In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
19995.00
Buy It Now
Condition: Used
Location: Pearisburg, United States
Model: SPM 710. Make: HERCULES. MAKE: HERCULES. SWING OVER BED: 32". 192 INDUSTRIAL PARK DRIVE. Model Year: 1995. 24" BED WIDTH. 188" BED LENGTH.
$
1600.00
Buy It Now
Condition: Used
Location: Essington, United States
Call (610) 521 - 8527 for local freight quotes. We have Landolls, Lowboys, Step Decks and Rollbacks for any size load. This machine starts right up and ... moreruns great. -We will load onto any open trailer for free.
1 2
 In 

Former Listings  
 
MONARCH 24-1/2" x 54" GEARED HEAD ENGINE LATHE - #60
aims MONARCH 24-1/2" x 54" GEARED HEAD ENGINE LATHE- 60 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST If the player doesn't work: Made in the U.S.A. by The Monarch Machine Tool Co. of Sidney. Ohio. This is a used Geared Head Engine Lathe in GREAT condition. Model# 60 Serial# 41583 Features: 15" Three Jaw Chuck. Flame-Hardened Bed-Ways. Gap Bed. Specifications: Swing: Swing Over Bed: 24-1/2" Swing Over Gap: 33" Swing Over Cross Slide: 16" Swing Over Compound Slide: 3" Capacities: Distance from Floor to Center: 46-1/2" Distance Between Centers: 54" Spindle: Mount: D1-6 Spindle Bore: 1-5/8" Number of Spindle Speeds: 16 Range of Spindle Speeds: 21 to 900 rpm. Threads: Inch Threads: 2 to 120 tpi. Carriage: Cross Slide Travel: 12-1/4" ... moreCompound Rest Travel: 6" Tailstock: Spindle Travel: 7" Taper of Center: 5 Morse Taper Spindle Diameter: 3" Bed: Width of Bed Face: 17-5/8" Length of Bed: 91" w/ 5" gap. General: Electrical: 480 Volt. Three Phase Overall Dimensions: 132" x 45" x 57" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. MONARCH 24-1/2" x 54" GEARED HEAD ENGINE LATHE- 60 MONARCH 24-1/2" x 54" GEARED HEAD ENGINE LATHE- 60 MONARCH 24-1/2" x 54" GEARED HEAD ENGINE LATHE- 60 MONARCH 24-1/2" x 54" GEARED HEAD ENGINE LATHE- 60 MONARCH 24-1/2" x 54" GEARED HEAD ENGINE LATHE- 60 MONARCH 24-1/2" x 54" GEARED HEAD ENGINE LATHE- 60 MONARCH 24-1/2" x 54" GEARED HEAD ENGINE LATHE- 60 MONARCH 24-1/2" x 54" GEARED HEAD ENGINE LATHE- 60 MONARCH 24-1/2" x 54" GEARED HEAD ENGINE LATHE
Monarch EE Toolroom Engine Lathe 10 X 30 Newall DRO 12.5" Swing - 480V/3PH
SKU: 2474109 A: 0013000000CXCfg O: 0065000000OW5mh PA: View Photo Gallery. Request Freight Estimate. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Monarch EE Toolroom Engine Lathe 10 X 30 Newall DRO 12.5" Swing- 480V/3PH. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Monarch Model: EE Type: Toolroom Lathe Serial No: 48638-AT Mfg. Date: 5/1967 Rebuilt ... more1975& 1990 Features/Specifications: Size Type: 10 x 30 Swing Over Bedways: 12.5" Swing Over Cross-Slides: 7.25" Distance Between Centers: 30" Spindle Speed Range: 25-4000 rpm Range of Threads: 3 to 184 tpi Hole Thru Spindle: 1.4" nominal) Center Taper: No. 2 MT Newall DP7 digital readout(x-y axis) Tailstock. Cross-slide& compount rest Flame-hardened bed Power: 480V- 11.9 FLA- 60 Hz- 3 PH 9.0 KVA three-phase transformer Coolant system Adjustable light Click here to learn more about the current models of Monarch EE lathes from the manufacturer's website. Dimensions& Weight: L 84" x W 45" x H 60" Shipping Weight: 4.500 lbs Condition: Good- working at time of decommission Normal wear from age& previous use in working industrial environment Regular. Thorough maintenance performed by previous owner since new Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-or- 2) is not bidding from a US-bas
Hendey 18"X80" Geared Head Engine Lathe 2 chucks, collet closer taper gunsmith
Used Hendey swing 18"X80" geared head metal lathe model 16X72 with D1-6 camlock spindle taper. This lathe has spindle speeds 8.5-574 rpm and threading 1.5-80tpi. Includes full chip pan. Thread dial, wrenches, a 10" 3 jaw chuck rev jaws, 12" 4 jaw chuck, taper attachment, micrometer stop, collet closer for 5C, and change gears. It has less than 1/8 turn backlash in the crossfeed and compound. It is powered by about a 5HP 3 phase motor and is currently wired for 480volt. The ways have no detectable ridges but has some dinges and scratches. The bore is 1 1/2" It runs fine, all functions work as they should. This lathe weighs about 4000 lbs. Call 314-750-1403 or email with questions. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. Missouri, forklift loading is free. ... moreEmail me for a shipping quote. Please check out my other auctions. Thanks for looking. This machine is for sale locally. So the auction may be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction to avoid neg feedback. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified. So please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days. buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner.
Lodge and Shipley Blue Chip 21 geared head engine lathe
Equipped With: 12-1/2 Hp Main Motor; Accessories 14" 3-Jaw Chuck. 18” 3 jaw chuck, 18” 4 jaw chuck, 2-24” face plates, steady rest. Taper Attachment; Live Center SN# 27319 Machine Specifications: Swing. 22" Swing Over Cross Slide/carriage. 14 3/4" Cross slide travel. 15" Distance Between Centers. 72" Spindle Speeds(12) 20 to 1000 rpm Spindle Bore. 3 5/8" Spindle Nose. D1-8 Threads(54) 2-112 TPI Metric(30) 25 to 14 mm Longitudinal Feeds(25) 0009" to.051" Cross Feeds(25) 0005" to.022" Taper In Tailstock. 5 MT Dimensions(appox) 126" l-r x 54" f-b x 60" h Weight(approx) 7.000 lbs Under power and fully useable for viewing and operation. Buyer to pay freight costs.
MONARCH ENGINE LATHE 17 1/2 x 168"
MONARCH ENGINE LATHE 17 1/2 X 168" Info: Model: 20" CM. Actual swing: 27.5" Distance between centers 168" THE MACHINE IS LOCATED IN MIAMI. FL WHERE WE CAN LOAD IT ON TO YOUR TRUCK AT NO EXTRA COST. IF YOU WILL LIKE TO COME INSPECT THE MACHINE BEFORE BIDDING OR YOUR BIDDING IS CONTINGENT UPON INSPECTING THE MACHINE. PLEASE INSPECT THE MACHINE BEFORE THE END OF THE AUCTION OR PLACING A BID. THE MACHINE IS USED AND HAS BEEN LISTED AT A GREAT PRICE FOR FAST SALE. ALL SALES ARE FINAL AND THE ITEM IS SOLD AS IS WHERE IT IS. NO WARRANTIES OF ANY KIND SINCE THE ITEM IS USED AND NOT NEW. BUYER IS RESPONSABLE FOR SHIPPING.
Clausing Colchester Engine Lathe 17"x60'
this is a used clausing colchester 17" lathe located at my home in Pennington N.J. It is in very good running condition and is fully tooled.Features are. 3 jaw chuck. 4 jaw chuck. full face chuck. Taper attachment. coolant system. New 20" tool post and tool holders.turning.Knurling,cutoff.has extra heavy duty cutoff tool. left and right turning and threading insert tools. Internal threading bar. Heavy duty boring bars. Bull live center. Heavy duty drill chucks. Hardinge 2j speed chuck with collets. Rocker style tool holders. Many new high speed tool bits. Steady rest. Motor has new kevlar pully belts. Anderson phase convertor included,runs on standard home 220 as in my garage.motor is 10 hp. Machine is clean and newly painted. Inch and Metric Threading. D1-8 spindle nose. Machine weight is 7000 pounds.very heavy. Due to the weight ... moreof this package. shipping arrangements will have to be made at time of sale.I have a local rigger that is very reasonable and will probably cover the tri-state area.he can also pickup the whole package and bring to a nearby over the road trucking co. Buyer is responsible for all costs. This item can be inspected under power in my garage.It will not be disconnected until sold. Questions call Pete@ 609-532-0016 ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-142074e2603-0xff-
VICTOR 20" x 80" GEARED HEAD ENGINE LATHE
aims VICTOR 20" x 80" GEARED HEAD ENGINE LATHE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Victor Machines. This is a used Geared Head Engine Lathe in working condition. Machine is missing the buttons that are normally there to control the coolant pump. Model# 2080 Serial# 71159 Victor Machines are quality machine tools that have been distributed in the United States for over 20 years. Since the introduction of the"VICTOR" brand name in 1976. Tens of thousands of Victor Machines have been installed in job shops and manufacturing facilities throughout the country and internationally, including many Fortune 500 companies. Features: Gap Bed. Induction Hardened Bedways. 10" Three Jaw Chuck. 12" Four Jaw Chuck. Steady Rest. Follow Rest. Specifications: ... moreSwing: Swing Over Bed: 20" Swing Over Gap: 28" Swing Over Cross Slide: 11" Swing Over Compound Slide: 4" Capacities: Distance from Floor to Center: 42-1/2" Distance Between Centers: 80" Spindle: Mount: D1-6 Spindle Bore: 2" Number of Spindle Speeds: 16 Range of Spindle Speeds: 25 to 1.500 rpm. Threads: Inch Threads: 4 to 56 tpi Metric Threads: 0.25 to 6 mm. Carriage: Cross Slide Travel: 10-1/2" Compound Rest Travel: 6" Tailstock: Spindle Travel: 5" Taper of Center: 4 Morse Taper Spindle Diameter: 2-1/2" Bed: Width of Bed Face: 14-1/4" Length of Bed: 96" with a 10" gap. General: Motor: 7.5 Horsepower Electrical: 440 Volt. Three Phase, 60 Hz Overall Dimensions: 123" x 38" x 48" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. VICTOR 20" x 80" GEARED HEAD ENGINE LATHE VICTOR 20"
CINCINNATI HYDRASHIFT 18 X 54 ENGINE LATHE
up for sell is a Nice lathe it has two chucks a 12" 3 jaw and 12" 4 jaw lathe does have some ware in the cross slide and in ways but it's a lathe that has been used it's going to. it has what looks to be a 1 1/2 threw hole it's wired for 480 30 amp the bottom shaft has a slight bend in it where it was moved doesn't effect the lathe in any way can be bent out but really no point until lathe is moved to it's place has the one set of jaws any questions please call or text 336 479 6847
19" x 150" Leblond Regal Engine Lathe Inch Metric DRO Aloris Tooling Buck Chuck
19 x 150 Leblond Regal Engine Lathe Inch/metric threading 4 steady rests! Steady rests are easily 1000.00 and up each USED! Aloris tool post and a lot of BRAND NEW tool holders. Over 3500.00 in toolholders and post DRO on Z(long) axis Taper Attachement Tailstock center. Drill chuck various morse taper sleeves. I have been in the machine shop business for 20 years. i bought this machine in 2006 for a specific customers parts. Needless to say they promptly went belly up and the work I purchased it for never materialized. I have kept it. But I run one or two jobs a year on it and I just am not getting return on my investment. Machine works excellent and is dead on accurate. It has a 12" adjustable Buck Chuck. 4 steady rests, Aloris"C" toolpost and I bought all new holders when I bought the machine. I cannot load the machine for ... moreyou.however I will split the cost of an INSURED rigger. To load it for you. I have already had this quoted at 750.00 I would love to tell you I can load it. But if it got damaged during loading both of us would be out of luck(and money) Electric is 220/440 3 phase
Sharp 1330 Engine Lathe with Taper Attachment & Tooling FREE Shipping
Sharp Engine Lathe Model 1330 s/n 23163 D1-4 camlock spindle 45-1800 rpm(12) speeds 3HP 230V 3ph Motor Equipped with: 6" 3 jaw chuck 6" 4 jaw chuck Aloris type toolpost& 5) holders Live center Taper attachment Foot brake In very good condition Perfect lathe for the small shop! FREE SHIPPING ORDERS? QUESTIONS? CALL US 866-532-2962 This item is subject to prior sale. We reserve the right to end an auction early. Return privilege: We offer an exclusive 30 day return privilege. If you are not satisfied with your purchase. Simply send the item back in its original condition for a full refund. We are not responsible for third party charges, such as: rigging, shipping, installation, and service work. Shipping/Freight Shipping is on us with"Buy it Now. Residential delivery and liftgate are additional charges. Item may be picked ... moreup and loaded at our Phoenix location at no charge. Local delivery is available. You are welcome and encouraged to check out this machine under power at our Phoenix facility. Please contact us for an appointment.
