|
Hardinge CNC 2 H+ Chucker Lathe Super Precision--includes tooling
The machine is a Hardinge CNC 2 H+ Chucker Lathe Super Precision. Good shape. Runs fine. The year of manufacture was 1989, and the serial number is CM-2667-F. I am asking $10,500. It also comes with tooling shown. Pick up only. Call 408-844-8289. Ask for Aaron, or email aaron@tmk-inc.com with your contact number.
|
|
|
1996 HYUNDAI 18-S BIG BORE SPINDLE CNC LATHE LOCATED IN SENORA MEXICO
1996 HYUNDAI 18-S BIG BORE CNC LATHE. AS TAKEN FROM SERVICE AT CHAMPION MACHINE IN DETROIT. MACHINE IS NOW LOCATED IN SENORA MEXICO. GOOD DEAL IF YOUR IN MEXICO AS CNC MACHINES ARE HARD TO FIND DOWN SOUTH. IF STATESIDE CAN HAVE TRANSPORTED TO USA BORDER IN NOGALES. AZ. SIEMENS CONTROL, COLLETS, BIG BORE SPINDLE, 2-3/4 BORE, HARD TO FIND. POWER TAILSTOCK, 8 POSITION TURRET, TOOL SETTER, 17"+ SWING, 24" CENTERS. CHIP CONVEYOR. EMAIL ANY QUESTIONS. WE CAN LOAD. CHECK SIMILAR YEAR AND MODEL 18-S HYUNDAI CNC TURN CENTER, AS THEY GO EASY FOR $20K+
|
|
|
Wasino 103m Cnc Lathe With Milling
Wasino Lathe with milling. In good running condition. has extra live tools. Radial and Axial. 3" bar cap. Chip conveyor. Fanuc control. I have a 2nd available. Sold As Is See In Tulsa. Call 918-894-8001 For quote on Freight and Rigging. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-141ece850e3-0x104-
|
|
|
Yang Model SML-20 2-Axis CNC Lathe
Lathe: Yang Model SML-20 2-Axis CNC Lathe Specification Description Maximum Cutting Diameter, 7.87" Maximum Turning Length, 20" Maximum Swing, 18.9" Rapid Traverse, 1181 IPM, Spindle Motor 30 Min. Cont. 10 HP/ 7.5 HP, Spindle Nose/ Spindle Bore, A2-6" 2.44" Spindle Speed, 4500 RPM, Tailstock Quill Dia. Center, 2.56" MT#4, Turret Type, 8-Position, X-Axis Travel, 6.93" Z-Axis Travel, 20.47" Chuck Size. Hydraulic, 8" Bed Angle, 45 Degree, Maximum Bar Capacity, 1.97" Tailstock Body Stroke/ Quill Stroke, 16.73" 1.97" Machine Dimensions, 110" x 60" x 66" Machine Weight, 5830 lbs, Equipped With: Fanuc Model OTD CNC Controls. Hydraulic Collet Chuck With Large Assortment Of Collets. Hole Thru Cylinder. 8-Position Turret With ID And OD Tool Holders. Programmable Tailstock. Chip ... moreConveyor.
|
|
|
Tree cnc toolroom lathe
I purchased this machine 5 years ago to use in my home shop. It has been a great machine but is becomming tempermental. The mechanicals are great and will hold.0002 all day long. Unfortunatly I don't use it much anymore and has become troublesome when I try and use it and I have to end up reseating boards in order to run. It has a 8 position turret and it uses c-16 collets. I have many tool blocks and collets. I also have parts from a second lathe wiich is bassicly an entire machine accept the frame. I have ballscrews. Motors, turret, spindle housiing, electronics you name it I have it. Looking to get what its worth in weight. I hate to scrap it out becouse mechanically its awsome. It would be a great candidate for a mach 3 system.
|
|
|
1995 TSUGAMI MODEL S25D CNC SWISS AUTOMATIC SCREW MACHINE CNC LATHE
This is our machine. It is on our shop floor, we ran one part for several years. We do not have a bar feeder for it but it did have one on it when i purchased it. The machine is not under power but could be if you would like to come and run it. We do not have any one at our shop at this time that can run it. It was making medical parts when we took it out of service. The information below was information i found on the web so please ask if something doesnt look correct. We are not machine dealers so please ask any questions before bidding. The machine ran fine and made very nice parts. The spindles and live tooling all sounded good. There will be a 1,000 dollar deposit via pay-pal and balance will be wire transfer, bank check or cash at pick up. TSUGAMI MODEL S25D CNC SWISS AUTOMATIC SCREW MACHINE- 1995 Year of Manufacture: 1995 Manufacturer: ... moreTSUGAMI Model: S25D 1995 TSUGAMI MODEL S25D CNC SWISS AUTOMATIC SCREW MACHINE FANUC OTC CNC CONTROL- 5 AXIS BAR CAPACITY: 1" MAX. TURNING LENGTH: 8.25" MAX. DRILLING DIAMETER: 7/16" MAIN SPINDLE SPEED: 200-6300 RPM SUB-SPINDLE SPEEDS: 200-4000 RPM ROTARY TOOL SPEEDS: 200-4000 RPM MAX. SUB-SPINDLE CHUCKING DIA: 1" MAX. SUB-SPINDLE DRILLING DIA: 5/16" TOOLING SET UP; 3 LIVE/ 5-OD/ 3-ID/ 3 BKWRKG SPINDLE INDEXING: 24 POSITION MAIN MOTOR: 5-HP
|
|
|
RARE Emco Emcoturn 320 CNC Lathe Milling Machine Machining Haas
This item is for sale in the 48 continental states of the USA. It will not be shipped outside the US. This auction is for one partially retrofitted Emco Emcoturn 320 CNC Lathe. This machine was purchased used and partially retrofitted by us to run Mach 3 cnc program. We replaced nearly all of the wiring in the machine and replaced all of the pneumatic tubing. The machine currently has a 5C Collet nose and has a through spindle for bar feeding. The large lcd screen is a touchscreen. I also have some manuals and documentation for the machine. This machine sold for $60.000 new. The coolant pan was missing when we purchased it, so we copied the coolant pan from another Emcoturn 320 and made it in stainless. This machine has automatic lubrication system. The z-axis ballscrew is currently missing. I have two replacement ballscrews from another ... moremachine that have very few hours on them. I will include them so that you can reinstall the ballscrew. The turret is a high precision Sauter turret. The spindle is pneumatically actuated and the tailstock is pneumatic as well. I will also be including several other miscellaneous parts. Please check my other auctions as I have the bed, spindle, turret, tailstock core from another 320 available for sale. This machine has an automatic turret. Very nice! Contact me before bidding. The shipping estimate is incorrect. But I have to put something. This item weighs approx. 1700 lbs. and will need to ship by freight. Payment by cashier's check or company check preferred. Due to the price of this machine, we can't take paypal for it. There are too many people out there who use stolen credit cards and abuse paypal. Thank you. We are open to offers as well. Please message us. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-1420c6252a9-0xf8-
|
|
|
Haas GT-10 CNC Turning Center CNC Lathe (2010) from www.assetexchangeinc.,com
You are bidding on our absolutely mint Haas Model GT-10 2 Axis CNC Lathe with 8 position turret option new in(2010) Call or email us with any questions or to receive our video. 773-866-9600 Gregg. Scott, Mark or Manny or simply email: sales@assetexchangeinc.com Haas Model GT-10 2 Axis CNC Lathe(2010) 5" Chuck. 8 Position Turret, 3000 RPM, 7.5HP, 1.38" Bore, Haas CNC Control Specifications and Equipment Max Turning Diameter: 10" Max Cutting Length: 8" X-Axis Travel: 6" Z-Axis Travel: 8" Rapid Traverse Rates(X. Y) 710 IPM, Spindle Bore: 1.38" Spindle Nose: A2-5, Spindle Motor: 7.5 HP, Spindle Speeds: 3000, Equipped With: Coolant Pump. 8 Station Turret, 5" Pneumatic Chucking System, Rigid Tapping, Contact Us Call for more information: 773-866-9600. Ask for Mark. Scott, Steven or Manny,
|
|
|
Mazak QT-35N CNC Turning Center Chucker Lathe Mazatrol T32 12" 3 jaw Chuck Used
1994 Mazak QT-35N CNC Lathe Turning Center. Machine is in good running condition and can be seen under power as needed. Please contact Jason Stob 708 790-3358 Specifications: Control…Mazatrol T32-2 Max. Bar Capacity. 2.7" Chuck. 12” Max. Swing Over Bed. 20" Max. Cutting Length. 40” X Axis Travel. 11" Z Axis Travel. 41.3" Spindle Nose. A2-8 Spindle Bore. 3.15” Spindle Speeds. 3.000 RPM Spindle Drive Motor.30 HP Turret Positions.12 Tools Equipped With: Mazatrol T32-2 Control. 12" 3-Jaw Chuck. Tool Eye. Chip Conveyor. Misc. Tool Holders. FINANCING AVAILABLE! Please contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid ... morein full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 60007. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(52
|
|
|
IKEGAI FX 25 CNC LATHE 6 position well tooled with bar feed
IKEGAI FX 25. Has a 10 inch chuck& 5C collet closer Here are pictures of the tools it comes with: Also comes with a hydro bar feed: The hydro bar feed comes equipped with guide and feed tubes. ~12 feet long Can be seen under power in North Hollywood. E mail for directions CA You must pick the machine up and pay for labor to load it from North Hollywood upon winning the auction. No delivery. $200.00 loading fee or loaded by your own persons at no charge from us.
|
|
|
1988 MAZAK SLANT TURN 35 ATC/MC MULTI-AXIS CNC LATHE - NO RESERVE AUCTION
ID# 90255 Machine Specifications: Max Swing. 18.1" Max Cutting Diameter. 18.1" Max Cutting Length. 39.37" Spindle Bore. 3.15" Spindle Nose. A2-8. Spindle Speeds. 4- 2.200 RPM. Spindle Motor. 30 HP. X-Axis Travel. 13.2" Z-Axis Travel. 40.47" Rapid Traverse X. 393 IPM. Rapid Traverse Z. 590 IPM. Turret Positions. 16. Tailstock Quill Diameter. 3.34" Tailstock Center. MT# 4. Stroke of Tailstock Body. 40.47" Equipped With: Mazatrol T3 Control. Tool Eye. Machine Weight(Approx) 11.000 lbs Machine Location: Johnsburg. IL USA Additional Information: Machine can be seen under power. Terms and Conditions: All items are subject to prior sale. Payment due in full via bank wire within five(5) days of auction close. All items are sold"AS-IS. WHERE-IS" and with all faults. Buyer is responsible to coordinate ... morepick up with seller and buyer is responsible for all freight charges. Seller will prep item for shipment and load onto buyer's truck. Seller makes no guarantees regarding accuracy. Errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or conditions of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. Contact Information: Contact Sean Johnson 847-497-9800 for any questions and for payment detail.
|
|
|
1995 HAAS HL-2 CNC LATHE TURNING CENTER - FREE LOADING
YOU CAN REACH US AT 610-521-5080 WE WILL LOAD FOR FREE ON ANY OPEN TRAILER Make: Haas Model: HL-2 Swing Over Front Apron: 20" Swing Over Cross Slide: 9.5" Chuck Size: 8" Chuck: Kitagawa B208 Max Bar Capacity: 2" Distance Between Centers: 24" Max Cutting Diameter: 10" Max Cutting Length: 20" Spindle Speed: 3.750 RPM Spindle Motor: 15/20 HP Spindle Bore: 3" Draw Tube Bore: 2.06" X-Axis Travel: 8.45" Z-Axis Travel: 20" Rapid Traverse Rates: 710 IPM Tailstock Taper: MT4 Tailstock Travel: 20" Turret Positions: 10 Machine Weight: 8.000 Lbs We just picked this machine up from a local machine shop. They just replaced it with a larger machine. It was running the day it was disconnected. is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. ... moreWe are located next to the Philadelphia Air Port. I will be Happy to answer any questions you may have. Machine is being sold as is. The specs on this machine are subject to buyers inspection. Some of the specs we pulled from the internet of this same machine and year: We have Excellent feedback rating. Our goal is to keep you. Our customers satisfied. We can Deliver this Machine and place it on your shop floor if you are in a 4 hour range from Philadelphia for an additional Fee. We will Load this onto any truck or trailer for FREE. Cross country Transportation: You can get a great rate by calling 1-888-651-0566This is the Trucking company that we use. Please check out our other forklifts. Machinery, and accessorizes on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 lbs Industrial Plant Service Millwrights- Riggers- Plant Relocation- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT S
|
|
|
MIYANO BNC-34S CNC LATHE GE FANUC OT-Includes Conveyor, Hydraulic Pump & Manuals
MIYANO BNC-34S CNC LATHE GE FANUC OT-Includes Conveyor. Hydraulic Pump& Manuals Miyano BNC-34S CNC Lathe complete with scrap conveyor and hydraulic pump. I believe the date on this is 1994. It was running just fine until someone took out the control board(not sure why? So of course, this will need to be reinstalled. Also comes with all manuals. Must be picked up within 7 days of winning bid. Buyer responsible for loading and freight. Located in the Bradenton/Sarasota area of Florida. I have been selling on ebay for over 10 years and have 100% feedback on user ID molly726shopping. I have started a new venture and will now also be listing tig torch kits. Parts, and accessories, as well as other business and industrial items under this new user ID. Please contact me through ebay if you ever have any questions or would like more pictures ... moreon any item. Please note that payment is expected within 2 days of auction's end. Unless other arrangements have been made. Buy It Now listings require immediate payment. Payment is expected within 2 days of auction's end. Buy It Now items require immediate payment. All items are shipped within 1 day of receiving cleared payment.
|
|
|
FEMCO HL-55S CNC Lathe, 55hp, 15" Chuck, Fanuc, 2006, Tailstock, ONLY 800 hours!
