In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
54.90
Buy It Now
$5.59 Shipping
Condition: New
Location: Delphi, United States
South Bend 9"/10k Thread Chasing Dial. Our version of the South Bend 9"/10k thread chasing dial. The dial and the gear can be removed via grub screw allowing ... morefor clocking your dial, cleaning and lube if ever needed.
$
399.99
Buy It Now
Condition: Used
Location: Middlebury, United States
Will there be a dock or forklift. Has A Slight Bend In The Rod (See Pics). Weight (lbs, oz): 150. Size: Length: 36 in. Width: 26 in. Height: 7 in. Unless ... moreotherwise specifically agreed to in writing by.
$
139.99
Buy It Now
$18.00 Shipping
Condition: Used
Location: Medina, United States
South bend 9" screw and dial.
$
45.95
Buy It Now
$12.45 Shipping
Condition: New
Location: Mentor, United States
Had a bunch of double start left hand threads to cut so I needed a stop for my Clausing. I have one set up to use on the Clausing but the others are all ... moreun drilled (For the cross slide adjusting stud) They are all ready for you to set up for your own machine.
$
89.99
Buy It Now
$24.50 Shipping
Condition: New
Location: Berrien Springs, United States
$
1650.00
Buy It Now
Condition: Used
Location: Hamilton, United States
SOUTH BEND. Swing: 9" Bed Length: 4.5' Type: R Drive: SFG. Centers 24". Equipped With.
$
599.00
4d 5h 21m 51s
0 bids
$22.00 Shipping
Condition: Used
Location: Thomaston, United States
South Bend Lathe No. 130 Follower Rest No. 125 Center RestNo. 67 Threading StopAll have been used but in immaculate condition, I have cleaned them to ... morebare metal and applied a coat of primer to protect them. Photos show condition of metal underneath. These were used by a family friend but not abused. Will have more items from a 25-Y posted shortly but making sure the lathe and parts get the care they deserve while dissembling and restoring. Please do not hesitate to reach out for more questions or pictures.
$
89.95
Buy It Now
$6.80 Shipping
Condition: Used
Location: North Tonawanda, United States
It doesn’t affect the accuracy. There is a couple of options. (Preferred & cheapest).
$
119.95
Buy It Now
Free Shipping
Condition: New
Location: Durham, United States
If you are contemplating cleaning up that old South Bend sitting in the garage, this is what you will need to get the job done. The 106 page professionally ... morepublished instruction manual included with this kit is fully illustrated with almost 250 photographs plus step-by-step instructions and sequences for disassembling, cleaning, reassembling and adjusting the critical components of the lathe.
$
39.95
Buy It Now
Free Shipping
Condition: New
Location: Selma, United States
Suitable for framing.
$
39.95
Buy It Now
Free Shipping
Condition: New
Location: Selma, United States
This is a not a photocopy, but a reproduction of an original Decimal Equivalents Chart by South Bend Lathe. Suitable for framing.
$
65.00
Buy It Now
$13.45 Shipping
Condition: Used
Location: Sicklerville, United States
South Bend 14 1/2"-16" Swing Lathe Cross Slide Stop (NEW).
$
54.95
Buy It Now
$59.82 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. Words cannot express how grateful we are for your business no matter how big or small ... moreyour contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
59.00
Buy It Now
$12.00 Shipping
Condition: Used
Location: Bristol, United States
1 1/4" id has a key please check your spindle dia
$
219.99
Buy It Now
$19.00 Shipping
Condition: Used
Location: Medina, United States
Original South Bend Lathe Tail Stock for 9 inch lathe. Tail stock in good condition. Good taper. Needs new paint. NO wrench included. Bolt and clamp are ... morein fair condition. Shipping is a flat rate of $10.40 to any of the 50 USA States. I will not ship outside the US 50 States. Payment to be by Pay Pal.
$
193.59
Buy It Now
$18.40 Shipping
Condition: Used
Location: Morris Plains, United States
NO EXCEPTIONS.
$
119.99
Buy It Now
$18.00 Shipping
Condition: Used
Location: Medina, United States
South Bend 9" Metal Lathe Headstock Spindle 1 1/2" x 8 TPI Threads It comes with the woodruff key. The spindle is in fine condition with some ... morewear. See pictures. This spindle is off of a South Bend 9 inch metal lathe. It has 1 1/ 2" x 8 TPI Threads. The inside taper is MT3. The threads are in fine condition. The gear teeth are in good condition with some age wear. See pictures. It is sol d as pictured. See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $13.00 for USPS Priority Mail Shipping with Delivery Confirmation within the United State s. I can combine shipping. International buyers please contact me before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
$
330.00
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
HOLD 2A COLLET. THE SPINDLE IS BEING USED AS A REFERENCE ONLY .
$
30.95
Buy It Now
Free Shipping
Condition: New
Location: South Whitley, United States
South Bend Lathe flat drive belt custom cut export part Important Note: If you do not provide a belt length at time of purchase you will be shipped the ... moredefault length of 70" Use ebay's message system to indicate length. South Bend Lathe flat drive belt custom cut New high performace multi-ply belting Outlasts the original by many years Each belt is custom cut and laced to order You can order up to 70" maximum length by 1" wide
$
39.95
Buy It Now
Free Shipping
Condition: New
Location: Selma, United States
This is a not a photocopy, but a reproduction of an original Principal Parts of a Lathe Chart by South Bend Lathe. Suitable for framing.
$
39.99
Buy It Now
$8.70 Shipping
Condition: Used
Location: Avon, United States
South Bend 9" 10K Lathe Change Gear- 5/8" bore. 64 Tooth. Great condition. No b roken or chipped teeth. Please see my other listings for more ... morelathe parts. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
$
24.95
Buy It Now
Free Shipping
Condition: New
Location: Durham, United States
They are made from the highest grade tempered spring steel, CNC wound and stress relieved to provide long service life. Our capillary oilers cross reference ... moreto the original South Bend part number AS373KH2.
$
98.95
Buy It Now
$9.00 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. Words cannot express how grateful we are for your business no matter how big or small ... moreyour contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
139.99
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
Free shipping to the lower 48 United States United States Postal Service flat rate shipping
$
139.95
Buy It Now
$14.95 Shipping
Condition: Used
Location: Orient, United States
Stay Tuned. These were removed from a 9" Model C Southbend. The A and B models tend to have a tab that the C Models don't have. They also have a ground ... morecutout to clear the power feed. These Model C half nuts will not fit model A or B without modification to allow clearance of the power feed assembly.
$
62.90
Buy It Now
$8.70 Shipping
Condition: Used
Location: North Tonawanda, United States
( depends on your device ). The bottom part that goes into the t slot is bent from over tightening. It will work as it is or can be straightened.
$
45.00
Buy It Now
Free Shipping
Condition: Used
Location: La Habra, United States
NOT SURE EXACTLY WHICH MODEL IT GOES TO HAS BEEN SITTING ON THE SHELF FOR YEARS PLEASE LOOK AT ALL PICTURES FOR FULL DESCRIPTION OF THE ITEM QUESTIONS ... moreOR CONCERNS FEEL FREE TO ASK AND I WOULD DO MY BEST TO ANSWER ANY QUESTIONS FREE SHIPPING TO THE LOWER 48 USPS FLAT RATE SHIPPING
$
115.00
Buy It Now
$8.60 Shipping
Condition: New
Location: Ionia, United States
To use this on a 13"you just have to take the gear off and turn it over. South Bend 13", 14-1/2", 16" or 24" Threading Dial Thread Dial 3D Printed NEW. ... moreGreat looking and functional thread dial at a low price.
$
147.47
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specification: Brand new. Made of steel. Suitable for the lathe with center line height Around 0.5" (The top cross slide tool post Mounting Surface to ... morethe lathe center line). Such as: South Bend 9" & 10" , Atlas 10 & 12", Delta 10, Nardini TT1000 & TT1200 and many other imported lathe. Package Including:.
$
499.99
Buy It Now
Condition: Used
Location: Middlebury, United States
Will there be a dock or forklift. Size: Length: 80 in. Width: 16 in. Height: 17 in. Prefer to pick it up yourself?. To get a freight quote we will need ... moreto know the following We choose the carrier.