Tarnow Gap Bed Engine Lathe #945023
Please Refer To Machine# 945023 Tarnow 15 L3524 Lathes- Gap Removable Gap Swing: 20.67" Over Bed. 12.87" Over Saddle, 29.64" In Gap( 9.75" Length of Gap) Manufacturer: Tarnow Removable Gap Engine Lathe. Model No. TUJ-50X2500. Serial No. 919(New 1973) Center Distance: 97.5" Spindle Speeds: 25-1800 RPM. Spindle Bore Dia: 2" MT In Spindle: no.6. No. Long. Feeds: 42. No. Cross Feeds: 42. No. Metric Threads: 38- 0.4-28mm. No. English Threads: 35- 28-1 TPI. Features/Accessories 15" 3 J Chuck. 16" 4 J Chuck, 2) Steady Rests, Change Gears, 2) Chip Pans. Motor HP 6.74 KW. FOB Point Elk River. MN. Price $13.500.
JET 1440-3 PGH Gap Hole Engine Lathe 60Hz 220/440 Volts 1500 r/min
ACT\Coleman Machinery Presents: USED: JET 1440-3 PGH Gap Hole Engine Lathe 60Hz 220/440 Volts Speed: 1500 r/min Location: Paramount CA. 90723 JET 1440-3 PGH Gap Hole Engine Lathe 60Hz 220/440 Volts Speed: 1500 r/min Shipping Information. Ships to: Worldwide Shipping Weight: Approx 650 lbs. Location: Paramount. CA 90723, United States Product is sold as is and no warranty is implied; UNLESS EXPLICITLY EXPRESSED BY ACT/COLEMAN MACHINERY Contact seller for details and payment instructions at(562) 602-1207. Ask for Ramiro. ACT Coleman Inc. 16200 South Garfield Avenue. Paramount Ca. 90723 lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-14305cc26af-0xf4-
LeBlond Regal Engine Lathe, 19" x 54" Centers with Tapper Attachment & 2 chucks
Link to Video of Machine Running LeBlond Regal Toolroom Engine Lathe. 19" x 54" Lathe with 7.5 HP and Taper Attachment. Steady Rest, Coolant Tank& Motor Specification Description Swing Over Bed, 19.25" Swing Over Cross Slide, 12.25" Center Distance, 54" Spindle Speeds, 12, Spindle Range, 40- 1.800 RPM, Spindle Hole, 1.75" Spindle Nose, L-1, Feeds(48) 2- 112 T.P.I. Motor, 7.5 HP, Weight. Approx, 4.500 Lbs. Approx. Dimensions, 110" x 50" x 65" H, Equipped With: 12" 4-Jaw Chuck. Carriage Stop, Hardened Bedways, Threading Dial, Taper Attachment, Geared Head NOTE: All specifications are approximate. And are not binding in any way. We endeavor to make information as complete and accurate as possible. If you notice a discrepancy, please let one of our sales people know so that the error can be ... morecorrected. Warranty USED EQUIPMENT: 30 day return privilege per MDNA. We suggest you Inspect All Used Machinery Prior to Purchase. This machine needs to be shipped via a flat-bed. If you wish to try to ship a different way. Please contact us to discuss before making arrangements. Dimensions and Weight should be above. Contact Erik@ 847-338-7139 if you have any questions on the machine. NOTE: This machine can be picked up in Elk Grove Village. IL( near O'Hare)
Cadillac Engine Lathe - #945043
Please Refer To Machine# 945043 Cadillac Engine Lathe 1733 L3000 Lathes- Engine Chuck Size Chuck Mounting Plate. Max Swing Over Bed 17" Swing Over Cross Slide 33" Max Center Distance Manufacturer Cadillac. Model No. 1733. Serial No. Year Mfg. Spindle Speeds Hole Through Spindle Spindle Nose Tailstock Taper No Tailstock. Features/Accessories Motor HP Condition Comments 3' x 8' x 4'H. FOB Point Elk River. MN. Price $1.900.
Mudanjiang Model LG-2060DS, 20"/30" X 60" Gap Bed, Geared Head Engine Lathe
Sorry the photos aren't great. This is a Beautiful. Well Equipped Engine Lathe Rapid Traverse on"X" Y" Axes. Usually only seen on Larger Lathes. Now available for your inspection under power and purchase at our Warehouse in Beautiful Downtown Miamisburg. Ohio is this"ABSOLUTELY EXCELLENT" Mudenjiang Model LG-2060DS 20" 30" swing X 60" cc Geared Head Engine Lathe. W/ SWI Trac 102 Digital Readout(DRO) and Inch and Metric Threading. We have run this machine through all speeds and feeds and find it to be in Excellent Operating Condition. Further. It is equipped with a 3 9/16" Spindle Hole, Inch and Metric Threading, Removable Gap, Steady Rest, Follow Rest, 4 Jaw, 3 Jaw, and Digital Readout(DRO) These Mudenjiang Engine Lathes are Excellent Engine Lathes Built With a Whole Lot of Quality in Mudenjiang. ... moreChina. Specifications are as follows: MUDENJIANG GAP BED ENGINE LATHE MODEL: LG-2060DS SERIAL NUMBER: 96-6-64 GENERAL SPECIFICATIONS Swing Over Bed: 20 1/4" Swing Over Cross Slide: 12-5/16" Swing In Gap: 30" Distance Between Centers: 60" Spindle Bore: 3 9/16" Spindle Nose: D1-8" Spindle Speeds: 24) 14 to 1800 RPM Tailstock Taper: No. 6 M.T. Tailstock Quill Travel: 7" EQUIPPED WITH 10 HP Motor(230V/3PH/60CYC) Digital Readout(SWI Trac 102) Hardened Bed Ways 12" 3-Jaw Chuck(no jaws) 16" 4-Jaw Chuck Dog Plate 8" Steady Rest Follow Rest Carriage Micrometer Stop Heavy Duty. Aloris Tool Post(no holders) Removable Gap Thread Dial Splash Guard. Chip Pan, Coolant System Foot Lathe Shutoff and Brake Rapid Traverse on both"X" Y" Axes Approximate Weight: 6.000 Lbs. F.O.B. Miamisburg. Ohio 45342 ALL SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER Note: There is absolutely no scoring on the ways of this lathe. You can see this fine machine tool under power at our Warehouse in Beautiful Downtown Miamisburg. Ohio by calling Andy or myself for inspection(see phone numbers below) This is a Mudanjiang Model LG-2060DS Gap Bed
Engine Lathe Jessey Studturn 14" X 40" Gap Bed Vari SpeedToolroom Lathe (1998)
You are bidding on our 14" X 40" Jessey Studturn SV-1440VS Geared Head Gap Bed Toolroom Lathe(1998) From a Miami Aerospace facility Call or email us with any questions or to receive our video. 773-866-9600 Mark. Gregg, Scott, Steven or Manny or simply email: sales@assetexchangeinc.com 14" X 40" Jessey Studturn SV-1440VS Geared Head Gap Bed Toolroom Lathe(1998) 14" x 40" Capacity. Gap Bed, Geared Head, Inch/ Metric Threading Specifications(Preliminary) Swing Over Bed: 14" Swing Over Cross Silde: 10.75" Swing in Removable Gap: 20" Center Distance: 40" Spindle Speeds: 35-2500 RPM, Spindle Bore: 1.625" Threads: 0.4- 7 MM, Threads: 4- 72 TPI, Main spindle speed: 4 HP, Equipped With: 3 Jaw Chuck. Quick Change Tool Post, Tailstock, Dial Thread Chasing Attachment, Live Center, Foot Brake, Chip ... morePan, Splash Guard, coolant Pump and Piping, Work Light, Digital Tachometer, Inch Metric Threading, Contact Us Contact Us at 773-866-9600 or sales@assetexchangeinc.com to receive more information,
ENGINE LATHE MAKE- HARRISON MODEL-M250 12" X 30"
ENGINE LATHE MAKE- HARRISON MODEL-M250 12" X 30" PLEASE BE ADVICE THAT THIS IS A USED MACHINE AND NOT A NEW ONE. IT HAS SOME NORMAL WARE AND USED. IF YOU WOULD LIKE TO INSPECT THE MACHINE BEFORE BIDDING OR YOUR BIDDING IS CONTINGENT UPON INSPECTING IT. PLEASE DO SO BEFORE THE END OF THE AUCTION OR PLACING A BID. WE ENCOURAGE BIDDER TO INSPECT THE EQUIPMENT. MACHINE IS SOLD AS IS WHERE IT IS WITH NO WARRANTIES OF ANY KIND SINCE IS A USED MACHINE. THE MACHINE IS USED AND HAS BEEN LISTED AT A GREAT PRICE FOR FAST SALE. THIS IS NOT A RESERVED AUCTION. Note: PAYMENT MUST BE MADE WITHNG 48 HOURS AFTER BIDDING ENDS. PLEASE CONTACT US BEFORE MAKING ANY PAYMENT. IF YOU ARE A FLORIDA STATE BUYER DON'T FORGET TO ADD 7% SALES TAXES TO YOUR TOTAL ITEM PRICE. THANK YOU. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-143087d07e1-0xfc-
BAOJI ENGINE LATHE WITH TAPPER S/N 2332 16"X40"
BAOJI ENGINE LATHE WITH TAPPER S/N 2332 16"X40" PLEASE BE ADVICE THAT THIS IS A USED MACHINE AND NOT A NEW ONE. IT HAS SOME NORMAL WARE AND USED. IF YOU WOULD LIKE TO INSPECT THE MACHINE BEFORE BIDDING OR YOUR BIDDING IS CONTINGENT UPON INSPECTING IT. PLEASE DO SO BEFORE THE END OF THE AUCTION OR PLACING A BID. WE ENCOURAGE BIDDER TO INSPECT THE EQUIPMENT. MACHINE IS SOLD AS IS WHERE IT IS WITH NO WARRANTIES OF ANY KIND SINCE IS A USED MACHINE. THE MACHINE IS USED AND HAS BEEN LISTED AT A GREAT PRICE FOR FAST SALE. THIS IS NOT A RESERVED AUCTION. Note: PAYMENT MUST BE MADE WITHNG 48 HOURS AFTER BIDDING ENDS. PLEASE CONTACT US BEFORE MAKING ANY PAYMENT. IF YOU ARE A FLORIDA STATE BUYER DON'T FORGET TO ADD 7% SALES TAXES TO YOUR TOTAL ITEM PRICE. THANK YOU. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-143087d07b2-0xfa-
SATESA, 24" X 80" SPAIN MANUFACTURED ENGINE LATHE CINCINNATI
ENGINE LATHE. SATESA. 24" X 80" SPAIN MANUFACTURED. MACHINE IS IN GREAT WORKING CONDITION. MACHINE IS LOCATED IN MIAMI. WE CAN LOAD IT TO YOUR TRUCK FOR NO EXTRA COST(OPEN TRUCK ONLY) PLEASE BE ADVICE THAT THIS IS A USED MACHINE AND NOT A NEW ONE. IT HAS SOME NORMAL WARE AND USED. IF YOU WOULD LIKE TO INSPECT THE MACHINE BEFORE BIDDING OR YOUR BIDDING IS CONTINGENT UPON INSPECTING IT. PLEASE DO SO BEFORE THE END OF THE AUCTION OR PLACING A BID. WE ENCOURAGE BIDDER TO INSPECT THE EQUIPMENT. MACHINE IS SOLD AS IS WHERE IT IS WITH NO WARRANTIES OF ANY KIND SINCE IS A USED MACHINE. THE MACHINE IS USED AND HAS BEEN LISTED AT A GREAT PRICE FOR FAST SALE. THIS IS NOT A RESERVED AUCTION. Note: PAYMENT MUST BE MADE WITHNG 48 HOURS AFTER BIDDING ENDS. PLEASE CONTACT US BEFORE MAKING ANY PAYMENT. IF YOU ARE A FLORIDA STATE BUYER DON'T ... moreFORGET TO ADD 7% SALES TAXES TO YOUR TOTAL ITEM PRICE. THANK YOU.
