In 
 
Order by: 
Available to: 
Price: 
 - 
$
2,000
Buy It Now
$0 Shipping
Condition: New
Location: New Haven,IN,USA
These are a set of VANS RAD/ SE RACING" size 9 shoe set complete with reversible pad set and extra laces. Brown and Baby Blue and high quality. Still ... morehave the original box. These pads are NEW and pads alone are well worth the starting bid price, but the shoes were worn ONLY once at a BMX bike show so are slightly used. Look at the pictures, they are barely used at all. Pads are Baby Blue and Brown checkered on one side and Brown suede on the other side, the neck pad is Brown suede only not reversible. Comes with everything shown in the pictures and the RAD PAD SET is beyond awesome! PAYPAL ONLY! INTERNATIONAL BUYERS WELCOMED! I CHARGED $50 FOR INTERNATIONAL SHIPPING- BUT BUYER WILL PAY ACTUAL SHIPPING CHARGES ONLY. ANY OVERCHARGES WILL BE REFUNDED)
$
1,175
6d 23h 48m 36s
0 bids
$100 Shipping
Condition: Used
Location: Miami,FL,USA
$
1,099
Buy It Now
$150 Shipping
Condition: Used
Location: Brockton,MA,USA
$
1,900
Buy It Now
$0 Shipping
Condition: New
Location: Ventura,CA,USA
$
1,999
Buy It Now
$0 Shipping
Condition: Used
Location: Livingston,NJ,USA
$
1,100
6d 9h 52m 38s
0 bids
$1,500 Now
$100 Shipping
Condition: Used
Location: Saint Petersburg,FL,USA
$
1,700
Buy It Now
$0 Shipping
Condition: New
Location: Lebanon,NJ,USA
$
1,599.99
3d 22h 51m 9s
0 bids
$199.99 Shipping
Condition: New
Location: Island Heights,NJ,USA
$
899
Buy It Now
$100 Shipping
Condition: Used
Location: Germantown,TN,USA
$
2,250
Buy It Now
$60 Shipping
Condition: New
Location: Charleston,SC,USA
$
1,249
Buy It Now
Free Shipping
Condition: New
Location: Bronx,NY,USA
$
1,350
4d 10h 28m 55s
0 bids
$100 Shipping
Condition: New
Location: Philadelphia,PA,USA
$
475
5d 3h 16m 18s
0 bids
$675 Now
Free Shipping
Condition: Used
Location: Elk Grove,CA,USA
$
2,700
Buy It Now
$0 Shipping
Condition: New other (see details)
Location: Buffalo,NY,USA
$
1,450
Buy It Now
$200 Shipping
Condition: Used
Location: Staten Island,NY,USA
$
1,100
3d 3h 36m 25s
0 bids
$100 Shipping
Condition: New
Location: Lithia,FL,USA
$
2,900
Buy It Now
$120 Shipping
Condition: New
Location: USA
Up for bids my SE BIKES" CROOKS PK RIPPER" 49CM.EXCELLENT CONDITION. FLIP FLOP REAR HUB.FIXED ON ONE SIDE FREEWHEEL ON THE OTHER. RIDDEN LITERALLY ... moreA COUPLE OF TIMES. HAS A SLIGHT SCRATCH ON HANDLE BARS. ON THE RIGHT PEDAL. AND NEAR REAR OF FRAME.BARELY VISIBLE. AS ALWAYS WITH ME THIS IS A CONTINENTAL U.S.A. AUCTION ONLY. I SHIP ONLY TO THE CONTINENTAL USA ONLY NO EXCEPTIONS. NO ZERO BIDDERS. SOLD AS-IS NO RETURNS.PLEASE ASK ALL QUESTIONS BEFORE YOU BID! GOOD LUCK! HERE ARE THE SPECS: New 2012 model. We teamed up with Los Angeles-based streetwear brand Crooks& Castles to offer an extremely limited edition PK Fixed Gear in a never-before-seen colorway. It has the exact same spec as the PK Ripper Fixed Gear but comes in a limited-edition camouflage colorway in collaboration with streetwear clothing brand. Crooks& Castles. This bike is extremely limited with less than 350 coming into the USA. Only 250 made. Very limited availability. Sizes: 49cm Color(s) Crooks Camo Frame: Compact Frame Geometry. 6066 Aluminum Floval Tubing, Internally Machined Integrated Head Tube, Looptail Rear End, Retro Dropouts& Gussets, All Sizes Can Barspin Fork: Cr-Mo Landing Gear. Butted for Strength, Accepts Pegs, 3/8” Dropout w/ Wide Tire Clearance Crankset: 3-pc Cr-Mo 8-Spine. Euro Sealed Bearing, 36T SE Bubble Sprocket Pedals: Odyssey Twisted Plastic Composite w/ Reinforced Crooks Foot Straps Chain: KMC Z410 Wheelset: SE Sealed Bearing High Flange Alloy Hubs. 36H, Fixed/Free w/ High Profile Double Wall Rims, 14T Fixed Cog& 14T Freewheel Tires: Kenda Keen 700x35c Brakes: Tektro R369 Dual Pivot Caliper F& R Brake levers: Tektro RX1.0 2-Finger F& R Headset: Tange Sealed bearing 1-1/8” Integrated Threadless Handlebar: Cr-Mo SE Racing Floval Bar. 26” x 5” Stem: Affix Strangler 6061 T-6 Alloy. Zero Degree Drop, 22.2mm Clamp Tape/grip: S1-E Dual Ply Retro Grip Seat: SE Lightning Boss Seat w/ Bottle Opener Seat post: 3-D Forged Alloy One Piece. Aluminum 27.2, Weight: 24.20lbs/ 11kgs(49cm)
$
350
4d 8h 10m 0s
0 bids
$0 Shipping
Condition: Used
Location: Philadelphia,PA,USA
Big Ripper! Old School Up for bid is one of my favorite posessions. It is my SE Racing Big Ripper. Total old school flare with new school ride! If you ... moreare a fan of 80s music and old school BMX.I will be willing to part with one of my favorite little gems to the right buyer. It is a true 29r/700c I have rode this thing around the neighborhood. At campgrounds, and on the boardwalk. Everywhere I go this thing draws all kinds of attention and small crowds.especially from old school bmx-guys like me. I really really really hate to let this thing go.but am in need of the $. The bad: It has some very minor little dings/scratches to the paint(the worse of which I included in the photos) It also has been collecting some dust. You can see it in the photos. I didn't bother detailing this before the photos. Yes. I do frequently detail my bikes. Otherwise this thing is in great shape. Changes from stock: I changed the seat to a soft blue seat that is super comfy and looks more old school. It will come with the original seat. I changed the tires from the oversized beach cruiser tires it came with to an old school gum wall type tire(tried to mimic the old Comp III tires we tore around town in the 80s) I still have one of the original beach style tires if the winning bidder wants it. I swapped out the lame pedals with Hutch-style cage pedals.No they are not true Hutch brand cage pedals( Those things cost half as much as this whole bike) I chemically stripped the brake lever and brakes and repainted them with transparent blue paint. The originals were silver and black. 8P I just put brand new grips on this thing that are exactly same as the ones that came with the bike. They tend to get dirty fast. Because they are white. And. I put some aluminum grenade tire caps on it. I know this seems like a freakin ridiculous amount to pay for this. This is more than I paid for it.I admit. But again. I really do not want to let go of it. If I get a grand for it. Then I will part with it. If not, then I get to ke
$
2,849.99
Buy It Now
$149.99 Shipping
Condition: New
Location: Norwood,PA,USA
$
1,999
Buy It Now
$0 Shipping
Condition: New other (see details)
Location: Wheatland,CA,USA
in titles and description. Store home. SE Bikes Ripper JR 20' Alloy Landing Gear 1' Replacement BMX Fork Blue. Brand: SE Bikes Model: 2010 Ripper ... moreJr Landing Gear Condition: New OEM Never Mounted Color: Blue Features and Specs: A perfect replacement fork for your Ripper Jr or most other 20" Frames with 1" steertube. 100% Alloy Fork With Alloy Steer tube 300mm Alloy Steer tube Weight: 22.4oz Domestic: We ship 5 Days a week. Your product is generally shipped within 24 hours of receipt of payment. We use Fedex and USPS Mail. We may choose to minimize packaging to save on shipping weight. Our shipping prices include a handling fee. We charge this to cover packaging supplies. We take extra care in processing your orders to ensure a wonderful experience. We use 100% reused and or recycled materials inside our packages. International: No"gift" declaration or Under Value on customs forms for international shipments. Buyer is responsible for import duties. Taxes, or any other fees upon arrival. Shipping Discounts for Multiple Items. 1st item- full price. 2nd item- 50% discount. NO Combined Shipping on Multiple 99 cent Auctions. Email us for a shipping quote. Please include the following: Country, Postal Code, Preferred Carrier, Item title, Paypal. Visa, MC, Certified Funds. We prefer that you use eBay Checkout for fastest service. We accept Paypal Payments. Credit Cards by phone, fax or email, and certified funds mailed to us. Please pay for your order promptly so we can get it to you. We believe that feedback is an important part of the Ebay experience. We post feedback when we receive your payment. Please respond in kind by posting your feedback when you receive your product and are satisfied. To Learn more about our business. Please check out our. We want you to be happy with your purchase. If for any reason you are not completely satisfied. Return it for the purchase price of the item. Please see our for complete details.
$
2,000
Buy It Now
$100 Shipping
Condition: Used
Location: Sacramento,CA,USA
$
2,000
6d 6h 14m 6s
0 bids
$150 Shipping
Condition: Used
Location: Jacksonville,FL,USA
$
1,000
Buy It Now
$0 Shipping
Condition: Used
Location: Canby,OR,USA
I am selling my son's Ripper Jr race bike. He has moved up to an expert. Great starter Bmx racing bike. All stock parts. 3-piece crank, etc. Good ... morecondition. Here's the specs. Specifications Description Fork, 100% 1" Landing Gear Mini, Headset, FSA 1" Threadless Aheadset, Handlebars, Aluminum SE Mini Wing Bar. 22" X 4.5" Stem, SE Racing Mini. Front Load, 1" Alloy, Grips, Jr Size Kraton Rubber, Brake Lever, Tektro 317A. 2 Finger Alloy, Brake(s) Tektro 926AL Mini V-Brake. Slick Cable, Seat, SE Racing Mini w/ integrated Alloy Post, Seat Post, Integrated Aluminum 22.2, Seat Clamp, SE Racing Alloy, Crankset, Truvativ 3-pc Alloy. 155mm, Euro Sealed bearing, 41T Alloy, Chain, KMC Z30. Silver, Pedal, Wellgo Alloy Caged. CR-MO Axle, Rim, Alex VP-15F. 28 Hole Front, 32 Hole Rear w/ Black Stainless 14 Ga. Spokes, Front Hub, SE Racing Alloy. Hollow Axle, Sealed Bearing, Rear Hub, SE Racing Cassette. Sealed Bearing, Alloy, Cr-Mo Hollow Axle, w/ 16T Cassette, Tires, Tioga Comp III 1-3/8" Pegs, Nil, Gyro, Nil, Extras, Race Pads. Race Plate, Colors, Ball Burnished Silver, Weight, 17 lbs. No international shipping. Shipping will be $25 in the USA. Local pickup is fine. Email with questions. Thanks.