FEMCO HL-55S CNC Lathe with ONLY 800 hours of actual Run Time! Fanuc Oi-TC Control Strong 15" Chuck Hydraulic Tailstock with 48" between Tailstock and Chuck Jaws Year: 2006 but Used very little for prototype work. Machine is running and ready for any inspection. SPECIFICATIONS CONTROL: FANUC 0I TC SWING: 28" MAX. MACHINING DIAMETER: 24" CHUCK SIZE: 15" SPINDLE SPEED: 2.500 RPM HORSE POWER: 40 TRAVELS-X AXIS: 13.38" Z AXIS: 50.0" CENTER DISTANCE: 55.0" TURRET TOOL STATIONS: 12-O.D. TURNING: 1" I.D. BORING: 2" SPINDLE BORE: 5.00" BAR CAPACITY: 4.50" EQUIPPED WITH: STEADY REST& CHIP CONVEYOR Contact Larry via email or phone at 517-782-2808 ext 23 with any questions or to schedule a showing. Thanks. Note: ALL machinery is sold AS IS WHERE IS. L&K Leasing and its owners are not ... moreresponsible for any and all damages done during Loading. Transport, or UnLoading of said machinery. Any damages which may result during loading, transport, or unloading of machine is the sole responsibility of the buyer.
|
|
|
FEMCO WNCL-35 CNC Lathe, 35hp, 15" Chuck, Fanuc, 1995, Tailstock, ONLY 800 hours
FEMCO WNCL-35 CNC Lathe with ONLY 800 hours of actual Run Time! Fanuc OT Control Kitagawa 15" Chuck Hydraulic Tailstock with 30" between Tailstock and Chuck Jaws Year: 1995 but Used very little for prototype work. Machine is running and ready for any inspection. Technical details Max. Swing Over Bed 24.4" Max. Turning Diameter 21.25" Spindle Bore 4.5" Bar Capacity 4.5" Spindle Nose A2-8 Chuck Diameter 15" Spindle Speed 2500 Rpm Spindle Motor 30/40 Hp Number Of Turret Stations 12 Turret Locking Force 5917 Lbs. OD Turning Tool Size 1" ID Boring Tool Size 2" X-Axis Travel 11.31" Z-Axis Travel 29.13" Approx. Dimensions 139" X 83" X 81" Approx. Weight 16.292 Lbs Contact Larry via email or phone at 517-782-2808 ext 23 with any questions or to schedule a showing. Thanks. Note: ... moreALL machinery is sold AS IS WHERE IS. L&K Leasing and its owners are not responsible for any and all damages done during Loading. Transport, or UnLoading of said machinery. Any damages which may result during loading, transport, or unloading of machine is the sole responsibility of the buyer.
|
|
|
Used 2007 Haas GT-10 CNC Turning Center Lathe with 8 station turret option MINT
2007 Haas GT10 CNC Turning Center w/ Turret. Machine is in Mint condition with less than 100 true DEBUG spindle hours. Machine is coming out of a technical school(no. It has not been crashed) Please contact Jason Stob 708 790-3358 with any questions. Specifications: Control. Haas. Max Turning Diameter. 10" Max Turning Length. 8" X-Axis Travel. 6" Z-Axis Travel. 8" Max Thrust X. 2400 lbs. Max Thrust Y. 3700 lbs. Rapid Traverse Rates(X. Y) 710 IPM. Chuck Size. 5.3" Spindle Bore. 1.38" Spindle Nose. A2-5. Spindle Motor. 7.5 HP. Spindle Speeds. 3.000 RPM. Spindle Torque. 42 Ft Lbs@ 475 RPM. Turret Stations. 8. Machine Dimensions.
|
|
|
OKUMA Captain L370BB CNC Turning Center CNC Lathe New 2001
Machine Sold with a 30 Day MDNA Money Back Return Guarantee. Seller will load on Buyer's Truck at No Charge. Payment Due 10 Days after Auction Close. Machinery Dealers National Association Member OKUMA CAPTAIN"Big Bore" L-370 CNC TURNING CENTER Model 780-BB. S/N 0178, New 2001, Stock# K13971 EQUIPPED WITH: Okuma E100L CNC Control w/CRT. 3.15" Big Bore Spindle Bore Option, Touch Setter. 10" 3-Jaw Kitagawa B210 Chuck, Hi-G Control, NC Torque Limit. Lap-4, Auto Chamfer, 3D Animation, Tool Life Management, Tool Wear Comp. Spindle Orient, Cycle Time Monitor and Reduction, Auto Door, Robot or Barfeed Interface I/F D. Circular Interpolation, Bed Mounted Programmable Tailstock. Auto Backlash Compensation, Coolant System. And Chip Conveyor, Tooling Package. CATALOGUE SPECIFICATIONS: Max Swing Over Bed. 20.08" Maximum Turning ... moreDiameter. 14.56" Maximum Turning Length. 20.47" Chuck Size. 10" Cross Travel(X-Axis) 10.23" Longitudinal Travel(Z-Axis) 20.47" Feed Range(Infinitely Variable) 1-400 IPM Rapid Traverse Rate(X-Axis) 787 IPM Rapid Traverse Rate(Y-Axis) 984 IPM Number of Turrets. 1 Tool Positions. 12 Total Spindle Bore. 3.15" Spindle Nose. A2-8 Spindle Speed Range(1 RPM Increments) 75-3800 RPM Spindle Horsepower. 20 HP Approximate Machine Dimensions. 104" x 73" Approximate Machine Height. 69" Approximate Machine Weight. 9.000 LBS CONDITION: Machine Appears to be in Excellent Condition! Located in our warehouse in Cincinnati. Price
|
|
|
Southwest Industries Trak TRL 1440P CNC Manual Lathe 14x40 Prototrak LX-2 Tstock
1997 Southwestern Industries Trak TRL 1440 CNC/Manual Lathe w/ Proto Trak LX2 CNC Control. Comes with both collet chuck. 3 jaw chuck, and a boat load of collets. Machine is in pristine condition and can be seen under power. Please contact Jason Stob 708 790-3358 with any questions. Specifications: Swing over Bed.14" Distance between Centers.40" Swing over Cross Slide.7.0" Cross Slide Travel.8.0" Spindle thru Hole.1.56" Spindle Speeds.60-2.400 RPM Spindle Nose.D1-4 Camlock Max Rapid Feed. X.100 IPM Max Rapid Feed. Z.100 IPM Main Motor.5 HP Tailstock Quill Travel.5" Tailstock Quill Diameter.2.36" Tailstock Quill Taper.MT-3 Approx Dimensions.73" x 44" x 57" Approx Weight.1.800 Lbs Equipped With: ProtoTrak LX2 CNC Control Tailstock Tool Post 3 Jaw Chuck Numerous Collets Collet Closer All Available ... moreManuals Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 60007. All items are sold"AS- IS. Where- IS" and with all faults. Ite
|
|
|
Used 2009 Haas GT-20 CNC Turning Center Gang Tool Lathe MINT 20HP Spindle 8"
2009 Haas GT-20 CNC Turning Center w/ Gang Style Tooling. Machine is in Mint condition with less than 105 true DEBUG spindle hours. Machine is coming out of a technical school and has only been used to cut plastic and aluminum in a training center. Please contact Jason Stob 708 790-3358 with any questions. Specifications: Control. Haas. Max Turning Diameter. 11" Max Turning Length. 12" Rapid Traverse Rates(X. Y) 710 IPM. Chuck Size. 8" Spindle Nose. A2-6. Spindle Motor. 20 HP. Spindle Speeds. 3.000 RPM. Turret Type. Gang Machine Weight. 5.700 Lbs. Equipped With: Coolant Pump Kit Gang Type Tooling. 8" Hydraulic Chuck. Spindle Orientation. Custom Macros. Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it ... moreis not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 60007. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(520 Machinery Sales LLC and/o
|
|
|
Bridgeport Romi EZ-Path SD CNC Lathe, NEW in 1999 W/ 20" Swing by 40" Centers
LINK TO VIDEO OF MACHINE RUNNING Bridgeport Romi EZ Path II CNC Teach Lathe. New in 99' with 20" Swing by 40" Centers Specification Description Control, Bridgeport EZ Path Control, Swing, 18" Swing Over Cross Slide, 8" Distance between Centers, 40" Spindle Nose, A2-5, Spindle Bore, 2.08" Spindle Speeds: w/ 6" Chuck, 1.000 to 4,000 RPM, W/8" Chuck, 750 to 3.000 RPM, W/ 10" Chuck, 500 to 2.000 RPM, Rapid Traverse Rate: X-Axis, 295 IPM, Z-Axis, 394 IPM, Main Motor, 10 HP, Approx Dimensions, 99" x 56" x 76" H, Approx Weight, 5.000 Lbs. Equipped With: 8" 6-Jaw Manual Chuck. Bridgeport BPCT CNC Control, Dual Electric Handwheel Control, Coolant System With Chip Pan, RS232 Serial Interface, 3.5" Floppy Disk Drive, Manual Tailstock NOTE: All specifications are approximate. And ... moreare not binding in any way. We endeavor to make information as complete and accurate as possible. If you notice a discrepancy, please let one of our sales people know so that the error can be corrected. Warranty USED EQUIPMENT: 30 day return privilege per MDNA. We suggest you Inspect All Used Machinery Prior to Purchase. This machine needs to be shipped via a flat-bed. If you wish to try to ship a different way. Please contact us to discuss before making arrangements. Dimensions and Weight should be above. Contact Erik@ 847-338-7139 if you have any questions on the machine. NOTE: This machine can be picked up in Elk Grove Village. IL( near O'Hare)
|
|
|
1988 Fortune Vturn-46 CNC Lathe
ID# 90251 Machine Specifications: Swing Over Bed. 32.28" Max Turning Diameter. 28.47" Distance Between Centers. 68.9" Spindle Bore. 4.84" Spindle Nose. A2-11. Spindle Speeds. 1500 RPM. Spindle Motor. 50 HP. X-Axis Travel. 15.35" Z-Axis Travel. 64.96" Rapid Traverse X. 472 IPM. Rapid Traverse Z. 590 IPM. Turret Positions. 10. Equipped With: Fanuc 0i-TD CNC Control. 10.4" Color LCD. 15" Kitagawa B15 Hydraulic 3-Jaw Chuck. Programmable Tailstock. Fongex Chip Conveyor. Side Exit. Heavy Duty Box Way Construction. Machine Location: Johnsburg. IL USA. Additional Information: Machine can be seen under power. Terms and Conditions: All items are subject to prior sale. Payment due in full via bank wire within five(5) days of"buy it now" offer. All items are sold"AS-IS. WHERE-IS" and with all ... morefaults. Buyer is responsible to coordinate pick up with seller and buyer is responsible for all freight charges. Seller will prep item for shipment and load onto buyer's truck. Seller makes no guarantees regarding accuracy. Errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or conditions of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. Contact Information: Contact Sean Johnson at 847-497-9800 for any questions and for payment detail.
|
|
|
Mori Seiki ZL-15M CNC Lathe
1992 MORI SEIKI ZL-15M CNC Lathe. S/N 224 MORIC D5F FAPT(FANUC 15TTF) CNC CONTROL Four Axis Simultaneous Turning with Upper& Lower Turrets C-Axis 5 Degree Indexing Capability 6" Kitagawa B206 Hydraulic Chuck 16C Collet Chuck Manual Tool Presetters for Upper& Lower Turrets Chip Conveyor Auto Parts Catcher Auto Power Off Three-Color Tower Light Tailstock SMW SpaceSaver 12.65 Autoload Short Magazine Barfeed 1 OD Live Holder 1 Face Live Holder 8 Holders for Upper Turret Boring Bar 6 Caps for Live Holders 1 Cut-Off Holder 3 Spindle Liners Please contact seller with any questions or to make an offer Freight prices are estimated and subject to change to a price agreed upon by buyer and seller at time of purchase OR b uyer may set up freight with their own preferred carrier. Thank you!