Jet 1236PY Engine Lathe
Jet 1236PY Engine Lathe. 12"x36" 3 jaw chuck. Everything included is in the picture.
Hendey 14"X30" Geared Head Engine Lathe 3 jaw Chuck collet closer taper gunsmith
Used Hendey swing 14"X30" geared head metal lathe model 12X30 with L1 spindle taper. This lathe has spindle speeds 19-598 rpm and threading 1.5-80tpi. Includes full chip pan. A 10" 3 jaw chuck rev jaws, taper attachment, collet closer with 15ea collets and wood case, spindle nose protector, and headstock center. It has less than 1/4 turn backlash in the crossfeed and 1/8 in the compound. It is powered by about a 5HP 3 phase motor and is currently wired for 240 volt 3Ph. The ways have some wear but cannot feel any ridges with my fingernail. It has some dinges and scratches. The bore is 1 1/2" It runs fine, all functions work as they should. This lathe weighs about 2500 lbs. Call 314-750-1403 or email with questions. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. Missouri, ... moreforklift loading is free. Email me for a shipping quote. Please check out my other auctions. Thanks for looking. This machine is for sale locally. So the auction may be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction to avoid neg feedback. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified. So please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days. buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner. Posted with
MONARCH 39.5" X 72"cc HEAVY DUTY ENGINE LATHE
USED MONARCH 39.5" X 72"cc HEAVY DUTY ENGINE LATHE MAX. SWING: 39.5" SWING OVER CROSS SLIDE: 25" CENTER DISTANCE: 72" SPINDLE SPEEDS: 6- 303 RPM MAIN MOTOR: 30-HP HARDEND BEDWAYS 32" 4-JAW INDEPENDENT CHUCK w/JAWS 4-WAY TOOL POST TAPER TURNING ATTACHMENT STEADY REST THREADING CHIP/COOLANT PAN MISC. TOOLING FOR MORE INFORMATION CONTACT GARY@949-246-2978 or email:
Engine Lathe 20" x 132" Standard Lodge & Shipley
20" x 132" STANDARD LODGE& SHIPLEY 1 3/4" HOLE THRU SPINDLE 18" 4 JAW STEEL CHUCK TAPER ATTACHMENT QUICK CHANGE TOOL POST 1740 RPM 440 VOLT RUNS GREAT WE WILL LOAD YOUR TRUCK FOR FREE! ANY QUESTIONS CALL GREG 330-472-9383
WASINO LEO-125A ENGINE LATHE (USED) 19" X 50"
WASINO LEO-125A ENGINE LATHE(USED)19" X 50" D1-6" CAMLOCK NOSE. 19 TO 1500 RPM. SPINDLE BORE 2 1/8 IN. NO INTERNATIONAL SALE. PAY BY PAYPAL ONLY WITH IN 72 HOURS OF SALE. WE WILL PACKAGE AND SHIP WITH IN THREE WORKING DAYS AFTER PAYMENT. CONTACT SELLER FOR SHIPPING INSTRUCTIONS. WITH 12" 4 JAW CHUCK. QUICK CHANGE TOOL POST WITH HOLDERS, TRAV-A-DIAL. WE CAN LOAD FOR FREE.
TOS Engine Lathe with "RAM TEK" D.R.O. "VIDEO"
TOS Engine Lathe Made in Czechoslovakia Ram Tek 2000 D.R.O. Made in the U.S.A. Click" below to video of D.R.O. in action; 10" 3-Jaw Chuck 16" Swing 7' Bed Trencin Lathe S# 40B No. 0401574432 Questions: Please contact Robby@ 714-892-9800
southbend nordic 15 engine lathe
machine runs exc.Ways are great. couple cracked plastic nobs on gear change lever, nothing big. the lathe is a 15" swing the bed is 6' long. i also have the slash guard for the back,it's just not on the lathe. buyer responsible for trucking. i can load on truck.
Clausing colchester 21x80 engine lathe w aloris
Clausing Colchester 21" lathe in very good condition. Used in a low volume one man repair shop. Ways are very clean, with no noticeable wear, and two very small nicks as shown in picture. Comes with tooling shown, and a three jaw and four jaw pratt burnerd chucks. Full bed length measures around 89" Please ask any detailed questions. Buyer responsible for shipping, i will strap to pallet and load on truck at no additional charge. I will also deliver for free within 20 miles and I may also be able to deliver further at additional charge.
26x144 Cincinnati Hydra-Shift Engine Lathe
Very nice Cincinnati Lathe in perfect mechanical condition and not bad cosmetically. It has just been serviced and is ready to make chips. We will deliver this machine to the Midwest region for free. For other regions there may be an additional charge. This machine comes with a 30 day warranty on all mechanical assemblies. Electrical components are not under warranty. Lathe has a 2.375 inch spindle bore. visit us at jchandlermachine.com Or call us direct 618 616 6736 Ask for Jon. Lathe comes with 3 and 4 jaw chucks. Steady rest, tail stock tooling, and tool post set. mill lathe machine vertical knee 48 42 9 Gap bed engine Leblond hydra shift Hydrashift Posted with
American Pacemaker Type C 16" X 54" Heavy Duty Engine Lathe
AMERICAN PACEMAKER TYPE C 16" X 54" HEAVY DUTY ENGINE LATHE MAXIMUM SWING 21 1/2" MAXIMUM LENGTH 64" Serial Number 75602 24 Spindle Speeds- 23 to 1500 RPM\ Harden and Grown Bed Ways showing no noticeable wear Taper Attachment Full Length Coolant Pan 3 Jaw Chuck 13 Inches with Top Jaws Inch Feeds and Threading 2 Inch Hole through Headstock Thread Dial 10 HP 220/440 Three Phase Motor and Controls and Disconnect Machine Size 130" Long 68" Wide 55" Tall Approximately 8.000 Lbs. Came right from service and will go right back to service for you. Many companies make parts for this lathe and service it. Bourne and Koch in Rockford. Illinois, has all the prints. If they do not stock it they can make you the part. Also, you could try American Tool Works.com/atwhtml. They make parts. Notice the photo of the gear train. ... moreAll of the feed gears are totally enclosed and running in oil. This design was thirty years ahead of every other lathe manufacturers. We are going to start the bidding on this American Pacemaker Lathe at $1.600. USD without reserve. We will send the buyer an email with payment instructions. Payment to be in the form of a cashier's check or wire transfer. If Paypal is used please add 3% Three per cent) for processing. Buyer to pay freight. Ask one of your local trucking companies for an LTL rate(Less than truckload) The machine is located in the 48212 Zip Code in Detroit, MI. Our rigging and loading for this machine is FREE. Should you have any questions please contact Harry Sorensen at 248 892-5233 weekdays between 7 a.m. and 4 p.m. EST. Time is money payment must be made within5(Five) business days of award and shipment within(Seven) days.
13" x 5 ft. bed South Bend Engine Lathe Cat CL145B 6958tkl13
USED SOUTH BEND LATHE. MOTOR REWOUND FOR 480 VOLTS THREE PHASE. MOTOR CAN BE RECONNECTED T0 230 VOLTS, BY DISMANTLING THE MOTOR AND RECONNECTING THE WINDING. CAT NUMBER CL145B, 5FT. BED 6958TKL13. 13" SWING. 30" BETWEEN CENTERS. COMES WITH TWO CHUCKS, FACE PLATE, TOOL HOLDER, CENTER, CHUCK KEYS, MISC. TOOLING. PICK UP ONLY, WILL LOAD WITH FORK LIFT. LATHE IS SET UP FOR REVERSING. OR BUYER TO MAKE ARRANGEMENT FOR SHIPPING, WILL CHARGE TO PALLETIZE FOR SHIPPING.
LARGE CAPACITY IKEGAI ENGINE LATHE 24 X 120
NICE HEAVY DUTY LATHE. 24 X 120, THREADING, 4-JAW CHUCK, STEADY REST. WE WILL LOAD. CAN ASSIST IN FINDING COMPETITIVE CARRIER/TRUCKING RATES. EMAIL ANY QUESTIONS.
Enco 110-2072 Engine Lathe 1989 20343
in titles& description Name: Enco 110-2072 Engine Lathe 1989, Ticket# 20343, Model: 110-2072, Manufacturer: Enco, Item located at: Morrisville. PA, Serial# 891149. 886525, Year: 1989, Condition: Used, Terms& Condition: As is where is, Selling Price: $1950.00 Description: Enco 110-2072 Engine Lathe Model: 258-9040 Model: 110-2072 Serial# 891149. 886525 12"x32" 8" across slide Speed: 70-1220 Thru: 1-5/8 inches Date: Sept. 1989 1-1/2 HP 4 Poles 1720 RPM 110/220 V 1Phase cycles: 60 Distance from chuck center to tail stock: 33 inches Distance Chuck center to Table: 6-1/2 inches Chuck thickness: 6-1/2 Inches Spindle(without chuck) to end of table: 4 feet. Tooling in photos is included. Ticket: 20343 | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. ... moreA&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
2007 ROMI M20 M-20 M 20 CNC LATHE TOOLROOM FLATBED ENGINE FANUC 12" CHUCK
2007 Romi M20 CNC Lathe 20" Swing x 60" Between Centers Fanuc 21iT Control Our Stock Number 1370-021214 Machine Description ROMI M 20. FANUC 21iT, 20" SW, 60" CC, 12" CHUCK, TAIL Serial# 022-092862-404 Year: 2007 Specifications: are accurate to the best of our knowledge) SWING OVER BED 20.47" SWING OVER CARRIAGE WINGS 17.72" SWING OVER CROSS SLIDE 10.24" CENTER DISTANCE 60" X AXIS TRAVEL 11.02" Z AXIS TRAVEL 60" SPINDLE SPEED 3- 3.000 RPM SPINDLE NOSE A2-6 HOLE THRU SPINDLE 2.56" SPINDLE MOTOR 15 HP TAILSTOCK QUILL TRAVEL 5.11" TAILSTOCK QUILL DIAMETER 3.15" TAILSTOCK TAPER HOLE MT#4 APPROX. DIMENSIONS 144" x 65" x 65" APPROX. WEIGHT 8.000 LBS Equipped With: FANUC 21iT CNC CONTROL WITH 10.4" LCD SCREEN RS-232C PORT INTERFACE FOR DNC OPERATION MANUAL. ... moreTEACH& RUN MODES, DUAL HANDWHEELS TOOL POST 12" MANUAL 3-JAW CHUCK FULLY ENCLOSED SPLASH& SAFETY GUARDING MANUAL TAILSTOCK. REMOVABLE CHIP PAN, CONSTANT SURFACE SPEED ALL AVAILABLE MANUALS, This machine is in very good working order. You may inspect under power. Any questions please call at 616-455-3800 SPECIFICATIONS ARE ACCURATE TO THE BEST OF OUR KNOWLEDGE. Shipping and Handling All orders are shipped via United Parcel Service(UPS) Ground to locations within the 48 continental United States if size and weight allow otherwise will be shipped best way. Shipping charges for orders shipped outside the 48 continental United States may be considerably higher. Most orders will be shipped within 2 to 5 business days after payment has been confirmed(weekends excluded) All orders are processed during business hours. Monday thru Friday from 8:00am to 5:00pm PST. Shipping cost is fixed. Please bid accordingly. No discounts will be given. Multiple auctions will not be shipped together. Payment We prefer wire transfer. Visa& MasterCard accepted thru PayPal only. Personal checks accepted. Allow 10 business days to clear this payment. No exceptions. Charney Machine& Tool
42" x 240" Niles Heavy Duty Engine Lathe
This Lathe is in plant/ Under Power! Email us for more pics/ info! OR. You are bidding on a 42" x 240" Niles Heavy Duty Engine Lathe! Good condition. Removed from service! Email for more information or video! Please check out our Feedback. We are straight shooters! NOTE* Top Bidder to pay actual rigging/ loading charges. OUR RETURN POLICY. Unit is being sold for a customer. Inspection encouraged as there is no 30 day return on this item! Good Luck.