$
1,199.99
4d 4h 19m 30s
0 bids
$1,999 Now
$99.95 Shipping
Condition: New
Location: Forest Hills,NY,USA
$
1,999
Buy It Now
$0 Shipping
Condition: Used
Location: Livingston,NJ,USA
$
1,299
Buy It Now
$150 Shipping
Condition: New
Location: Santa Monica,CA,USA
$
1,400
6d 23h 54m 25s
0 bids
$150 Shipping
Condition: New
Location: Commack,NY,USA
$
500
Buy It Now
$0 Shipping
Condition: Used
Location: Brooklyn,NY,USA
Please find listed for auction a black pickguard from a 1970's Gibson Ripper Bass Guitar. This auction includes the pickguard and 9 original screws. ... moreThese parts are 100% vintage. From Ripper Bass serial number 122891(circa 1973-75) This pickguard does show cosmetic signs of wear(small cracks. Rust stains, scratches) but is 100% functional. These are original parts great for restoration projects. Buyer pays calculated shipping. Combined shipping available upon request for multiple parts. Please see our other auctions for more Ripper parts. Posted with eBay Mobile
$
11.01
Buy It Now
$0 Shipping
Condition: Used
Location: Salt Lake City,UT,USA
$
10.49
Buy It Now
$0 Shipping
Condition: New
Location: Queens Village,NY,USA
$
600
Buy It Now
$0 Shipping
Condition: Used
Location: Bristol,PA,USA
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! It is your responsibilty to read the auction entirely before bidding. A large percentage ... moreof our items are used and will not be in new condition. Pictures are of actual items and we do our best to describe each and every item. If you have doubts about an item either call us or emails us. Phone number is listed at the bottom of the auction ad. We are closed Thursdays and Sundays. Please click the pictures to view a larger version. Vintage SE Racing Ripper Brown Color BMX Bike 6061 Aluminum Frame 20x1.95 Rear You are bidding on a previously owned/used vintage SE Racing Ripper Brown color BMX Bike. This auction is for the bike you see pictured. Pictures are of actual item. I do not know that much about bikes so I did my best to picture it for you. Please use those to do as much research as you can. The frame is brown in color and is marked SE Racing Ripper 6061 Ripper. Forks are marked Landing Gear, Brake handle and rear brake is marked C Stan. Tires show their wear but seem to be holding some air. Size of the rear tire is 20x1.95 and the front is marked Tiandi 20x2.125. I hope you can use that to get the size of the bike as it is not marked anywhere on it. The bike shows its age/wear with scuffs, scratches, and some paint chip marks in the frame. Lots of dirt around the cog. The SE Racing Seat is torn/ripped up in the back portion of it. The bike has seen its fair share of use. The grips are worn with one being broken in half and has slid down to the inside portion of the handle bars. Those will need to be replaced. Serial number marked on the underside of the bike is ICSEL08476. Take your time to look at the pictures to get a better idea of the condition and what you are bidding on. Please take a moment to look at my other great auctions. Thanks ccloan Please Click to visit my other auctions! By placing a bid you agree to the Terms of Sale! Hours of Operation are from 11 to 5pm Monday- Friday. Closed Saturdays& Sundays. Payment Options: Credit Ca
$
447.99
Buy It Now
$0 Shipping
Condition: New
Location: North Brunswick,NJ,USA
$
2,399.99
Buy It Now
$165 Shipping
Condition: Used
Location: Fort Lauderdale,FL,USA
$
1,100
4d 7h 8m 14s
1 bids
$185 Shipping
Condition: New
Location: Bel Air,MD,USA
$
2,500
Buy It Now
Free Shipping
Condition: Used
Location: Davis Junction,IL,USA
$
1,199
Buy It Now
$0 Shipping
Condition: New
Location: Winter Garden,FL,USA
$
1,050
Buy It Now
$0 Shipping
Condition: Used
Location: Palm Beach Gardens,FL,USA
$
600
Buy It Now
$0 Shipping
Condition: New other (see details)
Location: Peoria,AZ,USA
$
1,999
Buy It Now
$0 Shipping
Condition: Used
Location: Staten Island,NY,USA
$
1,133.4
Buy It Now
$129.21 Shipping
Condition: Used
Location: Netherlands
This listing is for an very early 1980 Se Racing PK Ripper loop tail 20 inch frame in Aluminum finish. TT measures 19.5 and The decals are original. Believe ... morethis frame is 1981. The chrome forks are unstamped and came with the frame when I obtained it. I am not sure of their year though. The brake bridge has the normal crack for this frame. You can still mount a rear brake without any issues. There are numerous marks/scratches on the frame. But both are easy repair/ fixes. Someone scratched their name under BB, this should be able to come out with a little buffing. This is in pretty dam good condition for being over 30 years old. I planned on getting this finished. But I have since moved on to other projects. I will include brand new Aluminum rear drop out savers and some decals with purchase. Keep it original or get it refinished. I have tried my best to describe everything. So Please feel free to ask any questions or if you want more photos. If you are not happy I will accept a return, but at the buyers expense. Thanks for looking!
$
31.95
Buy It Now
$3.95 Shipping
Condition: Used
Location: Harrisburg,PA,USA
Warhammer 40k Tyranids Tyranid Ripper Swarms(wT9) Unpainted. Sold as seen. To View the following images. Internet Explorer users can Left Click and Drag ... morethe image to the Tabs Bar to view the image. Firefox Users can Right Click and select View Image. Combined postage is available if you purchase more than one item from AA-Wargames. Please check the"Postage and Payments" tab for information on the Combined Shipping status of the item you are interested in. Please aim to pay within 7 days. For UK purchasers paying by cheque. I will wait for it to clear before despatching the items. Where'PPR Basecoated' appears in the item description it means that the model has been Previously Painted and Resprayed. Where'PSR Basecoated' appears in the description it means that the model has been Paint Stripped and Resprayed. Please note- The first gallery image contains the whole item that is available in this auction. Any subsequent images are smaller parts of the auction lot. Or the auction lot from a different angle. Please refer back to the first gallery image for an image of the item or items available in this auction. Due to significantly increased prices by Royal Mail we have had to increase our postage prices. However Royal Mail have widened their weight banding so we have reduced our combined shipping rate down to 25p and also increased the number of items that can be combined. To include smaller vehicles. Unfortunately all larger vehicles/models will remain outside of the combined rates. We have also been able to decrease the despatch time as Royal Mail will now collect our outgoing mail more regularly. As of the 5th July 2013 customers from the Russian Federation will be required to pay an additional £6.00 postage for items to be sent via the Royal Mail signed for service. If you have purchased from the Russian Federation please request an invoice before paying. Due to large increases in the number of packages being claimed as lost. All packages over £70 in value will be required to
$
2,500
Buy It Now
$0 Shipping
Condition: New
Location: Woodbury,NJ,USA
$
2.88
Buy It Now
$0 Shipping
Condition: Used
Location: Evansville,IN,USA
$
159
Buy It Now
$7.9 Shipping
Condition: Used
Location: Saint Petersburg,FL,USA
$
7.99
6d 14h 54m 9s
0 bids
$11.99 Now
Free Shipping
Condition: Used
Location: Burlington,WA,USA
$
4.49
Buy It Now
$0 Shipping
Condition: New
Location: Oxnard,CA,USA
$
1,000
Buy It Now
$0 Shipping
Condition: Used
Location: Laotto,IN,USA
$
4,750
Buy It Now
$0 Shipping
Condition: Used
Location: Cross Plains,TN,USA
$
1,800
Buy It Now
$0 Shipping
Condition: New
Location: Miami,FL,USA
$
2.87
Buy It Now
$0 Shipping
Condition: Used
Location: Grapevine,TX,USA
$
1,000
2d 6h 29m 43s
0 bids
$120 Shipping
Condition: Seller refurbished
Location: Chicago,IL,USA
2009 SE Bikes PK Ripper Looptail Old School BMX Bike New* MSRP $830 Buy It Now $699. + FREE SHIPPING! It is possible that some items sold have been the ... morefloor model and may be subject to scuffs. Slight discoloration and/or dust. In particular with light colored handlebar tape/grips, tires or saddles. We will do our best to clean them up before shipping.
$
1,500
4d 9h 2m 9s
0 bids
$150 Shipping
Condition: New
Location: Belvidere,IL,USA
$
1,358.39
3d 3h 40m 42s
9 bids
$66.59 Shipping
Condition: New other (see details)
Location: United Kingdom
1 NOS factory 1985 86 original pk ripper sealed decals. Early 2nd gen PK ripper 1980's era. Extremely hard to find OG SE racing decals. These can't ... morebe found at all. Shipping within the USA and Canada will be about $15.00. This Shipping cost covers actual postage with tracking. Any packing supplies i have to purchase, local tax and $100 of Insurance coverage. Insurance will be about $1.80 for every $100 of coverage on top if wanted. If the shipping and packaging is a lot less. i will refund. If its a lot more i will present you with options. If its a little bit more i will cover it. I'm NOT profiting anything from the shipping and packaging cost. My care& time in packing is free. I'm located in Canada on the west coast. Overseas buyers please contact me for shipping costs and if i will ship to your country. shawn.paypal@gmail com
$
999
6d 3h 45m 50s
0 bids
$0 Shipping
Condition: New
Location: Buckeye,AZ,USA
$
2,499.99
Buy It Now
$199.99 Shipping
Condition: New other (see details)
Location: Miami,FL,USA
$
1,919.99
Buy It Now
$0 Shipping
Condition: New
Location: Manvel,TX,USA
$
2,499.99
Buy It Now
$199.99 Shipping
Condition: New other (see details)
Location: Miami,FL,USA
$
17.89
Buy It Now
$0 Shipping
Condition: New
Location: Brooklyn,NY,USA
$
600
3d 0h 11m 30s
0 bids
$125 Shipping
Location: San Francisco,CA,USA
2009 SE Bikes PK Ripper Looptail Old School BMX Bike New* MSRP $830 Buy It Now $699. + FREE SHIPPING! It is possible that some items sold have been the ... morefloor model and may be subject to scuffs. Slight discoloration and/or dust. In particular with light colored handlebar tape/grips, tires or saddles. We will do our best to clean them up before shipping.