|
|
|
Star SR-20 Swiss Turn CNC Lathe 1997, Iemca Barfeeder
CNC Machine Tool Services 1666 Oakbrook Drive. Gainesville, GA. 30507 706-783-5091 706-783-5800 fax 770-401-3572 cell Email- sales@cncmts.com For a link to our website. Please click on this icon Specifications subject to verification Max Turn Dia: 25/32" Main Spindle Bore: 15/16" Max Headstock Stroke: 8" per stroke Max Drill Cap: Stationary Tool: 5/16" Max Tapping Cap. Stationary Tool: 3/16" Max. Milling Cap. 3/8" Max Die-Cutting Cap. M 8 X P1.25 Spindle Speeds: 400- 8000 RPM Main Spindle Motor: 2.2 Kw Cross Mill: 350- 5000 RPM Slotting: 60- 900 RPM 3 LIVE CROSS MILL/DRILL TOOLS 3 BACK WORK POSITIONS 6 FRONT WORK POSITIONS 3 FRONT DRILL POSITIONS SUB SPINDLE: Max Chucking Dia. 25/32" Max Length/ Front Ejection: 3- 5/32" Sub Spindle Speed: 300- 3500 RPM Motor: 0.75 Kw Approx Weight: 3527 Lbs. Approx ... moreDimensions: 7' X 4' X 6' EQUIPPED WITH: Star(Allen Bradley) Control Chip conveyor IEMCA Barfeed Parts Conveyor Tool Breakage Detection C axis on Main Spindle Indexer on Sub Spindle This machine is under power at our facility in Gainesville. GA. Please go to our website for our terms and conditions. We also can arrange the transportation to your facility using one of our trusted truck lines. Considering we ship machines all over North America. We get great rates on shipping costs. CNCMTS will also provide setup assistance if needed. Please contact us for details. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14307fa3d17-0x107-
|
|
|
STAR SR20R CNC Swiss Automatic Lathe 6-Axis 20mm Screw Machine
STAR CNC SR20R CNC Swiss Automatic Lathe New in 2001 Star SR20R CNC Swiss Automatic Lathe General Specifications As Per Brochure(Please Verify Details) Fanuc 18iT C-Axis Control. Max. Turning Diameter: 3/4" 25/32" Max. Headstock Stroke: 8" Max. Drilling Cap. Stationary Tool: 25/64" 10mm) Power-driven Att. 5/16" 8mm) Spindle Speed: 10.000 rpm Main Spindle Motor: 2.2/ 3.7 kW Tooling Positions: 6-OD Turning. 4-ID front drilling, 4-ID backside drilling, 4-LIVE Rotary Cross Tools Power-driven Att. Spin. Speed. Cross Mill. 8000 rpm Sub-spindle(Back Working) Max. Chucking Diameter: 3/4" 25/32" Spindle Indexing: 15 deg(1 deg OP) Sub Spindle Speed: 8000 rpm Motor: 1.5/ 2.2 kW Approx Dimensions: 80" X 43" x 67" Approx Weight: 5400 lbs*EQUIPPED WITH: LNS 12ft Hydro Barfeed Set of Books 2-position ER16 ... moreLive Face Milling Unit*INSTALLED CONTROL OPTIONS: 40m storage inch/metric multi rep cycle corner radius const surface speed spindle speed fluctuation back ground edit 64 offset tool nose comp can cycle drilling thread cut custom B marco polar cord helical int*Machine is complete and in very good condition. RAN OIL. VIDEO UPON REQUEST*Will prep for ship. buyer makes arrangements& pays for shipping. Call with any questions. 805-405-3598 Check out my other items! star cnc swiss citizen l20vii tornos deco 10 tsugami swiss haas miyano mazak mori lns iemca barloader edge techn sr20r star sv32 citizen m32 hanwha escomatic tornos bechler fmb parlec applitec kennametal iscar valenite garr spartan carbide agathon southwick sandvik carmex guhring micro 100 genswiss whizcut alouette fmb
|
|
|
Haas SL40 BB Cnc Lathe
Super Nice SL 40 BB! 11/07 serial. Less than 3 K hours. See under Power now. Features include: 6.5" Bar Cap. High Pressure coolant Chip conveyor Tool Pre setter 18" hydraulic Chuck. Sold As Is Where Is. Call for Freight and Rigging. 918-894-8001 Posted with
|
|
|
2013 Doosan Lynx 220LMSC CNC Live Tool Sub Spindle Lathe Turning Center Fanuc
2013 Doosan Lynx 220LMSC Live Tool. SUB SPINDLE, Full C Axis CNC Turning Center Machine is in excellent running. LIKE NEW, condition and can be seen under power as needed. Please contact Jason Stob 708 790-3358. Specifications: Control. Fanuc 0iTD. Swing Over Bed. 23.6" Swing Over Carriage. 14.63" Max Bar Capacity. 2.625" Distance Between Spindles. 29.68" Max Turning Diameter. 11.8" Spindle Speed(Main) 4.500 RPM. Spindle Speed(Sub) 6.000 RPM. Spindle Motor(Main/Sub) 20/7.3 HP. X-Axis Travel. 8.07" Z-Axis Travel. 21.6" Rapid Traverse Rates(X/Z) 1.181/1,1417 IPM. Turret Positions. 12. Turret Index Positions. 24. Live Tool Max RPM. 6.000 RPM. Floor Space(Length Width) 109” x 64” Machine Weight.
|
|
|
2008 HAAS SL40 CNC LATHE Vey Low Hours ST40 SL-40 ST-40
2008 Haas SL40 CNC Lathe 40" Swing. Chip Conveyor, Rigid Tapping Hours: Spindle Time: 2806:15:29 In Motion Time: 2223:03:08 Servo On Time: 8278:11:11 Our Stock Number 1363-102113 Machine Description Haas SL40 CNC Lathe; 25.5" x 44" 648 x 1118 mm) max capacity. 40" 1016 mm) swing. 40 hp(30 kW) vector drive, 2400 rpm, 2-speed gearbox. A2-8 spindle, 15" 381 mm) chuck, 10-station turret, 15" color LCD monitor. USB port and rigid tapping. Year: 2008 Serial# 3081277 Specifications: are accurate to the best of our knowledge) X Axis Travel: 17" Z Axis Travel: 44" Swing Over Front Apron: 40" Swing Over Cross Slide: 25" Maximum Turning Dia: 25.5" Maximum Bar Capacity: 4.0" Maximum Turning Length: 44" Maximum Speed: 2400 rpm Torque: 1400 ft-lb@ 150 rpm Motor: 30/40 hp Spindle Nose: A2-8 ... moreSpindle Bore: 4.62" Rapid Traverse Rate: 710 IPM Draw Tube: 4.06" Dimensions: 189.5" L x 98"W x 86" H Machine Weight: 23000 LBS Equipped With- 15” Chuck Rigid Tapping USB Quick Code Programming System High-Intensity Lighting; dual halogen external lights Tool Presetter System Chip Conveyor. Belt type This machine is in very good working order. You may inspect under power. Any questions please call at 616-455-3800 SPECIFICATIONS ARE ACCURATE TO THE BEST OF OUR KNOWLEDGE. Shipping and Handling All orders are shipped via United Parcel Service(UPS) Ground to locations within the 48 continental United States if size and weight allow otherwise will be shipped best way. Shipping charges for orders shipped outside the 48 continental United States may be considerably higher. Most orders will be shipped within 2 to 5 business days after payment has been confirmed(weekends excluded) All orders are processed during business hours. Monday thru Friday from 8:00am to 5:00pm PST. Shipping cost is fixed. Please bid accordingly. No discounts will be given. Multiple auctions will not be shipped together. Payment We prefer wire transfer. Visa& MasterCard accepted thru
|
|
|
Traub TND 360 CNC Lathe, 40HP Turning Center
CNC Lathe Traub TND 360 Description: Turning diameter: 360mm Control: Traub TX 8 CNC Turning Lathe Traub TND 360 Year 1987 Turning diameter 14.125in. Turning lenght 31in. Travel( X-Y) 8-31.88in. Control Traub TX 8 Tailstock 8 Tool Turret Speeds 0-3150RPM 40 Horse Power Power supply 460V 78A 3~ Weight 6600lbs. This machine is currently in working condition though does not get used often enough to justify keeping it. This machine is an absolute workhorse. It is a well maintained. Carefully used machine. It is great for roughing large amounts of material in short time spans. The tolerances are still tight +/ 0.0015. Being a 30 year old machine it has it's bumps and bruises, but nothing that affects its ability to work. The Controller is in good shape and electrical is good. Happy Bidding. Item is located in Surrey, British Columbia, V4N ... more4C7, Canada Shipping will be the buyers responsibility and is not included.
|
|
|
Emco PC 50 Turn CNC Lathe Collet Chuck FANUC O Controls 6 Tool Holder
Free Shipping or Pickup Discount- See Details Below 100% Operational. Ready to Run. Comes with everything shown in pictures and videos. Please note that the free shipping is a $250-$450 value. More details below video. These videos belong to me and to this listing only. Some of the things included. Emco PC 50 Turn CNC Lathe. Emco Fanuc O Controls. Complete PC with Emco's RS485 ISA Card Installed. Comes with all cords. Cables, keyboard and mouse. WinCam. WinNC and 3dVeiw installed. Emco Software and machine data disk. Manuals(read below) This machine has been fully tested in WinCam and WinNc. All spindle speed variations tested. Axis feed rates, and tool positions. Both axis drive smoothly throughout the whole bed and are accurate. Fanuc O control keyboard works great. The machine has the following options installed; Collet Chuck. Manuals; ... moreLots of software manuals. Machine manuals, guides, electrical diagrams and more on computer. Anybody can learn to use this with all the educational manuals included. WinCam level 1&2 guide, Fanuc O guide and machine manual printed. WinCam Level 2 guide that is printed has instructions for external threading. Tooling; 1/4" 1/2" 5/8" collets included. 1 Emco cut right tool. Expect to get more tooling, this is just to try out machine. You can use 1/2" tooling in turret. Recommend 3/8" Internal tool need 10mm shaft. The PC is older and has Windows 98se on it. It is the highest windows operating system that will work with Emco's software. The PC is reliable and fast for running Emco's programs. This is required and the OS can not be upgraded. The PC Turn 50 enables all major processing possibilities of an industrial CNC machine: Facing. Plain and contour turning. Grooving. Threading. Drilling. Emco'PC' CNC machines are compatible with CAD/CAM systems and are user friendly. Offer full compatibility with industrial CNC machines and. Proprietary control systems. Features 2-axis lathe in an industrial slant-bed design. Interchangeable cont
|
|
|
1995 Hyundai HIT 8S CNC Lathe Tailstock Kitagawa Chuck Seimens Controller
Hyundi HIT 8S cnc lathe in exelent condition with tool holders ONLY 900 HOURS. will load on your dock high truck FREE! Comes with all manuals and books
|
|
|
2009 HAAS CNC LATHE SL-20 w/ Servo Bar 300 Bar Loader
2009 HAAS Lathe machine with Bar Loader and newer CNC control that features live imaging. Also comes with: 5 ID holders. Turning holder, cut-off holder, belt type chip conveyor, royal 3J collet chuck unit, 1.5" collet, tool pre-setter, parts catcher, setup manual, and complete original equipment. Does not have tail stock. This machine was purchased brand new in June of 2009, and is in excellent condition! Works perfectly, and was maintained. Machine has approximately 1200 hours of use. Only the 1.5" spindle liner was used, while the other liners and additional pusher were never used. IF YOU ARE INTERESTED, PLEASE EMAIL ME BEFORE YOU BUY OR IF YOU HAVE ANY SPECIFIC QUESTIONS. I will be more than happy to answer them. I am only accepting PAYPAL or CASHIER CHECKS. BUYER IS RESPONSIBLE FOR FREIGHT SHIPPING. Thanks for looking.