ACRA TURN NAMSEON ENGINE LATHE 16" x 40" Very Hgh Quality from South Korea
Bought new in 2001. This was the only manual lathe in a CNC machine shop. It was used exclusively for rare onesy-twosy runs, but mostly for occasional fixture machine. This is a great lathe with very little usage. It is a license-built South Korean copy of a high-end Japanese engine lathe, so it is way better quality than anything coming out of China or Taiwan even today. It is much heavier than lesser lathes, and has a one-piece cast base for the ultimate rigidity. It is equipped with: Longitudinal Feed Hand Wheel And Tailstock Hand Wheel Have Graduated Collar Dials EZ Camlock Saddle Binder Cross Slide Binder Compound Binder Heavy Duty Electric System With Low Voltage Controls D1-6 Cam Lock Spindle With 2.0" Bore(Machined From A Solid Drop Forging) Inch To Metric Threading With The Turn Of A Knob Separate Leadscrew And Feed Rod Large ... moreDirect Reading Dials On Cross And Compound Slides Spindle Jog Button Foot Brake Which Provides Instant Stop Feed Overload Safety Clutch Built Into Apron Automatic Longitudinal Feed Stop Full Length Rear Chip And Splash Guard. Steady Rest Gap Bed 15.5" Swing over Bed. 9.375" Swing over cross slide. 24" Swing in gap 40" Distance between centers. 11.80" Bed width. D1-6 Spindle nose. 2" Spindle bore. 23-1800 RPM Spindle speeds. 7.875" Cross slide travel. 5.20" Compound Travel. 32 Inch threads available. From 4 to 56 TPI. 21 metric threads available. From.5mm to 7mm pitch. Longitudinal feed rates from 0.0015IPR to 0.0236 IPR. Cross feed from 0.0005 IPR to 0.0077 IPR. 2.20" Quill diameter. 5.20" Quill travel. MT4 Quill Taper. 8" Three jaw manual chuck included. 7.5HP Spindle motor. 220 VAC/3Ph/60. Weight: Net at 3.850 lbs- See what that cheapo Chinese lathe weighs! Please note that a $500.00 deposit through PayPal is required within twenty four hours of the auction's close. The balance may be paid in person. Or prior to pick up by a bank-to-bank wire transfer. Photos of dead inventors are also accepted only if done in person.
ENGINE LATHE AMERICAN PACEMAKER- 41'' SWING OVER BED 21" SWING OVER CROSS SLIDE
ENGINE LATHE AMERICAN PACEMAKER 41' SWING OVER BED 21" SWING OVER CROSS SLIDE 72" BETWEEN CENTER 6-600 RPM SPINDLE SPEEDS 2-7/8" HOLE THROUGH SPINDLE 16" CROSS SLIDE TRAVEL 16" TAILSTOCK TRAVEL 4 JAW CHUCK 96" WIDE X 194" LONG X 64" TALL 26.000LBS 460v 3 PHASE POWER IT HAS MANUAL INSTRUCTIONS MACHINE IS IN GOOD WORKING CONDITIONS. LOCATED IN MIAMI FL. PLEASE BE ADVICE THAT THIS IS A USED MACHINE AND NOT A NEW ONE. IT HAS SOME NORMAL WARE AND USED. IF YOU WOULD LIKE TO INSPECT THE MACHINE BEFORE BIDDING OR YOUR BIDDING IS CONTINGENT UPON INSPECTING IT. PLEASE DO SO BEFORE THE END OF THE AUCTION OR PLACING A BID. WE ENCOURAGE BIDDER TO INSPECT THE EQUIPMENT. MACHINE IS SOLD AS IS WHERE IT IS WITH NO WARRANTIES OF ANY KIND SINCE IS A USED MACHINE. THE MACHINE IS USED AND HAS BEEN LISTED AT A GREAT ... morePRICE FOR FAST SALE. THIS IS NOT A RESERVED AUCTION. Note: PAYMENT MUST BE MADE WITHNG 48 HOURS AFTER BIDDING ENDS. PLEASE CONTACT US BEFORE MAKING ANY PAYMENT. IF YOU ARE A FLORIDA STATE BUYER DON'T FORGET TO ADD 7% SALES TAXES TO YOUR TOTAL ITEM PRICE. THANK YOU.
13" x 40" South Bend, Model 1340 Engine Lathe S/N 164794
INDUSTRIAL ASSETS MACHINERY IS PLEASED TO OFFER FOR YOUR CONSIDERATION: REFERENCE# 5628 Southbend Engine Lathe MODEL: 1340 S/N: 164794 Specifications: Swing Over Bed 13" Swing Iver Cross Slide 7 1/4" Distance Between Centers 40" Spindle Speeds(4) 239- 373- 567- 875 RPM Spindle Nose 1 3/4" 8" Hole Thru Spindle 1" Threads: Inch(48) 2- 224 TPI Feeds(21) 0.0015" 0.0841" Cross Slide Travel 10" Tailstock Quill Taper#3 Tailstock Quill Travel 4 1/4" Dimensions(LxWxH) 80" x 28" x 47" Weight 2.200 Lbs. Equipped With: 3- Jaw Chuck 4- Jaw Chuck Steady Rest Tool Post Drill Chuck Horsepower: 1 Location: Huntington Park. CA BUYER IS RESPONSIBLE FOR RIGGING/SHIPPING. Quotes may be provided upon request. Item is sold"as is. Where is" and inspection is encouraged. Please call 323-587-1887 ... morefor an inspection appointment or questions Industrial Assets Machinery 2301 Belgrave Ave Huntington Park Ca. 90255 323-587-1887 IA MACHINERY DISCLAIMER. TERMS& CONDITIONS 1. Payment Terms: Terms of payment. Unless otherwise specified, are: for machinery and tooling sold without refurbishing. Net cash upon receipt of invoice; for machinery and tooling sold with refurbishing. One-third down upon receipt of invoice, balance upon notice of completion of refurbishing work. All payments are to be made in US$. A late penalty shall be charged on all amounts over 30 days past due computed on an interest rate equal to 18% per annum. Buyer shall also be liable for any and all costs and expenses incurred by IA MACHINERY arising out of or in connection with efforts by IA MACHINERY to collect any unpaid amounts hereunder including. Without limitation, attorney or collection agency fees and expenses. No forbearance, indulgence, or delay by IA MACHINERY in taking any action hereunder shall be deemed a waiver of any rights of IA MACHINERY under this Agreement. Title to this machinery and/ or tooling remains vested with IA MACHINERY and will only pass to Buyer upon payment of all amount
ENGINE LATHE MAKE- HARRISON MODEL-M250 12" X 30" DRO
ENGINE LATHE MAKE- HARRISON MODEL-M250 COLANT SYSTEM MACHINE TREAD MM AND INCHES MACHINE IS IN GREAT WORKING CONDITION DIGITAL READ OUT size: 12" X 30" PLEASE BE ADVICE THAT THIS IS A USED MACHINE AND NOT A NEW ONE. IT HAS SOME NORMAL WARE AND USED. IF YOU WOULD LIKE TO INSPECT THE MACHINE BEFORE BIDDING OR YOUR BIDDING IS CONTINGENT UPON INSPECTING IT. PLEASE DO SO BEFORE THE END OF THE AUCTION OR PLACING A BID. WE ENCOURAGE BIDDER TO INSPECT THE EQUIPMENT. MACHINE IS SOLD AS IS WHERE IT IS WITH NO WARRANTIES OF ANY KIND SINCE IS A USED MACHINE. THE MACHINE IS USED AND HAS BEEN LISTED AT A GREAT PRICE FOR FAST SALE. THIS IS NOT A RESERVED AUCTION. Note: PAYMENT MUST BE MADE WITHNG 48 HOURS AFTER BIDDING ENDS. PLEASE CONTACT US BEFORE MAKING ANY PAYMENT. IF YOU ARE A FLORIDA STATE BUYER DON'T FORGET TO ADD 7% SALES TAXES TO ... moreYOUR TOTAL ITEM PRICE. THANK YOU.
JFMT-J.CW6280 ENGINE LATHE
31.5" x 120" Tru-Turn Gap Bed Engine Lathe Model# CW6280 New in: 1995 Specifications: Equipped With: Removable Gap Bed- Hardened Bed Ways- Inch/Metric Threading- Thread Dial- Taper Turning Attachment- 20" 4-Jaw Chuck with 6" Hole 4-Way Rapid Traverse- T-Slotted Compound- Coolant System- Operators Manual Maximum Swing Over: Bed 31.5" Maximum Swing Over: Carriage 20.5" Maximum Swing In: Gap 39.5" Length of Gap 12.6" Width of Bed 21.65" Spindle Nose D1-11" Camlock Spindle Bore 4-1/8" Motor 20 HP 3/60/220 Volt Travel of Cross Slide 18" Travel of Top Slide 8.5" Spindle Speeds(18) 10- 1.000 RPM Longitudinal Feeds(64) 0.0039- 0.957 IPR Cross Feeds(64) 0.00197- 0.478 IPR Rapid Traverse Rate 150 IPM Thread Range 1- 14 TPI- Inch 1- 240mm- Metric 0.05- 120mm- Module 1- 28 Diametral Tailstock ... moreQuill Travel 12" Approximate Floor Space 200"L x 58"W x 63" H Approximate Weight: 11.000 LBS MACHINE IS IN GOOD WORKING CONDITIONS. LOCATED IN MIAMI FL. PLEASE BE ADVICE THAT THIS IS A USED MACHINE AND NOT A NEW ONE. IT HAS SOME NORMAL WARE AND USED. IF YOU WOULD LIKE TO INSPECT THE MACHINE BEFORE BIDDING OR YOUR BIDDING IS CONTINGENT UPON INSPECTING IT. PLEASE DO SO BEFORE THE END OF THE AUCTION OR PLACING A BID. WE ENCOURAGE BIDDER TO INSPECT THE EQUIPMENT. MACHINE IS SOLD AS IS WHERE IT IS WITH NO WARRANTIES OF ANY KIND SINCE IS A USED MACHINE. THE MACHINE IS USED AND HAS BEEN LISTED AT A GREAT PRICE FOR FAST SALE. THIS IS NOT A RESERVED AUCTION. Note: PAYMENT MUST BE MADE WITHNG 48 HOURS AFTER BIDDING ENDS. PLEASE CONTACT US BEFORE MAKING ANY PAYMENT. IF YOU ARE A FLORIDA STATE BUYER DON'T FORGET TO ADD 7% SALES TAXES TO YOUR TOTAL ITEM PRICE. THANK YOU.