$
12.00
Buy It Now
$4.25 Shipping
Condition: Used
Location: Jupiter, United States
UP FOR SALE IS THE FORWARD REVERSE TUMBLER RETAINER CLAMP FOR A SOUTH BEND LATHE 9" JUNIOR OR 9" MODEL O. IT IS IN EXCELLENT CONDITION. YOU WILL GET THE ... morePART JUST LIKE YOU SEE IT IN THE PICTURE. Double your traffic.
$
9.95
Buy It Now
$6.00 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. Words cannot express how grateful we are for your business no matter how big or small ... moreyour contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
19.99
Buy It Now
Free Shipping
Condition: New – Open box
Location: La Habra, United States
LEATHER DRIVE BELT CLIPS & PIN SOUTH BEND LATHE LOGAN MACHINIST ETC FREE SHIPPI. Free shipping to the lower 48 United States First class mail
$
65.00
Buy It Now
$10.40 Shipping
Condition: New
Location: Berrien Springs, United States
South Bend Lathe 14-1/2" & 16" Cross Slide Screw Feed Nut PT65FH1 for 1940(ish) and newer machines. South Bend Part Number PT65FH1. You are sending money ... moreto them!
$
44.95
Buy It Now
$5.40 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. Words cannot express how grateful we are for your business no matter how big or small ... moreyour contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
300.00
Buy It Now
$50.00 Shipping
Condition: Used
Location: West Berlin, United States
Complete South Bend 9" lathe headstock with covers, countershaft lever, and no broken gears.
$
375.00
17h 16m 41s
0 bids
$94.94 Shipping
Condition: Used
Location: Riverhead, United States
Off my 1944 heavy 10 that was restored 10 years ago and lightly used since. Absolutely no apologies for this unit. No damage and everything works as it ... moreshould. Check my feedback. Please refer to photos and ask questions.
$
50.00
Buy It Now
$10.15 Shipping
Condition: New
Location: Berrien Springs, United States
ATLAS CRAFTSMAN 9-12 INCH LATHE 3C COLLET SET WITH NEW DRAWTUBE+USED ADAPTER Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge ATLAS ... moreCRAFTSMAN 9-12 INCH LATHES 3C COLLET SET WITH 6 USA COLLETS AND ADAPTER WITH NEW USA MADE DRAWTUBE. 1/16. 1/8, 3/16, 5/16, 3/8 AND 7/16 ASS ORTED USA COLLETS. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop I USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-13f2190db89-0xe1-
$
199.99
Buy It Now
$18.00 Shipping
Condition: Used
Location: Medina, United States
Up for sale is this South Bend Heavy 10. 10L cross slide compound base. This includes the gib. This came off a school lathe so it does have some wounds. ... morePlease take a look at my other auctions as I will be listing lots of other South Bend parts. I am parting out 2 late model heavy 10 lathes so if there is something specific you need please ask. If you have any questions feel free to email me. I will combine shipping and I will ship international so please ask. Thank you.
$
209.83
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Feature: Suitable for lathe center height 0.7 - 2.2" (Top compound surface to lathe center line) , such as: South Bend 13" , 14" & 1307 , Delta 14" , ... moreLogan 14" Emco: Elnomat13S , Harrison: 11,12 &13", Sheldon: 11 &13" , Clausing: 1300 series, Monarch: 13 , Nardini: MS1400 MS1600 Acer: 1340 and many other import lathes. Whole set includes one each of: 251-222 Wedge Type Tool Post 250-201 Turning Tool Holder , use tool bit up to 5/8" 250-202 Boring,Turning Tool Holder, use tool bit up to 5/8" and round shank tool bits to1/2".
$
14.99
Buy It Now
$8.74 Shipping
Condition: Used
Location: Cape Neddick, United States
SOUTH BEND HEAVY 10" METAL LATHE QUICK CHANGE BANJO BRACKET The photos are accurate to each description and exact to what you will receive. Please ... morefeel free to email with any questions!
$
283.50
Buy It Now
Free Shipping
Condition: Used
Location: Sterling, United States
Removed from a complete and running 16" South Bend lathe. This quick change gear box is used but in good usable condition and came off a running machine. ... moreIt has some paint scuffing and a few scratches here and there but overall a nice usable gearbox ready to mount and use. Ships free to the CONTINENTAL USA. Buyers outside continental USA please message prior to purchase for shipping quote.
$
75.00
Buy It Now
Free Shipping
Condition: New
Location: Houston, United States
I have been running this upgrade for about 5 years and have had no issues with it. I haven't needed to adjust the take up nut at all.
$
49.99
Buy It Now
$15.95 Shipping
Condition: Used
Location: Panorama City, United States
This is a matching pair of vintage Lathe Bed feet... I believe they are from an early South Bend lathe... I have included the relevant dimensions in the ... morepictures... These will be shipped out fast with USPS!
$
28.95
Buy It Now
$6.00 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
170.00
Buy It Now
Free Shipping
Condition: Used
Location: Hamlin, United States
Very nice condition.
$
1619.00
1d 0h 52m 47s
0 bids
Condition: Used
Location: Port Washington, United States
South Bend Lathe C9W10JR. Built in 1941. 3' long bed, 9" swing over bed. Serial #112673. Excellent condition. Motor was rebuilt a few years ago. Also ... moreincluded are a gallon of spindle oil, way oil and two other necessary oils and their oiling cans.
$
36.50
Buy It Now
$5.40 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. With a household of 8 we cannot express how grateful we are for your business no matter ... morehow big or small your contribution is. THANK YOU
$
53.10
Buy It Now
Free Shipping
Condition: Used
Location: Sterling, United States
Gear removed from a 13" South Bend metal lathe. It is used but in good overall condition with no cracks or broken teeth. This gear is ready to use. Has ... moresome surface corrosion that would easily clean up or be fine used as it is. Ships free anywhere in USA.
$
54.95
Buy It Now
$9.00 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. Words cannot express how grateful we are for your business no matter how big or small ... moreyour contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
44.00
Buy It Now
$6.75 Shipping
Condition: New
Location: Ionia, United States
South Bend 9" Threading Dial Thread Dial 3D Printed NEW. If you need a custom made thread dial for your lathe, let us know as we can produce what you ... moreneed. We can also print parts for any thread dial you need repaired (gears, housings, dials, etc).
$
38.95
Buy It Now
$9.00 Shipping
Condition: Used
Location: North Tonawanda, United States
THIS IS AN ORIGINAL SOUTH BEND LATHE COMPOUND CROSS FEED HANDLE FOR THE 9" AND 10K LATHES. THIS IS THE SWIVEL TYPE BUT IS MISSING THE BUSHING INSIDE ... moreTHE KNOB. OTHERWISE IT IS NICE. GOOD USED CONDITION. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!
$
309.99
Buy It Now
$18.40 Shipping
Condition: New
Location: Berrien Springs, United States
LOTS OF AUCTIONS ONLINE NOW! Brand Unknown Packaging None Condition Excellent Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ... moreebay* This is the sole opinion of tool-in-the-box* 13 1/8" Total Length. 9 13/16" Lenght from Shoulder. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
$
7.85
Buy It Now
$5.35 Shipping
Condition: New
Location: Ionia, United States
These wipers cross reference to the original South Bend part number PT59NK1. Wipers are sold in sets of 4 and are very reasonably priced compared to OEM ... moreor used parts so don’t miss out on a chance to pick up a set for your lathe.
$
14.95
Buy It Now
$6.00 Shipping
Condition: Used
Location: North Tonawanda, United States
Thank you for considering to support our family and small business. Words cannot express how grateful we are for your business no matter how big or small ... moreyour contribution is. THANK YOUI do combine shipping. There is a couple of options. You can…- Add the items to your cart and check out. When I ship (same day) I’ll refund the difference. (Preferred & cheapest)- You can add to your cart and go to checkout. On the payment page you should have the option to either request total or contact buyer. ( depends on your device ). After that I will send an invoice… many times I don’t get the notification so it takes a little longer.
$
315.00
Buy It Now
$30.25 Shipping
Condition: Used
Location: Yelm, United States
This HWC-100k Lathe Collet Closer Drawbar is a great addition to any metalworking equipment. Perfectly designed for South Bend 10k, this drawbar comes ... morewith 6 C Collets that are sure to provide a secure grip on any material. The brand name of the product is South Bend Lathe and the model number is HWC-100k.Apart from its brand and model, this product falls under the categories of Business & Industrial, CNC, Metalworking & Manufacturing, and Metalworking Equipment. With its top-notch quality and easy-to-use features, this drawbar is a must-have tool for anyone who is looking to make precise cuts on their lathe.
