In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
39.99
Buy It Now
$6.35 Shipping
Condition: Used
Location: Nashville, United States
$
25.99
Buy It Now
$4.99 Shipping
Condition: Used
Location: Spring Grove, United States
The lathe has a single tumbler QCGB as well.
$
19.99
Buy It Now
$4.35 Shipping
Condition: Used
Location: Nashville, United States
South Bend lathe apron oiler cup. Fits from Heavy 10 all the way through 24" lathes.
$
39.00
Buy It Now
$10.00 Shipping
Condition: Used
Location: Bristol, United States
$
24.99
Buy It Now
$9.95 Shipping
Condition: Used
Location: Garden Grove, United States
The following item is up for SALE - 1 - Lathe Chuck 5/8" Square Key Logan Cushman Southbend Handle OAL 12" Please visit my store I do offer discounted ... moreshipping to multiple item winners.
$
14.99
Buy It Now
$8.60 Shipping
Condition: Used
Location: Waukegan, United States
Up for sale is a lightly used leadscrew bearing bracket for a lathe. I believe it is for a South Bend. Just not 100%. I think it would work on some Logan ... morelathes. Item has a .502 hole and the mount holes are .405 and are 1" center to center. I have other lathe stuff listed. I will combine shipping. Thanks for looking.
$
54.99
Buy It Now
$6.25 Shipping
Condition: Used
Location: Nashville, United States
Good used condition pin is a replacement and will need to be cut to fit your assembly.
$
27.99
Buy It Now
Free Shipping
Condition: Used
Location: Spring Grove, United States
The lathe has a single tumbler QCGB as well.
$
39.99
Buy It Now
$4.85 Shipping
Condition: Used
Location: Nashville, United States
As shown, in good, sound condition, teeth are in great shape.
$
22.97
Buy It Now
$4.95 Shipping
Condition: Used
Location: Jamestown, United States
32nd Edition. How to Run a Lathe. South Bend Lathe Works. South Bend Lathes Works. South Bend Indiana. make Supersized seem small. Minor wear and soil ... more(mainly on cover page)- plus writing inside front cover.
$
9.99
Buy It Now
$10.75 Shipping
Condition: Used
Location: Waukegan, United States
Up for sale is a very nice condition South Bend heavy 10 lathe alum guard with gasket and screws. I have other lathe parts listed. I will combine shipping. ... moreFeel free to ask any questions. Thanks for looking. 
$
500.00
Buy It Now
$18.40 Shipping
Condition: Used
Location: Tewksbury, United States
For sale is a lightly used SOUL #SO-6X 3-Jaw Geared Scroll Lathe Chuck 6-1/2", made in Japan, with an original 1-1/2"-8 TPI backplate. Reversable jaws ... morehave no play in them. Includes key.
$
24.99
Buy It Now
$5.85 Shipping
Condition: Used
Location: Nashville, United States
$
26.99
Buy It Now
Free Shipping
Condition: Used
Location: Spring Grove, United States
The lathe has a single tumbler QCGB as well.
$
159.99
Buy It Now
$7.86 Shipping
Condition: Used
Location: Nashville, United States
$
9.99
Buy It Now
$4.65 Shipping
Condition: Used
Location: Nashville, United States
In good used condition.
$
49.99
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
South Bend Heavy 10" 10L 10R Lathe Gear 28 Tooth Reverse Tumbler. Free shipping to the lower 48 United States first class mail
$
49.99
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
South Bend Heavy 10" 10L 10R Lathe Gear 28 Tooth Reverse Tumbler. Free shipping to the lower 48 United States first class mail
$
12.99
Buy It Now
$8.65 Shipping
Condition: Used
Location: Nashville, United States
Nice assembly with minimal wear.Does not fit Heavy 10, regular 9", 10k, etc.
$
49.99
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
South Bend Heavy 10" 10L 10R Lathe Gear 28 Tooth Reverse Tumbler. Free shipping to the lower 48 United States first class mail
$
49.99
Buy It Now
$13.31 Shipping
Condition: Used
Location: Nashville, United States
$
18.89
Buy It Now
Free Shipping
Condition: New
Location: Blaine, United States
Manufactured with rolled edges and 4 small holes on the corners to easy display. Buy from us so you do not need to wait months for your products.
$
149.95
Buy It Now
$16.00 Shipping
Condition: Used
Location: Uxbridge, United States
This is the complete back gear with the eccentric shaft for a heavy 10" (10L) south bend lathe. Excellent condition. All of the gear teeth are perfect. ... moreHas been cleaned and lightly oiled.
$
13.79
Buy It Now
Free Shipping
Condition: New
Location: Alvord, United States
Belt B/5L 21/32 x 40in OC.
$
44.95
Buy It Now
Free Shipping
Condition: Used
Location: Waterford, United States
South Bend Lathe cutter tool gage. Up for your consideration is a nice stainless cutter gage by South Bend. Excellent used condition. Does have previous ... moreowner I.D. mark on backside. You get EXACTLY what you the pictures.
$
49.99
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
South Bend Heavy 10" 10L 10R Lathe Gear 28 Tooth Reverse Tumbler. Free shipping to the lower 48 United States first class mail
$
42.99
Buy It Now
$8.65 Shipping
Condition: Used
Location: Nashville, United States
Antique South Bend Series "O" lathe primary drive gear. Removed from a catalog number 386-B lathe. In good condition as shown. Photo of catalog page is ... morefor reference only.
$
29.95
Buy It Now
$4.95 Shipping
Condition: Used
Location: Jamestown, United States
South Bend Lathes Catalog. April 1 1930. South Bend Lathe Works. South Bend Indiana. Minor wear and soil on cover. Good Binding.
$
73.08
Buy It Now
$20.84 Shipping
Condition: New
Location: MALMESBURY, United Kingdom
Energy saving motion sensitive automatic on/off for long battery life. (CR2032 Cell not included).
$
9.99
Buy It Now
$10.75 Shipping
Condition: Used
Location: Waukegan, United States
Up for sale is a very nice condition South Bend heavy 10 lathe apron half nut lock plunger. I have other lathe parts listed. I will combine shipping. ... moreFeel free to ask any questions. Thanks for looking. 
$
9.99
Buy It Now
$4.25 Shipping
Condition: Used
Location: Nashville, United States
$
45.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
South Bend put out a series of four manuals for their lathe owners titled "How To Get The Most Out of Your Lathes.". These manuals were divided into the ... morefollowing subjects: Keeping Your Lathe Clean, Oiling The Lathe, The Installation And Leveling of The Lathe, and Keeping Your Lathe In Trim.
$
119.99
Buy It Now
$5.85 Shipping
Condition: Used
Location: Nashville, United States
As shown, in good, sound condition, good threads on screw & nut.
$
199.99
Buy It Now
Condition: Used
Location: Watertown, United States
ORIGINAL SOUTH BEND 9"10K METAL LATHE ACCESSORY COLLET RACK FOR 3C COLLETS PT NO. CRK-100N The photos are accurate to each description and exact ... moreto what you will receive. Please feel free to email with any questions!