Clausing Colchester 8100 Engine Lathe Turning Steady Rest 4 Jaw Chuck Tailstock
Clausing Colchester 8100 Engine Lathe Machine is in excellent condition and can be seen under power as needed Specifications: Model.8100 Swing Over Bed.21" Swing Over Cross Slide.14.5" Distance Between Centers.84" Spindle Speeds.16) 20-1.600 RPM Spindle Nose.D1-8 Hole Thru Spindle.3.5" Threads.Inch/Metric Inch.38) 2-72 TPI Metric.45) 0.4-14mm Feeds.45) 0.002"0.016" Cross Slide Travel.12" Tailstock Quill Taper.5 MT Tailstock Quill Travel.7" Dimensions.138"L x 42"W x 52"H Approximate Weight.9.000 LBS. Equipped With: 3-Jaw Chuck 4-Jaw Chuck Steady Rest 7" Coolant System Horsepower 121/2 All Available Manuals Please contact Jason Stob 708 790-3358 with any question
Tongil Engine Lathe TIPL-4 16" x 40"
Tongil TIPL-4 engine lathe Model year 1982. Serial#005-4287 Swing over bed- 15.75" Swing over cross slide- 8.25" Swing in removable gap- 20" Length of gap from spindle nose- 6" Spindle bore- 2.25" Spindle nose- D1-6 cam lock Number of spindle speeds- 8 Range of spindle speeds- 60 to 1500 RPM Range of longitudinal feeds- 0013 TO 0.029 IPR Range of cross feeds- 0006 to.013 IPR. Rang e of inch threads- 4 to 56 TPI Range of metric threads- 5 to 7mm Tailstock spindle taper- No. 4 MT Tailstock spindle travel- 6" Main drive motor- 5 HP. 220V- 3 Ph- 60 AC. Floor space- 84" L x 36" D x 48" H Approximate machine weight- 3.500 lbs. Includes 6 jaw Buck chuck. Taper attachment, quick change tool holder, foot brake. Chip pan, coolant pump We will load on to a flat bed truck or trailer.
american pacemaker percision engine lathe 16"/20"x78" style c 220/440 v 3 phase
actual swing 21.75" swing over cross slide 14" hole through 2" d-1-6" camlock spindle nose 27 speeds 23-1500 RPM 66 thread ranges 2-120 TPI 66 feed changes.0015-0913 IPR no4 morse taper hardened and ground bedways 16"20"x78" style c 220/440 v 3 phase 11.000 lbs 5'x14'x4' floor space. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-144b97c9bca-0x106-
2006 summit 16-3x40" Gap Percision Manual Engine Lathe
This lathe is in good working order. we got it new in 2006. It was replaced with updated equipment. There is some tooling included. call 3307582766 with questions.or 330-831-7845 The Summit 16-3x40 is the heavy weight leader in the 16” range. It features a 10 HP main motor. 15 ¾” bed width, a single handle“joy stick” control with four way rapid traverse, a 3.1” spindle bore and a machine weight near 6000 lbs. These excellent features combine to provide you the rigidity needed to make the heaviest cuts and give you the finest finishes. 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-144ba41ce9b-0xf4-
41"/52" x 240" (20') HERCULES GAP-TYPE ENGINE LATHE W/TAPER ATTACHMENT - #26800
Quote#26800 41"52" x 240" 20' HERCULES GAP-TYPE ENGINE LATHE New 1965. Serial No 65116, EQUIPPED WITH: Trionics"Pro-Max" Digital Readouts Taper Attachment Threading(Inch-Metric Full-Length Lead Screw) 39" 4-Jaw Chuck w/Jaws- 4-Way Tool Post(2) 27 1/2" Steady Rests- 1) Follow Rest Hardened& Ground Bedways- ASA B-11 Spindle Nose Power Rapid Traverse To Carriage CATALOGUE SPECIFICATIONS: Hole Thru Spindle. 6.19" Swing Over Bed Ways. Rated. 40" Swing Over Bed Ways. Actual. 41" Swing thru Gap. 52" Swing Over Cross-Slide. 28.25" Distance Between Centers. 240" 20' Tailstock. Spindle Taper. 6 MT Tailstock. Quill Diameter. 6.5" Spindle Speeds. Range. 6 to 800 RPM Carriage Longitudinal Feeds. 001 to.200 IPR(99) Thread Changes. American. 1/2 to 84 TPI(63) Thread Changes. ... moreMetric. 5 to 56 PRICE: F.O.B. OUR WAREHOUSE. $69.500.00 Machine/Equipment Subject to Prior Sale.
Emco Maier Compact 10 Engine Lathe: Made in AUSTRIA
Emco Maier Compact 10 Engine Lathe: Made in AUSTRIA MODEL 3001RF This Machine is in Excellence Condition On our Floor Under Power Serial Number B5F 8510009 Technical Data: D1-4 Camlock Spindle Nose Swing over Bed 11" Center Height 5.5" Swing over Cross Slide 6.7" Hole Through Spindle 1.4 Stepped down to 1" Feeds via Lead screw.0035. 007, Per Rev. Distance between Centers 17.7" Head Stock Taper No. 5 Spindle Speeds 6 85/155/300/580/1100/2000 Thread Pitches Via Change Gears Inch: 5- 48- Metric: 5- 45 Tail Stock Taper No. 2 Tail Stock Travel 3.1" Compound Travel 3.9" Cross Slide Travel 5.3" Spindle Motor HP 1- Voltage 110V Single PH. Forward and Reverse. Weight 450Lbs INCLUDES: 5-1/5" 3 Jaw Chuck with Extra Set of Jaws for Larger Work holding 2 Dead Centers 1- MT2 and 1- MT5(for spindle) Thread Dial ... moreindicator Set of 8 Change Gears( as New) Emco Four Position Tool Post Live Center 1/2" Drill Chuck Owners Manual On CD VISIT for more pictures EMAIL QUESTIONS TO OR PHONE 704.855.1970. ONLY CERTIFIED BANK CHECKS ACCEPTED FOR THIS AUCTION. NO CHARGE TO SKID AND LOAD THIS MACHINE IF YOU NEED CRATING THERE WILL BE CHARGE OF $200.00 BUYER TO ARRANGE AND PAY FOR SHIPPING. MACHINE SHIPS FROM ZIP 28023. WE DO NOT SHIP OUTSIDE OF THE USA. THIS MACHINE IS ON OUR FLOOR UNDER POWER AND SUBJECT TO PRIOR SALE. NORTH CAROLINE SALES TAX APPLIES TO IN STATE BUYERS
20/27.5" x 116" VICTOR "GAP-TYPE" ENGINE LATHE - #26405
QUOTE 26405. 20/27.5" x 116" VICTOR"GAP-TYPE" ENGINE LATHE Serial No 714176. Model 20120G, EQUIPPED WITH: 4-Jaw Chuck 3-Jaw Chuck Steady Rest Tool Post Hardened& Ground Bed Ways Inch/Metric Threading CATALOGUE SPECIFICATIONS: Hole Thru Spindle. 2" Swing Over Bed Ways. 19.625" Swing thru Gap. 27.5" Swing Over Cross-Slide. 11.5" Distance Between Centers. 116" Spindle Nose. D1-6 Tailstock. Spindle Taper. 4 MT(16) Spindle Speeds. Range. 30 to 1800 RPM Carriage Longitudinal Feeds. 0034 to.0236 IPR Cross-Slide Cross Feeds. 0016 to.0108 IPR Thread Changes. Range. 4 to 56 TPI Metric Thread Changes. Range. 0.25 to 6 MM Main Motor. Horsepower. 10 HP Floor Space Required. L x D. 13'9" x 2'10" Overall Height. 3'11" Weight. Approximately. 5790 LBS CONDITION: Appears to be in Good ... moreCondition. PRICE: F.O.B. OUR WAREHOUSE. $12.500.00. All Machinery/Equipment Subject to Prior Sale.
AMERICAN PACEMAKER ENGINE LATHE RECENTLY UPDATED
This is an American Pacemaker engine lathe with the following: American Pacemaker Model# C-3 Serial# 75802-58 Asset# AMP-030811-700182 Swing over bed: 36" Distance between centers: 120" Swing over carriage: 22" Can get up to a 24" chuck Hole thru spindle: approx. 2 1/4" Hydraulic tracer attachment Running this machine at 25 HP spindle speeds are 885 RPM Running this machine at 50 HP spindle speeds are 1750 RPM Has tailstock Ways are in good shape All electronics have been recently updated here at Anderson Tooling. Inc. Approximate weight: 30.000 lbs. Location of machine: Fairfield. Iow a Feel free to contact us with any questions. Buyer is responsible for shipping arrangements. We will load for free at our facility. We can assist you with shipping arrangements if needed. CHECK OUT MORE GREAT DEALS IN OUR STORE! For ... morequestions regarding this machine. Or to schedule an inspection, please give us a call at 1-800-535-8331 Buyer acknowledges that whereas most. But not all, machines can be wired to run on different voltages, Anderson Tooling, Inc. cannot be held liable for any damages whatsoever resulting from any power conversion performed by anyone other than a qualified Anderson Tooling, Inc. employee. Buyer also acknowledges that not all components required to perform said power conversion may or may not come with said machine at time of purchase. And additional expense may be required to perform said power conversion at buyer’s expense. Buyer acknowledges that any information provided by ATI regarding Surplus is for general information purposes only and that ATI makes no representation. Guarantee or warranty of any kind or nature, including without limitation, as to quality, kind, class, classification, merchantability, character, quantity, weight, size, dimension, description or fitness or suitability for any use or purpose whatsoever. Buyer acknowledges that ATI EXPRESSLY DISCLAIMS ANY AND ALL GUARANTEES, WARRANTIES AND REPRESENTATIONS OF EVERY KIND AND NATURE, WHETHER EXPRESS OR IMPLIED,
25/34" x 60" NARDINI "SZ2560T" GAP -TYPE ENGINE LATHE - #27133
27133. 25"34" x 60" NARDINI GAP-TYPE ENGINE LATHE New 1996. Serial No DSJFM253, Type SZ2560T, EQUIPPED WITH: Sony Digital Readouts#D1-8 Camlock Spindle Nose- Threading Dial Induction Hardened& Ground Bed Ways Coolant System(Pan& Pump) CATALOGUE SPECIFICATIONS: Hole Thru Spindle. 3.125" Swing Over Bed Ways. Rated. 25" Swing Over Bed Ways. Actual. 25.625" Swing Thru Gap. 33.875" Swing Over Saddle Wings. 24" Swing Over Cross-Slide. 17.875" Distance Between Centers. 60" Cross-Slide Cross-Feed Travel. 14.75" Top-Slide Travel. 6.69" Tailstock. Quill Diameter. 3.125" Tailstock. Quill Travel. 8.06" Tailstock. Quill Taper. 5 MT(18) Spindle Speeds. Range. 19 to 1500 RPM(132) Carriage Long Feeds. 0021 to.0976 IPR(132) Cross-Slide Cross Feeds. 001 to.0505 IPR(54) U.S. Thread ... moreChanges. Range. 2.75 to 42 TPI(54) Metric Thread Changes. Range. 4 to 18.4(54) Modul Threads. Range. 2 to 3.5(54) Diametral Pitch Threads. 3 to 84 Main Motor. Horsepower. 12.5 HP Overall Dimension. L x W. 113" x 54" Overall Height. 61" Weight. Approximately. 8000 LBS PRICE: F.O.B. OHIO(CINCINNATI) $14.950.00. ALL MACHINE/EQUIPMENT ARE SUBJECT TO PRIOR SELL.
