD COOLANT SYSTEM WITH TANK& PUMP FULLY ENCLOSED GUARDS. ALL AVAILABLE MANUAL
|
|
|
Optimum 14'' x 40'' Lathe w/ 3 Axis DRO 3 Phase
This is an Optimum(brand) industrial lathe. They are sold by Grainger. It has a three axis DRO. It is in excellent condition. It was manufactured in 2010. It comes with accessories. 3 and 4 jaw D1 cam lock chucks, follower rest, steady rest, etc. Pickup preferred. Freight might be arranged. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Enco 12x36 Metalworking Engine Lathe with DRO Plus Addl Accessories
Enco 12x36 Metalworking Lathe. Similar to Grizzly Industrial G4003) In addition to all of the standard accessories there are a couple of special accessories included. See Special Accessories list below. Works great. Regular maintenance has been kept up on this lathe. The standard lathe start/stop switch malfunctioned and start/stop/reverse function was relocated to a switch panel on the headstock. The mechanical parts of the start stop level on the carriage still work. Only the electrical part of the switch malfunctioned. To fix the lever actuated start stop function, a new switch is available from Enco. Special Accessories: DRO Pros 2-Axis Digital Read Out, 6" Adjustable Runout 3-Jaw Self-Centering Chuck, 5C Collet Closer w/ Full Set of 5C Collets, Latheguard Lexan Safety Shield, Magnetic coolant nozzle(does not include pump) with drains ... moreand coolant return installed in chip tray. Standard Accessories& Features: 6" 3-Jaw Chuck, 7" 4-Jaw Chuck, Face Plate Follow Rest, Steady Rest, 1-1/16" Capacity 4-Way Toolpost, Chip Pan, Metric Change Gears, Threading Dial, Removable Gap Bed, Quick Change Gear Box for Spindle Speed, Quick Change Gear Box for Lead and Feed Speeds, Includes 5MT to 3MT Adapter for Spindle Bore, Includes Two 3MT Dead Centers Specs: Swing Over Bed: 12" Swing Over Gap: 17" Length of Gap: 9" Swing Over Cross Slide: 7.5" Swing Over Compound: 3" Distance Between Centers: 36" Carriage Travel: 30" Long. Feed Range: 0.0011" 0.0311" per rev. Inch Threads: 40 Threads possible between 4 TPI and 112 TPI, Metric Threads: 29 Threads possible between 0.24mm- 4.5mm, Cross Slide Travel: 6.5" Cross Slide Feed Range: 0.0015" 0.0302" per rev. Compound Travel: 2.625" Tailstock Spindle Travel: 3.625" Tailstock Taper: 3MT, Spindle Nose Mounting: D1-4, Spindle Bore Dia: 1.5" Spindle Taper: 5MT, Spindle Taper Adapter: 3MT, Spindle Speeds: 18 speeds from 60RPM to 1550RPM, Motor: 110VAC/220VAC 1.5HP 1-phase(Wired for 220VAC/ Can
|
|
|
2010 Chiron FZ 12S Low Hours 5 Axis Vertical Machine CNC FZ12 FZ12S
Chiron FZ-12S Vertical Seven Axis Machining Center ONLY 1.617 Hours of Run Time. Options purchased with this machine: 32 HP HSK Tooling 48 Tools Instead of 24. Increased Spindle Speed of 24.000 rpm, Fixture Washing. Auto Lube. 65mm Lathe Spindle. NC Feeding Unit as Bar Feeder. NC Turning Unit w/ Hydraulic Clamping Vice. Renishaw Probe OMP 40-2LS for Automatic Measuring. Chiron Lasercontrol 40 for Auto Tool Breakage, Length Measurement and Temperature Compensation. Mist Collection Unit w/ Special Exhaust Cover. Coolant Manifold Modification to Support Air, Machine can be Run Wet Or Dry. Glass Scales on X. Y, Z Axis Standard. For More Information or To Inspect Please Call Maury Cohn 1 800 888 4312 e5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-13f05f9c50b-0xfe-
|
|
|
EMCO-UNUMAT VINTAGE MODEL SL DB 200 LATHE & ACC & BOOK-WATCHMAKER JEWELER WOOD
UP FOR AUCTION IS THIS VINTAGE EMCO-UNIMAT MODEL SL DB 200. THIS UNIT HAS A BROKEN MOTOR MOUNT ONTO THE PULLEY. LOOKS LIKE A REPLACEMENT PART CAN FIX THE POT METAL BRACKET, THIS UNIT RAN GREAT BEFORE THE BRACKET BROKE. THIS UNIT HAS WEAR FROM USE AND SOME ACC'S AND THE ORG OPERATING INSTRUCTIONS MANUAL. IAM SELLING THIS VINTAGE EMCO AS-IS FOR PARTS ONLY. PLEASE LOOK AT ALL OF THE PICTURES THEY TELL THE STORY. BUYER TO PAY SHIPPING. PAYPAL ONLY.