$
3,100
Buy It Now
$0 Shipping
Condition: New
Location: Fremont,CA,USA
1 2 3 4 5 6 7 8 9 10
 In 

Past Items  
 
13 Spoons and 2 large pompano jigs These spoons and jig are sutible for inshore and freshwater. the first pis is the whole kit. the second pic is 3(1/2 oz) Cajun Thunder weedless spoons 3 inches one is gold one is silver and one is copper. all in good shape the third pic is 2 red ripper weedless spoons 1 silver(1/4 oz) and 1 gold(1/2 oz) the forth pic is a rapala minnow spoon the fifth pic is a#3 Krocodile with a teaser the sixth pic is four Krocodiles 2(1/4 oz) and 2(3/8 oz) silver the seventh pic is a swimming spoon jig you atach a trailer like a soft plastic jerk bait and it makes it swim through the water it is made by a local captain in south florida Picture only in the fisrt pic is a rare copper Krocodile with a florescent orange strip it is the only one I have seen I put a new saltwater hook on it. Also only pictured in the first pic ... moreare two new pompano jigs 3/8 oz bright yellow they are the same as walleye walking jigs only they have saltwater hooks. good luck bidding no international shipping.
You are bidding on a Sailworks RIPPER-2 3.3 Mast/Sail Bag. For 138cm boom length. The bag is in excellent condition and has NO problems or defects. See picture 3 for specs. Bag measures approximately: 55" I take PayPal. Shipping will be only $6.85 THANKS!
Luhr Jensen Ozark Mountain"6 3/4" BIG GAME RIPPER" Lure-New OLD STOCK in Box.AWESOME COLOR! GREAT LURE FOR YOUR COLLECTION! I will combine shipping.Please e-mail me with any questions before bidding.Shipping Cost will be $4.00 in USA.GOOD LUCK! CALIFORNIA RESIDENCE MUST PAY SALES TAX OR HAVE VALID RESALES LICENSE.Its Very important to us that this is a POSITIVE and FIVE star transaction for both of us.If there anything that is not up to a FIVE STAR rating please let us know before you leave feedback.
VINTAGE LUHR JENSEN OZARK RIPPER LURE REAR DOUBLE PROP SILVER/ BLUE TOP 3/8 oz NEW IN PACKAGE 11/1992 PACKAGE IS COMPLETE BUT FALLING APART AND BRITTLE NICE ADDITION TO A NYONE'S COLLECTION! I'LL COMBINE SHIPPING FOR MULTIPLE WINS Check out my! Be sure to add me to your!
Up for bids my SE BIKES" CROOKS PK RIPPER" 49CM.EXCELLENT CONDITION. FLIP FLOP REAR HUB.FIXED ON ONE SIDE FREEWHEEL ON THE OTHER. RIDDEN LITERALLY A COUPLE OF TIMES. HAS A SLIGHT SCRATCH ON HANDLE BARS. ON THE RIGHT PEDAL. AND NEAR REAR OF FRAME.BARELY VISIBLE. AS ALWAYS WITH ME THIS IS A CONTINENTAL U.S.A. AUCTION ONLY. I SHIP ONLY TO THE CONTINENTAL USA ONLY NO EXCEPTIONS. NO ZERO BIDDERS. SOLD AS-IS NO RETURNS.PLEASE ASK ALL QUESTIONS BEFORE YOU BID! GOOD LUCK! HERE ARE THE SPECS: New 2012 model. We teamed up with Los Angeles-based streetwear brand Crooks& Castles to offer an extremely limited edition PK Fixed Gear in a never-before-seen colorway. It has the exact same spec as the PK Ripper Fixed Gear but comes in a limited-edition camouflage colorway in collaboration with streetwear clothing brand. Crooks& Castles. This ... morebike is extremely limited with less than 350 coming into the USA. Only 250 made. Very limited availability. Sizes: 49cm Color(s) Crooks Camo Frame: Compact Frame Geometry. 6066 Aluminum Floval Tubing, Internally Machined Integrated Head Tube, Looptail Rear End, Retro Dropouts& Gussets, All Sizes Can Barspin Fork: Cr-Mo Landing Gear. Butted for Strength, Accepts Pegs, 3/8” Dropout w/ Wide Tire Clearance Crankset: 3-pc Cr-Mo 8-Spine. Euro Sealed Bearing, 36T SE Bubble Sprocket Pedals: Odyssey Twisted Plastic Composite w/ Reinforced Crooks Foot Straps Chain: KMC Z410 Wheelset: SE Sealed Bearing High Flange Alloy Hubs. 36H, Fixed/Free w/ High Profile Double Wall Rims, 14T Fixed Cog& 14T Freewheel Tires: Kenda Keen 700x35c Brakes: Tektro R369 Dual Pivot Caliper F& R Brake levers: Tektro RX1.0 2-Finger F& R Headset: Tange Sealed bearing 1-1/8” Integrated Threadless Handlebar: Cr-Mo SE Racing Floval Bar. 26” x 5” Stem: Affix Strangler 6061 T-6 Alloy. Zero Degree Drop, 22.2mm Clamp Tape/grip: S1-E Dual Ply Retro Grip Seat: SE Lightning Boss Seat w/ Bottle Opener Seat post: 3-D Forged Alloy One Piece. Aluminum 27.2, Weight: 24.20lbs/ 11kgs(49cm)
RACE INC MINI BARS THAT MEASURE 19.5 INCHES END TO END. VERY NICE CONDITION AS YOU CAN SEE. NO MAJOR CRASHES AND THE ANNO IS STILL DARK AND RED. ORIGINAL STICKER SHOWS ITS AGE, BUT I LIKE THAT AND ILL KEEP IT THAT WAY, CHANGE IT OUT IF YOU WISH! PLEASE ASK ANY AND ALL QUESTIONS, CHECK OUT MY NOS TUFF NECK STEM IN RED ALSO! THANKS FOR LOOKING.
Please Note: I survived open heart surgery and 2 subsequent visits to the emergency room the past 2 years. It's still an uphill battle but I'v been putting some guitars. Other musical equipment, and various items up for auction to cover the hospital bills. I will be listing more musical instruments, guitar& drum parts, studio gear, and misc items thru January. so please check my other auctions. Up for Auction is a Rare Vintage 70's Univox Ripper Electric Guitar with Original Case. Cord, Bridge Cover, and Whammy Bar. It is in excellent condition for it's age. Check it out. And please check my other auctions by clicking this link:
1981 PK Ripper S/N: PK47803 with unstamped Landing Gear forks. Fame has some issues. Re-welded seat mast. Re-welded drive side chainstay with crack, hairline crack on brake bridge& drilled for kickstand. Unstamped Landing Gear are nice. Chrome is decent with a couple spots of missing chrome.
WHAT YOU ARE SEEING HERE IS PROBABLY ONE OF THE MOST RARE SE RACING BIKES YOU WILL EVER SEE. IT IS A BIG MAMA FLYER 29ER, THE PRE- BIG RIPPER MODEL, VERY FEW OF THESE WERE MADE, 2005 IS THE ONLY YEAR THEY WERE MADE LIKE THIS. AND WAS ONE OF THE ONLY MODELS TO COME FROM THE FACTORY WITH ALUMINUM FORKS. THIS FRAME IS ALUMINUM WITH DISK BRAKE AND CANTI BRAKE COMPATIBLE. AND CAN BE A SINGLE SPEED OR EQUIPPED WITH GEARS. EURO BOTTOM BRACKET, THIS FRAME AND FORK COMBO IS SUPER LIGHT. IT COMES AS SHOWN. FRAME, FORK WITH SEAT POST AND CLAMP, IT IS ALL ORIGINAL WITH ORIGINAL DECALS, SOME SCRATCHERS HERE AND THERE BUT VERY NICE WITH NO DAMAGE, OR REPAIRS I BELIEVE THIS IS A MEDIUM FRAME PLEASE DON`T HESITATE TO ASK ANY QUESTIONS YOU MIGHT HAVE THANKS FOR LOOKING
This is a rare bird! Early 70's Gibson Ripper Fretless Bass. Comes with an Epiphone rectangular tolex hardshell. Bass is great! It has the usual and expected dings and such.it's certainly been played. Not stored! But overall, pretty good shape. All the electronics work fine. Bridge is in good working order, not collapsed like a lot of these models tend to get. Neck joint is perfect and tight. Neck is in great shape, and the truss rod works perfectly. The neck will flatten out perfectly! This is a very cool players piece! Serial number is 020743 and stamped a Second. See all the pics below. We are a small. Service oriented, pro shop that has been in business for over 33 years. You can be assured we give accurate descriptions. And when you call us or email us you will get a real person on the other end who knows the gear and is willing ... moreto answer any questions you might have. We pride ourselves on our customer service. Shipping to anywhere in the continental USA will cost you a mere $40.00. We accept all major credit cards or Paypal. We will be glad to take a credit card payment over the phone. Please call us at 248 543-5070. If you live anywhere else in the world other than the continental USA please email us with your complete shipping address and we will quote you a price for shipping. International transactions must be conducted through Paypal. Auction winners must contact us within 72 hours to inform us of paying intentions and 7 days from auctions end to make payment. Customer must notify us with intent to return within 24 hours of receipt of goods. No exceptions. Customer has 14 days to return the item to us or the item will be refused by us. Customer is responsible for ALL shipping costs. There is a 10% re-stocking fee on all returns.