Kingston Medium Precision Engine Lathe Model CHD-560x 2300 12" chuck 4" bar Turn
1992 Kingston Medium Precision Lathe. Model CHD-560x2300 Machine is in good running condition and can be seen under power as needed. Please contact Jason Stob 708 790-3358 with any questions. Specifications: Swing: 22” Distance Between Centers: 90” Threading.2-72 TPI Feed.0012"0.038"Rev RPM.11-1000 Motor.10 HP Chuck.12" 3-jaw Thru Hole.4" Machine Weight.5.300lbs Equipped With: Taper Attachment Foot Brake Coolant System Auto Feed Kickout All Available Manuals!FINANCING AVAILABLE! Please contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Please Note! Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the ... morepurpose of obtaining shipping quotes our Zip Code here is 60007. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(520 Machinery Sales LLC and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. 520 MACHINERY SALES LLC COMPANY
Engine Lathe Gap Bed 20" x 100" Hercules Ajax (1980)
20" x 100" Hercules Ajax Gap Bed Engine Lathe(1980) Specifications Swing Over Bed: 20" Swing in Gap: 29" Swing over Cross Slide: 9" Center Distance: 100" Spindle Bore: 3.25" Spindle Speed: 25-1300 RPM, Main Motor Drive: 10 HP, Equipped With: Taper Attachment. 14" 4) Jaw Chuck, 6" 3 Point Roller Bearing Steady Rest, Tool Post, Tailstock, Dial Thread Chasing Attachment, Machine being sold As Is. Where Is. Buyer is responsible for shipping and loading. If you have any questions please contact Scott Tyler at(773) 290-1825 or email at: scottt@assetexchangeinc.com di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-14544914508-0x114-
Stellar BL-1336 Horizontal Toolroom Engine Lathe 13 x 36 w/Washington 6" Grinder
Don't miss out.bidadoo has auctions ending every week in two eBay stores. SKU: UR641500 A: 0015000000LEUmr O: 0065000000QLqTM PA: 0015000000kLkjs View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Stellar BL-1336 Horizontal Toolroom Lathe 13" x 36" W/ Washington 6" Carbide Grinder in good condition. This unit is being dispersed as part of a standard rental fleet rotation package from United Rentals. The largest equipment rental provider in the world. Bid with confidence knowing it has been regularly serviced and maintained. This item is being offered by bidadoo auctions- the largest and most trusted online equipment auction service. We have two great eBay stores to better serve you. View our for construction machinery. Fleet vehicles and heavy equipment. ... moreView our for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Stellar Model: BL-1336 Type: Horizontal Lathe Serial No: C7810-570 Features/Specifications: Swing: 13" Distance Between Centers: 36" approx. Bed Length: 43" Variable Speed: Low: 60-300 RPM High: 240-1240 RPM Tailstock Tool post Inch& MM threads Washington Carbide Grinder Model: CT-301 Size: 6" Output: 1 Hp Electrical: 115V- 60 Hz- 1 PH Dimensions& Weight: L 84" x W 44" x H 67" Shipping Weight: 1.700 lbs Condition: Good- working at time of decommission Normal wear from previous use in working industrial environment See photos for more details Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/testing. In addition, all conditions are cross-referenced with service personnel, operators, and maintenance system records(when available) bidadoo, Inc. makes no guarantees to actual hours, miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights, dimensions, features, specifications and reso
Victor Gap Bed Engine Lathe, 7 x 36
Victor Gap Bed Engine Lathe 36" Between Centers Swing over ways 7" Swing over gap 11" Thru Hole 1-1/4" Metric and Standard Threading 2-station quick change tool holder RPM 1800 max O/A Dims: 89" length x 30" Width x 48" tall Weight 2500- 3000 lbs Tooling: 8" 3-Jaw Chuck 10" 3-Jaw Chuck Collet Draw Bar 5C Collet Set Steady Rest 5 Quick Change Tool Holders Drill Chucks Centers Ground and Hardened Bed Machine is under power and available for inspection. Contact Kevin at MD Equipment Services LLC. 503) 858-2442 to schedule inspection, pickup, or purchase. CONTACT ME DIRECTLY BEFORE HITTING THE BUY IT NOW OPTION. I HAVE THIS MACHINE ADVERTISED ON OTHER SERVICES AND MAY HAVE A SALE PENDING. All equipment quoted fob. Loaded on Buyer's truck. Buyer responsible for shipping expense and logistics. The ... morepreferred method of payment for this item is bank wire transfer OR check mailed to Oregon head office prior to removal. If payment is in form of personal check. Then there is a 3-day waiting period for check clearance before equipment can be released for shipment. If buyer chooses to use a 3rd party payment processor such as PayPal, the buyer is responsible for all brokerage fees charged by the 3rd party payment processor. Buyer to verify all specifications and options of equipment prior to purchase. The equipment is authentically represented. The Seller disclaims any warranty. Expressed or implied, of the year, model, hour reading, guarantee of merchantability or fitness of the equipment; the goods are sold in an"As Is, Where Is" condition. The seller warrants that the goods are free and clear of all liens. Indebtedness, or liabilities. SUBJECT TO PRIOR SALE.
26" x 72" Cincinnati Hydrashift Engine Lathe with Digital Read Out Nice!
CINCINNATI HYRDASHIFT 26" x 72"cc ENGINE LATHE; NICE CLEAN RUNNING MACHINE MAY BE INSPECTED IN PLANT/UNDER POWER IN THE NORTHEAST. 17 1/2" Swing Over the Carriage. 2 1/8" Spindle Hole, 24- 960 RPM's; Equipped with 24" Face Plate(fixture in the photos is not included) 12" 3-Jaw Chuck, 18" 4-Jaw Chuck, 24" Face Plate, Aloris DA Quick Change Tool Post, Newall C-80 2-Axis Digital Read Out, Chip Pans and Coolant System. 10 HP Main Motor, 208 Volt/3 Phase. Approx. Dimensions are 12' Long x 48" Front to Back and 73" High; This lathe is being sold on location. We can help with loading and trucking. Please call Marc@ 732) 390-0006 to inspect under power in the Hartford. CT area.
ENGINE LATHE AMERICAN PACEMAKER- 41'' SWING OVER BED 21" SWING NO RESERVE
THIS IS A"NO RESERVE AUCTION" FOR A NICE AMERICAN PACEMAKER ENGINE LATHE! HIGHEST BIDDER WILL TAKE IT HOME- WILL LOAD ON YOUR TRUCK AT NO EXTRA COST! ENGINE LATHE AMERICAN PACEMAKER 41' SWING OVER BED 21" SWING OVER CROSS SLIDE 72" BETWEEN CENTER 6-600 RPM SPINDLE SPEEDS 2-7/8" HOLE THROUGH SPINDLE 16" CROSS SLIDE TRAVEL 16" TAILSTOCK TRAVEL 4 JAW CHUCK 96" WIDE X 194" LONG X 64" TALL 26.000LBS 460v 3 PHASE POWER IT HAS MANUAL INSTRUCTIONS* Hablamos Español* MACHINE IS IN GOOD WORKING CONDITIONS. LOCATED IN MIAMI FL. PLEASE BE ADVICE THAT THIS IS A USED MACHINE AND NOT A NEW ONE. IT HAS SOME NORMAL WARE AND USED. IF YOU WOULD LIKE TO INSPECT THE MACHINE BEFORE BIDDING OR YOUR BIDDING IS CONTINGENT UPON INSPECTING IT. PLEASE DO SO BEFORE THE END OF THE AUCTION OR PLACING A BID. WE ... moreENCOURAGE BIDDER TO INSPECT THE EQUIPMENT. MACHINE IS SOLD AS IS WHERE IT IS WITH NO WARRANTIES OF ANY KIND SINCE IS A USED MACHINE. THE MACHINE IS USED AND HAS BEEN LISTED AT A GREAT PRICE FOR FAST SALE. THIS IS NOT A RESERVED AUCTION. Note: PAYMENT MUST BE MADE WITHNG 48 HOURS AFTER BIDDING ENDS. PLEASE CONTACT US BEFORE MAKING ANY PAYMENT. IF YOU ARE A FLORIDA STATE BUYER DON'T FORGET TO ADD 7% SALES TAXES TO YOUR TOTAL ITEM PRICE. THANK YOU.
CLAUSING METOSA ENGINE LATHE C2087-VS
CLAUSING METOSA C2087VS 87" gap. 12" Chuck Lathe equipped with a GE tachometer reader. Cleaned and painted thoroughly Dual Inch/Metric Dials Dead Center Micro Carriage Stop 4-Position Bed Stop Coolant System One-Shot Lubrication Interlocking Chuck Guard Lathe Lamp Thread Dial Indicator Drive Plate T-Slotted Top Slide Electro-Magnetic Spindle Brake Chip Pan Chip Guard Tools and Manual Cost includes loading in container. Flat or step deck without crate or skid, charges for fabricating a skid are extras Please provide a postal zip code for a freight quote. Specify if it's to be delivered to a truck accessible whse, truck level dock, etc. we have access to many freight carriers to get you a low shipping cost. We sell FOB our dock. All items have to be prepaid before we ship. Inspections are welcome and we gladly assist you with ... moreyour travel arrangements. This machine can be run for a test. Approximated weigh:4900 lbs/ Dimensions: 145" x 45" x 45" Border clearance. We will take care of all paperwork related issues. We accept only payments by wire or transfer to our branch of the Toronto Dominion Bank in Toronto. Ontario We can provide business references upon request. Please be aware that we feel that your choice is a privilege and we'll do what is right to satisfy your expectation. HABLAMOS ESPANOL Check out my! CANADIAN RESIDENTS WILL BE CHARGED FOR HST TAX This machine is sold"As Is" with not warranties. Please inspect the pictures for what you see is what we will ship to you, We want our customers to be satisfied with their purchases and I'll go the extra mile to solve issues pertaining to your purchase. Payment: We accept payment with wires or many transfer into our account or certified bank drafts from banks located in the continental USA or Canada. No Paypal payments over $1000.00. Shipping: Free local pickup or ships by truck to most commercial addresses in the continental USA for around $700. Please read below( Shipping) and know that this is NOT a firm quote. We
Celtic 17 x 60 In. Engine Lathe 24030
in titles& description Name: Celtic 17 x 60 In. Engine Lathe, Ticket# 24030, Size: 17 in. x 60 in, Manufacturer: Celtic, Item located at: Morrisville. PA, Condition: Used, Terms& Condition: As is where is, Description: Celtic 17 in. x 60 in. Engine Lathe 1 3/4" Through Spindle 220 V Max Swing 19" 10" Max Swing over slide 30- 1350 RPM 12 in. 3-Jaw Chuck 4-Way Tool Post. Inch/mm Threading Includes cabinet of tooling Overall Dimensions: 108" x 40" x 54" | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
JET 1440-3PGH 14x40 Gap Bed Engine Lathe / 3 1/8 inch BORE through spindle
Jet 1440-3PGH 14x40 Gap Bed Engine Lathe- Model no. 1440-3PGH- S/N. JW0235- Motor. 7 1/2 HP. 3 Phase, 220/440- Swing. 14" Swing over gap. 23 5/8" Distance between centers. 40" Hole through spindle. 3 1/8" Chuck. 10" Three Jaw- Spindle Speeds. 12 Speeds 40-1600 RPM- Self contained coolant system- Steady rests Outstanding price on a quality good condition lathe! Please inquire about shipping/pickup if not local.
WACHEON MACHINERY 17"G x 40" GAP ENGINE LATHE + PNEUMATIC TAIL STOCK 435-1000
WACHEON MACHINERY 17"G x 40" GAP ENGINE LATHE + PNEUMATIC TAIL STOCK 435-1000 Click Images to Enlarge ​WACHEON MACHINERY 17"G x 40" GAP ENGINE LATHE + PNEUMATIC TAIL STOCK 435-1000 5 HP MOTOR 220/440 VOLTS 3 PHASE 60 HZ SERIAL NO: 8904-66 MFG DATE: 89.04 THROUGH HOLE: 2-1/8" 4 MORSE TAPER TAIL STOCK CHUCK DIAMETER 12-1/2" 3 JAW FEEDS AND SPEED PLATES ARE MISSING MEASURES: 87" x 45" x 72" WITHOUT PEG BOARD) PLEASE CALL FOR WEIGHT LOADING FEE: $35 CLOSED FROM 11AM-12PM FOR LUNCH Condition: Used andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not ... morewish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) A $25.00 Loading fee will apply unless stated in the listing. A RESTOCKING FEE MAY APPLY A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cann
SIDNEY ENGINE LATHE, 16" BY 60" CTRS, WELL TOOLED.