|
|
|
TRAK TRL1840CSS PROTOTRAK SOUTHWESTERN INDUSTRIES FLAT BED CNC TEACH LATHE
SOUTHWESTERN INDUSTRIES Trak TRL1840CSS(Constant Surface Speed) CNC Flat Bed Engine Lathe with LX3 CNC Control. Mfg. in 2000; Just purchased from the R& D Dept. of a local pharmaceutical company. Used mostly on plastic and used for prototype work. Ways are excellent and this machine runs well. It was just checked out by a local machinery rebuilder and given a clean bill of health. It is equipped with a 5C Lever Type Collet Closer, 8" BTC 3-Jaw Adjustable Chuck, 10" Bison 4-Jaw Chuck and all original operator/programming manuals. Call Marc at(732) 390-0006 to inspect under power in NJ. No charge for loading onto your flatbed truck. We can help finding competetive trucking rates for you. This lathe is already skidded and ready to ship! Additional Specifications: swing over bed.18.5: swing over saddle wings.17" swing over ... morecross slide.9" cross slide travel.13 bed width.14.5" spindle nose.D1-6 Camlock Type spindle through hole.2.36" number of spindle speeds.infinately variable spindle speed range.low.50- 270 medium.150- 950 high.450- 2500 Tailstock quill travel.6.3" quill diameter.2.95" quill taper hole.5 morse taper Motor 10 HP 36 Amps 230 Volt. 3 Phase
|
|
|
Star SA12/16 CNC Swiss type sliding head lathe with FMB barloader and tooling
For immediate sale: Star SA12 CNC lathe Capacity 12mm/ 16mm Age 2000( to be confirmed) Fanuc 18i-T cnc control Sub spindle 2 live turning spindles Linear forming tools Back and front drilling tool station FMB Minimag magazine barloader( 10' bar length) Photos show machine in original location and also as it stands now in our warehouse. See the machine running: The machine is just out of production on Thursday 10th October 2013 Company owning this machine from new and machine serviced by Star UK from new Machine is in perfect running condition and has just been replaced by brand new Star Location: EMTEC warehouse. BASILDON, Essex, SS13 1BJ, ENGLAND We offer machine for BUY IT NOW: $ 37.500 USD including packing and container shipment to US mainland, excluding US customs clearance, local taxes and duty and customs broker fees, or MAKE BEST ... moreOFFER. Please call BEFORE bidding to confirm terms of sale. Further details on request to: Please feel free to call Roger Roberts anytime to discuss on: +44.7831.850595
|
|
|
Tornos Deco 2000/13 SWISS CNC sliding head lathe with Robobar loader and tools
Take full advantage of Sect.179 NOW. We offer for immediate sale: Tornos Deco 2000/13 CNC lathe Age 1999 11 axis Good quantity of tooling Tornos Robobar SSF226 magazine barloader( for 10' bars) See machine running at: http:www.youtube.com/watch?v=RP9hQmsDn08 We offer the machine including the following services: Packed into 1 x 20' container at our own warehouse by our own staff to ensure safe despatch and safe. Secure ocean shipment. Freight up to your door excluding US customs clearance. Any local taxes of duty and US customs broker fees. So. We offer the machine, shipped to your door as describes above for: BUY IT NOW at $ 43.000 USD or MAKE BEST OFFER Machine location: EMTEC warehouse. Basildon,Essex,ENGLAND SS13 1BJ We will pack machine for shipment and will ship as above. Please feel free to call Roger Roberts anytime on +44.7831.850595 ... moreto discuss before bidding or email us directly at
|
|
|
Haas SL-10B Big Bore CNC Lathe SL10B Turning Center New (2007)
Call us asap with any questions on our beautiful Haas SL-10B Big Bore! Call or email Mark. Scott, Steven or Manny at 773-866-9600 or sales@assetexchangeinc.com 8" chuck Haas Model SL-10B 2 Axis CNC Lathe(2007) 8" 3 Jaw Chuck. Tool Presetter, Parts Catcher, Barfeed Interface, Chip Conveyor, Haas CNC Specifications(Preliminary) Swing Diameter: 16.25" X Axis Travel: 6.25" Z-Axis Travel: 14" Rapid Traverse Rates: 710 IPM, Bar Capacity: 2" Center Distance: 16.5" Spindle Speeds: 6000 RPM, Main Motor Drive: 15 HP, Utilization: 9743 Machine on Hours 6303 Cycle Start 3371 Cut Time, Equipped With: Rigid Tap. Parts Catcher, 8” 3 Jaw Chuck, Auto Tool Presetter, Chip Auger, 1 MB of Memory, Barfeed Interface, 3.5" Floppy Drive, Spindle Orientation, Quick Code Programming, Contact Us Call for more information: 773-866-9600. ... moreAsk for Mark. Scott, Steven or Manny, RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-143231e9af0-0xe3-
|
|
|
Hyundai Hit-8S Cnc Lathe 6" Kitagawa Chuck Touch Probe Tailstock Part Catcher
Used Hyundai Hit-8s Cnc lathe with Hitrol 840C control in very good condition is for sale. Equipped with: Kitagawa 6" hydraulic chuck 5c Collet Closer Part Catcher Tool Touch Probe Tail Stock Automatic Tool Changer with 8 Stations Coolant Tank Fully Enclosed 5 Drill Holders Available Manuals Email me to schedule an appointment to look at it. Buyer will responsible for shipping and rigging cost. Posted with
|
|
|
Mazak Multiplex 6100 2- Spindle CNC Lathe #945090
Please Refer To Machine# 945090 Mazak Twin Spindle CNC Chucker w/ Gantry Loader Multiplex 6100 L2125 Lathes- Chucking N/C& CNC Chuck Size(2) 6" Manufacturer Mazak CNC Twin Spindle Chucker w/ Gantry Loader. Live Tooling, C Axis. Model No. Multiplex 6100. Controlled Axis 6. Year Mfg. 2007. Control Mazatrol 640T. No. Spindles 2. Swing 9" 9" Max Turning Diameter. AXIS SPECIFICATIONS Std. No. Axes: 6- AXIS TRAVEL TRAVERSE RATE FEED RATE X1(Std. 7.870 Inch 1181 IPM- Z1(Std. 14.400 Inch 1299 IPM- C1(Std. 360.000 Deg. 400 RPM- X2(Std. 9.060 Inch 1181 IPM- Z2(Std. 16.500 Inch 1299 IPM- C2(Std. 360.000 Deg. 400 RPM. Spindle Speeds 6000 RPM x 2. 4500 RPM Rotary Tool Speed. Hole Through Spindle 2.4" 2" Bar Capacity. Turret Configuration(2) 12 Station. Features/Accessories w/ Mazak Flex-GL75F Automated Gantry Load/Unload System. ... more2) Tool Pre-Setters. Motor HP 15 HP x 2. Spindle Nose/Taper A2-5. Condition Very Good. Comments w/ Coolant System. Chip Conveyor, Live(Qty.5) Static Tool Tooling Package. FOB Point Elk River MN. Price This Multiplex. Multi-Tasking dual-spindle machine handles mid-sized lot production. Both spindles can be used simultaneously to machine the front and back of the part, including milling, for Done-In-One, single-setup production. The synchronized spindle rotation delivers high-accuracy for operations like shaft work. Plus, there are many options available for unmanned production like bar feeders, cut feeders and gantry robots. Another Video at http:youtu.be/GR0u4tC1QUM.
|
|
|
MITSUBISHI 3 POLE BREAKER NF100-CB 100 AMP 500 V MORI SEIKI SL-3A CNC LATHE
MoriSL3ACNC Our internal inventory number on this product is 6T# B4-10B Please Note: This part is from a working machine: Mori Seiki CNC Lathe. Model Number- SL-3A, S/N 2331 with Yasnac Control, New early 1980's! We have no way of testing parts once removed. Click here to go directly to a listing of JUST the inventory we have from those machines! Description: You are bidding on a Mitsubishi Circuit Breaker. Model Number: NF100-CB. 100 Amp. SEE TAG PICS FOR COMPLETE SPECS Weight: 2 lb. Dimensions: 4" x 4" x 6" Cosmetic Condition Rating: 4-Good Note: This is solely a cosmetic description of the item. This part was pulled from a working machine and is being sold in good working condition unless otherwise stated! 1) Very Poor 2) Poor 3) Fair 4) Good 5) Like New Condition*NOTE* Free Shipping& Handling to lower 48 states ... morevia our choice of ground carrier. All Expedited Domestic Shipments pay $5.00 Boxing/ Handling/ Processing Plus shipping costs from zip 49534! All International Shipments pay $10.00 Boxing/ Handling/ Processing PLUS shipping costs from Zip 49534! ALL INTERNATIONAL ORDERS ARE SUBJECT TO ACTUAL SHIPPING COSTS- SOMETIMES THE SHIPPING CALCULATOR IS NOT CORRECT WITH PACKAGES! WE ALSO MAY SUBSTITUTE SHIPPING COMPANY TO GET YOU A BETTER PRICE! Domestic Shipping Policies: All shipments are sent standard ground unless requested differently. We can ship UPS next day air(red) per your request. Unless requested. All next day air shipments will be for the 10:30 a.m. delivery. We can ship this early A.M. But you must include that in your Paypal payment notes. International Shipping Policies: We ship FedEx International. UPS International, USPS Express International. Only when requested, we ship USPS Priority; this carrier type lacks reliable tracking info. We cannot be held responsible for your shipment once it leaves US land) We recommend FedEx for your international shipments. We usually get a pretty good rate from 30% 60% off on published rates. Per FedEx. These rates are subject to chan
|
|
|
2008 Doosan Lynx 220LC CNC Lathe Turning Center Fanuc with TURBO chip conveyor
Doosan Lynx 220LC EQUIPPED WITH: Maximum Swing: 20.1” Maximum Turning Diameter: 12.6” Nominal Turning Diameter: 8.3” Maximum Turning Length: 21” X-Axis travel: 6.9” Z-Axis Travel: 21.7” Turret Position: 12 Spindle Nose: A2-6” Spindle Bore: 3” Maximum Bar Capacity: 2.62” Spindle Speeds: 40 to 4.000 RPM Spindle Motor: 20 HP Equipped With: Collet Chuck Fanuc Series Oi-TC CNC Controls Tailstock Turbo Systems Chip Conveyor Coolant System Splash/Chip Guards Parts Catcher Hours: 2749 Shipping and Rigging by buyer
|
|
|
Bridgeport Romi EZ Path 2-Axis CNC /Manual Lathe #945105
Please Refer To Machine# 945105 Bridgeport Romi CNC Lathe EZ-Path L2150 Lathes- Combination N/C& CNC Chuck Size 8" 3 Jaw. Manufacturer Bridgeport Romi 2-Axis CNC/ Manual Toolroom Lathe. Model No. EZ-Path. Serial No. 002-079743-325. Year Mfg. 1995. Control EZpath 2-Axis. Swing 16.5" Over Bed. Max Center Distance 40" Spindle Speeds 37.5" 3000 RPM. Hole Through Spindle 1.25" Turret Configuration Dorian SmartDex 8 Station. FOB Point Elk River MN. Price $13.500. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14346d95be6-0xf8-
|
|
|
Hyundai Hit-8S Cnc Lathe 6" Chuck Probe Tailstock Part Catcher Revised Price!!!
Need to make room for new machine. So want to sell it ASAP! Used Hyundai Hit-8s Cnc lathe with Hitrol 840C control in very good condition is for sale. Equipped with: Kitagawa 6" hydraulic chuck 5c Collet Closer Part Catcher Tool Touch Probe Tail Stock Automatic Tool Changer with 8 Stations Coolant Tank Fully Enclosed 5 Drill Blocks Available Manuals Email me to schedule an appointment to look at it. Email: vtechmachininginc@gmail.com Buyer will responsible for shipping and rigging cost. Posted with eBay Mobile.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-14346d95cde-0xea-
|
|
|
CLAUSING METOSA EL-1565 CNC LATHE Teach Turning Center Toolroom Fagor 800
Machine MUST BE sold. Email us for video of machine under power! OR. You are bidding on a CLAUSING METOSA EL-1565 CNC LATHE. Machine in Plant- Under Power! Email for more information or video! Please check out our Feedback. We are straight shooters! NOTE* Top Bidder to pay actual rigging/ loading charges. OUR RETURN POLICY. Unit is being sold for a customer. Inspection encouraged as there is no 30 day return on this item! Good Luck.
|
|
|
+++ DMG GILDEMEISTER CTX BETA 500 lathe CNC turning machine +++
Spindle bearing NEW! Title: CNC Lathe Manufacturer: GILDEMEISTER DMG Model: CTX BETA 500 Year: 2008. Commissioning according to DMG Service Protocol 2010 Power ON hrs.18.700 Spindle hours: 3.200(new bearing with 10 hrs. Swing diameter: 700mm Turning diameter: 410mm X-travel: 300mm(Machine has scale in the X-axis) Z-travel: 550mm Drive power: 34 kW Speed: max. 5000 1/min with C-axis and driven tools Control: Heidenhain 4290 TurnPlus Turret: 12x VDI 40. All driven Chuck: SMW KNCS-N 225-65 Tailstock: program-controlled. MK5, 800 daN Chip conveyor Machine is complete refurbished in our stock. new spindle bearing-new Window-new painting-new scratcher-many more excellent condition. Like new Packaging and delivery to USA and Canada is not a problem! We can do it quickly! Used machinery without any warranty. WE ARE EXPERTS IN USED DECKEL MAHO GILDEMEISTER ... moreMACHINES. We have following machines in stock: DMU 200P. DMC 160U. DMU 50 evolution linear. CTX beta 1250 TC. DMU 80 monoBLOCK. And many more. ask us for more informations or check our website. Info@kuehner-werkzeugmaschinen.de.
|
|
|
+++ EMCO MaxxTurn 110 MY CNC turning machine lathe, 100" turning lenght +++
Type: CNC universal lathe. Manufacturer: EMCO. Model: MAXXTURN 110 MY 2500. Year built: 2006. Control: Fanuc 18i-TB with Manual Guide. Power On hours: 24600. Advancing hours: 7300. Weight approx: 16to. Main spindle. Speed range: max. 2000 1/min. Motor power: 42kW. Torque: 2000 Nm. Gear stages: 2( ZF transmission) Spindle nose: A2-11. Spindle bore: 125mm. Work area. Traverse. Swing diameter over bed] 820mm. Turning diameter over slide] 550mm. X] 305mm( 610mm turning diameter) Z] 2500mm( turning length) Y] +100/ 90mm. C] 0.001 °. Turret. Manufacturer: SAUTER. Type: electric drive. Interface: VDI 50. Tool stations: 12(+12 direct bolting for boring bar holder) Ready for living tools: all. Speed: 4000 1/min. Drive power LT: 10kW. LT torque: 70Nm. Tailstock. Pinole with stable bearing Koernerspitze( no MK Recording) Pinole hydraulically ... moreby M- command and retractable. To clamp full tailstock as W- axis Movable and with M command. Steady. Manufacturer: Rohm. Type: hydraulic. Self- Clamping with M command. Clamping range: Ø45-250mm. Z-axis can be automatically drag steady rest over subroutine. Equipment. Accessories. Power chuck: 400mm Roehm. Three-jaw chuck. Chip conveyor: hinge(new in 2012) Coolant unit. Complete documentation. Electric handwheel. About 10 driven tools. About 10 Backensaetze. Approx. 25 rigid tool holder. Available immediately from stock Wuppertal. There were various wear renewed(power chains. Scraper, etc. Packaging and delivery to USA and Canada is not a problem! We can do it quickly! Used machinery without any warranty. WE ARE EXPERTS IN USED DECKEL MAHO GILDEMEISTER MACHINES. We have following machines in stock: DMU 200P. DMC 160U. DMU 50 evolution linear. CTX beta 1250 TC. DMU 80 monoBLOCK. And many more. ask us for more informations or check our website. Info@kuehner-werkzeugmaschinen.de.