|
|
|
TACCHI CNC BED TYPE BORING LATHE MODEL HD1200 QUOTE# SAM264
QUOTE# 264 56" x 221" 18'5" TACCHI"HD1200" CNC BED TYPE BORING LATHE Serial No. 147556. Model HD1200 EQUIPPED WITH: Siemens Sinumerik System#3 CNC Control 8-Position Vertical Turret 39" 4-Jaw Chuck- Heavy-Duty Steady Rests Tailstock- Chip Conveyor CATALOGUE SPECIFICATIONS: Spindle Bore. Diameter. 5" Chuck Diameter. 39" Swing. Maximum. 56" Distance Between Centers. 221" Spindle Speeds. Range. 26.6 to 720 RPM. NOTE: Machine Appears To Be In Very Good Conditon And Can Be Shown In Plant For A Short Period Of Time. Machine Is Capable Of Both Turning And Deep Hole(I.D. Boring Of Precision Parts. PRICE: BEFORE REMOVAL OHIO(CLEVELAND) $125.000.00. PRICE: AFTER REMOVAL OUR WAREHOUSE. $179.500.00. ALL MACHINES/EQUIPMENT SUBJECT TO PRIOR SELL.
|
|
|
Tacchi Hollow-Spindle CNC Adjustable-Gap Bed Type Boring Lathe Model#HS1200
36/155" x 295" 24.5' TACCHI"HS1200" HOLLOW-SPINDLE CNC ADJUSTABLE-GAP BED TYPE BORING LATHE Serial No. 147569. Model HS1200 EQUIPPED WITH: Siemens Sinumerik System#3 CNC Control 8-Position Vertical Turret 39" 4-Jaw Chuck- Heavy-Duty Steady Rests Tailstock- Chip Conveyor CATALOGUE SPECIFICATIONS: Spindle Bore. Diameter. 8.75" Chuck Diameter. 39" Swing Over Gap. Maximum. 155" Swing Over Cross Slide w/Gap Open. 36" Swing Over Top Of Carriage. 17.94" Gap Width. 59" Distance Between Centers. 295" Spindle Speeds. Range. 26.6 to 720 RPM. Boring Bar Capability. 10" Tool Shank Size. 1.5" x 1.5" x6" NOTE: Machine Appears To Be In Very Good Conditon And Can Be Shown In Plant For A Short Period Of Time. Machine Is Capable Of Both Turning And Deep Hole(I.D. Boring Of Precision ... moreParts. PRICE: BEFORE REMOVAL OHIO(CLEVELAND) $145.000.00. PRICE: AFTER REMOVAL OUR WAREHOUSE. $179.500.00.
|
|
|
1992 Citizen E16J Dual Spindle Dual Turret Swiss CNC Lathe
Machine is in good working condition and is currently under power and available for demonstration. 16 mm max bar diameter. 10,000 rpm primary spindle, 8000 rpm sub-spindle, two 10 station turrets all of which are live tool capable. Some OD tooling and bushings are included. I can provide transport to greater Seattle area if necessary. Buyer must provide suitable forklift for unloading at destination. Watch this video to see the machine make a part: Contact me for more information.