$
24.99
Buy It Now
$10.65 Shipping
Condition: Used
Location: Nashville, United States
$
25.00
Buy It Now
$12.86 Shipping
Condition: Used
Location: Manassas, United States
58 1050004. . . . . 40 1050005. . . . . 40 1050007. . . . . 40 1050008. . . . . 40 1050009. . . . . 40 1050011. . . . . 40 1050012. . . . . 40 1050016. ... more. . .
$
50.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Goddard, United States
South Bend 17" Turn-nado Lathe. The manual has 80 pages. About This Manual : This is a high quality reproduction manual which has been scanned with a ... morehigh resolution scanner. Operation, Maintenance & Parts Manual.
$
32.99
Buy It Now
$6.44 Shipping
Condition: Used
Location: Nashville, United States
As shown, in good used condition.
$
28.88
Buy It Now
Free Shipping
Condition: New
Location: Chicago, United States
For South Bend 16" lathe. Center bore. 75 (3/4"). This gear made out of out of Nylon - tough and flexible plastic. Gear face width 1.00". Gear OD: 2.740".
$
21.06
Buy It Now
Free Shipping
Condition: New
Location: Alvord, United States
Belt 5LK 5/8 x 40in OC (BK37).
$
44.95
Buy It Now
Free Shipping
Condition: Brand New
Location: Durham, United States
The manual is a bound 8.5" x 11" soft cover, 156 pages in length and is fully illustrated with over 450 B&W photographs plus step-by-step instructions ... moreon refurbishing your lathe. As you will notice, this is NOT a fuzzy Xerox reprint of an existing manual.
$
115.00
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! 13" South Bend Lathe.3 Step Headstock Cone Pulley. Removed From a L00 Spindle. Any ... moreQuestions Please Feel Free To Ask. Thanks. Check out my!
$
34.95
Buy It Now
Free Shipping
Condition: Brand New
Location: Durham, United States
If you are contemplating doing a "Spring Cleaning" on that old South Bend sitting in your garage, this manual is what you will need to get the job done. ... more". As you will notice, this is not a fuzzy Xerox reprint of an older existing manual.
$
17.99
Buy It Now
$8.65 Shipping
Condition: Used
Location: Nashville, United States
Fits South Bend 13" lathes with single tumbler gearboxes.
$
70.00
3d 12h 14m 41s
0 bids
$15.00 Shipping
Condition: Used
Location: Thomaston, United States
South Bend part no. 40 large faceplate. Great condition- no chips, cracks or stripped threads.
$
24.88
Buy It Now
Free Shipping
Condition: New
Location: Chicago, United States
South Bend 9/10K lathe. 48 tooth Nylon gear. Center bore 0.5625 (9/16) with single 0.125 (1/8) key. This gear FDM made out of out of Nylon - tough and ... moreflexible plastic. All other materials (PLA, ABC, PET, etc.) will grind creating a plastic dust and eventually fail!
$
89.99
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
South Bend Lathe Cross Feed Compound Rest Base Casting. Free shipping to the lower 48 United States
$
49.99
Buy It Now
$26.50 Shipping
Condition: Used
Location: Victorville, United States
Craftsman Lathe Parts. Cleaning out all of my Atlas Craftsman, Logan and South Bend Lathe Parts.
$
35.00
Buy It Now
$14.00 Shipping
Condition: Used
Location: Bloomfield, United States
South Bend 13" Lathe Apron Idler Gear Shifter Assembly. Good used condition with no cracks or chips Shifter lever is solid and the spring loaded knob ... moreworks good Gear has some dried gear oil on it, but in good condition. I did not clean the part to show the condition it came from the lathe. See pictures for further inspection schematic and part numbers in the pictures Have questions feel free to ask Thanks
$
27.99
Buy It Now
$4.25 Shipping
Condition: Used
Location: Nashville, United States
NICE ORIGINAL COMPUND REST TOP GIB AND SCREWS FOR A SOUTH BEND 9" 10K METAL LATHE. GIB PART NUMBER PT257NK1. WILL ALWAYS COMBINE SHIPPING. ANY QUESTIONS ... morePLEASE FEEL FREE TO E-MAIL. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
59.99
Buy It Now
$8.65 Shipping
Condition: Used
Location: Nashville, United States
As shown, in overall good used condition with minimal wear. For 13" lathes with single tumbler gearbox only.
$
4.79
Buy It Now
$3.96 Shipping
Condition: Unspecified
Location: Clinton, United States
See scans for details on the condition. The black border is so all the edges can be seen and is not part of the playing card itself. Many of these will ... morebe out of my personal collections. I will get back to you as soon as possible.
$
18.99
Buy It Now
Free Shipping
Condition: Used
Location: West Newbury, United States
Nice reading for the SBL enthusiast or someone who want to learn about lathes and screw cutting machines
$
64.50
Buy It Now
Free Shipping
Condition: Used
Location: Bath, United States
A GENERAL LINE CATALOGUE OF LATHES AND ACCESSORIES, No. 78, by the South Bend Lathe Works, South Bend, Indiana. This September 1922 Edition of 32 pages ... moremeasures 6 1/4" tall x 3 1/2" wide. It illustrates and documents the full line of machine tools offered by this prominent manufacturer at the time of publication. It is in excellent collector quality condition. Length = 6.25 Inches (Ref. Id No.: 123918) [Free Shipping]
$
27.99
Buy It Now
Free Shipping
Condition: Used
Location: Spring Grove, United States
The lathe has a single tumbler QCGB as well.
$
14.99
Buy It Now
Free Shipping
Condition: Used
Location: Nashville, United States
$
36.00
Buy It Now
Free Shipping
Condition: Used
Location: Ottawa, United States
$
30.00
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
This is a reproduction, not a photocopy, of a South Bend Parts Manual and Catalog for 9" & 10" Lathes. I included a short descriptive catalog to help ... moreidentify which lathe a person has, because there were many different models.
$
28.00
Buy It Now
Free Shipping
Condition: New
Location: Franklin, United States
South bend light 1960’s 9” and 10” lathe tool holder t-nut. size is. 860 top. 1.235 bottom.1/2 thick.1/4 deep slot.
$
14.08
Buy It Now
Free Shipping
Condition: New
Location: Alvord, United States
Belt B/5L 21/32 x 43in OC.
 In 

Former Listings  
 
Vintage South Bend Lathe Works catalog 5205 drill press bench shaper
Vintage 1952 South Bend Lathe Works catalog 5205. No pages missing! Check out my! g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-14b092c735c-0x115-
6" 3 jaw Kalamazoo chuck for South Bend lathe
This Kalamazoo chuck is in excellent condition. It was mounted on South Bend 9A with a 1 1/2" 8 thread. Price includes 2 sets of jaws for ID and OD clamping.