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! It is your responsibilty to read the auction entirely before bidding. A large percentage of our items are used and will not be in new condition. Pictures are of actual items and we do our best to describe each and every item. If you have doubts about an item either call us or emails us. Phone number is listed at the bottom of the auction ad. We are closed Thursdays and Sundays. Please click the pictures to view a larger version. Vintage SE Racing Ripper Brown Color BMX Bike 6061 Aluminum Frame 20x1.95 Rear You are bidding on a previously owned/used vintage SE Racing Ripper Brown color BMX Bike. This auction is for the bike you see pictured. Pictures are of actual item. I do not know that much about bikes so I did my best to picture it for you. Please use those to do as much research ... moreas you can. The frame is brown in color and is marked SE Racing Ripper 6061 Ripper. Forks are marked Landing Gear, Brake handle and rear brake is marked C Stan. Tires show their wear but seem to be holding some air. Size of the rear tire is 20x1.95 and the front is marked Tiandi 20x2.125. I hope you can use that to get the size of the bike as it is not marked anywhere on it. The bike shows its age/wear with scuffs, scratches, and some paint chip marks in the frame. Lots of dirt around the cog. The SE Racing Seat is torn/ripped up in the back portion of it. The bike has seen its fair share of use. The grips are worn with one being broken in half and has slid down to the inside portion of the handle bars. Those will need to be replaced. Serial number marked on the underside of the bike is ICSEL08476. Take your time to look at the pictures to get a better idea of the condition and what you are bidding on. Please take a moment to look at my other great auctions. Thanks ccloan Please Click to visit my other auctions! By placing a bid you agree to the Terms of Sale! Hours of Operation are from 11 to 5pm Monday- Friday. Closed Saturdays& Sundays. Payment Options: Credit Ca
HERE I HAVE A ONE OF A KIND NOS PK RIPPER. THIS BIKE IS AS NEW. PERFECT CONDITION.MINT. THIS PROJECT WAS JUST RECENTLY COMPLETED. REDLINE FLIGHT CRANKS. HUTCH BEAR TRAP PEDALS( GOLD ANODIZED CAGES) RE-ISSUE COMPETITION III TIRES. CUSTOM WHEEL PKG. ALEX SUPRA DOME CHROME RIMS.DOUBLE BUTTED STAINLESS SPOKES,RED ANODIZED NIPPLES, AND GOLD ANODIZED BOMBSHELL DOUBLE SEALED HUBS. REAR HUB HAS 3 PAWL SYSTEM FOR INSTANT ENGAGEMENT. GOLD ANODIZED BOMBSHELL CNC MACHINED BRAKE SET-UP. POLISHED SNAP STEM.VINTAGE NUMBER PLATE WITH THE#77(FIRST YEAR FOR PK RIPPER,1977) BIKE JUST TOPPED OFF WITH RE-ISSUE OAKLEY B1B GRIPS(BLACK ON BLACK EDITION) THIS IS BY FAR THE NICEST NEW-OLD SCHOOL PK BUILD YOU WILL FIND OUT THERE. I GET TONS OF COMPLEMENTS FROM ALL BMX FANS. GOOD LUCK! FREE SHIPPING FOR"BUY NOW' $70 TO SHIP OTHERWISE.48 STATES.
SquareTrade © AP6.0 I AM LETTING GO OF ONE OF MY SHOW BIKES. UP FOR YOUR CONSIDERATION IS A 1988 PK RIPPER FRAME AND LANDING GEAR FORKS. FRAME WAS POLISHED A FEW YEARS BACK AND NEW DECALS WERE APPLIED. FORKS ARE NEAR PERFECT. THIS SET IS IN ABSOLUTELY BEAUTIFUL CONDITION AND I WOULD EASILY RATE IT AT A SOLID 8.95+ OUT OF 10. FRAME HAS MINOR WEAR AND THE DROPOUTS ARE VERY NICE, NOT CHEWED UP LIKE MOST PK'S. THIS COULD BE BUILT UP AND COMPETE WITH THE BEST OF'EM AT ANY BIKE SHOW, I SHOULD KNOW. CHECK OUT MY OTHER LISTINGS FOR CORRECT PARTS TO FINISH THIS BUILD OR ANYTHING ELSE YOU MIGHT NEED. IF YOU NEED ANYTHING POWDER COATED ASK FOR PRICES. AS ALWAYS. PROFESSIONAL PACKING, U.S. SHIPPING AND DELIVERY CONFIRMATION ARE FREE. I PRIDE MYSELF ON GREAT CUSTOMER SERVICE AND UNBEATABLE SELECTION. THANKS TO ALL MY REPEAT CUSTOMERS AND ... moreWELCOME NEW ONES.
20" SE Racing PK ripper pro XXL TEAM frame 21.7 top tube I glass beaded the tail and head tube to match the decals. Its in good used shape with some normal scuffs& scratches. I was going to polish out the 2 sections but time is limited. Posted with
This is a 6061 aluminum Pro size SE Ripper frame that has 4 races total on it with the headset included. It weighs 3 Lbs 10 ozs with the headset. The toptube is 20.25 inches& uses the unique SE floval tubing as seen in the pics. This would be a great frame for building up from a jr or expert frame. It uses the Euro bottom bracket. It was bought new in October of this year for my granddaughter. She raced it 4 times. The only reason it is being sold is her team got a new sponsor this year& we swapped the frame out to theirs. This frame almost looks new with minimal scuffs/scratches as seen in pics. This frame alone sells for around $400. It is being sold with no reserve Posted with eBay Mobile Posted with eBay Mobile
PRE SERIAL. I BELIEVE IS A'79 OR'80 PK RIPPER. DROP OUTS IN GREAT SHAPE. SEAT RECEIVER IS NOT CRACKED. LOOKS LIKE BOTTOM OF FRAME HAS BEEN REWELDED. GREAT WELDING JOB. NICE AND CLEAN. GREAT ADDITION TO ANY BMX COLLECTION.
2012 SE Racing Ripper 20" BMX Bike- Bicycle- BLACK This auction is for a 2012 SE Racing Ripper 20" BMX Bike. This is a used bike and does show some wear and light scuffs and scratches. Overall the bike is in very solid condition. Please review the photos for condition. They are of the actual item you will receive. TOP TUBE LENGTH 20" SEAT TUBE. CENTER TO TOP 10.2" CHAINSTAY 14.4" HEAD TUBE ANGLE 74° SEAT TUBE ANGLE 71° WHEELBASE 36.4" SEAT POST DIAMETER 27.2 Good Luck! Shipping- Payment- Return Policies: We accept payment through Paypal only. Florida bidder must add 7.5% for Leon county. Fl Sales Tax. Please add Variable to Location for S/H TO THE CONTINENTAL US ONLY. We will only ship to the USA; no international shipping. We DO NOT accept" buy it now" offers(unless the offered is listed ... morein the auction) 14-day Satisfaction Guarantee: We sell mostly used items. For your protection all of our items are backed by our 14-day Satisfaction Guarantee; with the exception of As-Is auctions. If for any reason you are unsatisfied with your purchase. You have 14 days from the date you receive the item to return it along with a brief note stating why you are returning the item. Refunds will be issued for the full purchase price(not including shipping) and are typically processed within 2 business days. The refund will be posted to your PayPal Account. Feedback: Feedback is important to us and important to you. If you have any problems or concerns please contact us before posting a negative feedback. We do sell mostly used items and although all items are checked and tested before they are shipped; sometimes there are problems. We are willing to work with a buyer to resolve any issues that come up. Our business hours are Monday- Friday from 9am to 6pm EST. We will try to answer your questions or concerns as quick as possible but please allow appropriate time for a response. We do not answer emails at night or on the weekends. If you have any questions please email or call us a
I am selling my son's Ripper Jr race bike. He has moved up to an expert. Great starter Bmx racing bike. All stock parts. 3-piece crank, etc. Good condition. Here's the specs. Specifications Description Fork, 100% 1" Landing Gear Mini, Headset, FSA 1" Threadless Aheadset, Handlebars, Aluminum SE Mini Wing Bar. 22" X 4.5" Stem, SE Racing Mini. Front Load, 1" Alloy, Grips, Jr Size Kraton Rubber, Brake Lever, Tektro 317A. 2 Finger Alloy, Brake(s) Tektro 926AL Mini V-Brake. Slick Cable, Seat, SE Racing Mini w/ integrated Alloy Post, Seat Post, Integrated Aluminum 22.2, Seat Clamp, SE Racing Alloy, Crankset, Truvativ 3-pc Alloy. 155mm, Euro Sealed bearing, 41T Alloy, Chain, KMC Z30. Silver, Pedal, Wellgo Alloy Caged. CR-MO Axle, Rim, Alex VP-15F. 28 Hole Front, 32 Hole Rear w/ Black Stainless 14 Ga. Spokes, Front ... moreHub, SE Racing Alloy. Hollow Axle, Sealed Bearing, Rear Hub, SE Racing Cassette. Sealed Bearing, Alloy, Cr-Mo Hollow Axle, w/ 16T Cassette, Tires, Tioga Comp III 1-3/8" Pegs, Nil, Gyro, Nil, Extras, Race Pads. Race Plate, Colors, Ball Burnished Silver, Weight, 17 lbs. No international shipping. Shipping will be $25 in the USA. Local pickup is fine. Email with questions. Thanks.
AWESOME pair of w hite ACS Z rims in excellent like new condition! Spin true& nice. No brake ware. Front& rear with matching white hubs. Freewheel. Tubes, and new blue w/tan sidewall comp style Kenda tires included in sale. Perfect for that oldschool 1980's bmx build! You may never find another white pair this nice for this price. NOTE* All items described as accurately as known. Item ships worldwide. International bidders will pay additional shipping cost of($50 U.S. Normally ships within 48 hours of payment. Payment expected within 48 hours of sale. No partial refunds. Refund issued if disatisfied. And within 48 hours of item returned in same condition sold minus all shipping costs and eBay seller fees incurred, and non-refundable.
2008 Retro PK Ripper.In exellent condition,ridden only a few times then placed up on the wall.Has Profile cranks,sprocket and neck,and SE rims.The pictures tell tell it all. any questions feel free to ask. The bike will be carefully packed and shipped partially disasembled.There is NO reserve on this bike. will ship to canada for additional shipping cost.thanks and happy bidding!