|
|
|
TACCHI HOLLOW SPINDLE CNC ADUSTABLE GAP BED
SAM 262. 36/155" x 295" 24.5' TACCHI"HS1200" HOLLOW-SPINDLE CNC ADJUSTABLE-GAP BED TYPE BORING LATHE Serial No. 147569. Model HS1200 EQUIPPED WITH: Siemens Sinumerik System#3 CNC Control 8-Position Vertical Turret 39" 4-Jaw Chuck- Heavy-Duty Steady Rests Tailstock- Chip Conveyor CATALOGUE SPECIFICATIONS: Spindle Bore. Diameter. 8.75" Chuck Diameter. 39" Swing Over Gap. Maximum. 155" Swing Over Cross Slide w/Gap Open. 36" Swing Over Top Of Carriage. 17.94" Gap Width. 59" Distance Between Centers. 295" Spindle Speeds. Range. 26.6 to 720 RPM. Boring Bar Capability. 10" Tool Shank Size. 1.5" x 1.5" x6" NOTE: Machine Appears To Be In Very Good Conditon And Can Be Shown In Plant For A Short Period Of Time. Machine Is Capable Of Both Turning And Deep Hole(I.D. Boring ... moreOf Precision Parts. PRICE: BEFORE REMOVAL OHIO(CLEVELAND) $145.000.00. PRICE: AFTER REMOVAL OUR WAREHOUSE. $179.500.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
|
|
|
CLEAN!! ACRA TURN 13" x 40" GEARED HEAD GAP BED ENGINE LATHE - #LC-1340G
aims CLEAN! ACRA TURN 13" x 40" GEARED HEAD GAP BED ENGINE LATHE- LC-1340G read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST If the player doesn't work: Made by Acra Turn. This is a used Geared Head Gap Bed Engine Lathe in EXCELLENT condition. Model# LC-1340G Serial# 1206 Features: Geared Headstock. Induction Hardened Bedways. Gap Bed. 6" Three Jaw Chuck. 8" Four Jaw Chuck. Phase II Quick Change Tool Post& Holders. Steady Rest. Follow Rest. 8" Fixture Plate. 12" Face Plate. Coolant System. 220 Volt. Single Phase. Inch& Metric Threads. Specifications: Swing: Swing Over Bed: 13" Swing Over Cross Slide: 8" Swing Over Compound Slide: 3" Swing Over Gap: 17" Capacities: Distance from Floor to Center: 42" Distance Between Centers: ... more40" Spindle: Mount: D1-5 Spindle Bore: 1.49" Number of Spindle Speeds: 18 Range of Spindle Speeds: 60 to 2.000 rpm. Threads: Inch Threads: 4.75 to 72 tpi Metric Threads: 0.25 to 9 mm Module Threads: 0.25 to 3.5 Diametral Threads: 11 to 108. Carriage: Cross Slide Travel: 7" Compound Rest Travel: 3-1/4" Tailstock: Spindle Travel: 4" Taper of Center: 3 Morse Taper Spindle Diameter: 1-9/16" Bed: Width of Bed Face: 7-3/8" Length of Bed: 50-3/4" with 7-1/4" gap. General: Motor: 2 Horsepower. 110/ 220 Volt, 1,700 rpm, 25/ 12.5 Amp, 60 Hz Electrical: 110/ 220 Volt. Single Phase(Currently wired@ 220 Volt, Single Phase) Overall Dimensions: 72" x 30" x 50" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. CLEAN! ACRA TURN 13" x 40" GEARED HEAD GAP BED ENGINE LATHE- LC-1340G CLEAN! ACRA TURN 13" x 40" GEARED HEAD GAP BED ENGINE LATHE- LC-1340G C
|
|
|
Mazak Slant Turn 25-ATC CNC Lathe
We are selling this Mazak Slant Turn 25-ATC CNC Lathe. It has a Mazatrol Control. The machine is a Live Tooling CNC Lathe with a Tailstock and steadyrest. The machine is in Excellent Condition. There is allot of other tooling going with it. Themanuals are going with it also. I will have more photos to post shortly. Buyer is respondsible for loading. E-mail me at CNCMachining90@comcast.net or through E-bay if you have an questions. Machine is being sold as is. Where is.