LATHE DOG HOLE IS 1 1/2" COULD USE ON SOUTH BEND ATLAS CRAFTSMAN LOGAN LATHE
LATHE DOG HOLE IS 1 1/2" LATHE NO BREAKS OR REPAIRS LEG IS 2 1/2" FROM BOTTOM TO TOP SHOWS WEAR THREADS IN AND THREADS OUT NICELY IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ ... moreMY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM. IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-14b0c3e4377-0x113-
9" South Bend Lathe 3 1/2 Foot Bed Some Tooling Nice On Kennedy 5 Drawer Bench
NO PAY PAL ON THIS ITEM. CASH ON PICKUP I suggest fully inspecting this lathe in our shop. Is still under power and can be tested in any way before final purchase. For pickup in Mountain Top PA 18707. Lathe is fairly heavy and we have no fork lift. You will need to bring help. Lathe is used and dirty from sitting in my shop. Will need a good cleaning. Here is the information from the manufacturers plate on the front of the machine. 110 volt power single phase 9" South Bend Lathe Model A Catalog Number 714Z Bed Length 3 1/2' So there is no confusion this is the entire length of the bed. Not travel) Serial number 22214NAR9 Please do your research on this lathe model The only tooling that comes with the lathe is shown in the photos. The quick change tooling is MSC brand Phase III Nothing not shown in the photos comes with this lathe. ... moreIs mounted on a Kennedy bench. 5 drawers with a hardwood top. Please feel free to ask any questions before the auction ends. Purchase is final.
South Bend 15" x 40" Precision Engine Lathe - Model SBL 400 - MINT conditon!
For sale here is(1) Used, SOUTHBEND 15" X 40" PRECISION ENGINE LATHE. LOADED WITH TOOLING AND ACCESSORIES. EVERY OPTION THAT WAS AVAILABLE WHEN THIS MACHINE WAS NEW IS INCLUDED; MOST OF IT NEVER USED. THE BEDWAYS ARE LIKE NEW! THE MACHINE RUNS LIKE NEW! IT FEATURES A FULL LENGTH FOOT-OPERATED BRAKE FOR STOPPING CHUCK ROTATION. WE CAN QUOTE FREIGHT TO ANY OF THE 48 LOWER CONTIGUOUS UNITED STATES. IF YOU WANT A TOP CONDITION ENGINE LATHE THAT'S TRULY"PLUG AND PLAY" THIS IS IT! QUESTIONS? CALL 586-754-9200 ASK FOR SALES. WE WILL GLADLY LOAD ONTO YOUR FLATBED TRUCK FOR FREE. NO BOX VANS OR ENCLOSED TRAILERS. NOTE: We prefer NOT to be paid through PayPal. If you're purchase the machine please contact us for instructions on sending a check. Or doing a wire transfer. SPECIFICATIONS: SPECIFICATIONS: Swing Over Bed. 15-3/4" ... moreSwing Over Cross Slide. 8-21/32" Distance Between Centers. 40" Cross Slide Travel. 9" Compound Slide Travel. 4-11/32" Spindle Nose. Camlock D1-6" Spindle Bore Diameter. 2-1/16" Size of Center. 4 MT Spindle Speed Range. 12) 59- 1400 RPM 32 feeds and threads Tailstock Quill Diameter 1" Tailstock Quill I.D. Taper#3 MT Tailstock Quill Travel 5-7/10" 145mm) Motor 4-1/2 HP Electric 230/60/3 Approximate Weight 4000 Lbs. Floor Space 78" L-R x 35" F-B Height 50" EQUIPPED WITH: Taper attachment Inch. Metric, modul threading w/change gears 9" Three jaw chuck Tailstock 3/4" Jacobs Chuck for tailstock Aloris four way tool post with misc. holders Automatic spindle lubrication Manual way lubrication 12" 4 jaw Chuck
South Bend 9-inch Lathe Underneath Motor Mount Hanger.
Motor mount hanger for an underneath table top South Bend lathe in great shape. Please look at all the pic's as they are part of the description. If you have any questions please ask! Winning bidder has 3 days after end of auction to pay other wise item will be relisted if more time is needed please message me. I only ship to the lower 48 states in the U.S.A. Thanks and happy bidding!
South Bend CL187RB 10" x 32" Tool Room Lathe - 1.5" Thru Hole - X/Y DRO
South Bend CL187RB 10" x 32" Tool Room Lathe Catalog# CL187RB. S# 22160 R, Bed length 4.5, 10" Swing, 32" Between centers, 1.5" Thru hole, Acu-Rite II X/Y DRO, 12 Spindle speeds via 3 way step pulley, Quick change belt hand lever in base, 70 Threading ranges from 4 to 480, Flame hardened bed ways, Fwd/Rev, Safety shield over chuck, Collet rack, Built in chip catch pan, Storage in base, Overall Dim. 5' 5"L x 35"W x 64"H, Est. Wt. 1,200 lbs. Video- http:youtu.be/LK0N_ys_2OU Shipping: The buyer is responsible for all shipping& handling costs. Contact us for a shipping quote. We'll do our best to get you the lowest rate possible. We also allow local pick-up here at our facility in Hugo. MN 55038. We can load at no extra cost. Return Policy: We offer a 30 day return policy on all of our machines ... moreunless otherwise stated. Return shipping to be paid by the buyer. Item must be returned within 30 days of receiving the item. Payment: We accept PayPal. Credit cards(thru PayPal) Cashier's checks& Business checks. We will not ship the item until payment has been received& cleared. Buyers: We will not leave feedback for buyers until feedback has been received. Should you have any issues with your item please contact us before leaving neutral or negative feedback so we can resolve any problems. Additional Information: We test every machine to make sure it is fully functional before we ship it out. Also machines can be inspected under power here at our facility. Contact us to schedule an appointment. Thank You!
South Bend 9 inch Lathe Model A Quick Change Gear Box
South Bend 9 inch Lathe Model A Quick Change Gear Box Requires a clean up but gearing is in very good condition with no visible signs of crashes. includes lead screw drive gear.
How to run a lathe book 56st edition South Bend Lathe works 1966 good condition
Nice book. Lots of lathe information. 1966 128 pages.
HOW TO RUN A LATHE,1920 SOUTH BEND LATHE WORKS,SOUTH BEND,IND.
SEE PICTURES 5 1/4 x 7.5 Shipping within the United States unless pre-notified. Prices reflect U.S. Shipping only. I will combine shipping on multiple items purchased within 5 days. Just wait for the invoice before paying or write me after you have won for total shipping costs. Be sure to check my other great listings. Thank you for looking and bidding.
Precision Lathe Sales/Advertising Catalog 1937 South Bend Bushings
Lot of Lathe stuff. Brochures.
9" & 10K SOUTH BEND LATHE GEAR COVER HINGE BRACKET AS147NK
9" 10K SOUTH BEND LATHE GEAR COVER HINGE BRACKET PART NUMBER AS147NK. BRACKET IS IN GOOD CONDITION AND INCLUDES BOTH LOCKING SCREWS.