$
334.99
Buy It Now
$24.99 Shipping
Condition: Used
Location: New Britain, United States
A very nice quick change gearbox. The paint leaves a bit to be desired. And the label is badly worn, though still readable. There is no visible damage, ... moreand I have run this gearbox without having any difficulties or hearing any noises. This was removed from a 4.5' bed(it says that on the label) And that leadscrew will be offered for sale in future. This gearbox also comes with the leadscrew gear and nuts. As well as the three mounting screws. All these items are shown in separate pictures.
$
100.00
Buy It Now
$5.35 Shipping
Condition: Used
Location: Nashville, United States
$
157.49
Buy It Now
Free Shipping
Condition: Very Good
Location: United States
SOUTH BEND LATHE MAINTENANCE PAMPHLETS: KEEP YOUR LATHE CLEAN, OILING THE LATHE, INSTALLATION AND LEVELING By Charles Philip Crowe *Excellent Condition*.
$
32.00
Buy It Now
Free Shipping
Condition: New
Location: San Lorenzo, United States
South Bend Lathe 9" & 10" Cross Slide Screw Feed Nut AS65NK1. South Bend Part Number AS65NK1. Item 19 in the pictured schematic.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
 In 

Former Listings  
 
WILLIAMS LATHE CUT OFF & SIDE TOOL holder N-31-R W' BLADE logan south bend atlas
WILLIAMS LATHE CUT OFF& SIDE TOOL HOLDER N-31-R DROP FORGED W' CUT OFF BLADE
9" South Bend Lathe with Tooling, Taper Attachment, Chucks, Steady Rest
9 9" South Bend Lathe Serial Number: 55898NKR9 Threading Taper attachment Steady rest Tailstock(3) 3 jaw chucks(2) 4 jaw chucks Extra jaws(2) Face plates Misc. collets and tooling There is an extra lead screw but I'm not sure if it fits this machine Shows some wear. Selling it as is. From a local shop It has a plug on it that is 3 phase. Not sure of the voltage Located in Bridgeport. CT 06607 Free loading Skidding. Crating is extra Will ship lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13ef827368e-0xf4-
SOUTH BEND LATHE 9" HEAD STOCK COVERS
THIS IS A PAIR OF CAST IRON HEAD STOCK COVERS FOR THE 9" SOUTH BEND LATHES. THE LEFT IS DRILLED AND TAPPED FOR THE SWITCH MOUNT AND THE RIGHT HAS A SHOP MADE SWING UP DOOR WHICH IS NICE AND WORKS GREAT. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!
south bend lathe 9" wide bed,south bend junior,steady rest
steady rest from a south bend 480-yn.Will fit wide bed 9" lathes,south bend 9" junior.1 bolt is broken but otherwise in good condition
Drill Bit 33/64 Morse Taper 2 for Machinist South Bend Lathe 9 10 Mill Press CNC
One used USA Drill Bit 33/64. 2MT shank, 5" drill length, 8 1/2" OAL, HSS, 118 degree, I have several more taper shank drills listed and will combine shipping. Item in the picture is the one you will receive. I do combine shipping. Ships to USA only. PayPal only.
Drill Bit 21/32 Morse Taper 2 for Machinist South Bend Lathe 9 10 Mill Press CNC
One used USA Drill Bit 21/32. 2MT shank, 5" drill length, 8 1/2" OAL, HSS, 118 degree, factory grind I have several more taper shank drills listed and will combine shipping. Item in the picture is the one you will receive. I do combine shipping. Ships to USA only. PayPal only. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13ef8e04640-0x109-
Drill Bit 17/32 Morse Taper 2 for Machinist South Bend Lathe 9 10 Mill Press CNC
One used USA Drill Bit 17/32. 2MT shank, 5" drill length, 8 1/2" OAL I have several more taper shank drills listed and will combine shipping. Item in the picture is the one you will receive. I do combine shipping. Ships to USA only. PayPal only.
16" South Bend Lathe motor cover (small) under bed or drip tray
This is the small motor cover under the bed or drip tray which ever you model has. keep that debris out. Posted with
16" south bend lathe base motor cover large (gearside)
Will fit 16" south bend lathes. replace your missing or broke cover and keep debis out of your motor. Posted with jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-13ef8f94a57-0xf3-
South bend lathe 16" base motor door
Off my 16/24 south bend lathe. no cracks knob turns well. good American cast iron. Any questions feel free to ask. Posted with;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13ef8f94a14-0x107-
SOUTH BEND METAL LATHE ORGINAL IN GREAT CONDITION WAR PRODUCTION
I PICKED THIS LATHE UP ABOUT 2 YEARS AGO I HELD ONTO IT BECAUSE OF THE WAR TAG I AM GETTING RID OF ALOT OF MY PERSONNEL STUFF THIS TIME AROUND THIS IS A SOUTH BEND PRECISION TOOL ROOM METAL LATHE UN RESTORED AND 100% WORKING THE BED WAYS SCREW GEARS BEARINGS ARE IN GREAT SHAPE INCLUDES TOOL POST LOTS OF TOOLING 3 JAW 4 JAW FACE PLATE METRIC GEARS FOR THREADING THREAD DIAL LIVE CENTER KEYLESS DRILL CHUCK CATOLOG#644 Y RUN THE SERIAL# REALLY COOL HISTORY ON IT 136077 SEE PICS STATING CONFORMS TO ORDERS OF THE WAR PRODUCTION BOARD LATHE HAS THE PATNED WORM DRIVE WITH FRICTION CLUTCH IN APRON POWER CROSS AND FEED LATHE RUNS ON 110 VOLT READY TO WORK THESE LATHES WERE KNOWN FOR THERE SUPERIOR TOLERANCE AND FINISHES BACK GEARED MACHINE I CAN ARRANGE FREIGHT OR YOU CAN PALLET IS FREE ZIP IS 48307 THESE ARE GETTING HARDED AND HARDER TO FIND THIS ... moreNEEDS TO GO TO SOMEONE WHO APPREACIATES OUR AMERICAN HISTORY IN MFG AS MUCH AS I DO IF YOU HAVE QUESTIONS CALL ME 248 875 2089 THANK YOU PLEASE SEE MY OTHER ITEMS
South Bend 13 inch metal lathe bed, base, legs, and stand
This is a lathe. Bed, legs and stand off a 13 inch South Bend lathe. In good shape, good for parts. Sold as is, pickup only, pay cash at pickup within 15 days of end of auction. I also have several other good 13 inch south bend lathes for sale. The rest of parts off this one, and other accessories that i will be looking to sell, feel free to ask me about anything else. Posted with
VERY NICE SET MT2 CUP CENTER SPUR CENTER LATHE TOOLS LOT 4 SOUTH BEND MACHINIST
Very Nice- MT2 cup center and MT2 spur center. Point is removable and fits both. MT2 cup center is in fine order. Unit is 3 1/2" long, face diameter is 1/2" MT2 spur center is also in fine order, shank measures 3" long, 1" across face. All in fine order, as shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
KDK TOOL POST #1168 forLogan South Bend lathe
This listing is for a KDK tool post#1168 for Logan or South Bend lathes. It is 2 1/4" tall 2 1/2" wide and 4 1/2" long. The"T" nut base measures 1 15/16 X 3 X 3/8" I do not know the series. But it is for 11"+ lathes. The handle has been brazed, but functions properly. I accept POSTAL MONEY ORDERS as well as PayPal. I describe the items that I sell to the best of my ability. Please ask any questions BEFORE bidding. I always combine shipping when possible. So bid accordingly I DO SHIP INTERNATIONALLY. Email me for an accurate shipping quote. Check out my other auctions for other lathe equipment and items. A 20% restocking fee will be charged to ALL items returned UNLESS what you received was NOT AS DESCRIBED.