|
|
|
Used HYUNDAI Model HiT-8S CNC Turning Center, Siemens controller, some tooling
This auction is for the following used machine: One(1) Preowned HYUNDAI Model HiT-8S CNC Lathe S/N 5-288(Reportedly new 1996) 2-Axis Machine 11.81” Swing Over Bed 6.3” Maximum Cutting Diameter 11.22” Maximum Cutting Length 11.81” Maximum Between Centers 3.93” X-Travel 11.42” Z-Travel Variable Spindle Speeds: 60 to 6.000 RPM 8-Position Turret Equipped with: Siemens CNC Controller. Collet Chuck, Coolant System This is a complete machine. With 3 Phase motors and electrical controls. Whatever turret tooling is shown in photo will be included. Machine has a tool setter. But we can not confirm functionality, condition, or fitness of purpose. Machine will be sold"FOB Minnepolis. MN(area) Payment must be made in full and certified funds prior to loading of machine. We are happy to work with you to make shipping arrangements via a carrier suited ... moreto move this type of computerized machinery. E-mail seller with any questions. We'll try to help. 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-13f1194cb4f-0xfd-
|
|
|
WEILER SECOND OPERATION LATHE OR TOOL ROOM LATHE
WEILER SECOND OPERATION LATHE OR TOOL ROOM LATHE 240 VOLT SINGLE PHASE! COMES WITH COMPOUND SLIDE TH This sale is for 1 GERMAN MADE SECOND OPERATION SPEED LATHE OR USE AS A SMALL TOOL ROOM LATHE. 2 MACHINES IN ONE THIS MACHINE IS LOADED WITH ACCESSORIES. SET UP FOR 220 VOLT SINGLE PHASE. THIS IS GREAT FOR A HOME SHOP LATHE IT HAS A FULL SET OF ACCESSORIES INCLUDING: SHOP ADAPTED CROSS SLIDE WITH COMPOUND USE AS A TOOL ROOM LATHE• ALSO COMES WITH SPEED LATHE CROSS SLIDE WITH SPEED HANDLE• ROTARY SPEED LATHE TAIL STOCK. 8" SWING. C-5 3" 3 JAW CHUCK. 4 WAY TOOL POST. 2" DIAL INDICATOR. LOW AND HIGH SPEED• QUICK CHANGE SPEED COLLET• COLLET RACK. SEE PHOTOS OF ACCESSORIES VERY CLEAN RUNS WELL CURRENTLY WORKING AND UNDER POWER. WE CAN COORDINATE SAME DAY PICK UP IF YOU NEED A REPLACEMENT MACHINE RIGHT AWAY. USE EBAY FREIGHT QUOTE ... moreFOR FREIGHT THIS MACHINE RUNS ON 240 VOLT 3 PHASE IT IS CURRENTLY RUNNING ON 240 VOLT SINGLE PHASE WITH A SMALL CONVERTER WE CAN INCLUDE THE CONVERTER FOR AN ADDITIONAL $150.00 COMES AS SHOWN IN PHOTOS. See photos for best description ready to go to work! LOCAL PICK UP WAREHOUSE FEE $50.00 ALL WILL CALL ITEMS NO EXCEPTIONS. NOT REQUIRED ON ITEMS SHIPPED BY COMMON CARRIER) 24 HOUR NOTICE REQUIRED FREE STORAGE ONCE PAYMENT IS RECEIVED UP TO 30 DAYS ON ALL ITEMS. local pick up fee of $50.00 is paid directly in Cash to the warehouse fulfillment company one fee per visit up to 2000 lbs Forklift loading included. multiple orders per visit ok HEAVY LIFT FORK LIFT LOADING FEE IF NEEDED $150.00(over 2000 lbs up to 6000 lbs) THIS ITEM IS ON A PALLET IF YOU REQUIRE CRATING CHARGE FOR THIS ITEM TO CRATE IS $150.00. Feel free to submit any questions via Ebay messaging we usually get back to you within 24 BUSINESS hours. TERMS. DELIVERY, LOCAL PICK-UP: EMERGENCY DELIVERY CAN BE COORDINATED WE CAN QUOTE FREIGHT FOR YOU Crating Service available if required World W