|
|
|
2004 Haas SL20T CNC Live Tool Turning Center Lathe Tailstock Servo 300 Barfeed
2004 Haas SL-20T CNC Turning Center with live Tool and programmable tailstock. Machine is in excellent condition and can be seen under power as needed. Comes with 2 live holders and Haas Servo 300 Barfeeder. Specifications: Control. Haas Swing Over Front Apron. 23" Swing Over Cross Slide. 9.5" X-Axis Travel. 8.45" Z-Axis Travel. 20" Rapid Traverse Rates. 710 IPM Chuck Size. 8.25" Max Bar Capacity. 2" Dist. Between Centers. 24" Max Turning Dia. 10.3 Max Turning Length. 20" Spindle Speeds. 4.000 RPM Spindle Motor. 20 HP Spindle Bore. 3" Draw Tube Bore. 2.06" Turret Stations. 10 Ma
|
|
|
1998 ROMI Bridgeport EZ Path SD CNC Lathe
1998 ROMI BRIDGEPORT EZ PATH SD CNC LATHE S# 002-083814-363 Swing over Bed: 16.96" Length: 40" Bridgeport 2 Axis EZ Path Control with Dual Electronic Handwheels Spindle Bore/ Taper 2.08" Distance between centers 40" Highest Spindle Speed 4000 rpm Under Power Located Charlotte NC Dock High Loading available Sold As Is Where Is(Any skidding or loading is additional) Complete with any/all spare parts. Manuals, tooling available. Contact Andy Box
|
|
|
1997 YANG GANG TOOL Model: SML-12 CNC Lathe
1997 YANG GANG TOOL Model: SML-12 CNC Lathe Mitsubishi Control Includes a 5C collet nose Questions: Please call Robby@ 714-892-9800 Featuring: Cast iron machine design Gang stlye CNC lathe Linear ways for X and Z for speed and accuracy Slant bed. 45 degree bed, Mitsubishi control, Spindle Speed 6000 RPM Coolant System Manual Grease Lubrication Specifications: 10 HP High Torque Spindle Motor Manual Grease Lubrication System Single Range Variable Speed Motor Spindle Speed 6.000 RPM Axis Overload Protection High Precision Linear Guideways A-2-5 Spindle Nose Heavy Duty Cast Iron Base. Saddle& Headstock Coolant System Roll-out Coolant Tank Swing Over Bed- 14" Max. Turning Dia. x Full Length- 5.35 x 9" Spindle Nose- ASA A-2-5 Spindle Bore- 1.77" Bar Capacity- 1.30" Turning Tool Shank Size- 0.625" Max. Boring Bar Size- ... more1.00" X Axis: Accuracy 0.0004"4" Repeatability ± 0.0002" Travel 9.05" Z Axis: Accuracy 0.0008"12" Repeatability ± 0.0004" Travel 9.05" Rapid traverse 1181 ipm, XZ Axes: Ballscrew Dia. 1.26" XZ Ways: Linear Star 30 Bed: Cast iron. 45 degrees Approx. floor space 79L x 47W x 65"H Approx. net weight 3.784 lbs Power requirements- 208/220 VAC. 3 Phase/ 50
|
|
|
Okuma ES-L10 CNC Lathe, 2004, Low Hours, Will Load for Free,Can Help w/ Trucking
Please see info below and photos on a really nice Okuma ES-L10 CNC Lathe. This machine is equipped with IGF. Barfeed Interface, Parts Catcher, and 2.5" Bar Capacity. It is under power in Cincinnati, OH and is available to show to you. This machine is in super nice shape and has less than 5700 cutting hours. This machine will make someone an excellent machine. I do have the ability to load this on your truck. I can shop and get you a freight rate if you want me to do so. Please call Paul Trossman at 513-310-7433 w/ any questions or please email me at paultrossman@hotmail.com. OKUMA ES-L10 CNC TURNING CENTER Model ES-L10. New 2004, S/N P0148 EQUIPPED WITH: OSP U10L CNC Control. One Touch IGF, Barfeed Interface, Parts Catcher, 3-Jaw Hydraulic Chuck, 12 Position ID/OD Tool Turret, Expanded Auto Chamfer, Thread Feed Hold, Animation, Programmable ... moreTailstock, Lap-4, Nose R 2B, User Task 2, NC Torque Limit, Servo Link NC Servo Link Spindle, MACMAN, Hi-G Control, Inch/Metric Switch, Cycle Time Calculator, Heavy Duty Slant Bed Construction, Chip Conveyor and Coolant System. CATALOGUE SPECIFICATIONS: Max Swing Over Slant Bed. 21.65" Max Swing Over Carriage. 12.20" Max Distance Between Centers. 19.68" Cross Travel(X-Axis) 8.10" Longitudinal Travel(Z-Axis) 20.47" Feed Range(Infinitely Variable) 1 to 200 IPM. Rapid Traverse Rate. 590 IPM. Number of Turrets. 1. Turret Positions. 12. Spindle Bore. 3.15" Bar Capacity. 2.5" Spindle Speed Range. 25-3000 RPM. Spindle Drive Motor. 15 HP. Electrics. 220/3/60. A
|
|
|
1996 OKUMA LCS-15 CNC Lathe "Video"
OKUMA LCS-15 CNC LATHE Manufactured in 1996 Machine Specifications: Capacity: Swing over bed.17.72" 450mm) Swing over carriage.13.78" 350mm) Swing over cross-slide.11.81" 300mm) Max. turning dia. X length.10.63 X 11.02" 270 X 280mm) Spindle: Spindle dia.3.94" 100mm) Spindle nose type.JIS A2-6 Max. spindle speed.4000 rpm's Taper hole.2.76" 70mm) X 1/10 Through-spindle hole.2.44" 62mm) Cross-slide X-axis: Axis travel.6.10" 155mm) 0.79 +5.31" 20+135mm) Feedrate.0.00001 to 39.37 ipr(0.001 to 1000.000mm/rev) Rapid federate.590.55 ipr(15000mm/min) Carriage Z-axis: Axis travel.12.60" 320mm) Feedrate.0.00001 to 39.37 ipr(0.001 to 1000.000mm/rev) Rapid feedrate.787.40 ipr(20000mm/min) Turret: V type 8 station, Tool size OD turning tools.0.98" 25mm) ID turning tools.1.57" 40mm) Tailstock: ... moreTailstock spindle dia.2.17" 55mm) Tailstock spindle taper hole.MT No. 4(revolving ctr) Tailstock spindle travel.3.15" 80mm) Motor: Spindle drive motor.VAC 10/7.5hp(7.5/5.5 kW) 30min/cont. Carriage feed Z-axis.2.7hp(2kW) Cross-slide feed X-axis.2.7hp(2kW) Hydraulic power unit pump.2hp(1.5kW) Guideway lubrication pump.0.023hp(0.017kW) Coolant pump.0.33hp(0.25kW) Machine Dimensions.60 X 65.3 X 64.17" 1520 X 1660 X 1630mm) Net Weight.6160#s(2800kg) This machine includes: 8" Hydraulic Chuck(not shown in photo) All available manuals Chip
|
|
|
CNC LATHE FANUC TURNING CENTER MACHINE 12 CHUCK CONVEYER SUPERMAX No RSV
CNC TURNING CENTER SUPERMAX TC 26L(long bed) Supermax 26L CNC Lathe– YCM TC 26L Very Good Condition and Ready to use. The Cutting Time is 2821 hours. This machine was only used part of the time. The Power On Time is 13230. Fanuc 18T Control. Serial# 010117 Year 2001 Programmable Hydraulic 12’ MMK chuck(fits Kitagawa jaws) 19.68” swing. 43.3"center to center. Tool Setter. Programmable Hydraulic Tailstock. Chip Conveyer. Gearbox spindle with Low and High Gear. 3000 RPM 220 V 3 phase 40 KVA YCM Website. More info. See control Specs and scroll down to TC 26L Lathe Specs. YCM is very much in business and parts are available. Fanuc Controls including Servo Motors and Drive Motors are Top Of The Line. All the Manuals including Fanuc Control Operator Manual. Operator Machine, Electrical, Mechanical Manuals#1 and#2, Fanuc Control Maintenance, ... moreFanuc Control Parameter, Loading cost $1.000 Must be paid by buyer. IF YOU HAVE ANY QUESTIONS REGARDING THIS ITEM WE WELCOME YOUR EMAILS INQUIRIES WIRE PAYMENTS ARE PREFERRED. THIS SALE IS FINAL TERM AS IS WHERE IS. WE CAN ARRANGE THE SHIPMENT GLOBALLY BUT CUSTOMER HAVE TO PAY FOR THE FREIGHT/Customs Duties LOCAL PICKUP'S WELCOME.
|
|
|
Mazak CNC QT 10 Lathe with Mazatrol CAM T-2 CNC Controls
ONE) PRE-OWNED MAZAK CNC LATHE MODEL QT 10 WITH MAZATROL CAM T-2 CNC CONTROLS MACHINE AS TAKEN FROM POWER FROM PLANT FLOOR Specifications: Turning Diameter: 9.8" Max. Work Length(Max. 19.69" Distance Spindle Nose To Turret Face: 3.94" 22.3" Spindle Speeds: 36 to 3600 RPM Spindle Nose: A2-5 Through Spindle Hole Diameter: 1.97" Spindle HP: 7.5 HP/ 10 HP Number of Tools: 16 X- Axis Travel: 6.1" Z- Axis Travel: 21.4" Equipped With: Mazatrol CAM T2 CNC Control 8" 3 Jaw Power Chuck Auto Lube System AC Main Spindle Motor More Photos& Videos Available Upon Request. Click here to learn more about financing for this machine. Please Note: Not all machines may qualify. NOTES: MACHINE IS SAID TO BE IN GOOD RUNNING CONDITION AS TAKEN FROM SERVICE. NO KNOWN ISSUES. Machine is being offered at Auction/ As-Is/ As ... moreTaken From Service. Loaded onto truck. No Return Privilege. Preliminary specifications are subject to verification and should be used as a guide only. BMC cannot guarantee the accuracy of the specifications and/or description given of the condition of machine(s) Delivery- BMC can assist buyer in securing competitive freight quotes from our preferred freight providers for shipping and assist in scheduling a pick-up and delivery to buyers facility. Please note that delivery constitutes delivery only. Buyer will be responsible for unloading machine(s) Delivery may take up to two-weeks depending on freight provider schedule. All payments are to be made in full within 5 days of auction end. Machinery will not be shipped until payments for machine(s) and any freight charges are paid in full. BMC is not responsible for any damage to machine after being loaded onto truck. It is the responsibility of, buyer, freight company provider and driver to insure that machine is fastened, secured and tarped after loading. All Pick-Up times must be scheduled and time allowed(up to two weeks) to ensure for proper prepping& loading machine onto truck. Auction Termination: In order to protect the
|
|
|
Bridgeport Ez Trak Romi Cnc Lathe
Really Nice 20X50 EZ Trak Lathe. This machine is in good working Condition. Has a 8 station Dorian Manuel Turret. I have a video of It running. Or come see it under power. Sold as Is Where Is. We can load it. Call 918-894-8001 for freight quote Or questions. Posted with
|
|
|
1996 Mazak Super Quick Turn 15S T Plus Sub Spindle CNC Lathe Machining Center
1996 Mazak Super Quick Turn 15S Control: Mazatrol T Plus Color Maximum Swing: 20" Turn Diameter: 11.8" Machining Length: 20" Spindle Bore: 2.4" Bar Capacity: 2" Chuck Size: 8" Spindle Speed: 5000 RPM Main Motor: 25HP Turret Position: 12 Live Tooling/Milling: No Tool Eye T-Plus Sub Spindle Chip Conveyor For More Information Please Call Maury Cohn 1 800 888 4312
|
|
|
Doosan Puma 2000Y Live Tool Y Axis CNC Turning Center Lathe Daewoo Fanuc 8" chk
2008 Doosan Puma 2000Y CNC Turning Center with Live Tool and Y Axis Specifications: Control. Fanuc 18iTB Swing Over Bed. 23.6" Max Bar Capacity. 2.625" Max Turning Length. 20.1" Spindle Speed. 45- 5.000 RPM Spindle Nose. ASA-A2-6 Spindle Motor. 20 HP X Axis Travel. 10" Y Axis Travel. 4" Z Axis Travel. 22.8" X& Z Rapid Traverse Rate. 790/ 945 IPM Number of Tools. 12 Live Tool RPM. 5000 RPM Live Tool Motor. 7.5 HP Floor Space Required. 123" x 70" Weight. 10.470 lbs Equipped With: 2) X Axis Live Toolholders. 1) Z Axis Live Toolholder. Tool Presetter Parts Catcher Programmable Tailstock 8" Hydraulic Chuck Please contact Jason Stob 708 790-3358 with any questions. Financing Available! Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid ... moreby the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, how
|
|
|
2003 Traub TNL 26/32 CNC Swiss Lathe (2 Available)
General Specifications As Per Brochure(Please Verify Details) Upper& Lower Turret with Front& Backworking Tool Blocks. CNC Control: Traub/Mitsubishi TX 8i. Number of Programmable Axes: 13. Turning Dia 1.260" Max. Turning Length 9.842" per stroke. Bar Capacity 1.260" 41mm spindle bore) Spindle Speeds: 8000 RPM. Spindle Drive Motor 26 HP. Sub-Spindle Turning Dia 1.260" Sub-Spindle Turning Length 5.512" Sub-Spindle Speed: 8000 rpm. Machine will be equipped with: Main Sindle Full C-axis. Sub Spindlee Full C-axis. Guide Bushing Housings(26& 32mm) Guide Bushing- Programmable. Knoll Chip Conveyor-Part Conveyor. Systems 1.2,3& 4 all capable of running live tools. Iemca Boss 432/37 Magazine Bar loader(12' cap. 32mm channel) Fire Suppression System. Mist Buster Quad Mist Collection Unit. Resy Kompakband ... moreFilter(High Pressure Coolant/ Paper Filter Unit. Reber Systematic GmbH 03/6378-885721(KBF 452/500 Nr. 31(Includes extra. Paper Filters) Software CD is WIN CNC-WIN FLEX IPS VERSION V 4.4.5B. Tooling package will INCLUDES A SELECTION FROM THE FOLLOWING LIST: 984494.5) Live Holders. 984511.6) End Working(Front or Back. 20mm opening) 984691.1) Double turret end. 984462.7) Turn holders. 984528.4) End Live(Face) 984553.2) Angle Live Tool(new $8.000) 984513.7) Drill Holders for ER16 Collets. 984465.1) Cutoff holder. 984690.4) Turret end working. Approx 54 Collets and 60 Guide Bushings(Range from 5/32" to 1" Guide Bushing Housings: Six(6) sizes: 1" 1-1/32" 1-1/16" 1-1/8" 1-3/16" And 1-1/4" Machine: 130" x 80" x 112" w/mistbuster on top 10.500 lbs. Pallet w/misc. tooling: 55" x 34" x 55" 400 lbs. Chip Conveyor: 118" x 25" x 55" 500 lbs. Barfeed tube: 176" x 20" x 50" 150 lbs. 2 Machines Available* Contact Steve Beck for more information. 303-651-6545. Steve@automatics.com.