ORIGINAL TAPER ATTACHMENT PART BINDER STUD SOUTH BEND 9" 10K METAL LATHE
Excellent condition- Original taper attachment binder stud and washer assembly for a 9" or 10K South Bend lathe. Components for these units are very difficult to come by. In very f ine order. As shown. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
PARTS LIST vintage SOUTH BEND 9-INCH LATHE & ATTACHMENTS mdls A, B, C no. 30-B
The covers. And the very first page, are soiled. All other pages are crisp and clean. No loose or torn pages or covers. This is an original manual. Not a copy. I have similar titles listed separately and will combine shipping. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13ef9333f6e-0xf7-
South Bend 9" Metal Lathe Headstock Spindle 1 1/2" x 8 TPI Threads
South Bend 9" Metal Lathe Headstock Spindle 1 1/2" x 8 TPI Threads It comes with the woodruff key. The spindle is in fine condition with some wear. See pictures. This spindle is off of a South Bend 9 inch metal lathe. It has 1 1/ 2" x 8 TPI Threads. The inside taper is MT3. The threads are in fine condition. The gear teeth are in good condition with some age wear. See pictures. It is sol d as pictured. See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $13.00 for USPS Priority Mail Shipping with Delivery Confirmation within the United State s. I can combine shipping. International buyers please contact me before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
WILLIAMS, SOUTH BEND LATHE TOOL POST WRENCH 1/2", ATLAS LOGAN
Offered is a Williams 1/2" Combination tool post wrench. In good used condition. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13efac57ff5-0x100-
SOUTH BEND LATHE 10"BANJO BRACKET WITH GEAR STUD
Offered is a good used Idler Banjo. It includes the One stud with a damaged gear. The pic of the Gear shows the missing tooth.
South Bend 9" Metal Lathe Gear Cover Guard Door with Threading Chart
South Bend 9" Metal Lathe Gear Cover Guard Door with Threading Chart Comes with Thread Chart. It is in good condition with some wear. It is o ff of a South Bend 9" Swing 54" Bed Metal Lathe. See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 16.50 for USPS Priority Mail with Delivery Confirmation within the United States. I can combine shipping. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions.
Original South Bend Skinner 4 Jaw Lathe Chuck 10" No4210 2" Thru 2-3/8-6tpi fit
Original South Bend Skinner 4 Jaw Lathe Chuck 10" No4210 2" Thru fits 2-3/8-6tpi threaded spindle
South Bend lathe 16/24 gear cover door with hinge bracket.
This was removed off the monster 16/24 south bend lathe. it is specifically for the 16/24. But if you did the conversion and added the riser blocks and never realized why your old door did not fit this is the alternative to fabing up your own. Besides its in great shape with no cracks. Its heavy but will ship as long as buyer pays. Any questions feel free to ask. Posted with 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13efc230011-0x101-
BUCK AJUST-TRU LATHE 3 JAW CHUCK 1 1/2" x 8 TPI ATLAS CRAFTSMAN LOGAN SOUTH BEND
LOTS OF AUCTIONS ONLINE NOW! Brand Buck Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Includes Reverse Jaws. Buck# 2534 1 1/2" x 8 TPI 5" Dia. 3 Jaw Self Centering 11.12 lbs. Includes Key I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the ... moremachinist and woodworker.
17 Collets - Hardinge 5C, Hardinge 1AM, Ames, South Bend - Lathe Machining
HIDDENTREASURE4U is pleased to present to you 28 Small Collets Included as shown above. Ames 9/16 Hardinge 5C- 3/16. 7/16, 1/2, 51/64 Hardinge 1AM- 1/4. 3/8, 1/2 South Bend 1/8. 1/4, 1/2 6 tall skinny unmarked collets. The South Bend 1/4 collets has a cylinder of metal inside of it. Previously owned. Signs of use. Sold as is. P lease click on the glittering chest to see ALL our other treasures that we have up for auction and browse through our Ebay Store for fixed price instant shopping. Please email any questions you might have! I am more than happy to combine shipping wherever possible when all items are paid for in one payment. SHIPPING* US Buyers* S/H is calculated based on your eBay registered address. California residents to add sales tax. Signature upon delivery required. Insurance included. Parcel Select and UPS ground in shipping ... morecalculator. I will also ship Fedex Ground(prefered to UPS) International buyers* S/H is calculated based on your eBay registered address and includes insurance. You. My international buyer, are responsible for the taxes. Tariffs, broker fees and any other charge your country imposes. The package will be marked"merchandise" not gift. The purchase price not including shipping will be the declared value on the customs label. FORMS OF PAYMENT* US Buyers* Paypal with confirmed addresses* International Buyers* Paypal with confirmed addresses. Please contact me within 3 days of receipt of your item should there be an issues to address. Otherwise. I will consider the transaction satisfactory and accepted by customer. Payment should be received within 10 days of my email to you stating total owed unless arranged prior to bidding. If payment hasn't been received by then. I reserve the right to relist the item and begin the process to cancel the transaction. Thanks for your interest! Powered by The free listing tool. List your items fast and easy and manage your active items.
South Bend Lathe leadscrew bearing support for 16" and 16/24" swing
Will include hardware. Any questions feel free to ask. Posted with
RECONDITION 10" SOUTH BEND LATHE 4 FOOT ( W O W ) we
HEAVY TEN 28 CC 1-3/8 SPINDLE THRU HOLE 3 PHASE MACHINE THIS IS AS NICE AS THEY GET IN EXCELLENTSHAPE COMES WITH A 3 JAW CHUCK DRILL CHUCK LIVE CENTER QUCI CHANGE TOOL HOLDER THREAD DIAL CALL FOR A SHIPPING PRICE. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13f01bc726c-0x103-
Machinists 6/1B Buy Now (8)Nice USA Lathe Tool For South Bend 9" + Atlas 10"-12"
See Pic Standard 7/16 x.800 Shank Bit Made For Oversize 5/16 Bit ````````````````````````````````````````````````````````````````````````````````````````````````````````. Cheap Shipping on all smalls + no bs combining"I just wanted to personally say thank you for holding the tools for me and then refunding me some shipping money when I added additional tools. That was totally unexpected. With out a doubt your integriiity and customer service is the best I have ever experianced in my twelve years with Ebay. You are the BEST. Will definately be doing business with you again. No need for me to use any one else! Thanks again so much. PS I wish they would give outstanding sellers awards- you are all action with no BS" bs" ="discount" on 2nd item where they are still boning you on shipping cost for their own greedy and ... moretacky profit motivations.Your're not stupid-do the math! XXXXXXXXXXXXXX Buy it now cheapies. Smalls, one offs, who knows what it izzes" as izzes and oddballs XXX@ all of this stuff is blow out priced and you can still combine@ I ship everywhere COMBINE! mpn Cleveland Twist Drill C14499 Aircraft Drill Set. 29 PC, Co, 135 Deg nice stuff" Saved huge on shipping by combining" I BUY LOTS OF TOOLS FROM THIS SELLER& THEY ARE ALLWAYS A#1++++++" Fastest shipping ive experienced" and my favorite"NICE NOT TO GET SCREWED ON SHIPPING" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cheap real cost shipping Combine! CHEEP SHIP worldwide ship no problemo@ Combine-I can cram a bunch of this stuff into a 5 buck flat rate envelope(cheeeep ship on all smalls) combine! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I can stuff a bunch into a single flat rate box@ 10.90 or jump up to the 15.00 large flat rate box@ Realistic cost shipping via flat rate boxes@ IMPORTANT-READ! its good) Im listing a pile of small tooling. All of this stuff is listed as real cost 5.00 flat rate shipping. Buy a pile and combine it all. You can buy 5
South Bend Lathe 14-1/2" , 16, 16/24 lead screw for an 8' bed
This is large. Just removed the other day off a 16/24. any questions just ask. I will only ship if your willing to find some one to ship.and of course you pay for it. otherwise local pickup or drop off. Posted with
YUASA 5C COLLET INDEXING 2 1/4" x 8 TIP FITS SOUTH BEND LATHE CHUCK MILLING MILL
LOTS OF AUCTIONS ONLINE NOW! Brand Yuasa Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
SOUTH BEND LATHE TOOL POST AND 5 TOOL BIT HOLDER AND TWO KNERL, 13" LATHE
YOU ARE BIDDING ON SOUTH BEND LATHE TOOL POST AND 5 TOOL BIT HOLDER AND TWO KNERL. 13" LATHE ANY QUESTIONS PLEASE ASK. PLEASE LOOK AT MY OTHER PLIERS FOR SALE KNIPEX& KLINE ALSO HAVE OTHER BRIDGEPORT STUFF AND WILL BE SELLING LATHE AND MILLS IN FUTURE! ANY QUESTIONS PLEASE ASK! ONLY USA BUYERS! PLEASE LOOK AT MY OTHER TOOLS! ONLY SELL IN USA! SO PLEASE DONT ASK. SHIPPING BASED ON YOUR ZIP CODE. COMUNICATION IS IMPORTANT TO KEEP THE BUYER HAPPY. I DONT HAVE ANY PROBLEM WITH PICK-UP AT LOCATION. I WILL GIVE DELIVERY CONFORMATION IF YOU WONT IT DOES COST EXTRA. ALSO IF YOU WONT INSURANCE PLEASE STATE THAT YOU DO. THE POST OFFICE CAN BE ROUGH WITH PACKAGES. PAYMENT MUST BE RECIEVED WITHIN 7-DAYS OR ITEM WILL BE RELISTED.