MT2 BULL NOSE PRECISION CENTER LATHE MACHINIST TOOL ATLAS CRAFTSMAN SOUTH BEND
MT2 BULL NOSE CENTER The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
ORIGINAL ATLAS CRAFTSMAN 10 12 MT2 LIVE CENTER LATHE MACHINIST TOOL SOUTH BEND
ORIGINAL ATLAS 10/12 In. LATHE MT2 LIVE CENTER The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
VERY NICE CAST IRON SOUTH BEND 9" 10K LATHE GEAR BOX BANJO SAFETY GUARD
Very Nice- Original cast iron gear box guard for a South Bend 9" or 10K lathe. Guard is stamped with South Bend part number 9W-146B. Mounting screws are also included. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-14b17e57f23-0x10b-
LOT OF 2 LATHE DOGS 4 ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE 1" & 3/8"
Lot of 2 Lathe Dogs for an Atlas. Craftsman, Logan or South Bend Metal Lathe. Dog sizes are 1" and 3/8" One is marked with"VULCAN NO 1 3/8" If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-14b17e57f2d-0x101-
HOW TO RUN A LATHE BY SOUTH BEND LATHE WORKS 39TH EDITION CARE & OPERATING
HOW TO RUN A LATHE. The Care And Operation Of A Screw Cutting Lathe 39th Edition Copyright 1940 by South Bend Lathe Works. All pages are clear, legible and has little writing in it. All pages are accounted for. This came from a Libary but has been discarded. If you plan on purchasing multiple items I would be glad to combine shipping. Please do not pay until I send an invoice with correct combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Super Nice Back Gear South Bend 9" Lathe
Great back gear for a 9" south bend lathe. Gears are nice and square with no chipping. See pics. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-14b23fa82f7-0x10e-
1956 South Bend's Classic "How to Run a Lathe" 54th edition
DETAILED DESCRIPTION: Here is an original copy of the classic South Bend book"How to Run a Lathe" Which is probably the best guide to care and operation of a metal lathe. This was printed in 1956 and is the 54th edition of the book. Book is soft cover, bound in signatures(like hardcover books used to be) measures approximately 5-1/4 X 8 inches and has 128 pages. It is in good overall condition. Complete, no tears, good binding, has some soiling from use in a shop. I offer an unconditional money-back guarantee. If you don't like your item just send it back and I will refund. I ship next business day or same business day. I upload tracking numbers to eBay and Paypal as soon as I ship. Everything is packed very securely in clean new boxes with new packing material. On items without free shipping and items sent outside the US- you ... moreare paying actual postage costs only. I do not pad the shipping price. All paper items are also boxed in corrugated rigid board mailers. Everything is sent with Delivery Confirmation(where available) Signature confirmation is used on anything over $250.00. I only ship to your Paypal address. If you want something sent elsewhere add that address to Paypal and select it BEFORE you pay. INTERNATIONAL BUYERS: I will not mark International shipments as'gifts' I will not lie on customs forms. INTERNATIONAL BUYERS: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. ST-20150125-Flat08. Powered by SixBit's eCommerce Solution
HOW TO RUN A LATHE GUIDE BOOK SOUTH BEND LATHE WORKS 1947
Used book cover shows wears. Volume 1. Edition 45
1937 South Bend Lathes model streamlined Lathe Catalog 96 72pgs
this vintage 1937 catalog from South Bend Lathes is in great shape and complete.has 3 holes punched for placement in a binder) 72 pages of great info and photos.please message with any questions prior to bidding. shipping and payment thru paypal and by buyer. thanks
Gusher coolant pump south bend lathe
Good used condition. 3 phase, Check out the photos! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-14b30e51283-0x106-
south bend lathe CL145b 13" 5' bed anilam wizard lathe series readout
This lathe is 3 phase or single phase with converter box which is included. it has quick change tool post(aloris I think) 3 jaw chuck included, Anilam wizard lathe series digital xy axis readout that works super. It has a 5' bed with 13" swing, has power feed on both x and y. quick change gear box for threading. Lathe has 1 1/2" through hole, I am not the world expert on lathes but will try to send photos or answer any questions. I have the lathe hooked up to single phase and operating now with everything working. I may be able to deliver for a fee. has collet set in photo.
South Bend 10K LIGHT 10 LATHE COUNTERSHAFT COVER GUARD
You are bidding on a very nice late 70s vintage Southbend lathe Motor counter shaft safety guard. This is from a 10k or light 10 lathe. It will not work for a Heavy 10, but might also work on a 9" My buy it now price is an average of SOLD prices from past auctions. Please see my other auctions for more South Bend Lathe parts. US bidders Only
Vintage 1938 34th Edition South Bend Lathe Works How To Run A Lathe Old Industry
I try to deal with all old items and list all the items to the best of my knowledge please look at all the photos and ask any questions before bidding. Keep looking at my listings you never know what vintage items I will be listing next. I will combined shipping. Thank you for looking!
1930's South Bend Lathe Machine Tools Vintage Catalog No.33 -D Metal Machining
1940's 21 page plus covers. South Bend Lathe Works catalog. Good condition. Very minor wear. Shipping charges include INSURED delivery to your door. All sales are final.returns accepted only in the event of a substantial error in the listing. I appreciate your business and do my best to make it a good experience for us both! PLEASE look at the pictures carefully. They are part of the description. PLEASE ask it if you have a question. Powered by
J.H. Williams #31-L Lathe Tool Holder W/Cobalt Blade Aloris Logan South Bend
J.H. Williams#31-L Lathe Tool Holder 3/4" x 1/2" Shank Approx. 4-3/4" Long W/Cobalt Blade The shank has been milled down to accommodate an Aloris Tool holder As seen in pictures. I guarantee all my sales. If I have missed something or the item is not as I described. Let me know within 5 days after you receive it and send it back to me in the same condition you received it for a full refund. I AM LISTING A LARGE AMOUNT OF TOOLING THIS WEEK AT 99 cents AND WILL ALWAYS COMBINE LOTS FOR THE BEST FLAT RATE SHIPPING VALUE. I really appreciate your bids.
Armstrong No. 2020-R Lathe Tool Holder W/Blade Atlas Craftsman Logan South Bend
A rmstrong No. 2020-R Lathe Tool Holder Good/ Very Good Used Condition 3/4" x 3/8" Shank Approx. 4-3/4" Long With Carbide tip Blade As seen in pictures. I guarantee all my sales. If I have missed something or the item is not as I described. Let me know within 5 days after you receive it and send it back to me in the same condition you received it for a full refund. I AM LISTING A LARGE AMOUNT OF TOOLING THIS WEEK AT 99 cents AND WILL ALWAYS COMBINE LOTS FOR THE BEST FLAT RATE SHIPPING VALUE. I really appreciate your bids. 16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-14b30fd173e-0x102-
9" south bend lathe stady rest
a real nice steady rest for a 9" south bend lathe
JACOBS COLLET CHUCK ATLAS SOUTH BEND LOGAN CRAFTSMAN CLAUSING LATHE WITH COLLETS
JACOBS MODEL 96- F1 COLLET CHUCK 3 SETS OF RUBBER FLEX COLLETS MOUNTED TO A 1.5 X 8 SPINDLE MOUNT INCLUDES 2.50 X 8 AS WELL COMBINED SHIPPING IS ALWAYS WELCOME PLEASE SEE MY OTHER ITEMS THANK YOU
VINTAGE 6-1/2" FACE PLATE 1-1/2" x 8 TPI ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE
This item is a vintage 6-1/2" Face Plate for Atlas. Craftsman, South Bend, or Logan Lathe with 1-1/2" X 8 TPI mounting. Its thickness is 1/2" The face plate is in in excellent condition.