Up for sale today is my beautiful 1986 SE Racing PK Ripper Old School BMX Race bike. Bike is documented on the BMXMuseum.com website. This is a super light and fast race bike. And it gets a TON of looks wherever I take it. It is hardly ever ridden. Just once in a while up and down the street. This is an Aluminum Frame and has a beautiful new White Paint job on the frame and LUNG fork. There are a couple of scuffs here and there in the frame that are underneath the paint on the underside of the bike and a couple on the chain stay. The serial number is also painted over and cannot be seen. THIS BIKE WAS ALREADY COMPLETELY DONE WHEN I PURCHASED IT. WITH THE EXCEPTION OF THE RED LETTERING. I have done my best to show the extent of the scuff marks as best I could. You really can't see them unless you flip the bike over. Bike has a lot of great ... moreold/mid and new school parts on it as well! Lung chromoly fork. Cycle Pro Red Anno V-Bars, brand new headset, AME Grips, Profile Racing Pro XXL Stem, Shimano bent Anno blue brake lever, Odyssey Pitbull Rear Brake with Rush Pads, Sun Rhyno Lite wheels with super smooth new school FMF Hubs, new Panaracer Mach SK Tires, Bikeway Aero Saddle(a couple of small scuffs on rear sides) Chrome layback post(unsure of brand) Sakae FX SLP 3 pc Cranks(there are a few scratches on the spider and crankarms) with a Pro Neck 44T Sprocket, Yunnex Alloy chainring bolts, SR Custom M pedals in decent shape. Decals are completely hand cut from Red vinyl with non permanent adhesive and can be removed easily if you would rather get factory replacements. This bike is being sold as is with no returns! Continental USA Bidders ONLY must ask any and all questions before bidding on this bike. I will do my absolute best to answer your questions accurately and quickly. I will also be happy to send detailed photos of any area of the bike you would like to see specifically. NOTE: THIS BIKE IS ALSO LISTED LOCALLY AND IF IT SELLS BEFORE A BID IS PLACED THIS AUCTION WILL BE CANCELLED WITHOUT NOTI
Vintage se racing pk ripper mini. Amazing original polished aluminum condition with zero repairs and no need for repairs. No dents or dings either! Dropouts are amazing as it has always had correct frame washers installed. Serial number on right rear dropout reads MR53861. Posted with
1995 GT Pro Series Team Model W/ XLE stamp. All origanal accept for tires and seat. Chrome on the bike is very nice and shines like crazy. The decals are all nice and everything works. The grips are a little faded and one bar end is missing. The Chrome on the Araya wheels is flaking off and GT hubs have peeling chrome. Rest of the bike is super nice. I just recently had it at the bike shop getting new brake cable. Wheel bearings and neck greased and adjusted. IT rides and stops amazing and fast is an understatement. If your looking for the ultimate Rider, Racer, Midschool bike this is it! TT is 21.5(i'm pretty sure) and this bikes fits a big rider comfortably. Contact me for any further details or pictures. Posted with
170mm GENTLY USED TAKAGI CRANK SET. THREADS AND TAPERS ARE FINE. TANGE SPINDLE AND BOTTOM BRACKET INCLUDED. NO BEARINGS. NICE DUST CAPS ASWELL!
This is a super nice looptail pk ripper from the early 1980's. Comes with the forks that are original to the frame. 1" threaded. Non stamped landing gear. Rare set considering its a survivor and has had zero rewelds or repairs. Seat post has light marks and isn't cracked. Dropouts also have light marks but since washers were used. Aren't bad at all. See pics and feel free to ask any questions. Again, no paint or powder hiding anything here folks. Just polish and clean her up for an old school gem. Posted with
P. K. RIPPER Frame. From the 1980's. Frame is Super light! This frame is not perfect. It was raced in the 1980's since then its has been collecting dust. A few re welds were done on this frame. Please read above condition description. Serial number is PK 33668. No Reserve. I took 12 pictures of this frame so you could see it from several different views. See all 12 pictures for details. Any questions ask before you bid I will do my very best to answer each question in a timely fashion. No international bidding. I ship and sell to the U.S.A. Paypal only. Payment expected within 3 to 5 days of auctions end. Item will be carefully packaged and sent by USPS to the location you have provided ebay. Please read bottom statement before bidding. Note: Shipping is based on the longest distance from my location. Shipping cannot and will not ... morebe negotiated after the purchase. Thank you. Note: I no longer can accept refunds. This is due to dishonest and fraudulent ebayers. Thank you.
Old School Bmx Hutch Mini Pedals. 9/16. Urchins cages. Chrome shows peppering.
PK Ripper frame. It appears to be an early 90s frame. There is no Cracks. Repair welds, Dings or bends in the frame. Only Flaws in this frame is typical nicks and scratches. I will be adding the serial number in the auction soon. I will include V-Brakes if you request them for free Please if you any questions or need more pics please ask. Thank You and happy Bidding
This auction is for the SE Ripper X that is shown in the pictures. This bike is a complete bike ready to race. I am selling this because we have out grown it. My oldest son and I bought the frame and custom built this bike to make it extremely light weight. We spent almost 1100 dollars on this when we built it. It is used has been raced so has scratches and bruises on it. None of the damage makes it unsafe or unusable just cosmetic. Don’t get me wrong still in good shape just letting you know it is used. The front tire is in great shape. Of course. The back tire holds air but is pretty worn out so a new one should be installed pretty soon. I was just looking at it while taking picture and I noticed the brake lever is broke as well, these are both easily fixed and kids like to add components to personalize their bike anyway. I will list all ... morethe parts that are on it below. OK now for the fun disclaimer part. It is a used race bike that has been used so I am selling it as-is. You are getting everything that is bike related in the picture except the number plate. It will be slightly disassembled for shipping. IT IS NOT NEW! Thanks for looking ask any questions and I will gladly answer. Been on eBay for a pretty long time and as you can see I will ship quickly. There is a reserve as I really don’t want to give it away. It is not a crazy reserve just a reasonable reserve. I look forward to shipping this to a new family that can enjoy it as much as we did. Thanks Chet. Alex DA22 wheel set with GT hubs· Sinz crank set and bottom bracket· Uni one piece seat and seat post. Sinz stem· FMF bars· TektPro brakes· Sinz 1 1/8 threadless head set· marchozzi suspension bmx stem lock(keeps threadless forks tight) Blue carbon fiber bombshell forks On Jan-24-13 at 20:52:19 PST. Seller added the following information: Ok I forgot a few things so I will add them now. Hubs have sealed bearing the total weight is around 17 pounds. The crank arms are 175. And the rear hub is a cog not a free wheel. Chain ring
1976 Gibson L-9-S“THE RIPPER” Bass My first album as a kid growing up was KISS–Destroyer. When I got into guitars and basses. It was not long before I found out Gene Simmons played a Gibson GRABBER back in the 70’s. I got my first Grabber about 9 years ago. Once I got a taste of the Grabber. Naturally I had to try a Ripper Bass. There are two distinct differences in the two models and there is a reason the Ripper you see here is a more valuable piece. Keep Reading… This auction is for my 1976 Gibson USA L-9-S“THE RIPPER” Bass Guitar. The L-9-S bass was introduced in 1973 by Gibson and in 1974 they renamed it THE RIPPER. When I happened across this bass. I called our friends at Gibson and had a nice talk about it. You can see from the photos that the rear headstock has the L-9-S model above the serial number 00156345. The pots date to 1975 ... moreand 1976. How could that be? I asked them. I am pleased to say that is 100% accurate. Gibson still used the model number L-9-S on the rear headstock even though they had re-named the bass publically to“THE RIPPER” They added the“RIPPER” Truss cover from 1974 on. We all agreed this bass was manufactured in 1976. Having Pots from mid 1975 and early 1976 in this bass is absolutely consistent with the era. THE REAL DEAL. HOLYFIELD! Fashion was a little different when this Gibson Ad for THE RIPPER came out. Great photograph to bring you back when the world and music was much different then today. THIS IS A GENUINE 1976 RIPPER BASS! This one shows very nice overall. I put some photos above with the tip of a pen showing light checking. Dings, dents and scratches. Let’s remember this bass is about to turn 37 years old soon. THIRTY SEVEN YEARS OLD? Wow! Where were you 37 years ago? How old where you? Where you born yet? Exactly my point. Put this into perspective. What is going on in the world? Jimmy Carter is NOT YET President of the United States. Wosniak and Jobs start a little garage company called Apple Computers in April 1976. The Ramones release their first album
Amazing Board! Comes with free paddle(It's an adjustable one but the adjustable piece got lost in the water- made makeshift one out of medal so you should be able to work something out to make it the right height for you but will take a little work. I'm 6'0 and its the right length for me) Perfect for riding waves. Anything from ankle to Way overhead if you are experienced. For beginners: this was my first SUP and it took some learning. By my second session I was able to start catching some waist high waves but took some practice to get good. With just a little patience this board will be a great first board I'm charging $300 to ship but if when I go to ship it costs me a lot more than that I will have to charge you/ cancel the order.
Rare old school Boss BMX 3 piece crank set. 180 mm arms. Sealed bearings. Boss chainring. Haro sprocket. Odyssey triple trap pedals. Pedal cage are pretty beat up but still work fine. Cranks are in nice original condition. Missing 1 bolt that attaches arm to the spindle. Check out my other auctions! Getting rid of some of my old school Hutch and Boss parts. Posted with
Awesome bars these are either PK Ripper bars or Race Inc. bars light alloy and in awesome condition 22 1/2 inches wide free shipping!
This auction is for a 90's(95? 20" stamped PK RIPPER. Aluminum finish with white/grey decals.Threadless Landing Gear. Shows some normal rider ware. No bends. Cracks, dents, or re-welds. Comes with black SE neck, black SE seat post, blue/white SE seat, black clamp, matching chrome bars in great condition. black/blue Oakley grips, two tone nickel chain, black/blue/sil 2 piece cro-mo crank, new ano blue black KKT style pedals, like new awesome oldschool 80's heavy-duty blue CMC rims that alone sell for over $200.00 if you can even find them-with blue/tan gumwall comp style Kenda tires. Cool bike. Thanks for looking. All items described as accurately as known. Item will normally ship within 48 hours of payment. Payment expected within 48 hours or seller reserves the right to re-list. Item ships worldwide. Buyes outside continental ... more48 U.S. states will pay additional shipping charge of $100.00(U.S. No partial refunds. Refund may be issued within 48 hours of return in same condition sold minus any shipping costs. And final eBay seller fees.
For auction is a set of VINTAGE GIBSON TUNERS. These were pulled from a 1981 gibson grabber headstock. They are 100% complete. Original, and functional. They come with all 16 screws and brass rings for headstock installation. Turn nicely and look great. Should fit on a number of vintage gibson basses. INTERNATIONAL BIDDERS. PLEASE CONTACT ME REGARDING SHIPPING BEFORE YOU BID. THANK YOU!