9" South Bend lathe 1-1/2 x 8 threaded plate work plate
8-1/2" DIA WITH THREADED HOLES ORIGINAL SOUTH BEND PARTS NUMBER WE COMBINE SHIPPING
South Bend 9" Metal Lathe Bull Gear 76 Tooth Bull Gear
The following auction is for a South Bend 9" Metal Lathe Bull Gear 76 Tooth Bull Gear It is in fine condition with some wear. The gear teeth are in fine condition with minor wear. See pictures. It is o ff of a South Bend 9" Metal Lathe See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 1 3.00 for USPS Priority Mail shipping with Delivery Confirmation within the United States. I can combine shipping. International buyers please contact me for shipping rates before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions. Posted with
Vintage South Bend? Atlas? Gear Change Lathe Gears
This auction is for a set of change gears for a lathe. They came tagged that they fit a 9" South Bend Lathe. There are 13 gears altogether. They all have a 1/2" diameter keyed hole. They range from 32 tooth to 80 tooth. Take a look and see if they are something you can use. Please e-mail any questions and thanks for looking!
SOUTH BEND LATHE 9" HIGH SPEED HEAD STOCK CASTING NICE
THIS IS A VERY NICE HIGH SPEED HEAD STOCK CASTING FOR THE 9" SOUTH BEND LATHES. THIS HAS THE SEGMENTED BEARINGS AND THEY ARE EXCELLENT WITH NO SCORING. INCLUDED IS THE MOUNTING CLAMPS.OIL CUPS,SPRINGS AND FELTS. I WILL COMBINE MULTIPLE ITEMS TO SAVE ON SHIPPING. INTERNATIONAL BIDDERS WELCOME AS LONG AS PAYMENT IS MADE THROUGH PAYPAL. GOOD LUCK AND HAPPY BIDDING!
SOUTH BEND LATHE 9" TAIL STOCK SPINDLE
THIS IS THE TAIL STOCK SPINDLE FOR THE 9" SOUTH BEND LATHE. IT HAS NO GRADUATIONS AND A FEW VERY SMALL DINGS BUT HAS A NICE TAPER AND THREADS. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!
SOUTH BEND LATHE 9" & 10K BACK GEAR LEVER AND ECCENTRIC
THIS IS THE BACK GEAR LEVER AND ECCENTRIC FOR THE 9" AND 10K LATHES. GOOD USED CONDITION. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!
SOUTH BEND LATHE 9" & 10K LEAD SCREW REVERSER CASTING
THIS IS THE LEAD SCREW REVERSER CASTING FOR THE 9" AND 10K LATHES. GOOD USED CONDITION. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!
SOUTH BEND LATHE 9" & 10K SWIVEL COMPOUND/CROSS FEED HANDLE
THIS IS AN ORIGINAL SOUTH BEND LATHE COMPOUND CROSS FEED HANDLE FOR THE 9" AND 10K LATHES. THIS IS THE SWIVEL TYPE BUT IS MISSING THE BUSHING INSIDE THE KNOB. OTHERWISE IT IS NICE. GOOD USED CONDITION. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!
SOUTH BEND LATHE 9" DOUBLE ARM BANJO
THIS IS THE TWO ARM BANJO FOR THE 9" SOUTH BEND LATHES IN EXCELLENT CONDITION. THIS CAME FROM A MODEL A. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!
SOUTH BEND LATHE 9" TAIL STOCK HOUSING AND BASE
THIS IS THE TAIL STOCK HOUSING AND BASE FOR A 9" SOUTH BEND LATHE MODELS A.B AND C. IT HAS VERY SLIGHT WEAR ON THE BOTTOM BUT NOT LIKE MANY OTHERS. THE PREVIOUS OWNER FOR SOME REASON GROUND THE OIL DAUBER AREA DOWN BECAUSE IT WA S PROBABLY BROKEN THERE. OTHER THAN THAT IT IS A GOOD FOUNDATION FOR A TAIL STOCK. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!
SOUTH BEND LATHE HEAVY 10" GEAR COVER
THIS IS THE GEAR COVER FOR THE SOUTH BEND LATHE 10L WITH SINGLE LEVER GEAR BOX. TAG READS 10L 3 1/2' BED CAT# 1001Z. IT IS NICE CONDITION BUT THERE IS A CRACK NEAR THE TOP BUT NOTHING MISSING AND ITS STILL SOLID. IT IS HARD TO NOTICE AND I DO NOT THINK IT WILL EVER BREAK UNLESS YOU DROPPED IT. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!
SOUTH BEND LATHE HEAVY 10" RIGHT SIDE BED FOOT ADJUSTABLE
THIS IS THE RIGHT SIDE BED FOOT FOR THE HEAVY 10" SOUTH BEND LATHE MOUNTED ON THE TUBULAR BASE CABINET. THIS IS THE ADJUSTABLE ONE TO LEVEL THE LATHE. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!
BBH100T SOUTH BEND LATHE BORING BAR HOLDER MACHINE SHOP MACHINIST TOO LONG 1 5/8
YOU ARE PURCHASING THE PICTURED BORING BAR HOLDER. THEY ARE USED. PLEASE SEE THE PICTURES FOR DESCRIPTION. I SHIP 95% OF MY LISTINGS SAME DAY AS PAID FOR IF PAID BY 3:00 E.S.T. OHIO) IF YOU MUST HAVE SAME DAY SHIPPING PLEASE CALL ME AT 937-475-3068 TO BE SURE I SEE YOUR PAYMENT. OR EMAIL THRU EBAY MESSAGING. I WILL COMBINE SHIPPING ON SMALLER ORDERS. I WILL SHIP WORLDWIDE. THANK YOU. Z.
SOUTH BEND LATHE BOOKLETS-EIGHT COMPLETE "HOW TO" BOOKLETS FROM THE 1930'S-NICE
This is a Lindsay book. South Bend Lathe Booklets, Eight Complete"How To" Booklets from the 1930's, Grind Valves, True Brake Drums, Make Bushings, Finish Pistons, Test and True Differentials, Grind Lathe Tool Cutter Bits, Cut Screw Threads in the Lathe and Bore Rebabbitted Connecting Rods. It is in good to very good condition I go to the post office on Monday. Wednesday and Friday for shipping. Shipping and Handling will be $5.00. No International Shipping I do not refund. I accept Paypal. Thank you for looking at my items.
Hardinge, South Bend Lathe 5C Draw Bar Indexer
Normal 0 MicrosoftInternetExplorer4 Normal 0 MicrosoftInternetExplorer4 Normal 0 MicrosoftInternetExplorer4 Up for an auction is a used 5C Draw Bar that came with my Hardinge ESM/ TR59 model(9” swing) It is shorter by about 5/8” then my regular Hardinge draw bar. So I’m not sure if it’s from a Hardinge Indexer or from another lathe. Last picture shows the comparison in length. I do not know the exact shipping costs. So please don’t ask me while the auction is running. I do not profit from shipping and packaging so I will charge you what ever is the actual cost. I will try to find a good balance between using the smallest size box with enough padding for safe delivery. After w inning the auction, p lease hold your payment until I pack it and find out the exact shipping costs. Please Note: All my Hardinge related auction items came from the ... moresame lathe Hardinge ESM/ TR 59– 9” swing which I got from an elderly Normal 0 MicrosoftInternetExplorer4 gentleman who got ill and deiced to part with some of his stuff. I believe it was used in a home environment so most of the stuff is well taken care of. All sales are final. No returns or exchanges.
SOUTH BEND LATHE HEAVY 10" LEAD SCREW COVER CAST IRON
THIS IS THE LEAD SCREW COVER MADE OF CAST IRON FOR THE HEAVY 10" LATHE. GREAT CONDITION. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING! 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13f0522e87d-0x102-
SOUTH BEND LATHE HEAVY 10" LEAD SCREW END BEARING
THIS IS THE LEAD SCREW SUPPORT FOR THE HEAVY 10" LATHE. GREAT CONDITION. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!