|
|
|
SC25 WARNER & SWASEY "M4500" 4-AXIS CNC TURRET LATHE#27082
Quote# 27082. SC25 WARNER& SWASEY"M4500" 4-AXIS CNC TURRET LATHE Remanufactured 2001. Job Number 242, Model SC25, EQUIPPED WITH: GE/Fanuc Series 16-TT CNC Control(Swing-Away Type) 4-Axis Machine Design 20-Degree Slant-Bed Design 24" 3-Jaw Power Chuck w/Power Chuck Wrench(Internal/External Chucking Capabilities) 11 Turret Positions Including: 6-Position Side Turret and 5-Position End Turret Hardened Bed Ways- Chip Conveyor 60 HP Variable Speed Drive DC Motor CATALOGUE SPECIFICATIONS: Hole thru Spindle. 6.25" Chuck Diameter. 24" Swing Over Bed Ways. 28" Swing Over Carriage Wing. 25" Swing Over Cross-Slide Way Block. 21" Spindle to Turret Face. Maximum. 61.19" Side Turret Cross Travel. 13.75" Side Turret Longitudinal Travel. 47.07" End Turret Cross Travel. 15.25" End Turret Longitudinal ... moreTravel. 47.07" Spindle Motor. Horsepower. 60 HP DC. Floor Space Required. L x D. 20'4" x 8'6" Weight. Approximately. 27000 LBS. NOTE: This Machine Was Completely Rebuilt& Remanufactured By Kentucky Rebuilders In 2001. Previous Owner Advises There Is Only About 1000 Hours Usage Since Rebuild. PRICE: F.O.B. OUR WAREHOUSE. $39.500.00. ALL MACHINES/EQUIPMENT SUBJECT TO PRIOR SELL.
|
|
|
Hitachi Seiki LS-3 CNC Lathe
I am selling this Hitachi Seiki LS-3 CNC Lathe. It has a Fanuc 3T Controller for only $4.850 opening bid. I also have 2 other CNC Machines I am selling too. They are not included in this auction but can be purchase separately. They are 1) Valiant Turn CNC Lathe with a Fanuc 10T controller for only $4,850. It comes with the turret and the Tailstock. It has been sitting for about a month but was running before that. I am selling it for just $4,850. 2)Hitachi Seiki 5NE CNC Lathe with a Fanuc 6T controller. The machine has a little surface rust on it, but it will clean up nice. It has a large chuck. I believe it is a 15” chuck along with the Turret and the Tailstock. I am selling that for $4,850 also. Altogether they would cost $14,550, but I would be willing to sell all(3) for $13,000. I have attached photos on all 3 machines. The photos for ... moreHitachi Seiki LS-3 CNC Lathe are the first 3 photos. You can also contact me if wish to buy them before the deadline. I am pretty sure they will sell fast. Contact me through Ebay if you have any questions or at eagles1963-at-comcast-net NO SCAMMERS!
|
|
|
MORI SEIKI SL-3 CNC LATHE TURNING CENTER MILL MILLING -- NO RESERVE -
NO RESERVE AUCTION WITH FREE LOADING YOU CAN REACH US AT 610-521-5080 Free Shipping Quote Any where in USA- please send me your Zip MAKE: MORI SEIKI MODEL: SL-3 SN: S06238-1-10 CONTROL: YASNAC SWING 19 IN CENTER: 21 IN TURRET- SIX POSITION We just pulled this machine out of a local machine shop. The owner of this machine told us this machine runs it just needs one Hydraulic Valve. If you look at the pictures, The very last picture is the group of hydraulic valves it just needs one replaced. Please Double Check the Specs on this Machine we got them from the owner of this machine. We just picked this machine up from a local machine shop. They just replaced it with a larger machine. It was running the day it was disconnected. is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located ... morenext to the Philadelphia Air Port. I will be Happy to answer any questions you may have. Machine is being sold as is. The specs on this machine are subject to buyers inspection. Some of the specs we pulled from the internet of this same machine and year: We have Excellent feedback rating. Our goal is to keep you. Our customers satisfied. We can Deliver this Machine and place it on your shop floor if you are in a 4 hour range from Philadelphia for an additional Fee. We will Load this onto any truck or trailer for FREE. Cross country Transportation: You can get a great rate by calling 1-888-651-0566This is the Trucking company that we use. Please check out our other forklifts. Machinery, and accessorizes on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 lbs Industrial Plant Service Millwrights- Riggers- Plant Relocation- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
|
|
|
Star SR-10J Type C Swiss Type CNC Lathe FMB MiniMag Barfeed Live Tool C Axis 11
2011 Star SR-10J Type C Swiss Type CNC Lathe Specifications: Control. Fanuc 18iTB Max Machining Diameter. 10mm Max. Head stock Stroke: Stationary GB. 135mm Revolving GB. 105mm Number of Tools. 6 4-Spindle Sleeve Holder Number of Tools. 4 Front/4 Back Max. Drill Capacity. 6mm Power Driven Attachment Number of Tools. 3 Max. Drilling Capacity. 4mm Main Spindle Indexing. C-Axis Main Spindle Speed. 15.000 RPM Main Spindle Motor. 2.2 KW Power Driven Attachment Spindle Speed. 10.000 RPM Power Drive Attachment Motor. 5 KW Back Working Attachment Specifications Max. Chucking Dia. 10mm Max. Length For Front Ejection. 70mm Max. Parts Projection Length. 20mm Sub Sp
|
|
|
HURCO TM-6 SLANT BED CNC LATHE I-MAX CONTROL - NEW 2008 ONLY 6-HOURS ON SPINDLE
2008 HURCO TM-6 CNC SLANT BED LATHE/TURNING CENTER PURCHASED NEW FOR SCHOOL BUT NEVER USED. 6) TOTAL HOURS ON SPINDLE HURCO I-MAX CNC CONTROL TRAVELS: X-AXIS- 7" Z-AXIS- 14" RAPID TRAVERSE: X-AXIS: 750 IPM. Z-AXIS: 945 IPM SWING OVER CROSS SLIDE: 9.44" DISTANCE BETWEEN CENTERS: 15.86" MAX CUTTING DIAMETER: 12.44" MAX CUTTING LENGTH: 13.38" BAR CAPACITY: 1.77" SPINDLE SPEEDS: 6.000 RPM MOTOR PEAK: 17.5 HP NUMBER OF TURRET STATIONS: 12 TOOLS EQUIPPED WITH: TAILSTOCK 6" 3-JAW CHUCK w/ JAWS TOOL PRESETTER COOLANT SYSTEM ALL OPERATION AND PROGRAMMING MANUALS FOR MORE INFORMATION CONTACT GARY@949-246-2978 or email: gary@ptsmachinery.com
|
|
|
Mazak QT-15N CNC Turning Center Lathe Mazatrol T32-2 Tool Eye Tailstock 1990
1990 Mazak QT-15N CNC Turning Center w/ 2" Bar Capacity Machine runs well and can be seen under power as needed Specifications: Control…Mazatrol T32-2 Max. Bar Capacity.2" Chuck. 8” Max. Swing Over Bed. 17.32" Max. Swing Over Cross Slide. 10” Max. Cutting Diameter. 11.81" Max. Cutting Length. 19.69” X Axis Travel. 7.09" Z Axis Travel. 20.08" Spindle Nose. A2-6 Spindle Bore. 2.44” Spindle Speeds. 4.500 RPM Spindle Drive Motor. 20 HP Tool Capacity. 8 Tools Cutting Feed Rate. 197 IPM Rapid Traverse Rate. 1.180 IPM Cutting Feedrate. 197 IPM Machine Dimensions. 93” x 59” x 71” Machine Weight. 9.260 Lbs. Equipped
|
|
|
Haas SL-40 CNC Turning Center Lathe 4" Bar Capacity Tailstock Toolsetter 2007
2007 Haas SL-40T CNC Turning Center w/ 4" Bar Capacity Machine is in excellent running condition and can be seen under power as needed Specifications: Control. Haas. X-Axis Travel. 17” Z-Axis Travel. 44" Chuck Size. 15" Max Bar Capacity. 4" Dist. Between Centers. 51" Max Cutting Diameter. 25.5" Max Cutting Length. 44" Spindle Speeds. 2.400 RPM. Turret Stations. 10. Machine Dimensions: 86”H x 189.5”W x 24”D. Machine Weight: 25.000 LBS. Equipped With: Haas CNC Control-Programmable Tailstock-High Pressure Coolant-Chip Conveyor-Extra Performance Option-Remote Jog-Auto Tool Pre-setter-Spindle Orientation-High Intensity Lighting Please contact Jason Stob 708 790-3358 with any questions Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. ... moreWe have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of
|
|
|
1994 DAEWOO PUMA 15 CNC LATHE, 31" Swg, 62" cc, FANUC 16T, 18" HYD. Chk
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 1994 DAEWOO PUMA 15 CNC LATHE. 31" Swg, 62" cc, FANUC 16T, 18" HYD. Chk Ref# 151856 iammdna XCNCTC DAEWOO PUMA 15 CNC TURNING CENTER. NEW: 1994. SPECIFICATIONS: SWING OVER BED. 31.10" ... moreSWING OVER CARRIAGE. 21" MAX TURNING DIAMETER. 26" DIST BTWN CENTERS. 62" X-AXIS TRAVEL. 14.5" Z-AXIS TRAVEL. 62" SPINDLE MOTOR. 40/49 HP. SPINDLE SPEED. 2.000 RPM. SPINDLE NOSE. A2-11. SPINDLE BORE. 5.2" BAR CAPACITY. 4.62" TOOL CAPACITY. 12 STATIONS. TAILSTOCK QUILL TAPER. MT#6. TAILSTOCK QUILL TRAVEL. 6" APPROX MACHINE DIMS. 15'8" X 100" X 93" APPROX MACHINE WEIGHT. 30.100 LBS. EQUIPPED WITH: FANUC 16T CNC CONTROL. 18" 3-JAW KITAGAWA CHUCK. TAILSTOCK. CHIP CONVEYOR. Machine Location: HARRISON. NJ Click Here For More Daewoo Machines Click Here For More CNC Machines- CNC TURNING CENTERS- CNC LATHES(s) Questions about this Machine? Call Mike at(800) 873-6224 ext 7540 Need a Freight rate? Call Alex. Our recommended trucking and shipping broker at(973) 732-3274 effepbdc Finance This Equipment For Your Business- Click Here Buy With Confidence. Machinery Values is one of the world's largest machinery dealers. In business since 1971. All used items bought from our eBay store are covered by a standard MDNA(Machinery Dealer's National Association) 30 day return privilege. Which m
|
|
|
Hardinge Talent 6/45 CNC Lathe Live Tooling C Axis Option and Tooling Package
ITS YOUR RESPONSIBILITY TO READ THE ENTIRE DESCRIPTION BEFORE BUYING OR MAKING OFFERS. IF YOU PLAN ON HANDLING FREIGHT YOU MUST CONTACT US ASAP AFTER PURCHASING. OTHERWISE WE WILL PROCEED TO QUOTE FREIGHT. BUYER PAYS FREIGHT. DO NOT PAY UNTIL INVOICED. ANY QUESTIONS CONTACT SELLER. QUESTIONS/ANSWERS MAY BE POSTED TO AUCTION. THIS PACKAGE IS COMPLETE ARE READY TO START PRODUCING PARTS. Item#2101* SEE VIDEO AT BOTTOM OF DESCRIPTION* Your bidding on a used Hardinge Talent 6/45 CNC Lathe Live Tooling C Axis Option and Tooling Package. Make: Hardinge Year: 2004 Serial Number: BLA-249 Model: Talent 6/45 MPN: BLAA4G0070 Cutting Hours: 417 hrs! Control: Fanuc Series OiTC Turret problem: There are two problems. When the machine is turned on and being referenced. The turret will not reference correctly until it has been on for an hour or two. The second ... moreproblem is the indexing motor is slightly out of time with the cervix coupling causing a slight movement and clunk when the turret clamps. Our Hardinge service man is at a loss as to what to do. Once the machine is on and warmed up it runs fine. Other than the turret issue. The machine is in excellent shape. There is no spindle noise and regularly held tolerances of +/0.0001. 90% of its work has been on A2, S7, or 420 steel. Items that will be included with lathe: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Coolant tank, Tooling in machine! T1- Rough Turning Tool, T2- Finish Turning Tool, T3- Finish Turning Tool, T4- Drill, T5- Drill, T6- Drill, T7- Plug, T8- Boring Bar Holder 3/4" T9- Threading Tool, T10- Axial Live Tool, T11- Radial Live Tool, T12 Cut-off Tool Box of Extras! 5 Steel Plugs, 1 Plastic Plug, Boring Bar Holders 1/4" 5/16" 3/8" 1/2" 5/8" and 3/4" Axial Live Holder, 10 Sets of Spindle Liners, Live Center, Tooling Height Block, Chuck Wrench, Live Tool Wrenches, Spindle Liner Wrench, Air Hose& Gun Three jaw chuck Manuals Box of leveling pads Wooden box containing old spindle. Noisy but could be