Here is a nice 80's Race Inc frame that is blue powder coated. Frame doesn't have any repairs and dropouts are perfect. The powder is slick on this frame. But it shows like stress marks where cups were installed in bottom bracket and neck. Also some marks on hope tube and seat post clamp. I purchased this frame the way you see it. It displays nice. Thanks Posted with
Auction is for a great little racing bike.SE RACING lit pk ripper pit bike.I bought this about 7 years ago for my boy.Never jumped only ridden by a 5 year old.He only road it about 4 or 5 times.We took it to a os bmx shop had some pros sign it SCOTT B.EDDIE F,WOODY I.They put some s&m bars on with ANO grips and profile seat clamp to top it off.What a different ride it made.After that it he never used it angin.Hop it finds a kid that will enjoy it.Thanks for looking and good luck. Posted with
A dying breed and what many bmx collectors are looking for. They are rare and getting harder to find. Ok now the specifics about the bike. Serial number is pk 70615. I am not sure what kind of handle bars are on it they might be p.k ripper bars. NOS p.k ripper pad set,NOS AME grips,OS DIA-COMPE MX-1000 back brakes, NOS GT Neck,NOS Viscount aero seat,NOS seat post,OS Suntour seat clamp,NOS claw pedals,OS 2 piece GT cranks,OS TUFF WHEEL II rims,FSC chain,Landing Gear stamped threadless forks,OS 7 STARS tires, dice tire caps. The bike has not been power coated I kept it in the same condition. I bought it in. Their are no rewelds on the frame the dropouts are in good condition with a few scratches. It does not come with the bike stand. The frame has a few gouges and scratches also. For the bikes age it is. In very good condition. SHIPPING WILL ... moreBE 75.00 DOLLARS. NO INTERNATIONAL SHIPPING. PAPAL ONLY NO REFUNDS. GOOD LUCK BIDDING. Posted with
Big Ripper! Old School Up for bid is one of my favorite posessions. It is my SE Racing Big Ripper. Total old school flare with new school ride! If you are a fan of 80s music and old school BMX.I will be willing to part with one of my favorite little gems to the right buyer. It is a true 29r/700c I have rode this thing around the neighborhood. At campgrounds, and on the boardwalk. Everywhere I go this thing draws all kinds of attention and small crowds.especially from old school bmx-guys like me. I really really really hate to let this thing go.but am in need of the $. The bad: It has some very minor little dings/scratches to the paint(the worse of which I included in the photos) It also has been collecting some dust. You can see it in the photos. I didn't bother detailing this before the photos. Yes. I do frequently detail my bikes. Otherwise ... morethis thing is in great shape. Changes from stock: I changed the seat to a soft blue seat that is super comfy and looks more old school. It will come with the original seat. I changed the tires from the oversized beach cruiser tires it came with to an old school gum wall type tire(tried to mimic the old Comp III tires we tore around town in the 80s) I still have one of the original beach style tires if the winning bidder wants it. I swapped out the lame pedals with Hutch-style cage pedals.No they are not true Hutch brand cage pedals( Those things cost half as much as this whole bike) I chemically stripped the brake lever and brakes and repainted them with transparent blue paint. The originals were silver and black. 8P I just put brand new grips on this thing that are exactly same as the ones that came with the bike. They tend to get dirty fast. Because they are white. And. I put some aluminum grenade tire caps on it. I know this seems like a freakin ridiculous amount to pay for this. This is more than I paid for it.I admit. But again. I really do not want to let go of it. If I get a grand for it. Then I will part with it. If not, then I get to ke
Here we have a vintage 1985 PK ripper with the following: 90's profile cranks. Power lite spider, power lite-power bend bars, new a'me grips, NOS GT zipback seat post, and a NOS Viscount dominator unstamped seat. Also comes with vintage metal flange tuff wheels which had coastal breaks converted with NOS free wheel kit. Wheels are in great condition, just a little dusty. No cracks or gouges(nice wheel set) Comes with new Kenda Skin Wall Comp 3's, and new tubes. Frame, forks and bars have fresh powder coat. Forks are not first generation landing gear, but second generation with SE Logo's shaved down. Drop outs are perfect. Frame has a ding in the right side chain stay as pictured(photo 7) In picture#8. You can see drop outs are pinched. Also comes with new SE racing pad set, never installed. Comes with new Tioga Bear Trap 2 ... moreheadset. Local pick up is cool.
OLD SCHOOL BMX NUMBER PLATE FROM THE EARLY 80'S. ALL STICKERS ARE ATTACHED. GREAT SHAPE. NO CRACKS.
VINTAGE TORKER BMX PAD SET YELLOW. ORIGINAL THREE PIECE PAD SET FROM THE'80S. NO REPLICA. VELCRO IS ALL IN GOOD SHAPE. NO SEPARATION. VERY NICE OLD SCHOOL PAD SET!
of my 2009 se fixie is the seatpost 27.2 seat and seatpost clamp.
Used SE"Ripper X" BMX racing frame. Shows signs of use( see pics) But in perfect riding condition. Frame only. I ship fast! Same day if payment received by 2pm CST. Please feel free to contact me with any questions. Posted with
For your consideration. I have an early 1980's Kuwahara KZ-1 barn find surviving bmx bike for sale. This is in good restorable condition for the age and is in surviver condition. From the little bit of research that I did do on this frame's serial number it looks to be an early January of 1981 Tange built frame. Serial Number T1A1109. If the date built is an important bit of information please do your own research as well and compare it to mine. This bike has anodized gold Suntour brand components. Kuwahara KZ-1 Frame and Fork(Red) V-Bars Tig Welded(Chrome) Redline? UKAI Rims(Gold) Suntour Hubs(Gold) Suntour Stem Gooseneck(Gold) KKT Lightning Pedals(Red) Suntour VX 3 Piece Cranks(Gold) Fluted Aluminum Seat Post(Gold) Dia compe MX1000 Brake I have set the asking price at $1300.00 with $50.00 shipping with in the United States. I am ... morepossibly open to serious reasonable offers. I am possibly willing to ship outside of the United States but the buyer must contact me prior to purchase. Must cover all shipping costs, must have insurance and tracking number. I have not attempted to restore this bike in any way. All I have done is clean off the rafter garage dust with warm soapy water and there is still some left. I did notice one ding on the rear left upper chain stay. This is being sold 100% AS IS. What you see in the pictures is exactly what you will get. If you have any questions or concerns about this old school Kuwahara please contact me and ask before bidding. I will try to answer any question you might have. GOOD LUCK AND HAPPY BIDDING! THANKS FOR LOOKING! P.S. If you know any details that I should add to my action please inform me. I am always willing to learn and upgrade. DONT FORGET TO CHECK OUT MY OTHER AUCTIONS!
2010 retro Pk Ripper looptail gold n brown. The bike is pretty much like new with all factory parts + factory pad set& NEW BLUE compIII tires(I will throw in the originial black with gummy sidewall compIII's as well) I will consider shipping if you want to pay for it. No idea how much it will cost though. SPECS: 6061 Aluminum Floval Tubing. Looptail Rear End, Retro Diamond Shape Dropouts, Limited Edition& Individually Numbered. 20.5" toptube measurement. SE 3-pc Cr-Mo. 180mm, 48 Spline Sealed American, 44T Alloy Crank. Tektro BX-310 V-Brake. Slick Cable, Skyway Brake Pads. Alloy Precision Sealed Bearing Alloy Hubs. 16T Freewheel. SE S1-E Retro Grips. X-Pedo Low Profile Platform pedals w/ Removable Pins. SE Lightning Blitz Seat w/ Bottle Opener! I'm 5'11 180lbs and the thing fits me well. Everywhere I ride this bike. ... moreIt turns heads, people have actually yelled out to me PK RIPPER! on several occasions. This BMX rulez. Get this limited edition BMX for a steal. Asking $600 obo. No low ballers. I dropped the price to $575. And that's pretty firm unless you can convince me why this bike would be worth any less. If you're checking this thing out. Then you know what it is. Hit me up anytime! Ill shoot you an email back right away.
I have for your consideration an old blue bmx frame. I am okay with restoring this for my own personal collection but I have way too many irons in the fire as it is. I can't afford to keep everything cool for my own personal hoard. So I am willing to give someone the chance to talk me out of it. I believe it is an early Race Inc that some how found its way under a set of"FMF" decals back in the day. It looks like someone stamped"7195" in the bottom bracket because from my understanding there is not a serial number on these frames. This frame does have a cracked seat mast, slightly over tightened rear brake, drop outs are chewed a bit, and it looks like the drive side crank arm rubbed the frame at some point. In my opinion this frame is in pretty good restorable condition. Please make sure that you review all 12 pictures ... moreclosely to make sure that this frame is everything that you are looking for in your next build. If you have any questions at all please make sure that you contact me and ask prior to buying/bidding. THANKS FOR LOOKING EVERYBODY! Posted with
Up for auction is a Very nice 1979 The Ripper Gibson Bass. This bass has been taken care of. It has a little belt buckle wear on th back of it. The pickups sound very nice and worm. Great attack on the treble side of it. And warm and mellow on the neck. Very low action all the way down the neck. Comes with nice case. Just a great vintage bass. No wonder Gene Simmons loved this Bass. Don't Miss it!
You are bidding on a rare used Slingshot Ripper mountain bike suspension shock frame set Size is 18" medium) Color is matte black 1-1/8" headset required(not included) 27.2 seat post diameter International disc and cantilever mounts. Replaceable derailleur hanger Direct mount front derailleur required(not included) Item exhibits signs of light cosmetic wear from normal use. Please ask all questions before bidding. No returns. Paypal payment required within 24hours of sale. Thanks!
Up for sale is a SE Racing 2010 Big ripper original pad set and seat. They are in great cindition. Just needs to be cleaned. No rips or tears, low miles on them
ONE 2011 SE RACING BIG RIPPER GOLD 1 1/8 STEM. THE STEM IS LIGHLY USED.
This is a Univox Ripper. Strat copy. Made in the 70's. This guitar really smokes. Great playing ride. Frets in great shape. No issues! Very clean. Original hard case! Shipping is free. USA auction only. Payment via Paypal only. Thanks!