VINTAGE 5" FACE PLATE 1-1/2" x 8 TPI ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE
This item is a vintage 5" Face Plate for Atlas. Craftsman, South Bend, or Logan Lathe with 1-1/2" X 8 TPI mounting. Its thickness is 5/8" The face plate is in in excellent condition.
Original South Bend 10K Metal Lathe Reverse Tumbler and Gear Assembly
Original South Bend 10K Metal Lathe Reverse Tumbler and Gear Assembly in excellent working condition the only problem is that it is missing the oil cap This will be shipped USPS within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine. All the items I sell are shipped in a box not a envelope where the item can be damaged during shipping. And I ship within 24 hours I dont just print the label and wait 3 or 4 days to take it to the post office or UPS. As you can see I buy almost as much as I sell on Ebay. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-14b30fd96d3-0x102-
South Bend Lathe 9" A B C 10K Headstock V Belt Pulley and Gear Upgrade
South Bend Lathe 9" A B C 10K Headstock V Belt Pulley and Gear Upgrade in excellent working condition. You get the one you see in the pictures I have a Logan 10" 1821. South Bend 9A and 9C and a 10" Atlas metal lathe that I will be listing parts from this month so if you need anything from one of these lathe message me through ebay and I will list the parts you need. This will be shipped UPS Insured w/ signature required within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine
LATHE TURNING BITS fits SOUTH BEND LOGAN CRAFTSMAN
Lot of Turning Bits for Lathe machines. Most are pre-shaped and most are HSS. But some Carbide tipped comes with the lot. Please check all pixs for more details. Check out my!
LATHE BORING BAR LOT fits SOUTH BEND LOGAN CRAFTSMAN
Lot of Boring bars for Boring on Lathe machines. 3/8"5/8" and 3/4" with holder. Including a Grinder Dresseer. Please check all pixs for more details. Check out my!
BUCK LOGAN 6" THREE SELF-CENTER LATHE CHUCK 1 1/2"-8 SOUTH BEND LOGAN CRAFTSMAN
Buck Logan Lathe Chuck. Model T950/430 Size 6" Jaws Three Fits lathes with 1 1/2"8 threads. Chuck is in great condition with normal surface rust of being Unused for a while. Please check all pixs for more details. Check out my!
SOUTH BEND LATHE LIVE CENTER HANDLES SCREW SWITCH ETC for PARTS ONLY
South Bend 9/10 Lathe Parts. These are tools and parts for South Bend 9" or 10" lathes. Even some ARE complete and in good working condition they all are listed FOR PARTS ONLY Please check all pixs for more details. Check out my!
South Bend Model A 9" lathe 10K Lead Screw Support Bracket. Good Shape
Good shape. The babbit is still in good shape. This SB lathe was used as a wood lathe. Please look at all the pic's as they are part of the description. If you have any questions please ask! Winning bidder has 3 days after end of auction to pay other wise item will be relisted if more time is needed please message me. I only ship to the lower 48 states in the U.S.A. Thanks and happy bidding!
South Bend 13 or 16 lathe Lead Screw Support
This is a lead screw bracket that I htink is from a south bend lathe. I dont know what size. Powered by The free listing tool. List your items fast and easy and manage your active items.
South bend lathe 9" or 10" apron/carraige worm gear
South bend 9" or 10" lathe apron/ carriage worm gear,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-14b34099823-0x10f-
South Bend Lathe Compound Base Fits 9" or 10" Lathe
South Bend Lathe Compound Base Fits 9" or 10" Lathe Overall measurements: 1 3/4" L x 11 3/8" W x 2" H 6 3/8" center V to center V Slide area measures 2" wide
8 1/8" X 5/8" BORING BAR ATLAS SOUTH BEND CRAFTSMAN LOGAN RIVETT CLAUSING LATHE
8 1/8" X 5/8" BORING BAR THE NONE CUTTING END IS A LITTLE JAGGED BUT THAT SHOULD NOT INTERFERE WITH IT'S OPERATION. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK ... moreAND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
3/4" VULCAN DOG ATLAS SOUTH BEND CRAFTSMAN LOGAN METAL LATHE
3/4" VULCAN DOG ATLAS SOUTH BEND CRAFTSMAN LOGAN METAL LATHE LEG IS 3" TOP TO BOTTOM EXCELLENT CONDITION IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH ... moreCONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
BACK PLATE FOR ?? LATHE CHUCK MT 2 TYPE ARBOR SOUTH BEND ATLAS CRAFTSMAN LOGAN
BACK PLATE FOR? LATHE CHUCK MT 2 TYPE ARBOR. OUTSIDE DIAMETER 2 3/4" INNER CIRCLE IS 1 13/16" 4 BOLT HOLES CENTER TO CENTER DISTANCE OF THE BOLT HOLES ACROSS THE CENTER OF THE 2 1/4" 1/4" BOLT HOLES IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK ... moreWITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
9/16" BORING BAR 7 1/4" LENGTH CRAFTSMAN SOUTH BEND ATLAS LOGAN RIVETT LATHE
9/16" BORING BAR 7 1/4" LENGTH BAR HOLDS 1/4" BITS WITH A 1/4" BIT IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE ... moreSHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
3/4" USED LATHE DOG ATLAS SOUTH BEND CRAFTSMAN LOGAN CLAUSING LATHE
3/4" USED LATHE DOG LEG IS 2 1/4" PLEASE SEE THE PICTURES THE DOG IS IN ROUGH CONDITION ON THE ONE SIDE. IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH ... moreCONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE OF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-14b3409977e-0x107-
ORIGINAL ARMSTRONG 3/8" WRENCH SOUTH BEND ATLAS CRAFTSMAN LOGAN RIVETT LATHE
ORIGINAL ARMSTRONG 3/8" WRENCH IF YOU WOULD LIKE DIFFERENT PIC'S JUST ASK. IF YOU HAVE ANY QUESTIONS JUST ASK. I WILL NEED YOUR E-MAIL ADDRESS TO SEED YOU PIC'S. SAME DAY OR NEXT DAY SHIPPING ON THIS ITEM! PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS THANKS FOR LOOKING PAYMENT IS DUE IN THREE DAYS I look forward to a positive transaction. And leaving/receiving positive feedback at the conclusion of this auction. I will do my best to work with you(the buyer) on any and all issues. PLEASE CONTACT ME with any questions, if you would like additional pictures, and before leaving negative feedback. My feedback is important to me and I WORK WITH YOU towards a positive purchase. Thank you. And happy bidding. PLEASE READ MY FEEDBACK AND BID WITH CONFIDENCE. I WILL COMBINE SHIPPING WHEN POSSIBLE. IF YOU PURCHASE MORE THAN ONE ... moreOF MY ITEMS PLEASE GIVE ME A HEADS UP EBAY DOESN'T ALWAYS SHOW IT. NOTE I TRY TO SHIP MY SATURDAY& SUNDAY AUCTIONS ON MONDAY IF I RECEIVE YOUR PAYMENT. THANKS IN ADVANCE FOR YOUR BUSINESS NJ RESIDENTS ARE CHARGED 7% SALES TAX. I DO SHIP INTERNATIONALLY I HAVE MANY PARTS FOR AN ATLAS/ CRAFTSMAN 6" 10" LATHE. I HAVEN'T HAD TIME TO POST THEM.IF YOU NEED SOMETHING AND DON'T SEE IT POSTED PLEASE ASK ME. I ALSO HAVE MANY PARTS FOR A 9" SOUTH BEND LATHE. I HAVEN'T HAD TIME TO POST THEM. DROP ME AN E-MAIL WITH WHAT YOUR LOOKING FOR. PLEASE VIEW MY NEW EBAY STORE FOR ALL OF MY LISTED ITEMS
MACHINIST TOOLS LATHE MILL 7 1/4" 1 1/2" - 8 TPI Face Plate for South Bend
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined shipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY ... moreCUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.