This is for a nice Sidney engine lathe. 16" swing by 60" centers. 16 spindle speeds from 25 to 1000 RPM, 48 threads from 1 1/2 to 92 TPI, 48 feeds from.0027" to.172 IPM Has coolant, has a tracing attachment, 1 1/2" hole thru spindle, has a 12" 4 jaw chuck, a 12" 3 jaw chuck, and a 14" face plate. Steady rest has a 4" dia capacity. Spindle nose is a D1-5 spindle nose. Lathe is being offered as is in Worcester, MA. Lathe is under power and can be shown by appointment. Buyer is responsible for rigging and transporting lathe from location, which is a machine shop, ground level, no loading dock. Thanks for looking and check out my other'Ebay auctions! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-145c43240fb-0x111-
30" X 84" DEAN SMITH & GRACE "TYPE 30" GAP-TYPE ENGINE LATHE - #27175
30" x 84" DEAN SMITH& GRACE GAP-TYPE LATHE#27175 New 1965. Serial No 35670-5-65, Model Type 30 EQUIPPED WITH: 30" 4-Jaw Chuck Coolant- Chip Pan Threading CATALOGUE SPECIFICATIONS: Hole Thru Spindle. 5" Swing Over Bed Ways. Rated. 30" Swing Over Bed. Actual. 33" Swing thru Gap Distance Between Centers. 84" 12) Spindle Speeds. Range. 7.6 to 420 RPM PRICE: LOCATION. $10.000.00. ALL SUBJECT/EQUIPMENT SUBJECT TP PRIOR SELL.
WASINO WILDCAT LEO 20" SWING x 72" BED LENGTH METAL WORKING ENGINE LATHE
WASINO WILDCAT LEO 20" SWING x 72" BED LENGTH METAL WORKING ENGINE LATHE Click Images to Enlarge ​WASINO WILDCAT LEO 20" SWING x 72" BED LENGTH METAL WORKING ENGINE LATHE SOME PLAY IN THE TRAVELS. NEEDS A LITTLE TLC. COMES AS SHOWN IN PHOTOS. PLEASE FEEL FREE TO MAKE AN APPOINTMENT TO CHECK OUT THIS LATHE IN PERSON PRIOR TO PURCHASE SERIAL NO: 5920 TOOL POST HOLDER CAPACITY: 2-1/8" PNEUMATIC TAILSTOCK 4 MORSE TAPER TAILSTOCK SPEEDS: 23-1.800 RPM MOTOR RPM: 1.740 26 AMPS 220/440 VOLTS 7.5 KW MOTOR 3 PHASE 2-1/4" THROUGH HOLE PLATE DIAMETER: 11-3/4" PLEASE CALL FOR WEIGHT LOADING FEE: $30. CLOSED FROM 11AM-12PM FOR LUNCH Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic ... moreI will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) A $25.00 Loading fee will apply unless stated in the listing. A RESTOCKING FEE MAY APPLY A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or
MORISEIKI MORI SEIKI ENGINE LATHE 18" SWING OVER BED 3.7 KW MOTOR 55" BED LENGTH
MORISEIKI MORI SEIKI ENGINE LATHE 18" SWING OVER BED 3.7 KW MOTOR 55" BED LENGTH Click Images to Enlarge MORISEIKI MORI SEIKI ENGINE LATHE 55" TOTAL BED LENGTH. PNEUMATIC TAILSTOCK SPEEDS: 32- 1.800 BISON 10" CHUCK 1-5/8" TOOL HOLDER CAPACITY TOOL POST SLIDE IS NOT FUNCTIONING 3.7 KW 13 AMPS. 220/440 VOLTS SWING OVER BED: 18" 4 MORSE TAPER TAILSTOCK OVERALL MEASUREMENTS: 88" x 44" x 54" PLEASE CALL FOR WEIGHT LOADING FEE: $30 CLOSED FROM 11AM-12PM FOR LUNCH Condition: Used andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx ... moreFreight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) A $25.00 Loading fee will apply unless stated in the listing. A RESTOCKING FEE MAY APPLY A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped throug
MORISEIKI MORI SEIKI ENGINE LATHE MODEL MS-850 5.5 HP MOTOR 55" TOTAL BED LENGTH
MORISEIKI MORI SEIKI ENGINE LATHE MODEL MS-850 5.5 HP MOTOR 55" TOTAL BED LENGTH Click Images to Enlarge ​MORISEIKI ENGINE LATHE MODEL MS-850 5.5 HP MOTOR 55" TOTAL BED LENGTH SPEEDS: 32- 1.800 BISON 10" CHUCK 1-5/8" TOOL HOLDER CAPACITY TOOL POST SLIDE IS NOT FUNCTIONING MOTOR SEEMS TO HAVE BEEN RECENTLY REPLACED 5.5 HP 1740 MOTOR RPM 200/400 VOLTS SWING OVER BED: 18" 4 MORSE TAPER TAILSTOCK OVERALL MEASUREMENTS: 88" x 44" x 54" PLEASE CALL FOR WEIGHT LOADING FEE: $30 CLOSED FROM 11AM-12PM FOR LUNCH Condition: Used andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. ... moreIf you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) A $25.00 Loading fee will apply unless stated in the listing. A RESTOCKING FEE MAY APPLY A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping
TOS Engine Lathe 24/32 X 160 Model 71N
This outstanding Engine Lathe is located in our Berea. Ohio facility. Really solid lathe with light use, offering 32" in the removable gap section removed. Ways appear to be in good shape. Rapid motor on the carriage assist you with these long travels and set up. Steady rest comes with this unit along with a 18" Chuck. Wiring was updated and control looks good. Regardless of using PayPal. This machine does not ship until payment in full is paid prior to loading. Wire transfer is our normal operational means of payment for items over 5,000. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-145e0925e25-0x11b-
HENDY ENGINE LATHE 14" BY 54" RUNS GREAT, LOADS OF TOOLING
This is a Hendey lathe. 14" by 54" ctrs, Serial number 3240. Runs nice, 18 spindle speeds from 19 to 1000 RPM, 1 1/2" hole thru spindle, 48 threading ranges from 1 1/2 to 80 TPI and 48 feeds from.0031 to.1666 IPR. Comes with tracing unit, 10" three jaw chuck, 10" four jaw chuck, 14" face plate, 7 1/2" dia. drive plate, Steady rest with 4" cap. Travel dial on longitudinal travel, H9 collet set up with handwheel, spindle adapter and 17 collets. Machine is being sold as is, where is, in Worcester, Ma. It is under power so if you want to see it. Any questions, please email or you can call me at 508-523-0464, Joe. Thanks for looking and check out my other Ebay auctions! 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-145f1176243-0x114-
WASINO LEO 18" x 68" BED LENGTH ENGINE LATHE + PNEUMATIC AIR TAILSTOCK
WASINO LEO 18" x 68" BED LENGTH ENGINE LATHE + PNEUMATIC AIR TAILSTOCK Click Images to Enlarge ​WASINO LEO 18" x 68" BED LENGTH ENGINE LATHE + PNEUMATIC AIR TAILSTOCK 23- 1.800 RPM SPEEDS TOOL POST SLIDE NOT FUNCTIONING 4 MORSE TAPER PNEUMATIC TAILSTOCK SERIAL NO: 6947 THROUGH HOLE: 2-1/8" 2-1/8" TOOL POST CAPACITY 12-1/2" DIAMETER BISON CHUCK KW: 7.5 60 HZ 220/440 AMPS: 26. LOADING FEE: $30 PLEASE CALL FOR WEIGHT CLOSED FROM 11AM-12PM FOR LUNCH Condition: Used andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please ... morecontact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) A $25.00 Loading fee will apply unless stated in the listing. A RESTOCKING FEE MAY APPLY A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items o
38" X 132" AMERICAN "PACEMAKER" ENGINE LATHE #27218
38" X 132" AMERICAN"PACEMAKER" ENGINE LATHE#27218 New 1957. Rebuilt 1990, Serial No. 75365/57, Model 32X132. Style I EQUIPPED WITH: 32" 4-Jaw Chuck w/Jaws(2) Steady Rests Power Rapid Traverse Flame Hardened Ways CATALOGUE SPECIFICATIONS: Swing Over Bed Ways. Rated. 32" Swing Over Bed Ways. Actual. 38" Swing Over Carriage Wings. 36" Swing Over Cross-Slide. 24" Distance Between Centers. 132" Hole Thru Spindle. 2-7/8" 27) Spindle Speeds. Range. 6 to 600 RPM(60) Longitudinal Carriage Feeds. 004 to.240 IPR(60) Thread Changes. Range. 1/2 to 30 TPI Top Slide Travel. 8" Tailstock. Spindle Taper. 6 MT Tailstock. Spindle Diameter. 7-1/2" Tailstock. Spindle Travel. 18" Motor. Horsepower. 30 HP Weight. Approximately. 35,750 LBS NOTE: This Machine Appears To Be In Very Good Conditon ... moreAnd Was Completely Rebuilt In 1990. PRICE: F.O.B. OUR WAREHOUSE. $32.500.00. ALL MACHINE/EQUIPMENT SUBJECT TO PRIOR SELL.
Used Gisholt 5L Saddle Type Turret Engine Lathe 40" Swing 136" Centers 24" Chuck
1963 GISHOLT 5L Saddle Type Turret Lathe Machine is in excellent condition and can be seen under power as needed Specifications: Swing Over Bedways. 40" Swing Over Front Carriage. 32" Spindle Thru Hole. 12.5" Centers. 136" Chuck Size. 24" 3-Jaw Spindle Motor. 40HP Power Requirements. 220/440 Volt Equipped With: Cross Sliding Turret Extended Bed Hardways Full Length Chip Pan w/Coolant Pump Used Equipment Sales Contact: Jason Stob 708 790-3358 Jason@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a strong chance that this item may sell locally at our facility before we take it down from ebay. Please verify it’s availability before purchasing! Specifications and features are subject to buyer verification ... moreCleared funds are required prior to shipment Payment methods include wire transfer. Certified check, or company check Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 60007. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(520 Machinery Sales LLC and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as
american pacemaker USA engine lathe 16"/20"x78" style c 220/440 15hp 1956
actual swing over bedways is 21.5" actual swing over cross slide is 14" 2"hole through d-1-6"camlock spindle nose 27 spindle speeds 23-1500 RPM 66 thread ranges 2-120 TPI 66 Feed Changes.0015-0913 NO4. morse taper hardened and ground bedways floor space;5'x14'x4'high weight 12.000 LBS we have an overhead crane in the shop to load. i believe there is a 15"4-jaw chuck taper attachment 18"face plate steady rest coolant system
40" X 72" ENGINE LATHE AMERICAN PACEMAKER NO RESERVE
THIS IS A" NO RESERVE AUCTION" FOR A NICE AMERICAN PACEMAKER ENGINE LATHE! HIGHEST BIDDER WILL TAKE IT HOME- WILL LOAD ON YOUR TRUCK AT NO EXTRA COST! ENGINE LATHE AMERICAN PACEMAKER 41' SWING OVER BED 21" SWING OVER CROSS SLIDE 72" BETWEEN CENTER 6-600 RPM SPINDLE SPEEDS 2-7/8" HOLE THROUGH SPINDLE 16" CROSS SLIDE TRAVEL 16" TAILSTOCK TRAVEL 4 JAW CHUCK 96" WIDE X 194" LONG X 64" TALL 26.000LBS 460v 3 PHASE POWER IT HAS MANUAL INSTRUCTIONS* Hablamos Español* MACHINE IS IN GOOD WORKING CONDITIONS. LOCATED IN MIAMI FL. PLEASE BE ADVICE THAT THIS IS A USED MACHINE AND NOT A NEW ONE. IT HAS SOME NORMAL WARE AND USED. IF YOU WOULD LIKE TO INSPECT THE MACHINE BEFORE BIDDING OR YOUR BIDDING IS CONTINGENT UPON INSPECTING IT. PLEASE DO SO BEFORE THE END OF THE AUCTION OR PLACING A BID. WE ... moreENCOURAGE BIDDER TO INSPECT THE EQUIPMENT. MACHINE IS SOLD AS IS WHERE IT IS WITH NO WARRANTIES OF ANY KIND SINCE IS A USED MACHINE. THE MACHINE IS USED AND HAS BEEN LISTED AT A GREAT PRICE FOR FAST SALE. THIS IS NOT A RESERVED AUCTION. Note: PAYMENT MUST BE MADE WITHNG 48 HOURS AFTER BIDDING ENDS. PLEASE CONTACT US BEFORE MAKING ANY PAYMENT. IF YOU ARE A FLORIDA STATE BUYER DON'T FORGET TO ADD 7% SALES TAXES TO YOUR TOTAL ITEM PRICE. THANK YOU.