This is a Univox Ripper. Strat copy. Rare white version. Made in the 70's. This guitar really smokes and has just been set up professionally. Has Major upgrades! New Grover tuners! There are some checks in the old paint. Frets in great shape. No issues! Very clean. Non original hard case! Bridge pickup has been swapped for a Rio Grande Phat Bastard P-90(fits a humbucker route) Shipping is free. USA auction only. Payment via Paypal only. Thanks! 3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fud.ro77%2861m25%3E3-13c96f8b0bd-0x10a-
Up for sale is a Gibson 70's The Ripper Bass Violin Burst bass guitar that need parts. The serial number is 129514 and below the serial number have a stamp Made In USA. There is not neck repair crack and other repairs on the bass guitar. Truss is 100% in working condition.It comes with 4pcs original machine head/tuners ferrules and original Gibson decal.All you need is the original parts to fix on it and it will worth around $3 to $4k in the market.Sold as is,any question ask. Posted with
1998 GT pro series Used excellent condition normal wear no dings dent or rewelds. Clean. Rolls smooth. Good luck thank you for your interest. Feel free to ask questions Posted with
Up for sale is a Gibson 1970's The Ripper Bass truss Rod Cover Plate.There are some chips and missing plastic on the two truss rod screw holes as well as some scratches on it. Sold as it. Any question please ask. Posted with
Old school bmx original cw cruiser bars. 28" wide hard to find real ones these days. Chrome is nice and decals original. Publicado con
Has been welded needs to be filed and finished any questions email me glad to answer them serial# pk37118 There are 4 welds on it. Rear forks each fork 1 weld on each side Rear brake mount 1 weld Rear bottom loop 1 weld Not a bad frame since welded just has to finished filed sanded etc. little TLC I don't have time for the project Posted with
vintage bmx mini uni seat and post. 7/8 post Posted with
Thanks troops for everything. We love. Appreciate, and pray for you and yours! God bless you and our great nation! Hi and thanks for coming to my site to check out my vintage SE Racing VELO seat. This came off of an SE RACING HENDERSON HAULER that had sat in its original box since the mid 80s. The box was recently opened. The bike was put together, and displayed for about a year or so. The seat is in very nice condition. Below is a photo of the other bike parts I will be listing today from the same bike. Please ask any questions BEFORE bidding. Thanks again. Cyber-Sales
here we have a 2009 limited edition pk ripper retro im going to be moving and need to get rid of this bikes in great condition paint has some chips but not many i went through this bike and clean it there is not a spec of dirt on it anywhere i just put new tires and grips on. bike does not come with pedals if u have any other questions feel free to ask bike is listed for sale other places i ship usually same day or next thanks for looking shipping only lower 48 states Posted with the
This is a 1982 looptail pk ripper with non stamped landing gear forks. This frame has had a repair at the gusset where it meets the loop. It was a minor crack and it was repaired professionally( see last pic) Other than that. This set is real nice. The dropouts, seat tube and brake bridge are minty. The threads on the forks have a couple minor marks but I threaded a head set nut with zero issues. No reserve auction. Oh yeah, the fork only has landing gear decals on one side. The other side didn't come off the backing well so I chucked them. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb%3A%60%3E-13ca873ac3b-0xff-
Biography Every life has a story Biography Magazine October 2001. COVER STORY Cover Story: The Mystery of Anthony Hopkins He's enigmatic. Guarded, and incredibly skilled at playing tormented characters from Captain Bligh to Hannibal Lecter. This month he opens in a Stephen King thriller as a strange old man with special powers. What makes Anthony Hopkins tick? By Sheryl Berk. Photo Album: Play Time! Before They Were Stars. These Celebs Took Their First Bows on the School Stage Tom Hanks in South Pacific? Meryl Streep in Oklahoma? How about Seinfeld's Michael Richards in The Wizard of Oz? If you ever wondered how your favorite stars began their careers. Here's a look at some very famous faces as high-school performers. Experts School Shootings: An Expert Explains How to Stop Them What could make a youngster so desperate. Frightened, ... moreor angry that he would bring a gun to school and deliberately shoot other students and teachers? And how can we stop these tragedies? Noted social psychologist Elliot Aronson offers answers. By Janet Cawley. Celebrities: Laura Dern: Life on the Road Less Traveled This is Laura Dern's year: After last summer's Jurassic Park III. She has three more films set to open between now and Christmas. More important, she and singer/songwriter Ben Harper are looking forward to a major life change: a new baby. By Michael Sauter. Afterlife Tombstones In this month of ghosts and goblins. We present our fifth annual selection of tombstones of the rich, famous, and infamous. Check out the final resting places of everyone from Laura Ashley to Lucille Ball, Coco" Chanel, and Mickey Mantle. By Gregg Felsen. Personalities: A Capital Gal: The West Wing's Janel Moloney As smart and sassy White House staffer Donna Moss. Janel Moloney is a politically astute professional in a high stakes world. But what viewers of The West Wing really want to know is whether she and her boss. Josh, will ever get together. By James Greenberg. Health: Prescription for Hope: Dr. Eric Winer on New Ways
Crupi Aluminum Pro Stem Crupi machine tolerances are so precise that each stem fit is nearly perfect which also makes for stronger clamping. Careful thought and precise machining is why our stems are superior! 6061 T-6 CNC Machined 52mm reach Polish Posted with
Nice used ripper x expert frame comes with landing gear forks.Head set, seat,post, and clamp Posted with
NOS BMX RAT TRAP PEDALS 1/2" FOR OLD SCHOOL BMX/VINTAGE MONGOOSE MOTOMAG PK RIPPER Old School BMX 1980's- NOS Rat Trap pedals. 1/2" thread for a 1 piece crank. Red candy coated/ano. They have just busted out of their original packaging due to handling. They are in great condition with some storage marks. Check out the pictures. AS PICTURED* What you see in the pictures is exactly what you will get. Please do not bid unless you intend to buy. Payment must be made by PayPal within 24 hours of purchase. Postage and handling: Australia = $10.00 Worldwide = $20.00
Here is an early SE Racing PK Ripper 20" bmx loop tail frame with an early non stamp Landing Gear fork and headset. This frame is in pretty good shape besides the fact that the non drive chain stay broke at some point and someone repaired it quite beefily and it is now much stronger then it ever was. If you look at the pictures you will see where it had broke and the welding and support bracket that was added to not only repair it but make it stronger and better then it was. The fork is in good shape shows a little rust but nothing that wont clean up. So I know this is a repaired frame but it is fixed and very buildable/ridable and there are no other dents. Dings or cracks. Good luck I will ship internationally so contact me for prices.
Here is an early SE Racing Floval Flyer 24" bmx cruiser loop tail frame with an early non stamp Landing Gear fork and headset. This frame is in pretty good shape besides the fact that it has had some welding repair around the seat post tube where these frames are known to crack. This welding has fixed this and probably will prevent any cracking from happening again in that area. If you look at the pictures you will see the welding that has been done. Also there is a crack at the top and bottom of the brake boss and if you look at pic 9 you can see the two cracks one on top and one on bottom. The fork is in good shape. So I know this is a repaired frame but it is very buildable/ridable. Good luck I will ship internationally so contact me for prices.
Black early 80's California Lite Perry Kramer PK Ripper pad set. Excellent condition. The stem pad is a Johar. I accept returns. Satisfaction guaranteed.
UP FOR AUCTION ARE THESE TEAM MONGOOSE SUPERGOOSE FORKS BMX OLD SCHOOL THEY ARE USED BUT IN NICE CONDITION THEY WERE CANDY RED PAINTED THERE ARE SOME SMALL ISSUES ON THE CHROME UNDER THE RED PAINT(LIKE CHROME STARTING TO PEEL) THREADS ARE OK AND STEER TUBE IN NICE CONDITION THERE IS ONE LEG DECAL MISSING.JUST ONE PRESENT DONT LET" EM GO AS OLD SCHOOL ITEMS ARE GETTING HARDER TO FIND EVERY DAY SHIPPING WORLDWIDE IS AVAILABLE(ASK FOR RATE) PLEASE ASK ANY QUESTIONS BEFORE BIDDING THANK YOU FOR LOOKING AND GOD BLESS.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fv%7F.rpn30%3E-13cb6c28964-0x106-
UP FOR AUCTION ARE THESE YELLOW SKYWAY BRAKE PADS BMX OLD SCHOOL THEY ARE BARELY USED BUT IN NICE CONDITION. COLOR IS A LITTLE BIT VANISHED DUE TO TIME AND AGES SUITABLE FOR ANY OLD SCHOOL BMX PROJECT DONT LET" EM GO AS OLD SCHOOL ITEMS ARE GETTING HARDER TO FIND EVERY DAY SHIPPING WORLDWIDE IS AVAILABLE(ASK FOR RATE) PLEASE ASK ANY QUESTION BEFORE BIDDING THANK YOU FOR LOOKING AND GOD BLESS
Welcome To My Auctions CHECK MY AUCTIONS I HAVE A HUGE BMX BIKE COLLECTION IM SELLING. MANY ITEMS. You are bidding on a 1986 Haro Freestyler Sport Odyssey Gyro Cables. these are for the rear. One of them still has original sticker. Master Team Group 1. If you have a question please ask. Please look at the pictures. Check my other auctions I have 10.000 items to sell. Check everyday for new items. We will combine shipping on multiple auctions/purchases that you make with us on a single calendar date. We also reserve the right to REFUSE to combine a purchase if the package would be to large or heavy. ITEM MUST BE PAID WITH IN 4 BUSINESS DAYS unless other arrangments are made. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Aa%60bac%3E-13cc05ba7e7-0x100-
UP FOR AUCTION ARE THESE KKT FMX GOLD PEDALS 9/16 THREADS BMX OLD SCHOOL FOR USING ON THREE PIECE CRANKS THEY ARE USED BUT IN NICE CONDITION THOUGH SOME SCRATCHES AT THE FRONT OF THE CAGES. THEY STILL SPIN NICE AND SMOOTH SUITABLE FOR ANY OLD SCHOOL BMX PROJECT DONT LET" EM GO AS OLD SCHOOL ITEMS ARE GETTING HARDER TO FIND EVERY DAY SHIPPING WORLDWIDE IS AVAILABLE(ASK FOR RATE) PLEASE ASK ANY QUESTION BEFORE BIDDING THANK YOU FOR LOOKING AND GOD BLESS
Old School Hutch Pro Pedals. 1/2" spindles. Very nice original condition. Hard to find this nice. Cages have a few bent teeth. If Needed) I have a set of 9/16 spindles I can swap out with. However. I would prefer to keep this set original.
up for auction or buy it now is this se racing bmx bike 29 inch wheels. all original. in like new condition no scratches just one small chip on the decal and paint on the fork you can see in the pictures. very minor really. this thing is fast and huge. i like to see it as a bmx on steroids. lol. no reserve on this item. returns are accepted. feel free to message me with any questions and be sure to check out my other items thanks for looking. Check out my!
YOU ARE BIDDING ON A USED: JIFFY 9" ICE AUGER ASSEMBLY RIPPER BLADE AND INCLUDES BLADE PROTECTOR RETAIL: $175.95 STARTING BID: $0.99 NO RESERVE! LOW STARTING BID! BID HERE AND SAVE! All sales final– sold as-is I charge only actual shipping charges! No markups or handling fees of any kind! All winning bidders must pay within THREE days of winning the auction. PAYPAL ONLY! Item will ship when payment is received! CHECK OUT MY OTHER AUCTIONS! THANKS FOR LOOKING AND HAPPY BIDDING!
you are bidding on used vintage BMX handlebars. Bars were at one time anodized before they were painted over(see pics) Bars are super light(less than 18oz. I'm not sure what brand. They are about 22 1/2 inch in length. Please see pictures before bidding. Item sold as is. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fv%7F.rpn35%3E-13cd03c2678-0x105-
Old School Tuf Neck Stem. Very good condition. Original Tuff Potts mod.