NICE ORIGINAL SOUTH BEND 9" 10K METAL LATHE HEADSTOCK SPINDLE MODEL A B C
Really nice used spindle and take up nut from a 10k lathe. Should also fit the 9" lathe. See my other items for more South Bend lathe parts and tooling. I am happy to combine shipping.
Original South Bend Heavy 9 Lathe Wide Forward Reverse Tumbler Handle and Gears
Original South Bend Heavy 9 Wide Bed Forward Reverse Tumbler Handle and Gears in excellent condition just greasy. This will not fit a 9a through c or a 10k it is off a wide bed heavy 9 lathe from 1937 model number 409rn which is similar to the heavy 10. You get everything you see in the pictures minus what they are sitting on and if you need anything else for this model lathe message me since I have the whole lathe but the bed is bad. This will be shipped UPS insured within 24 hours of receiving cleared payment not including weekends or local pickup is available and on the larger items required.
Original South Bend Lathe Heavy 10 L 13 Step Chuck Collet Closer 2 1/4 X 8 tpi 3
Original South Bend Lathe Heavy 10 L 13 Step Chuck Collet Closer 2 1/4 X 8 tpi Outside Dia. 5 1/2" still has part of the original south bend sticker I have a complete Heavy 10L that I will be breaking up in the next week so if you need anything message me and I will list it(including a taper attachment and collet closer) Also a 10K and 9A. This will be shipped USPS insured within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine but please wait for me to invoice you before you pay since ebay charges 10% on shipping fees and I will be on the phone for hours with them getting them to combine the shipping for me which they dont like to do since they lose money.
Aloris BXA turning and facing holder,south bend lathe
Aloris BXA turning and facing holder `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-14b369dc1b8-0x107-
Armstrong 1-S Lathe Turning Tool Holder 5/16" Bits Atlas Craftsman South Bend
Armstrong No.1-S Straight Lathe Turning Tool Holder in excellent working condition. 1 1/8" X 1/2" X 6" long and takes 5/16" bits This will be shipped USPS within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine but wait for updated invoice before you pay.
Armstrong 0-R Lathe Turning Tool Holder 1/4" Bits Atlas Craftsman South Bend #
Armstrong No.0-R Right Lathe Turning Tool Holder in excellent working condition. 7/8" X 3/8" X 5 1/4" long and takes 1/4" bits. Take a look at the pictures as this will be the one you get and is part of the description. This will be shipped USPS within 24 hours of receiving cleared payment not including weekends or local pickup is available and I also combine shipping when you win multiple Items of mine but wait for updated invoice before you pay.
South Bend Lathe Works Ctr. Drill Holder
See images for all info.
Jacobs collet set off 16" south bend metal lathe machinist blacksmith
Collet chuck set in excellent condition
SOUTH BEND LATHE SPINDLE THREAD PROTECTOR 1-1/2-8 9/10k lathe atlas craftsman
1-1/2"8 spindle thread protector nut for a South Bend lathe. Should fit any lathe with same thread. No reserve. See my other items. I am always happy to combine shipping. 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-14b3926bf5c-0x106-
DUNMORE TYPE/STYLE TOOL POST GRINDER SOUTH BEND ATLAS LATHE MACHINIST TOOL
TOOL POST GRINDER The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Jacobs Headstock Chuck-No.34/Cap.0-1/2"atlas/south bend/logan/lathe/spindle
For Bid/Sale: Vintage Tool- A Jacobs Headstock Drill/Chuck-No.34-Cap.0-1/2" Made in U.S.A. Harford. Conn.It may fit these other brands?atlas/south bend/Logan/lathe/spindle Please. See P ictures for More details) International& US Buyers pays/prepays all postage/handling/taxes/charges due. Feel free to ask any questions before bidding. Thanks for looking and/or bidding.
Tail Stock Assembly for 13" South Bend Lathe.
Tail Stock Assembly for 13" South Bend Lathe 3MT taper bore. Clean, clear scale on spindle, minor thread wear and backlash, operates very smoothly, original clamp, bolt, nut and washer. No international. Ask questions before bidding, always happy to combine shipping when possible.
South Bend Micrometer Carriage Stop for Lathe,South Bend,Logan,Enco,Sheldon,etc.
South Bend Micrometer Carriage Stop for Lathe Part#MCS102-RA. Cat. CL968-T for 13" South Bend Lathe. 050" Adjustment per micrometer rotation in.001" increments, some nicks and dings, operates very smoothly. Was in use on 13" South Bend and will probably fit other similarly sized lathes. No international. Ask questions before bidding, always happy to combine shipping when possible. 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-14b392704a3-0x106-
Enco Turret Tool Post for Lathe, South Bend,Logan,Enco,Sheldon,etc.
Enco#2520 Turret Tool Post for Lathe 3 1/2" x 3 1/2" Main body. 5/8" tool slots, bottom of tool slot to bottom of base is 11/16" with a 9/16" thick riser block, 3 3/4" x 1 1/4" x 3/8" shop built base block, was in use on 13" South Bend, can be fitted to others of similar size. No international. Ask questions before bidding, always happy to combine shipping when possible.
6" Six Jaw Buck Scroll Chuck for Lathe, South Bend,Logan,Enco,Sheldon,etc.
6" Six Jaw Buck Adjust-Tru Scroll Chuck for Lathe 2 1/4" x 8TPI backplate. Jaws are in good condition. When I got this chuck it had a good amount of rust. There is some light pitting here and there, including a little internal. It cleaned up nicely and operates smoothly, will need to be reset to minimum run-out due to complete disassembly. One set of jaws only, no key. No international. Ask questions before bidding, always happy to combine shipping when possible.
ARMSTRONG 83-671 KNURLING TOOL SOUTH BEND ATLAS CRAFTSMAN LATHE 3/4 x 5/16 SHANK
Very Nice- Original Armstrong knurling tool. Stamped"83-671 ARMSTRONG KNURLING TOOL" on one side and"ARMSTRONG CHICAGO U.S.A. on the other. Shank is 2 3/4" long. 3/4" high and 5/16" thick. In fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
6" Unmarked CHUCK 4 JAW ATLAS, LOGAN, SOUTH BEND? Metal LATHE Buck? Skinner?