T.O.S TRENCIN Mdl. SN55B-71B Manual Engine Lathe,
T.O.S TRENCIN Mdl. SN55B-71B Manual Engine Lathe, Serial Number: 450-62-0194. 7.5 HP drive motor, 13" swing. 120" distance between centers, 10–1.000 variable speed RPM, auto feed carriage. 12" 3-jaw chuck. Steady rest. Tail stock. For more information or questions please email Sean, ACAMACHINERYSALES@GMAIL.COM
1997 TOS Trencin SN40c 16"x80" gap bed engine lathe NO RESERVE!!!
Up for sale I have one TOS Trencin SN40c gap bed engine lathe. Unit was new in 1997. Machine has been very well kept. Swing over the bed is 16" swing in the gap is 23.5" Swing over the cross slide is 8.5" Cross slide travel 11" 80" between centers, spindle is D1-6 with 2" spindle bore, speeds from 22-2000rpm. Rapid traverse on both axis, bronze nuts for longer wear life, aloris type tool post, fagor innova 20i-t 2 axis DRO, 10" TOS 3 jaw chuck, 12" TOS 4 jaw chuck, 10" Bison 2 jaw chuck, steady rest, follower rest, chip guard, coolant system, live center, dead center, drill chuck, metric and standard thread cutting capability. Very very nice machine. Total weight around 6k lbs. More pictures available upon request. Can be viewed running in 2 videos on YouTube at And The second video is of an indicator ... moreon the spindle nose. This will give you a good idea just how nice and how well kept this machine is. Please direct any questions to Ryan at 678-438-1692. Serious inquiries only. Machine is located in Cumming GA and is under power for inspection. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-146a4b2fbcd-0x11a-
SHARP PRECISION ENGINE GAP LATHE MODEL 1340
Description: CAPACITY Swing over bed. 13" 14" Swing over cross slide. 7 5/8" 8 5/8" Swing over gap. 19" 20" Width of bed. 8 1/2" Distance between centers. 40" HEADSTOCK Spindle nose type. D1-4 camlock Spindle bore. 1 1/2" Spindle speeds 1340F/ 1440F. 45- 1.800 rpm[16] 1440V uses Electronic Variable Speed control) 30-2200 rpm Taper of spindle bore. MT#5 THREADS AND FEEDS longitudinal feeds- in/ rev[40] 0.0012- 0.0294" Cross feed- in/ 40] 0.0003- 0.01" inch threads[40] 4- 112 tpi Metric threads[22] 0.45- 7.5mm leadscrew pitch. Diameter. 8 tpi, 3/4" CARRIAGE Saddle width. 14" Apron width. 13 1/2" Cross slide width. 13 1/2" Cross slide travel. 6 1/2" 7" compound rest travel. 3 1/2" 4" compound width x length. 3 1/2 x 8 1/2" BED Bed length. 45" ... more55" Bed width. 8 1/2" TAILSTOCK Quill travel(graduated) 4 1/2" Quill diameter. 1 1/2" Quill taper. MT#3 GENERAL Spindle motor(220V or 440V. 60Hz, 3 phase 3 hp Net weight(approx. 1.540 LBS 1,650 LBS* STANDARD EQUIPMENT: Steady Rest. Coolant System, 4-Way Tool Post, Removable Gap) 2-Speed Motor Wired 220V TermsThis item is being sold“As is. Where is” No returns or exchanges. The buyer is responsible for verifying the condition and operational functions. Sale must be completed within 4 days of purchase otherwise sale is considered delinquent. If your item will remain in our warehouse for 30 days passed invoice date. A $1/ sq foot/ month warehousing fee will be applied. After the auction ends. Please provide the following information Complete company information: address. Contact person, phone number, fax number, destination address if
LEBLOND MODEL 3220 HEAVY DUTY ENGINE LATHE - NEW 1964
LEBLOND 3220 HEAVY DUTY ENGINE LATHE SWING: 32" DISTANCE BETWEEN CENTERS: 48"cc SWING OVER CROSSLIDE: 20" SPINDLE SPEEDS: LOW 10-48 RPM. MID 54-249 RPM, HIGH 279-1300 RPMT SPINDLE BORE: 2-1/4" 24" 4-JAW CHUCK. TOOL POST THREADING TAPER TURNING ATTACHMENT COOLANT& CHIP PAN WORKLIGHT OPERATION MANUALS FOR MORE INFORMATION CONTACT GARY@949-246-2978 or email:
MONARCH 27N HEAVY DUTY ENGINE LATHE 42.5" x 84"cc
MONARCH 42.5" x 84"cc HEAVY DUTY ENGINE LATHE SWING: 42.5" DISTANCE BETWEEN CENTERS: 84" SPINDLE SPEEDS: 16) 2-202 RPM SPINDLE BORE: 2.5" MAIN MOTOR: 15-HP THREADING 36" 4-JAW CHUCK w/JAWS COOLANT& CHIP PAN WORK LIGHT ALL MANUALS FOR MORE INFORMATION CONTACT GARY@ 949-246-2978 or email: 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-146a63e018c-0x10c-
85" x 264" Wickes Heavy Duty Engine Lathe
85" x 264" Heavy Duty Engine Lathe MFG: Wickes Brothers(USA) YEAR: 1953. MODEL: 85 x 264. HOURS: UNKNOWN. CONTROL: Manual with tracer. MACHINE IS EQUIPED WITH ANTI-FRICTION BEARINGS. SWING OVER WAYS: 85" SWING OVER CROSS SLIDE: 60" SPINDLE SPEEDS(16) 1-140 rpm. FEEDS CROSS: 286" TO.002" FEEDS LONGITUDINAL:724" TO.006" THREADS: 1/2 TO 56 tpi. FACEPLATE DIAMETER: 72" MOTOR: 3/60/220-440VOLT 50hp. WEIGHT: 125.000LB. S/N: 7313. CROSS RAIL MOTOR: 22HP. Ken Dragotta. 414-315-2080.
MORI SEIKI WEBB WHACHEON (MS 1250) engine lathe
A nice Mori Seiki MS 1250 lathe 17x50 We went thru this lathe 2 years ago bought it back from the owner who was not able to use the lathe(health reasons) was in his garage. D1-6 cam-loc spindle 2in. thru hole(12) speeds 24-1800 rpm) inch/ metric threading(gear included) 8in 3 jaw chuck. 10in 4 jaw chuck,both chucks Bision) direct mount, face plate,steady rest, drill chuck, live center, coolant(not used) late hydrolic brake system(no cables) bed ways in very good condition no scratches or gouges.012 backlash in crosslide but can be adjusted to your liking,all origional electrical. Runs great can inspect under power test cuts OK buyer brings material and cutting tool. No coolant in tank, loading at no charge Questions call 714-848-5477 or email greermachinery.com or thru ebay thank you
Okuma Model LS Geared Head Engine Lathe ( LOW RESERVE )
Specifications: Swing Over Bed 21-1/4' Swing Over Cross Slide 13-3/4' Distance Between Centers 57' Spindle Speeds(12) 35 to 1800 rpm. Hole Thru Spindle 1-3/4. Feed Range(12) Longitudinal: 001 to.028" rev. Cross: 001 to.014" rev. Thread Range- Inch: 4 to 56 Thds/Inch. Metric: 5 to 7 mm. Module: 25 to 3.5. Diametral Pitch: 8 to 112. Cross Slide Travel 10-5/8. Compound Rest Travel 5-1/2. Tailstock Spindle Travel 5-7/8. Tailstock Spindle Taper# 4 Morse. Spindle Nose D-1-6" Camlock. Equipment. 12" 3-Jaw Chuck. Steady Rest. 3-Way Toolpost w/ Misc. Holders. Flood Coolant. Motor and Controls- 10 Hp 3/60/220-440 Volt- Wired for 220 Volt Operation. Floor Space 118" L-R x 44" F-B x 60" High Buyer responsible for pick up. Seller can load item for you if needed. 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-146a955ddeb-0x105-
GOODWAY Mdl. GW-1660 Manual Engine Lathe
GOODWAY Mdl. GW-1660 Manual Engine Lathe, s/n 74267. 7.5 HP drive motor. 9" swing, 51" distance between centers, 55–2.000 variable speed RPM, auto. feed carriage. 8" 3-jaw chuck. Tail stock, foot brake. Email Sean for more information or questions: AcAMachinerysales@gmail.com
26"/39" x 120" SUMMIT GAP BED ENGINE LATHE, MFG 1998, TAPER, INCH-MM, (2) S.R.'s
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 26"39" x 120" SUMMIT GAP BED ENGINE LATHE. MFG 1998, TAPER, INCH-MM, 2) S.R.s Ref# 151984 iammdna XLATHE 26"39" x 120" SUMMIT GAP BED ENGINE LATHE MODEL: 26" S/N: K-02-07, ... moreNEW: 1998 SPECIFICATIONS: SWING OVER BED. 28" SWING OVER CROSS SLIDE. 19-1/2" SWING OVER GAP. 39" LENGTH OF GAP IN FRONT OF F.P. 19-1/4" DISTANCE BETWEEN CENTERS. 120" SPINDLE SPEEDS(16) 14- 1.010 RPM. SPINDLE NOSE CAMLOCK. D1-8" HOLE THRU SPINDLE. 4-1/8" THREADING- INCH(70) 1/2- 56 TPI. THREADING- METRIC(61) 5- 56. LONGITUDINAL FEED RANGE(70) 0014" 1664" CROSS FEED RANGE(70) 0007" 083" TAILSTOCK TAPER. 5MT. TAILSTOCK SPINDLE TRAVEL. 9-1/2" TAILSTOCK SPINDLE DIAMETER. 3-3/8" APPROX WEIGHT. 12.500 LBS. APPROX DIMENSIONS. 204"L x 5'W x 5'6"H. EQUIPPED WITH: INCH& METRIC THREADING. TAPER ATTACHMENT. 3-JAW CHUCK. RAPID TRAVERSE OF CARRIAGE. 2) STEADY RESTs. FOLLOW REST. FOUR WAY TOOLPOST. COOLANT SYSTEM. 15 HORSE POWER SPINDLE MOTOR. INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE CONDITION: EXCELLENT* Machine Location: HARRISON. NJ Click Her
(1) USED 21"X60" MIGHTY TURN ML-2160GL GAP BED ENGINE LATHE
SPECIFICATIONS: SWING OVER BED: 21" SWING OVER CROSS SLIDE: 11 13/16" SWING IN GAP: 28" DISTANCE BETWEEN CENTERS: 60" SPINDLE BORE: 3 1/4" SPINDLE NOSE: D1-8 SPINDLE SPEEDS: 9- 1600 RPM SPINDLE MOTOR: 15 HP FEEDS- LONGITUDINAL(84) 0.001-0.24 IPR- CROSS(80) 0.00022-0.055 IPR THREADS- INCH(48) 1/8-72 TPI- METRIC(48) 0.25-124 MM ELECTRICAL REQ. 220V/3/60 WEIGHT: 7500 LBS EQUIPPED WITH: 10" 3 JAW CHUCK& 8" 6-JAW CHUCK TAPER TURNING ATTACHMENT FOLLOW REST& STEADY REST COOLANT SYSTEM& CHIP PAN Please contact Jeff at(888)998-4440 for more information about this machine.
Heidenreich & Harbeck Engine Lathe
10" 6 Jaw Chuck 17.5" Swing Over Bed 9" Swing Over Carriage 30" Between Centers Good Working Condition Ways have some wear 30 Day Return Buyer is responsible for arranging and paying for freight We will load on truck for free