For sale is a SE Racing PK Ripper Aluminum frame Answer Alumilite-Ti gold expert wheelset Answer Scythe Pro carbon fork TRP carbon. Titanium and aluminum brake set-signature series AC 3 piece cranks 42 tooth gold answer sprocket Wellgo platform/spd pedals carbon seat post SE racing leather saddle Nitrous bars Drive Twin BMX stem-gold Pictures don't show how nice this bike really is! This bike is extremely trick. A new bike this good costs over $1500!
Elina BMX lightning bolt seat black in almost new condition has one minor scratch on the right rear edge(see pic) Not bad at all or very noticeable it looks unused to me but I am listing as used shipping is $10.85 by USPS priority mail insured good luck and happy bidding
http:www.tuniq.com.tw/Power/Ripper1000W.html#04" Tuniq Ripper 1000 Watt PDU I absolutely love this power supply. High quality. High wattage output, low cost. It has been very reliable and if you go to the link provided above, you'll just how awesome this power supply is. MODEL: PSU-RIP1000-BK PSU-RIP1000-EUAP-BK PSU-RIP1000-UKAP-BK. SPECIFICATIONS Product Number PSU-RIP1000-BK. Power 1000W. Dimension 160mm(L) x 150mm(W) x 86mm(H) Switches ATX Logic on-off additional power rocker switch. Power Factor PF 0.95. Cooling System 140mm Fan. 1900RPM±10% Noise 27 dBA at 1300RPM. Efficiency Up to 80% Hold-up Time 16 ms. INPUT Input Voltage 100-240VAC. Input Frequency Range 47~63Hz. MTBF 100.000 hrs minimum(at 25℃) Input Current 100Vac/13A max. OUTPUT Max/Min. Regulation*1. Ripple& Noise*2. Output. +5V 30A/0.2A. ±5% 70mV/100mV. ... more180W. +3.3V 28A/0.1A. ±5% 70mV/100mV. +12V1 20A/0.1A. ±5% 120mV/200mV. 900W. +12V2 20A/0.5A. ±5% 120mV/200mV. +12V3 30A/0A. ±5% 120mV/200mV. +12V4 30A/0A. ±5% 120mV/200mV. 12V 0.8A/0A. ±10% 150mV/200mV. 9.6W. +5Vsb 3.0A/0.1A. ±5% 70mV/100mV. 15W. Total Power 1000W. +5Vsb' operate at 3.0A max load base on PS-ON mode. If PS-OFF +5Vsb only operate at 3A max load. Add 0.1µF capacitors across output terminal during ripple& noise test.
Welcome To My Auctions. NO INTERNATIONAL SHIPPING ON FRAMES. You are bidding on a Early Dyno Compe Frame with New Sticker Set. The paint is so thick i cant read the serial number. Great bike to restore. The drop outs in the back need work. Easy fix with some heat. Look at the pictures what you see is what you get. Not sure if the sticker set is complete look at pictures. Oldschool GT Pk Ripper SE Haro L@K. And What you see is what you get. If you have a question please ask. Please look at the pictures Check my other auctions everyday I have 10.000 items to sell. Check everyday for new items We will combine shipping on multiple auctions/purchases that you make with us on a single calendar date. We also reserve the right to REFUSE to combine a purchase if the package would be to large or heavy If you have any questions please ask ITEM MUST ... moreBE PAID WITH IN 4 BUSINESS DAYS unless other arrangments are made. Powered by The free listing tool. List your items fast and easy and manage your active items.
OLD SCHOOL BMX XCALIBER SILVER SEATCLAMP IN GREAT USED CONDITION WORTHY OF GOING ON A SHOWBIKE BUILD. THIS IS FROM THE VERY EARLY 1980'S PERFECT FOR ANY OLD SCHOOL BMX SUCH AS A PK RIPPER. TORKER, CW, VECTOR, SKYWAY, CURTIS ETC ETC. CHECK MY OTHER LISTINGS FOR MORE OLD SCHOOL BMX GOODIES.
UP FOR AUCTION IS THIS SUGINO 43 TEETH CHAINRING SPROCKET BMX OLD SCHOOL THIS CHAINRING WAS POLISHED TO A MIRROR AND NEW DECALS APPLIED I WANT TO POINT OUT THAT THE HOLE WHERE THE DRIVING BOLT IS INSERTED HAS BEEN DRILLED BIGGER TO MAKE IT FIT WITH THREE PIECE CRANKS SUCH AS REDLINE FLIGHT OR PROFILE THEETH ARE OK DONT LET" IT GO AS OLD SCHOOL ITEMS ARE GETTING HARDER TO FIND EVERY DAY SHIPPING WORLDWIDE IS AVAILABLE(ASK FOR RATE) I DO COMBINE SHIPPING PLEASE ASK ANY QUESTIONS BEFORE BIDDING THANK YOU FOR LOOKING AND GOD BLESS
Old School Bmx Tange SC 2 Seat Clamp. Very nice condition.
THESE WOULD LOOK GREAT ON YOUR BABY BLUE PK RIPPER. STILL PRETTY SOFT. HAVE ALOT OF USE LEFT IN THEM. YOU WILL RECEIVE THE EXACT ITEM YOU SEE IN THE PHOTO. THANK YOU FOR LOOKING AND GOOD LUCK!
You are bidding on"ONE" CRUPI BMX seat post. Crupi’s seat post brings you the best of everything in a seat post. CNC machined from 2014 aluminum. This seat is lightweight and strong. This post gives you plenty of seat adjustment so you can position your seat right where you want to. This post is only available in 26.8mm, which fits all Crupi Pro size frames and most other aluminum race frames. 300mm in overall length gives you lots of room to flick your Rhythm Quick Release seat clamp and pop the post up after your race for your cool down period. Posted with
Up for auction is a set of early 90s Se landing gear forks in very nice condition chrome is nice as well comes with bearings ect. Posted with
2X Imakat atsu Devil Ripper Zinga Crank Baits. Free Shipping. One lure has a green hologram body with black st ripes and an orange underneath. The other is brand new but it is missing the pro p. It is silver with a green/black top. Check out my other lures. Free shipping people.It will take 11-23 business days to arrive depending on your country. Enjoy
Gibson Grabber/Ripper Bass Vintage Case 1970's This auction is for a vintage used Gibson case for a Grabber or Ripper bass. It is from the 1970's& features a black tolex exterior with a silver Gibson logo. a plush purple velour interior. It is in very good condition with some marks& dings. The black tolex is loose along 1 bottom edge near the back latch. All latches& hinges are intact& functioning. One latch is damaged slightly, but still works, see pics. All the metal feet are also intact. The purple interior is clean& nice with no excessive wear marks& no bad smells. Inside dimensions are 15 1/4" lower bout, 11 3/4" upper bout, 47 1/4" long, 2 1/2" deep, plus the lid depth of about 1" Sold"AS IS" no returns. No BIN or ending aution early. Payment via paypal is due wihtin ... more5 days of auction ending. No international shipping. Ships only to the USA. Local pickup welcomed. I only respond to questions I can answer. Or those not already answered in the description.
Good frame not sure what year. Looks like a hairline crack starting on seat post area.nice paint job new decals. Posted with eBay Mobile this is a mini pk ripper
This is a 1983 looptail pk ripper. The seat tube is cracked and has been rewelded. It's a strong weld and holds a post And clamp without issues. There is also a crank rub on the rear chain stay. See pics. This is certainly a worthy rider. Ask any and all questions you wish before bidding. Posted with
Attention! I am relisting this bike to to a faulty ebay bidder and fraudulant Actvity on the last Auction. There was an unregistered user outbidding everyone and it resulted in a no payment of course. Ebay Notified me of the fraud and removed the user and in return removed the entire ad and all of it's content. This Auction will be a fixed listing with immediate payment required because of that event. If you have intentions to defraud me please find something better to do with your time and move on! I am selling my early 90's SE Racing PK Ripper that has been completely restored. I built this bike to keep forever but unfortunetely things chande and I could use the money for a car project and the space as well. 1993 or 4 Se Racing P.K. Ripper frame. Bars and origanal Landing gear fork. Fresh Glassbead and Gloss black powdercoat. Fresh ... moreNOS Decal Kit. BRand new everything including Skyways Tuff 2's. Redline Flite cranks, Anodized pedals, Kenda Blue line tires, black anodized seat post, guts, stem, Pitbull 2 brakes. New SE racing Grips and seat and much more! Thousands invested on meticulous restore. Shipping is to the Cont US 48 States. All others are extra.
SE RACING BMX HANDLEBARS.ORIGINAL FINISH HAS SCRATCHES,AND OVERSPRAY ON THEM.PERFECT CANIDATE FOR A REPAINT OR POWDERCOAT TO MATCH YOUR BIKE. GREAT BAR FOR ALL AROUND RIDING OR RACING. 9" RISE AND 27" WIDE.THE RISE WAS MEASURED FROM CENTER OF STEM CLAMPING AREA STRAIGHT UP TO TOP OF HANDLEBAR. SOLD AS IS SO ASK QUESTIONS I DONT SHIP INTERNATIONAL SHIPPING PRICE QUOTED FOR THE LOWER 48 STATES ONLY
This is a very nice. Used, Gibson LS9 Ripper bass. It is a natural blond finish that has mellowed to a really pretty golden“tobacco” color. Based on the serial#171790 and the research I’ve done on the internet. I believe this bass was manufactured in 1973– the first model year for the Ripper. But I am not 100% sure, so please do your own research and verify for yourself if this matters to you. It is a 34 ½” long scale neck. With the special Ripper Humbucker pickups and the unique“Q-system” electronics, which gives the Ripper an impressive array of tones. I had the bass completely gone over by a top notch luthier about 2 years ago and everything was cleaned and adjusted including setting the intonation. Adjusting the neck, cleaning and balancing the electronics, etc. It plays and sounds terrific, and I have only played it about half a ... moredozen times since then. It has a few minor dings and scratches, and some superficial“belt rash” on the back, but otherwise is in great condition. Please note that it is missing the cover plate for the truss rod and the cover plate for the bridge. Also included with the bass is a Coffin hard shell case. As with all my items. This is being sold on an"as is" basis, so if you have any questions PLEASE e-mail before bidding. Please note my auction terms state I only ship to the USA and Canada. All buyers are required to pay by PayPal only! Happy bidding! Items sold on an as-is basis. Returns accepted only if the item description contained an error or was factually incorrect. If you have questions ask before you buy!