SOUTH BEND LATHE HEAVY 10" TOP HEAD STOCK COVERS
THIS IS THE TWO CAST IRON HEAD STOCK COVERS FOR THE HEAVY 10" LATHE. THE PREVIOUS OWNER MADE A FLIP UP DOOR THAT WORKS GOOD. MUST BE PAID FOR BY PAYPAL. GOOD LUCK AND HAPPY BIDDING!
ARMSTRONG #2B LATHE BORING TOOL HOLDER SOUTH BEND LOGAN HARDINGE ETC.
LOTS OF AUCTIONS ONLINE NOW! Brand Armstrong Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Body: 3 1/2" Dia. Fits Bars: 9/16" 15/16" 1 5/16" Bottom Square: 3 1/2" x 2 1/4" x 1/2" I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling ... morefine tools for the machinist and woodworker.
ENCO LATHE TOOL POST SOUTH BEND LOGAN HARDINGE MONARCH CLAUSING ETC.
LOTS OF AUCTIONS ONLINE NOW! Brand Enco Packaging None Condition Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* 4 1/2" Square. 1 1/4" Max Bit. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
Tail Stock Drill Chuck for Lathe or Drill ,South Bend,Logan,Atlas,Enco,Craftsman
Excellent Tail Stock Drill Chuck for Lathe or Drill Press Number 8T3 by Supreme Products. Chicago IL. 2 MT arbor by Supreme Products, chuck key by Supreme Products, 1/8" 5/8" capacity, smooth operating. These are used parts. They are normally listed for a fraction of new price. If you are looking for new or new old stock, please keep this in mind. I do my best to describe as accurately as possible. Some adjustment, additional cleaning, lubrication, paint, etc. may be necessary. Shipping shown for USA. I no longer ship international. Happy to combine shipping. Ask questions before bidding. Items are shipped with delivery confirmation. Buyer may request insurance.
LATHE TOOL POST SOUTH BEND LOGAN ATLAS CRAFTSMAN MYFORD
LOTS OF AUCTIONS ONLINE NOW! Brand Unknown Packaging None Condition Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* 3 1/2" Square. 3/8" Max Bit. Could be adapted to fit most small lathes. The 4 bolt holes match the Myford Super 7 compound table but the T nuts will need to be replaced. Missing Handle. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. ... moreAll shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker. e5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-13f0522e72f-0xf6-
SOUTH BEND 9" LATHE TENSIONER LEVER
LOTS OF AUCTIONS ONLINE NOW! Brand South Bend Packaging None Condition Very Good Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker.
HOW TO RUN A METAL WORKING SHAPER AND DRILL PRESS-SOUTH BEND LATHE WORKS BOOK
This is a Lindsay publications reprint of How to Run a Metal Working Shaper and Drill Press. Two complete instructional Booklets originally published by South Bend Lathe Works It is in good to very good condition I go to the post office on Monday. Wednesday and Friday for shipping. Shipping and Handling will be $5.00. No International Shipping I do not refund. I accept Paypal. Thank you for looking at my items.
ORIGINAL SOUTH BEND LATHE CROSS SLIDE THREAD THREADING STOP MAYBE HEAVY TEN 10
Description: Here's a real nice South Bend Metal Lathe Cross Slide Thread or Threading Stop Attachment/ Accessory. The bottom of the V is 1 5/8" when it's closed and the top of the V is just over 2" as pictured. I was told this fits a Heavy Ten/10 but not positive. Please look at the pictures as they are part of the description also. Describing an item: Please remember I do not claim to be an expert on any of the items I sell. If you really truely believe I missed something or I misrepresented any item please contact me so we can work it out to our mutual satisfaction prior to leaving negative Feedback. I wish to make my auctions end on a good note for both the buyer and myself. Thanks Shipping: Combined shipping is always used whenever possible to save you on shipping costs and if it's cheaper to use Flat Rate Shipping ... morethan I may also go that route. I almost always give the buyer two options for shipping. Parcel Post(2-9 Day Delivery) and a Flat Rate Priority Mail(2-3 Day Delivery) You need to look at the invoice and choose which method you would like to pay for. Shipping to the lower 48 only unless you email me first and I'll look at it on a case by case option. No shipping to a Post Office Box! Invoicing: Winning bidder must respond to my invoice with payment or plan of payment within 48 hrs. of the auction ending- Failure to do this will result in item being relisted unless prior arrangements were made with me. I can work with just about anybody or any situation as long as I know what the game plan is ahead of time. Payment by Paypal. NO CHECKS" Payment due in 10 days or Ebay will be notified claiming you as a non paying bidder.
South Bend Lathe 16/24 riser blocks for complete conversion
This is the complete conversion. This was recently removed of an 8 ft 16/24 south bend. I washed up the parts and inspected them. they could use a second washing before installation. If you don't know much about the early south bend lathes this is there monster.aka profit maker. they had made 2 bigger versions but are kind of gone and faded into history. I 0wn one myself and love it. Its like the 9" swing only bigger. So at the factory the used the 16" swing base models and added the risers so you could swing bigger parts. Hense the name 16/24. Ok enough jabber jaw. The three blocks are. 1 head stock riser 1 compond riser 1 tailstock riser 2 Bolts for headstock 1 Set of gears for the spacing(NOT IN PIC but will include 2 bolts for gears and tailstock bolt) So if you still have questions ask. The machine was bound to the scrap ... moreyard before I saved it I have other parts which I will put up as I get a chance. Posted with
South Bend 9" Metal Lathe Lead Screw Bracket Support Leadscrew
South Bend 9" Metal Lathe Lead Screw Bracket Support Leadscrew It is in fine condition with some wear. See pictures. It has a 1/2" center hole. It is o ff of a South Bend 9" metal lathe 54" bed m odel. See pictures below. Please e-mail me with any questions or for additional pictures. Winning bidder pays $ 6.00 for USPS Priority Mail Shipping with Delivery Confirmation within the United State s. I can combine shipping. International buyers please contact me before bidding. I accept Paypal. Payment must be received within 5 days of auctions end. Thank you for looking. E-mail me with any questions.
Jacobs Chuck No 32 Cap 0-3/8" from South Bend 1937 Workshop Lathe Model 405-Y
This is a Vintage Jacobs chuck on a 1/2" diameter shaft that came with the purchase of a Vintage 9" South Bend Workshop Metal Lathe with a 9" swing and 3 foot Bed. It is Serial#55177 Catalog No. 405-Y. Made by South Bend Engine Lathes In South Bend Indiana USA. This is a Number 32 Jacobs chuck with a 0-3/8" capacity. It is on a shaft 1/2" diameter at the end for@ 1 1/2" It turns freely but.They are somewhat worn pitted and somewhat rusty(not as bad as the picture looks! with some nicks but in decent working condition for age-priced accordingly. Local pick-up available. I will combine shipping on multiple purchases when possible.
2 Number 2 Morse Taper Dead Centers South Bend 1937 Workshop Lathe Model 405-Y
This is a Vintage pair of Number 2 Morse Taper Dead Centers that came with the purchase of a Vintage 9" South Bend Workshop Metal Lathe with a 9" swing and 3 foot Bed. It is Serial#55177 Catalog No. 405-Y. Made by South Bend Engine Lathes In South Bend Indiana USA. The top one is@ 4 5/8" long has one flat side-see picture stamped LANDIS. The other is@ 4 1/4" Long also LANDIS The previous owner told me the lathe was from 1937 but I don't have verification of that. They are somewhat worn pitted and somewhat rusty with some nicks slightly dull points but in decent working condition for age-priced accordingly. Local pick-up available. I will combine shipping on multiple purchases when possible.