|
|
|
2007 DMG Sprint 65-3 Linear CNC Lathe 3 turrets Live Tools
2007 DMG Sprint 65-3 Linear CNC Lathe Max. Bar Diameter: 2.8" 3.5" Chuck Diameter: 6.9" Spindle Nose: 5.5" Max. Rotational Speed: 5.000 RPM Power(S6: 25% S1) Siemens: 32.2/ 29.5 HP Counter Spindle: Max. Bar Diameter: 1.8" Chuck Diameter: 6.9" Spindle Nose: 5.5" Max. Rotational Speed: 5.000 RPM Power(S3 25% S1) Siemens: 33.5/ 22.8 HP Axes: Max. Rapid Traverse of Axes: 1181.1 IPM Max. Axes Acceleration: 196.9 IPS Path X1: 6.5" Path Z1: 8.7" Path X2: 6.5" Path Z2: 5.9" Path X3: 6.5" Linear) Path Y3: 3.1" 2.0" +1.2" Path Z3: 25.6" Path W2: 27.2" Turret: Number of Turrets: 3 Tool Stations per Turret: 12 Driven Stations: 12 Diameter of the Tool Holder(DIN 69880) 30 Max. Rotational Speed of Driven Tools: 4000 RPM Power(S3 25% S1) 7.4/ 3.4 HP General: Weight: 22.928 ... moreLbs Equipped With: Siemens 840D Control IEMCA VIP 80r E-11 Bar Loader(6 foot) Spindle Liner Software for tool life monitoring only for CNC Artis Chipblaster High Pressure Pump Powertools Software Chiller for the coolant Assorted Tooling(Original cost- $145.000) Schunk Chuck(high precision) Chip Conveyor Comments: It has been lightly utilized and has primarily been machining aluminum since new. New replacement cost($340.000) plus tooling($145,000) = $485,000 Machine On Hours- 4852 Machine Working Hours- 1646. Price: $259.500 FOB Truck Pennsylvania Thank you, Maury Cohn 5 attachments— Share all images DMG Sprint 65-3 Linear CNC Lathe 01.jpg 30K Share DMG Sprint 65-3 Linear CNC Lathe 03.jpg 28K Share DMG Sprint 65-3 Linear CNC Lathe 08.jpg 40K Share DMG Sprint 65-3 Linear CNC Lathe 11.jpg 49K Share DMG Sprint 65-3 Linear CNC Lathe 16.jpg 38K Share 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13f126d3438-0x102-
|
|
|
TWO Brown & Sharpe PTC-60 2 3/8" Cap. CNC Bar & Chucker Machines
TWO BROWN& SHARPE PTC-60 2 3/8" CAPACITY BAR& CHUCKER 6 1/2" CAPACITY PROGRAMMABLE TURNING CENTERS Serial Number 550-2-443-60 Year Approximately 1984 Serial Number 550-2-237-60 Year Approximately 1979 KGN CNC Allan Bradley PC Based CNC Controls. Newest Machine has Angle Slide Attachment(See Photo) Plus Four Side Slides, 8 Hole Turret W/7" Travel, Deep Hole Extra, Fullsize CRTS, Load Meter, 10 H.P. Motors& Controls, 220/440, 3 Phase, Bar Stock Stands& Tubes for Both Machines, Tool Holders& Turret Tools(See Photo) Both Machines, Coolant System. FORMING/CUT-OFF SLIDE: Maximum Radial Travel 3 1/2" Longitudinal Adjustment Pos. 1, 3& 4, 4" Pos.2, 2 1/2" Feed Rate Maximum 30/min. Minimum.15/min. Rapid Travel Rate 300/min. LONGITUDINAL