6" Unmarked CHUCK 4 JAW ATLAS. LOGAN, SOUTH BEND? Metal LATHE Used in working condition. Do not see a maker name. May be Buck? or skinner? 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-14b39286464-0x117-
Metal Lathe Follower Rest Traveling Steady Rest + Steady Rest Atlas?South Bend?
Metal Lathe Follower Rest Traveling Steady Rest + Steady Rest Atlas?South Bend? We do not know what lathe this works with. See all photo's some have measurements. The bottom edge shows damage on the normal steady rest one with 4 1/2" hole.
Original South Bend 9" Lathe Headstock Bull Quill and Safety Gear Guards 1936
Up for auction a set of headstock guards off of our South Bend 9 1936 Lathe. These are cast iron. Still need some cleaning great useable shape. Please check to be sure this will work for ya. We think that is it. Oh yeah, we describe it as much as possible. Anything above and beyond, please research. Good prices do not include answering/researching whether or not our ogle for sale will fit yer boggle. What else can be said? This is a No Reserve auction. Thanks for looking and Good Luck Sold AS IS. Please look closely at pictures. No broken hearts! Item photos almost ALWAYS portray the item nicer than it is…we always try to photograph an item with its worst attributes showing…please keep this in mind when bidding.Should you have a question please ask! INSTANT FEEDBACK! WoW* that's right, We give instant feedback after payment is received, ... moreand your item is shipped. Why shouldn't we? You kept your end of the deal! g7* doesn't hold your feedback hostage! Disclaimer: We have described the item as accurately as possible, examining carefully for obvious defects. We will only give specifics if we are sure of the information. It may not be possible to find every defect in every item, therefore buyer agrees to purchase"as is. OUR SHIPPING CHARGES INCLUDE HANDLING. BY AGREEING TO PURCHASE THIS ITEM YOU AGREE TO THE SHIPPING AND HANDLING COSTS AS LISTED. We try our best to ship via United States Postal Service. USPS and get it to you as soon as we can. Delivery confirmation is included. This let’s us know your item was delivered to the address sent us. We now have to charge more for shipping due to Ebay charging an extra 10% final value fee on shipping. Should you wish another method of shipping and or tracking please feel free to let us know, shipping will be adjusted accordingly. Item will be shipped with NO insurance unless you request it. Simply add $1.30 for up to $50.00 or $2.20 per 100 for up to $100.00 to the final pay notice price. We try our best to package items for the worst-case scenario. We s
Vintage 1940's South Bend Lathe Brochure.
You are bidding on a 1940's South Bend lathe Brochure. I could not find a date but this brochure came out of a box where everything was from 1943 to 1947. I am fairly certain this is the same vintage. Folded the brochure measures 9 and 1/4 inches by 6 and 1/8 inches. unfolded it measures 24 and 3/8 inches by 18 and 1/2 inches. The fold out could be framed. Backside shows seven different lathes from 9 inch to 16 inch. The brochure was sealed with a South Bend sticker. It is in very good condition. I combine shipping on multiple purchases.
CL126T1 STEADY REST SOUTH BEND 13" LATHE NICE CONDITION
CL126T1 STEADY REST SOUTH BEND 13" LATHE IN NICE CONDITION
ORIGINAL 5" CUSHMAN 3 JAW CHUCK for Atlas Craftsman South Bend Logn lathe
ORIGINAL 5" CUSHMAN 3 JAW CHUCK for Atlas Craftsman South Bend Logn lathe! Used chuck off a 10" Logan Lathe! Could used a good cleaning. Is a functioning chuck and looks to run true. Has been used quite a bit! Please refer to photos for condition. South Bend back plate. 1-1/2"x8 TPI. Please ask questions! I ship ASAP via USPS or FedEx! Please check out our store. I have many more Logan Parts available.
5" Diameter Chuck Mounting Back Plate South Bend Metal Lathe, 1-1/2" Threads
5" Diameter Chuck Mounting Back Plate South Bend? Metal Lathe. 1-1/2" Threads May fit other lathes. In good condition. 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-14b3ba8031e-0x104-
Lantern style Tool Post Holder for Lathe South bend for 13-16" swing
Offered is a used large lantern style rocker tool post. It will fit a 13-16" south bend lathe. Or any other Lathe of similar size. The t slot plate is 2" square and 3/8" thick. It has some dings on it from use. The tool holder slot will accommodate 1/2" wide tool holders.
5"CHUCK SELF CENTERING 3 JAW ATLAS LOGAN SOUTH BEND Metal LATHE Bison Skinner?
5" CHUCK SELF CENTERING 3 JAW ATLAS? LOGAN?SOUTH BEND? LATH? 3 Jaw Chuck Self Centering. Scrolling Jaws Measures 5" Diameter x 2-1/4" Thickness 1" back shaft threads.will need new 1" double female thread coupling. In good working condition. Do not see a maker name. May be Buck? or skinner?
South Bend Heavy 10 precision metal lathe on cabinet 10"x30" very well tooled
CREDIT CARD PAYMENT OVER THE PHONE OR PAYMENT IN PERSON AT TIME OF PICK UP ARE THE ONLY FORMS OF PAYMENT ACCEPTED ON THIS ITEM. THAT IS OUR POLICY ON ITEMS OVER $500. REPEAT. PAYPAL PAYMENT WILL NOT BE ACCEPTED ON THIS ITEM! Selling a nice South bend Heavy 10 precision metal lathe. It has 30" center to center. Included with the machine is a 3 jaw chuck(no backing plate) A quick acting 4 way tool post, 2 lantern style tool posts, drill chuck for tailstock, center for tailstock, South Bend quick acting collet closer with approximately 30 collets, micrometer stop for carriage, thread chasing dial, chuck wrench, carriage lock for threading. Mounted on nice South Bend stand with drawers. Currently set up to run off of 220 volt three phase current. Machine is in good condition. Motor runs very smooth. WE HAVE A FORKLIFT HERE TO LOAD IT ONTO ... moreA TRUCK OR TRAILER. FEEL FREE TO CALL US AT ANY TIME WITH QUESTIONS. OR COME TO OUR FACILITY AND INSPECT UNDER POWER. WE WILL BE GLAD TO DO WHAT WE CAN TO ASSIST. 717)926 3975. PLEASE EMAIL OR CALL US FOR A SHIPPING QUOTE. SHIPPING TO A COMMERCIAL LOCATION IN THE CONTINENTAL US SHOULD BE BETWEEN 200-400 DOLLARS. BUT YOU MUST CONTACT US IF YOU NEED AN EXACT PRICE. LOCAL PICK UP IS MORE THAN WELCOME, BUT IF PICKED UP LOCALLY, A 6% PA SALES TAX WILL APPLY. CREDIT CARD IS THE ONLY METHOD OF PAYMENT. WE CAN TAKE A CREDIT CARD OVER THE PHONE. PLEASE FEEL FREE TO CALL US AT 717-926-3975. THANKS, CENTRAL PENN MACHINERY
South Bend Logan Turret Lathe Tailstock Large Threading Die Holder
1" shank. Has 1/2" bore, holds 2-1/2" thread dies no makers name, Comes as shown. ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-14b3ddc7e55-0x10f-
Idler Gear Bolt, Nut and Bushing for13" South Bend Lathe
Idler Gear Bolt. Nut and Bushing for 13" South Bend Lathe Bolt is 3" long with 7/8" x 7/8" x 3/8" head. Bushing is 3/4" OD and 1/2" ID, minor wear, will also fit other South Bend lathes. No international. Ask questions before bidding, always happy to combine shipping when possible. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-14b3e23693b-0x106-
64T Change Gear for13" South Bend Lathe
64T Change Gear for 13" South Bend Lathe 5/8" Keyed bore. 5/8" face width, 14DP, minor wear, no broken or missing teeth, will also fit other South Bend lathes. No international. Ask questions before bidding, always happy to combine shipping when possible.