(4) LATHE OR MACHINERY CAST IRON LEVELING FEET -SOUTH BEND LOGAN UNISORB
This is a set of(4) heavy duty adjustable cast iron leveling feet for a lathe or any piece of heavy machinery. I can't see a makers name but they're great quality and in good condition. Their size is shown in the pictures. Don't miss these as they include FREE Priority shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon ... morethe item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
READY TOOL Co. LATHE LIVE CENTER #5 MORSE TAPER - LOGAN SOUTH BEND CLAUSING ENCO
This is a READY TOOL COMPANY lathe live center with a#5 morse taper shank. This live center was quality made in the USA(about the best you can get) It has a nice smooth firm(correct) movement and is in great condition with no significant damage or wear to be found apart from some rust staining(see pictures) These live centers are'serviceable' you can dismantle them for service) Please see the pictures for good condition. Ready Tool makes a quality live center. Don't miss it! Remember. It also includes super-fast FREE priority mail shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ... moreebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positi
SOUTH BEND 10L or 13" lathe POT COLLET CLOSER 2-1/4X8 with POT COLLET
Here is a South Bend pot collet closer for a 10L or 13" lathe with a 2-1/4x8tpi spindle. Shows little actual use. In storage last 30yrs.Part comes with a 3-1/2" pot collet with a 3C shank. Shipping flat-rate to the lower 48 is $9 all others must contact seller for actual cost.
Logan # 430 3 Jaw 6" Lathe Chuck Mfg by Buck USA South Bend
Genuine All steel Logan 6" Lathe Chuck Mfg. in USA by Buck Great working condition. Includes both ID and OD Jaw sets. Has handling marks and dings visible in photos. This chuck has the exact same dimenstions as the Buck 6" Adjust Tru chuck and the AT back Plates fit this chuck" This chuck is basically a Buck#3634 without the 4 adjusting set screws. Jaws interchange also. Returns always Happily accepted
Buck Adjust Tru 2063R 3 Jaw 6" Lathe Chuck 2 1/4"-8 tpi Mount South Bend 10 13
Buck Adjust Tru 2063R 3 Jaw 6" Lathe Chuck 2 1/4"8 tpi Mount Mfg. in USA Includes Buck 2 1/4"8 tpi threaded Mount Backplate. Reverseable top jaws Excellent! Functions smooth. Tight and accurate. Has faint handling dings visible in photos. Includes Chuck key Returns always Happily accepted
Buck Adjust Tru 2534 3 Jaw 5" Lathe Chuck 2 South Bend Hardinge 10 13
Genuine All steel Kalamazoo Mi mfg. Buck Adjust Tru 2534 5" Lathe Chuck Mfg. in USA Good working condition. Includes both ID and OD Jaw sets. Inside jaw set was modified(see last 2 photos) Has handling marks and dings visible in photos. Returns always Happily accepted
armstrong lathe tool holder N9 Atlas, South Bend, Armstrong, 4" Shank
For Sale: Used Armstrong lathe tool holder N9 4" shank In fair shape. Cosmetically just needs to be cleaned up. Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder ... moreis deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB, IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. Feel free to Contact me personally at(815) 299-7625 Monday through Friday between 11:00am and 7:00 CST. I can also be reached by e-mail. I will answer yo
Aloris AXA Toolpost w/ T nut Fit South Bend Lathe Hardinge 10 13 Tool Post #2
Genuine Aloris AXA wedge styleToolpost Working conditon. Functions smooth, Very tight and accurate. Has a 2 crash dings visible in the 4th and 5th photo that are cosmetic and do not affect performance. Previous owner etched"Trueblood" on 2 sides the Toolpost. This is a great toolpost if you can overlook the visual flaws. Missing the Red Aloris Name Plate but is Genuine Aloris. Will fit most 9-14" lathes with normal T-nut modification. Returns always Happily accepted
South Bend 9" Lathe Face Plate - 8-3/4" Diameter Cast Iron 1-1/2 x 8 tpi
8-3/4" Diameter Cast Iron Face Plate for 9" South Bend Lathe. 1-1/2 x 8 TPI- May also fit Atlas. Cra ftsman. Logan etc. I used this a few times on my South Bend 10K. But it requires a spacer(which I'll include) to clear the headstock. Please see my other listings for more lathe parts. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Skinner 6" 4 Jaw Lathe Chuck #4806 South Bend, Atlas, Logan, Craftsman 1.5x8tpi
Skinner#4806 6" 4 Jaw Chuck for South Bend 9" 10K Lathe. Should also fit other lathes with a 1-1/2" x 8tpi spindle. Nice condition. Has been disassembled. Cleaned and re-l ubricated. Works smooth as butter. Has a few nicks around the bore. See pictures for details) Please see my other listings for more lathe parts. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
South Bend 9" Lathe Belt Tensioning Assembly
Belt Tensioning Lever Assembly for South Bend 9" Lathe. May also fit 10 K- Please check f itm ent before b idding. Please see my other listings for more lathe parts. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
SOUTH BEND 13 inch LATHE CROSS SCREW BUSHING-BIG DIAL
Here is a SOUTH BEND 13" lathe CROSS SCREW BUSHING for a BIG DIAL with a 3" collar. PN PT 63 T2 this part only has a small wrench mark on the hex that would make you think it was ever used. In a box the last 30yrs. A hard to find South Bend part for converting to the large dial. Shipping flat-rate to the lower 48 is $9 all others must contact seller for actual cost.
Drill Bit 5/8 Morse Taper 2 for Machinist South Bend Lathe 9 10 Mill Press CNC
One Used USA Drill Bit 5/8. 2MT shank, 5 1/2" drill length, 9" OAL, HSS, 118 degree I have several more taper shank drills listed and will combine shipping. Item in the picture is the one you will receive. I do combine shipping. Ships to USA only. PayPal only.
Drill Bit 7/8 Morse Taper 3 for Machinist South Bend Lathe 9 10 Mill Press CNC
One Used USA Drill Bit 7/8. 3MT shank, 6 1/2" drill length, 11" OAL, HSS, I have several more taper shank drills listed and will combine shipping. Item in the picture is the one you will receive. I do combine shipping. Ships to USA only. PayPal only.
Drill Bit 59/64 Morse Taper 3 for Machinist South Bend Lathe 9 10 Mill Press CNC
One Used USA Drill Bit 59/64. 3MT shank, 6 1/2" drill length, 11" OAL, HSS, I have several more taper shank drills listed and will combine shipping. Item in the picture is the one you will receive. I do combine shipping. Ships to USA only. PayPal only.
Drill Bit 49/64 Morse Taper 2 for Machinist South Bend Lathe 9 10 Mill Press CNC
One Used USA Drill Bit 49/64. 2MT shank, 6 1/4" drill length, 10" OAL, HSS, 118 degree, I have several more taper shank drills listed and will combine shipping. Item in the picture is the one you will receive. I do combine shipping. Ships to USA only. PayPal only.
Drill Bit 43/64 Morse Taper 2 for Machinist South Bend Lathe 9 10 Mill Press CNC
One Used USA Drill Bit 43/64. 2MT shank, 5 1/4" drill length, 9" OAL, HSS, 118 degree, I have several more taper shank drills listed and will combine shipping. Item in the picture is the one you will receive. I do combine shipping. Ships to USA only. PayPal only. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13f0ca081d5-0x106-
Drill Bit 41/64 Morse Taper 2 for Machinist South Bend Lathe 9 10 Mill Press CNC
One Used USA Drill Bit 41/64. 2MT shank, 5 1/4" drill length, 9" OAL, HSS, 118 degree, I have several more taper shank drills listed and will combine shipping. Item in the picture is the one you will receive. I do combine shipping. Ships to USA only. PayPal only.
Drill Bit 39/64 Morse Taper 2 for Machinist South Bend Lathe 9 10 Mill Press CNC
One Used Chicago Latrobe Drill Bit 39/64. 2MT shank, 5 1/4" drill length, 9" OAL, HSS, 118 degree, I have several more taper shank drills listed and will combine shipping. Item in the picture is the one you will receive. I do combine shipping. Ships to USA only. PayPal only.
Drill Bit 37/64 Morse Taper 2 for Machinist South Bend Lathe 9 10 Mill Press CNC
One Used USA Drill Bit 37/64. 2MT shank, 5 1/4" drill length, 9" OAL, HSS, 118 degree, I have several more taper shank drills listed and will combine shipping. Item in the picture is the one you will receive. I do combine shipping. Ships to USA only. PayPal only.
Sheldon lathe crossfeed screw south bend logan atlas
I'm not positive. But I think this crossfeed screw came off of an older 11 inch Sheldon lathe. The crossfeed nut has a chip broken off of it. Overall length is about 12-3/4" There is some wear on the screw/crossfeed nut. The last photo shows the end of the screw where there is little wear. K128 is stamped on the crossfeed nut.