|
|
|
Hardinge Talent 6/45 CNC Lathe with Live Tooling C Axis PLUS Tooling Package
Updated 1/25/14: We updated the title and title in description to clarify what your bidding on. It was stated"Hardinge Talent 6/45 CNC Lathe with Live Tooling C Axis option and Tooling Package" this lathe does have Live Tooling WITH C Axis. ITS YOUR RESPONSIBILITY TO READ THE ENTIRE DESCRIPTION BEFORE BUYING OR MAKING OFFERS. IF YOU PLAN ON HANDLING FREIGHT YOU MUST CONTACT US ASAP AFTER PURCHASING. OTHERWISE WE WILL PROCEED TO QUOTE FREIGHT. BUYER PAYS FREIGHT. DO NOT PAY UNTIL INVOICED. ANY QUESTIONS CONTACT SELLER. QUESTIONS/ANSWERS MAY BE POSTED TO AUCTION. THIS PACKAGE IS COMPLETE ARE READY TO START PRODUCING PARTS. Item#2101* SEE VIDEO AT BOTTOM OF DESCRIPTION* Your bidding on a used Hardinge Talent 6/45 CNC Lathe with Live Tooling C Axis PLUS Tooling Package. Make: Hardinge Year: 2004 Serial Number: BLA-249 Model: Talent ... more6/45 MPN: BLAA4G0070 Cutting Hours: 417 hrs! Control: Fanuc Series OiTC Turret problem: There are two problems. When the machine is turned on and being referenced. The turret will not reference correctly until it has been on for an hour or two. The second problem is the indexing motor is slightly out of time with the cervix coupling causing a slight movement and clunk when the turret clamps. Our Hardinge service man is at a loss as to what to do. Once the machine is on and warmed up it runs fine. Other than the turret issue. The machine is in excellent shape. There is no spindle noise and regularly held tolerances of +/0.0001. 90% of its work has been on A2, S7, or 420 steel. Items that will be included with lathe: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Coolant tank, Tooling in machine! T1- Rough Turning Tool, T2- Finish Turning Tool, T3- Finish Turning Tool, T4- Drill, T5- Drill, T6- Drill, T7- Plug, T8- Boring Bar Holder 3/4" T9- Threading Tool, T10- Axial Live Tool, T11- Radial Live Tool, T12 Cut-off Tool Box of Extras! 5 Steel Plugs, 1 Plastic Plug, Boring Bar Holders 1/4" 5/16" 3/8" 1/2" 5/8" and 3/4" Axia
|
|
|
Mazak QT-8G CNC Gang Tool Turning Center Lathe Mazatrol EIA-T 1987
1987 Mazak QT-8G CNC Turning Center w/ Gang Tool Machine runs well and can be seen under power as needed Specifications: Control… Mazatrol EIA-T Swing over Bed… 11” Max. Turning Diameter… 6” Max Bar Capacity… 1.62" Max Turning Length… 10" Spindle Bore. 1.92” X Axis Travel. 3.75” Z Axis Travel. 11.4” Spindle Nose… A2-5 Spindle Speeds… 45-4.500RPM Spindle Motor(30 Minute rating) 10 HP Gang Tool Stations. 8 Machine Dimensions. 75”x48”x67” Machine Weight. 6.000 Lbs Equipped With: Collet Chuck Manuals EIA-T Control Please contact Jason Stob 708 790-3358 with any questions Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose ... moreof obtaining shipping quotes our Zip Code here is 60007. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(520 Machinery Sales LLC and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particul
|
|
|
MORI SEIKI SL-7 2-AXIS CNC SLANT BED LATHE
1981 MORI SEIKI MODEL SL-7 CNC 2-AXIS SLANT BED LATHE FANUC 6T CNC CONTROL w/ 9" MONITOR DISPLAY& RS-232 PORT MAX. SWING: 35.8" MAX. TURNING LENGTH: 61" X-AXIS TRAVEL: 15.7" Z-AXIS TRAVEL: 61" SPINDLE BORE: 4.1" SPINDLE SPEEDS: 1010 RPM TURRET: 12 TOOL STATIONS MAIN MOTOR: 50-HP TAILSTOCK w/5 MT HYDRAULIC 15" 3-JAW CHUCK w/ JAWS SPINDLE NOSE: A1-11 CHIP CONVEYOR COOLANT SYSTEM WORK LIGHT OPERATION AND PROGRAMMING MANUALS FOR MORE INFORMATION CONTACT GARY@949-246-2978 or email:
|
|
|
33" X 236" RACER MODEL RCM 6M FLAT BED CNC LATHE
2008 RACER MODEL RCM 6M FLAT BED CNC LATHE Specifications: Max Swing Over Bed.33.5" 850mm) Max Swing Over Cross Slide.20" 510mm) Distance Between Centers.236" 6000mm) Spindle Bore.6" Spindle Motor.30 HP Spindle Speed.6- 1000 RPM(3 Speed Trans) Equipped With: FANUC 18iTB Controll 4 Position Electric Tool Change Chip Auger Coolant Tray and Coolant System Back Splash Guard 22" 4-Jaw Chuck(5) Steady Rests Price $97.000.00 For More Information Please Call Maury Cohn 1 800 888 4312
|
|
|
1995 MAZAK INTEGREX 30Y CNC LATHE w/20 TOOL ATC, LIVE TOOLS, 12" Chk
THIS IS A VERY NICE TIGHT MACHINE THAT IS WORKING DAILY IN MY SHOP. I AM NOT A BROKER OR LIQUIDATION COMPANY THAT HAS NO REAL HISTORY ON THE MACHINE BEING SOLD. THIS MACHINE IS IN TOP SHAPE AND YOU CAN COME RUN IT OR I CAN RUN SOME PARTS FOR YOU BEFORE BIDDING OR BUYING. IF YOU ARE NEW TO THESE CNC MACHINES I CAN GO OVER THE BASIC OPERATION WITH YOU TO GET YOU STARTED. I HAVE A LOT OF TOOLING, TOOLS, INSERTS, ETC. THAT GO WITH IT. DRILLS, BORING BARS, SLOTTERS, CUTTERS, ETC) MAZAK INTEGREX 30Y/1000 CNC LATHE. NEW: 1995 SPECIFICATIONS: CHUCK SIZE. 12" HYD. CHUCK MAX. SWING/ OVER CARRIAGE. 20" 15.75" MAX. CUTTING DIA.LENGTH. 20" 40" TRAVEL X-AXIS. 17.75" TRAVEL Y-AXIS. +/ 3.5" TRAVEL Z-AXIS. 40.5" SPINDLE NOSE/BORE. A2-8/ 2.50" SPINDLE SPEED. 35- 3.500 RPM SPINDLE HP CONT/ 30 MIN. AC 35/30 HP ROTARY ... moreTOOL SPINDLE NOSE. 40 TAPER ROTARY TOOL SPINDLE SPEED. 15-6000 RPM ROTARY TOOL SPINDLE HP. AC 10 HP RAPID TRAVERSE X/Y/Z. 393/ 472/ 708 IPM MAGAZINE CAPACITY. 20 POSITION ATC MACHINE DIMENSIONS. 216"x89"x120" MACHINE WEIGHT. 14.330 LBS EQUIPPED WITH: MAZATROL T-PLUS- TOOLEYE- 12" 3-JAW HYD. CHUCK- 20 POSITION TOOL CHANGER- TAILSTOCK- CHIP CONVEYOR- MANY TOOLHOLDERS TOOLS INSERTS AND MANUALS DO NOT TRY TO MAKE PAYMENT UNTIL YOU TALK TO ME FIRST.
|
|
|
Haas ST-30T CNC Turning Center Lathe w/ Live tool Tailstock 30hp 3" Bar SL-30
2010 Haas ST30 CNC Turning Center w/ Live Tooling"Under 3.000 hours on the spindle" Machine is in excellent condition and can be seen under power as needed Specifications: Control. Haas Max Swing Over Apron. 31.5" Max Cutting Dia. 21" Max Turning Length. 26" X-Axis Travel. 12.5" Z-Axis Travel. 26" Rapid Traverse Rates. 945 IPM Max Bar Capacity. 3" Spindle Bore. 3.5" Spindle Nose. A2-6 Spindle Speeds. 3.400 RPM Max Torque. 300 ft-lb@ 500 RPM Spindle Motor. 30 HP Turret Stations. 12 Machine Weight. 16.000 lbs Machine Dimensions(Approx.150"L x 77"W x 74"H Equipped With: Live Tooling Capability Programmable Tailstock Rigid Tapping Parts Catcher Automatic Tool Presetter H
|
|
|
2007 Hardinge Talent 6-45 CNC Lathe w/ Fanuc 0i-TC Control Excellent!
2007 Hardinge Talent 6-45 CNC Lathe w/ Fanuc 0i-TC Control Excellent! Click to View Image Album Click to View Image Album Click to View Image Album 2007 Hardinge Talent 6-45. One owner, always on oil coolant, CNC lathe. Just 2000 hrs. of on time w/ probably less then 1/3 of that as run time. The following information is straight from the original Hardinge invoice. 4 Morse taper tailstock, A2-5 to 16C collet adaption chuck, ER32 collet holder, new 6" power 3 jaw chuck, 5 ea. boring bar holders, all manuals. CNC lathe is under power in Costa Mesa, CA. This machine looks more like a demonstrator then a used machine. Original price was over $80K. We ship to the USA only. Not because we don't like our neighbors but because it costs too much to do business with them. If the item has a starting price over $100. go ahead and bid from Canada ... moreor Mexico. We now accept Visa& Mastercard on our commercial auctions plus PayPal if you must. We ship via USPS. Cheapsest way,but prefer to ship via UPS as we have daily pickup which offers a much lower rate then counter service rates. That means we are shipping at the lowest rates UPS offers. If we ship to a stand alone business the UPS rate is usually $2.50 less. If your business has a separate driveway entrance from any residence; state that and request the B to B rate. We normally ship the same day as payment arrives. CA residents must pay sales tax on our commercial auctions. If your item is in the 150 pound or higher range we are currently using YNR, formerly Yellow, a nationwide LTL carrier, or Premier Transportation a specialized machinery mover. If you wish to get a freight quote you must call us at(949)645-7601. Most machines move at freight class 85 and they are moving from MarMachine at Zip 92627. We charge 10% for packaging and it is included in the UPS charge when you get a final auction settlement. Since eBay now takes 9% of the shipping cost as a fee we get to use the other 1% to buy shipping containers and packaging material. Occaisionly we have a difficu
|
|
|
1995 Hardinge Conquest CNC Lathe Loaded w/ Tooling Very low hours!!
1995 Hardinge Conquest CNC Lathe Loaded w/ Tooling Very low hours! Click to View Image Album Click to View Image Album Click to View Image Album The former owner estimated this lathe had run no more then 40-50 hours in the last five years hence the very low hours on the clock. It was used exclusively for R& D parts for a large manufacturing firm. Currently equipped with an unused 8" hydraulic 3 jaw chuck. 20C collet nose, Renisaw tool presetting system, tailstock& 6 position live C axis. It also includes two quick change coolant tanks; one for oil and one for water base flood coolant. Tooling includes 5 Hardinge live tool drivers, lots of drill/ boring bar holders, bar puller, parts catcher, all manuals and some small Hardinge lathe accessories. Has Fanuc 18-T control& operates on 220V 3 phase. We ship to the USA only. Not ... morebecause we don't like our neighbors but because it costs too much to do business with them. If the item has a starting price over $100. go ahead and bid from Canada or Mexico. We now accept Visa& Mastercard on our commercial auctions plus PayPal if you must. We ship via USPS. Cheapsest way,but prefer to ship via UPS as we have daily pickup which offers a much lower rate then counter service rates. That means we are shipping at the lowest rates UPS offers. If we ship to a stand alone business the UPS rate is usually $2.50 less. If your business has a separate driveway entrance from any residence; state that and request the B to B rate. We normally ship the same day as payment arrives. CA residents must pay sales tax on our commercial auctions. If your item is in the 150 pound or higher range we are currently using YNR, formerly Yellow, a nationwide LTL carrier, or Premier Transportation a specialized machinery mover. If you wish to get a freight quote you must call us at(949)645-7601. Most machines move at freight class 85 and they are moving from MarMachine at Zip 92627. We charge 10% for packaging and it is included in the UPS charge when you get a final auction settle
|
|
|
1992 MAZAK QUICK TURN 18 CNC LATHE CHUCKER T-32 NO RESERVE
NO RESERVE! 1992 MAZAK QT-18 CHUCKER. NO TAILSTOCK) BIG BORE, 2-3/4 SPINDLE HOLE. 10" CHUCK, SUPER NICE MACHINE, T-32 CONTROL. RIGHT FROM SERVICE, WE WILL LOAD FREE OF CHARGE, CAN HELP ARRANGE ECONOMICAL SHIPPING CARRIER. EMAIL ANY QUESTIONS.