TURNING ARRANGEMENT: Maximum Radial Travel 3 1/2" Maximum ... moreLongitudinal Travel: Position 1& 4, 6" Position 3, 4 1/2" Feed Rate Maximum 20/min. Minimum.1/min. Rapid Travel Rate 300.min. HYDRAULIC TRACING ARRANGEMENT: Maximum Radial Travel 3 1/8" Feed Rate Maximum 20/min. Minimum.1/min. Rapid Travel Rate 300/min. SINGLE POINT THREADING ARRANGEMENT: Maximum Radial Travel 3 1/2" Maximum Longitudinal Travel 3 1/2" Screw Pitch Range 8-100 Threads/Inch(23mm-3mm Pitch) HYDRAULIC/LUBRICATING SYSTEM: 20 Gallons Capacity. Hydraulic Motor 5 H.P. COOLANT SYSTEM: 23 Gallon Capacity. 1/8 H.P. also has Many Tool Holders, 1-3 Jaw 6" Chuck and Change Gears for both machines and Feed Tube in Spindle. Approximate Weight 10.000 Lbs. 104" Long, 52" Wide, 7'6" Tall, Plus 12' Stock Stand and Tubes for Each Machine. Must Move. 5 Day Pick-up. Buyer is buying these under scrap at this point. Machines would part out for many times my starting bid. Comes with one new Bull Gear Assembly Drive with Clutches. Last owner paid $12.900. New in 1989. If you have no feedback pleace call to arrange financial quarantees. PTC Standard Features Include: Universal Spindle which accommodates Bar or Chucking Equipment.
|
|
|
NICE!! MONARCH 12.5" x 20" VARIABLE SPEED TOOLROOM LATHE - #EE
aims NICE! MONARCH 12.5" x 20" VARIABLE SPEED TOOLROOM LATHE- EE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Monarch Machine Tool Co. This is a used Variable Speed Toolroom Lathe in GREAT condition. Model# EE Serial# 47389 Features: Variable Speeds. Dial Speed Indicator. Coolant System. 5C Nose Piece. Lever Collet Closer. Steady Rest. Taper Attachment. Specifications: Swing: Swing Over Bed: 12-1/2" Swing Over Cross Slide: 7-1/2" Swing Over Compound Slide: 2-1/2" Capacities: Distance from Floor to Center: 45-1/2" Distance Between Centers: 20" Spindle: Mount: D1-3 Spindle Bore: 1-3/8" Number of Spindle Speeds: Infinitely Variable Range of Spindle Speeds: 50 to 4.000 rpm. Threads: Inch Threads: 3- 184 tpi. Carriage: Cross Slide Travel: 8-1/2" ... moreCompound Rest Travel: 3" Tailstock: Spindle Travel: 3-1/2" Taper of Center: 2 Morse Taper Spindle Diameter: 1-1/4" Bed: Width of Bed Face: 10-1/2" Length of Bed: 38-1/2" General: Motor: Believed to be 5 Horsepower Electrical: 230 Volt. Three Phase Overall Dimensions: 71" x 31" x 51" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NICE! MONARCH 12.5" x 20" VARIABLE SPEED TOOLROOM LATHE- EE NICE! MONARCH 12.5" x 20" VARIABLE SPEED TOOLROOM LATHE- EE NICE! MONARCH 12.5" x 20" VARIABLE SPEED TOOLROOM LATHE- EE NICE! MONARCH 12.5" x 20" VARIABLE SPEED TOOLROOM LATHE- EE NICE! MONARCH 12.5" x 20" VARIABLE SPEED TOOLROOM LATHE- EE NICE! MONARCH 12.5" x 20" VARIABLE SPEED TOOLROOM LATHE- EE NICE! MONARCH 12.5" x 20" VARIABLE SPEED TOOLROOM LATHE- EE NICE! MONARCH 12.
|
|
 |