48T Change Gear for13" South Bend Lathe
48T Change Gear for 13" South Bend Lathe 5/8" Keyed bore. 5/8" face width, 14DP, minor wear, no broken or missing teeth, will also fit other South Bend lathes. No international. Ask questions before bidding, always happy to combine shipping when possible.
80T Idler Gear for13" South Bend Lathe
80T Idler Gear for 13" South Bend Lathe 3/4" Smooth bore. 5/8" face width, 14DP, no broken or missing teeth, minor wear, will also fit other South Bend lathes. No international. Ask questions before bidding, always happy to combine shipping when possible.
Change Gear Banjo Bracket for13" South Bend Lathe
Change Gear Banjo Bracket Casting#630T2 for 13" South Bend Lathe 12" Overall length. 3 1/2" bore, 9/16" x 5 1/2" T-bolt slot, no cracks or repairs. No international. Ask questions before bidding, always happy to combine shipping when possible.
Compound Rest Assembly for13" South Bend Lathe
Compound Rest Assembly for 13" South Bend Lathe Standard 1 1/4" dial. Minor slide wear, minor screw and nut wear, gradation dial is nicked and scratched but totally legible, nice clean clear lower scale, excellent T-slot, dove tail bottom is 2 1/4" No international. Ask questions before bidding, always happy to combine shipping when possible.
Vintage No.2010-L Ace Lathe Turning Tool Holder Atlas South Bend
Armstrong Brothers Ace Lathe Turning Tool Holder
South bend lathe 9" belt tension linkage
This is the belt tension linkage for the 9" south bend lathes. This will fit models A B and C. This comes with a very nice shop made turnbuckle and it works perfect. No shipping to Canada sorry. I will combine multiple purchases to save on shipping. Good luck and Happy bidding!
PUTNAM DIAMOND AntiqueVINTAGE WOOD Metal lathe LATE 1800s ROCKWELL SOUTH BEND
The overall length of the bed is 38 inches The chuck is 3 inches in diameter And from the center of the chuck to the top of the bed is 3 1/2 inches All pieces move freely with no slop The diamond brand compound cross slide turns very smoothly and seems to be an excellent condition I checked with a machinist that I know and he said late 1800s maybe early 1900s he thought for sure it was well over 100 years old truly an antique Within nice Brass nameplates and the old legs and feet this would just be a beautiful piece re stored Just the tip of one of the feet is chipped as shown in the last photograph and easy fix Outside of that all the cast iron seems to be perfectly fine no cracks that I have seen Please allow three to four days for me to ship because the pending on where it goes that will determine how I box it up If out of the continental ... more48 states please contact me about shipping Just shipped one lathe to Puerto Rico and the shipping wasn't too bad We'll ship worldwide however because of the weight it could get quite expensive Also if shipping two PO box contact me because I can not use FedEx and will have to check the prices on other options most of the time not a problem If you can pick up naturally there will be no postage Money back if not happy for any reason buyer to pay return postage Any questions please ask thank you very much 16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-14b3fa23ea7-0x105-
South Bend 9" lathe headstock gear guards shields with bull gear pin cover later
Up for auction a set of South Bend 9" lathe headstock gear guards shields with bull gear pin cover later aluminum style. Screw holes in top of guard for electrical South Bend switch(not included) The blue is layout blue we used when fitting it to our lathe, did have to modify a hole to fit. Will need some cleaning good useable shape. Took lots of photos. Please check to be sure this will work for ya. We think that is it. Oh yeah, we describe it as much as possible. Anything above and beyond, please research. Good prices do not include answering/researching whether or not our ogle for sale will fit yer boggle. What else can be said? This is a No Reserve auction. Thanks for looking and Good Luck Sold AS IS. Please look closely at pictures. No broken hearts! Item photos almost ALWAYS portray the item nicer than it is…we always try to photograph ... morean item with its worst attributes showing…please keep this in mind when bidding.Should you have a question please ask! INSTANT FEEDBACK! WoW* that's right, We give instant feedback after payment is received, and your item is shipped. Why shouldn't we? You kept your end of the deal! g7* doesn't hold your feedback hostage! Disclaimer: We have described the item as accurately as possible, examining carefully for obvious defects. We will only give specifics if we are sure of the information. It may not be possible to find every defect in every item, therefore buyer agrees to purchase"as is. OUR SHIPPING CHARGES INCLUDE HANDLING. BY AGREEING TO PURCHASE THIS ITEM YOU AGREE TO THE SHIPPING AND HANDLING COSTS AS LISTED. We try our best to ship via United States Postal Service. USPS and get it to you as soon as we can. Delivery confirmation is included. This let’s us know your item was delivered to the address sent us. We now have to charge more for shipping due to Ebay charging an extra 10% final value fee on shipping. Should you wish another method of shipping and or tracking please feel free to let us know, shipping will be adjusted accordingly. Item will be
MACHINIST BENCH LAMP LIGHT SWING ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE
MACHINIST LAMP 38" OVERALL LENGTH The photos are accurate to each description and exact to what you will receive. Please feel free to email with any questions! Money back guarantee
South Bend "Workbench 9" metal lathe
This little South Bend lathe is missing the back gear assembly and the motor drive pulley assembly. It sat for a long time in an unheated porch. That is the bad news. It isn't as rusty as it looks in the photos. This should be soaked in diesel oil for a week. Disassembled, cleaned in detail, and put back together. The ways are excellent as are the other important parts. I have a tailstock for it. The back gear and drive parts show up on eBay often. Nice worthwhile project for some body wanting a small lathe. Could be used for a lot of projects without a back gear. I will help load or get it ready for shipment.
5" Cushman 3 Jaw Scroll Chuck for Lathe,South Bend,Logan,Atlas,Sheldon,Enco
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Offered is a nice 5" Cushman lathe chuck.With both sets of jaws and key. There is light surface rust from sitting around. The large size jaws look unused. It has a 1 1/2" 8 threaded back. ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-14b41a8a98d-0x104-