RARE SOUTH BEND 10K LATHE TOOL POST TURRET ATTACHMENT GREAT ORIGINAL SHAPE RARE
RARE SOUTH BEND 10K LATHE TOOL POST TURRET ATTACHMENT GREAT ORIGINAL SHAPE RARE Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge RARE SOUTH BEND 10K LATHE 4 WAY TOOL POST TURRET ATTACHMENT. MARKED 100K ON THE TOOL. MEASURES APPROX 2 1/2 FROM BOTTOM OF TOOL TO THE TOP OF THE TOOL BIT WEDGE. SHOULD BE THEN 2 7/8 USING THE 3/8 BITS IT REQUIRES. SIMPLY MOVE HANDLE FORWARD TO TURN THE TURRET AND PULL LEVER BACK TO LOCK AT EVERY 90 DEGREES. HAS 1 3/8 POST TO FIT IN PLACE OF YOUR COMPOUND. SHOWS VERY LITTLE USE AND HAS VERY LIGHT SURFACE RUST( NOT PITTING) I WILL CLEAN AND OIL FOR SHIPMENT. PLEASE SUPPLY THE MEASUREMENT F ROM YOUR SPINDLE CENTER TO THE TOP OF YOUR CROSSLIDE WITH COMPOUND REMOVED TO VERIFY CORRECT FIT OF THE ATTACHMENT. THANKS. AND VISIT MY EBAY STORE. http:stores.shop.ebay.com/My-Machine-Shop ... moreI USE USPS AND UPS AS I NEED. I WILL COMBINE BASED ON SIZE. WEIGHT AND COMPATABILITY. I ACCEPT PAYPAL AND LOCAL PICK-UP. DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000. InkFrog Analytics.
Armstrong Lathe Cut-Off Tool Holder #-30R Chicago USA Fits South Bend Atlas
Armstrong Lathe Cut-Off Tool Holder#30R Chicago USA Fits South Bend Atlas This auction is for a Vintage Armstrong Lathe Cut-Off Tool Holder. Patented Tool Holder. 30R. Tool is in good condition. See photos for details. Payment is expected with in 4 days.After 4 days ebay automatically sends a non-paying bidder alert.After 7 Days the item will be relisted.I accept paypal as payment. I have a five day handeling time.I ship all orders promptly and I also upgrade most orders to first class or priorty mail so delivery is typically faster then advertised. All shipping costs are listed in every auction.if you dont like my shipping cost*Dont Bid* I will not Adjust or change my Shipping. All items sold as-is unless stated.I am not a Expert in any field and some of the time I have no idea what a item is.I do my best to describe everything accurately. ... moreBut I am human and do make mistakes.If you notice a error in a listing please let me know and I will do my best to fix it. I have been selling on ebay and other online websites for over 11 years.All my items come estates or Storage units.So the Items might be dusty or musty. I do not clean vintage items. I am not a expert and don't want to clean the item and ruin it. 95% of my buyers are collectors and know the proper way to clean it. Everything being said. I do have a favor to ask.Please leave a 5 star rating on all categories when you leave feedback.if i did not earn a 5 out of 5 on all categories for your order, Please let me know before you submit the feedback. I would rather receive no feedback then anything less then 5 stars.This will keep me in good standing with ebay and allow me to understand how I can make improvements to better serve you for future orders. In addition I always leave perfect feedback for buyers once good feedback is received.
South Bend 9" , 10K Lathe Furnas Switch. Fwd / Reverse with bed mount bracket
Furnas/ Sout h Bend Forward/Reverse Switch with be d mounti ng bracket. Switch works perfectly. Could use some new paint. Heavy duty cord and plug are new and in excellent condition. Please see my other listings for more lathe parts. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13f0f9479fe-0x109-
South Bend 9" , 10K Lathe Bull Gear
South Bend 9" 10K Bull Gear. Complete assembly with locking pin and retaining spring. Great condition. No b roken or chipped teeth. Please see my other listings for more lathe parts. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
South Bend 9" , 10K Lathe Change Gear. 5/8" Bore 80 Tooth
South Bend 9" 10K Lathe Change Gear- 5/8" bore. 80 Tooth. Great condition. No b roken or chipped teeth. Please see my other listings for more lathe parts. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Half Nut Handle Cam Lever Screw Bearing Spring from 9" South Bend Lathe
Half nut cam lever with set screw. Bearing and spring from a South Bend 9" Workshop model lathe. Comes as pictured. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote! I will be listing many more parts from this South Bend lathe. If you need something. Let me know! E5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-13f107fd1db-0xf2-
Lead Screw Bushings Bearings from 9" South Bend Lathe
Nice set of lead screw bearings from a 9" South Bend Workshop model lathe. Come as pictured. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote! I will be listing many more parts from this South Bend lathe. If you need something. Let me know!
Apron Rack and Pinion Gears and Stud from 9" South Bend Lathe
Rack and Pinion Assembly with Gears from a 9" South Bend Workshop model lathe. Includes pin for pinion gear. Set screw for stud, and mounting screws for rack. This lathe had been used to turn wood most of its life and these parts are in excellent condition. Threads are sharp and smooth with very little wear. Comes as pictured. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote! I will be listing many more parts from this South Bend lathe. If you need something. Let me know!
Cross Slide Screw and Nut from 9" South Bend Lathe
Cross slide screw and nut from a 9" South Bend Workshop model lathe. This lathe had been used to turn wood most of its life and these parts are in excellent condition. Threads are sharp and smooth with very little wear. Comes as pictured. We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote! I will be listing many more parts from this South Bend lathe. If you need something. Let me know!
Half Nuts and Lead Screw from 9" South Bend Lathe just over 39" long by 3/4" OD
Lead screw and half nuts from a 9" South Bend Workshop model lathe. Lead screw is approximately 39 1/4" long and 3/4" OD. This lathe had been used to turn wood most of its life and these parts are in excellent condition. Threads are sharp and smooth with very little wear(I can't measure any difference in thread width between the headstock and tailstock ends of the lead screw using my high quality Harbor Freight calipers) The only flaw that I have noticed is the key for the lead screw. Which someone appears to have filed down a bit(see the third to the last picture) These would be a great way to tighten up the thread cutting capabilities of your lathe! Come as pictured and will come packaged carefully within a PVC pipe to avoid damage to the lead screw during shipment. We are happy to combine shipping for multiple item purchases. ... morePlease email us for a shipping quote! I will be listing many more parts from this South Bend lathe. If you need something. Let me know!
Countershaft Support Casting Bearing from a 9" South Bend Lathe 10"
Solid old countershaft support casting from a South Bend 9" Workshop lathe. Some surface rust but in good usable condition. I apologize for the high shipping costs- this thing is heavy! We are happy to combine shipping for multiple item purchases. Please email us for a shipping quote! I will be listing many more parts from this South Bend lathe. If you need something. Let me know!
South Bend Milling Attachment 9 and 10K Metal Lathe
Up for your consideration is a Milling Attachment for the South Bend 9 and 10K metal lathes. It’s in excellent condition. It even has that little brass oil plug that goes in the oiling hole. The up and down feed handle turns free and smooth. I do not see any damage. No repairs, no cracks, no personal ID marks and rust is NOT an issue. To be sold as you see it pictured and the pictures are of the actual item. I ship out daily(except Sunday& Holidays) and process items within 24 hrs of payment. California residences will need to pay 8.5% sales tax or provide a valid resale license• Payment must be made within 4 days 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13f11777a2b-0x101-
NOS TRU-AX ADJUSTABLE CENTERING DEVICE ATLAS CRAFTSMAN LOGAN SOUTH BEND LATHE
LOTS OF AUCTIONS ONLINE NOW! Brand C-TEK Packaging In Original Box Condition New Old Stock Quantity 1 Ebay Rarity(1-6) Ebay Rarity is how often the item/s appear on ebay* This is the sole opinion of tool-in-the-box* Part# 10104. JT33F x JT33M. I accept Paypal. No personal checks. NJ residents pay 7% sales tax. Local pickup is only available on large items. International shipping is via USPS and will be marked merchandise with the exact cost. Shipping is usually within 3 business days. I will combine shipping costs to save you money. Please wait for a combined shipping invoice before paying. This invoice will be sent within 24 hours of auctions end. Returns are handled on a case by case basis. All shipping fees are non refundable. Always buying and selling fine tools for the machinist and woodworker. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13f1180b868-0x103-