|
|
|
HAAS SL-30 CNC Lathe 2005
Haas SL30- 2005 CNC LATHE Chuck Size: 10.0 in Bar Capacity: 2.5 in# Axis: 2 Power: 30.0 hp RPM: 3400 rpm Turning Dia: 17.0 in Tool Presetter Swing: 30.0 in Centers: 39.0 in Tailstock(Yes/No) No Dimensions: 150 x 77 x 74" Weight: 16000 lb Control: HAAS We are the owner of the machine and not a dealer. We no longer have a use to the equipment so we have taken it out of service and put it up for sale. The machine can be hooked to power and operated for serious inquiries. This is a great deal for someone who needs the capacity NOW and doesn't want to pay dealer mark ups or reseller commissions! We will load this on to your truck at no cost to you!
|
|
|
Kia Kit 30b CNC Lathe---Turning Center
We are selling 1993 Kia Kit 30B CNC Lathe. It is gang style CNC Lathe. It comes with a Fanuc O-Mate-T Controller. There is also a separate Controller Panel going with it. It was move to storage about 3 weeks ago but was running fine before that. The specs on the machine are below. Contact me through Ebay if you have any questions or e-mail me at eagles1963{at}Comcast{dot}net. I will only be listing this one time. There is another buyer who is interested in buying next week if it does not sell. If you are interested in buying before the auction ends. Then contact me to make arrangements. There is a $850 to load.
|
|
|
Mori Seiki SL-150 SMC CNC 2 spindle lathe - live tooling and with bar feeder
Very good condition Mori Seiki 2 spindle lathe. Live tooling. Lightly used in prototyping shop. Set up and running. Has Mori Seiki bar feeder as in photo. Has chip conveyor. Great machine for production of relatively small items. Seller is a prototyping shop, not a machine tool dealer. Max turning dia: 10.2" Max turning length: 13.8" Spindle: 50-5.000 RPM. Turret stations for live tooling machining. Turret index time approx. 0.2 seconds. Z axis: approx 20.5" X axis: approx 9.1" Mori Seiki MSC 501 Fanuc style control. Has manuals and documentation. Contact seller to inspect. Contact seller to coordinate loading and shipping if buyer needs assistance to move. Buyer pays for all loading and shipping costs and assumes responsibility for machine as soon as pick-up. Loading begins. Listed shipping cost is only for our shop's ... morepersonnel to assist with disconnect, coordinate with rigger.
|
|
|
Mazak SQT-100MSY CNC Lathe Live Tool Sub Spindle Turning Center Mazatrol
SQT 100 MSY with live tools. Y axis milling, and sub spindle. Includes 5 live tool holders and 11 static tool holders, and Kitagawa chucks. Machine has a chip conveyor. Excellent running condition and holding tight tolerance. Many control options including EIA(G code) rigid tapping,and live tool rigid tapping. We welcome inspection and the machine is under power. Call John at 229 686 8274 to arrange inspection. Payment by wire transfer, shipping is the responsibility of the buyer. We will help arrange shipping and rigging.
|
|
|
Emco Compact 5 PC Personal computer controlled lathe mini CNC
This is a used item cnc pc run lathe Pictures of the lathe in auction. Lathe only. Emco compact 5 PC Technical data(taking from online manual) Center height 65mm(2.5591" Distance between centers 310mm(12.205" I have seen this also as spec as 13.78" Swing over bed 130mm(5.118" Swing over cross slide 60mm(2.362" Tailstock taper MT1 Tailstock stroke 35mm(1.378" Hole through spindle 16mm(630" Spindle taper MT2 Speed range 200-2400 RPM Power(60% duty cycle) 800W This was run only with linux cnc to check out. This is the lathe only. all you other people with stock compact 5 pc lathes- give it a try! Linuxcnc is free and open source and seems to run this lathe very well) If you want to control this lathe with mach you have to modify the emco interface. This yahoo group is a good reference- Check out the file section ... morealso. you need to sign up) Free pickup for shipping we have a $50.00 charge making a Box.
|
|
|
Haas SL-30T BB Big Bore CNC Turning Center Lathe Tailstock 40hp 4" Bar Rigid Tap
1999 Haas SL-30T BB Big Bore CNC Turning Center Machine is in excellent condition and can be seen under power as needed Specifications: Control. Haas Chuck Size. 15" Max Bar Capacity. 4" Max. Cutting Diameter. 17" Max. Swing. 30" Distance Between Centers. 39" Spindle Speeds. 2.400 RPM Spindle Motor. 40 HP Spindle Nose. A2-8 Turret Stations. 12 Machine Dimensions: 86”H x 189.5”W x 24”D Machine Weight: 25.000 LBS Equipped With: 15" 3 Jaw Chuck 4" Big Bore Option Programmable Tailstock Rigid Tap 3.5" Floppy Disk Drive Chip Auger Tool Presetter Please contact Jason Stob 708 790-3358 with any questions Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of ... morethe auction. All items are subject to prior sal
|
|
|
1994 Bridgeport Romi EZ Path CNC/Manual Lathe Teach Lathe Turning Center 8"
1994 Bridgeport EZ-Path CNC/Manual Lathe Specifications: Control. Bridgeport EZ Path Control Swing Over Bed.16.5" Distance Between Centers.40" Swing Over Cross Slide.8.6" Spindle Nose.ASA A-2-5" Hole Thru Spindle.1.970" Spindle Speeds.25-3.000 RPM X-Axis Travel. Cross Slide.8.6" Z-Axis Travel. Longitudinal.40" Tailstock Quill Travel.6.3" Quill Taper Hole.MT No. 4 Main Motor.8 H.P. Approximate Weight.4.500 LBS Equipped With: EZ-Path CNC Control With Floppy Disk Drive Tailstock 8" 6-Jaw Chuck Dorian Tool Post With Holders RS-232 Serial Port Work Light Collet Closer& Collet Tube Automatic Lubrication Leveling Pads Please call Jason Stob 708-790-3358 with any questions. Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. ... moreWe have the right to resell the item if it is not paid i
|
|
|
2007 ROMI M20 M-20 M 20 CNC LATHE TOOLROOM FLATBED ENGINE FANUC 12" CHUCK
2007 Romi M20 CNC Lathe 20" Swing x 60" Between Centers Fanuc 21iT Control Our Stock Number 1370-021214 Machine Description ROMI M 20. FANUC 21iT, 20" SW, 60" CC, 12" CHUCK, TAIL Serial# 022-092862-404 Year: 2007 Specifications: are accurate to the best of our knowledge) SWING OVER BED 20.47" SWING OVER CARRIAGE WINGS 17.72" SWING OVER CROSS SLIDE 10.24" CENTER DISTANCE 60" X AXIS TRAVEL 11.02" Z AXIS TRAVEL 60" SPINDLE SPEED 3- 3.000 RPM SPINDLE NOSE A2-6 HOLE THRU SPINDLE 2.56" SPINDLE MOTOR 15 HP TAILSTOCK QUILL TRAVEL 5.11" TAILSTOCK QUILL DIAMETER 3.15" TAILSTOCK TAPER HOLE MT#4 APPROX. DIMENSIONS 144" x 65" x 65" APPROX. WEIGHT 8.000 LBS Equipped With: FANUC 21iT CNC CONTROL WITH 10.4" LCD SCREEN RS-232C PORT INTERFACE FOR DNC OPERATION MANUAL. ... moreTEACH& RUN MODES, DUAL HANDWHEELS TOOL POST 12" MANUAL 3-JAW CHUCK FULLY ENCLOSED SPLASH& SAFETY GUARDING MANUAL TAILSTOCK. REMOVABLE CHIP PAN, CONSTANT SURFACE SPEED ALL AVAILABLE MANUALS, This machine is in very good working order. You may inspect under power. Any questions please call at 616-455-3800 SPECIFICATIONS ARE ACCURATE TO THE BEST OF OUR KNOWLEDGE. Shipping and Handling All orders are shipped via United Parcel Service(UPS) Ground to locations within the 48 continental United States if size and weight allow otherwise will be shipped best way. Shipping charges for orders shipped outside the 48 continental United States may be considerably higher. Most orders will be shipped within 2 to 5 business days after payment has been confirmed(weekends excluded) All orders are processed during business hours. Monday thru Friday from 8:00am to 5:00pm PST. Shipping cost is fixed. Please bid accordingly. No discounts will be given. Multiple auctions will not be shipped together. Payment We prefer wire transfer. Visa& MasterCard accepted thru PayPal only. Personal checks accepted. Allow 10 business days to clear this payment. No exceptions. Charney Machine& Tool
|
|
|
Hitachi Seiki HiCell 23 CNC Lathe Final Price Reduction
Hitachi Seiki HiCell CA23 CBC lathe. Machine is under power now. Upgraded CRT. Everything works as it should on this machine. Some tooling available. Buyer is responsible for rigging machine onto truck and all shipping costs. Control: Seicos L II-A Swing(Bed& Cross) 15.75" Distance Between Centers: 19.7" Chucking Capacity: 9.8" x 5.5" Spindle Bore: 3" Spindle Nose: A2-8 spindle Speeds: 20-3600 RPM Turret: 10 Station w/ 5 Live Tools Live Tool Motor: 5HP Rotary Tool Taper: NT40 Rotary Tool Speeds: 100-3000 RPM-Equipped With- Full"C" Axis Full Y-axis Slide Travel tailstock 12 Station ATC 10" 3-Jaw Power Chuck Tool Arm Automatic Chip Conveyor We accept bank wire transfer or cash on pickup for payment on this machine. We may accept a Paypal payment if all PayPal fees are paid by buyer. You are welcome ... moreto call if you have any questions- 913-980-0600 Posted with eBay Mobile
|
|
|
Haas TL-2 CNC Turning Center Toolroom Lathe Manual Tailstock USB Rigid Tap 2008
2008 Haas TL-2 CNC Toolroom Lathe"Under 2.000 hours on the spindle" Machine is in excellent condition and can be seen under power as needed- Specifications: Control. Haas Max Swing. 16" X-Axis Travel. 8" Z-Axis Travel. 48" Spindle Nose.A2-6 Spindle Bore. 3.00” Spindle Speed. 2.000 RPM Spindle Motor. 12 HP Chuck Size up to. 10” Max Cutting Diameter. 16” Max Cutting Length… 48” Machine Weight. 4.600 Lbs. Machine Dimensions. 78" x 101"x54.4” Equipped With: Haas Intuitive Programming Manual Tailstock 10” Manual Chuck Hi-Flow Coolant Pump Kit Rigid Tap Tool Post USB Port Please contact Jason Stob 708 790-3358 with any questions Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it i
|
|
|
1998 Clausing Colchester Storm 80 CNC Lathe Turning Center w/ Barfeed Fanuc 21-T
1998 Clausing Colchester Storm 80 CNC Lathe w/ Barfeed Machine is in excellent condition and can be seen under power as needed Specifications: Control.Fanuc Series 21-T X-Axis Travel.6.5" Z-Axis Travel.13.78" Spindle Speed.6000 RPM Spindle Nose.A2-5 Swing.16.54" Maximum Turning Diameter.6.69" Maximum Shaft Length.13.78" Bar Capacity.1.65" Rapid Traverse X/Z Axis.394/591 IPM Spindle Motor.15 H.P. Electronics.230/60/3 w/Transformers for 208/60/3 Approximate Weight w/Barfeed. 7.500 LBS. Approximate Machine Dimensions.117"L) x 74"W) x 73"H) Equipped With: RS-232 Port MBF 1000 Magazine Barfeed Chip Conveyor Programmable Tailstock 6" Collet Chuck(12 to 15) VDI-30 Tool Holders Parts Catcher Please contact Jason Stob 708 790-3358 with any questions Please Note! Skidding/Crating of items are extra ... morecosts. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items
|
|